Many tests pass $(pwd) in some form to git and later test that the output
of git contains the correct value of $(pwd). For example, the test of
'git remote show' sets up a remote that contains $(pwd) and then the
expected result must contain $(pwd).
Again, MSYS-bash's path mangling kicks in: Plain $(pwd) uses the MSYS style
absolute path /c/path/to/git. The test case would write this name into
the 'expect' file. But when git is invoked, MSYS-bash converts this name to
the Windows style path c:/path/to/git, and git would produce this form in
the result; the test would fail.
We fix this by passing -W to bash's pwd that produces the Windows-style
path.
There are a two cases that need an accompanying change:
- In t1504 the value of $(pwd) becomes part of a path list. In this case,
the lone 'c' in something like /foo:c:/path/to/git:/bar inhibits
MSYS-bashes path mangling; IOW in this case we want the /c/path/to/git
form to allow path mangling. We use $PWD instead of $(pwd), which always
has the latter form.
- In t6200, $(pwd) - the Windows style path - must be used to construct the
expected result because that is the path form that git sees. (The change
in the test itself is just for consistency: 'git fetch' always sees the
Windows-style path, with or without the change.)
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
t1002-read-tree-m-u-2way.sh uses 'sum', but it does not rely on the exact
form of the sum, only that it is a hash digest. Therefore, we can sneak
in 'md5sum' under the name 'sum'.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
If the PATH lists the Windows system directories before the MSYS
directories, Windows's own incompatible sort and find commands would be
picked up. We implement these commands as functions and call the real
tools by absolute path.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
MSYS's bash rewrites /something/bin/... into a Windows path that looks like
c:/msysgit/something/bin/... before git sees it. But later the test case
verifies that the path was used and compares it to the unmangled version.
This fails, of course. This make the path relative so that the path
mangling is not triggered.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
We do not have /dev/zero on Windows. This replaces it by data generated
with printf, perl, or echo. Most of the cases do not depend on that the
data is a stream of zero bytes, so we use something printable; nor is an
unlimited stream of data needed, so we produce only as many bytes as the
test cases need.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
On Windows, there is an unfortunate interaction between the MSYS bash and
git's command line processing:
- Since Windows's CMD does not do the wildcard expansion, but passes
arguments like path* through to the programs, the programs must do the
expansion themselves. This happens in the startup code before main() is
entered.
- bash, however, passes the argument "path*" to git, assuming that git will
see the unquoted word unchanged as a single argument.
But actually git expands the unquoted word before main() is entered.
In t2200, not all names that the test case is interested in exist as files
at the time when 'git ls-files' is invoked. git expands "path?" to only
the subset of files the exist, and only that subset was listed, so that the
test failed. We now list all interesting paths explicitly.
In t7004, git exanded the pattern "*a*" to "actual" (the file that stdout
was redirected to), which is not what the was tested for. We fix it by
renaming the output file (and removing any existing files matching *a*).
This was originally fixed by Johannes Schindelin.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
On Windows, you cannot remove files that are in use, not even with
'rm -rf'. So we need to run 'exec <foo/bar' inside a subshell lest
removing the whole test repository fail.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
This function replaces sequences of 'chmod +x' and 'git update-index
--chmod=+x' in the test suite, whose purpose is to help filesystems
that need core.filemode=false. Two places where only 'chmod +x' was used
we also use this new function.
The function calls 'git update-index --chmod' without checking
core.filemode (unlike some of the call sites did). We do this because the
call sites *expect* that the executable bit ends up in the index (ie. it
is not the purpose of the call sites to *test* whether git treats
'chmod +x' and 'update-index --chmod=+x' correctly). Therefore, on
filesystems with core.filemode=true the 'git update-index --chmod' is a
no-op.
The function uses --add with update-index to help one call site in
t6031-merge-recursive. It makes no difference for the other callers.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Since the test case counter was incremented very late, there were a few
users of the counter had to do their own incrementing. Now we increment it
early and simplify these users.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
In particular:
- Test case counting can be achieved by arithmetic expansion.
- The name of the test, e.g. t1234, can be computed with ${0%%} and ${0##}.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
There were some uses of 'say' inside test_expect_success. But if the tests
were not run in verbose mode, this message went to /dev/null. Pull them out
of test_expect_success.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Some tests report that some tests will be skipped. They used
'test_expect_success' with a trivially successful test. Nowadays we have
the helper function 'say' for this purpose.
In on case, 'say_color skip' is replaced by 'say' because the former is
not intended as a public API.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
The tests do not depend on that the clones are hard-linked, but used
--local only as an optimization: At the time that --local was used first
in t9400 hard-linked clones were not the default, yet.
