"git mailinfo" used in "git am" learned to make a best-effort
recovery of a patch corrupted by MUA that sends text/plain with
format=flawed option.
* rs/mailinfo-format-flowed:
mailinfo: support format=flowed
spatch transformation to replace boolean uses of !hashcmp() to
newly introduced oideq() is added, and applied, to regain
performance lost due to support of multiple hash algorithms.
* jk/cocci:
show_dirstat: simplify same-content check
read-cache: use oideq() in ce_compare functions
convert hashmap comparison functions to oideq()
convert "hashcmp() != 0" to "!hasheq()"
convert "oidcmp() != 0" to "!oideq()"
convert "hashcmp() == 0" to hasheq()
convert "oidcmp() == 0" to oideq()
introduce hasheq() and oideq()
coccinelle: use <...> for function exclusion
Refreshing the index is usually very fast, but it can still take a
long time sometimes. Cold cache is one. Or copying a repo to a new
place (*). It's good to show something to let the user know "git
status" is not hanging, it's just busy doing something.
(*) In this case, all stat info in the index becomes invalid and git
falls back to rehashing all file content to see if there's any
difference between updating stat info in the index. This is quite
expensive. Even with a repo as small as git.git, it takes 3
seconds.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent addition of "directory rename" heuristics to the
merge-recursive backend makes the command susceptible to false
positives and false negatives. In the context of "git am -3",
which does not know about surrounding unmodified paths and thus
cannot inform the merge machinery about the full trees involved,
this risk is particularly severe. As such, the heuristic is
disabled for "git am -3" to keep the machinery "more stupid but
predictable".
* en/directory-renames-nothanks:
am: avoid directory rename detection when calling recursive merge machinery
merge-recursive: add ability to turn off directory rename detection
t3401: add another directory rename testcase for rebase and am
Let's say you have the following three trees, where Base is from one commit
behind either master or branch:
Base : bar_v1, foo/{file1, file2, file3}
branch: bar_v2, foo/{file1, file2}, goo/file3
master: bar_v3, foo/{file1, file2, file3}
Using git-am (or am-based rebase) to apply the changes from branch onto
master results in the following tree:
Result: bar_merged, goo/{file1, file2, file3}
This is not what users want; they did not rename foo/ -> goo/, they only
renamed one file within that directory. The reason this happens is am
constructs fake trees (via build_fake_ancestor()) of the following form:
Base_bfa : bar_v1, foo/file3
branch_bfa: bar_v2, goo/file3
Combining these two trees with master's tree:
master: bar_v3, foo/{file1, file2, file3},
You can see that merge_recursive_generic() would see branch_bfa as renaming
foo/ -> goo/, and master as just adding both foo/file1 and foo/file2. As
such, it ends up with goo/{file1, file2, file3}
The core problem is that am does not have access to the original trees; it
can only construct trees using the blobs involved in the patch. As such,
it is not safe to perform directory rename detection within am -3.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add best-effort support for patches sent using format=flowed (RFC 3676).
Remove leading spaces ("unstuff"), remove soft line breaks (indicated
by space + newline), but leave the signature separator (dash dash space
newline) alone.
Warn in git am when encountering a format=flowed patch, because any
trailing spaces would most probably be lost, as the sending MUA is
encouraged to remove them when preparing the email.
Provide a test patch formatted by Mozilla Thunderbird 60 using its
default configuration. It reuses the contents of the file mailinfo.c
before and after this patch.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're moving away from the_index in this code. "struct index_state *"
could be added to struct apply_state. But let's aim long term and put
struct repository here instead so that we could even avoid more global
states in the future. The index will be available via
apply_state->repo->index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recursive merge strategy did not properly ensure there was no
change between HEAD and the index before performing its operation,
which has been corrected.
* en/dirty-merge-fixes:
merge: fix misleading pre-merge check documentation
merge-recursive: enforce rule that index matches head before merging
t6044: add more testcases with staged changes before a merge is invoked
merge-recursive: fix assumption that head tree being merged is HEAD
merge-recursive: make sure when we say we abort that we actually abort
t6044: add a testcase for index matching head, when head doesn't match HEAD
t6044: verify that merges expected to abort actually abort
index_has_changes(): avoid assuming operating on the_index
read-cache.c: move index_has_changes() from merge.c
`git merge-recursive` does a three-way merge between user-specified trees
base, head, and remote. Since the user is allowed to specify head, we can
not necesarily assume that head == HEAD.
