When we merge into an unborn branch, there are basically two
steps:
1. Write the sha1 of the new commit into the ref pointed
to by HEAD.
2. Update the index with the new content, and check it out
to the working tree.
We currently do them in this order. However, (2) is the step
that is much more likely to fail, since it can be blocked by
things like untracked working tree files. When it does, the
merge fails and we are left with an empty index but an
updated HEAD.
This patch switches the order, so that a failure in updating
the index leaves us unchanged. Of course, a failure in
updating the ref now leaves us with an updated index and
mis-matched HEAD. That is arguably not much better, but it
is probably less likely to actually happen.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t_e_i() can return -1 or 2 to early shortcut a search. Current code
may use up to two variables to handle it. One for saving return value
from t_e_i temporarily, one for saving return code 2.
The second variable is not needed. If we make sure the first variable
does not change until the next t_e_i() call, then we can do something
like this:
int ret = 0;
while (...) {
if (ret != 2) {
ret = t_e_i();
if (ret < 0) /* no longer interesting */
break;
if (ret == 0) /* skip this round */
continue;
}
/* ret > 0, interesting */
}
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch changes behavior of the two functions. Previously it does
prefix matching only. Now it can also do wildcard matching.
All callers are updated. Some gain wildcard matching (archive,
checkout), others reset pathspec_item.has_wildcard to retain old
behavior (ls-files, ls-tree as they are plumbing).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge" without specifying any commit is a no-op by default.
A new option merge.defaultupstream can be set to true to cause such an
invocation of the command to merge the upstream branches configured for
the current branch by using their last observed values stored in their
remote tracking branches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to be very casual in terminology and used <branch>, <ref> and
<rev> more or less interchangeably with <commit>. Match the help text
given by "git merge -h" with that of the documentation.
Signed-off-by: Jared Hance <jaredhance@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce --min-parents and --max-parents options which limit the
revisions to those commits which have at least (or at most) that many
commits, where negative arguments for --max-parents= denote infinity
(i.e. no upper limit).
In particular:
--max-parents=1 is the same as --no-merges;
--min-parents=2 is the same as --merges;
--max-parents=0 shows only roots; and
--min-parents=3 shows only octopus merges
Using --min-parents=n and --max-parents=m with n>m gives you what you ask
for (i.e. nothing) for obvious reasons, just like when you give --merges
(show only merge commits) and --no-merges (show only non-merge commits) at
the same time.
Also, introduce --no-min-parents and --no-max-parents to do the obvious
thing for convenience.
We compute the number of parents only when we limit by that, so there
is no performance impact when there are no limiters.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/rev-list-one-side-only:
git-log: put space after commit mark
t6007: test rev-list --cherry
log --cherry: a synonym
rev-list: documentation and test for --cherry-mark
revision.c: introduce --cherry-mark
rev-list/log: factor out revision mark generation
rev-list: --left/right-only are mutually exclusive
rev-list: documentation and test for --left/right-only
t6007: Make sure we test --cherry-pick
revlist.c: introduce --left/right-only for unsymmetric picking
* jn/test-sanitize-git-env:
tests: scrub environment of GIT_* variables
config: drop support for GIT_CONFIG_NOGLOBAL
gitattributes: drop support for GIT_ATTR_NOGLOBAL
tests: suppress system gitattributes
tests: stop worrying about obsolete environment variables
* jc/maint-fetch-alt:
fetch-pack: objects in our alternates are available to us
refs_from_alternate: helper to use refs from alternates
Conflicts:
builtin/receive-pack.c
When there are too many paths in the project, the number of rename source
candidates "git diff -C -C" finds will exceed the rename detection limit,
and no inexact rename detection is performed. We however could fall back
to "git diff -C" if the number of modified paths is sufficiently small.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return value from builtin_diff_files() is fed to diff_result_code()
by the caller, and all other callees like builtin_diff_index() do not
have their own call to diff_result_code(). Remove the duplicated one
from builtin_diff_files() and let the caller handle it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix warnings from 'make check'.
- These files don't include 'builtin.h' causing sparse to complain that
cmd_* isn't declared:
builtin/clone.c:364, builtin/fetch-pack.c:797,
builtin/fmt-merge-msg.c:34, builtin/hash-object.c:78,
builtin/merge-index.c:69, builtin/merge-recursive.c:22
builtin/merge-tree.c:341, builtin/mktag.c:156, builtin/notes.c:426
builtin/notes.c:822, builtin/pack-redundant.c:596,
builtin/pack-refs.c:10, builtin/patch-id.c:60, builtin/patch-id.c:149,
builtin/remote.c:1512, builtin/remote-ext.c:240,
builtin/remote-fd.c:53, builtin/reset.c:236, builtin/send-pack.c:384,
builtin/unpack-file.c:25, builtin/var.c:75
- These files have symbols which should be marked static since they're
only file scope:
submodule.c:12, diff.c:631, replace_object.c:92, submodule.c:13,
submodule.c:14, trace.c:78, transport.c:195, transport-helper.c:79,
unpack-trees.c:19, url.c:3, url.c:18, url.c:104, url.c:117, url.c:123,
url.c:129, url.c:136, thread-utils.c:21, thread-utils.c:48
- These files redeclare symbols to be different types:
builtin/index-pack.c:210, parse-options.c:564, parse-options.c:571,
usage.c:49, usage.c:58, usage.c:63, usage.c:72
- These files use a literal integer 0 when they really should use a NULL
pointer:
daemon.c:663, fast-import.c:2942, imap-send.c:1072, notes-merge.c:362
While we're in the area, clean up some unused #includes in builtin files
(mostly exec_cmd.h).
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we had to refresh the index internally before running diff or status,
we opportunistically updated the $GIT_INDEX_FILE so that later invocation
of git can use the lstat(2) we already did in this invocation.
Make them share a helper function to do so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start the initial request small by halving the INITIAL_FLUSH (we will try
to stay one window ahead of the server, so we would end up giving twice as
many "have" in flight at the very beginning). We may want to tweak these
values even more, taking MTU into account.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn Pearce <spearce@spearce.org>
The client has to dig the history deeper when more recent parts of its
history do not have any overlap with the server it is fetching from. Make
the handshake window exponentially larger as we dig deeper, with a
reasonable upper cap.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn Pearce <spearce@spearce.org>
The "git fetch" client presents the most recent 32 commits it has to the
server and gives a chance to the server to say "ok, we heard enough", and
continues reporting what it has in chunks of 32 commits, digging its
history down to older commits.
