Add an alias for --subject-prefix='RFC PATCH', which is used
commonly in some development communities to deserve such a
short-hand.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation set has been updated so that literal commands,
configuration variables and environment variables are consistently
typeset in fixed-width font and bold in manpages.
* tr/doc-tt:
doc: change configuration variables format
doc: more consistency in environment variables format
doc: change environment variables format
doc: clearer rule about formatting literals
This change configuration variables that where in italic style
to monospace font according to the guideline. It was obtained with
grep '[[:alpha:]]*\.[[:alpha:]]*::$' config.txt | \
sed -e 's/::$//' -e 's/\./\\\\./' | \
xargs -iP perl -pi -e "s/\'P\'/\`P\`/g" ./*.txt
Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org>
Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org>
Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce --base=auto to record the base commit info automatically, the
base_commit will be the merge base of tip commit of the upstream branch
and revision-range specified in cmdline.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Maintainers or third party testers may want to know the exact base tree
the patch series applies to. Teach git format-patch a '--base' option
to record the base tree info and append it at the end of the first
message (either the cover letter or the first patch in the series).
The base tree info consists of the "base commit", which is a well-known
commit that is part of the stable part of the project history everybody
else works off of, and zero or more "prerequisite patches", which are
well-known patches in flight that is not yet part of the "base commit"
that need to be applied on top of "base commit" in topological order
before the patches can be applied.
The "base commit" is shown as "base-commit: " followed by the 40-hex of
the commit object name. A "prerequisite patch" is shown as
"prerequisite-patch-id: " followed by the 40-hex "patch id", which can
be obtained by passing the patch through the "git patch-id --stable"
command.
Imagine that on top of the public commit P, you applied well-known
patches X, Y and Z from somebody else, and then built your three-patch
series A, B, C, the history would be like:
---P---X---Y---Z---A---B---C
With "git format-patch --base=P -3 C" (or variants thereof, e.g. with
"--cover-letter" of using "Z..C" instead of "-3 C" to specify the
range), the base tree information block is shown at the end of the
first message the command outputs (either the first patch, or the
cover letter), like this:
base-commit: P
prerequisite-patch-id: X
prerequisite-patch-id: Y
prerequisite-patch-id: Z
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" learned to notice format.outputDirectory
configuration variable. This allows "-o <dir>" option to be
omitted on the command line if you always use the same directory in
your workflow.
* ak/format-patch-odir-config:
format-patch: introduce format.outputDirectory configuration
The documentation has been updated to hint the connection between
the '--signoff' option and DCO.
* dw/signoff-doc:
Expand documentation describing --signoff
We can pass -o/--output-directory to the format-patch command to store
patches in some place other than the working directory. This patch
introduces format.outputDirectory configuration option for same
purpose.
The case of usage of this configuration option can be convenience
to not pass every time -o/--output-directory if an user has pattern
to store all patches in the /patches directory for example.
The format.outputDirectory has lower priority than command line
option, so if user will set format.outputDirectory and pass the
command line option, a result will be stored in a directory that
passed to command line option.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modify various document (man page) files to explain
in more detail what --signoff means.
This was inspired by https://lwn.net/Articles/669976/ where
paulj noted, "adding [the] '-s' argument to [a] git commit
doesn't really mean you have even heard of the DCO...".
Extending git's documentation will make it easier to argue
that developers understood --signoff when they use it.
Signed-off-by: David A. Wheeler <dwheeler@dwheeler.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Oftentimes, patches created by git format-patch will be stored in
version control or compared with diff. In these cases, two otherwise
identical patches can have different commit hashes, leading to diff
noise. Teach git format-patch a --zero-commit option that instead
produces an all-zero hash to avoid this diff noise.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The branch descriptions that are set with "git branch --edit-description"
option were used in many places but they weren't clearly documented.
* po/doc-branch-desc:
doc: show usage of branch description
The branch description will be included in 'git format-patch
--cover-letter' and in 'git pull-request' emails. It can also
be used in the automatic merge message. Tell the reader.
While here, clarify that the description may be a multi-line
explanation of the purpose of the branch's patch series.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
reroll count documentation states that v<n> will be pretended to the
filename. Judging by the examples that should have been 'prepended'.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should improve readability. Compare "thislongname" and
"thisLongName". The following keys are left in unchanged. We can
decide what to do with them later.
- am.keepcr
- core.autocrlf .safecrlf .trustctime
- diff.dirstat .noprefix
- gitcvs.usecrlfattr
- gui.blamehistoryctx .trustmtime
- pull.twohead
- receive.autogc
- sendemail.signedoffbycc .smtpsslcertpath .suppresscc
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an option to format-patch for reading a signature from a file.
$ git format-patch -1 --signature-file=$HOME/.signature
The config variable `format.signaturefile` can also be used to make
this the default.
