In the NO_PTHREADS or !num_threads case, this doesn't change
anything. In the threaded case, note that grep_source_init duplicates
its third argument, so there is no need to keep [path]buf.buf alive
across the call of add_work().
Signed-off-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep_source_init typically does three strdup()s, and in the threaded
case, the call from add_work() happens while holding grep_mutex.
We can thus reduce the time we hold grep_mutex by moving the
grep_source_init() call out of add_work(), and simply have add_work()
copy the initialized structure to the available slot in the todo
array.
This also simplifies the prototype of add_work(), since it no longer
needs to duplicate all the parameters of grep_source_init(). In the
callers of add_work(), we get to reduce the amount of code duplicated in
the threaded and non-threaded cases slightly (avoiding repeating the
long "GREP_SOURCE_OID, pathbuf.buf, path, oid" argument list); a
subsequent cleanup patch will make that even more so.
Signed-off-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--show-all" revision option shows UNINTERESTING
commits. Some of these commits may be unparsed when we try
to show them (since we may or may not need to walk their
parents to fulfill the request).
Commit 3131b71301 (Add "--show-all" revision walker flag for
debugging, 2008-02-09) resolved this by just skipping
pretty-printing for commits without their object contents
cached, saying:
Because we now end up listing commits we may not even have been parsed
at all "show_log" and "show_commit" need to protect against commits
that don't have a commit buffer entry.
That was the easy fix to avoid the pretty-printer segfaulting,
but:
1. It doesn't work for all formats. E.g., --oneline
prints the oid for each such commit but not a trailing
newline, leading to jumbled output.
2. It only affects some commits, depending on whether we
happened to parse them or not (so if they were at the
tip of an UNINTERESTING starting point, or if we
happened to traverse over them, you'd see more data).
3. It unncessarily ties the decision to show the verbose
header to whether the commit buffer was cached. That
makes it harder to change the logic around caching
(e.g., if we could traverse without actually loading
the full commit objects).
These days it's safe to feed such a commit to the
pretty-print code. Since be5c9fb904 (logmsg_reencode: lazily
load missing commit buffers, 2013-01-26), we'll load it on
demand in such a case. So let's just always show the verbose
headers.
This does change the behavior of plumbing, but:
a. The --show-all option was explicitly introduced as a
debugging aid, and was never documented (and has rarely
even been mentioned on the list by git devs).
b. Avoiding the commits was already not deterministic due
to (2) above. So the caller might have seen full
headers for these commits anyway, and would need to be
prepared for it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is similar to ff1e72483 (tag: change default of `pager.tag` to
"on", 2017-08-02) and is safe now that we do not consider `pager.config`
at all when we are not listing or getting configuration. This change
will help with listing large configurations, but will not hurt users of
`git config --edit` as it would have before the previous commit.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to de121ffe5 (tag: respect `pager.tag` in list-mode only,
2017-08-02), use the DELAY_PAGER_CONFIG-mechanism to only respect
`pager.config` when we are listing or "get"ing config.
We have several getters and some are guaranteed to give at most one line
of output. Paging all getters including those could be convenient from a
documentation point-of-view. The downside would be that a misconfigured
or not so modern pager might wait for user interaction before
terminating. Let's instead respect the config for precisely those
getters which may produce more than one line of output.
`--get-urlmatch` may or may not produce multiple lines of output,
depending on the exact usage. Let's not try to recognize the two modes,
but instead make `--get-urlmatch` always respect the config. Analyzing
the detailed usage might be trivial enough here, but could establish a
precedent that we will never be able to enforce throughout the codebase
and that will just open a can of worms.
This fixes the failing test added in the previous commit. Also adapt the
test for whether `git config foo.bar bar` and `git config --get foo.bar`
respects `pager.config`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" learned to give 72-cols to diffstat, which is
consistent with other line length limits the subcommand uses for
its output meant for e-mails.
* nd/format-patch-stat-width:
format-patch: reduce patch diffstat width to 72
format-patch: keep cover-letter diffstat wrapped in 72 columns
Long time ago at fab47d05 ("merge: force edit and no-ff mode when
merging a tag object", 2011-11-07), "git merge" was made to always
create a merge commit when merging a tag, even when the side branch
being merged is a descendant of the current branch.
This default is good for merges made by upstream maintainers to
integrate work signed by downstream contributors, but will leave
pointless no-ff merges when downstream contributors pull a newer
release tag to make their long-running topic branches catch up with
the upstream. When there is no local work left on the topic, such a
merge should simply fast-forward to the commit pointed at by the
release tag.
Update the default (again) for "git merge" that merges a tag object
to (1) --no-ff (i.e. create a merge commit even when side branch
fast forwards) if the tag being merged is not at its expected place
in refs/tags/ hierarchy and (2) --ff (i.e. allow fast-forward update
when able) otherwise.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone $there $here" is allowed even when here directory exists
as long as it is an empty directory, but the command incorrectly
removed it upon a failure of the operation.
* jk/abort-clone-with-existing-dest:
clone: do not clean up directories we didn't create
clone: factor out dir_exists() helper
t5600: modernize style
t5600: fix outdated comment about unborn HEAD
API clean-up around revision traversal.
* rs/lose-leak-pending:
commit: remove unused function clear_commit_marks_for_object_array()
revision: remove the unused flag leak_pending
checkout: avoid using the rev_info flag leak_pending
bundle: avoid using the rev_info flag leak_pending
bisect: avoid using the rev_info flag leak_pending
object: add clear_commit_marks_all()
ref-filter: use clear_commit_marks_many() in do_merge_filter()
commit: use clear_commit_marks_many() in remove_redundant()
commit: avoid allocation in clear_commit_marks_many()
An old regression in "git describe --all $annotated_tag^0" has been
fixed.
* dk/describe-all-output-fix:
describe: prepend "tags/" when describing tags with embedded name
More abstraction of hash function from the codepath.
* bc/hash-algo:
hash: update obsolete reference to SHA1_HEADER
bulk-checkin: abstract SHA-1 usage
csum-file: abstract uses of SHA-1
csum-file: rename sha1file to hashfile
read-cache: abstract away uses of SHA-1
pack-write: switch various SHA-1 values to abstract forms
pack-check: convert various uses of SHA-1 to abstract forms
fast-import: switch various uses of SHA-1 to the_hash_algo
sha1_file: switch uses of SHA-1 to the_hash_algo
builtin/unpack-objects: switch uses of SHA-1 to the_hash_algo
builtin/index-pack: improve hash function abstraction
hash: create union for hash context allocation
hash: move SHA-1 macros to hash.h
The way "git reset --hard" reports the commit the updated HEAD
points at is made consistent with the way how the commit title is
generated by the other parts of the system. This matters when the
title is spread across physically multiple lines.
* tg/reset-hard-show-head-with-pretty:
reset --hard: make use of the pretty machinery
"git pull --rebase" did not pass verbosity setting down when
recursing into a submodule.
* sb/pull-rebase-submodule:
builtin/pull: respect verbosity settings in submodules
Although "git worktree add" learned to run the 'post-checkout' hook in
ade546be47 (worktree: invoke post-checkout hook, 2017-12-07), it
neglected to change to the directory of the newly-created worktree
before running the hook. Instead, the hook runs within the directory
from which the "git worktree add" command itself was invoked, which
effectively neuters the hook since it knows nothing about the new
worktree directory.
Further, ade546be47 failed to sanitize the environment before running
the hook, which means that user-assigned values of GIT_DIR and
GIT_WORK_TREE could mislead the hook about the location of the new
worktree. In the case of "git worktree add" being run from a bare
repository, the GIT_DIR="." assigned by Git itself leaks into the hook's
environment and breaks Git commands; this is so even when the working
directory is correctly changed to the new worktree before the hook runs
since ".", relative to the new worktree directory, does not point at the
bare repository.
Fix these problems by (1) changing to the new worktree's directory
before running the hook, and (2) sanitizing the environment of GIT_DIR
and GIT_WORK_TREE so hooks can't be confused by misleading values.
Enhance the t2025 'post-checkout' tests to verify that the hook is
indeed run within the correct directory and that Git commands invoked by
the hook compute Git-dir and top-level worktree locations correctly.
While at it, also add two new tests: (1) verify that the hook is run
within the correct directory even when the new worktree is created from
a sibling worktree (as opposed to the main worktree); (2) verify that
the hook is provided with correct context when the new worktree is
created from a bare repository (test provided by Lars Schneider).
Implementation Notes:
Rather than sanitizing the environment of GIT_DIR and GIT_WORK_TREE, an
alternative would be to set them explicitly, as is already done for
other Git commands run internally by "git worktree add". This patch opts
instead to sanitize the environment in order to clearly document that
the worktree is fully functional by the time the hook is run, thus does
not require special environmental overrides.