Move the hardcoded size of the handshake window outside the code, so that
we can tweak it more easily.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn Pearce <spearce@spearce.org>
When orphaning a commit on a detached HEAD, the warning
currently looks like:
Warning: you are leaving 3 commits behind, not connected to
any of your branches:
- commit subject 1
- commit subject 2
- commit subject 3
If you want to keep them by creating a new branch, this
may be a good time to do so with:
git branch new_branch_name 933a615ab0bc566dcfd8c01ec8af159f770d3fe5
Instead of using the "-" list, let's provide a more
traditional oneline format, with the abbreviated sha1 before
each subject. Users are accustomed to seeing commits in this
format, and having the sha1 of each commit can be useful if
you want to cherry-pick instead of creating a new branch.
The new format looks like:
Warning: you are leaving 3 commits behind, not connected to
any of your branches:
933a615 commit subject 1
824fcde commit subject 2
fa49b1a commit subject 3
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When leaving a detached HEAD, we do a revision walk to make
sure the commit we are leaving isn't being orphaned.
However, this leaves crufty marks in the commit objects
which can confuse later walkers, like the one in
stat_tracking_info.
Let's clean up after ourselves to prevent this conflict.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* uk/ls-remote-in-get-remote-url:
git-request-pull: open-code the only invocation of get_remote_url
get_remote_url(): use the same data source as ls-remote to get remote urls
* jk/trace-sifter:
trace: give repo_setup trace its own key
add packet tracing debug code
trace: add trace_strbuf
trace: factor out "do we want to trace" logic
trace: refactor to support multiple env variables
trace: add trace_vprintf
--separate-git-dir tells git to create git dir at the specified
location, instead of where it is supposed to be. A .git file that
points to that location will be put in place so that it appears normal
to repo discovery process.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support the well-know convention of reading standard input instead of a
named file if "-" (dash) is specified. GNU grep does the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the helper function split from the receiving end of "git push" to
allow the same optimization on the receiving end of "git fetch".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
The receiving end of "git push" advertises the objects that the repository
itself does not use, but are at the tips of refs in other repositories
whose object databases are used as alternates for it. This helps it avoid
having to receive (and the pusher having to send) objects that are already
available to the receiving repository via the alternates mechanism.
Tweak the helper function that implements this feature, and move it to
transport.[ch] for future reuse by other programs.
The additional test demonstrates how this optimization is helping "git push",
and "git fetch" is ignorant about it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Rename the make_*_path functions so it's clearer what they do, in
particlar make clear what the differnce between make_absolute_path and
make_nonrelative_path is by renaming them real_path and absolute_path
respectively. make_relative_path has an understandable name and is
renamed to relative_path to maintain the name convention.
The function calls have been replaced 1-to-1 in their usage.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since v1.7.0-rc0~34 (make "mktag" a built-in, 2010-01-22), git mktag
uses the C99-style %td format to print ptrdiff_t values. It falls
back to %d when NO_C99_FORMAT is set, on the assumption that pre-C99
systems probably are using 32-bit pointers.
But many modern systems are 64-bit and
* sometimes one wants to test the NO_C99_FORMAT fallbacks using a
modern development platform;
* some platforms (I'm looking at you, msvc) have not gotten with the
program and are still C89-only.
These ptrdiff_t values are offsets from the beginning of a buffer, so
a size_t or uintmax_t would work about as well. Use the latter so we
can take advantage of the PRIuMAX fallback in git-compat-util.h, even
on C99-challenged systems with 64-bit pointers.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Prepare draft release notes to 1.7.4.2
gitweb: highlight: replace tabs with spaces
make_absolute_path: return the input path if it points to our buffer
valgrind: ignore SSE-based strlen invalid reads
diff --submodule: split into bite-sized pieces
cherry: split off function to print output lines
branch: split off function that writes tracking info and commit subject
standardize brace placement in struct definitions
compat: make gcc bswap an inline function
enums: omit trailing comma for portability
Conflicts:
RelNotes
* lt/rename-no-extra-copy-detection:
diffcore-rename: improve estimate_similarity() heuristics
diffcore-rename: properly honor the difference between -M and -C
for_each_hash: allow passing a 'void *data' pointer to callback
* mg/placeholders-are-lowercase:
Make <identifier> lowercase in Documentation
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
CodingGuidelines: downcase placeholders in usage messages
Readers uninterested in the details of "git cherry"'s output format
can see
print_commit('-', commit, verbose, abbrev);
and ignore the details.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a add_verbose_info function that takes care of adding
- an abbreviated object name;
- a summary of the form [ahead x, behind y] of the relationship
to the corresponding upstream branch;
- a one line commit subject
for the tip commit of a branch, for use in "git branch -v" output.
No functional change intended. This just unindents the code a little
and makes it easier to skip on first reading.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a struct definitions, unlike functions, the prevailing style is for
the opening brace to go on the same line as the struct name, like so:
struct foo {
int bar;
char *baz;
};
Indeed, grepping for 'struct [a-z_]* {$' yields about 5 times as many
matches as 'struct [a-z_]*$'.
Linus sayeth:
Heretic people all over the world have claimed that this inconsistency
is ... well ... inconsistent, but all right-thinking people know that
(a) K&R are _right_ and (b) K&R are right.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that test-lib sets $HOME to protect against pollution from user
settings, GIT_CONFIG_NOGLOBAL is not needed for use by the test
suite any more. And as luck would have it, a quick code search
reveals no other users in the wild.
This patch does not affect GIT_CONFIG_NOSYSTEM, which is still
needed.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If enabled on the connection "multi_ack_detailed no-done" as a
pair allows the remote upload-pack process to send a PACK down
to the client as soon as a "ACK %s ready" message was also sent.
Over git:// and ssh:// where a bi-directional stream is in place
this has very little difference over the classical version that
waits for the client to send a "done\n" line by itself. It does
slightly reduce the latency involved to start the pack stream as
there is one less round-trip from client->server required.
Over smart HTTP this avoids needing to send a final RPC that has
all of the prior common objects. Instead the server is able to
return a pack as soon as its ready to. For many common users the
smart HTTP fetch is now just 2 requests: GET .../info/refs, and
a POST .../git-upload-pack to not only negotiate but also receive
the pack stream. Only users who have more than 32 local unshared
commits with the remote will need additional requests to negotiate
a common merge base.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If multi_ack_detailed was selected in the protocol capabilities
(both client and server are >= Git 1.6.6) the upload-pack side will
send "ACK %s ready" when it knows how to safely cut the graph and
produce a reasonable pack for the want list that was already sent
on the connection.
Upon receiving "ACK %s ready" there is no point in looking at
the remaining commits inside of rev_list. Sending additional
"have %s" lines to the remote will not construct a smaller pack.
