A new configuration variable core.hooksPath allows customizing
where the hook directory is.
* ab/hooks:
hooks: allow customizing where the hook directory is
githooks.txt: minor improvements to the grammar & phrasing
githooks.txt: amend dangerous advice about 'update' hook ACL
githooks.txt: improve the intro section
"git commit-tree" plumbing command required the user to always sign
its result when the user sets the commit.gpgsign configuration
variable, which was an ancient mistake. Rework "git rebase" that
relied on this mistake so that it reads commit.gpgsign and pass (or
not pass) the -S option to "git commit-tree" to keep the end-user
expectation the same, while teaching "git commit-tree" to ignore
the configuration variable. This will stop requiring the users to
sign commit objects used internally as an implementation detail of
"git stash".
* jc/commit-tree-ignore-commit-gpgsign:
commit-tree: do not pay attention to commit.gpgsign
HTTP transport clients learned to throw extra HTTP headers at the
server, specified via http.extraHeader configuration variable.
* js/http-custom-headers:
http: support sending custom HTTP headers
Change the hardcoded lookup for .git/hooks/* to optionally lookup in
$(git config core.hooksPath)/* instead.
This is essentially a more intrusive version of the git-init ability to
specify hooks on init time via init templates.
The difference between that facility and this feature is that this can
be set up after the fact via e.g. ~/.gitconfig or /etc/gitconfig to
apply for all your personal repositories, or all repositories on the
system.
I plan on using this on a centralized Git server where users can create
arbitrary repositories under /gitroot, but I'd like to manage all the
hooks that should be run centrally via a unified dispatch mechanism.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change:
* Sentences that needed "the" or "a" to either add those or change them
so they don't need them.
* The little tangent about "You can use this to do X (if your project
wants to do X)" can just be shortened to "if you want to do X".
* s/parameter/parameters/ when the plural made more sense.
Most of this goes all the way back to the initial introduction of
hooks.txt in 6d35cc76 (Document hooks., 2005-09-02).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Any ACL you implement via an 'update' hook isn't actual access control
if the user has login access to the machine running git, because they
can trivially just build their own version of Git which doesn't run the
hook.
Change the documentation to take this dangerous edge case into account,
and remove the mention of the advice originating on the mailing list,
the users reading this don't care where the idea came up.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the documentation so that:
* We don't talk about "little scripts". Hooks can be as big as you
want, and don't have to be scripts, just call them "programs".
* We note that we change the working directory before a hook is called,
nothing documented this explicitly, but the current behavior is
predictable. It helps a lot to know what directory these hooks will
be executed from.
* We don't make claims about the example hooks which may not be true
depending on the configuration of 'init.templateDir'. Clarify that
we're talking about the default settings of git-init in those cases,
and move some of this documentation into git-init's documentation
about the default templates.
* We briefly note in the intro that hooks can get their arguments in
various different ways, and that how exactly is described below for
each hook.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ba3c69a9 (commit: teach --gpg-sign option, 2011-10-05) introduced a
"signed commit" by teaching the --[no]-gpg-sign option and the
commit.gpgsign configuration variable to various commands that
create commits.
Teaching these to "git commit" and "git merge", both of which are
end-user facing Porcelain commands, was perfectly fine. Allowing
the plumbing "git commit-tree" to suddenly change the behaviour to
surprise the scripts by paying attention to commit.gpgsign was not.
Among the in-tree scripts, filter-branch, quiltimport, rebase and
stash are the commands that run "commit-tree". If any of these
wants to allow users to always sign every single commit, they should
offer their own configuration (e.g. "filterBranch.gpgsign") with an
option to disable signing (e.g. "git filter-branch --no-gpgsign").
Ignoring commit.gpgsign option _obviously_ breaks the backward
compatibility, but it is easy to follow the standard pattern in
scripts to honor whatever configuration variable they choose to
follow. E.g.
case $(git config --bool commit.gpgsign) in
true) sign=-S ;;
*) sign= ;;
esac &&
git commit-tree $sign ...whatever other args...
Do so to make sure that "git rebase" keeps paying attention to the
configuration variable, which unfortunately is a documented mistake.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch --help" showed `-s` and `--no-patch` as if these
are valid options to the command. We already hide `--patch` option
from the documentation, because format-patch is about showing the
diff, and the documentation now hides these options as well.
