A new helper function ref_update_to_be_sent() decides for each ref
if the update is to be sent based on the status previously set by
set_ref_status_for_push() and also if this is a mirrored push.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
20e8b465 (refactor ref status logic for pushing, 2010-01-08)
restructured the code to set status for each ref to be pushed, but
did not quite go far enough. We inspect the status set earlier by
set_refs_status_for_push() and then perform yet another update to
the status of a ref with an otherwise OK status to be deleted to
mark it with REF_STATUS_REJECT_NODELETE when the protocol tells us
never to delete.
Split the latter into a separate loop that comes before we enter the
per-ref loop. This way we would have one less condition to check in
the main loop.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most struct child_process variables are cleared using memset first after
declaration. Provide a macro, CHILD_PROCESS_INIT, that can be used to
initialize them statically instead. That's shorter, doesn't require a
function call and is slightly more readable (especially given that we
already have STRBUF_INIT, ARGV_ARRAY_INIT etc.).
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fetching from a shallow-cloned repository used to be forbidden,
primarily because the codepaths involved were not carefully vetted
and we did not bother supporting such usage. This attempts to allow
object transfer out of a shallow-cloned repository in a controlled
way (i.e. the receiver become a shallow repository with truncated
history).
* nd/shallow-clone: (31 commits)
t5537: fix incorrect expectation in test case 10
shallow: remove unused code
send-pack.c: mark a file-local function static
git-clone.txt: remove shallow clone limitations
prune: clean .git/shallow after pruning objects
clone: use git protocol for cloning shallow repo locally
send-pack: support pushing from a shallow clone via http
receive-pack: support pushing to a shallow clone via http
smart-http: support shallow fetch/clone
remote-curl: pass ref SHA-1 to fetch-pack as well
send-pack: support pushing to a shallow clone
receive-pack: allow pushes that update .git/shallow
connected.c: add new variant that runs with --shallow-file
add GIT_SHALLOW_FILE to propagate --shallow-file to subprocesses
receive/send-pack: support pushing from a shallow clone
receive-pack: reorder some code in unpack()
fetch: add --update-shallow to accept refs that update .git/shallow
upload-pack: make sure deepening preserves shallow roots
fetch: support fetching from a shallow repository
clone: support remote shallow repository
...
Commit f2c681cf ("send-pack: support pushing from a shallow clone
via http", 05-12-2013) adds the 'advertise_shallow_grafts_buf'
function as an external symbol.
Noticed by sparse. ("'advertise_shallow_grafts_buf' was not declared.
Should it be static?")
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a few duplicate implementations of prefix/suffix comparison
functions, and rename them to starts_with and ends_with.
* cc/starts-n-ends-with:
replace {pre,suf}fixcmp() with {starts,ends}_with()
strbuf: introduce starts_with() and ends_with()
builtin/remote: remove postfixcmp() and use suffixcmp() instead
environment: normalize use of prefixcmp() by removing " != 0"
The latter can do everything the former can and is used in many more
places.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Up to now git has assumed that all servers are able to fix thin
packs. This is however not always the case.
Document the 'no-thin' capability and prevent send-pack from generating
a thin pack if the server advertises it.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The codepath that send_pack() calls pack_objects() mistakenly
closed the same file descriptor twice, leading to potentially
closing a wrong file descriptor that was opened in the meantime.
* jl/pack-transfer-avoid-double-close:
Clear fd after closing to avoid double-close error
In send_pack(), clear the fd passed to pack_objects() by setting
it to -1, since pack_objects() closes the fd (via a call to
run_command()). Likewise, in get_pack(), clear the fd passed to
run_command().
Not doing so risks having git_transport_push(), caller of
send_pack(), closing the fd again, possibly incorrectly closing
some other open file; or similarly with fetch_refs_from_pack(),
indirect caller of get_pack().
Signed-off-by: Jens Lindström <jl@opera.com>
Acked-by: Jeff King <peff@peff.net>
Acked-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches the deepest part of the callchain for "git push" (and
"git send-pack") to enforce "the old value of the ref must be this,
otherwise fail this push" (aka "compare-and-swap" / "--lockref").