It is unlikely a commit older than the current cut point will have
a better delta base than the cut point itself has.
The original design of this code had fetch-pack empty rev_list by
marking a commit and its transitive ancestors COMMON whenever the
remote side said "ACK %s {continue,common}" and skipping over any
already COMMON commits during get_rev(). This approach does not
work when most of rev_list is actually COMMON_REF, commits that
are pointed to by a reference on the remote, which exist locally,
and which have not yet been sent to the remote as a "have %s" line.
Most of the common references are tags in the ref/tags namespace,
using points in the commit graph that are more than 1 commit apart.
In git.git itself, this is currently 340 tags, 339 of which point to
commits in the commit graph. fetch-pack pushes all of these into
rev_list, but is unable to mark them COMMON and discard during a
remote's "ACK %s {continue,common}" because it does not parse through
the entire parent chain. Not parsing the entire parent chain is
an optimization to avoid walking back to the roots of the repository.
Assuming the client is only following the remote (and does not make
its own local commits), the client needs 11 rounds to spin through
the entire list of tags (32 commits per round, ceil(339/32) == 11).
Unfortunately the server knows on the first "have %s" line that
it can produce a good pack, and does not need to see the remaining
320 tags in the other 10 rounds.
Over git:// and ssh:// this isn't as bad as it sounds, the client is
only transmitting an extra 16,000 bytes that it doesn't need to send.
Over smart HTTP, the client must do an additional 10 HTTP POST
requests, each of which incurs round-trip latency, and must upload
the entire state vector of all known common objects. On the final
POST request, this is 16 KiB worth of data.
Fix all of this by clearing rev_list as soon as the remote side
says it can construct a pack.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default of 7 comes from fairly early in git development, when
seven hex digits was a lot (it covers about 250+ million hash
values). Back then I thought that 65k revisions was a lot (it was what
we were about to hit in BK), and each revision tends to be about 5-10
new objects or so, so a million objects was a big number.
These days, the kernel isn't even the largest git project, and even
the kernel has about 220k revisions (_much_ bigger than the BK tree
ever was) and we are approaching two million objects. At that point,
seven hex digits is still unique for a lot of them, but when we're
talking about just two orders of magnitude difference between number
of objects and the hash size, there _will_ be collisions in truncated
hash values. It's no longer even close to unrealistic - it happens all
the time.
We should both increase the default abbrev that was unrealistically
small, _and_ add a way for people to set their own default per-project
in the git config file.
This is the first step to first make it configurable; the default of 7
is not raised yet.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the "could not %s %s... %s" message into "could not revert
%s... %s" and "could not apply %s... %s". This makes it easier for
translators to understand the message.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate messages that use the `me' variable. These are all error
messages referencing the command name, so the name shouldn't be
translated.
Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate the "Your local changes [...]" message without using the
`me' variable, instead split up the two messages so translators can
translate the whole messages as-is.
Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use sprintf format for the error message that's displayed if
GIT_NOTES_REWRITE_MODE is invalid, and leave a note in a TRANSLATORS
comment indicating what the message means.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the "Auto packing the repository" message into quiet and
verbose variants to make translation easier.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the "clean.requireForce set/defaults to true..." die()
message to make it easier to translate.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "To prevent you from losing history" message. A test in
lib-httpd.sh and another in t5541-http-push.sh explicitly checked for
this message. Change them to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the tag_template message as translatable with N_() and then use
it later with _(). We need to skip a test under GETTEXT_POISON that
relies on the output having a leading newline.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the ""Unstaged changes after reset:" message. A test in
t7102-reset.sh explicitly checked for this message. Change it to skip
under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the messages in git-reset that use the reset_type_names static
array to be translatable by marking the array items with N_() and
using _() later.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the basic git-mv messages translatable, but skip things like "rm
'%s'\n" and "git rm '%s'\n" for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize messages made by assigning to the "bad" char* variable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "Wonderful" message. A test in t7600-merge.sh
explicitly checked for this message. Change it to skip under
GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "Updating %s..%s\n" message. A test in
t1200-tutorial.sh explicitly checked for this message. Split it into
two tests to skip the test_cmp test under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "--name-only/--name-status/--check does not make sense"
messages. A test in t4014-format-patch.sh explicitly checked for these
messages. Change them to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "--open-files-in-pager only works on the worktree"
message. A test in t7811-grep-open.sh explicitly checked for this
message. Change it to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the "(non-fast-forward)" message from printf directives and
make it translatable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate a "[rejected]" message spotted by Jeff King, and other
things in update_local_ref along with it.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate some of the formatting messages that appear on git-fetch
showing how branches/tags etc. were updated.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "# Please enter the commit message for your changes."
message. Several tests in t7500-commit.sh and t7502-commit.sh assume
that this message starts with a newline. Change the tests to to skip
under GETTEXT_POISON=YesPlease.
These fail under GETTEXT_POISON=YesPlease because the poison editor
message doesn't do the right thing with comments and line breaks, so
these messages will be incorrectly broken up across lines.
This test should not be skipped under a hypothetical future testing
mode that tests Git under language locales, since those messages
should all start with a newline like the original.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "(root-commit)" and "detached HEAD" fragments that
appear when you commit either the root commit, or a commit in a
detached head translatable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "You are in the middle of a merge -- cannot amend."
message. Several tests in t7110-reset-merge.sh explicitly checked for
this message. Change them to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the "Switched to and reset branch" and "Switched to a new
branch" messages to make them easier to translate.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "HEAD is now at" messages. Several tests in t7201-co.sh
explicitly checked for this message. Change them to skip under
GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the "does not have our/their version" message to make it
easier to translate.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "(no branch)" message that's shown by "git branch" when
you're in a detached HEAD.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "git branch -v" messages translatable, e.g.:
5054b57 [ahead 8] branch error fixup
This is possibly a plumbing message.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "Deleted %sbranch %s (was %s).\n" messages. test in
t3200-branch.sh explicitly checked for this message. Change it to skip
under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This could be done better by splitting it up, but it would change too
much code, which I'm trying to avoid at this point. Instead add a
TRANSLATORS comment to explain what "remote " does.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "Unstaged changes after refreshing the index:"
translatable. It's displayed under `git add --refresh --verbose`.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "remove '%s'" message translatable. It's displayed under `git
add -u --verbose`. Also skip the corresponding test when output is not
in the C locale.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "did not match any files" message translatable, and skip the
test that checks for it when the C_LOCALE_OUTPUT prereq is not
present.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests t2204 (.gitignore) and t3700 (add) explicitly check for
these messages, so while at it, split each relevant test into a part
that just checks "git add"'s exit status and a part that checks
porcelain output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Separate the "Cloning into %s" and "Cloning into bare repository %s"
messages to make them easier to translate. No noticeable change
intended.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These messages could benefit from splitting up. An earlier version of
this patch began like this:
const char *reinit_shared = _("Reinitialized existing shared Git repository in %s\n");
const char *init_shared = _("Initialized empty shared Git repository in %s\n");
const char *reinit_noshared = _("Reinitialized existing Git repository in %s\n");
const char *init_noshared = _("Initialized empty Git repository in %s\n");
But in the first round of gettextization I'm aiming to keep code
changes to a minimum for ease of review. So just add a comment
explaining to translators how the sprintf format gets used so they
can cope for now if the language's grammar allows.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the user visible strings in init-db.c to use gettext
localizations. This only converts messages which needed to be changed
from "foo" to _("foo"), and didn't need any TRANSLATORS comments.
