Apply "index-compatibility.pending.cocci" rule to "builtin/*", but
exclude those where we conflict with in-flight changes.
As a result some of them end up using only "the_index", so let's have
them use the more narrow "USE_THE_INDEX_VARIABLE" rather than
"USE_THE_INDEX_COMPATIBILITY_MACROS".
Manual changes not made by coccinelle, that were squashed in:
* Whitespace-wrap argument lists for repo_hold_locked_index(),
repo_read_index_preload() and repo_refresh_and_write_index(), in cases
where the line became too long after the transformation.
* Change "refresh_cache()" to "refresh_index()" in a comment in
"builtin/update-index.c".
* For those whose call was followed by perror("<macro-name>"), change
it to perror("<function-name>"), referring to the new function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mostly apply the part of "index-compatibility.pending.cocci" that
renames the global variables like "active_nr", which are a shorthand
to referencing (in that case) a struct member as "the_index.cache_nr".
In doing so move more of "index-compatibility.pending.cocci" to
"index-compatibility.cocci".
In the case of "active_nr" we'd have a textual conflict with
"ab/various-leak-fixes" in "next"[1]. Let's exclude that specific case
while moving the rule over from "pending".
1. 407b94280f8 (commit: discard partial cache before (re-)reading it,
2022-11-08)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply a selection of rules in "index-compatibility.pending.cocci"
tree-wide, and in doing so migrate them to
"index-compatibility.cocci".
As in preceding commits the only manual changes here are the macro
removals in "cache.h", and the update to the '*.cocci" rules. The rest
of the C code changes are the result of applying those updated rules.
Move rules for some rarely used cache compatibility macros from
"index-compatibility.pending.cocci" to "index-compatibility.cocci" and
apply them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 4aab5b46f4 (Make read-cache.c "the_index" free., 2007-04-01)
we've been undergoing a slow migration away from these macros, but
haven't made much progress since f8adbec9fe (cache.h: flip
NO_THE_INDEX_COMPATIBILITY_MACROS switch, 2019-01-24).
Let's move forward a bit by changing the users of those macros that
are rare enough that we can convert them in one go, and then remove
the compatibility shim.
The only manual change to the C code here is to "cache.h", the rest is
all the result of applying the new "index-compatibility.cocci".
Even though it's a one-off, let's keep the coccinelle rules for
now. We'll extend them in subsequent commits, and this will help
anything that's in-flight or out-of-tree to migrate.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git mv A B" in a sparsely populated working tree can be asked to
move a path from a directory that is "in cone" to another directory
that is "out of cone". Handling of such a case has been improved.
* sy/mv-out-of-cone:
builtin/mv.c: fix possible segfault in add_slash()
mv: check overwrite for in-to-out move
advice.h: add advise_on_moving_dirty_path()
mv: cleanup empty WORKING_DIRECTORY
mv: from in-cone to out-of-cone
mv: remove BOTH from enum update_mode
mv: check if <destination> is a SKIP_WORKTREE_DIR
mv: free the with_slash in check_dir_in_index()
mv: rename check_dir_in_index() to empty_dir_has_sparse_contents()
t7002: add tests for moving from in-cone to out-of-cone
A possible segfault was introduced in c08830de41 (mv: check if
<destination> is a SKIP_WORKTREE_DIR, 2022-08-09).
When running t7001 with SANITIZE=address, problem appears when running:
git mv path1/path2/ .
or
git mv directory ../
or
any <destination> that makes dest_path[0] an empty string.
The add_slash() call could segfault when path argument to it is an empty
string, because it makes an out-of-bounds read to decide if an extra
slash '/' needs to be appended to it.
As add_slash() is used to make sure that a valid pathname to a file in
the given directory can be made by appending a filename after the value
returned from it, if path is an empty string, we want to return it
as-is. The path to a file "F" in the top-level of the working tree
(i.e. path=="") is formed by appending "F" after "" (i.e. path) without
any slash in between.
