This change makes the code smaller and we can put it at the top of
the script, its rightful place as setup code.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Field names like To:, Cc:, etc. are case-insensitive; use a
case-insensitive regexp to match them as such.
Previously, git-send-email would fail to pick-up the addresses when
in-body "fake" headers with different cases (e.g. lowercase "cc:")
are manually inserted to the messages it was asked to send, even
though the text will still show them.
Signed-off-by: Nickolai Zeldovich <nickolai@csail.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
InfoZIP's unzip takes default parameters from the environment variable
UNZIP. Unset it in the test library and use GIT_UNZIP for specifying
alternate versions of the unzip command instead.
t0024 wasn't even using variable for the actual extraction. t5000
was, but when setting it to InfoZIP's unzip it would try to extract
from itself (because it treats the contents of $UNZIP as parameters),
which failed of course.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no documented, reliable, and future-proof method to
determine the installed w32api version on Cygwin. There are many
things that can be done that will work frequently, except when they
won't.
The only sane thing is to follow the guidance of the Cygwin
developers: the only supported configuration is that which the
current setup.exe produces, and in the case of problems, if the
installation is not up to date then updating is the first required
action.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for the ALLOC_GROW API implicitly encouraged
developers to use "ary" as the variable name for the array which is
dynamically grown. However "ary" is an unusual abbreviation hardly
used anywhere else in the source tree, and it is also better to name
variables based on their contents not on their type.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We record the uncompressed and compressed sizes and the CRC of streamed
files as zero in the local header of the file. The actual values are
recorded in an extra data descriptor after the file content, and in the
usual ZIP directory entry at the end of the archive.
While we know the compressed size and the CRC only after we processed
the contents, we actually know the uncompressed size right from the
start. And for files that we store uncompressed we also already know
their final size.
Do it like InfoZIP's zip and recored the known values, even though they
can be reconstructed using the ZIP directory and the data descriptors
alone. InfoZIP's unzip worked fine before, but NetBSD's version
actually depends on these fields.
The uncompressed size is already set by sha1_object_info(). We just
need to initialize the compressed size to zero or the uncompressed size
depending on the compression method (0 means storing). The CRC was
propertly initialized already.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When building manual pages, the source text is transformed to XML with
AsciiDoc before the man pages are generated from the XML with xmlto.
Fix the dependencies in the Makefile so that the XML files are rebuilt
when asciidoc.conf changes and not just the manual pages from
unchanged XML, and move the dependencies from a recipeless rule to the
rules with commands that use asciidoc.conf to make the dependencies
easier to understand and maintain.
Reported-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Tested-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a sub-command dies due to a signal, we encode the
signal number into the numeric exit status as "signal -
128". This is easy to identify (versus a regular positive
error code), and when cast to an unsigned integer (e.g., by
feeding it to exit), matches what a POSIX shell would return
when reporting a signal death in $? or through its own exit
code.
So we have a negative value inside the code, but once it
passes across an exit() barrier, it looks positive (and any
code we receive from a sub-shell will have the positive
form). E.g., death by SIGPIPE (signal 13) will look like
-115 to us in inside git, but will end up as 141 when we
call exit() with it. And a program killed by SIGPIPE but run
via the shell will come to us with an exit code of 141.
Unfortunately, this means that when the "use_shell" option
is set, we need to be on the lookout for _both_ forms. We
might or might not have actually invoked the shell (because
we optimize out some useless shell calls). If we didn't invoke
the shell, we will will see the sub-process's signal death
directly, and run-command converts it into a negative value.
But if we did invoke the shell, we will see the shell's
128+signal exit status. To be thorough, we would need to
check both, or cast the value to an unsigned char (after
checking that it is not -1, which is a magic error value).
Fortunately, most callsites do not care at all whether the
exit was from a code or from a signal; they merely check for
a non-zero status, and sometimes propagate the error via
exit(). But for the callers that do care, we can make life
slightly easier by just using the consistent positive form.