I haven't marked the messages in init_db_usage or init_db_options for
translation, since that would require additional changes in
parse-options.c. Those can be done later.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --max-count limit is implemented by counting revisions in
get_revision(), but the -S and -G take effect later when running diff.
Hence "--max-count=10 -Sfoo" meant "examine the 10 first revisions, and
out of them, show only those changing the occurences of foo", not "show 10
revisions changing the occurences of foo".
In case the commit isn't actually shown, cancel the decrement of
max_count.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, we have identical code for generating revision marks ('<',
'>', '-') in 5 places.
Factor out the code to a single function get_revision_mark() for easier
maintenance and extensibility.
Note that the check for !!revs in graph.c (which gets removed
effectively by this patch) is superfluous.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now the --recurse-submodules option could only be used to either
fetch all populated submodules recursively or to disable recursion
completely. As fetch and pull now by default just fetch those submodules
for which new commits have been fetched in the superproject, a command
line option to enforce that behavior is needed to be able to override
configuration settings.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To be able to access all commits of populated submodules referenced by the
superproject it is sufficient to only then let "git fetch" recurse into a
submodule when the new commits fetched in the superproject record new
commits for it. Having these commits present is extremely useful when
using the "--submodule" option to "git diff" (which is what "git gui" and
"gitk" do since 1.6.6), as all submodule commits needed for creating a
descriptive output can be accessed. Also merging submodule commits (added
in 1.7.3) depends on the submodule commits in question being present to
work. Last but not least this enables disconnected operation when using
submodules, as all commits necessary for a successful "git submodule
update -N" will have been fetched automatically. So we choose this mode as
the default for fetch and pull.
Before a new or changed ref from upstream is updated in update_local_ref()
"git rev-list <new-sha1> --not --branches --remotes" is used to determine
all newly fetched commits. These are then walked and diffed against their
parent(s) to see if a submodule has been changed. If that is the case, its
path is stored to be fetched after the superproject fetch is completed.
Using the "--recurse-submodules" or the "--no-recurse-submodules" option
disables the examination of the fetched refs because the result will be
ignored anyway.
There is currently no infrastructure for storing deleted and new
submodules in the .git directory of the superproject. That's why fetch and
pull for now only fetch submodules that are already checked out and are
not renamed.
In t7403 the "--no-recurse-submodules" argument had to be added to "git
pull" to avoid failure because of the moved upstream submodule repo.
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
wt-status code is used to provide a reminder of changes included and
not included for the commit message template opened in the operator's
text editor by "git commit". Therefore each line of its output begins
with the comment character "#":
# Please enter the commit message for your changes. Lines starting
Use the new status_printf{,_ln,_more} functions to take care of adding
"#" to the beginning of such status lines automatically. Using these
will have two advantages over the current code:
- The obvious one is to force separation of the "#" from the
translatable part of the message when git learns to translate its
output.
- Another advantage is that this makes it easier for us to drop "#"
prefix in "git status" output in later versions of git if we want
to.
Explained-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of maintaining a local variable for it, use s->fp to keep
track of where the commit message template should be written.
This prepares us to take advantage of the status_printf functions,
which use a struct wt_status instead of a FILE pointer to determine
where to send their output.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This shows a trace of all packets coming in or out of a given
program. This can help with debugging object negotiation or
other protocol issues.
To keep the code changes simple, we operate at the lowest
level, meaning we don't necessarily understand what's in the
packets. The one exception is a packet starting with "PACK",
which causes us to skip that packet and turn off tracing
(since the gigantic pack data will not be interesting to
read, at least not in the trace format).
We show both written and read packets. In the local case,
this may mean you will see packets twice (written by the
sender and read by the receiver). However, for cases where
the other end is remote, this allows you to see the full
conversation.
Packet tracing can be enabled with GIT_TRACE_PACKET=<foo>,
where <foo> takes the same arguments as GIT_TRACE.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
wt-status code is used to provide a reminder of changes included and
not included for the commit message template opened in the operator's
text editor by "git commit". Therefore each line of its output begins
with the comment character "#":
# Please enter the commit message for your changes. Lines starting
Use the new status_printf{,_ln,_more} functions to take care of adding
"#" to the beginning of such status lines automatically. Using these
will have two advantages over the current code:
- The obvious one is to force separation of the "#" from the
translatable part of the message when git learns to translate its
output.
- Another advantage is that this makes it easier for us to drop "#"
prefix in "git status" output in later versions of git if we want
to.
Explained-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of maintaining a local variable for it, use s->fp to keep
track of where the commit message template should be written.
This prepares us to take advantage of the status_printf functions,
which use a struct wt_status instead of a FILE pointer to determine
where to send their output.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the line number the patch intended to touch does not match
the line in the version being patched, GNU patch reports that
it applied the hunk at a different line number, with how big an
offset.
Teach "git apply" to do the same under --verbose option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/rename-no-extra-copy-detection:
diffcore-rename: improve estimate_similarity() heuristics
diffcore-rename: properly honor the difference between -M and -C
for_each_hash: allow passing a 'void *data' pointer to callback
When looking for a place to apply a hunk, we used to check lines that
match the preimage of it, starting from the line that the patch wants to
apply the hunk at, looking forward and backward with increasing offsets
until we find a match.
Colin Guthrie found an interesting case where this misapplied a patch that
wanted to touch a preimage that consists of
}
}
return 0;
}
which is a rather unfortunately common pattern.
The target version of the file originally had only one such location, but
the hunk immediately before that created another instance of such block of
lines, and find_pos() happily reported that the preimage of the hunk
matched what it wanted to modify.
Oops.