So, just like the case where a non-empty path already ends with a slash,
return an empty path as-is.
Reported-by: Jeff King <peff@peff.net>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add checking logic for overwriting when moving from in-cone to
out-of-cone. It is the index version of the original overwrite logic.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an advice.
When the user use `git mv --sparse <dirty-path> <destination>`, Git
will warn the user to use `git add --sparse <paths>` then use
`git sparse-checkout reapply` to apply the sparsity rules.
Add a few lines to previous "move dirty path" tests so we can test
this new advice is working.
Suggested-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, moving from-in-to-out may leave an empty <source>
directory on-disk (this kind of directory is marked as
WORKING_DIRECTORY).
Cleanup such directories if they are empty (don't have any entries
under them).
Modify two tests that take <source> as WORKING_DIRECTORY to test
this behavior.
Suggested-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, moving an in-cone <source> to an out-of-cone <destination>
was not possible, mainly because such <destination> is a directory that
is not present in the working tree.
Change the behavior so that we can move an in-cone <source> to
out-of-cone <destination> when --sparse is supplied.
Notice that <destination> can also be an out-of-cone file path, rather
than a directory.
Such <source> can be either clean or dirty, and moving it results in
different behaviors:
A clean move should move <source> to <destination> in the index (do
*not* create <destination> in the worktree), then delete <source> from
the worktree.
A dirty move should move the <source> to the <destination>, both in the
working tree and the index, but should *not* remove the resulted path
from the working tree and should *not* turn on its CE_SKIP_WORKTREE bit.
Optional reading
================
We are strict about cone mode when <destination> is a file path.
The reason is that some of the previous tests that use no-cone mode in
t7002 are keep breaking, mainly because the `dst_mode = SPARSE;` line
added in this patch.
Most features developed in both "from-out-to-in" and "from-in-to-out"
only care about cone mode situation, as no-cone mode is becoming
irrelevant. And because assigning `SPARSE` to `dst_mode` when the
repo is in no-cone mode causes miscellaneous bugs, we should just leave
this new functionality to be exclusive cone mode and save some time.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Helped-by: Victoria Dye <vdye@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since BOTH is not used anywhere in the code and its meaning is unclear,
remove it.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Helped-by: Victoria Dye <vdye@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, <destination> is assumed to be in the working tree. If it is
not found as a directory, then it is determined to be either a regular file
path, or error out if used under the second form (move into a directory)
of 'git-mv'. Such behavior is not ideal, mainly because Git does not
look into the index for <destination>, which could potentially be a
SKIP_WORKTREE_DIR, which we need to determine for the later "moving from
in-cone to out-of-cone" patch.
Change the logic so that Git first check if <destination> is a directory
with all its contents sparsified (a SKIP_WORKTREE_DIR).
If <destination> is such a sparse directory, then we should modify the
index the same way as we would if this were a non-sparse directory. We
must be careful to ensure that the <destination> is marked with
SKIP_WORKTREE_DIR.
Also add a `dst_w_slash` to reuse the result from `add_slash()`, which
was everywhere and can be simplified.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Helped-by: Victoria Dye <vdye@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
with_slash may be a malloc'd pointer, and when it is, free it.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Helped-by: Victoria Dye <vdye@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Method check_dir_in_index() introduced in b91a2b6594 (mv: add
check_dir_in_index() and solve general dir check issue, 2022-06-30)
does not describe its intent and behavior well.
Change its name to empty_dir_has_sparse_contents(), which more
precisely describes its purpose.
Reverse the return values, check_dir_in_index() return 0 for success
and 1 for failure; reverse the values so empty_dir_has_sparse_contents()
return 1 for success and 0 for failure. These values are more intuitive
because 1 usually means "has" and 0 means "not found".
Also modify the documentation to better align with the method's
intent and behavior.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Helped-by: Victoria Dye <vdye@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply Coccinelle rule to turn raw memmove() into MOVE_ARRAY() cpp
macro, which would improve maintainability and readability.