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The definition of "struct ref" in "cache.h", a header file so
central to the system, always confused me. This structure is not
about the local ref used by sha1-name API to name local objects.
It is what refspecs are expanded into, after finding out what refs
the other side has, to define what refs are updated after object
transfer succeeds to what values. It belongs to "remote.h" together
with "struct refspec".
While we are at it, also move the types and functions related to the
Git transport connection to a new header file connect.h
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the callers of packet_read_line just read into a
static 1000-byte buffer (callers which handle arbitrary
binary data already use LARGE_PACKET_MAX). This works fine
in practice, because:
1. The only variable-sized data in these lines is a ref
name, and refs tend to be a lot shorter than 1000
characters.
2. When sending ref lines, git-core always limits itself
to 1000 byte packets.
However, the only limit given in the protocol specification
in Documentation/technical/protocol-common.txt is
LARGE_PACKET_MAX; the 1000 byte limit is mentioned only in
pack-protocol.txt, and then only describing what we write,
not as a specific limit for readers.
This patch lets us bump the 1000-byte limit to
LARGE_PACKET_MAX. Even though git-core will never write a
packet where this makes a difference, there are two good
reasons to do this:
1. Other git implementations may have followed
protocol-common.txt and used a larger maximum size. We
don't bump into it in practice because it would involve
very long ref names.
2. We may want to increase the 1000-byte limit one day.
Since packets are transferred before any capabilities,
it's difficult to do this in a backwards-compatible
way. But if we bump the size of buffer the readers can
handle, eventually older versions of git will be
obsolete enough that we can justify bumping the
writers, as well. We don't have plans to do this
anytime soon, but there is no reason not to start the
clock ticking now.
Just bumping all of the reading bufs to LARGE_PACKET_MAX
would waste memory. Instead, since most readers just read
into a temporary buffer anyway, let's provide a single
static buffer that all callers can use. We can further wrap
this detail away by having the packet_read_line wrapper just
use the buffer transparently and return a pointer to the
static storage. That covers most of the cases, and the
remaining ones already read into their own LARGE_PACKET_MAX
buffers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The packets sent during ref negotiation are all terminated
by newline; even though the code to chomp these newlines is
short, we end up doing it in a lot of places.
This patch teaches packet_read_line to auto-chomp the
trailing newline; this lets us get rid of a lot of inline
chomping code.
As a result, some call-sites which are not reading
line-oriented data (e.g., when reading chunks of packfiles
alongside sideband) transition away from packet_read_line to
the generic packet_read interface. This patch converts all
of the existing callsites.
Since the function signature of packet_read_line does not
change (but its behavior does), there is a possibility of
new callsites being introduced in later commits, silently
introducing an incompatibility. However, since a later
patch in this series will change the signature, such a
commit would have to be merged directly into this commit,
not to the tip of the series; we can therefore ignore the
issue.
This is an internal cleanup and should produce no change of
behavior in the normal case. However, there is one corner
case to note. Callers of packet_read_line have never been
able to tell the difference between a flush packet ("0000")
and an empty packet ("0004"), as both cause packet_read_line
to return a length of 0. Readers treat them identically,
even though Documentation/technical/protocol-common.txt says
we must not; it also says that implementations should not
send an empty pkt-line.
By stripping out the newline before the result gets to the
caller, we will now treat the newline-only packet ("0005\n")
the same as an empty packet, which in turn gets treated like
a flush packet. In practice this doesn't matter, as neither
empty nor newline-only packets are part of git's protocols
(at least not for the line-oriented bits, and readers who
are not expecting line-oriented packets will be calling
packet_read directly, anyway). But even if we do decide to
care about the distinction later, it is orthogonal to this
patch. The right place to tighten would be to stop treating
empty packets as flush packets, and this change does not
make doing so any harder.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is just write_or_die by another name. The one
distinction is that write_or_die will treat EPIPE specially
by suppressing error messages. That's fine, as we die by
SIGPIPE anyway (and in the off chance that it is disabled,
write_or_die will simulate it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code predates prefixcmp, so it used memcmp along with
static sizes. Replacing these memcmps with prefixcmp makes
the code much more readable, and the lack of static sizes
will make refactoring it in future patches simpler.
