This makes mergetool consistent with Documentation/CodingGuidelines.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds completion for difftool's --tool flag.
The known diff tool names were also consolidated into
a single variable.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
difftool now supports difftool.prompt so that users do not have to
pass --no-prompt or hit enter each time a diff tool is launched.
The --prompt flag overrides the configuration variable.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7800-difftool.sh tests the various command-line flags,
git-config variables, and environment settings supported by
git-difftool.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This prepares 'git-difftool' and its documentation for
mainstream use.
'git-difftool-helper' became 'git-difftool--helper'
since users should not use it directly.
'git-difftool' was added to the list of commands as
an ancillaryinterrogator.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds diffuse as a built-in merge tool.
Signed-off-by: Sebastian Pipping <sebastian@pipping.org>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is another consistency cleanup to make git-difftool's options
match git-mergetool.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I don't even know what $COMSPEC means so let's be safe and use the
same perly $^O test add--interactive uses. While we're at it, make
git-difftool match the prevalent git-perl style.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most users find the backup file feature annoying and there's no
need for it since diff is supposed to be a read-only operation.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We shouldn't try to merge files when using difftool, so remove
any merge-specific options.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
TortoiseMerge comes with TortoiseSVN or TortoiseGit for Windows. It can
only be used as a merge tool with an existing base file. It cannot be
used without a base nor as a diff tool.
The documentation only mentions the slash '/' as command line option
prefix, which refused to work, but the parser also accepts the dash '-'
See http://code.google.com/p/msysgit/issues/detail?id=226
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Under Windows vimdiff and gvimdiff are not available as symbolic links,
but as batch files vimdiff.bat and gvimdiff.bat. These files weren't
found by 'type vimdiff' which led to the following error:
The merge tool vimdiff is not available as 'vimdiff'
Even if they were found, it wouldn't work to invoke these batch files
from git-mergetool.
To solve this, use vim and gvim (vim.exe and gvim.exe) and pass the -d
command line switch over to them.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a cleanup patch to make it easier to use the
"show_bisect_vars" function and take advantage of the rev_list_info
struct.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch removes the last static variables that were used in
the "show_commit" function.
To do that, we create a new "rev_list_info" struct that we will pass
in the "void *data" argument to "show_commit".
This means that we have to change the first argument to
"show_bisect_vars" too.
While at it, we also remove a "struct commit_list *list" variable
in "cmd_rev_list" that is not really needed.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The goal of this patch is to get rid of the "static struct rev_info
revs" static variable in "builtin-rev-list.c".
To do that, we need to pass the revs to the "show_commit" function
in "builtin-rev-list.c" and this in turn means that the
"traverse_commit_list" function in "list-objects.c" must be passed
functions pointers to functions with 2 parameters instead of one.
So we have to change all the callers and all the functions passed
to "traverse_commit_list".
Anyway this makes the code more clean and more generic, so it
should be a good thing in the long run.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Other pages use --option=<argument>, not --option='argument', do the
same here.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function took a "refinfo" object which is unnecessarily
restrictive; it only ever looked at the refname field. This
patch refactors it to take just the ref name as a string.
While we're touching the relevant lines, let's give it
consistent memory semantics. Previously, some code paths
would return an allocated string and some would return the
original string; now it will always return a malloc'd
string.
This doesn't actually fix a bug or a leak, because
for-each-ref doesn't clean up its memory, but it makes the
function a lot less surprising for reuse (which will
happen in a later patch).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the term "toplevel of the work tree" in gitattributes.txt and
gitignore.txt to define the limits of the search for those files.
Signed-off-by: Jason Merrill <jason@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise, the sentence "Defaults to HEAD." can be mis-read to mean
that "git checkout -- hello.c" checks-out from HEAD.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command "git checkout" checks out from the index by default, not
HEAD (the introducing comment were correct, but the detailled
explanation added below were not).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, git remote update <remote> would fail unless there was
a remote group configured with the same name as the remote.
git remote update will now fall back to using the remote if no matching
group can be found.
This enables "git remote update -p <remote>..." to fetch and prune one
or more remotes, for example.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, there was no easy way to check for the existence of a
configured remote. remote_get for example would always create the remote
"on demand".