* jc/builtin-mv-move-array:
builtin/mv.c: use the MOVE_ARRAY() macro instead of memmove()
The variables 'source', 'destination', and 'submodule_gitfile' are
all of type "const char **", and an element of such an array is of
"type const char *", but these memmove() calls were written as if
these variables are of type "char **".
Once these memmove() calls are fixed to use the correct type to
compute the number of bytes to be moved, e.g.
- memmove(source + i, source + i + 1, n * sizeof(char *));
+ memmove(source + i, source + i + 1, n * sizeof(const char *));
existing contrib/coccinelle/array.cocci rules can recognize them as
candidates for turning into MOVE_ARRAY().
While at it, use CALLOC_ARRAY() instead of xcalloc() to allocate the
modes[] array that is involved in the change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, moving a <source> directory which is not on-disk due
to its existence outside of sparse-checkout cone, "giv mv" command
errors out with "bad source".
Add a helper check_dir_in_index() function to see if a directory
name exists in the index. Also add a SKIP_WORKTREE_DIR bit to mark
such directories.
Change the checking logic, so that such <source> directory makes
"giv mv" command warns with "advise_on_updating_sparse_paths()"
instead of "bad source"; also user now can supply a "--sparse" flag so
this operation can be carried out successfully.
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As suggested by Derrick [1], move the in-line definition of
"enum update_mode" to the top of the file and make it use "flags"
mode (each state is a different bit in the word).
Change the flag assignments from '=' (single assignment) to '|='
(additive). Also change flag evaluation from '==' to '&', etc.
[1] https://lore.kernel.org/git/22aadea2-9330-aa9e-7b6a-834585189144@github.com/
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, moving a sparse file into cone can result in unwarned
overwrite of existing entry. The expected behavior is that if the
<destination> exists in the entry, user should be prompted to supply
a [-f|--force] to carry out the operation, or the operation should
fail.
Add a check mechanism to do that.
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, moving a <source> file which is not on-disk but exists in
index as a SKIP_WORKTREE enabled cache entry, "giv mv" command errors
out with "bad source".
Change the checking logic, so that such <source>
file makes "giv mv" command warns with "advise_on_updating_sparse_paths()"
instead of "bad source"; also user now can supply a "--sparse" flag so
this operation can be carried out successfully.
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previous if/else-if chain are highly nested and hard to develop/extend.
Refactor to decouple this if/else-if chain by using goto to jump ahead.
Suggested-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, "git mv" a sparse file from out-of-cone to
in-cone does not update the moved file's sparsity (remove its
SKIP_WORKTREE bit). And the corresponding cache entry is, unexpectedly,
not checked out in the working tree.
Update the behavior so that:
1. Moving from out-of-cone to in-cone removes the SKIP_WORKTREE bit from
corresponding cache entry.
2. The moved cache entry is checked out in the working tree to reflect
the updated sparsity.
Helped-by: Victoria Dye <vdye@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since cmd_mv() does not operate on cache entries and instead directly
checks the filesystem, we can only use path_in_sparse_checkout() as a
mechanism for seeing if a path is sparse or not. Be sure to skip
returning a failure if '-k' is specified.
To ensure that the advice around sparse paths is the only reason a move
failed, be sure to check this as the very last thing before inserting
into the src_for_dst list.
The tests cover a variety of cases such as whether the target is tracked
or untracked, and whether the source or destination are in or outside of
the sparse-checkout definition.
Helped-by: Matheus Tavares Bernardino <matheus.bernardino@usp.br>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These leaks all happen at the end of cmd_mv, hence don't matter in any
way. But we still fix the easy ones and squash the rest to get us closer
to being able to run tests without leaks.