This actually fixes two minor bugs:
1. In launch_editor, we check whether the editor died from
SIGINT or SIGQUIT. But we checked only the negative
form, meaning that we would fail to notice a signal
death exit code which was propagated through the shell.
2. In handle_alias, we assume that a negative return value
from run_command means that errno tells us something
interesting (like a fork failure, or ENOENT).
Otherwise, we simply propagate the exit code. Negative
signal death codes confuse us, and we print a useless
"unable to run alias 'foo': Success" message. By
encoding signal deaths using the positive form, the
existing code just propagates it as it would a normal
non-zero exit code.
The downside is that callers of run_command can no longer
differentiate between a signal received directly by the
sub-process, and one propagated. However, no caller
currently cares, and since we already optimize out some
calls to the shell under the hood, that distinction is not
something that should be relied upon by callers.
Fix the same logic in t/test-terminal.perl for consistency [jc:
raised by Jonathan in the discussion].
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name field of a tar header has a size of 100 characters. This limit
was extended long ago in a backward compatible way by providing the
additional prefix field, which can hold 155 additional characters. The
actual path is constructed at extraction time by concatenating the prefix
field, a slash and the name field.
get_path_prefix() is used to determine which slash in the path is used as
the cutting point and thus which part of it is placed into the field
prefix and which into the field name. It tries to cram as much into the
prefix field as possible. (And only if we can't fit a path into the
provided 255 characters we use a pax extended header to store it.)
If a path is longer than 100 but shorter than 156 characters and ends
with a slash (i.e. is for a directory) then get_path_prefix() puts the
whole path in the prefix field and leaves the name field empty. GNU tar
reconstructs the path without complaint, but the tar included with
NetBSD 6 does not: It reports the header to be invalid.
For compatibility with this version of tar, make sure to never leave the
name field empty. In order to do that, trim the trailing slash from the
part considered as possible prefix, if it exists -- that way the last
path component (or more, but not less) will end up in the name field.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 1327452 cleaned up an unused parameter from
wait_or_whine, but forgot to update a caller that is inside
"#ifdef NO_PTHREADS".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b57fb80a7d (init, clone: support --separate-git-dir for .git file)
git clone supports the --separate-git-dir option to create the git dir
outside the work tree. But when that option is used, the git dir won't be
deleted in case the clone fails like it would be without this option. This
makes clone lose its atomicity as in case of a failure a partly set up git
dir is left behind. A real world example where this leads to problems is
when "git submodule update" fails to clone a submodule and later calls to
"git submodule update" stumble over the partially set up git dir and try
to revive the submodule from there, which then fails with a not very user
friendly error message.
Fix that by updating the junk_git_dir variable (used to remember if and
what git dir should be removed in case of failure) to the new value given
with the --seperate-git-dir option. Also add a test for this to t5600 (and
while at it fix the former last test to not cd into a directory to test
for its existence but use "test -d" instead).
Reported-by: Manlio Perillo <manlio.perillo@gmail.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The flow described in the document is still correct, but over time I
have automated various parts of the workflow with tools and their
use was not explained at all.
Update it and outline the use of two key scripts from the 'todo'
branch, "Reintegrate" and "cook".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
65969d4 (merge: honor prepare-commit-msg hook, 2011-02-14) tried to
make "git commit" and "git merge" consistent, because a merge that
required user assistance has to be concluded with "git commit", but
back then only "git commit" triggered prepare-commit-msg hook.
When it added a call to run the prepare-commit-msg hook, however, it
forgot to check the exit code from the hook like "git commit" does,
and ended up replacing one inconsistency with another.
When prepare-commit-msg hook that is run from "git merge" exits with
a non-zero status, abort the commit.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test Makefile knows about a few "lint" checks for common
errors. However, they are not enabled as part of "make test"
by default, which means that many people do not bother
running them. Since they are both quick to run and accurate
(i.e., no false positives), there should be no harm in
turning them on and helping submitters catch errors earlier.