Note that we used to be unnecessarily liberal in parsing the
"unpack" status line, and would accept "unpack ok\njunk". No
version of git has ever produced that, and it violates the
BNF in Documentation/technical/pack-protocol.txt. Let's take
this opportunity to tighten the check by converting the
prefix comparison into a strcmp.
While we're in the area, let's also fix a vague error
message that does not follow our usual conventions (it
writes directly to stderr and does not use the "error:"
prefix).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we push to update an existing ref, if:
* the object at the tip of the remote is not a commit; or
* the object we are pushing is not a commit,
it won't be correct to suggest to fetch, integrate and push again,
as the old and new objects will not "merge". We should explain that
the push must be forced when there is a non-committish object is
involved in such a case.
If we do not have the current object at the tip of the remote, we do
not even know that object, when fetched, is something that can be
merged. In such a case, suggesting to pull first just like
non-fast-forward case may not be technically correct, but in
practice, most such failures are seen when you try to push your work
to a branch without knowing that somebody else already pushed to
update the same branch since you forked, so "pull first" would work
as a suggestion most of the time. And if the object at the tip is
not a commit, "pull first" will fail, without making any permanent
damage. As a side effect, it also makes the error message the user
will get during the next "push" attempt easier to understand, now
the user is aware that a non-commit object is involved.
In these cases, the current code already rejects such a push on the
client end, but we used the same error and advice messages as the
ones used when rejecting a non-fast-forward push, i.e. pull from
there and integrate before pushing again.
Introduce new rejection reasons and reword the messages
appropriately.
[jc: with help by Peff on message details]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
References are allowed to update from one commit-ish to another if the
former is an ancestor of the latter. This behavior is oriented to
branches which are expected to move with commits. Tag references are
expected to be static in a repository, though, thus an update to
something under refs/tags/ should be rejected unless the update is
forced.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
send_pack() is used by transport.c, part of libgit.a while it stays in
builtin/send-pack.c. Move it to send-pack.c so that we won't get
undefined reference if a program that uses libgit.a happens to pull it
in.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Also marks some more things as const, as needed.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list of remote refs in struct transport should be const, because
builtin-fetch will get confused if it changes.
The url in git_connect should be const (and work on a copy) instead of
requiring the caller to copy it.
match_refs doesn't modify the refspecs it gets.
get_fetch_map and get_remote_ref don't change the list they get.
Allow transport get_refs_list methods to modify the struct transport.
Add a function to copy a list of refs, when a function needs a mutable
copy of a const list.
Add a function to check the type of a ref, as per the code in connect.c
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/forkexec:
Use the asyncronous function infrastructure to run the content filter.
Avoid a dup2(2) in apply_filter() - start_command() can do it for us.
t0021-conversion.sh: Test that the clean filter really cleans content.
upload-pack: Run rev-list in an asynchronous function.
upload-pack: Move the revision walker into a separate function.
Use the asyncronous function infrastructure in builtin-fetch-pack.c.
Add infrastructure to run a function asynchronously.
upload-pack: Use start_command() to run pack-objects in create_pack_file().
Have start_command() create a pipe to read the stderr of the child.
Use start_comand() in builtin-fetch-pack.c instead of explicit fork/exec.
Use run_command() to spawn external diff programs instead of fork/exec.
Use start_command() to run content filters instead of explicit fork/exec.
Use start_command() in git_connect() instead of explicit fork/exec.
Change git_connect() to return a struct child_process instead of a pid_t.
Conflicts:
builtin-fetch-pack.c
* db/fetch-pack: (60 commits)
Define compat version of mkdtemp for systems lacking it
Avoid scary errors about tagged trees/blobs during git-fetch
fetch: if not fetching from default remote, ignore default merge
Support 'push --dry-run' for http transport
Support 'push --dry-run' for rsync transport
Fix 'push --all branch...' error handling
Fix compilation when NO_CURL is defined
Added a test for fetching remote tags when there is not tags.
Fix a crash in ls-remote when refspec expands into nothing
Remove duplicate ref matches in fetch
Restore default verbosity for http fetches.
fetch/push: readd rsync support
Introduce remove_dir_recursively()
bundle transport: fix an alloc_ref() call
Allow abbreviations in the first refspec to be merged
Prevent send-pack from segfaulting when a branch doesn't match
Cleanup unnecessary break in remote.c
Cleanup style nit of 'x == NULL' in remote.c
Fix memory leaks when disconnecting transport instances
Ensure builtin-fetch honors {fetch,transfer}.unpackLimit
...