LSAN output from t0050:
Direct leak of 384 byte(s) in 1 object(s) allocated from:
#0 0x49ab49 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0xa8c015 in xrealloc wrapper.c:126:8
#2 0xa0a7e1 in add_entry string-list.c:44:2
#3 0xa0a7e1 in string_list_insert string-list.c:58:14
#4 0x5dac03 in cmd_mv builtin/mv.c:248:4
#5 0x4ce83e in run_builtin git.c:475:11
#6 0x4ccafe in handle_builtin git.c:729:3
#7 0x4cb01c in run_argv git.c:818:4
#8 0x4cb01c in cmd_main git.c:949:19
#9 0x6bd9ad in main common-main.c:52:11
#10 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x49a82d in malloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0xa8bd09 in do_xmalloc wrapper.c:41:8
#2 0x5dbc34 in internal_prefix_pathspec builtin/mv.c:32:2
#3 0x5da575 in cmd_mv builtin/mv.c:158:14
#4 0x4ce83e in run_builtin git.c:475:11
#5 0x4ccafe in handle_builtin git.c:729:3
#6 0x4cb01c in run_argv git.c:818:4
#7 0x4cb01c in cmd_main git.c:949:19
#8 0x6bd9ad in main common-main.c:52:11
#9 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x49a82d in malloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0xa8bd09 in do_xmalloc wrapper.c:41:8
#2 0x5dbc34 in internal_prefix_pathspec builtin/mv.c:32:2
#3 0x5da4e4 in cmd_mv builtin/mv.c:148:11
#4 0x4ce83e in run_builtin git.c:475:11
#5 0x4ccafe in handle_builtin git.c:729:3
#6 0x4cb01c in run_argv git.c:818:4
#7 0x4cb01c in cmd_main git.c:949:19
#8 0x6bd9ad in main common-main.c:52:11
#9 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 8 byte(s) in 1 object(s) allocated from:
#0 0x49a9a2 in calloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
#1 0xa8c119 in xcalloc wrapper.c:140:8
#2 0x5da585 in cmd_mv builtin/mv.c:159:22
#3 0x4ce83e in run_builtin git.c:475:11
#4 0x4ccafe in handle_builtin git.c:729:3
#5 0x4cb01c in run_argv git.c:818:4
#6 0x4cb01c in cmd_main git.c:949:19
#7 0x6bd9ad in main common-main.c:52:11
#8 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 4 byte(s) in 1 object(s) allocated from:
#0 0x49a9a2 in calloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
#1 0xa8c119 in xcalloc wrapper.c:140:8
#2 0x5da4f8 in cmd_mv builtin/mv.c:149:10
#3 0x4ce83e in run_builtin git.c:475:11
#4 0x4ccafe in handle_builtin git.c:729:3
#5 0x4cb01c in run_argv git.c:818:4
#6 0x4cb01c in cmd_main git.c:949:19
#7 0x6bd9ad in main common-main.c:52:11
#8 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 65 byte(s) in 1 object(s) allocated from:
#0 0x49ab49 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0xa8c015 in xrealloc wrapper.c:126:8
#2 0xa00226 in strbuf_grow strbuf.c:98:2
#3 0xa00226 in strbuf_vaddf strbuf.c:394:3
#4 0xa065c7 in xstrvfmt strbuf.c:981:2
#5 0xa065c7 in xstrfmt strbuf.c:991:8
#6 0x9e7ce7 in prefix_path_gently setup.c:115:15
#7 0x9e7fa6 in prefix_path setup.c:128:12
#8 0x5dbdbf in internal_prefix_pathspec builtin/mv.c:55:23
#9 0x5da575 in cmd_mv builtin/mv.c:158:14
#10 0x4ce83e in run_builtin git.c:475:11
#11 0x4ccafe in handle_builtin git.c:729:3
#12 0x4cb01c in run_argv git.c:818:4
#13 0x4cb01c in cmd_main git.c:949:19
#14 0x6bd9ad in main common-main.c:52:11
#15 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 65 byte(s) in 1 object(s) allocated from:
#0 0x49ab49 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0xa8c015 in xrealloc wrapper.c:126:8
#2 0xa00226 in strbuf_grow strbuf.c:98:2
#3 0xa00226 in strbuf_vaddf strbuf.c:394:3
#4 0xa065c7 in xstrvfmt strbuf.c:981:2
#5 0xa065c7 in xstrfmt strbuf.c:991:8
#6 0x9e7ce7 in prefix_path_gently setup.c:115:15
#7 0x9e7fa6 in prefix_path setup.c:128:12
#8 0x5dbdbf in internal_prefix_pathspec builtin/mv.c:55:23
#9 0x5da4e4 in cmd_mv builtin/mv.c:148:11
#10 0x4ce83e in run_builtin git.c:475:11
#11 0x4ccafe in handle_builtin git.c:729:3
#12 0x4cb01c in run_argv git.c:818:4
#13 0x4cb01c in cmd_main git.c:949:19
#14 0x6bd9ad in main common-main.c:52:11
#15 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 558 byte(s) leaked in 7 allocation(s).