Modify index_has_changes() to take an extra argument specifying the tree
to compare against. If NULL, it will compare to HEAD. We then use this
from merge-recursive to make sure we compare to the user-specified head.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modify index_has_changes() to take a struct istate* instead of just
operating on the_index. This is only a partial conversion, though,
because we call do_diff_cache() which implicitly assumes work is to be
done on the_index. Ongoing work is being done elsewhere to do the
remainder of the conversion, and thus is not duplicated here. Instead,
a simple check is put in place until that work is complete.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of lookup_commit to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of lookup_tree
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continuing with the idea to programatically enumerate various
pieces of data required for command line completion, teach the
codebase to report the list of configuration variables
subcommands care about to help complete them.
* nd/complete-config-vars:
completion: complete general config vars in two steps
log-tree: allow to customize 'grafted' color
completion: support case-insensitive config vars
completion: keep other config var completion in camelCase
completion: drop the hard coded list of config vars
am: move advice.amWorkDir parsing back to advice.c
advice: keep config name in camelCase in advice_config[]
fsck: produce camelCase config key names
help: add --config to list all available config
fsck: factor out msg_id_info[] lazy initialization code
grep: keep all colors in an array
Add and use generic name->id mapping code for color slot parsing
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (42 commits)
merge-one-file: compute empty blob object ID
add--interactive: compute the empty tree value
Update shell scripts to compute empty tree object ID
sha1_file: only expose empty object constants through git_hash_algo
dir: use the_hash_algo for empty blob object ID
sequencer: use the_hash_algo for empty tree object ID
cache-tree: use is_empty_tree_oid
sha1_file: convert cached object code to struct object_id
builtin/reset: convert use of EMPTY_TREE_SHA1_BIN
builtin/receive-pack: convert one use of EMPTY_TREE_SHA1_HEX
wt-status: convert two uses of EMPTY_TREE_SHA1_HEX
submodule: convert several uses of EMPTY_TREE_SHA1_HEX
sequencer: convert one use of EMPTY_TREE_SHA1_HEX
merge: convert empty tree constant to the_hash_algo
builtin/merge: switch tree functions to use object_id
builtin/am: convert uses of EMPTY_TREE_SHA1_BIN to the_hash_algo
sha1-file: add functions for hex empty tree and blob OIDs
builtin/receive-pack: avoid hard-coded constants for push certs
diff: specify abbreviation size in terms of the_hash_algo
upload-pack: replace use of several hard-coded constants
...
The only benefit from this move (apart from cleaner code) is that
advice.amWorkDir should now show up in `git help --config`. There
should be no regression since advice config is always read by the
git_default_config().
While at there, use advise() like other code. We now get "hint: "
prefix and the output is stderr instead of stdout (which is also the
reason for the test update because stderr is checked in a following
test and the extra advice can fail it).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only thing these commands need is extra parseopt flag which can be
passed in by OPT_SET_INT_F() and it is a bit more compact than full
struct initialization.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In d8193743e0 (usage.c: add BUG() function, 2017-05-12), a new macro
was introduced to use for reporting bugs instead of die(). It was then
subsequently used to convert one single caller in 588a538ae5
(setup_git_env: convert die("BUG") to BUG(), 2017-05-12).
The cover letter of the patch series containing this patch
(cf 20170513032414.mfrwabt4hovujde2@sigill.intra.peff.net) is not
terribly clear why only one call site was converted, or what the plan
is for other, similar calls to die() to report bugs.
Let's just convert all remaining ones in one fell swoop.
This trick was performed by this invocation:
sed -i 's/die("BUG: /BUG("/g' $(git grep -l 'die("BUG' \*.c)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert several uses of EMPTY_TREE_SHA1_BIN to use the_hash_algo
and struct object_id instead.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is more consistent with the project style. The majority of Git's
source files use dashes in preference to underscores in their file names.