This prepares the API of git_connect() and finish_connect() to operate on
a struct child_process. Currently, we just use that object as a placeholder
for the pid that we used to return. A follow-up patch will change the
implementation of git_connect() and finish_connect() to make full use
of the object.
Old code had early-return-on-error checks at the calling sites of
git_connect(), but since git_connect() dies on errors anyway, these checks
were removed.
[sp: Corrected style nit of "conn == NULL" to "!conn"]
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Previously, we updated the tracking refs (which match refs we
are pushing) while generating the list of refs to send.
However, at that point we don't know whether the refs were
accepted.
Instead, we now wait until we get a response code from the
server. If an error was indicated, we don't update any local
tracking refs. Technically some refs could have been updated
on the remote, but since the local ref update is just an
optimization to avoid an extra fetch, we are better off
erring on the side of correctness.
The user-visible message is now generated much later in the
program, and has been tweaked to make more sense.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
Document additional 1.5.3.5 fixes in release notes
Avoid 'expr index' on Mac OS X as it isn't supported
filter-branch: update current branch when rewritten
fix filter-branch documentation
helpful error message when send-pack finds no refs in common.
Fix setup_git_directory_gently() with relative GIT_DIR & GIT_WORK_TREE
Correct typos in release notes for 1.5.3.5
There's a number of tricky conflicts between master and
this topic right now due to the rewrite of builtin-push.
Junio must have handled these via rerere; I'd rather not
deal with them again so I'm pre-merging master into the
topic. Besides this topic somehow started to depend on
the strbuf series that was in next, but is now in master.
It no longer compiles on its own without the strbuf API.
* master: (184 commits)
Whip post 1.5.3.4 maintenance series into shape.
Minor usage update in setgitperms.perl
manual: use 'URL' instead of 'url'.
manual: add some markup.
manual: Fix example finding commits referencing given content.
Fix wording in push definition.
Fix some typos, punctuation, missing words, minor markup.
manual: Fix or remove em dashes.
Add a --dry-run option to git-push.
Add a --dry-run option to git-send-pack.
Fix in-place editing functions in convert.c
instaweb: support for Ruby's WEBrick server
instaweb: allow for use of auto-generated scripts
Add 'git-p4 commit' as an alias for 'git-p4 submit'
hg-to-git speedup through selectable repack intervals
git-svn: respect Subversion's [auth] section configuration values
gtksourceview2 support for gitview
fix contrib/hooks/post-receive-email hooks.recipients error message
Support cvs via git-shell
rebase -i: use diff plumbing instead of porcelain
...
Conflicts:
Makefile
builtin-push.c
rsh.c
Implement support for --dry-run, so that it can be used
in calls from git-push. With this flag set, git-send-pack
will not send any updates to the server.
Signed-off-by: Brian Ewins <brian.ewins@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Anyplace we talk about the address of a remote repository we always
refer to it as a URL, especially in the configuration file and
.git/remotes where we call it "remote.$n.url" or start the first
line with "URL:". Calling this value a uri within the internal C
code just doesn't jive well with our commonly accepted terms.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A function intended to be called from builtins updating refs
by locking them before write, specially those that came from
scripts using "git update-ref".
[jc: with minor fixups]
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function for_each_remote() does exactly what the name
suggests.
The function remote_find_tracking() was extended to be able to
search remote refs for a given local ref. The caller sets
either src or dst (but not both) in the refspec parameter, and
remote_find_tracking() will fill in the other and return 0.
Both changes are required for the next step: simplification of
git-branch's --track functionality.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This means that send-pack and http-push will support pattern refspecs,
so builtin-push.c doesn't have to expand them, and also git push can
just turn --tags into "refs/tags/*", further simplifying
builtin-push.c
check_ref_format() gets a third "conditionally okay" result for
something that's valid as a pattern but not as a particular ref.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This also adds a --remote option to send-pack, which specifies the
configured remote being used. It is provided automatically by
git-push, and must match the url (which is still needed, since there
could be multiple urls).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make git notify the user about host resolution/connection attempts.