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following sequence, on a case-insensitive file system,
(strictly speeking with core.ignorecase=true)
leads to an assertion failure and leaves .git/index.lock behind.
git init
echo foo >foo
git add foo
git mv foo FOO
git mv foo bar
This regression was introduced in Commit 9b906af657,
"git-mv: improve error message for conflicted file"
The bugfix is to change the "file exist case-insensitive in the index"
into the correct "file exist (case-sensitive) in the index".
This avoids the "assert" later in the code and keeps setting up the
"ce" pointer for ce_stage(ce) done in the next else if.
This fixes
https://github.com/git-for-windows/git/issues/2920
Reported-By: Dan Moseley <Dan.Moseley@microsoft.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git mv' has always complained about renaming a conflicted
file, as it cannot handle multiple index entries for one file.
However, the error message it uses has been the same as the
one for an untracked file:
fatal: not under version control, src=...
which is patently wrong. Distinguish the two cases and
add a test to make sure we produce the correct message.
Signed-off-by: Chris Torek <chris.torek@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up to adjust to a more recent lockfile API convention that
allows lockfile instances kept on the stack.
* ma/lockfile-cleanup:
lock_file: move static locks into functions
lock_file: make function-local locks non-static
refs.c: do not die if locking fails in `delete_pseudoref()`
refs.c: do not die if locking fails in `write_pseudoref()`
t/helper/test-write-cache: clean up lock-handling
Placing `struct lock_file`s on the stack used to be a bad idea, because
the temp- and lockfile-machinery would keep a pointer into the struct.
But after 076aa2cbd (tempfile: auto-allocate tempfiles on heap,
2017-09-05), we can safely have lockfiles on the stack. (This applies
even if a user returns early, leaving a locked lock behind.)
Each of these `struct lock_file`s is used from within a single function.
Move them into the respective functions to make the scope clearer and
drop the staticness.
For good measure, I have inspected these sites and come to believe that
they always release the lock, with the possible exception of bailing out
using `die()` or `exit()` or by returning from a `cmd_foo()`.
As pointed out by Jeff King, it would be bad if someone held on to a
`struct lock_file *` for some reason. After some grepping, I agree with
his findings: no-one appears to be doing that.
After this commit, the remaining occurrences of "static struct
lock_file" are locks that are used from within different functions. That
is, they need to remain static. (Short of more intrusive changes like
passing around pointers to non-static locks.)
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Moving a submodule that itself has submodule in it with "git mv"
forgot to make necessary adjustment to the nested sub-submodules;
now the codepath learned to recurse into the submodules.
* sb/submodule-move-nested:
submodule: fixup nested submodules after moving the submodule
submodule-config: remove submodule_from_cache
submodule-config: add repository argument to submodule_from_{name, path}
submodule-config: allow submodule_free to handle arbitrary repositories
grep: remove "repo" arg from non-supporting funcs
submodule.h: drop declaration of connect_work_tree_and_git_dir
connect_work_tree_and_git_dir is used to connect a submodule worktree with
its git directory and vice versa after events that require a reconnection
such as moving around the working tree. As submodules can have nested
submodules themselves, we'd also want to fix the nested submodules when
asked to. Add an option to recurse into the nested submodules and connect
them as well.
