Put all items in order as they appear, and add comments.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test a variety of cases where a patch failed to apply to
p4 and had to be cleaned up.
If the patch failed to apply cleanly, do not try to remove
to-be-added files, as they have not really been added yet.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When editing the submit template, if no change was made to it,
git p4 offers a prompt "Submit anyway?". Answering "no" cancels
the submit.
Previously, a "no" answer behaves like a "[s]kip" answer to the
failed-patch prompt, in that it proceeded to try to apply the
rest of the commits. Instead, put users back into the new
"[s]kip / [c]ontinue" loop so that they can decide. This makes
both cases of patch failure behave identically.
The return code of git p4 after a "no" answer is now the same
as that for a "skip" due to failed patch; update a test to
understand this.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When applying a commit to the p4 workspace fails, a prompt
asks what to do next. This belongs up in run() instead
of in applyCommit(), where run() can notice, for instance,
that the prompt is unnecessary because this is the last commit.
Offer two options about how to continue at conflict: [s]kip or
[q]uit. Having an explicit "quit" option gives git p4 a chance
to clean up, show the applied-commit summary, and do tag export.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a patch failed to apply, these interactive options offered
to:
1) apply the patch anyway, leaving reject (.rej) files around, or,
2) write the patch to a file (patch.txt)
In both cases it suggested to invoke "git p4 submit --continue",
an unimplemented option.
While manually fixing the rejects and submitting the result might
work, there are many steps that must be done to the job properly:
* apply patch
* invoke p4 add and delete
* change executable bits
* p4 sync -f renamed/copied files
* extract commit message into p4 change description and
move Jobs lines out of description section
* set changelist owner for --preserve-user
Plus the following manual sync/rebase will cause conflicts too,
which must be resolved once again.
Drop these workflows. Instead users should do a sync/rebase in
git, fix the conflicts there, and do a clean "git p4 submit".
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a commit fails to apply cleanly to the p4 tree, an interactive
prompt asks what to do next. In all cases (skip, apply, write),
the behavior after the prompt had a few problems.
Change it so that it does not claim erroneously that all commits
were applied. Instead list the set of the patches under
consideration, and mark with an asterisk those that were
applied successfully. Like this example:
Applying 592f1f9 line5 in file1 will conflict
...
Unfortunately applying the change failed!
What do you want to do?
[s]kip this patch / [a]pply the patch forcibly and with .rej files / [w]rite the patch to a file (patch.txt) s
Skipping! Good luck with the next patches...
//depot/file1#4 - was edit, reverted
Applying b8db1c6 okay_commit_after_skip
...
Change 6 submitted.
Applied only the commits marked with '*':
592f1f9 line5 in file1 will conflict
* b8db1c6 okay_commit_after_skip
Do not try to sync and rebase unless all patches were applied.
If there was a conflict during the submit, there is sure to be one
at the rebase. Let the user to do the sync and rebase manually.
This changes how a couple tets in t9810-git-p4-rcs.sh behave:
- git p4 now does not leave files open and edited in the
client
- If a git commit contains a change to a file that was
deleted in p4, the test used to check that the sync/rebase
loop happened after the failure to apply the change. Since
now sync/rebase does not happen after failure, do not test
this. Normal rebase machinery, outside of git p4, will let
rebase --skip work.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code used to have a bug that ignores "--all-match", that requires
all "--grep" to have matched, when "--author" or "--committer" was used.
Make sure the bug will not be reintroduced.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are tests for this interaction already. Restructure slightly and
avoid any claims about --all-match.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--all-match" option is about "--grep", and does not affect how
"--author" or "--committer" limitation is applied.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The log --grep tests generate the expected out in different ways.
Make them all use command blocks so that subshells are avoided and the
expected output is easier to grasp visually.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, sparse complains as follows:
SP test-string-list.c
test-string-list.c:10:6: warning: symbol 'parse_string_list' was not \
declared. Should it be static?
test-string-list.c:18:6: warning: symbol 'write_list' was not \
declared. Should it be static?
test-string-list.c:25:6: warning: symbol 'write_list_compact' was not \
declared. Should it be static?
test-string-list.c:38:5: warning: symbol 'prefix_cb' was not \
declared. Should it be static?