This is useful both as a progress indicator on slow links, and helps
reassure the user there are no firewall problems.
Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This mechanically converts strncmp() to use prefixcmp(), but only when
the parameters match specific patterns, so that they can be verified
easily. Leftover from this will be fixed in a separate step, including
idiotic conversions like
if (!strncmp("foo", arg, 3))
=>
if (!(-prefixcmp(arg, "foo")))
This was done by using this script in px.perl
#!/usr/bin/perl -i.bak -p
if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) {
s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|;
}
if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) {
s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|;
}
and running:
$ git grep -l strncmp -- '*.c' | xargs perl px.perl
Signed-off-by: Junio C Hamano <junkio@cox.net>
For now it's just to get a more descriptive name. Later we might update the
push protocol to run more than one program on the other end. Moreover this
matches better the corresponding config option remote.<name>. receivepack.
--exec continues to work
Signed-off-by: Uwe Kleine-König <zeisberg@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
add all supported options to Documentation/git-....txt and the usage strings.
Signed-off-by: Uwe Kleine-König <zeisberg@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We recently introduced a write_in_full() which would either write
the specified object or emit an error message and fail. In order
to fix the read side we now want to introduce a read_in_full()
but without an error emit. This patch cleans up the naming
of this family of calls:
1) convert the existing write_or_whine() to write_or_whine_pipe()
to better indicate its pipe specific nature,
2) convert the existing write_in_full() calls to write_or_whine()
to better indicate its nature,
3) introduce a write_in_full() providing a write or fail semantic,
and
4) convert write_or_whine() and write_or_whine_pipe() to use
write_in_full().
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When passing the revisions list to pack-objects we do not check for
errors nor short writes. Introduce a new write_in_full which will
handle short writes and report errors to the caller. Use this to
short cut the send on failure, allowing us to wait for and report
the child in case the failure is its fault.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
send-pack builds a pipeline that runs "rev-list | pack-objects"
and sends the output from pack-objects to the other side, while
feeding the input side of that pipe from itself. However, the
file descriptor that is given to this pipeline (so that it can
be dup2(2)'ed into file descriptor 1 of pack-objects) is closed
by the caller before the complex fork+exec dance! Worse yet,
the caller already dup2's it to 1, so the child process did not
even have to.
I do not understand how this code could possibly have been
working, but it somehow was working by accident.
Merging the sliding mmap() code reveals this problem, presumably
because it keeps one extra file descriptor open for a packfile
and changes the way file descriptors are allocated. I am too
tired to diagnose the problem now, but this seems to be a
sensible fix.
Signed-off-by: Junio C Hamano <junkio@cox.net>
"git push $URL HEAD~6" created a bogus ref HEAD~6 immediately
under $GIT_DIR of the remote repository. While we should keep
refspecs that have arbitrary extended SHA-1 expression on the
source side working (e.g. "HEAD~6:refs/tags/yesterday"), we
should not create bogus ref on the other end.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows you to say
git send-pack $URL :refs/heads/$branch
to delete the named remote branch. The refspec $src:$dst means
replace the destination ref with the object known as $src on the
local side, so this is a natural extension to make an empty $src
mean "No object" to delete the target.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently git-push displays progress status for the local packing of
objects to send, but nothing once it starts to push it over the
connection. Having progress status in that later case is especially
nice when pushing lots of objects over a slow network link.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a "int *flag" parameter to resolve_ref() and makes
for_each_ref() family to call callback function with an extra
"int flag" parameter. They are used to give two bits of
information (REF_ISSYMREF and REF_ISPACKED) about the ref.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a long overdue fix to the API for for_each_ref() family
of functions. It allows the callers to specify a callback data
pointer, so that the caller does not have to use static
variables to communicate with the callback funciton.
The updated for_each_ref() family takes a function of type
int (*fn)(const char *, const unsigned char *, void *)
and a void pointer as parameters, and calls the function with
the name of the ref and its SHA-1 with the caller-supplied void
pointer as parameters.