The hook is run manually, rather than via run_hook_le(), since it needs
to change the working directory to that of the worktree, and
run_hook_le() does not provide such functionality. As this is a one-off
case, adding 'run_hook' overloads which allow the directory to be set
does not seem warranted at this time.
Reported-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Among the "in progress" commands, only git-am and git-merge do not
support --quit. Support --quit in git-am too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sequencer infrastructure is shared across "git cherry-pick",
"git rebase -i", etc., and has always spawned "git commit" when it
needs to create a commit. It has been taught to do so internally,
when able, by reusing the codepath "git commit" itself uses, which
gives performance boost for a few tens of percents in some sample
scenarios.
* pw/sequencer-in-process-commit:
sequencer: run 'prepare-commit-msg' hook
t7505: add tests for cherry-pick and rebase -i/-p
t7505: style fixes
sequencer: assign only free()able strings to gpg_sign
sequencer: improve config handling
t3512/t3513: remove KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT=1
sequencer: try to commit without forking 'git commit'
sequencer: load commit related config
sequencer: simplify adding Signed-off-by: trailer
commit: move print_commit_summary() to libgit
commit: move post-rewrite code to libgit
Add a function to update HEAD after creating a commit
commit: move empty message checks to libgit
t3404: check intermediate squash messages
The tracing machinery learned to report tweaking of environment
variables as well.
* nd/trace-with-env:
run-command.c: print new cwd in trace_run_command()
run-command.c: print env vars in trace_run_command()
run-command.c: print program 'git' when tracing git_cmd mode
run-command.c: introduce trace_run_command()
trace.c: move strbuf_release() out of print_trace_line()
trace: avoid unnecessary quoting
sq_quote_argv: drop maxlen parameter
Rewrite two more "git submodule" subcommands in C.
* pc/submodule-helper:
submodule: port submodule subcommand 'deinit' from shell to C
submodule: port submodule subcommand 'sync' from shell to C
Retire mru API as it does not give enough abstraction over
underlying list API to be worth it.
* gs/retire-mru:
mru: Replace mru.[ch] with list.h implementation
The first step to getting rid of mru API and using the
doubly-linked list API directly instead.
* ot/mru-on-list:
mru: use double-linked list from list.h
The machinery to clone & fetch, which in turn involves packing and
unpacking objects, have been told how to omit certain objects using
the filtering mechanism introduced by the jh/object-filtering
topic, and also mark the resulting pack as a promisor pack to
tolerate missing objects, taking advantage of the mechanism
introduced by the jh/fsck-promisors topic.
* jh/partial-clone:
t5616: test bulk prefetch after partial fetch
fetch: inherit filter-spec from partial clone
t5616: end-to-end tests for partial clone
fetch-pack: restore save_commit_buffer after use
unpack-trees: batch fetching of missing blobs
clone: partial clone
partial-clone: define partial clone settings in config
fetch: support filters
fetch: refactor calculation of remote list
fetch-pack: test support excluding large blobs
fetch-pack: add --no-filter
fetch-pack, index-pack, transport: partial clone
upload-pack: add object filtering for partial clone
In preparation for implementing narrow/partial clone, the machinery
for checking object connectivity used by gc and fsck has been
taught that a missing object is OK when it is referenced by a
packfile specially marked as coming from trusted repository that
promises to make them available on-demand and lazily.
* jh/fsck-promisors:
gc: do not repack promisor packfiles
rev-list: support termination at promisor objects
sha1_file: support lazily fetching missing objects
introduce fetch-object: fetch one promisor object
index-pack: refactor writing of .keep files
fsck: support promisor objects as CLI argument
fsck: support referenced promisor objects
fsck: support refs pointing to promisor objects
fsck: introduce partialclone extension
extension.partialclone: introduce partial clone extension
The new command `git rebase --show-current-patch` is useful for seeing
the commit related to the current rebase state. Some however may find
the "git show" command behind it too limiting. You may want to
increase context lines, do a diff that ignores whitespaces...
For these advanced use cases, the user can execute any command they
want with the new pseudo ref REBASE_HEAD.
This also helps show where the stopped commit is from, which is hard
to see from the previous patch which implements --show-current-patch.
Helped-by: Tim Landscheidt <tim@tim-landscheidt.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is useful to see the full patch while resolving conflicts in a
rebase. The only way to do it now is
less .git/rebase-*/patch
which could turn out to be a lot longer to type if you are in a
linked worktree, or not at top-dir. On top of that, an ordinary user
should not need to peek into .git directory. The new option is
provided to examine the patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pointing the user to $GIT_DIR/rebase-apply may encourage them to mess
around in there, which is not a good thing. With this, the user does
not have to keep the path around somewhere (because after a couple of
commands, the path may be out of scrollback buffer) when they need to
look at the patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree remove" basically consists of two things
- delete $GIT_WORK_TREE
- delete $GIT_DIR (which is $SUPER_GIT_DIR/worktrees/something)
If $GIT_WORK_TREE is already gone for some reason, we should be able
to finish the job by deleting $GIT_DIR.
Two notes:
- $GIT_WORK_TREE _can_ be missing if the worktree is locked. In that
case we must not delete $GIT_DIR because the real $GIT_WORK_TREE may
be in a usb stick somewhere. This is already handled because we
check for lock first.
- validate_worktree() is still called because it may do more checks in
future (and it already does something else, like checking main
worktree, but that's irrelevant in this case)
Noticed-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command allows to delete a worktree. Like 'move' you cannot
remove the main worktree, or one with submodules inside [1].
For deleting $GIT_WORK_TREE, Untracked files or any staged entries are
considered precious and therefore prevent removal by default. Ignored
files are not precious.
When it comes to deleting $GIT_DIR, there's no "clean" check because
there should not be any valuable data in there, except:
- HEAD reflog. There is nothing we can do about this until somebody
steps up and implements the ref graveyard.
- Detached HEAD. Technically it can still be recovered. Although it
may be nice to warn about orphan commits like 'git checkout' does.
[1] We do 'git status' with --ignore-submodules=all for safety
anyway. But this needs a closer look by submodule people before we
can allow deletion. For example, if a submodule is totally clean,
but its repo not absorbed to the main .git dir, then deleting
worktree also deletes the valuable .submodule repo too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Submodules contains .git files with relative paths. After a worktree
move, these files need to be updated or they may point to nowhere.
This is a bandage patch to make sure "worktree move" don't break
people's worktrees by accident. When .git file update code is in
place, this validate_no_submodules() could be removed.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to "mv a b/", which is actually "mv a b/a", we extract basename
of source worktree and create a directory of the same name at
destination if dst path is a directory.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command allows to relocate linked worktrees. Main worktree cannot
(yet) be moved.
There are two options to move the main worktree, but both have
complications, so it's not implemented yet. Anyway the options are:
- convert the main worktree to a linked one and move it away, leave
the git repository where it is. The repo essentially becomes bare
after this move.
- move the repository with the main worktree. The tricky part is make
sure all file descriptors to the repository are closed, or it may
fail on Windows.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In check_ignore(), the first pathspec item determines the dtype for any
subsequent ones. That means that a pathspec matching a regular file can
prevent following pathspecs from matching directories, which makes no
sense. Fix that by determining the dtype for each pathspec separately,
by passing the value DT_UNKNOWN to last_exclude_matching() each time.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to 644eb60bd0 (builtin/describe.c: describe a blob,
2017-11-15), we noticed and complained about missing
objects, since they were not valid commits:
$ git describe 0000000000000000000000000000000000000000
fatal: 0000000000000000000000000000000000000000 is not a valid 'commit' object
After that commit, we feed any non-commit to lookup_blob(),
and complain only if it returns NULL. But the lookup_*
functions do not actually look at the on-disk object
database at all. They return an entry from the in-memory
object hash if present (and if it matches the requested
type), and otherwise auto-create a "struct object" of the
requested type.
A missing object would hit that latter case: we create a
bogus blob struct, walk all of history looking for it, and
then exit successfully having produced no output.
One reason nobody may have noticed this is that some related
cases do still work OK:
1. If we ask for a tree by sha1, then the call to
lookup_commit_referecne_gently() would have parsed it,
and we would have its true type in the in-memory object
hash.
2. If we ask for a name that doesn't exist but isn't a
40-hex sha1, then get_oid() would complain before we
even look at the objects at all.
We can fix this by replacing the lookup_blob() call with a
check of the true type via sha1_object_info(). This is not
quite as efficient as we could possibly make this check. We
know in most cases that the object was already parsed in the
earlier commit lookup, so we could call lookup_object(),
which does auto-create, and check the resulting struct's
type (or NULL). However it's not worth the fragility nor
code complexity to save a single object lookup.