$ git config format.signaturefile $HOME/.signature
$ git format-patch -1
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Thunderbird section of the 'MUA-specific hints' contains three
different approaches to setting up the mail client to leave patch
emails unmolested. The second approach (configuration) has a step
missing when configuring the composition window not to wrap. In
particular, the "mailnews.wraplength" configuration variable needs
to be set to zero. Update the documentation to add the missing
setting.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
This patch allows users to use the short form -q on
log and format-patch, which was non possible before.
Also the documentation of format-patch mentions -q now.
The documentation of log doesn't even talk about --quiet, so I'll leave
that for more experienced git contributors. ;)
It doesn't seem to change the default behavior, but in combination
with --stat for example it suppresses the actual stats.
however the only relevant code in log is
if (quiet)
rev->diffopt.output_format |= DIFF_FORMAT_NO_OUTPUT;
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Format-patch generates emails with the "From" address set to the
author of each patch. If you are going to send the emails, however,
you would want to replace the author identity with yours (if they
are not the same), and bump the author identity to an in-body
header.
Normally this is handled by git-send-email, which does the
transformation before sending out the emails. However, some
workflows may not use send-email (e.g., imap-send, or a custom
script which feeds the mbox to a non-git MUA). They could each
implement this feature themselves, but getting it right is
non-trivial (one must canonicalize the identities by reversing any
RFC2047 encoding or RFC822 quoting of the headers, which has caused
many bugs in send-email over the years).
This patch takes a different approach: it teaches format-patch a
"--from" option which handles the ident check and in-body header
while it is writing out the email. It's much simpler to do at this
level (because we haven't done any quoting yet), and any workflow
based on format-patch can easily turn it on.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also, add a new option: 'auto', so if there's more than one patch, the
cover letter is generated, otherwise it's not.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "format-patch" to prefix v4- to its output files for the
fourth iteration of a patch series, to make it easier for the
submitter to keep separate copies for iterations.
* jc/format-patch-reroll:
format-patch: give --reroll-count a short synonym -v
format-patch: document and test --reroll-count
format-patch: add --reroll-count=$N option
get_patch_filename(): split into two functions
get_patch_filename(): drop "just-numbers" hack
get_patch_filename(): simplify function signature
builtin/log.c: stop using global patch_suffix
builtin/log.c: drop redundant "numbered_files" parameter from make_cover_letter()
builtin/log.c: drop unused "numbered" parameter from make_cover_letter()
Accept "-v" as a synonym to "--reroll-count", so that users can say
"git format-patch -v4 master", instead of having to fully spell it
out as "git format-patch --reroll-count=4 master".
As I do not think of a reason why users would want to tell the
command to be "verbose", I think this should be OK.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove double negative, and include the repeat usage across
versions of a patch series.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Jeff King <peff@peff.net>
Even though I coded this, I am not sure what use scenarios would benefit
from this option, so the description is unnecessarily negative at this
moment. People who do want to use this feature need to come up with a
more plausible use case and replace it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The discussion of email subject throughout the documentation is
misleading; it indicates that the first line will always become
the subject. In fact, the subject is generally all lines up until
the first full blank line.
This patch refines that, and makes more use of the concept of a
commit title, with the title being all text up to the first blank line.
Signed-off-by: Jeremy White <jwhite@codeweavers.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In asciidoc 7, backticks like `foo` produced a typographic
effect, but did not otherwise affect the syntax. In asciidoc
8, backticks introduce an "inline literal" inside which markup
is not interpreted. To keep compatibility with existing
documents, asciidoc 8 has a "no-inline-literal" attribute to
keep the old behavior. We enabled this so that the
documentation could be built on either version.
It has been several years now, and asciidoc 7 is no longer
in wide use. We can now decide whether or not we want
inline literals on their own merits, which are:
1. The source is much easier to read when the literal
contains punctuation. You can use `master~1` instead
of `master{tilde}1`.
2. They are less error-prone. Because of point (1), we
tend to make mistakes and forget the extra layer of
quoting.
This patch removes the no-inline-literal attribute from the
Makefile and converts every use of backticks in the
documentation to an inline literal (they must be cleaned up,
or the example above would literally show "{tilde}" in the
output).
Problematic sites were found by grepping for '`.*[{\\]' and
examined and fixed manually. The results were then verified
by comparing the output of "html2text" on the set of
generated html pages. Doing so revealed that in addition to
making the source more readable, this patch fixes several
formatting bugs:
- HTML rendering used the ellipsis character instead of
literal "..." in code examples (like "git log A...B")
- some code examples used the right-arrow character
instead of '->' because they failed to quote
- api-config.txt did not quote tilde, and the resulting
HTML contained a bogus snippet like:
<tt><sub></tt> foo <tt></sub>bar</tt>
which caused some parsers to choke and omit whole
sections of the page.
- git-commit.txt confused ``foo`` (backticks inside a
literal) with ``foo'' (matched double-quotes)
- mentions of `A U Thor <author@example.com>` used to
erroneously auto-generate a mailto footnote for
author@example.com
- the description of --word-diff=plain incorrectly showed
the output as "[-removed-] and {added}", not "{+added+}".