By removing --local, we help filesystems that do not support hard-links.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
* js/remote-improvements: (23 commits)
builtin-remote.c: no "commented out" code, please
builtin-remote: new show output style for push refspecs
builtin-remote: new show output style
remote: make guess_remote_head() use exact HEAD lookup if it is available
builtin-remote: add set-head subcommand
builtin-remote: teach show to display remote HEAD
builtin-remote: fix two inconsistencies in the output of "show <remote>"
builtin-remote: make get_remote_ref_states() always populate states.tracked
builtin-remote: rename variables and eliminate redundant function call
builtin-remote: remove unused code in get_ref_states
builtin-remote: refactor duplicated cleanup code
string-list: new for_each_string_list() function
remote: make match_refs() not short-circuit
remote: make match_refs() copy src ref before assigning to peer_ref
remote: let guess_remote_head() optionally return all matches
remote: make copy_ref() perform a deep copy
remote: simplify guess_remote_head()
move locate_head() to remote.c
move duplicated ref_newer() to remote.c
move duplicated get_local_heads() to remote.c
...
Conflicts:
builtin-clone.c
Several old tests were written before test_cmp was introduced, convert
these to test_cmp.
If were are at it, fix the order of the arguments where necessary to
make expected come first, so the command shows how the test result
deviates from the correct output.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is broken because of the tricks we have to play with
lstat to get the bearable perfomance out of the call.
Sadly, it disables access to Cygwin's executable attribute,
which Windows filesystems do not have at all.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The earlier code meant to attempt to strip everything except the test
number, but only stripped the part starting with the last dash.
However, there is no reason why we should not use the whole basename.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to selectively skip tests, the environment variable GIT_SKIP_TESTS
can be set like this:
$ GIT_SKIP_TESTS='t1301 t4150.18' make test
That is, its value can contain only the test script numbers, but not the
full script name. Therefore, it is important that the test scripts are
uniquely numbered. This makes it so.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git read-tree A B C..." without the "-m" (merge) option is a way to read
these trees on top of each other to get an overlay of them.
An ancient commit ee6566e (Rewrite read-tree, 2005-09-05) passed the
ADD_CACHE_SKIP_DFCHECK flag when calling add_index_entry() to add the
paths obtained from these trees to the index, but it is an incorrect use
of the flag. The flag is meant to be used by callers who know the
addition of the entry does not introduce a D/F conflict to the index in
order to avoid the overhead of checking.
This bug resulted in a bogus index that records both "x" and "x/z" as a
blob after reading three trees that have paths ("x"), ("x", "y"), and
("x/z", "y") respectively. 34110cd (Make 'unpack_trees()' have a separate
source and destination index, 2008-03-06) refactored the callsites of
add_index_entry() incorrectly and added more codepaths that use this flag
when it shouldn't be used.
Also, 0190457 (Move 'unpack_trees()' over to 'traverse_trees()' interface,
2008-03-05) introduced a bug to call add_index_entry() for the tree that
does not have the path in it, passing NULL as a cache entry. This caused
reading multiple trees, one of which has path "x" but another doesn't, to
segfault.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
3e0c4ff (send-email: respect in-reply-to regardless of threading,
2009-03-01) fixed the handling of the In-Reply-To header when both
--no-thread and --in-reply-to are in effect. Add a test for it.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/maint-submodule-normalize-path:
git submodule: Fix adding of submodules at paths with ./, .. and //
git submodule: Add test cases for git submodule add
* tr/format-patch-thread:
format-patch: support deep threading
format-patch: thread as reply to cover letter even with in-reply-to
format-patch: track several references
format-patch: threading test reactivation
Conflicts:
builtin-log.c
* tr/gcov:
Test git-patch-id
Test rev-list --parents/--children
Test log --decorate
Test fsck a bit harder
Test log --graph
Test diff --dirstat functionality
Test that diff can read from stdin
Support coverage testing with GCC/gcov
LoadModule directive for log_config_module will not work if the module is
built-in.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, the rsync tests were disabled by default, as they needed a
running rsyncd daemon. This was only due to the limitation that our
rsync transport only allowed full URLs of the form
rsync://<host>/<path>
Relaxing the URLs to allow
rsync:<path>
permitted the change in the tests to run whenever rsync is available,
without requiring a fully configured and running rsyncd.
While at it, the tests were fixed so that they run in directories with a
space in their name.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The log_config module is needed for at least some versions of apache to
support the LogFormat directive.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
builtin-revert.c: release index lock when cherry-picking an empty commit
document config --bool-or-int
t1300: use test_must_fail as appropriate
cleanup: add isascii()
Documentation: fix badly indented paragraphs in "--bisect-all" description
When launching "diff --no-index" with a parameter "/dev/null", the MSys
bash converts the "/dev/null" to a "nul", which usually makes sense. But
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Define GIT_TEST_CLONE_2GB=t if you want the test not to be skipped.
The test works by constructing a repository larger than 2gb, and then
cloning it.
The repository is forced larger than 2gb by setting compression and
delta depth to zero, and then adding just enough unique objects of
a given size.
The objects consist of a running decimal number in ASCII, padded by
spaces. Should that break in the future, e.g. when pack v4 becomes
default, there is a commented-out call to test-genrandom which can be
substituted, but that uses more cycles than the current method.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a cherry-pick of an empty commit is done, release the lock
held on the index.