This new function returns 1 if the remote is configured, 0 otherwise.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previosly, git remote update <non-existing-group> would just silently fail
and do nothing. Now it will report an error saying that the group does
not exist.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/name-branch:
Don't permit ref/branch names to end with ".lock"
check_ref_format(): tighten refname rules
strbuf_check_branch_ref(): a helper to check a refname for a branch
Fix branch -m @{-1} newname
check-ref-format --branch: give Porcelain a way to grok branch shorthand
strbuf_branchname(): a wrapper for branch name shorthands
Rename interpret/substitute nth_last_branch functions
Conflicts:
Documentation/git-check-ref-format.txt
* jc/shared-literally:
t1301: loosen test for forced modes
set_shared_perm(): sometimes we know what the final mode bits should look like
move_temp_to_file(): do not forget to chmod() in "Coda hack" codepath
Move chmod(foo, 0444) into move_temp_to_file()
"core.sharedrepository = 0mode" should set, not loosen
* sb/format-patch-patchname:
format_sanitized_subject: Don't trim past initial length of strbuf
log-tree: fix patch filename computation in "git format-patch"
format-patch: --numbered-files and --stdout aren't mutually exclusive
format-patch: --attach/inline uses filename instead of SHA1
format-patch: move get_patch_filename() into log-tree
format-patch: pass a commit to reopen_stdout()
format-patch: construct patch filename in one function
pretty.c: add %f format specifier to format_commit_message()
A handful of random personal preference:
- Force sans-serif for the text.
- Quote code sample literal inside a single-quote pair.
- Show emphasis in blue-green italics.
- Do not use itarlics for term definition, but show them in navy.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you regularly create patches which require a Signed-off: line you may
want to make it your default to add that line. It also helps you not to forget
to add the -s/--signoff switch.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds --committer-date-is-author-date, --ignore-date, and --no-utf8
options. The --binary option is removed, as it was made a no-op by
cb3a160. The option list is also sorted alphabetically.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the --prune (or -p) option, git remote update will also prune
all the remotes that it fetches. Previously, you had to do a manual
git remote prune <remote> for each of the remotes you wanted to
prune, and this could be tedious with many remotes.
A single command will now update a set of remotes, and remove all
stale branches: git remote update -p [group]
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prune_remote will be used in update(), so this function was split
out to avoid code duplication.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When doing:
eval "git bisect--helper --next-vars" | {
while read line
do
echo "$line &&"
done
echo ':'
}
the result code comes from the last "echo ':'", not from running
"git bisect--helper --next-vars".
This patch gets rid of the need to string together the line from
the output of "git bisect--helper" with "&&" in the calling script
by making "git bisect--helper --next-vars" return output variables
already in that format.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of "int show_all, int show_tried" we now only pass "int flags",
because we will add one more flag in a later patch.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds some tests to check that "git bisect" works fine when
passing paths to "git bisect start" to reduce the number of
bisection steps.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new "git bisect--helper" builtin. It should be faster and
safer instead of the old "filter_skipped" shell function. And it
is a first step to move more shell code to C.
As the output is a little bit different we have to change the code
that interpret the results. But these changes improve code clarity.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed because "git bisect--helper" must read bisect paths
in "$GIT_DIR/BISECT_NAMES", so that a bisection can be performed only
on commits that touches paths in this file.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch implements a new "git bisect--helper" builtin plumbing
command that will be used to migrate "git-bisect.sh" to C.
We start by implementing only the "--next-vars" option that will
read bisect refs from "refs/bisect/", and then compute the next
bisect step, and output shell variables ready to be eval'ed by
the shell.
At this step, "git bisect--helper" ignores the paths that may
have been put in "$GIT_DIR/BISECT_NAMES". This will be fixed in a
later patch.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
instead of the specific one that was simpler but less efficient.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch implements a new "filter_skip" function in C in
"bisect.c" that will later replace the existing implementation in
shell in "git-bisect.sh".
An array is used to store the skipped commits. But the array is
not yet fed anything.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Actually, you have to set the -b option after the add command.
Signed-off-by: Julien Danjou <julien@danjou.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