By marking the lines application of earlier hunks touched and preventing
match_fragment() from considering them as a match with preimage of other
hunks, we can reduce such an accident.
I also considered to teach apply_one_fragment() to take the offset we have
found while applying the previous hunk into account when looking for a
match with find_pos(), but dismissed that approach, because it would
sometimes work better but sometimes worse, depending on the difference
between the version the patch was created against and the version the
patch is being applied.
This does _not_ prevent misapplication of patches to a file that has many
similar looking blocks of lines and a preimage cannot identify which one
of them should be applied. For that, we would need to scan beyond the
first match in find_pos(), and issue a warning (or error out). That will
be a separate topic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_dir must always be non-NULL so "if (git_dir)" is unnecessary.
Before this code, if git_dir == NULL, it will default to
DEFAULT_GIT_DIR_ENVIRONMENT.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common scenario is to create a new branch and push it (checkout -b &&
push [--set-upstream]). In this case, the user was getting "The current
branch %s has no upstream branch.", which doesn't help much.
Provide the user a command to push the current branch. To avoid the
situation in the future, suggest --set-upstream.
While we're there, also improve the error message in the "detached HEAD"
case. We mention explicitly "detached HEAD" since this is the keyword to
look for in documentations.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The formerly implemented algorithm behaved differently to
remote.c:remote_get() at least for remotes that contain a slash. While the
former just assumes a/b is a path the latter checks the config for
remote."a/b" first which is more reasonable.
This removes the last user of git-parse-remote.sh:get_data_source(), so
this function is removed.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rerere forget is a destructive command. When invoked without a path, it
operates on the current directory, potentially deleting many recorded
conflict resolutions.
To make the command safer, a path must be specified as of git 1.8.0. Until
then, give users time to write 'git rerere forget .' if they really mean
the entire current directory.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A pack v2 .idx file usually records offset using 64-bit representation
only when the offset does not fit within 31-bit, but you can handcraft
your .idx file to record smaller offset using 64-bit, storing all zero
in the upper 4-byte. By inspecting the original idx file when running
index-pack --verify, encode such low offsets that do not need to be in
64-bit but are encoded using 64-bit just like the original idx file so
that we can still validate the pack/idx pair by comparing the idx file
recomputed with the original.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given an existing .pack file and the .idx file that describes it,
this new mode of operation reads and re-index the packfile and makes
sure the existing .idx file matches the result byte-for-byte.
All the objects in the .pack file are validated during this operation as
well. Unlike verify-pack, which visits each object described in the .idx
file in the SHA-1 order, index-pack efficiently exploits the delta-chain
to avoid rebuilding the objects that are used as the base of deltified
objects over and over again while validating the objects, resulting in
much quicker verification of the .pack file and its .idx file.
This version however cannot verify a .pack/.idx pair with a handcrafted v2
index that uses 64-bit offset representation for offsets that would fit
within 31-bit. You can create such an .idx file by giving a custom offset
to --index-version option to the command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove two globals, pack_idx_default version and pack_idx_off32_limit,
and place them in a pack_idx_option structure. Allow callers to pass
it to write_idx_file() as a parameter.
Adjust all callers to the API change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Entries in the delta_base array are only grouped by the bytepattern in
the delta_base union, some of which have 20-byte object name of the base
object (i.e. base for REF_DELTA objects), while others have sizeof(off_t)
bytes followed by enough NULs to fill 20-byte. The loops to iterate
through a range inside this array still needs to inspect the type of the
delta, and skip over false hits.
Group the entries also by type to eliminate the potential of false hits.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/placeholders-are-lowercase:
Make <identifier> lowercase in Documentation
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
CodingGuidelines: downcase placeholders in usage messages
* uk/checkout-ambiguous-ref:
Rename t2019 with typo "amiguous" that meant "ambiguous"
checkout: rearrange update_refs_for_switch for clarity
checkout: introduce --detach synonym for "git checkout foo^{commit}"
checkout: split off a function to peel away branchname arg
checkout: fix bug with ambiguous refs
Conflicts:
builtin/checkout.c
* nd/struct-pathspec: (22 commits)
t6004: add pathspec globbing test for log family
t7810: overlapping pathspecs and depth limit
grep: drop pathspec_matches() in favor of tree_entry_interesting()
grep: use writable strbuf from caller for grep_tree()
grep: use match_pathspec_depth() for cache/worktree grepping
grep: convert to use struct pathspec
Convert ce_path_match() to use match_pathspec_depth()
Convert ce_path_match() to use struct pathspec
struct rev_info: convert prune_data to struct pathspec
pathspec: add match_pathspec_depth()
tree_entry_interesting(): optimize wildcard matching when base is matched
tree_entry_interesting(): support wildcard matching
tree_entry_interesting(): fix depth limit with overlapping pathspecs
tree_entry_interesting(): support depth limit
tree_entry_interesting(): refactor into separate smaller functions
diff-tree: convert base+baselen to writable strbuf
glossary: define pathspec
Move tree_entry_interesting() to tree-walk.c and export it
tree_entry_interesting(): remove dependency on struct diff_options
Convert struct diff_options to use struct pathspec
...
Currently, it sounds as if "notice removal of files" distinguishes "-A"
from "-u", and there is no mention of the worktree.
But both notice the removal, and only "-A" adds changes from untracked
files. Say so.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git commit" was rewritten in C (v1.5.4-rc0~78^2~30,
2007-11-08), a subtle bug in --template was introduced. If the
file named by a --template parameter is missing, previously git
would error out with a message:
Commit template file does not exist.
but in the C version the --template parameter gets ignored and
the default template is used.
t7500 has two tests for this case which would have caught it, except
that with the default $EDITOR, the commit message template is left
unmodified, causing 'git commit' to error out and the test to
succeed.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can detach the HEAD at an arbitrary commit in order to browse the
files in various points in the history or build older versions of the
software, without recording any new commit, and come back to an existing
branch. When used in this "sightseer" mode, detached HEAD is a perfectly
safe mechanism. It also is a useful state to experiment with throw-away
commits.
When coming back to an existing branch with "git checkout master",
however, the commits that were created on the detached HEAD will become
unreachable from anywhere but the reflog of the HEAD. Check if the commit
we are about to leave is connected to some ref, and give a final warning
otherwise to remind the user for safety.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sanity-check config variable names when adding and retrieving them. As a side
effect code duplication between git_config_set_multivar and get_value (in
builtin/config.c) was removed and the common functionality was placed in
git_config_parse_key.
This breaks a test in t1300 which used invalid section-less keys in the tests
for "git -c". However, allowing such names there was useless, since there was
no way to set them via config file, and no part of git actually tried to use
section-less keys. This patch updates the test to use more realistic examples
as well as adding its own test.