* es/format-patch-doc-hide-no-patch:
git-format-patch.txt: don't show -s as shorthand for multiple options
The repository set-up sequence has been streamlined (the biggest
change is that there is no longer git_config_early()), so that we
do not attempt to look into refs/* when we know we do not have a
Git repository.
* jk/check-repository-format:
verify_repository_format: mark messages for translation
setup: drop repository_format_version global
setup: unify repository version callbacks
init: use setup.c's repo version verification
setup: refactor repo format reading and verification
config: drop git_config_early
check_repository_format_gently: stop using git_config_early
lazily load core.sharedrepository
wrap shared_repository global in get/set accessors
setup: document check_repository_format()
Also change UK english "behaviour" to US english "behavior".
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be tempting for a server admin to want a stable set of
long-lived packs for dumb clients; but also want to enable bitmaps
to serve smart clients more quickly.
Unfortunately, such a configuration is impossible; so at least warn
users of this incompatibility since commit 21134714 (pack-objects:
turn off bitmaps when we split packs, 2014-10-16).
Tested the warning by inspecting the output of:
make -C t t5310-pack-bitmaps.sh GIT_TEST_OPTS=-v
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We introduce a way to send custom HTTP headers with all requests.
This allows us, for example, to send an extra token from build agents
for temporary access to private repositories. (This is the use case that
triggered this patch.)
This feature can be used like this:
git -c http.extraheader='Secret: sssh!' fetch $URL $REF
Note that `curl_easy_setopt(..., CURLOPT_HTTPHEADER, ...)` takes only
a single list, overriding any previous call. This means we have to
collect _all_ of the headers we want to use into a single list, and
feed it to cURL in one shot. Since we already unconditionally set a
"pragma" header when initializing the curl handles, we can add our new
headers to that list.
For callers which override the default header list (like probe_rpc),
we provide `http_copy_default_headers()` so they can do the same
trick.
Big thanks to Jeff King and Junio Hamano for their outstanding help and
patient reviews.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The possible reasons for exiting are now ordered by the exit code value.
While at it, rewrite the `can not write to the config file` to
`the config file cannot be written` to be grammatically correct and a
proper sentence.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a shallow clone of a repository with submodules, the depth
argument does not influence the submodules, i.e. the submodules are done
as non-shallow clones. It is unclear what the best default is for the
depth of submodules of a shallow clone, so we need to have the possibility
to do all kinds of combinations:
* shallow super project with shallow submodules
e.g. build bots starting always from scratch. They want to transmit
the least amount of network data as well as using the least amount
of space on their hard drive.
* shallow super project with unshallow submodules
e.g. The superproject is just there to track a collection of repositories
and it is not important to have the relationship between the repositories
intact. However the history of the individual submodules matter.
* unshallow super project with shallow submodules
e.g. The superproject is the actual project and the submodule is a
library which is rarely touched.
The new switch to select submodules to be shallow or unshallow supports
all of these three cases.
It is easy to transition from the first to the second case by just
unshallowing the submodules (`git submodule foreach git fetch
--unshallow`), but it is not possible to transition from the second to the
first case (as we would have already transmitted the non shallow over
the network). That is why we want to make the first case the default in
case of a shallow super project. This leads to the inconvenience in the
second case with the shallow super project and unshallow submodules,
as you need to pass `--no-shallow-submodules`.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit said:
We could add the same option to "git pull" and have it passed
through to underlying "git merge". I do not have a fundamental
opposition against such a feature, but this commit does not do
so and instead leaves it as low-hanging fruit for others,
because such a "two project merge" would be done after fetching
the other project into some location in the working tree of an
existing project and making sure how well they fit together, it
is sufficient to allow a local merge without such an option
pass-through from "git pull" to "git merge".
Prepare a patch to make it a reality, just in case it is needed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fetching of history by naming a commit object name directly didn't
work across remote-curl transport.
* gf/fetch-pack-direct-object-fetch:
fetch-pack: update the documentation for "<refs>..." arguments
fetch-pack: fix object_id of exact sha1
"git config --get-urlmatch", unlike other variants of the "git
config --get" family, did not signal error with its exit status
when there was no matching configuration.
* jk/config-get-urlmatch:
Documentation/git-config: fix --get-all description
Documentation/git-config: use bulleted list for exit codes
config: fail if --get-urlmatch finds no value
