"git fetch --prune --tags" is currently interpreted as follows:
* "--tags" is equivalent to specifying a refspec
"refs/tags/*:refs/tags/*", and supersedes any default refspecs
configured via remote.$REMOTE.fetch.
* "--prune" only operates on the refspecs being fetched.
Therefore, "git fetch --prune --tags" prunes tags in refs/tags/* but
does not fetch or prune other references. The fact that this command
does not prune references outside of refs/tags/* was previously
untested. So add a test that verifies the status quo.
However, the status quo is surprising, so it will be changed later in
this patch series.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" was being used with contrived refspecs to create tags and
remote-tracking branches in test repositories in preparation for the
actual tests. This is obscure and also makes one wonder whether this
is indeed just preparation or whether some side-effect of "git fetch"
is being tested.
So use the more straightforward commands "git tag" / "git update-ref"
when preparing branches in test repositories.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix an apparent copy-paste error: A few lines earlier, a tag
"refs/tags/sometag" is created. Check for the (non-)existence of that
tag, not "somebranch", which is otherwise never mentioned in the
script.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cherry-pick" without further options would segfault.
Could use a follow-up to handle '-' after argv[1] better.
* hu/cherry-pick-previous-branch:
cherry-pick: handle "-" after parsing options
Make "git grep" and "git show" pay attention to --textconv when
dealing with blob objects.
* mg/more-textconv:
grep: honor --textconv for the case rev:path
grep: allow to use textconv filters
t7008: demonstrate behavior of grep with textconv
cat-file: do not die on --textconv without textconv filters
show: honor --textconv for blobs
diff_opt: track whether flags have been set explicitly
t4030: demonstrate behavior of show with textconv
Some progress and diagnostic messages from "git clone" were
incorrectly sent to the standard output stream, not to the standard
error stream.
* jk/clone-progress-to-stderr:
clone: always set transport options
clone: treat "checking connectivity" like other progress
clone: send diagnostic messages to stderr
"format-patch --from=<whom>" forgot to omit unnecessary in-body
from line, i.e. when <whom> is the same as the real author.
* jk/format-patch-from:
format-patch: print in-body "From" only when needed
* es/rebase-i-no-abbrev:
rebase -i: fix short SHA-1 collision
t3404: rebase -i: demonstrate short SHA-1 collision
t3404: make tests more self-contained
Conflicts:
t/t3404-rebase-interactive.sh
- Don't start tests with 'test $? = 0' to catch preparation done
outside the test_expect_success block.
- Move writing the bogus patch and the expected output into the
appropriate test_expect_success blocks.
- Use the test_must_fail helper instead of manually checking for
non-zero exit code.
- Use the debug-friendly test_path_is_file helper instead of 'test -f'.
- No space after '>'.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://git.bogomips.org/git-svn:
git-svn: Warn about changing default for --prefix in Git v2.0
Documentation/git-svn: Promote the use of --prefix in docs + examples
git-svn.txt: elaborate on rev_map files
git-svn.txt: replace .git with $GIT_DIR
git-svn.txt: reword description of gc command
git-svn.txt: fix AsciiDoc formatting error
git-svn: fix signed commit parsing
Linux Mint has an implementation of the highlight command (unrelated
to the one from http://www.andre-simon.de) that works as a simple
filter. The script uses 'sed' to add terminal colour escape codes
around text matching a regular expression. When t9500-*.sh attempts
to run "highlight --version", the script simply hangs waiting for
input. (See https://bugs.launchpad.net/linuxmint/+bug/815005).
The tool required by gitweb can be installed from the 'highlight'
package. Unfortunately, given the default $PATH, this leads to the
tool having lower precedence than the script.
In order to avoid hanging the test, add '</dev/null' to the command
line of the highlight invocation. Also, since the 'highlight' tool
requred by gitweb produces '--version' output (and the script does
not), saving the command output allows a simple check for the wrong
'highlight'.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Since 920b691 (clone: refuse to clone if --branch
points to bogus ref) we refuse to clone with option
"-b" if the specified branch does not exist in the
(non-empty) upstream. If the upstream repository is empty,
the branch doesn't exist, either. So refuse the clone too.
Reported-by: Robert Mitwicki <robert.mitwicki@opensoftware.pl>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
mingw_path was introduced in abd4284 to output a mangled path as it is
passed as an argument to main(). But the name is misleading because
mangling does not come from MinGW, but from MSYS [1]. As abd4284 does not
introduce any MSYS or MinGW specific code but just prints out argv[2] as
it is passed to main(), give the function the more generic and less
confusing name "print_path".
[1] http://www.mingw.org/wiki/Posix_path_conversion
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
In Git v2.0, we will change the default --prefix for init/clone from
none/empty to "origin/" (which causes SVN-tracking branches to be
placed at refs/remotes/origin/* instead of refs/remotes/*).
This patch warns users about the upcoming change, both in the git-svn
manual page, and on stderr when running init/clone in the "multi-mode"
without providing a --prefix.