Signed-off-by: Stefan Beller <sbeller@google.com>
Refactoring the internal global data structure to make it possible
to open multiple repositories, work with and then close them.
Rerolled by Duy on top of a separate preliminary clean-up topic.
The resulting structure of the topics looked very sensible.
* sb/object-store: (27 commits)
sha1_file: allow sha1_loose_object_info to handle arbitrary repositories
sha1_file: allow map_sha1_file to handle arbitrary repositories
sha1_file: allow map_sha1_file_1 to handle arbitrary repositories
sha1_file: allow open_sha1_file to handle arbitrary repositories
sha1_file: allow stat_sha1_file to handle arbitrary repositories
sha1_file: allow sha1_file_name to handle arbitrary repositories
sha1_file: add repository argument to sha1_loose_object_info
sha1_file: add repository argument to map_sha1_file
sha1_file: add repository argument to map_sha1_file_1
sha1_file: add repository argument to open_sha1_file
sha1_file: add repository argument to stat_sha1_file
sha1_file: add repository argument to sha1_file_name
sha1_file: allow prepare_alt_odb to handle arbitrary repositories
sha1_file: allow link_alt_odb_entries to handle arbitrary repositories
sha1_file: add repository argument to prepare_alt_odb
sha1_file: add repository argument to link_alt_odb_entries
sha1_file: add repository argument to read_info_alternates
sha1_file: add repository argument to link_alt_odb_entry
sha1_file: add raw_object_store argument to alt_odb_usable
pack: move approximate object count to object store
...
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert write_index_as_tree and write_cache_as_tree to use struct
object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new "--show-current-patch" option gives an end-user facing way
to get the diff being applied when "git rebase" (and "git am")
stops with a conflict.
* nd/rebase-show-current-patch:
rebase: introduce and use pseudo-ref REBASE_HEAD
rebase: add --show-current-patch
am: add --show-current-patch
"git am" has learned the "--quit" option, in addition to the existing
"--abort" option; having the pair mirrors a few other commands like
"rebase" and "cherry-pick".
* nd/am-quit:
am: support --quit
Among the "in progress" commands, only git-am and git-merge do not
support --quit. Support --quit in git-am too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new command `git rebase --show-current-patch` is useful for seeing
the commit related to the current rebase state. Some however may find
the "git show" command behind it too limiting. You may want to
increase context lines, do a diff that ignores whitespaces...
For these advanced use cases, the user can execute any command they
want with the new pseudo ref REBASE_HEAD.
This also helps show where the stopped commit is from, which is hard
to see from the previous patch which implements --show-current-patch.
Helped-by: Tim Landscheidt <tim@tim-landscheidt.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is useful to see the full patch while resolving conflicts in a
rebase. The only way to do it now is
less .git/rebase-*/patch
which could turn out to be a lot longer to type if you are in a
linked worktree, or not at top-dir. On top of that, an ordinary user
should not need to peek into .git directory. The new option is
provided to examine the patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pointing the user to $GIT_DIR/rebase-apply may encourage them to mess
around in there, which is not a good thing. With this, the user does
not have to keep the path around somewhere (because after a couple of
commands, the path may be out of scrollback buffer) when they need to
look at the patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the definitions and declarations of commit_tree and
commit_tree_extended to use struct object_id and adjust all usages of
these functions.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No caller passes anything but "0" for this parameter, which
requests that the function ignore it completely. In fact, in
all of history there was only one such caller, and it went
away in 7f51f8bc2b (alias: use run_command api to execute
aliases, 2011-01-07).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge -s recursive" did not correctly abort when the index is
dirty, if the merged tree happened to be the same as the current
HEAD, which has been fixed.
* ew/empty-merge-with-dirty-index:
merge-recursive: avoid incorporating uncommitted changes in a merge
move index_has_changes() from builtin/am.c to merge.c for reuse
t6044: recursive can silently incorporate dirty changes in a merge
* ew/empty-merge-with-dirty-index-maint:
merge-recursive: avoid incorporating uncommitted changes in a merge
move index_has_changes() from builtin/am.c to merge.c for reuse
t6044: recursive can silently incorporate dirty changes in a merge
index_has_changes() is a function we want to reuse outside of just am,
making it also available for merge-recursive and merge-ort.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An infrastructure to define what hash function is used in Git is
introduced, and an effort to plumb that throughout various
codepaths has been started.