We could just set:
TEST_LINT = test-lint
to enable all tests. But that would be unnecessarily
annoying later on if we add slower or less accurate tests
that should not be part of the default. Instead, we name the
tests individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting with v1.7.12-rc0~4^2 (build: reconfigure automatically if
configure.ac changes, 2012-07-19), "config.status --recheck" is
automatically run every time the "configure" script changes. In
particular, that means the configuration procedure repeats whenever
the version number changes (since the configure script changes to
support "./configure --version" and "./configure --help"), making
bisecting painfully slow.
The intent was to make the reconfiguration process only trigger for
changes to configure.ac's logic. Tweak the Makefile rule to match
that intent by depending on configure.ac instead of configure.
Reported-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We told readers to "send it to the list" (or the maintainer) without
telling what addresses are to be used. Correct this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The section is no longer a concise checklist. It also talks about
things that are not covered in the "Long version" text, which means
people need to read both, covering more or less the same thing in
different phrasing.
Fold the details into the main text and remove the section.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sed -i is not portable on all systems. Use sed with different input
and output files. Utilize a tmp file whenever needed.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$1 becomes undef by internal regex, since it has no capture groups.
Match against accpetable control characters using index() instead of a regex.
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test all possible use-cases of git-status "--ignored" with the
"--untracked-files" option with values "normal" and "all":
- An untracked directory is listed as untracked if it has a mix of
untracked and ignored files in it. With -uall, ignored/untracked
files are listed as ignored/untracked.
- An untracked directory with only ignored files is listed as
ignored. With -uall, all files in the directory are listed.
- An ignored directory is listed as ignored. With -uall, all files
in the directory are listed as ignored.
- An ignored and committed directory is listed as ignored if it has
untracked files. With -uall, all untracked files in the
directory are listed as ignored.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current behavior of git-status is inconsistent and misleading.
Especially when used with --untracked-files=all option:
- files ignored in untracked directories will be missing from
status output.
- untracked files in committed yet ignored directories are also
missing.
- with --untracked-files=normal, untracked directories that
contains only ignored files are dropped too.
Make the behavior more consistent across all possible use cases:
- "--ignored --untracked-files=normal" doesn't show each specific
files but top directory. It instead shows untracked directories
that only contains ignored files, and ignored tracked directories
with untracked files.
- "--ignored --untracked-files=all" shows all ignored files, either
because it's in an ignored directory (tracked or untracked), or
because the file is explicitly ignored.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not necessarily every bundle file can be cloned from. Only the ones
that do not need prerequisites can.
When 1d52b02 (Documentation: minor grammatical fixes and rewording
in git-bundle.txt, 2009-03-22) reworded this paragraph, it lost a
critical hint to tell readers why this particular bundle can be
cloned from. Resurrect it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were only mentioned in periodical "A note from the maintainer"
posting and not in the documentation suite. SubmittingPatches has a
section to help contributors decide on what commit to base their
changes, which is the most suitable place for this information.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The introductory text in the "long version" talks about the origin
of this document with "I started ...", but it is unclear who that I
is, and more importantly, it is not interesting how it was started.
Just state the purpose of the document to help readers decide if it
is releavant to them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because the bundle created in the example does not record HEAD, "git
clone" will not check out the files to the working tree:
$ git clone pr.bundle q/
Cloning into 'q'...
Receiving objects: 100% (619/619), 13.52 MiB | 18.74 MiB/s, done.
Resolving deltas: 100% (413/413), done.
warning: remote HEAD refers to nonexistent ref, unable to checkout.
Avoid alarming the readers by adding "-b master" to the example. A
better fix may be to arrange the bundle created in the earlier step
to record HEAD, so that it can be cloned without this workaround.
Signed-off-by: Brilliantov Kirill Vladimirovich <brilliantov@inbox.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The credit lines "By" and "Via" to credit authors and committers for
their contributions on the side branch are meant as a hint to the
integrator to decide whom to mention in the log message text. After
the integrator saves the message in the editor, they are meant to go
away and that is why they are commented out.
When a merge is recorded without editing the generated message,
however, its contents do not go through the normal stripspace()
and these lines are left in the merge.