Signed-off-by: Libor Pechacek <lpechacek@suse.cz>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the user was advised to use commit -c CHERRY_PICK_HEAD after
a conflicting cherry-pick. While this would preserve the original
commit's authorship, it would sadly discard cherry-pick's carefully
crafted MERGE_MSG (which contains the list of conflicts as well as the
original commit-id in the case of cherry-pick -x).
On the other hand, if a bare 'commit' were performed, it would preserve
the MERGE_MSG while resetting the authorship.
In other words, there was no way to simultaneously take the authorship
from CHERRY_PICK_HEAD and the commit message from MERGE_MSG.
This change fixes that situation. A bare 'commit' will now take the
authorship from CHERRY_PICK_HEAD and the commit message from MERGE_MSG.
If the user wishes to reset authorship, that must now be done explicitly
via --reset-author.
A side-benefit of passing commit authorship along this way is that we
can eliminate redundant authorship parsing code from revert.c.
(Also removed an unused include from revert.c)
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a cherry-pick conflicts git advises:
$ git commit -c <original commit id>
to preserve the original commit message and authorship. Instead, let's
record the original commit id in CHERRY_PICK_HEAD and advise:
$ git commit -c CHERRY_PICK_HEAD
A later patch teaches git to handle the '-c CHERRY_PICK_HEAD' part.
Note that we record CHERRY_PICK_HEAD even in the case where there
are no conflicts so that we may use it to communicate authorship to
commit; this will then allow us to remove set_author_ident_env from
revert.c. However, we do not record CHERRY_PICK_HEAD when --no-commit
is used, as presumably the user intends to further edit the commit
and possibly even cherry-pick additional commits on top.
Tests and documentation contributed by Jonathan Nieder.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user can enable or disable it explicitly with the new
--progress, but it defaults to checking isatty(2).
This works only with merge-recursive and subtree. In theory
we could pass a progress flag to other strategies, but none
of them support progress at this point, so let's wait until
they grow such a feature before worrying about propagating
it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For its post-commit summary, commit was explicitly setting
the default rename limit to 100. Presumably when the code
was added, it was necessary to do so. These days, however,
it will fall back properly to the diff default, and that
default has long since changed from 100.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the find_exact_renames() function, this allows us to pass the
diff_options structure pointer to the low-level routines. We will use
that to distinguish between the "rename" and "copy" cases.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 86ac751 (Allow cloning an empty repository,
2009-01-23), doing:
git clone does-not-exist
has created does-not-exist as an empty repository. This was
an unintentional side effect of 86ac751. Even weirder,
doing:
git clone does-not-exist new-dir
_does_ fail, making this "feature" (if you want to consider
it such) broken. Let's detect this situation and explicitly
die. It's almost certainly not what the user intended.
This patch also adds two tests. One for the missing path
case, and one to confirm that a similar case, cloning a
non-repository directory, fails.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, patch-id trips over our very own diff extension for marking
the absence of newline at EOF.
Fix it. (Ignore it, it's whitespace.)
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though fill_directory() takes pathspec, the returned set of paths
is not guaranteed to be free of paths outside the pathspec. Perhaps we
would need to change that, but the current API is that the caller needs
to further filter them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After "rerere" resolves conflicts by reusing old resolution, there would
be three kinds of paths with conflict in the index:
* paths that have been resolved in the working tree by rerere;
* paths that need further work whose resolution could be recorded;
* paths that need resolving that rerere won't help.
When the user wants a list of paths that need hand-resolving, output from
"rerere status" does not help, as it shows only the second category, but
the paths in the third category still needs work (rerere only makes sense
for regular files that have both our side and their side, and does not
help other kinds of conflicts, e.g. "we modified, they deleted").
The new subcommand "rerere remaining" can be used to show both. As
opposed to "rerere status", this subcommand also skips printing paths
that have been added to the index, since these paths are already
resolved and are no longer "remaining".
Initial patch provided by Junio. Refactored and modified to skip
resolved paths by Martin. Commit message mostly by Junio.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users are sometimes confused with two different types of "tracking" behavior
in Git: "remote-tracking" branches (e.g. refs/remotes/*/*) versus the
merge/rebase relationship between a local branch and its @{upstream}
(controlled by branch.foo.remote and branch.foo.merge config settings).
When the push.default is set to 'tracking', it specifies that a branch should
be pushed to its @{upstream} branch. In other words, setting push.default to
'tracking' applies only to the latter of the above two types of "tracking"
behavior.
In order to make this more understandable to the user, we rename the
push.default == 'tracking' option to push.default == 'upstream'.
push.default == 'tracking' is left as a deprecated synonym for 'upstream'.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a merge is stopped due to conflicts or --no-commit, the
subsequent commit calls the prepare-commit-msg hook. However,
it is not called after a clean merge. Fix this inconsistency
by invoking the hook after clean merges as well.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
pull: do not display fetch usage on --help-all
git-tag.txt: list all modes in the description
commit,status: describe -u likewise
add: describe --patch like checkout, reset
commit,merge,tag: describe -m likewise
clone,init: describe --template using the same wording
commit,status: describe --porcelain just like push
commit,tag: use same wording for -F
configure: use AC_LANG_PROGRAM consistently
string_list_append: always set util pointer to NULL
correct type of EMPTY_TREE_SHA1_BIN
They differ by one character only. Being exactly equal should help
translations.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also removes the superfluous "specify" and rewords the misleading
"if any" which sounds as if omitting "-m" would omit the merge commit
message. (It means "if a merge commit is created at all".)
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also corrects a wrong description for clone.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Push has the clearer description, so take that one for all.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Functions such as hashcmp that expect a binary SHA-1 value take
parameters of type "unsigned char *" to avoid accepting a textual
SHA-1 passed by mistake. Unfortunately, this means passing the string
literal EMPTY_TREE_SHA1_BIN requires an ugly cast. Tweak the
definition of EMPTY_TREE_SHA1_BIN to produce a value of more
convenient type.
In the future the definition might change to
extern const unsigned char empty_tree_sha1_bin[20];
#define EMPTY_TREE_SHA1_BIN empty_tree_sha1_bin
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
repo-config was deprecated in 5c66d0d4 on 2008-01-17. Warn the
remaining users that it has been replaced by config and is going to
be removed eventually.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recurse_submodules option was added in ccdd3da6 to bring 'git clone'
into line with 'git fetch' and future commands. The correct option should
have been "recurse-submodules".