* bc/hash-algo:
repository: fix a sparse 'using integer as NULL pointer' warning
Switch empty tree and blob lookups to use hash abstraction
Integrate hash algorithm support with repo setup
Add structure representing hash algorithm
setup: expose enumerated repo info
Code clean-up in refs API implementation.
* mh/tidy-ref-update-flags:
refs: update some more docs to use "oid" rather than "sha1"
write_packed_entry(): take `object_id` arguments
refs: rename constant `REF_ISPRUNING` to `REF_IS_PRUNING`
refs: rename constant `REF_NODEREF` to `REF_NO_DEREF`
refs: tidy up and adjust visibility of the `ref_update` flags
ref_transaction_add_update(): remove a check
ref_transaction_update(): die on disallowed flags
prune_ref(): call `ref_transaction_add_update()` directly
files_transaction_prepare(): don't leak flags to packed transaction
Switch the uses of empty_tree_oid and empty_blob_oid to use the
current_hash abstraction that represents the current hash algorithm in
use.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A single-word "unsigned flags" in the diff options is being split
into a structure with many bitfields.
* bw/diff-opt-impl-to-bitfields:
diff: make struct diff_flags members lowercase
diff: remove DIFF_OPT_CLR macro
diff: remove DIFF_OPT_SET macro
diff: remove DIFF_OPT_TST macro
diff: remove touched flags
diff: add flag to indicate textconv was set via cmdline
diff: convert flags to be stored in bitfields
add, reset: use DIFF_OPT_SET macro to set a diff flag
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (25 commits)
refs/files-backend: convert static functions to object_id
refs: convert read_raw_ref backends to struct object_id
refs: convert peel_object to struct object_id
refs: convert resolve_ref_unsafe to struct object_id
worktree: convert struct worktree to object_id
refs: convert resolve_gitlink_ref to struct object_id
Convert remaining callers of resolve_gitlink_ref to object_id
sha1_file: convert index_path and index_fd to struct object_id
refs: convert reflog_expire parameter to struct object_id
refs: convert read_ref_at to struct object_id
refs: convert peel_ref to struct object_id
builtin/pack-objects: convert to struct object_id
pack-bitmap: convert traverse_bitmap_commit_list to object_id
refs: convert dwim_log to struct object_id
builtin/reflog: convert remaining unsigned char uses to object_id
refs: convert dwim_ref and expand_ref to struct object_id
refs: convert read_ref and read_ref_full to object_id
refs: convert resolve_refdup and refs_resolve_refdup to struct object_id
Convert check_connected to use struct object_id
refs: update ref transactions to use struct object_id
...
Even after working with this code for years, I still see this constant
name as "ref node ref". Rename it to make it's meaning clearer.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `DIFF_OPT_SET` macro and instead set the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_SET(&E, fld)
+ E.flags.fld = 1
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_SET(ptr, fld)
+ ptr->flags.fld = 1
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `DIFF_OPT_TST` macro and instead access the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_TST(&E, fld)
+ E.flags.fld
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_TST(ptr, fld)
+ ptr->flags.fld
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the callers already pass the hash member of struct object_id, so
update them to pass a pointer to the struct directly,
This transformation was done with an update to declaration and
definition and the following semantic patch:
@@
expression E1, E2, E3, E4;
@@
- resolve_refdup(E1, E2, E3.hash, E4)
+ resolve_refdup(E1, E2, &E3, E4)
@@
expression E1, E2, E3, E4;
@@
- resolve_refdup(E1, E2, E3->hash, E4)
+ resolve_refdup(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert update_ref, refs_update_ref, and write_pseudoref to use struct
object_id. Update the existing callers as well. Remove update_ref_oid,
as it is no longer needed.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have two users of `struct apply_state` and the related functionality
in apply.c. Each user sets up its `apply_state` by handing over a
pointer to its static `lock_file`. (Before 076aa2cbd (tempfile:
auto-allocate tempfiles on heap, 2017-09-05), we could never free
lockfiles, so making them static was a reasonable approach.)