The commit updates two callers, builtin-name-rev.c and
builtin-pack-refs.c as an example.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we are generating packs to update remote repositories we
want to supply as much information as possible about the revisions
that already exist to rev-list in order optimise the pack as much
as possible. We need to pass two revisions for each branch we are
updating in the remote repository and one for each additional branch.
Where the remote repository has numerous branches we can run out
of command line space to pass them.
Utilise the git-rev-list --stdin mode to allow unlimited numbers
of revision constraints. This allows us to move back to the much
simpler unordered revision selection code.
[jc: added some comments in the code to describe the pipe flow
a bit.]
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This abstracts away the size of the hash values when copying them
from memory location to memory location, much as the introduction
of hashcmp abstracted away hash value comparsion.
A few call sites were using char* rather than unsigned char* so
I added the cast rather than open hashcpy to be void*. This is a
reasonable tradeoff as most call sites already use unsigned char*
and the existing hashcmp is also declared to be unsigned char*.
[jc: Splitted the patch to "master" part, to be followed by a
patch for merge-recursive.c which is not in "master" yet.
Fixed the cast in the latter hunk to combine-diff.c which was
wrong in the original.
Also converted ones left-over in combine-diff.c, diff-lib.c and
upload-pack.c ]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Introduces global inline:
hashcmp(const unsigned char *sha1, const unsigned char *sha2)
Uses memcmp for comparison and returns the result based on the length of
the hash name (a future runtime decision).
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: I needed to hand merge the changes to the updated codebase,
so the result needs to be checked.]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This updates the type-enumeration constants introduced to reduce
the memory footprint of "struct object" to match the type bits
already used in the packfile format, by removing the former
(i.e. TYPE_* constant macros) and using the latter (i.e. enum
object_type) throughout the code for consistency.
Eventually we can stop passing around the "type strings"
entirely, and this will help - no confusion about two different
integer enumeration.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes git-peek-remote able to basically do everything that
git-ls-remote does (but obviously just for the native protocol, so no
http[s]: or rsync: support).
The default behaviour is the same, but you can now give a mixture of
"--refs", "--tags" and "--heads" flags, where "--refs" forces
git-peek-remote to only show real refs (ie none of the fakey tag lookups,
but also not the special pseudo-refs like HEAD and MERGE_HEAD).
The "--tags" and "--heads" flags respectively limit the output to just
regular tags and heads, of course.
You can still also ask to limit them by name too.
You can combine the flags, so
git peek-remote --refs --tags .
will show all local _true_ tags, without the generated tag lookups
(compare the output without the "--refs" flag).
And "--tags --heads" will show both tags and heads, but will avoid (for
example) any special refs outside of the standard locations.
I'm also planning on adding a "--ignore-local" flag that allows us to ask
it to ignore any refs that we already have in the local tree, but that's
an independent thing.
All this is obviously gearing up to making "git fetch" cheaper.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This shrinks "struct object" by a small amount, by getting rid of the
"struct type *" pointer and replacing it with a 3-bit bitfield instead.
In addition, we merge the bitfields and the "flags" field, which
incidentally should also remove a useless 4-byte padding from the object
when in 64-bit mode.
Now, our "struct object" is still too damn large, but it's now less
obviously bloated, and of the remaining fields, only the "util" (which is
not used by most things) is clearly something that should be eventually
discarded.
This shrinks the "git-rev-list --all" memory use by about 2.5% on the
kernel archive (and, perhaps more importantly, on the larger mozilla
archive). That may not sound like much, but I suspect it's more on a
64-bit platform.
There are other remaining inefficiencies (the parent lists, for example,
probably have horrible malloc overhead), but this was pretty obvious.
Most of the patch is just changing the comparison of the "type" pointer
from one of the constant string pointers to the appropriate new TYPE_xxx
small integer constant.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes sure that many commands that take refs on the command
line to honor core.warnambiguousrefs configuration. Earlier,
the commands affected by this patch did not read the
configuration file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Mark Wooding noticed there was a type mismatch warning in git.c; this
patch does things slightly differently (mostly tightening const) and
was what I was holding onto, waiting for the setup-revisions change
to be merged into the master branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/rev-list:
rev-list --objects: use full pathname to help hashing.
rev-list --objects-edge: remove duplicated edge commit output.
rev-list --objects-edge
* jc/pack-thin:
pack-objects: hash basename and direname a bit differently.
pack-objects: allow "thin" packs to exceed depth limits
pack-objects: use full pathname to help hashing with "thin" pack.
pack-objects: thin pack micro-optimization.