Cc: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
When a test forgets to include && after each command, it is possible
for an early command to succeed but the test to fail, which can hide
bugs.
Checked using the following patch to the test harness:
--- a/t/test-lib.sh
+++ b/t/test-lib.sh
@@ -425,7 +425,17 @@ test_eval_ () {
eval </dev/null >&3 2>&4 "$*"
}
+check_command_chaining_ () {
+ eval >&3 2>&4 "(exit 189) && $*"
+ eval_chain_ret=$?
+ if test "$eval_chain_ret" != 189
+ then
+ error 'bug in test script: missing "&&" in test commands'
+ fi
+}
+
test_run_ () {
+ check_command_chaining_ "$1"
test_cleanup=:
expecting_failure=$2
setup_malloc_check
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Currently, we only try converting argv[1] from "-" into "@{-1}". This
means we do not notice "-" when used together with an option. Worse,
when "git cherry-pick" is run with no options, we segfault. Fix this
by doing the substitution after we have checked that there is
something in argv to cherry-pick and know any remaining options are
meant for the revision-listing machinery.
This still does not handle "-" after the first non-cherry-pick option.
For example,
git cherry-pick foo~2 - bar~5
and
git cherry-pick --no-merges -
will still dump usage.
Reported-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
This test was added, commented out, in fed1b5ca (git-checkout: Test
for relative path use, 2007-11-09). Later git's path handling was
improved (d089ebaa, setup: sanitize absolute and funny paths in
get_pathspec(), 2008-01-28) but we forgot to enable the now-working
test.
This test expects to run from a subdirectory, so add a 'cd'. While
we're here, examine the content of the checked-out file instead of
just checking that it exists. The other checkout tests already do the
same.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
commit 6000334 (clone: allow cloning local paths with colons in them -
2013-05-04) made it possible to specify a path that has colons in it
without file://, e.g. ../foo:bar/somewhere. But the check was a bit
sloppy.
Consider the url '[foo]:bar'. The '[]' unwrapping code will turn the
string to 'foo\0:bar'. In effect this new string is the same as
'foo/:bar' in the check "path < strchrnul(host, '/')", which mistakes
it for a local path (with '/' before the first ':') when it's actually
not.
So disable the check for '/' before ':' when the URL has been mangled
by '[]' unwrapping.
[jn: with tests from Jeff King]
Noticed-by: Morten Stenshorne <mstensho@opera.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
* bc/submodule-status-ignored:
Improve documentation concerning the status.submodulesummary setting
submodule: don't print status output with ignore=all
submodule: fix confusing variable name
* cc/replace-with-the-same-type:
Doc: 'replace' merge and non-merge commits
t6050-replace: use some long option names
replace: allow long option names
Documentation/replace: add Creating Replacement Objects section
t6050-replace: add test to clean up all the replace refs
t6050-replace: test that objects are of the same type
Documentation/replace: state that objects must be of the same type
replace: forbid replacing an object with one of a different type
Instead of typing four capital letters "HEAD", you can say "@" now,
e.g. "git log @".
* fc/at-head:
Add new @ shortcut for HEAD
sha1-name: pass len argument to interpret_branch_name()
"git check-ignore" follows the same rule as "git add" and "git
status" in that the ignore/exclude mechanism does not take effect
on paths that are already tracked. With "--no-index" option, it
can be used to diagnose which paths that should have been ignored
have been mistakenly added to the index.
* dw/check-ignore-sans-index:
check-ignore: Add option to ignore index contents
Give "update-refs" a "--stdin" option to read multiple update
requests and perform them in an all-or-none fashion.
* bk/refs-multi-update:
update-ref: add test cases covering --stdin signature
update-ref: support multiple simultaneous updates
refs: add update_refs for multiple simultaneous updates
refs: add function to repack without multiple refs
refs: factor delete_ref loose ref step into a helper
refs: factor update_ref steps into helpers
refs: report ref type from lock_any_ref_for_update
reset: rename update_refs to reset_refs
Just like "make -C <directory>", make "git -C <directory> ..." to
go there before doing anything else.
* nr/git-cd-to-a-directory:
t0056: "git -C" test updates
git: run in a directory given with -C option
Fix a minor regression in v1.8.3.2 and later that made it
impossible to base your local work on anything but a local branch
of the upstream repository you are tracking from.
* jh/checkout-auto-tracking:
t3200: fix failure on case-insensitive filesystems
branch.c: Relax unnecessary requirement on upstream's remote ref name
t3200: Add test demonstrating minor regression in 41c21f2
Refer to branch.<name>.remote/merge when documenting --track
t3200: Minor fix when preparing for tracking failure
t2024: Fix &&-chaining and a couple of typos
Just like "git checkout -" knows to check out and "git merge -"
knows to merge the branch you were previously on, "git cherry-pick"
now understands "git cherry-pick -" to pick from the previous
branch.
* hu/cherry-pick-previous-branch:
cherry-pick: allow "-" as abbreviation of '@{-1}'
"git status" now omits the prefix to make its output a comment in a
commit log editor, which is not necessary for human consumption.