Other than that, they never directly access their `lock_file`s, which
are instead handled by the functionality in apply.c.
To make life easier for the caller and to make it less tempting for a
future caller to mess with the lock, make apply.c fully responsible for
setting up the `lock_file`. As mentioned above, it is now safe to free a
`lock_file`, so we can make the `struct apply_state` contain an actual
`struct lock_file` instead of a pointer to one.
The user in builtin/apply.c is rather simple. For builtin/am.c, we might
worry that the lock state is actually meant to be inherited across
calls. But the lock is only taken as `apply_all_patches()` executes, and
code inspection shows that it will always be released.
Alternatively, we can observe that the lock itself is never queried
directly. When we decide whether we should lock, we check a related
variable `newfd`. That variable is not inherited, so from the point of
view of apply.c, the state machine really is reset with each call to
`init_apply_state()`. (It would be a bug if `newfd` and the lock status
were not in sync. The duplication of information in `newfd` and the lock
will be addressed in the next patch.)
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no longer any need to allocate and leak a `struct lock_file`.
The previous patch addressed an instance where we needed a minor tweak
alongside the trivial changes.
Deal with the remaining instances where we allocate and leak a struct
within a single function. Change them to have the `struct lock_file` on
the stack instead.
These instances were identified by running `git grep "^\s*struct
lock_file\s*\*"`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't reset the strbufs l2 and l3 before use as if they were static, but
release them at the end instead.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function close_pack_fd() needs to be temporarily made global. Its
scope will be restored to static in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git am -s" has been taught that some input may end with a trailer
block that is not Signed-off-by: and it should refrain from adding
an extra blank line before adding a new sign-off in such a case.
* pw/am-signoff:
am: fix signoff when other trailers are present
Commands like "git rebase" accepted the --rerere-autoupdate option
from the command line, but did not always use it. This has been
fixed.
* pw/sequence-rerere-autoupdate:
cherry-pick/revert: reject --rerere-autoupdate when continuing
cherry-pick/revert: remember --rerere-autoupdate
t3504: use test_commit
rebase -i: honor --rerere-autoupdate
rebase: honor --rerere-autoupdate
am: remember --rerere-autoupdate setting
If there was no 'Signed-off-by:' trailer but another trailer such as
'Reported-by:' then 'git am --signoff' would add a blank line between
the existing trailers and the added 'Signed-off-by:' line. e.g.
Rebase accepts '--rerere-autoupdate' as an option but only honors
it if '-m' is also given. Fix it for a non-interactive rebase by
passing on the option to 'git am' and 'git cherry-pick'.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Fix by using the code provided for this purpose in sequencer.c.
Change the tests so that they check the formatting of the
'Signed-off-by:' lines rather than just grepping for them.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Save the rerere-autoupdate setting so that it is remembered after
stopping for the user to resolve conflicts.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common pattern to free a piece of memory and assign NULL to the
pointer that used to point at it has been replaced with a new
FREE_AND_NULL() macro.
* ab/free-and-null:
*.[ch] refactoring: make use of the FREE_AND_NULL() macro
coccinelle: make use of the "expression" FREE_AND_NULL() rule
coccinelle: add a rule to make "expression" code use FREE_AND_NULL()
coccinelle: make use of the "type" FREE_AND_NULL() rule
coccinelle: add a rule to make "type" code use FREE_AND_NULL()
git-compat-util: add a FREE_AND_NULL() wrapper around free(ptr); ptr = NULL
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
Replace occurrences of `free(ptr); ptr = NULL` which weren't caught by
the coccinelle rule. These fall into two categories:
- free/NULL assignments one after the other which coccinelle all put
on one line, which is functionally equivalent code, but very ugly.
- manually spotted occurrences where the NULL assignment isn't right
after the free() call.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the result of the just-added coccinelle rule. This manually
excludes a few occurrences, mostly things that resulted in many
FREE_AND_NULL() on one line, that'll be manually fixed in a subsequent
change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We often try to open a file for reading whose existence is
optional, and silently ignore errors from open/fopen; report such
errors if they are not due to missing files.