As submodules are identified by their name (which determines their git
directory in relation to their superproject's git directory) internally
and by their path in the working tree of the superproject, we need to
make sure that the mapping of name <-> path is kept intact. We can do
that in the git-mv command by writing out the gitmodules file first
and then forcing a reload of the submodule config machinery.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Internal API clean-up to allow write_locked_index() optionally skip
writing the in-core index when it is not modified.
* ma/skip-writing-unchanged-index:
write_locked_index(): add flag to avoid writing unchanged index
Teach parse-options API an option to help the completion script,
and make use of the mechanism in command line completion.
* nd/parseopt-completion: (45 commits)
completion: more subcommands in _git_notes()
completion: complete --{reuse,reedit}-message= for all notes subcmds
completion: simplify _git_notes
completion: don't set PARSE_OPT_NOCOMPLETE on --rerere-autoupdate
completion: use __gitcomp_builtin in _git_worktree
completion: use __gitcomp_builtin in _git_tag
completion: use __gitcomp_builtin in _git_status
completion: use __gitcomp_builtin in _git_show_branch
completion: use __gitcomp_builtin in _git_rm
completion: use __gitcomp_builtin in _git_revert
completion: use __gitcomp_builtin in _git_reset
completion: use __gitcomp_builtin in _git_replace
remote: force completing --mirror= instead of --mirror
completion: use __gitcomp_builtin in _git_remote
completion: use __gitcomp_builtin in _git_push
completion: use __gitcomp_builtin in _git_pull
completion: use __gitcomp_builtin in _git_notes
completion: use __gitcomp_builtin in _git_name_rev
completion: use __gitcomp_builtin in _git_mv
completion: use __gitcomp_builtin in _git_merge_base
...
We have several callers like
if (active_cache_changed && write_locked_index(...))
handle_error();
rollback_lock_file(...);
where the final rollback is needed because "!active_cache_changed"
shortcuts the if-expression. There are also a few variants of this,
including some if-else constructs that make it more clear when the
explicit rollback is really needed.
Teach `write_locked_index()` to take a new flag SKIP_IF_UNCHANGED and
simplify the callers. Leave the most complicated of the callers (in
builtin/update-index.c) unchanged. Rewriting it to use this new flag
would end up duplicating logic.
We could have made the new flag behave the other way round
("FORCE_WRITE"), but that could break existing users behind their backs.
Let's take the more conservative approach. We can still migrate existing
callers to use our new flag. Later we might even be able to flip the
default, possibly without entirely ignoring the risk to in-flight or
out-of-tree topics.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--force option is most likely hidden from command line completion for
safety reasons. This is done by adding an extra flag
PARSE_OPT_NOCOMPLETE. Update OPT__FORCE() to accept additional
flags. Actual flag change comes later depending on individual
commands.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a127331cd (mv: allow moving nested submodules,
2016-04-19), introduced
if (show_only) continue;
in this for-loop before
if (!show_only)
which became redundant, because it is now always true.
Signed-off-by: Stefan Moch <stefanmoch@mail.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the submodule-config subsystem can lazily read the gitmodules
file we no longer need to explicitly pre-read the gitmodules by calling
'gitmodules_config()' so let's remove it.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach 'is_staging_gitmodules_ok()' to be able to determine in the
'.gitmodules' file has unstaged changes based on the passed in index
instead of relying on a global variable which is set during the
submodule-config parsing.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up in the pathspec API.