We may want to tighten the output to omit unnecessary trailing blank
lines, but that does not have to be in the scope of this series.
* mm/status-without-comment-char:
t7508: avoid non-portable sed expression
status: add missing blank line after list of "other" files
tests: don't set status.displayCommentPrefix file-wide
status: disable display of '#' comment prefix by default
submodule summary: ignore --for-status option
wt-status: use argv_array API
builtin/stripspace.c: fix broken indentation
Make "foo^{tag}" to peel a tag to itself, i.e. no-op., and fail if
"foo" is not a tag. "git rev-parse --verify v1.0^{tag}" would be a
more convenient way to say "test $(git cat-file -t v1.0) = tag".
* rh/peeling-tag-to-tag:
peel_onion: do not assume length of x_type globals
peel_onion(): add support for <rev>^{tag}
"git branch -v -v" (and "git status") did not distinguish among a
branch that does not build on any other branch, a branch that is in
sync with the branch it builds on, and a branch that is configured
to build on some other branch that no longer exists.
* jx/branch-vv-always-compare-with-upstream:
status: always show tracking branch even no change
branch: report invalid tracking branch as gone
When there is no sufficient overlap between old and new history
during a fetch into a shallow repository, we unnecessarily sent
objects the sending side knows the receiving end has.
* nd/fetch-into-shallow:
Add testcase for needless objects during a shallow fetch
list-objects: mark more commits as edges in mark_edges_uninteresting
list-objects: reduce one argument in mark_edges_uninteresting
upload-pack: delegate rev walking in shallow fetch to pack-objects
shallow: add setup_temporary_shallow()
shallow: only add shallow graft points to new shallow file
move setup_alternate_shallow and write_shallow_commits to shallow.c
Commit 05c1eb1 (push: teach --force-with-lease to smart-http
transport) fixed the compare-and-swap test in t5541. It
tried to mark the test as passing by teaching the test
helper function to expect an extra "success or failure"
parameter, but forgot to actually use the parameter in the
helper.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a908047 taught format-patch the "--from" option,
which places the author ident into an in-body from header,
and uses the committer ident in the rfc822 from header. The
documentation claims that it will omit the in-body header
when it is the same as the rfc822 header, but the code never
implemented that behavior.
This patch completes the feature by comparing the two idents
and doing nothing when they are the same (this is the same
as simply omitting the in-body header, as the two are by
definition indistinguishable in this case). This makes it
reasonable to turn on "--from" all the time (if it matches
your particular workflow), rather than only using it when
exporting other people's patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of repeating the text to record as the commit log message
and string we expect to see in "log" output, use the same variable
to avoid them going out of sync.
Use different names for test files in different directories to
improve our chance to catch future breakages that makes "-C <dir>"
go to a place that is different from what was specified.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of git's traversals are robust against minor breakages
in commit data. For example, "git log" will still output an
entry for a commit that has a broken encoding or missing
author, and will not abort the whole operation.
Shortlog, on the other hand, will die as soon as it sees a
commit without an author, meaning that a repository with
a broken commit cannot get any shortlog output at all.
Let's downgrade this fatal error to a warning, and continue
the operation.
We simply ignore the commit and do not count it in the total
(since we do not have any author under which to file it).
Alternatively, we could output some kind of "<empty>" record
to collect these bogus commits. It is probably not worth it,
though; we have already warned to stderr, so the user is
aware that such bogosities exist, and any placeholder we
came up with would either be syntactically invalid, or would
potentially conflict with real data.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A clone will always create a transport struct, whether we
are cloning locally or using an actual protocol. In the
local case, we only use the transport to get the list of
refs, and then transfer the objects out-of-band.
However, there are many options that we do not bother
setting up in the local case. For the most part, these are
noops, because they only affect the object-fetching stage
(e.g., the --depth option). However, some options do have a
visible impact. For example, giving the path to upload-pack
via "-u" does not currently work for a local clone, even
though we need upload-pack to get the ref list.
We can just drop the conditional entirely and set these
options for both local and non-local clones. Rather than
keep track of which options impact the object versus the ref
fetching stage, we can simply let the noops be noops (and
the cost of setting the options in the first place is not
high).
The one exception is that we also check that the transport
provides both a "get_refs_list" and a "fetch" method. We
will now be checking the former for both cases (which is
good, since a transport that cannot fetch refs would not
work for a local clone), and we tweak the conditional to
check for a "fetch" only when we are non-local.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When stderr does not point to a tty, we typically suppress
"we are now in this phase" progress reporting (e.g., we ask
the server not to send us "counting objects" and the like).
The new "checking connectivity" message is in the same vein,
and should be suppressed. Since clone relies on the
transport code to make the decision, we can simply sneak a
peek at the "progress" field of the transport struct. That
properly takes into account both the verbosity and progress
options we were given, as well as the result of isatty().
Note that we do not set up that progress flag for a local
clone, as we do not fetch using the transport at all. That's
acceptable here, though, because we also do not perform a
connectivity check in that case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