* nd/fopen-errors:
mingw_fopen: report ENOENT for invalid file names
mingw: verify that paths are not mistaken for remote nicknames
log: fix memory leak in open_next_file()
rerere.c: move error_errno() closer to the source system call
print errno when reporting a system call error
wrapper.c: make warn_on_inaccessible() static
wrapper.c: add and use fopen_or_warn()
wrapper.c: add and use warn_on_fopen_errors()
config.mak.uname: set FREAD_READS_DIRECTORIES for Darwin, too
config.mak.uname: set FREAD_READS_DIRECTORIES for Linux and FreeBSD
clone: use xfopen() instead of fopen()
use xfopen() in more places
git_fopen: fix a sparse 'not declared' warning
A few codepaths in "checkout" and "am" working on an unborn branch
tried to access an uninitialized piece of memory.
* rs/checkout-am-fix-unborn:
am: check return value of resolve_refdup before using hash
checkout: check return value of resolve_refdup before using hash
The codepath in "git am" that is used when running "git rebase"
leaked memory held for the log message of the commits being rebased.
* jk/am-leakfix:
am: shorten ident_split variable name in get_commit_info()
am: simplify allocations in get_commit_info()
am: fix commit buffer leak in get_commit_info()
Git sometimes gives an advice in a rhetorical question that does
not require an answer, which can confuse new users and non native
speakers. Attempt to rephrase them.
* ja/do-not-ask-needless-questions:
git-filter-branch: be more direct in an error message
read-tree -m: make error message for merging 0 trees less smart aleck
usability: don't ask questions if no reply is required
Convert most of the static functions to use struct object_id. In
addition, convert copy_notes_for_rewrite and its callers.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user provides "-h" on the command line, then our
parse_options() invocation will show a usage message and
quit. But if "-h" is the only argument, the git wrapper
behaves specially: it ignores our RUN_SETUP flag and calls
cmd_am() without having done repository setup at all. This
is due to 99caeed05 (Let 'git <command> -h' show usage
without a git dir, 2009-11-09).
Before cmd_am() calls parse_options(), though, it runs a few
other setup functions. One of these is am_state_init(),
which uses git_pathdup() to set up the default rebase-apply
path. But calling git_pathdup() when we haven't done
repository setup will fall back to using ".git". That's
mostly harmless (since we won't use the value anyway), but
is forbidden since b1ef400eec ("setup_git_env: avoid blind
fall-back to ".git"", 2016-10-20), and we now BUG().
We can't easily move that setup to after the parse_options()
call; the point is to set up defaults that are overwritten
by the option parsing. Instead, we'll detect the "-h" case
early and show the usage then. This matches the behavior of
other builtins which have a similar setup-ordering issue
(e.g., git-branch).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git sometimes gives an advice in a rhetorical question that does
not require an answer, which can confuse new users and non native
speakers. Attempt to rephrase them.
* ja/do-not-ask-needless-questions:
git-filter-branch: be more direct in an error message
read-tree -m: make error message for merging 0 trees less smart aleck
usability: don't ask questions if no reply is required
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (53 commits)
object: convert parse_object* to take struct object_id
tree: convert parse_tree_indirect to struct object_id
sequencer: convert do_recursive_merge to struct object_id
diff-lib: convert do_diff_cache to struct object_id
builtin/ls-tree: convert to struct object_id
merge: convert checkout_fast_forward to struct object_id
sequencer: convert fast_forward_to to struct object_id
builtin/ls-files: convert overlay_tree_on_cache to object_id
builtin/read-tree: convert to struct object_id
sha1_name: convert internals of peel_onion to object_id
upload-pack: convert remaining parse_object callers to object_id
revision: convert remaining parse_object callers to object_id
revision: rename add_pending_sha1 to add_pending_oid
http-push: convert process_ls_object and descendants to object_id
refs/files-backend: convert many internals to struct object_id
refs: convert struct ref_update to use struct object_id
ref-filter: convert some static functions to struct object_id
Convert struct ref_array_item to struct object_id
Convert the verify_pack callback to struct object_id
Convert lookup_tag to struct object_id
...
xfopen()
- provides error details
- explains error on reading, or writing, or whatever operation
- has l10n support
- prints file name in the error
Some of these are missing in the places that are replaced with xfopen(),
which is a clear win. In some other places, it's just less code (not as
clearly a win as the previous case but still is).