In order to suppress the warnings, since the above symbols do not
need more than file scope, we simply include the static modifier
in their declaration.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge -Xtheirs" did not help content-level merge of binary
files; it should just take their version. Also "*.jpg binary" in
the attributes did not imply they should use the binary ll-merge
driver.
* jc/ll-merge-binary-ours:
ll-merge: warn about inability to merge binary files only when we can't
attr: "binary" attribute should choose built-in "binary" merge driver
merge: teach -Xours/-Xtheirs to binary ll-merge driver
Finishing touches to the recently graduated topic to introduce
"git branch --set-upstream-to" option.
* cn/branch-set-upstream-to:
completion: complete branch name for "branch --set-upstream-to="
completion: add --set-upstream-to and --unset-upstream
The code to wait for subprocess and remove it from our internal queue
wasn't quite right.
* dg/run-command-child-cleanup:
run-command.c: fix broken list iteration in clear_child_for_cleanup
We strip the prefix from "Re: subject" and also from a less common
"re: subject", but left even less common "RE: subject" intact.
* jc/mailinfo-RE:
mailinfo: strip "RE: " prefix
* mz/cherry-pick-cmdline-order:
cherry-pick/revert: respect order of revisions to pick
demonstrate broken 'git cherry-pick three one two'
teach log --no-walk=unsorted, which avoids sorting
* jc/maint-checkout-fileglob-doc:
gitcli: contrast wildcard given to shell and to git
gitcli: formatting fix
Document file-glob for "git checkout -- '*.c'"
Generate po/git.pot from v1.7.12-437-g1084f with these i18n update(s):
* i18n: mark more index-pack strings for translation
* i18n: write-tree: mark parseopt strings for translation
* i18n: verify-tag: mark parseopt strings for translation
* i18n: verify-pack: mark parseopt strings for translation
* i18n: update-server-info: mark parseopt strings for translation
* i18n: update-ref: mark parseopt strings for translation
* i18n: update-index: mark parseopt strings for translation
* i18n: tag: mark parseopt strings for translation
* i18n: symbolic-ref: mark parseopt strings for translation
* i18n: show-ref: mark parseopt strings for translation
* i18n: show-branch: mark parseopt strings for translation
* i18n: shortlog: mark parseopt strings for translation
* i18n: rm: mark parseopt strings for translation
* i18n: revert, cherry-pick: mark parseopt strings for translation
* i18n: rev-parse: mark parseopt strings for translation
* i18n: reset: mark parseopt strings for translation
* i18n: rerere: mark parseopt strings for translation
* i18n: status: mark parseopt strings for translation
* i18n: replace: mark parseopt strings for translation
* i18n: remote: mark parseopt strings for translation
* i18n: read-tree: mark parseopt strings for translation
* i18n: push: mark parseopt strings for translation
* i18n: prune: mark parseopt strings for translation
* i18n: prune-packed: mark parseopt strings for translation
* i18n: pack-refs: mark parseopt strings for translation
* i18n: pack-objects: mark parseopt strings for translation
* i18n: notes: mark parseopt strings for translation
* i18n: name-rev: mark parseopt strings for translation
* i18n: mv: mark parseopt strings for translation
* i18n: mktree: mark parseopt strings for translation
* i18n: merge: mark parseopt strings for translation
* i18n: merge-file: mark parseopt strings for translation
* i18n: merge-base: mark parseopt strings for translation
* i18n: ls-tree: mark parseopt strings for translation
* i18n: ls-files: mark parseopt strings for translation
* i18n: log: mark parseopt strings for translation
* i18n: init-db: mark parseopt strings for translation
* i18n: help: mark parseopt strings for translation
* i18n: hash-object: mark parseopt strings for translation
* i18n: grep: mark parseopt strings for translation
* i18n: gc: mark parseopt strings for translation
* i18n: fsck: mark parseopt strings for translation
* i18n: format-patch: mark parseopt strings for translation
* i18n: for-each-ref: mark parseopt strings for translation