Stop producing them when we know the merge is going to be recorded
without editing, i.e. when --no-edit is given.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When testing aliases in t/t1020-subdirectory.sh use longer names so that
they're less likely to conflict with a git-* command somewhere in the
$PATH.
I have a git-ss command in my path which prevents the 'ss' alias from
being used. This command will always fail for git.git, causing the test
to fail. Even if the command succeeded, that would be a false success
for the test since the alias wasn't actually used. A longer, more
descriptive name will make it much less likely that somebody has a
command in their $PATH which will shadow the alias created for the test.
While here, use a longer name for the 'test' alias as well since that is
also short and meaningful enough to make it not unlikely that somebody
would have a command in their $PATH which will shadow that as well.
Signed-off-by: Aaron Schrab <aaron@schrab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parsecvs code has been neglected for a long time, and the only
public version does not even build correctly. I have been handed
control of the project and intend to fix this, but until I do it
cannot be recommended.
Also, the project URL given for Subversion needed to be updated
to follow their site move.
Signed-off-by: Eric S. Raymond <esr@thyrsus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We earlier removed a link to list of contributors that pointed to a
defunct page; let's use a working one from Ohloh.net to replace it
instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sl/maint-git-svn-docs:
git-svn: Note about tags.
git-svn: Expand documentation for --follow-parent
git-svn: Recommend use of structure options.
git-svn: Document branches with at-sign(@).
Document that 'git svn' will import SVN tags as branches.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Describe what the option --follow-parent does, and what happens if it is
set or unset.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document that when using git svn, one should usually either use the
directory structure options to import branches as branches, or only
import one subdirectory. The default behaviour of cloning all branches
and tags as subdirectories in the working copy is usually not what the
user wants.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git svn sometimes creates branches with an at-sign in the name
(branchname@revision). These branches confuse many users and it is a FAQ
why they are created. Document when git svn creates them.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the distant past, the order things were documented was
'Invocation', 'Commands', 'Capabilities', ...
Then it was decided that before giving a list of Commands, there
should be an overall description of the 'Input format', which was
a wise decision. However, this description was put as the very
first thing, with the rationale that any implementor would want
to know that first.
However, it seems an implementor would actually first need to
know how the remote helper will be invoked, so moving
'Invocation' to the front again seems logical. Moreover, we now
don't switch from discussing the input format to the invocation
style and then back to input related stuff.
Signed-off-by: Max Horn <max@quendi.de>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
19299a8 (Documentation: Move diff.<driver>.* from config.txt to
diff-config.txt, 2011-04-07) moved the diff configuration options to
diff-config.txt, but forgot about diff.wordRegex, which was left
behind in config.txt. Fix this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This file is rather outdated and IMHO shouldn't be there in the first place.
(If there are translations of the Git documentation they are better be kept
separate from the original documentation.)
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use $TMPDIR when creating the /dev/null placeholder for p4merge.
This prevents users from finding a seemingly random untracked file
in their worktree.
This is different than what mergetool does with $LOCAL and
$REMOTE because those files exist to aid users when resolving
merges. p4merge's /dev/null placeholder is not helpful in that
situation so it is sensible to keep it out of the worktree.
Reported-by: Jeremy Morton <admin@game-point.net>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit documented two known breakages revolving around
a case where one side flips a tree into a blob (or vice versa),
where the original code simply gets confused and feeds a mixture of
trees and blobs into either the recursive merge-tree (and recursing
into the blob will fail) or three-way merge (and merging tree contents
together with blobs will fail).
Fix it by feeding trees (and only trees) into the recursive
merge-tree machinery and blobs (and only blobs) into the three-way
content level merge machinery separately; when this happens, the
entire merge has to be marked as conflicting at the structure level.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the "branch1" parameter given to resolve() to "ours", to
clarify what is going on. Also, annotate the unresolved_directory()
function with some comments to show what decisions are made in each
step, and highlight two bugs that need to be fixed.
Add two tests to t4300 to illustrate these bugs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