The only slight regresssion is in remote-testsvn, where we don't report
the file class (marks files) in the error messages anymore. But since
this is a _test_ svn remote transport, I'm not too concerned.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few codepaths in "checkout" and "am" working on an unborn branch
tried to access an uninitialized piece of memory.
* rs/checkout-am-fix-unborn:
am: check return value of resolve_refdup before using hash
checkout: check return value of resolve_refdup before using hash
Some platforms have ulong that is smaller than time_t, and our
historical use of ulong for timestamp would mean they cannot
represent some timestamp that the platform allows. Invent a
separate and dedicated timestamp_t (so that we can distingiuish
timestamps and a vanilla ulongs, which along is already a good
move), and then declare uintmax_t is the type to be used as the
timestamp_t.
* js/larger-timestamps:
archive-tar: fix a sparse 'constant too large' warning
use uintmax_t for timestamps
date.c: abort if the system time cannot handle one of our timestamps
timestamp_t: a new data type for timestamps
PRItime: introduce a new "printf format" for timestamps
parse_timestamp(): specify explicitly where we parse timestamps
t0006 & t5000: skip "far in the future" test when time_t is too limited
t0006 & t5000: prepare for 64-bit timestamps
ref-filter: avoid using `unsigned long` for catch-all data type
The codepath in "git am" that is used when running "git rebase"
leaked memory held for the log message of the commits being rebased.
* jk/am-leakfix:
am: shorten ident_split variable name in get_commit_info()
am: simplify allocations in get_commit_info()
am: fix commit buffer leak in get_commit_info()
There has been a bug report by a corporate user that stated that
"spelling mistake of stash followed by a yes prints character 'y'
infinite times."
This analysis was false. When the spelling of a command contains
errors, the git program tries to help the user by providing candidates
which are close to the unexisting command. E.g Git prints the
following:
git: 'stahs' is not a git command. See 'git --help'.
Did you mean this?
stash
and then exits.
The problem with this hint is that it is not formally indicated as an
hint and the user is in fact encouraged to reply to the question,
whereas the Git command is already finished.
The user was unlucky enough that it was the command he was looking
for, and replied "yes" on the command line, effectively launching the
`yes` program.
The initial error is that the Git programs, when launched in
command-line mode (without interaction) must not ask questions,
because these questions would normally require a user input as a reply
that they won't handle indeed. That's a source of confusion on UX
level.
To improve the general usability of the Git suite, the following rule
was applied:
if the sentence
* appears in a non-interactive session
* is printed last before exit
* is a question addressing the user ("you")
the sentence is turned into affirmative and proposes the option.
The basic rewording of the question sentences has been extended to
other spots found in the source.
Requested at https://github.com/git/git-scm.com/issues/999 by rpai1
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert parse_tree_indirect to take a pointer to struct object_id.
Update all the callers. This transformation was achieved using the
following semantic patch and manual updates to the declaration and
definition. Update builtin/checkout.c manually as well, since it uses a
ternary expression not handled by the semantic patch.
@@
expression E1;
@@
- parse_tree_indirect(E1.hash)
+ parse_tree_indirect(&E1)
@@
expression E1;
@@
- parse_tree_indirect(E1->hash)
+ parse_tree_indirect(E1)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed to convert parse_tree_indirect.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename this function and convert it to take a pointer to struct
object_id.
This is a prerequisite for converting get_reference, which is needed to
convert parse_object.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the lookup_tree function to take a pointer to struct object_id.
The commit was created with manual changes to tree.c, tree.h, and
object.c, plus the following semantic patch:
@@
@@
- lookup_tree(EMPTY_TREE_SHA1_BIN)
+ lookup_tree(&empty_tree_oid)
@@
expression E1;
@@
- lookup_tree(E1.hash)
+ lookup_tree(&E1)
@@
expression E1;
@@
- lookup_tree(E1->hash)
+ lookup_tree(E1)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert lookup_commit, lookup_commit_or_die,
lookup_commit_reference, and lookup_commit_reference_gently to take
struct object_id arguments.