- using "prime" notation like:
commit `C` and its replacement `C'`
confused asciidoc into thinking that everything between
the first backtick and the final apostrophe were meant
to be inside matched quotes
- asciidoc got confused by the escaping of some of our
asterisks. In particular,
`credential.\*` and `credential.<url>.\*`
properly escaped the asterisk in the first case, but
literally passed through the backslash in the second
case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The negated forms introduced in c426003 (format-patch: add --no-cc,
--no-to, and --no-add-headers, 2010-03-07) were not documented
anywhere. Add them to the descriptions of the positive forms.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/format-patch-doc:
Documentation/format-patch: suggest Toggle Word Wrap add-on for Thunderbird
Documentation: publicize hints for sending patches with GMail
Documentation: publicize KMail hints for sending patches inline
Documentation: hints for sending patches inline with Thunderbird
Documentation: explain how to check for patch corruption
Of the (now) three methods to send unmangled patches using Thunderbird,
this method is listed first because it provides a single-click on-demand
option rather than a permanent change of configuration like the other
two methods.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hints in SubmittingPatches about stopping GMail from clobbering
patches are widely useful both as examples of "git send-email" and
"git imap-send" usage.
Move the documentation to the appropriate places.
While at it, don't encourage storing passwords in config files.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These hints are in git's private SubmittingPatches document but a
wider audience might be interested. Move them to the "git
format-patch" manpage.
I'm not sure what gotchas these hints are meant to work around.
They might be completely false.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The standard reference for this information is the article
"Plain text e-mail - Thunderbird#Completely_plain_email" at
kb.mozillazine.org, but the hints hidden away in git's
SubmittingPatches file are more complete. Move them to the
"git format-patch" manual so they can be installed with git and
read by a wide audience.
While at it, make some tweaks:
- update "Approach #1" so it might work with Thunderbird 3;
- remove ancient version numbers from the descriptions of both
approaches so current readers might have more reason to
complain if they don't work.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SubmittingPatches has some excellent advice about how to check a patch
for corruption before sending it off. Move it to the format-patch
manual so it can be installed with git's documentation for use by
people not necessarily interested in the git project's practices.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a DISCUSSION section to the "git format-patch" manual to encourage
people to send patches in a form that can be applied by "git am"
automatically. There are two such forms:
1. The default form in which most metadata goes in the mail header
and the message body starts with the patch description;
2. The snipsnip form in which a message starts with pertinent
discussion and ends with a patch after a "scissors" mark.
The example requires QP encoding in the "Subject:" header intended for
the mailer to give the reader a chance to reflect on that, rather than
being startled by it later. By contrast, in-body "From:" and
"Subject:" lines should be human-readable and not QP encoded.
Inspired-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Drew Northup <drew.northup@maine.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
* maint:
Better advice on using topic branches for kernel development
Documentation: update implicit "--no-index" behavior in "git diff"
Documentation: expand 'git diff' SEE ALSO section
Documentation: diff can compare blobs
Documentation: gitrevisions is in section 7
shell portability: no "export VAR=VAL"
CodingGuidelines: reword parameter expansion section
Documentation: update-index: -z applies also to --index-info
Documentation: No argument of ALLOC_GROW should have side-effects
Fix references to gitrevisions(1) in the manual pages and HTML
documentation.
In practice, this will not matter much unless someone tries to use a
hard copy of the git reference manual.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the topmost three commits in a branch were merge commits, 'git
format-patch -3' used to output nothing. Since Git can't prepare
patches out of merge commits anyway, don't go over them in the first
place. 'git format-patch -3' now prepares three patches from the
topmost three commits without counting merge commits. Also add a
corresponding test in t4014-format-patch and update documentation.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, whenever we need documentation for revisions and ranges, we
link to the git-rev-parse man page, i.e. a plumbing man page, which has
this along with the documentation of all rev-parse modes.
Link to the new gitrevisions man page instead in all cases except
- when the actual git-rev-parse command is referred to or
- in very technical context (git-send-pack).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, git uses the version string as the signature for all
patches output by format-patch. Many employers (mine included)
require the use of a signature on all outgoing mails. In a
format-patch | send-email workflow there isn't an easy way to modify
the signature without breaking the pipe and manually replacing the
version string with the signature required. Instead of doing all that
work, add an option (--signature) and a config variable
(format.signature) to replace the default git version signature when
formatting patches.
This does modify the original behavior of format-patch a bit. First
off the version string is now placed in the cover letter by default.
Secondly, once the configuration variable format.signature is added
to the .config file there is no way to revert back to the default
git version signature. Instead, specifying the --no-signature option
will remove the signature from the patches entirely.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Has the same functionality as the '--cc' option and 'format.cc'
configuration variable but for the "To:" email header. Half of the code to
support this was already there.
With email the To: header usually more important than the Cc: header.
[jc: tests are by Stephen Boyd]
Signed-off-by: Steven Drake <sdrake@xnet.co.nz>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
Format git commands and options consistently using back quotes
(i.e. a fixed font in the resulting HTML document).
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This hopefully makes the relationship between threading options of
format-patch and send-email easier to grasp.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
