The bahavior of a bunch of code before the "if (refs)" statement also
depends on whether refs is set, so make the logic clearer by shifting
this code into the if statement.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/clone-detached:
clone: fix up delay cloning conditions
push: do not let configured foreign-vcs permanently clobbered
clone: print advice on checking out detached HEAD
clone: allow --branch to take a tag
clone: refuse to clone if --branch points to bogus ref
clone: --branch=<branch> always means refs/heads/<branch>
clone: delay cloning until after remote HEAD checking
clone: factor out remote ref writing
clone: factor out HEAD update code
clone: factor out checkout code
clone: write detached HEAD in bare repositories
t5601: add missing && cascade
* mh/ref-clone-without-extra-refs:
write_remote_refs(): create packed (rather than extra) refs
add_packed_ref(): new function in the refs API.
ref_array: keep track of whether references are sorted
pack_refs(): remove redundant check
6f48d39 (clone: delay cloning until after remote HEAD checking -
2012-01-16) allows us to perform some checks on remote refs before the
actual cloning happens. But not all transport types support
this. Remote helper with "import" capability will not return complete
ref information until fetch is performed and therefore the clone cannot
be delayed.
foreign_vcs field in struct remote was used to detect this kind of transport
and save the result. This is a mistake because foreign_vcs is designed
to override url-based transport detection. As a result, if the same
"struct transport *" object is used on many different urls and one of
them attached remote transport, the following urls will be mistakenly
attached to the same transport. This fault is worked around by dad0b3d
(push: do not let configured foreign-vcs permanently clobbered -
2012-01-23)
To fix this, detect incomplete refs from transport_get_remote_refs()
by SHA-1. Incomplete ones must have null SHA-1 (*). Then revert
changes related to foreign_cvs field in 6f48d39 and dad0b3d.
A good thing from this change is that cloning smart http transport can
also be delayed. Earlier it falls into the same category "remote
transport, no delay".
(*) Theoretically if one of the remote refs happens to have null SHA-1,
it will trigger false alarm and the clone will not be delayed. But
that chance may be too small for us to pay attention to.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_remote_refs() creates new packed refs from references obtained
from the remote repository, which is "out of thin air" as far as the
local repository is concerned. Previously it did this by creating
"extra" refs, then calling pack_refs() to bake them into the
packed-refs file. Instead, create packed refs (in the packed
reference cache) directly, then call pack_refs().
Aside from being more logical, this is another step towards removing
extra refs entirely.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because a tag ref cannot be put to HEAD, HEAD will become detached.
This is consistent with "git checkout <tag>".
This is mostly useful in shallow clone, where it allows you to clone a
tag in addtion to branches.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's possible that users make a typo in the branch name. Stop and let
users recheck. Falling back to remote's HEAD is not documented any
way.
Except when using remote helper, the pack has not been transferred at
this stage yet so we don't waste much bandwidth.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does not make sense to look outside refs/heads for HEAD's target
(src_ref_prefix can be set to "refs/" if --mirror is used) because ref
code only allows symref in form refs/heads/...
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This gives us an opportunity to abort the command during remote HEAD
check without wasting much bandwidth.
Cloning with remote-helper remains before the check because the remote
helper updates mapped_refs, which is necessary for remote ref checks.
foreign_vcs field is used to indicate the transport is handled by
remote helper.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at it, update the comment at "if (remote_head)"
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Read HEAD from disk instead of relying on local variable
our_head_points_at, so that if earlier code fails to make HEAD
properly, it'll be detected.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we don't write, HEAD is still at refs/heads/master as initialized
by init-db, which may or may not match remote's HEAD.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --single-branch is given, only one branch, either HEAD or one
specified by --branch, will be fetched. Also only tags that point to
the downloaded history are fetched.
This helps most in shallow clones, where it can reduce the download to
minimum and that is why it is enabled by default when --depth is given.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is to give an alternate <name> instead of "origin" to the remote
we are cloning from.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this patch,
$ git clone foo .
results in this:
Cloning into ....
done.
With it:
Cloning into '.'...
done.
Signed-off-by: Richard Hartmann <richih.mailinglist@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cloning from a local repository blindly copies or hardlinks all the files
under objects/ hierarchy. This results in two issues:
- If the repository cloned has an "objects/info/alternates" file, and the
command line of clone specifies --reference, the ones specified on the
command line get overwritten by the copy from the original repository.