Use thin pack transfer in "git fetch".
Add git-push --thin.
send-pack --thin: use "thin pack" delta transfer.
Thin pack - create packfile with missing delta base.
Conflicts:
pack-objects.c (taking "next")
send-pack.c (taking "next")
Stephen C. Tweedie noticed that we give up running rev-list when
we see too many refs on the remote side. Limit the number of
negative references we give to rev-list and continue.
Not sending any negative references to rev-list is very bad --
we may be pushing a ref that is new to the other end.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The new flag loosens the usual "self containedness" requirment
of packfiles, and sends deltified representation of objects when
we know the other side has the base objects needed to unpack
them. This would help reducing the transfer size.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The git suite may not be in PATH (and thus programs such as
git-send-pack could not exec git-rev-list). Thus there is a need for
logic that will locate these programs. Modifying PATH is not
desirable as it result in behavior differing from the user's
intentions, as we may end up prepending "/usr/bin" to PATH.
- git C programs will use exec*_git_cmd() APIs to exec sub-commands.
- exec*_git_cmd() will execute a git program by searching for it in
the following directories:
1. --exec-path (as used by "git")
2. The GIT_EXEC_PATH environment variable.
3. $(gitexecdir) as set in Makefile (default value $(bindir)).
- git wrapper will modify PATH as before to enable shell scripts to
invoke "git-foo" commands.
Ideally, shell scripts should use the git wrapper to become independent
of PATH, and then modifying PATH will not be necessary.
[jc: with minor updates after a brief review.]
Signed-off-by: Michal Ostrowski <mostrows@watson.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This updates the protocol between git-send-pack/git-receive-pack
in a backward compatible way to allow failures at the receiving
end to be propagated back to the sender. Most notably, versions
of git-push before this could not notice if the update hook on
the receiving end refused to update the ref for its own policy
reasons.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Wnen refusing to push a head, we said cryptic "remote 'branch'
object X does not exist on local" or "remote ref 'branch' is not
a strict subset of local ref 'branch'". That was gittish.
Since the most likely reason this happens is because the pushed
head was not up-to-date, clarify the error message to say that
straight, and suggest pulling first.
First noticed by Johannes and seconded by Andreas.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When a push fails (for example when the remote head does not fast forward
to the desired ref) it is not correct to print "Everything up-to-date".
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It used to make sense to have git-send-pack talk about the things it sent
when (a) it was a new program and (b) nobody had a lot of tags and
branches.
These days, it's just distracting to see tons of
'refs/tags/xyz': up-to-date
...
when updating a remote repo.
So shut it up by default, and add a "--verbose" flag for those who really
want to see it.
Also, since this makes he case of everything being up-to-date just totally
silent, make it say "Everything up-to-date" if no refs needed updating.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In case some refs couldn't be pushed out due to an error (mostly the
not-a-proper-subset error), make git-send-pack exit with non-zero status
after the push is over (that is, it still tries to push out the rest
of the refs).
[jc: I adjusted a test for this change.]
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If you try to push into an empty repository with no ref arguments to
git push, it doesn't do anything and doesn't say anything. This adds a
warning when send-pack isn't going to push anything, so you don't
assume that it silently did what you wanted.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
These are whole-tree operations and there is not much point
making them operable from within a subdirectory, but it is easy
to do so, and using setup_git_directory() upfront helps git://
proxy specification picked up from the correct place.
Signed-off-by: Junio C Hamano <junkio@cox.net>
One caller of deref_tag() was not careful enough to make sure
what deref_tag() returned was not NULL (i.e. we found a tag
object that points at an object we do not have). Fix it, and
warn about refs that point at such an incomplete tag where
needed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows the remote side (most notably, upload-pack) to show
additional information without affecting the downloader. Peek-remote
does not ignore them -- this is to make it useful for Pasky's
automatic tag following.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When more than two references need to be checked with
ref_newer() function, the second and later calls did not work
correctly. This was because the later calls found commits
retained by the "struct object" layer that still had smudges
made by earlier calls.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Again I left the v2.6.11-tree tag behind. My bad.