The new tests cover this case, as well as that of a
tree-by-sha1 (which does work as described above, but was
not explicitly tested).
Noticed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the new --prune-tags option work properly when git-fetch is
invoked with a <url> parameter instead of a <remote name>
parameter.
This change is split off from the introduction of --prune-tags due to
the relative complexity of munging the incoming argv, which is easier
to review as a separate change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --prune-tags option to git-fetch, along with fetch.pruneTags
config option and a -P shorthand (-p is --prune). This allows for
doing any of:
git fetch -p -P
git fetch --prune --prune-tags
git fetch -p -P origin
git fetch --prune --prune-tags origin
Or simply:
git config fetch.prune true &&
git config fetch.pruneTags true &&
git fetch
Instead of the much more verbose:
git fetch --prune origin 'refs/tags/*:refs/tags/*' '+refs/heads/*:refs/remotes/origin/*'
Before this feature it was painful to support the use-case of pulling
from a repo which is having both its branches *and* tags deleted
regularly, and have our local references to reflect upstream.
At work we create deployment tags in the repo for each rollout, and
there's *lots* of those, so they're archived within weeks for
performance reasons.
Without this change it's hard to centrally configure such repos in
/etc/gitconfig (on servers that are only used for working with
them). You need to set fetch.prune=true globally, and then for each
repo:
git -C {} config --replace-all remote.origin.fetch "refs/tags/*:refs/tags/*" "^\+*refs/tags/\*:refs/tags/\*$"
Now I can simply set fetch.pruneTags=true in /etc/gitconfig as well,
and users running "git pull" will automatically get the pruning
semantics I want.
Even though "git remote" has corresponding "prune" and "update
--prune" subcommands I'm intentionally not adding a corresponding
prune-tags or "update --prune --prune-tags" mode to that command.
It's advertised (as noted in my recent "git remote doc: correct
dangerous lies about what prune does") as only modifying remote
tracking references, whereas any --prune-tags option is always going
to modify what from the user's perspective is a local copy of the tag,
since there's no such thing as a remote tracking tag.
Ideally add_prune_tags_to_fetch_refspec() would be something that
would use ALLOC_GROW() to grow the 'fetch` member of the 'remote'
struct. Instead I'm realloc-ing remote->fetch and adding the
tag_refspec to the end.
The reason is that parse_{fetch,push}_refspec which allocate the
refspec (ultimately remote->fetch) struct are called many places that
don't have access to a 'remote' struct. It would be hard to change all
their callsites to be amenable to carry around the bookkeeping
variables required for dynamic allocation.
All the other callers of the API first incrementally construct the
string version of the refspec in remote->fetch_refspec via
add_fetch_refspec(), before finally calling parse_fetch_refspec() via
some variation of remote_get().
It's less of a pain to deal with the one special case that needs to
modify already constructed refspecs than to chase down and change all
the other callsites. The API I'm adding is intentionally not
generalized because if we add more of these we'd probably want to
re-visit how this is done.
See my "Re: [BUG] git remote prune removes local tags, depending on
fetch config" (87po6ahx87.fsf@evledraar.gmail.com;
https://public-inbox.org/git/87po6ahx87.fsf@evledraar.gmail.com/) for
more background info.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Access the "remote" variable passed to the fetch_one() directly rather
than through the gtransport wrapper struct constructed in this
function for other purposes.
This makes the code more readable, as it's now obvious that the remote
struct doesn't somehow get munged by the prepare_transport() function
above, which takes the "remote" struct as an argument and constructs
the "gtransport" struct, containing among other things the "remote"
struct.
A subsequent change will copy this pattern to access a new
remote->prune_tags field, but without the use of the gtransport
variable. It's useful once that change lands to see that the two
pieces of code behave exactly the same.
This pattern of accessing the container struct was added in
737c5a9cde ("fetch: make --prune configurable", 2013-07-13) when this
code was initially introduced.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Trivially refactor an assignment to make a subsequent patch
smaller. The "ref_nr" variable is initialized to 0 earlier, just as
"j" is, and "j" is only incremented in that loop, so this change isn't
a logic error.
This change simplifies a subsequent change, which will split the
incrementing of "ref_nr" into two blocks.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop redundantly NULL-ing the last element of the refs structure,
which was retrieved via calloc(), and is thus guaranteed to be
pre-NULL'd.
This code dates back to b888d61c83 ("Make fetch a builtin",
2007-09-10), where wasn't any reason to do this back then either, it's
just boilerplate left over from when git-fetch was initially
introduced.
The motivation for this change was to make a subsequent change which
would also modify the refs variable smaller, since it won't have to
copy this redundant "NULL the last + 1 item" pattern.
We may not end up keeping that change, but as this pattern is still
pointless, so let's fix it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options for "worktree add" are:
--checkout
--guess-remote
--lock
--track
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote --mirror" is a special case. Technically it is possible to
specify --mirror without any argument. But we will get a "dangerous,
deprecated!" warning in that case.
This new parse-opt flag allows --git-completion-helper to always
complete --mirror=, ignoring the dangerous use case.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are:
--allow-empty (notes add and notes append)
--for-rewrite= (notes copy)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are --quiet and --upload-pack=.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are --exclude and --interactive
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are:
--ignore-other-worktrees
--progress
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--force option is most likely hidden from command line completion for
safety reasons. This is done by adding an extra flag
PARSE_OPT_NOCOMPLETE. Update OPT__FORCE() to accept additional
flags. Actual flag change comes later depending on individual
commands.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The packet_read_line() function dies if it gets an
unexpected EOF. It only returns NULL if we get a flush
packet (or technically, a zero-length "0004" packet, but
nobody is supposed to send those, and they are
indistinguishable from a flush in this interface).
Let's correct error messages which claim an unexpected EOF;
it's really an unexpected flush packet.
While we're here, let's also check "!line" instead of
"!len" in the second case. The two events should always
coincide, but checking "!line" makes it more obvious that we
are not about to dereference NULL.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --edit option whichs allows modifying the messages provided by -m or -F,
the same way git commit --edit does.
Signed-off-by: Nicolas Morey-Chaisemartin <NMoreyChaisemartin@suse.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line parser of "git blame" is prepared to take an
ancient odd argument order "blame <path> <rev>" in addition to the
usual "blame [<rev>] <path>". It has at least two negative
ramifications:
- In order to tell these two apart, it checks if the last command
line argument names a path in the working tree, using
file_exists(). However, "blame <rev> <path>" is a request to
explain each and every line in the contents of <path> stored in
revision <rev> and does not need to have a working tree version
of the file. A check with file_exists() is simply wrong.
- To coerce that mistaken file_exists() check to work, the code
calls setup_work_tree() before doing so, because the path it has
is relative to the top-level of the project tree. However,
"blame <rev> <path>" MUST be usable even in a bare repository,
and there is no reason for letting setup_work_tree() complain
and die with "This operation must be run in a work tree".
To correct the former, switch to check if the last token is a
revision (and if so, parse arguments using "blame <path> <rev>"
rule). Correct the latter by getting rid of setup_work_tree() and
file_exists() check--the only case the call to this function matters
is when we are running "blame <path>" (i.e. no starting revision and
asking to blame the working tree file at <path>, digging through the
HEAD revision), but there is a call in setup_scoreboard() just
before it calls fake_working_tree_commit().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a127331cd (mv: allow moving nested submodules,
2016-04-19), introduced
if (show_only) continue;
in this for-loop before
if (!show_only)
which became redundant, because it is now always true.
Signed-off-by: Stefan Moch <stefanmoch@mail.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option allows commits with empty commit messages to be rebased,
matching the same option in git-commit and git-cherry-pick. While empty
log messages are frowned upon, sometimes one finds them in older
repositories (e.g. translated from another VCS [0]), or have other
reasons for desiring them. The option is available in git-commit and
git-cherry-pick, so it is natural to make other git tools play nicely
with them. Adding this as an option allows the default to be "give the
user a chance to fix", while not interrupting the user's workflow
otherwise [1].
[0]: https://stackoverflow.com/q/8542304
[1]: https://public-inbox.org/git/7vd33afqjh.fsf@alter.siamese.dyndns.org/
To implement this, add a new --allow-empty-message flag. Then propagate
it to all calls of 'git commit', 'git cherry-pick', and 'git rebase--helper'
within the rebase scripts.
Signed-off-by: Genki Sky <sky@genki.is>
Reviewed-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
reset --hard currently uses its own logic for printing the first line of
the commit message in its output. Instead of just using the first line,
use the pretty machinery to create the output.