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Take care of simple, exceptional cases before the meat of the "check
out by branch name" code begins. After this change, the function
vaguely follows the following pseudocode:
if (-B or -b)
create branch;
if (plain "git checkout" or "git checkout HEAD")
;
else if (--detach or checking out by non-branch commit name)
detach HEAD;
else if (checking out by branch name)
attach HEAD;
One nice side benefit is to make it possible to remove handling of
the --detach option from outside switch_branches.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For example, one might use this when making a temporary merge to
test that two topics work well together.
Patch by Junio, with tests from Jeff King.
[jn: with some extra checks for bogus commandline usage]
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to parse and consume the tree name and "--" in commands such
as "git checkout @{-1} -- '*.c'" is intimidatingly long. Split it out
into a separate function and make it easier to skip on first reading
by making the data it uses and produces more explicit.
No functional change intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commits, trees and tags have structure. Don't let users feed git
with malformed ones. Sooner or later git will die() when
encountering them.
Note that this patch does not check semantics. A tree that points
to non-existent objects is perfectly OK (and should be so, users
may choose to add commit first, then its associated tree for example).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --cached" (without revision) used to mean "git diff --cached
HEAD" (i.e. the user was too lazy to type HEAD). This "correctly"
failed when there was no commit yet. But was that correctness useful?
This patch changes the definition of what particular command means.
It is a request to show what _would_ be committed without further "git
add". The internal implementation is the same "git diff --cached HEAD"
when HEAD exists, but when there is no commit yet, it compares the index
with an empty tree object to achieve the desired result.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there is a random garbage file whose name happens to be 38-byte
long in a .git/objects/??/ directory, the loop terminated prematurely
without marking all the other files that it hasn't checked in the
readdir() loop.
Treat such a file just like any other garbage file, and do not break out
of the readdir() loop.
While at it, replace repeated sprintf() calls to a single one outside the
loop.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ak/describe-exact:
describe: Delay looking up commits until searching for an inexact match
describe: Store commit_names in a hash table by commit SHA1
describe: Do not use a flex array in struct commit_name
describe: Use for_each_rawref
Instead of stripping space characters past the beginning of the
line and overflowing a buffer, stop at the beginning of the line
(mimicking the corresponding fix in remote-fd).
The argument to isspace does not need to be cast explicitly because
git isspace takes care of that already.
Noticed-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the message advises to fix the configuration first, the
advantage of using this command is that it is cut-and-paste ready,
while using --author='...' requires the user to type his name and
email again.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usual dwim_ref lookup prefers tags to branches. Because
checkout primarily works on branches, though, we switch that
behavior to prefer branches.
However, there was a bug in the implementation in which we
used lookup_commit_reference (which used the regular lookup
rules) to get the actual commit to checkout. Checking out an
ambiguous ref therefore ended up putting us in an extremely
broken state in which we wrote the branch ref into HEAD, but
actually checked out the tree for the tag.
This patch fixes the bug by always attempting to pull the
commit to be checked out from the branch-ified version of
the name we were given.
Patch by Junio, tests and commit message from Jeff King.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For example, this would allow cherry-picking or reverting patches from
a piece of history with a different end-of-line style, like so:
$ git revert -Xrenormalize old-problematic-commit
Currently that is possible with manual use of merge-recursive but the
cherry-pick/revert porcelain does not expose the functionality.
While at it, document the existing support for --strategy.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/setup: (47 commits)
setup_work_tree: adjust relative $GIT_WORK_TREE after moving cwd
git.txt: correct where --work-tree path is relative to
Revert "Documentation: always respect core.worktree if set"
t0001: test git init when run via an alias
Remove all logic from get_git_work_tree()
setup: rework setup_explicit_git_dir()
setup: clean up setup_discovered_git_dir()
t1020-subdirectory: test alias expansion in a subdirectory
setup: clean up setup_bare_git_dir()
setup: limit get_git_work_tree()'s to explicit setup case only
Use git_config_early() instead of git_config() during repo setup
Add git_config_early()
git-rev-parse.txt: clarify --git-dir
t1510: setup case #31
t1510: setup case #30
t1510: setup case #29
t1510: setup case #28
t1510: setup case #27
t1510: setup case #26
t1510: setup case #25
...
This logic is now only used by cmd_init_db(). setup_* functions do not
rely on it any more. Move all the logic to cmd_init_db() and turn
get_git_work_tree() into a simple function.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_git_work_tree() takes input as core.worktree, core.bare,
GIT_WORK_TREE and decides correct worktree setting.
Unfortunately it does not do its job well. core.worktree and
GIT_WORK_TREE should only be taken into account, if GIT_DIR is set
(which is handled by setup_explicit_git_dir). For other setup cases,
only core.bare matters.
Add a temporary variable setup_explicit to adjust get_git_work_tree()
behavior as such. This variable will be gone once setup_* rework is
done.
Also remove is_bare_repository_cfg check in set_git_work_tree() to
ease the rework. We are going to check for core.bare and core.worktree
early before setting worktree. For example, if core.bare is true, no
need to set worktree.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When determine_author_info() returns to the calling prepare_to_commit(),
we already know the pieces of information necessary to determine what
author ident will be used in the final message, but deferred making a call
to fmt_ident() before the final commit_tree(). Most importantly, we would
open the editor to ask the user to compose the log message before it.
As one important side effect of fmt_ident() is to error out when the given
information is malformed, this resulted in us spawning the editor first
and then refusing to commit due to error, even though we had enough
information to detect the error before starting the editor, which was
annoying.
Move the fmt_ident() call to the end of determine_author_info() where we
have final determination of author info to rectify this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ak/describe-exact:
describe: Delay looking up commits until searching for an inexact match
describe: Store commit_names in a hash table by commit SHA1
describe: Do not use a flex array in struct commit_name
describe: Use for_each_rawref
* jn/parse-options-extra:
update-index: migrate to parse-options API
setup: save prefix (original cwd relative to toplevel) in startup_info
parse-options: make resuming easier after PARSE_OPT_STOP_AT_NON_OPTION
parse-options: allow git commands to invent new option types
parse-options: never suppress arghelp if LITERAL_ARGHELP is set
parse-options: do not infer PARSE_OPT_NOARG from option type
parse-options: sanity check PARSE_OPT_NOARG flag
parse-options: move NODASH sanity checks to parse_options_check
parse-options: clearer reporting of API misuse
parse-options: Don't call parse_options_check() so much
* jn/git-cmd-h-bypass-setup:
update-index -h: show usage even with corrupt index
merge -h: show usage even with corrupt index
ls-files -h: show usage even with corrupt index
gc -h: show usage even with broken configuration
commit/status -h: show usage even with broken configuration
checkout-index -h: show usage even in an invalid repository
branch -h: show usage even in an invalid repository
Conflicts:
builtin/merge.c
* mg/maint-tag-rfc1991:
tag: recognize rfc1991 signatures
tag: factor out sig detection for tag display
tag: factor out sig detection for body edits
verify-tag: factor out signature detection
t/t7004-tag: test handling of rfc1991 signatures
All files that include this header file use the same four line
incantation:
#ifndef NO_PTHREADS
#include <pthread.h>
#include "thread-utils.h"
#endif
Move the responsibility for that gymnastics to the header file from the
files that include it. This approach makes it easier to later declare new
services that are related to threading in thread-utils.h and have them
available to all the threading code.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that struct commit.util is not used until after we've checked that
the argument doesn't exactly match a tag, we can wait until then to
look up the commits for each tag.