* i18n: fmt-merge-msg: mark parseopt strings for translation
* i18n: fetch: mark parseopt strings for translation
* i18n: fast-export: mark parseopt strings for translation
* i18n: describe: mark parseopt strings for translation
* i18n: config: mark parseopt strings for translation
* i18n: count-objects: mark parseopt strings for translation
* i18n: commit: mark parseopt strings for translation
* i18n: column: mark parseopt strings for translation
* i18n: clone: mark parseopt strings for translation
* i18n: clean: mark parseopt strings for translation
* i18n: cherry: mark parseopt strings for translation
* i18n: checkout: mark parseopt strings for translation
* i18n: checkout-index: mark parseopt strings for translation
* i18n: check-attr: mark parseopt strings for translation
* i18n: cat-file: mark parseopt strings for translation
* i18n: branch: mark parseopt strings for translation
* i18n: blame: mark parseopt strings for translation
* i18n: add: mark parseopt strings for translation
* i18n: bisect--helper: mark parseopt strings for translation
* i18n: archive: mark parseopt strings for translation
* i18n: mark "style" in OPT_COLUMN() for translation
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Recent versions of Linux libc (later than 5.4.23) and glibc (2.x)
include a malloc() implementation which is tunable via environment
variables. When MALLOC_CHECK_ is set, a special (less efficient)
implementation is used which is designed to be tolerant against
simple errors, such as double calls of free() with the same argument,
or overruns of a single byte (off-by-one bugs). When MALLOC_CHECK_
is set to 3, a diagnostic message is printed on stderr
and the program is aborted.
Setting the MALLOC_PERTURB_ environment variable causes the malloc
functions in libc to return memory which has been wiped and clear
memory when it is returned.
Of course this does not affect calloc which always does clear the memory.
The reason for this exercise is, of course, to find code which uses
memory returned by malloc without initializing it and code which uses
code after it is freed. valgrind can do this but it's costly to run.
The MALLOC_PERTURB_ exchanges the ability to detect problems in 100%
of the cases with speed.
The byte value used to initialize values returned by malloc is the byte
value of the environment value. The value used to clear memory is the
bitwise inverse. Setting MALLOC_PERTURB_ to zero disables the feature.
This technique can find hard to detect bugs.
It is therefore suggested to always use this flag (at least temporarily)
when testing out code or a new distribution.
But the test suite can use also valgrind(memcheck) via 'make valgrind'
or 'make GIT_TEST_OPTS="--valgrind"'.
Memcheck wraps client calls to malloc(), and puts a "red zone" on
each end of each block in order to detect access overruns.
Memcheck already detects double free() (up to the limit of the buffer
which remembers pending free()). Thus memcheck subsumes all the
documented coverage of MALLOC_CHECK_.
If MALLOC_CHECK_ is set non-zero when running memcheck, then the
overruns that might be detected by MALLOC_CHECK_ would be overruns
on the wrapped blocks which include the red zones. Thus MALLOC_CHECK_
would be checking memcheck, and not the client. This is not useful,
and actually is wasteful. The only possible [documented] advantage
of using MALLOC_CHECK_ and memcheck together, would be if MALLOC_CHECK_
detected duplicate free() in more cases than memcheck because memcheck's
buffer is too small.
Therefore we don't use MALLOC_CHECK_ and valgrind(memcheck) at the
same time.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch does printf("%-*s", width, "foo") where "foo" can be a utf-8
string, but width is in bytes, not columns. For ASCII it's fine as one
byte takes one column. For utf-8, this may result in misaligned ref
summary table.
Introduce gettext_width() function that returns the string length in
columns (currently only supports utf-8 locales). Make the code use
TRANSPORT_SUMMARY(x) where the length is compensated properly in
non-English locales.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