In addition to the easier to follow code, this makes the output more
consistent with other commands that print the title of the commit, such
as 'git commit --oneline' or 'git checkout', which both use
'pp_commit_easy()' with the CMIT_FMT_ONELINE modifier.
It is a slight change of the output if the second line of the commit
message is not a blank line, i.e. if the commit message is
foo
bar
previously we would print "HEAD is now at 000000 foo", while after
this change we print "HEAD is now at 000000 foo bar", same as 'git log
--oneline' shows "000000 foo bar".
So this does make the output more consistent with other commands, and
'reset' is a porcelain command, so nobody should be parsing the output
in scripts.
The current behaviour dates back to 0e5a7faa3a ("Make "git reset" a
builtin.", 2007-09-11), so I assume (without digging into the old
codebase too much) that the logic was implemented because there was
no convenience function such as 'pp_commit_easy' that would do this
already.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename struct sha1file to struct hashfile, along with all of its related
functions.
The transformation in this commit was made by global search-and-replace.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch various uses of explicit calls to SHA-1 into references to
the_hash_algo to better abstract away the various uses of it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert several uses of unsigned char [20] to struct object_id and
convert various hard-coded constants and uses of SHA-1 functions to use
the_hash_algo.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Patches generated by format-patch are meant to be exchanged as emails,
most of the time. And since it's generally agreed that text in mails
should be wrapped around 70 columns or so, make sure these diffstat
follow the convention (especially when used with --cover-letter since we
already defaults to wrapping 72 columns). The default can still be
overriden with command line options.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function was already converted to use struct object_id earlier.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the definition and declaration of force_object_loose to
struct object_id and adjust usage of this function.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the definition and declaration of write_sha1_file to
struct object_id and adjust usage of this function.
This commit also converts static function write_sha1_file_prepare, as it
is closely related.
Rename these functions to write_object_file and
write_object_file_prepare respectively.
Replace sha1_to_hex, hashcpy and hashclr with their oid equivalents
wherever possible.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the definitions and declarations of commit_tree and
commit_tree_extended to use struct object_id and adjust all usages of
these functions.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the declaration and definition of hash_sha1_file to use
struct object_id and adjust all function calls.
Rename this function to hash_object_file.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a6d7eb2c7a (pull: optionally rebase submodules (remote submodule
changes only), 2017-06-23), we taught Git how to rebase submodules in
a pull. However we missed to pass on the verbosity settings.
Reported-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already wrap shortlog around 72 columns in cover letters. Do the same
for diffstat (also in cover letters).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach long (normal) status format to respect the --no-ahead-behind
parameter and skip the possibly expensive ahead/behind computation
between the branch and the upstream.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "git status" and "git commit" to accept "--no-ahead-behind"
and "--ahead-behind" arguments to request quick or full ahead/behind
reporting.
When "--no-ahead-behind" is given, the existing porcelain V2 line
"branch.ab +x -y" is replaced with a new "branch.ab +? -?" line.
This indicates that the branch and its upstream are or are not equal
without the expense of computing the full ahead/behind values.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 356ee4659b ("sequencer: try to commit without forking 'git
commit'", 2017-11-24) forgot to run the 'prepare-commit-msg' hook when
creating the commit. Fix this by writing the commit message to a
different file and running the hook. Using a different file means that
if the commit is cancelled the original message file is
unchanged. Also move the checks for an empty commit so the order
matches 'git commit'.
Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the custom calls to mru.[ch] with calls to list.h. This patch is
the final step in removing the mru API completely and inlining the logic.
This patch leads to significant code reduction and the mru API hence, is
not a useful abstraction anymore.
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git commit --fixup" did not allow "-m<message>" option to be used
at the same time; allow it to annotate resulting commit with more
text.
* ab/commit-m-with-fixup:
commit: add support for --fixup <commit> -m"<extra message>"
commit doc: document that -c, -C, -F and --fixup with -m error
"diff" family of commands learned "--find-object=<object-id>" option
to limit the findings to changes that involve the named object.
* sb/diff-blobfind-pickaxe:
diff: use HAS_MULTI_BITS instead of counting bits manually
diff: properly error out when combining multiple pickaxe options
diffcore: add a pickaxe option to find a specific blob
diff: introduce DIFF_PICKAXE_KINDS_MASK
diff: migrate diff_flags.pickaxe_ignore_case to a pickaxe_opts bit
diff.h: make pickaxe_opts an unsigned bit field
"git clone $there $here" is allowed even when here directory exists
as long as it is an empty directory, but the command incorrectly
removed it upon a failure of the operation.
* jk/abort-clone-with-existing-dest:
clone: do not clean up directories we didn't create
clone: factor out dir_exists() helper
t5600: modernize style
t5600: fix outdated comment about unborn HEAD
API clean-up around revision traversal.
* rs/lose-leak-pending:
commit: remove unused function clear_commit_marks_for_object_array()
revision: remove the unused flag leak_pending
checkout: avoid using the rev_info flag leak_pending
bundle: avoid using the rev_info flag leak_pending
bisect: avoid using the rev_info flag leak_pending
object: add clear_commit_marks_all()
ref-filter: use clear_commit_marks_many() in do_merge_filter()
commit: use clear_commit_marks_many() in remove_redundant()
commit: avoid allocation in clear_commit_marks_many()
"git status" after moving a path in the working tree (hence making
it appear "removed") and then adding with the -N option (hence
making that appear "added") detected it as a rename, but did not
report the old and new pathnames correctly.
* nd/ita-wt-renames-in-status:
wt-status.c: handle worktree renames
wt-status.c: rename rename-related fields in wt_status_change_data
wt-status.c: catch unhandled diff status codes
wt-status.c: coding style fix
Use DIFF_DETECT_RENAME for detect_rename assignments
t2203: test status output with porcelain v2 format
An old regression in "git describe --all $annotated_tag^0" has been
fixed.
* dk/describe-all-output-fix:
describe: prepend "tags/" when describing tags with embedded name
While fsck_walk/fsck_walk_tree/parse_tree populates "struct tree"
idempotently, it is still up to the fsck_walk caller to call
free_tree_buffer.
Fixes: ad2db4030e ("fsck: remove redundant parse_tree() invocation")
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
c4738aed ("worktree: add can be created from any commit-ish",
2017-11-26) taught "git worktree add" to start a new worktree
with an arbitrary commit-ish checked out, not limited to a tip
of a branch.
"git worktree --help" was updated to describe this, but we forgot to
update "git worktree -h".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call strbuf_add_unique_abbrev() to add an abbreviated hash to a strbuf
instead of taking a detour through find_unique_abbrev() and its static
buffer. This is shorter and a bit more efficient.
Patch generated by Coccinelle (and contrib/coccinelle/strbuf.cocci).
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No caller passes anything but "0" for this parameter, which
requests that the function ignore it completely. In fact, in
all of history there was only one such caller, and it went
away in 7f51f8bc2b (alias: use run_command api to execute
aliases, 2011-01-07).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The same mechanism is used even for porting this submodule
subcommand, as used in the ported subcommands till now.
The function cmd_deinit in split up after porting into four
functions: module_deinit(), for_each_listed_submodule(),
deinit_submodule() and deinit_submodule_cb().
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Port the submodule subcommand 'sync' from shell to C using the same
mechanism as that used for porting submodule subcommand 'status'.
Hence, here the function cmd_sync() is ported from shell to C.
This is done by introducing four functions: module_sync(),
sync_submodule(), sync_submodule_cb() and print_default_remote().
The function print_default_remote() is introduced for getting
the default remote as stdout.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge -s recursive" did not correctly abort when the index is
dirty, if the merged tree happened to be the same as the current
HEAD, which has been fixed.
* ew/empty-merge-with-dirty-index:
merge-recursive: avoid incorporating uncommitted changes in a merge
move index_has_changes() from builtin/am.c to merge.c for reuse
t6044: recursive can silently incorporate dirty changes in a merge
Currently the check whether to perform pickaxing is done via checking
`diffopt->pickaxe`, which contains the command line argument that we
want to pickaxe for. Soon we'll introduce a new type of pickaxing, that
will not store anything in the `.pickaxe` field, so let's migrate the
check to be dependent on pickaxe_opts.
It is not enough to just replace the check for pickaxe by pickaxe_opts,
because flags might be set, but pickaxing was not requested ('-i').
To cope with that, introduce a mask to check only for the bits indicating
the modes of operation.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, git-clone would refuse to write into a
directory that it did not itself create. The cleanup
routines for a failed clone could therefore just remove the
git and worktree dirs completely.
In 55892d2398 (Allow cloning to an existing empty directory,
2009-01-11), we learned to write into an existing directory.