Introduce a temporary in parse_object buffer in order to convert this
function. This is required since in order to convert parse_object and
parse_object_buffer, lookup_commit_reference_gently and
lookup_commit_or_die would need to be converted. Not introducing a
temporary would therefore require that lookup_commit_or_die take a
struct object_id *, but lookup_commit would take unsigned char *,
leaving a confusing and hard-to-use interface.
parse_object_buffer will lose this temporary in a later patch.
This commit was created with manual changes to commit.c, commit.h, and
object.c, plus the following semantic patch:
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1.hash, E2)
+ lookup_commit_reference_gently(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1->hash, E2)
+ lookup_commit_reference_gently(E1, E2)
@@
expression E1;
@@
- lookup_commit_reference(E1.hash)
+ lookup_commit_reference(&E1)
@@
expression E1;
@@
- lookup_commit_reference(E1->hash)
+ lookup_commit_reference(E1)
@@
expression E1;
@@
- lookup_commit(E1.hash)
+ lookup_commit(&E1)
@@
expression E1;
@@
- lookup_commit(E1->hash)
+ lookup_commit(E1)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1.hash, E2)
+ lookup_commit_or_die(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1->hash, E2)
+ lookup_commit_or_die(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we fail to read, or parse, the file, we still want to close the file
descriptor and release the strbuf.
Reported via Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If resolve_refdup() fails it returns NULL and possibly leaves its hash
output parameter untouched. Make sure to use it only if the function
succeeded, in order to avoid accessing uninitialized memory.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The local ident_split variable is often mentioned three
times per line when dealing with its begin/end pointer
pairs. Let's use a shorter name which lets us get rid of
some long lines. Since this is a short self-contained
function, readability doesn't suffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After we call split_ident_line(), we have several begin/end
pairs for various parts of the ident. We then copy each into
a strbuf to create a single string, and then detach that
string. We can instead skip the strbuf entirely and just
duplicate the strings directly.
This is shorter, and it makes it more obvious that we are
not leaking the strbuf (we were not before, because every
code path either died or hit a strbuf_detach).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Calling logmsg_reencode() may allocate a buffer for the
commit message (because we need to load it from disk, or
because it needs re-encoded). We must "unuse" it afterwards
to free it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While handy, "git_path()" is a dangerous function to use as a
callsite that uses it safely one day can be broken by changes
to other code that calls it. Reduction of its use continues.
* jk/war-on-git-path:
am: drop "dir" parameter from am_state_init
replace strbuf_addstr(git_path()) with git_path_buf()
replace xstrdup(git_path(...)) with git_pathdup(...)
use git_path_* helper functions
branch: add edit_description() helper
bisect: add git_path_bisect_terms helper
"git rebase" learns "--signoff" option.
* gb/rebase-signoff:
rebase: pass --[no-]signoff option to git am
builtin/am: fold am_signoff() into am_append_signoff()
builtin/am: honor --signoff also when --rebasing
Various small fixes.
* rs/misc-cppcheck-fixes:
server-info: avoid calling fclose(3) twice in update_info_file()
files_for_each_reflog_ent_reverse(): close stream and free strbuf on error
am: close stream on error, but not stdin
Currently, Git's source code represents all timestamps as `unsigned
long`. In preparation for using a more appropriate data type, let's
introduce a symbol `parse_timestamp` (currently being defined to
`strtoul`) where appropriate, so that we can later easily switch to,
say, use `strtoull()` instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only caller of this function passes in a static buffer
returned from git_path(). This looks dangerous at first
glance, but turns out to be OK because the first thing we do
is xstrdup() the result.
Let's turn this into a git_pathdup(). That's slightly more
efficient (no extra copy), and makes it easier to audit for
dangerous git_path() invocations.
Since there's only a single caller, let's just set this
default path inside the init function. That makes the memory
ownership clear.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid closing stdin, but do close an actual input file on error exit.
Found with Cppcheck.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