- An entry in a "objects/info/alternates" file can specify the object
stores it borrows objects from as a path relative to the "objects/"
directory. When cloning a repository with such an alternates file, if
the new repository is not sitting next to the original repository, such
relative paths needs to be adjusted so that they can be used in the new
repository.
This updates add_to_alternates_file() to take the path to the alternate
object store, including the "/objects" part at the end (earlier, it was
taking the path to $GIT_DIR and was adding "/objects" itself), as it is
technically possible to specify in objects/info/alternates file the path
of a directory whose name does not end with "/objects".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add a test to expose a long-standing bug that is triggered when
cloning with --reference option from a local repository that has its own
alternates. The alternate object stores specified on the command line
are lost, and only alternates copied from the source repository remain.
The bug will be fixed in the next patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/clone-detached:
clone: always fetch remote HEAD
make copy_ref globally available
consider only branches in guess_remote_head
t: add tests for cloning remotes with detached HEAD
Clone does all of init, "remote add", fetch, and checkout
without giving the user a chance to intervene and set any
configuration. This patch allows you to set config options
in the newly created repository after the clone, but before
we do any other operations.
In many cases, this is a minor convenience over something
like:
git clone git://...
git config core.whatever true
But in some cases, it can bring extra efficiency by changing
how the fetch or checkout work. For example, setting
line-ending config before the checkout avoids having to
re-checkout all of the contents with the correct line
endings.
It also provides a mechanism for passing information to remote
helpers during a clone; the helpers may read the git config
to influence how they operate.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In most cases, fetching the remote HEAD explicitly is
unnecessary. It's just a symref pointing to a branch which
we are already fetching, so we will already ask for its sha1.
However, if the remote has a detached HEAD, things are less
certain. We do not ask for HEAD's sha1, but we do try to
write it into a local detached HEAD. In most cases this is
fine, as the remote HEAD is pointing to some part of the
history graph that we will fetch via the refs.
But if the remote HEAD points to an "orphan" commit (one
which was is not an ancestor of any refs), then we will not
have the object, and update_ref will complain when we try to
write the detached HEAD, aborting the whole clone.
This patch makes clone always explicitly ask the remote for
the sha1 of its HEAD commit. In the non-detached case, this
is a no-op, as we were going to ask for that sha1 anyway. In
the regular detached case, this will add an extra "want" to
the protocol negotiation, but will not change the history
that gets sent. And in the detached orphan case, we will
fetch the orphaned history so that we can write it into our
local detached HEAD.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/i18n-fixup: (24 commits)
i18n: use test_i18n{cmp,grep} in t7600, t7607, t7611 and t7811
i18n: use test_i18n{grep,cmp} in t7508
i18n: use test_i18ngrep in t7506
i18n: use test_i18ngrep and test_i18ncmp in t7502
i18n: use test_i18ngrep in t7501
i18n: use test_i18ncmp in t7500
i18n: use test_i18ngrep in t7201
i18n: use test_i18ncmp and test_i18ngrep in t7102 and t7110
i18n: use test_i18ncmp and test_i18ngrep in t5541, t6040, t6120, t7004, t7012 and t7060
i18n: use test_i18ncmp and test_i18ngrep in t3700, t4001 and t4014
i18n: use test_i18ncmp and test_i18ngrep in t3203, t3501 and t3507
i18n: use test_i18ngrep in t2020, t2204, t3030, and t3200
i18n: use test_i18ngrep in lib-httpd and t2019
i18n: do not overuse C_LOCALE_OUTPUT (grep)
i18n: use test_i18ncmp in t1200 and t2200
i18n: .git file is not a human readable message (t5601)
i18n: do not overuse C_LOCALE_OUTPUT
i18n: mark init-db messages for translation
i18n: mark checkout plural warning for translation
i18n: mark checkout --detach messages for translation
...
Mark the "repository '%s' does not exist" message added in
v1.7.4.2~21^2 (clone: die when trying to clone missing local path) by
Jeff King for translation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix warnings from 'make check'.