Which means that doing:
mkdir foo
git clone will-fail foo
ends up deleting foo. This isn't a huge catastrophe, since
by definition foo must be empty. But it's somewhat
confusing; we should leave the filesystem as we found it.
Because we know that the only directory we'll write into is
an empty one, we can handle this case by just passing the
KEEP_TOPLEVEL flag to our recursive delete (if we could
write into populated directories, we'd have to keep track of
what we wrote and what we did not, which would be much
harder).
Note that we need to handle the work-tree and git-dir
separately, though, as only one might exist (and the new
tests in t5600 cover all cases).
Reported-by: Stephan Janssen <sjanssen@you-get.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two parts of git-clone's setup logic check whether a
directory exists, and they both call stat directly with the
same scratch "struct stat" buffer. Let's pull that into a
helper, which has a few advantages:
- it makes the purpose of the stat calls more obvious
- it makes it clear that we don't care about the
information in "buf" remaining valid
- if we later decide to make the check more robust (e.g.,
complaining about non-directories), we can do it in one
place
Note that we could just use file_exists() for this, which
has identical code. But we specifically care about
directories, so this future-proofs us against that function
later getting more picky about seeing actual files.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git describe" was taught to dig trees deeper to find a
<commit-ish>:<path> that refers to a given blob object.
* sb/describe-blob:
builtin/describe.c: describe a blob
builtin/describe.c: factor out describe_commit
builtin/describe.c: print debug statements earlier
builtin/describe.c: rename `oid` to avoid variable shadowing
revision.h: introduce blob/tree walking in order of the commits
list-objects.c: factor out traverse_trees_and_blobs
t6120: fix typo in test name
"git merge" learned to pay attention to merge.verifySignatures
configuration variable and pretend as if '--verify-signatures'
option was given from the command line.
* hi/merge-verify-sig-config:
t5573, t7612: clean up after unexpected success of 'pull' and 'merge'
t: add tests for pull --verify-signatures
merge: add config option for verifySignatures
Introduce a helper to simplify code to parse a common pattern that
expects either "--key" or "--key=<something>".
* cc/skip-to-optional-val:
t4045: reindent to make helpers readable
diff: add tests for --relative without optional prefix value
diff: use skip_to_optional_arg_default() in parsing --relative
diff: use skip_to_optional_arg_default()
diff: use skip_to_optional_arg()
index-pack: use skip_to_optional_arg()
git-compat-util: introduce skip_to_optional_arg()
The leak_pending flag is so awkward to use that multiple comments had to
be added around each occurrence. We only use it for remembering the
commits whose marks we have to clear after checking if the old HEAD is
detached. This is easy, though: We need to do that for the old commit,
the new one -- and for all refs.
Don't bother tracking exactly which commits need their flags cleared,
just nuke all we have in-core. This change is safe because refs can
point at anything, so other program parts can't depend on any kept flags
anyway. And since all refs are loaded we have to basically deal with
all commits anyway, so performance should not be negatively impacted.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This field can have two values (2 for copy). Use this name instead for
clarity. Many places have already used this constant.
Note, the detect_rename assignments in merge-recursive.c remain
unchanged because it's actually a boolean there.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* bw/submodule-sans-cache-compat:
submodule: convert get_next_submodule to not rely on the_index
submodule: used correct index in is_staging_gitmodules_ok
submodule: convert stage_updated_gitmodules to take a struct index_state
"git clone --shared" to borrow from a (secondary) worktree did not
work, even though "git clone --local" did. Both are now accepted.
* es/clone-shared-worktree:
clone: support 'clone --shared' from a worktree
A few structures and variables that are implementation details of
the decorate API have been renamed and then the API got documented
better.
* jt/decorate-api:
decorate: clean up and document API
Code clean-up.
* ks/branch-cleanup:
builtin/branch: strip refs/heads/ using skip_prefix
branch: update warning message shown when copying a misnamed branch
branch: group related arguments of create_branch()
branch: improve documentation and naming of create_branch() parameters
"git worktree add" learned to run the post-checkout hook, just like
"git checkout" does, after the initial checkout.
* es/worktree-checkout-hook:
worktree: invoke post-checkout hook (unless --no-checkout)
With a configuration variable rebase.abbreviateCommands set,
"git rebase -i" produces the todo list with a single-letter
command names.
* lb/rebase-i-short-command-names:
sequencer.c: drop 'const' from function return type
t3404: add test case for abbreviated commands
rebase -i: learn to abbreviate command names
rebase -i -x: add exec commands via the rebase--helper
rebase -i: update functions to use a flags parameter
rebase -i: replace reference to sha1 with oid
rebase -i: refactor transform_todo_ids
rebase -i: set commit to null in exec commands
Documentation: use preferred name for the 'todo list' script
Documentation: move rebase.* configs to new file
In preparation for implementing narrow/partial clone, the object
walking machinery has been taught a way to tell it to "filter" some
objects from enumeration.
* jh/object-filtering:
rev-list: support --no-filter argument
list-objects-filter-options: support --no-filter
list-objects-filter-options: fix 'keword' typo in comment
pack-objects: add list-objects filtering
rev-list: add list-objects filtering support
list-objects: filter objects in traverse_commit_list
oidset: add iterator methods to oidset
oidmap: add oidmap iterator methods
dir: allow exclusions from blob in addition to file
The man page of the "git describe" command explains the expected
output when using the --all option, i.e. the full reference path is
shown, including heads/ or tags/ prefix.
When 212945d4a8 ("Teach git-describe
to verify annotated tag names before output") made Git favor the
embedded name of annotated tags, it accidentally changed the output
format when the --all flag is given, only printing the tag's name
without the prefix.
Check if --all was specified and re-add the "tags/" prefix for this
special case to fix the regresssion.
Signed-off-by: Daniel Knittl-Frank <knittl89+git@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for supplying the -m option with --fixup. Doing so has
errored out ever since --fixup was introduced. Before this, the only
way to amend the fixup message while committing was to use --edit and
amend it in the editor.
The use-case for this feature is one of:
* Leaving a quick note to self when creating a --fixup commit when
it's not self-evident why the commit should be squashed without a
note into another one.
* (Ab)using the --fixup feature to "fix up" commits that have already
been pushed to a branch that doesn't allow non-fast-forwards,
i.e. just noting "this should have been part of that other commit",
and if the history ever got rewritten in the future the two should
be combined.
In such a case you might want to leave a small message,
e.g. "forgot this part, which broke XYZ".
With this, --fixup <commit> -m"More" -m"Details" will result in a
commit message like:
!fixup <subject of <commit>>
More
Details
The reason the test being added here seems to squash "More" at the end
of the subject line of the commit being fixed up is because the test
code is using "%s%b" so the body immediately follows the subject, it's
not a bug in this code, and other tests t7500-commit.sh do the same
thing.
When the --fixup option was initially added the "Option -m cannot be
combined" error was expanded from -c, -C and -F to also include
--fixup[1]
Those options could also support combining with -m, but given what
they do I can't think of a good use-case for doing that, so I have not
made the more invasive change of splitting up the logic in commit.c to
first act on those, and then on -m options.
1. d71b8ba7c9 ("commit: --fixup option for use with rebase
--autosquash", 2010-11-02)
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ew/empty-merge-with-dirty-index-maint:
merge-recursive: avoid incorporating uncommitted changes in a merge
move index_has_changes() from builtin/am.c to merge.c for reuse
t6044: recursive can silently incorporate dirty changes in a merge
index_has_changes() is a function we want to reuse outside of just am,
making it also available for merge-recursive and merge-ort.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ancient part of codebase still shows dots after an abbreviated
object name just to show that it is not a full object name, but
these ellipses are confusing to people who newly discovered Git
who are used to seeing abbreviated object names and find them
confusing with the range syntax.
* ar/unconfuse-three-dots:
t2020: test variations that matter
t4013: test new output from diff --abbrev --raw
diff: diff_aligned_abbrev: remove ellipsis after abbreviated SHA-1 value
t4013: prepare for upcoming "diff --raw --abbrev" output format change
checkout: describe_detached_head: remove ellipsis after committish
print_sha1_ellipsis: introduce helper
Documentation: user-manual: limit usage of ellipsis
Documentation: revisions: fix typo: "three dot" ---> "three-dot" (in line with "two-dot").
The way "git worktree add" determines what branch to create from
where and checkout in the new worktree has been updated a bit.
* tg/worktree-create-tracking:
add worktree.guessRemote config option
worktree: add --guess-remote flag to add subcommand
worktree: make add <path> <branch> dwim
worktree: add --[no-]track option to the add subcommand
worktree: add can be created from any commit-ish
checkout: factor out functions to new lib file
Recent update to the submodule configuration code broke "diff-tree"
by accidentally stopping to read from the index upfront.