This avoids a lot of I/O on --exact-match queries in repositories with
many tags. For example, 'git describe --exact-match HEAD' becomes
about 12 times faster on a cold cache (3.2s instead of 39s) in a
linux-2.6 repository with 2000 packed tags. That is a huge win for the
interactivity of the __git_ps1 shell prompt helper when on a detached
HEAD.
Signed-off-by: Anders Kaseorg <andersk@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
describe is currently forced to look up the commit at each tag in
order to store the struct commit_name pointers in struct commit.util.
For --exact-match queries, those lookups are wasteful. In preparation
for removing them, put the commit_names into a hash table, indexed by
commit SHA1, that can be used to quickly check for exact matches.
Signed-off-by: Anders Kaseorg <andersk@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now add_to_known_names overwrites commit_names in place when multiple
tags point to the same commit. This will make it easier to store
commit_names in a hash table.
Signed-off-by: Anders Kaseorg <andersk@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't waste time checking for dangling refs; they wouldn't affect the
output of 'git describe' anyway. Although this does not gain much
performance by itself, it does in conjunction with the next commits.
Signed-off-by: Anders Kaseorg <andersk@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/maint-tag-rfc1991:
tag: recognize rfc1991 signatures
tag: factor out sig detection for tag display
tag: factor out sig detection for body edits
verify-tag: factor out signature detection
t/t7004-tag: test handling of rfc1991 signatures
* jh/notes-merge: (23 commits)
Provide 'git merge --abort' as a synonym to 'git reset --merge'
cmd_merge(): Parse options before checking MERGE_HEAD
Provide 'git notes get-ref' to easily retrieve current notes ref
git notes merge: Add testcases for merging notes trees at different fanouts
git notes merge: Add another auto-resolving strategy: "cat_sort_uniq"
git notes merge: --commit should fail if underlying notes ref has moved
git notes merge: List conflicting notes in notes merge commit message
git notes merge: Manual conflict resolution, part 2/2
git notes merge: Manual conflict resolution, part 1/2
Documentation: Preliminary docs on 'git notes merge'
git notes merge: Add automatic conflict resolvers (ours, theirs, union)
git notes merge: Handle real, non-conflicting notes merges
builtin/notes.c: Refactor creation of notes commits.
git notes merge: Initial implementation handling trivial merges only
builtin/notes.c: Split notes ref DWIMmery into a separate function
notes.c: Use two newlines (instead of one) when concatenating notes
(trivial) t3303: Indent with tabs instead of spaces for consistency
notes.h/c: Propagate combine_notes_fn return value to add_note() and beyond
notes.h/c: Allow combine_notes functions to remove notes
notes.c: Reorder functions in preparation for next commit
...
Conflicts:
builtin.h
--refresh and --really-refresh accept flags (like -q) and modify
an error indicator. It might make sense to make the error
indicator global, but just pass the flags and a pointer to the error
indicator in a struct instead.
--cacheinfo wants 3 arguments. Use the OPTION_LOWLEVEL_CALLBACK
extension to grab them and PARSE_OPT_NOARG to disallow the "sticked"
--cacheinfo=foo form. (The resulting message
$ git update-index --cacheinfo=foo
error: option `cacheinfo' takes no value
is unfortunately incorrect.)
--assume-unchanged and --no-assume-unchanged probably should use the
OPT_UYN feature; but use a callback for now so the existing MARK_FLAG
and UNMARK_FLAG values can be used.
--stdin and --index-info are still constrained to be the last argument
(implemented using the OPTION_LOWLEVEL_CALLBACK extension).
--unresolve and --again consume all arguments that come after them
(also using OPTION_LOWLEVEL_CALLBACK).
The order of options matters. Each path on the command line is
affected only by the options that come before it. A custom
argument-parsing loop with parse_options_step() brings that about.
In exchange for all the fuss, we get the usual perks: support for
un-sticked options, better usage error messages, more useful -h
output, and argument parsing code that should be easier to tweak
in the future.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_options_check() is being called for each invocation of
parse_options_step which can be quite a bit for some commands. The
commit introducing this function cb9d398 (parse-options: add
parse_options_check to validate option specs., 2009-06-09) had the
correct motivation and explicitly states that parse_options_check()
should be called from parse_options_start(). However, the implementation
differs from the motivation. Fix it.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/thinner-wrapper:
Remove pack file handling dependency from wrapper.o
pack-objects: mark file-local variable static
wrapper: give zlib wrappers their own translation unit
strbuf: move strbuf_branchname to sha1_name.c
path helpers: move git_mkstemp* to wrapper.c
wrapper: move odb_* to environment.c
wrapper: move xmmap() to sha1_file.c
* pn/commit-autosquash:
add tests of commit --squash
commit: --squash option for use with rebase --autosquash
add tests of commit --fixup
commit: --fixup option for use with rebase --autosquash
pretty.c: teach format_commit_message() to reencode the output
commit: helper methods to reduce redundant blocks of code
Conflicts:
Documentation/git-commit.txt
t/t3415-rebase-autosquash.sh
* sn/diff-doc:
docs: clarify git diff modes of operation
diff,difftool: Don't use the {0,2} notation in usage strings
CodingGuidelines: Add a section on writing documentation
* maint:
add: introduce add.ignoreerrors synonym for add.ignore-errors
bash: Match lightweight tags in prompt
git-commit.txt: (synopsis): move -i and -o before "--"
* maint-1.7.2:
add: introduce add.ignoreerrors synonym for add.ignore-errors
bash: Match lightweight tags in prompt
git-commit.txt: (synopsis): move -i and -o before "--"
You can tell "git status" to paint the name of the current branch in its
output (the line that says "On branch ...") by setting the configuration
variable color.status.branch; it is by default turned off.
Signed-off-by: Aleksi Aalto <aga@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