* bw/pathspec-cleanup:
pathspec: rename prefix_pathspec to init_pathspec_item
pathspec: small readability changes
pathspec: create strip submodule slash helpers
pathspec: create parse_element_magic helper
pathspec: create parse_long_magic function
pathspec: create parse_short_magic function
pathspec: factor global magic into its own function
pathspec: simpler logic to prefix original pathspec elements
pathspec: always show mnemonic and name in unsupported_magic
pathspec: remove unused variable from unsupported_magic
pathspec: copy and free owned memory
pathspec: remove the deprecated get_pathspec function
ls-tree: convert show_recursive to use the pathspec struct interface
dir: convert fill_directory to use the pathspec struct interface
dir: remove struct path_simplify
mv: remove use of deprecated 'get_pathspec()'
Convert the 'internal_copy_pathspec()' function to 'prefix_path()'
instead of using the deprecated 'get_pathspec()' interface. Also,
rename 'internal_copy_pathspec()' to 'internal_prefix_pathspec()' to be
more descriptive of what the funciton is actually doing.
In addition to this, fix a memory leak caused by only duplicating some
of the pathspec elements. Instead always duplicate all of the the
pathspec elements as an intermediate step (with modificationed based on
the passed in flags). This way the intermediate strings can then be
freed after getting the result from 'prefix_path()'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers of the hold_locked_index() function pass 0 when they want to
prepare to write a new version of the index file without wishing to
die or emit an error message when the request fails (e.g. somebody
else already held the lock), and pass 1 when they want the call to
die upon failure.
This option is called LOCK_DIE_ON_ERROR by the underlying lockfile
API, and the hold_locked_index() function translates the paramter to
LOCK_DIE_ON_ERROR when calling the hold_lock_file_for_update().
Replace these hardcoded '1' with LOCK_DIE_ON_ERROR and stop
translating. Callers other than the ones that are replaced with
this change pass '0' to the function; no behaviour change is
intended with this patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
Among the callers of hold_locked_index() that passes 0:
- diff.c::refresh_index_quietly() at the end of "git diff" is an
opportunistic update; it leaks the lockfile structure but it is
just before the program exits and nobody should care.
- builtin/describe.c::cmd_describe(),
builtin/commit.c::cmd_status(),
sequencer.c::read_and_refresh_cache() are all opportunistic
updates and they are OK.
- builtin/update-index.c::cmd_update_index() takes a lock upfront
but we may end up not needing to update the index (i.e. the
entries may be fully up-to-date), in which case we do not need to
issue an error upon failure to acquire the lock. We do diagnose
and die if we indeed need to update, so it is OK.
- wt-status.c::require_clean_work_tree() IS BUGGY. It asks
silence, does not check the returned value. Compare with
callsites like cmd_describe() and cmd_status() to notice that it
is wrong to call update_index_if_able() unconditionally.
Add a semantic patch for converting certain calls of memcpy(3) to
COPY_ARRAY() and apply that transformation to the code base. The result
is
shorter and safer code. For now only consider calls where source and
destination have the same type, or in other words: easy cases.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling `rename("dir", "non-existing-dir/")` on Linux, it silently
succeeds, stripping the trailing slash of the second argument.
This is all good and dandy but this behavior disagrees with the specs at
http://pubs.opengroup.org/onlinepubs/9699919799/functions/rename.html
that state clearly regarding the 2nd parameter (called `new`):
If the `new` argument does not resolve to an existing directory
entry for a file of type directory and the `new` argument
contains at least one non- <slash> character and ends with one
or more trailing <slash> characters after all symbolic links
have been processed, `rename()` shall fail.
Of course, we would like `git mv dir non-existing-dir/` to succeed (and
rename the directory "dir" to "non-existing-dir"). Let's be extra
careful to remove the trailing slash in that case.
This lets t7001-mv.sh pass in Bash on Windows.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git mv old new" did not adjust the path for a submodule that lives
as a subdirectory inside old/ directory correctly.
* sb/mv-submodule-fix:
mv: allow moving nested submodules
When directories are moved using `git mv` all files in the directory
have been just moved, but no further action was taken on them. This
was done by assigning the mode = WORKING_DIRECTORY to the files
inside a moved directory.
submodules however need to update their link to the git directory as
well as updates to the .gitmodules file. By removing the condition of
`mode != INDEX` (the remaining modes are BOTH and WORKING_DIRECTORY) for
the required submodule actions, we perform these for submodules in a
moved directory.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