* bw/submodule-config-cleanup:
diff-tree: read the index so attribute checks work in bare repositories
An v2.12-era regression in pathspec match logic, which made it look
into submodule tree even when it is not desired, has been fixed.
* bw/pathspec-match-submodule-boundary:
pathspec: only match across submodule boundaries when requested
Sometimes users are given a hash of an object and they want to
identify it further (ex.: Use verify-pack to find the largest blobs,
but what are these? or [1])
When describing commits, we try to anchor them to tags or refs, as these
are conceptually on a higher level than the commit. And if there is no ref
or tag that matches exactly, we're out of luck. So we employ a heuristic
to make up a name for the commit. These names are ambiguous, there might
be different tags or refs to anchor to, and there might be different
path in the DAG to travel to arrive at the commit precisely.
When describing a blob, we want to describe the blob from a higher layer
as well, which is a tuple of (commit, deep/path) as the tree objects
involved are rather uninteresting. The same blob can be referenced by
multiple commits, so how we decide which commit to use? This patch
implements a rather naive approach on this: As there are no back pointers
from blobs to commits in which the blob occurs, we'll start walking from
any tips available, listing the blobs in-order of the commit and once we
found the blob, we'll take the first commit that listed the blob. For
example
git describe --tags v0.99:Makefile
conversion-901-g7672db20c2:Makefile
tells us the Makefile as it was in v0.99 was introduced in commit 7672db20.
The walking is performed in reverse order to show the introduction of a
blob rather than its last occurrence.
[1] https://stackoverflow.com/questions/223678/which-commit-has-this-blob
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to commit a2d725b7bd ("Use an external program to implement
fetching with curl", 2009-08-05), if Git was compiled with NO_CURL, the
get_refs_list and fetch methods in struct transport might not be
populated, hence the checks in clone and fetch. After that commit, all
transports populate get_refs_list and fetch, making the checks in clone
and fetch redundant. Remove those checks.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tagnames "git log --decorate" uses to annotate the commits can
now be limited to subset of available refs with the two additional
options, --decorate-refs[-exclude]=<pattern>.
* ra/decorate-limit-refs:
log: add option to choose which refs to decorate
An infrastructure to define what hash function is used in Git is
introduced, and an effort to plumb that throughout various
codepaths has been started.
* bc/hash-algo:
repository: fix a sparse 'using integer as NULL pointer' warning
Switch empty tree and blob lookups to use hash abstraction
Integrate hash algorithm support with repo setup
Add structure representing hash algorithm
setup: expose enumerated repo info
The previous config handling relied on global variables, called
git_default_config() even when the key had already been handled by
git_sequencer_config() and did not initialize the diff configuration
variables. Improve this by: i) loading the default values for message
cleanup and gpg signing of commits into struct replay_opts;
ii) restructuring the code to return immediately once a key is
handled; and iii) calling git_diff_basic_config(). Note that
unfortunately it is not possible to return early if the key is handled
by git_gpg_config() as it does not indicate to the caller if the key
has been handled or not.
The sequencer should probably have been calling
git_diff_basic_config() before as it creates a patch when there are
conflicts. The shell version uses 'diff-tree' to create the patch so
calling git_diff_basic_config() should match that. Although 'git
commit' calls git_diff_ui_config() I don't think the output of
print_commit_summary() is affected by anything that is loaded by that
as print_commit_summary() always turns on rename detection so would
ignore the value in the user's configuration anyway. The other values
loaded by git_diff_ui_config() are about the formatting of patches so
are not relevant to print_commit_summary().
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of implicitly relying on the global 'the_index', convert
'get_next_submodule()' to use the index of the repository stored in the
callback data 'struct submodule_parallel_fetch'.
Since this removes the last user of the index compatibility macros,
define 'NO_THE_INDEX_COMPATIBILITY_MACROS' to prevent future users of
these macros in submodule.c.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git merge --verify-signatures can be used to verify that the tip commit
of the branch being merged in is properly signed, but it's cumbersome to
have to specify that every time.
Add a configuration option that enables this behaviour by default, which
can be overridden by --no-verify-signatures.
Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create header for pretty.c to make formatting interface more structured.
This is a middle point, this file would be merged further with other
files which contain formatting stuff.
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's simplify index-pack option parsing using
skip_to_optional_arg().
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When worktree functionality was originally implemented, the possibility
of 'clone --local' from within a worktree was overlooked, with the
result that the location of the "objects" directory of the source
repository was computed incorrectly, thus the objects could not be
copied or hard-linked by the clone. This shortcoming was addressed by
744e469755 (clone: allow --local from a linked checkout, 2015-09-28).
However, the related case of 'clone --shared' (despite being handled
only a few lines away from the 'clone --local' case) was not fixed by
744e469755, with a similar result of the "objects" directory location
being incorrectly computed for insertion into the 'alternates' file.
Fix this.
Reported-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach (partial) fetch to inherit the filter-spec used by
the partial clone. Extend --no-filter to override this
inheritance.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fetch to support filters. This is only allowed for the remote
configured in extensions.partialcloneremote.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Separate out the calculation of remotes to be fetched from and the
actual fetching. This will allow us to include an additional step before
the actual fetching in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixup fetch-pack to accept --no-filter to be consistent with
rev-list and pack-objects.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach gc to stop traversal at promisor objects, and to leave promisor
packfiles alone. This has the effect of only repacking non-promisor
packfiles, and preserves the distinction between promisor packfiles and
non-promisor packfiles.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach rev-list to support termination of an object traversal at any
object from a promisor remote (whether one that the local repo also has,
or one that the local repo knows about because it has another promisor
object that references it).
This will be used subsequently in gc and in the connectivity check used
by fetch.
For efficiency, if an object is referenced by a promisor object, and is
in the local repo only as a non-promisor object, object traversal will
not stop there. This is to avoid building the list of promisor object
references.
(In list-objects.c, the case where obj is NULL in process_blob() and
process_tree() do not need to be changed because those happen only when
there is a conflict between the expected type and the existing object.
If the object doesn't exist, an object will be synthesized, which is
fine.)
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach sha1_file to fetch objects from the remote configured in
extensions.partialclone whenever an object is requested but missing.
The fetching of objects can be suppressed through a global variable.
This is used by fsck and index-pack.
However, by default, such fetching is not suppressed. This is meant as a
temporary measure to ensure that all Git commands work in such a
situation. Future patches will update some commands to either tolerate
missing objects (without fetching them) or be more efficient in fetching
them.
In order to determine the code changes in sha1_file.c necessary, I
investigated the following:
(1) functions in sha1_file.c that take in a hash, without the user
regarding how the object is stored (loose or packed)
(2) functions in packfile.c (because I need to check callers that know
about the loose/packed distinction and operate on both differently,
and ensure that they can handle the concept of objects that are
neither loose nor packed)
(1) is handled by the modification to sha1_object_info_extended().
For (2), I looked at for_each_packed_object and others. For
for_each_packed_object, the callers either already work or are fixed in
this patch:
- reachable - only to find recent objects
- builtin/fsck - already knows about missing objects
- builtin/cat-file - warning message added in this commit
Callers of the other functions do not need to be changed:
- parse_pack_index
- http - indirectly from http_get_info_packs
- find_pack_entry_one
- this searches a single pack that is provided as an argument; the
caller already knows (through other means) that the sought object
is in a specific pack
- find_sha1_pack
- fast-import - appears to be an optimization to not store a file if
it is already in a pack
- http-walker - to search through a struct alt_base
- http-push - to search through remote packs
- has_sha1_pack
- builtin/fsck - already knows about promisor objects
- builtin/count-objects - informational purposes only (check if loose
object is also packed)
- builtin/prune-packed - check if object to be pruned is packed (if
not, don't prune it)
- revision - used to exclude packed objects if requested by user
- diff - just for optimization
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the names of the identifiers in decorate.h, document them, and
add an example of how to use these functions.
The example is compiled and run as part of the test suite.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of hard-coding the offset strlen("refs/heads/") to skip
the prefix "refs/heads/" use the skip_prefix() function which
is more communicative and verifies that the string actually
starts with that prefix.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user tries to rename a branch that has a "bad name" (e.g.,
starts with a '-') then we warn them that the misnamed branch has
been renamed "away". A similar message is shown when trying to create
a copy of a misnamed branch even though it doesn't remove the misnamed
branch. This is not correct and may confuse the user.