The fix is the same as was applied to similar code in 4271666046.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the tests checked the exit code manually, even going
so far as to run git outside of the test_expect harness.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ns/pretty-format:
bash completion: add --format= and --oneline options for "git log"
Add tests for git log --pretty, --format and --oneline.
Add --oneline that is a synonym to "--pretty=oneline --abbrev-commit"
Give short-hands to --pretty=tformat:%formatstring
Add --format that is a synonym to --pretty
* js/send-email:
send-email: add --confirm option and configuration setting
send-email: don't create temporary compose file until it is needed
send-email: --suppress-cc improvements
send-email: handle multiple Cc addresses when reading mbox message
send-email: allow send-email to run outside a repo
* js/branch-symref:
add basic branch display tests
branch: clean up repeated strlen
Avoid segfault with 'git branch' when the HEAD is detached
builtin-branch: improve output when displaying remote branches
Conflicts:
builtin-branch.c
* js/valgrind:
valgrind: do not require valgrind 3.4.0 or newer
test-lib: avoid assuming that templates/ are in the GIT_EXEC_PATH
Tests: let --valgrind imply --verbose and --tee
Add a script to coalesce the valgrind outputs
t/Makefile: provide a 'valgrind' target
test-lib.sh: optionally output to test-results/$TEST.out, too
Valgrind support: check for more than just programming errors
valgrind: ignore ldso and more libz errors
Add valgrind support in test scripts
When archiving a repository there is no way to specify a file as output.
This patch adds a new option "--output" that redirects the output to a
file instead of stdout.
Signed-off-by: Carlos Manuel Duclos Vergara <carlos.duclos@nokia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make 'git submodule add' normalize the submodule path in the
same way as 'git ls-files' does, so that 'git submodule init' looks up
the information in .gitmodules with the same key under which 'git
submodule add' stores it.
This fixes 4 known breakages.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add simple test cases for adding and initialising submodules. The
init step is necessary in order to verify the added information.
The second test exposes a known breakage due to './' in the path: git
ls-files simplifies the path but git add does not, which leads to git
init looking for different lines in .gitmodules than git add adds.
The other tests add test cases for '//' and '..' in the path which
currently fail for the same reason.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mental model for clone is that the branch is "checked
out" (and it even says this in Documentation/git-clone.txt:
"...creates and checks out an initial branch"). Therefore it
is reasonable for users to expect that any post-checkout
hook would be run.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email violates the principle of least surprise by automatically
cc'ing additional recipients without confirming this with the user.
This patch teaches send-email a --confirm option. It takes the
following values:
--confirm=always always confirm before sending
--confirm=never never confirm before sending
--confirm=cc confirm before sending when send-email has
automatically added addresses from the patch to
the Cc list
--confirm=compose confirm before sending the first message when
using --compose. (Needed to maintain backwards
compatibility with existing behavior.)
--confirm=auto 'cc' + 'compose'
If sendemail.confirm is unconfigured, the option defaults to 'compose'
if any suppress-Cc related options have been used, otherwise it defaults
to 'auto'.
Unfortunately, it is impossible to introduce this patch such that it
helps new users without potentially annoying some existing users. We
attempt to mitigate the latter by:
* Allowing the user to set 'git config sendemail.confirm never'
* Allowing the user to say 'all' after the first prompt to not be
prompted on remaining emails during the same invocation.
* Telling the user about the 'sendemail.confirm' setting if it is
unconfigured whenever we prompt due to Cc before sending.
* Only prompting if no --suppress related options have been passed, as
using such an option is likely to indicate an experienced send-email
user.
There is a slight fib in message informing the user of the
sendemail.confirm setting and this is intentional. Setting 'auto'
differs from leaving sendemail.confirm unset in two ways: 1) 'auto'
obviously squelches the informational message; 2) 'auto' prompts when
the Cc list has been expanded even in the presence of a --suppress
related option, where leaving sendemail.confirm unset does not. This is
intentional to keep the message simple, and to avoid adding another
sendemail.confirm value ('auto-except-suppress'?).
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The behavior of --verbose is unchanged, but uses a different state
variable internally, so that the meaning of verbose output may be
expanded without affecting the diffstat. This is also reflected in
the documentation.
The configuration option rebase.stat works the same was as merg.stat,
but the default is currently false.
Signed-off-by: Tor Arne Vestbø <torarnv@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Short story: There is a section in t3400 that tests fundamental rebase
properties. 3ec7371f (Add two extra tests for git rebase, 2009-02-09)
added a check that rebase works on a detached HEAD, but the test was put
near the end of the file. This moves it to a more suitable place.
Long story: The test that preceded the one in question tests that a
rebased commit degrades from a content change with mode change to a
mere mode change. But on Windows, where we have core.filemode=false,
the original commit did not record the mode change, and so the rebase
operation did not rebase anything. This caused the subsequent detached
HEAD test to fail.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