This commit makes sure that we do not barf when pushing a ref
that is a non-commitish tag. You can update a remote ref under
the following conditions:
* You can always use --force.
* Creating a brand new ref is OK.
* If the remote ref is exactly the same as what you are
pushing, it is OK (nothing is pushed).
* You can replace a commitish with another commitish which is a
descendant of it, if you can verify the ancestry between them;
this and the above means you have to have what you are replacing.
* Otherwise you cannot update; you need to use --force.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows git-send-pack to push local refs to a destination
repository under different names.
Here is the name mapping rules for refs.
* If there is no ref mapping on the command line:
- if '--all' is specified, it is equivalent to specifying
<local> ":" <local> for all the existing local refs on the
command line
- otherwise, it is equivalent to specifying <ref> ":" <ref> for
all the refs that exist on both sides.
* <name> is just a shorthand for <name> ":" <name>
* <src> ":" <dst>
push ref that matches <src> to ref that matches <dst>.
- It is an error if <src> does not match exactly one of local
refs.
- It is an error if <dst> matches more than one remote refs.
- If <dst> does not match any remote refs, either
- it has to start with "refs/"; <dst> is used as the
destination literally in this case.
- <src> == <dst> and the ref that matched the <src> must not
exist in the set of remote refs; the ref matched <src>
locally is used as the name of the destination.
For example,
- "git-send-pack --all <remote>" works exactly as before;
- "git-send-pack <remote> master:upstream" pushes local master
to remote ref that matches "upstream". If there is no such
ref, it is an error.
- "git-send-pack <remote> master:refs/heads/upstream" pushes
local master to remote refs/heads/upstream, even when
refs/heads/upstream does not exist.
- "git-send-pack <remote> master" into an empty remote
repository pushes the local ref/heads/master to the remote
ref/heads/master.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When pushing into multi-user repository, or when pushing to a
repository from a local repository that has rebased branches
that has been pruned, the destination repository can have head
commits that are missing from the local repository.
This should not matter as long as the local head of the branch
being pushed is a proper superset of the destination branch, but
we ended up trying to run rev-list telling it to exclude objects
reachable from those heads missing from the local repository,
causing it to barf. Prune those heads from the rev-list
parameter list, and make sure we do not try to push a branch
whose remote head is something we lack.
Signed-off-by: Junio C Hamano <junkio@cox.net>
send-pack had a confusing misfeature that "send-pack --all
master" updated all refs, while "send-pack --all" did not do
anything. Make --all and explicit refs mutually exclusive, and
make sure "send-pack --all" updates all refs.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The check that the source is ahead of the destination incorrectly expects
pop_most_recent_commit() to gracefully handle an empty list.
Fix by just checking the list itself, rather than the return value of the
pop function.
[jc: I did the test script that demonstrated the problem]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This should make sure that if you have multiple people pushing to the
same tree, they cannot overwrite each others work, but have to merge
before being able to update the common reference tree.
This adds documentation for 'smarter push' family of commands.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Cut-and-paste dup noticed by Junio. It's not even harmless, since a
match also causes that match to be invalidated, so this made it
impossible to update an existing branch by name.
I'd only tested the case of "ref doesn't exist at all on the other end",
which worked fine.
The protocol always supported it, but send-pack didn't actually know how
to tell the other side about a new branch/tag.
NOTE! You'll have to name it explicitly on the command line: if you
don't name any branches, git-send-pack will default to the branches that
already exist.
"git_path()" returns a static pathname pointer into the git directory
using a printf-like format specifier.
"head_ref()" works like "for_each_ref()", except for just the HEAD.
This makes the receiver always send a full list of valid refs, which
will allow us to do better packs, as well as handle creation of new
refs. Eventually. Right now we just moved the matching and enabled it.
So now you can do
git-send-pack host:path branch1 branch2
to only send branches "branch1" and "branch2".
This concludes this lesson. I've actually successfully sent an update
using the git-send-pack command.
Probably tons of work still to do, and nasty debugging, but it's now
actually potentially useful.