So, update the warning message shown to be more precise that only a copy
of the misnamed branch has been created. It's better to show the warning
message than not showing it at all as it makes the user aware of the
presence of a misnamed branch.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
39bd6f726 (Allow checkout -B <current-branch> to update the current
branch, 2011-11-26) added 'clobber_head' (now, 'clobber_head_ok')
"before" 'track' as 'track' was closely related 'clobber_head' for
the purpose the commit wanted to achieve. Looking from the perspective
of how the arguments are used it turns out that 'clobber_head' is
more related to 'force' than it is to 'track'.
So, re-order the arguments to keep the related arguments close
to each other.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-clone and git-checkout both invoke the post-checkout hook following
a successful checkout, yet git-worktree neglects to do so even though it
too "checks out" the worktree. Fix this oversight.
Implementation note: The newly-created worktree may reference a branch
or be detached. In the latter case, a commit lookup is performed, though
the result is used only in a boolean sense to (a) determine if the
commit actually exists, and (b) assign either the branch name or commit
ID to HEAD. Since the post-commit hook needs to know the ID of the
checked-out commit, the lookup now needs to be done in all cases, rather
than only when detached. Consequently, a new boolean is needed to handle
(b) since the lookup result itself can no longer perform that role.
Reported-by: Matthew K Gumbel <matthew.k.gumbel@intel.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use string_list_append_nodup() instead of string_list_append() to hand
over ownership of a detached strbuf and thus avoid leaking its memory.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A regression was introduced in 557a5998d (submodule: remove
gitmodules_config, 2017-08-03) to how attribute processing was handled
in bare repositories when running the diff-tree command.
By default the attribute system will first try to read ".gitattribute"
files from the working tree and then falls back to reading them from the
index if there isn't a copy checked out in the worktree. Prior to
557a5998d the index was read as a side effect of the call to
'gitmodules_config()' which ensured that the index was already populated
before entering the attribute subsystem.
Since the call to 'gitmodules_config()' was removed the index is no
longer being read so when the attribute system tries to read from the
in-memory index it doesn't find any ".gitattribute" entries effectively
ignoring any configured attributes.
Fix this by explicitly reading the index during the setup of diff-tree.
Reported-by: Ben Boeckel <ben.boeckel@kitware.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users might want to have the --guess-remote option introduced in
the previous commit on by default, so they don't have to type it out
every time they create a new worktree.
Add a config option worktree.guessRemote that allows users to configure
the default behaviour for themselves.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently 'git worktree add <path>' creates a new branch named after the
basename of the <path>, that matches the HEAD of whichever worktree we
were on when calling "git worktree add <path>".
It's sometimes useful to have 'git worktree add <path> behave more like
the dwim machinery in 'git checkout <new-branch>', i.e. check if the new
branch name, derived from the basename of the <path>, uniquely matches
the branch name of a remote-tracking branch, and if so check out that
branch and set the upstream to the remote-tracking branch.
Add a new --guess-remote option that enables exactly that behaviour.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new mechanism to upgrade the wire protocol in place is proposed
and demonstrated that it works with the older versions of Git
without harming them.
* bw/protocol-v1:
Documentation: document Extra Parameters
ssh: introduce a 'simple' ssh variant
i5700: add interop test for protocol transition
http: tell server that the client understands v1
connect: tell server that the client understands v1
connect: teach client to recognize v1 server response
upload-pack, receive-pack: introduce protocol version 1
daemon: recognize hidden request arguments
protocol: introduce protocol extension mechanisms
pkt-line: add packet_write function
connect: in ref advertisement, shallows are last
"git config --expiry-date gc.reflogexpire" can read "2.weeks" from
the configuration and report it as a timestamp, just like "--int"
would read "1k" and report 1024, to help consumption by scripts.
* hm/config-parse-expiry-date:
config: add --expiry-date
"git notes" sent its error message to its standard output stream,
which was corrected.
* tz/notes-error-to-stderr:
notes: send "Automatic notes merge failed" messages to stderr
Contrary to the documentation, "git pull -4/-6 other-args" did not
ask the underlying "git fetch" to go over IPv4/IPv6, which has been
corrected.
* sw/pull-ipv46-passthru:
pull: pass -4/-6 option to 'git fetch'
We do not want an ellipsis displayed following an (abbreviated) SHA-1
value.
The days when this was necessary to indicate the truncation to
lower-level Git commands and/or the user are bygone.
However, to ease the transition, the ellipsis will still be printed if
the user sets the environment variable GIT_PRINT_SHA1_ELLIPSIS to "yes".
Correct documentation with respect to what describe_detached_head prints
when GIT_PRINT_SHA1_ELLIPSIS is not set as indicated above.
Add tests for the old and new behaviour.
Signed-off-by: Ann T Ropea <bedhanger@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git rebase -i` already know how to interpret single-letter command
names. Teach it to generate the todo list with these same abbreviated
names.
Based-on-patch-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent work on `git-rebase--interactive` aims to convert shell code to
C. Even if this is most likely not a big performance enhancement, let's
convert it too since a coming change to abbreviate command names
requires it to be updated.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update functions used in the rebase--helper so that they take a generic
'flags' parameter instead of a growing list of options.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we are trying to abstract the hash function name elsewhere in the
code base, lets use OID instead of SHA-1 in the rebase--helper too.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The transform_todo_ids function is a little hard to read. Lets try
to make it easier by using more of the strbuf API. Also, since we'll
soon be adding command abbreviations, let's rename the function so
it's name reflects that change.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce fetch-object, providing the ability to fetch one object from a
promisor remote.
This uses fetch-pack. To do this, the transport mechanism has been
updated with 2 flags, "from-promisor" to indicate that the resulting
pack comes from a promisor remote (and thus should be annotated as such
by index-pack), and "no-dependents" to indicate that only the objects
themselves need to be fetched (but fetching additional objects is
nevertheless safe).
Whenever "no-dependents" is used, fetch-pack will refrain from using any
object flags, because it is most likely invoked as part of a dynamic
object fetch by another Git command (which may itself use object flags).
An alternative to this is to leave fetch-pack alone, and instead update
the allocation of flags so that fetch-pack's flags never overlap with
any others, but this will end up shrinking the number of flags available
to nearly every other Git command (that is, every Git command that
accesses objects), so the approach in this commit was used instead.
This will be tested in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a subsequent commit, index-pack will be taught to write ".promisor"
files which are similar to the ".keep" files it knows how to write.
Refactor the writing of ".keep" files, so that the implementation of
writing ".promisor" files becomes easier.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fsck to not treat missing promisor objects provided on the CLI as
an error when extensions.partialclone is set.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fsck to not treat missing promisor objects indirectly pointed to
by refs as an error when extensions.partialclone is set.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fsck to not treat refs referring to missing promisor objects as an
error when extensions.partialclone is set.
For the purposes of warning about no default refs, such refs are still
treated as legitimate refs.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, Git does not support repos with very large numbers of objects
or repos that wish to minimize manipulation of certain blobs (for
example, because they are very large) very well, even if the user
operates mostly on part of the repo, because Git is designed on the
assumption that every referenced object is available somewhere in the
repo storage. In such an arrangement, the full set of objects is usually
available in remote storage, ready to be lazily downloaded.
Teach fsck about the new state of affairs. In this commit, teach fsck
that missing promisor objects referenced from the reflog are not an
error case; in future commits, fsck will be taught about other cases.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach rev-list to support --no-filter to override a
previous --filter=<filter_spec> argument. This is
to be consistent with commands that use OPT_PARSE
macros.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 74ed43711f (grep: enable recurse-submodules to work on <tree>
objects, 2016-12-16) taught 'tree_entry_interesting()' to be able to
match across submodule boundaries in the presence of wildcards. This is
done by performing literal matching up to the first wildcard and then
punting to the submodule itself to perform more accurate pattern
matching. Instead of introducing a new flag to request this behavior,
commit 74ed43711f overloaded the already existing 'recursive' flag in
'struct pathspec' to request this behavior.
This leads to a bug where whenever any other caller has the 'recursive'
flag set as well as a pathspec with wildcards that all submodules will
be indicated as matches. One simple example of this is:
git init repo
cd repo
git init submodule
git -C submodule commit -m initial --allow-empty
touch "[bracket]"
git add "[bracket]"
git commit -m bracket
git add submodule
git commit -m submodule
git rev-list HEAD -- "[bracket]"
Fix this by introducing the new flag 'recurse_submodules' in 'struct
pathspec' and using this flag to determine if matches should be allowed
to cross submodule boundaries.
This fixes https://github.com/git-for-windows/git/issues/1371.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch --list" learned to show its output through the pager by
default when the output is going to a terminal, which is controlled
by the pager.branch configuration variable. This is similar to a
recent change to "git tag --list".