- These files don't include 'builtin.h' causing sparse to complain that
cmd_* isn't declared:
builtin/clone.c:364, builtin/fetch-pack.c:797,
builtin/fmt-merge-msg.c:34, builtin/hash-object.c:78,
builtin/merge-index.c:69, builtin/merge-recursive.c:22
builtin/merge-tree.c:341, builtin/mktag.c:156, builtin/notes.c:426
builtin/notes.c:822, builtin/pack-redundant.c:596,
builtin/pack-refs.c:10, builtin/patch-id.c:60, builtin/patch-id.c:149,
builtin/remote.c:1512, builtin/remote-ext.c:240,
builtin/remote-fd.c:53, builtin/reset.c:236, builtin/send-pack.c:384,
builtin/unpack-file.c:25, builtin/var.c:75
- These files have symbols which should be marked static since they're
only file scope:
submodule.c:12, diff.c:631, replace_object.c:92, submodule.c:13,
submodule.c:14, trace.c:78, transport.c:195, transport-helper.c:79,
unpack-trees.c:19, url.c:3, url.c:18, url.c:104, url.c:117, url.c:123,
url.c:129, url.c:136, thread-utils.c:21, thread-utils.c:48
- These files redeclare symbols to be different types:
builtin/index-pack.c:210, parse-options.c:564, parse-options.c:571,
usage.c:49, usage.c:58, usage.c:63, usage.c:72
- These files use a literal integer 0 when they really should use a NULL
pointer:
daemon.c:663, fast-import.c:2942, imap-send.c:1072, notes-merge.c:362
While we're in the area, clean up some unused #includes in builtin files
(mostly exec_cmd.h).
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/trace-sifter:
trace: give repo_setup trace its own key
add packet tracing debug code
trace: add trace_strbuf
trace: factor out "do we want to trace" logic
trace: refactor to support multiple env variables
trace: add trace_vprintf
--separate-git-dir tells git to create git dir at the specified
location, instead of where it is supposed to be. A .git file that
points to that location will be put in place so that it appears normal
to repo discovery process.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the make_*_path functions so it's clearer what they do, in
particlar make clear what the differnce between make_absolute_path and
make_nonrelative_path is by renaming them real_path and absolute_path
respectively. make_relative_path has an understandable name and is
renamed to relative_path to maintain the name convention.
The function calls have been replaced 1-to-1 in their usage.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Separate the "Cloning into %s" and "Cloning into bare repository %s"
messages to make them easier to translate. No noticeable change
intended.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This shows a trace of all packets coming in or out of a given
program. This can help with debugging object negotiation or
other protocol issues.
To keep the code changes simple, we operate at the lowest
level, meaning we don't necessarily understand what's in the
packets. The one exception is a packet starting with "PACK",
which causes us to skip that packet and turn off tracing
(since the gigantic pack data will not be interesting to
read, at least not in the trace format).
We show both written and read packets. In the local case,
this may mean you will see packets twice (written by the
sender and read by the receiver). However, for cases where
the other end is remote, this allows you to see the full
conversation.
Packet tracing can be enabled with GIT_TRACE_PACKET=<foo>,
where <foo> takes the same arguments as GIT_TRACE.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 86ac751 (Allow cloning an empty repository,
2009-01-23), doing:
git clone does-not-exist
has created does-not-exist as an empty repository. This was
an unintentional side effect of 86ac751. Even weirder,
doing:
git clone does-not-exist new-dir
_does_ fail, making this "feature" (if you want to consider
it such) broken. Let's detect this situation and explicitly
die. It's almost certainly not what the user intended.
This patch also adds two tests. One for the missing path
case, and one to confirm that a similar case, cloning a
non-repository directory, fails.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also corrects a wrong description for clone.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recurse_submodules option was added in ccdd3da6 to bring 'git clone'
into line with 'git fetch' and future commands. The correct option should
have been "recurse-submodules".
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 1.6.5 "git clone" honors the --recursive option to recursively check
out submodules too. As this option can easily be misinterpreted when it is
added to other commands like "git grep", add the new --recurse-submodules
option as an alias for --recursive so the same option can be used for all
commands recursing into submodules.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sr/remote-helper-export:
t5800: testgit helper requires Python support
Makefile: Simplify handling of python scripts
remote-helpers: add tests for testgit helper
remote-helpers: add testgit helper
remote-helpers: add support for an export command
remote-helpers: allow requesing the path to the .git directory
fast-import: always create marks_file directories
clone: also configure url for bare clones
clone: pass the remote name to remote_get
Conflicts:
Makefile
When cloning into a non-bare repository, e.g. "git clone $URL mine",
we used to report that we are cloning into "mine/.git". Reword the
report to say "Cloning into mine" instead, as that matches what the
end-user asked for closer.
Make the message for "git clone --bare $URL mine" to say "Cloning
into bare repository mine" do make the distinction between this case and
the above stand out a bit more prominently.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Pete Harlan <pgit@pcharlan.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, a local git clone reports only initializing an empty
git dir, which is potentially confusing.
Instead, report that cloning is in progress and when it is done
(unless -q) is given, and suppress the init report.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