* ma/branch-list-paginate:
branch: change default of `pager.branch` to "on"
branch: respect `pager.branch` in list-mode only
t7006: add tests for how git branch paginates
"git branch" and "git checkout -b" are now forbidden from creating
a branch whose name is "HEAD".
* jc/branch-name-sanity:
builtin/branch: remove redundant check for HEAD
branch: correctly reject refs/heads/{-dash,HEAD}
branch: split validate_new_branchname() into two
branch: streamline "attr_only" handling in validate_new_branchname()
Contrary to the documentation, "git pull -4/-6 other-args" did not
ask the underlying "git fetch" to go over IPv4/IPv6, which has been
corrected.
* sw/pull-ipv46-passthru:
pull: pass -4/-6 option to 'git fetch'
"git add --renormalize ." is a new and safer way to record the fact
that you are correcting the end-of-line convention and other
"convert_to_git()" glitches in the in-repository data.
* tb/add-renormalize:
add: introduce "--renormalize"
"git notes" sent its error message to its standard output stream,
which was corrected.
* tz/notes-error-to-stderr:
notes: send "Automatic notes merge failed" messages to stderr
Leak fixes.
* ma/bisect-leakfix:
bisect: fix memory leak when returning best element
bisect: fix off-by-one error in `best_bisection_sorted()`
bisect: fix memory leak in `find_bisection()`
bisect: change calling-convention of `find_bisection()`
Currently 'git worktree add <path> <branch>', errors out when 'branch'
is not a local branch. It has no additional dwim'ing features that one
might expect.
Make it behave more like 'git checkout <branch>' when the branch doesn't
exist locally, but a remote tracking branch uniquely matches the desired
branch name, i.e. create a new branch from the remote tracking branch
and set the upstream to the remote tracking branch.
As 'git worktree add' currently just dies in this situation, there are
no backwards compatibility worries when introducing this feature.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently 'git worktree add' sets up tracking branches if '<branch>' is
a remote tracking branch, and doesn't set them up otherwise, as is the
default for 'git branch'.
This may or may not be what the user wants. Allow overriding this
behaviour with a --[no-]track flag that gets passed through to 'git
branch'.
We already respect branch.autoSetupMerge, as 'git worktree' just calls
'git branch' internally.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor the functions out, so they can be re-used from other places. In
particular these functions will be re-used in builtin/worktree.c to make
git worktree add dwim more.
While there add some docs to the function.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The message spans over 2 lines but the C concatenation does not add
the needed space between the two lines.
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Load default values for message cleanup and gpg signing of commits in
preparation for committing without forking 'git commit'. Note that we
interpret commit.cleanup=scissors to mean COMMIT_MSG_CLEANUP_SPACE to
be consistent with 'git commit'
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move print_commit_summary() from builtin/commit.c to sequencer.c so it
can be shared with other commands. The function is modified by
changing the last argument to a flag so callers can specify whether
they want to show the author date in addition to specifying if this is
an initial commit.
If the sequencer dies in print_commit_summary() (which can only happen
when cherry-picking or reverting) then neither the todo list nor the
abort safety file are updated to reflect the commit that was just
made. print_commit_summary() can die if:
- The commit that was just created cannot be found or parsed.
- HEAD cannot be resolved either because some other process is
updating it (which is bad news in the middle of a cherry-pick) or
because it is corrupt.
- log_tree_commit() cannot read some objects.
In all those cases dying will leave the sequencer in a sane state for
aborting; 'git cherry-pick --abort' will rewind HEAD to the last
successful commit before there was a problem with HEAD or the object
database. If the user somehow fixes the problem and runs 'git
cherry-pick --continue' then the sequencer will try and pick the same
commit again which may or may not be what the user wants depending on
what caused print_commit_summary() to die. If print_commit_summary()
returned an error instead then update_abort_safety_file() would try to
resolve HEAD which may or may not be successful. If it is successful
then running 'git rebase --abort' would not rewind HEAD to the last
successful commit which is not what we want.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach pack-objects to use the filtering provided by the
traverse_commit_list_filtered() interface to omit unwanted
objects from the resulting packfile.
Filtering requires the use of the "--stdout" option.
Add t5317 test.
In the future, we will introduce a "partial clone" mechanism
wherein an object in a repo, obtained from a remote, may
reference a missing object that can be dynamically fetched from
that remote once needed. This "partial clone" mechanism will
have a way, sometimes slow, of determining if a missing link
is one of the links expected to be produced by this mechanism.
This patch introduces handling of missing objects to help
debugging and development of the "partial clone" mechanism,
and once the mechanism is implemented, for a power user to
perform operations that are missing-object aware without
incurring the cost of checking if a missing link is expected.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach rev-list to use the filtering provided by the
traverse_commit_list_filtered() interface to omit
unwanted objects from the result.
Object filtering is only allowed when one of the "--objects*"
options are used.
When the "--filter-print-omitted" option is used, the omitted
objects are printed at the end. These are marked with a "~".
This option can be combined with "--quiet" to get a list of
just the omitted objects.
Add t6112 test.
In the future, we will introduce a "partial clone" mechanism
wherein an object in a repo, obtained from a remote, may
reference a missing object that can be dynamically fetched from
that remote once needed. This "partial clone" mechanism will
have a way, sometimes slow, of determining if a missing link
is one of the links expected to be produced by this mechanism.
This patch introduces handling of missing objects to help
debugging and development of the "partial clone" mechanism,
and once the mechanism is implemented, for a power user to
perform operations that are missing-object aware without
incurring the cost of checking if a missing link is expected.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `log --decorate` is used, git will decorate commits with all
available refs. While in most cases this may give the desired effect,
under some conditions it can lead to excessively verbose output.
Introduce two command line options, `--decorate-refs=<pattern>` and
`--decorate-refs-exclude=<pattern>` to allow the user to select which
refs are used in decoration.
When "--decorate-refs=<pattern>" is given, only the refs that match the
pattern are used in decoration. The refs that match the pattern when
"--decorate-refs-exclude=<pattern>" is given, are never used in
decoration.
These options follow the same convention for mixing negative and
positive patterns across the system, assuming that the inclusive default
is to match all refs available.
(1) if there is no positive pattern given, pretend as if an
inclusive default positive pattern was given;
(2) for each candidate, reject it if it matches no positive
pattern, or if it matches any one of the negative patterns.
The rules for what is considered a match are slightly different from the
rules used elsewhere.
Commands like `log --glob` assume a trailing '/*' when glob chars are
not present in the pattern. This makes it difficult to specify a single
ref. On the other hand, commands like `describe --match --all` allow
specifying exact refs, but do not have the convenience of allowing
"shorthand refs" like 'refs/heads' or 'heads' to refer to
'refs/heads/*'.
The commands introduced in this patch consider a match if:
(a) the pattern contains globs chars,
and regular pattern matching returns a match.
(b) the pattern does not contain glob chars,
and ref '<pattern>' exists, or if ref exists under '<pattern>/'
This allows both behaviours (allowing single refs and shorthand refs)
yet remaining compatible with existent commands.
Helped-by: Kevin Daudt <me@ikke.info>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, 'git notes prune' in man page and usage message
incorrectly lists options as '[-n | -v]', rather than '[-n] [-v]'.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add mention of git prune's "--progress" option to the SYNOPSIS and
DESCRIPTION sections of the man page, and to the usage message of "git
prune" itself.
While we're here, move the explanation of "--" toward the end of the
DESCRIPTION section, where it belongs.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We learned to talk to watchman to speed up "git status" and other
operations that need to see which paths have been modified.
* bp/fsmonitor:
fsmonitor: preserve utf8 filenames in fsmonitor-watchman log
fsmonitor: read entirety of watchman output
fsmonitor: MINGW support for watchman integration
fsmonitor: add a performance test
fsmonitor: add a sample integration script for Watchman
fsmonitor: add test cases for fsmonitor extension
split-index: disable the fsmonitor extension when running the split index test
fsmonitor: add a test tool to dump the index extension
update-index: add fsmonitor support to update-index
ls-files: Add support in ls-files to display the fsmonitor valid bit
fsmonitor: add documentation for the fsmonitor extension.
fsmonitor: teach git to optionally utilize a file system monitor to speed up detecting new or changed files.
update-index: add a new --force-write-index option
preload-index: add override to enable testing preload-index
bswap: add 64 bit endianness helper get_be64
The -4/-6 option should be passed through to 'git fetch' to be
consistent with the man page.
Signed-off-by: Wei Shuyu <wsy@dogben.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is similar to ff1e72483 (tag: change default of `pager.tag` to
"on", 2017-08-02) and is safe now that we do not consider `pager.branch`
at all when we are not listing branches. This change will help with
listing many branches, but will not hurt users of `git branch
--edit-description` as it would have before the previous commit.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
