The verify_bundle() method checks two things for a bundle's
prerequisites:
1. Are these objects in the object store?
2. Are these objects reachable from our references?
In this second question, multiple uses of verify_bundle() in the same
process can report an invalid bundle even though it is correct. The
reason is due to not clearing all of the commit marks on the commits
previously walked.
The revision walk machinery was first introduced in-process by
fb9a54150d (git-bundle: avoid fork() in verify_bundle(), 2007-02-22).
This implementation used "-1" as the set of flags to clear. The next
meaningful change came in 2b064697a5 (revision traversal: retire
BOUNDARY_SHOW, 2007-03-05), which introduced the PREREQ_MARK flag
instead of a flag normally controlled by the revision-walk machinery.
In 86a0a408b9 (commit: factor out
clear_commit_marks_for_object_array, 2011-10-01), the loop over the
array of commits was replaced with a new
clear_commit_marks_for_object_array(), but simultaneously the "-1" value
was replaced with "ALL_REV_FLAGS", which stopped un-setting the
PREREQ_MARK flag. This means that if multiple commits were marked by the
PREREQ_MARK in a previous run of verify_bundle(), then this loop could
terminate early due to 'i' going to zero:
while (i && (commit = get_revision(&revs)))
if (commit->object.flags & PREREQ_MARK)
i--;
The flag clearing work was changed again in 63647391e6 (bundle: avoid
using the rev_info flag leak_pending, 2017-12-25), but that was only
cosmetic and did not change the behavior.
It may seem that it would be sufficient to add the PREREQ_MARK flag to
the clear_commit_marks() call in its current location. However, we
actually need to do it in the "cleanup:" step, since the first loop
checking "Are these objects in the object store?" might add the
PREREQ_MARK flag to some objects and then terminate without performing a
walk due to one missing object. By clearing the flags in all cases, we
avoid this issue when running verify_bundle() multiple times in the same
process.
Moving this loop to the cleanup step alone would cause a segfault when
running 'git bundle verify' outside of a repository, but this is because
of that error condition using "goto cleanup" when returning is perfectly
safe. Nothing has been initialized at that point, so we can return
immediately without causing any leaks.
This behavior is verified carefully by a test that will be added soon
when Git learns to download bundle lists in a 'git clone --bundle-uri'
command.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next change will start allowing us to parse bundle lists that are
downloaded from a provided bundle URI. Those lists might point to other
lists, which could proceed to an arbitrary depth (and even create
cycles). Restructure fetch_bundle_uri() to have an internal version that
has a recursion depth. Compare that to a new max_bundle_uri_depth
constant that is twice as high as we expect this depth to be for any
legitimate use of bundle list linking.
We can consider making max_bundle_uri_depth a configurable value if
there is demonstrated value in the future.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a bundle provider wants to operate independently from a Git remote,
they want to provide a single, consistent URI that users can use in
their 'git clone --bundle-uri' commands. At this point, the Git client
expects that URI to be a single bundle that can be unbundled and used to
bootstrap the rest of the clone from the Git server. This single bundle
cannot be re-used to assist with future incremental fetches.
To allow for the incremental fetch case, teach Git to understand a
bundle list that could be advertised at an independent bundle URI. Such
a bundle list is likely to be inspected by human readers, even if only
by the bundle provider creating the list. For this reason, we can take
our expected "key=value" pairs and instead format them using Git config
format.
Create bundle_uri_parse_config_format() to parse a file in config format
and convert that into a 'struct bundle_list' filled with its
understanding of the contents.
Be careful to use error_action CONFIG_ERROR_ERROR when calling
git_config_from_file_with_options() because the default action for
git_config_from_file() is to die() on a parsing error. The current
warning isn't particularly helpful if it arises to a user, but it will
be made more verbose at a higher layer later.
Update 'test-tool bundle-uri' to take this config file format as input.
It uses a filename instead of stdin because there is no existing way to
parse a FILE pointer in the config machinery. Using
git_config_from_mem() is overly complicated and more likely to introduce
bugs than this simpler version.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new 'test-tool bundle-uri' test helper. This helper will assist
in testing logic deep in the bundle URI feature.
This change introduces the 'parse-key-values' subcommand, which parses
an input file as a list of lines. These are fed into
bundle_uri_parse_line() to test how we construct a 'struct bundle_list'
from that data. The list is then output to stdout as if the key-value
pairs were a Git config file.
We use an input file instead of stdin because of a future change to
parse in config-file format that works better as an input file.
Co-authored-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When advertising a bundle list over Git's protocol v2, we will use
packet lines. Each line will be of the form "key=value" representing a
bundle list. Connect the API necessary for Git's transport to the
key-value pair parsing created in the previous change.
We are not currently implementing this protocol v2 functionality, but
instead preparing to expose this parsing to be unit-testable.
Co-authored-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There will be two primary ways to advertise a bundle list: as a list of
packet lines in Git's protocol v2 and as a config file served from a
bundle URI. Both of these fundamentally use a list of key-value pairs.
We will use the same set of key-value pairs across these formats.
Create a new bundle_list_update() method that is currently unusued, but
will be used in the next change. It inspects each key to see if it is
understood and then applies it to the given bundle_list. Here are the
keys that we teach Git to understand:
* bundle.version: This value should be an integer. Git currently
understands only version 1 and will ignore the list if the version is
any other value. This version can be increased in the future if we
need to add new keys that Git should not ignore. We can add new
"heuristic" keys without incrementing the version.
* bundle.mode: This value should be one of "all" or "any". If this
mode is not understood, then Git will ignore the list. This mode
indicates whether Git needs all of the bundle list items to make a
complete view of the content or if any single item is sufficient.
The rest of the keys use a bundle identifier "<id>" as part of the key
name. Keys using the same "<id>" describe a single bundle list item.
* bundle.<id>.uri: This stores the URI of the bundle item. This
currently is expected to be an absolute URI, but will be relaxed to be
a relative URI in the future.
While parsing, return an error if a URI key is repeated, since we can
make that restriction with bundle lists.
Make the git_parse_int() method global so we can parse the integer
version value carefully.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It will likely be rare where a user uses a single bundle URI and expects
that URI to point to a bundle. Instead, that URI will likely be a list
of bundles provided in some format. Alternatively, the Git server could
advertise a list of bundles.
In anticipation of these two ways of advertising multiple bundles,
create a data structure that represents such a list. This will be
populated using a common API, but for now focus on what data can be
represented.
Each list contains a number of remote_bundle_info structs. These contain
an 'id' that is used to uniquely identify them in the list, and also a
'uri' that contains the location of its data. Finally, there is a strbuf
containing the filename used when Git downloads the contents to disk.
The list itself stores these remote_bundle_info structs in a hashtable
using 'id' as the key. The order of the structs in the input is
considered unimportant, but future modifications to the format and these
data structures will place ordering possibilities on the set. The list
also has a few "global" properties, including the version (used when
parsing the list) and the mode. The mode is one of these two options:
1. BUNDLE_MODE_ALL: all listed URIs are intended to be combined
together. The client should download all of the advertised data to
have a complete copy of the data.
2. BUNDLE_MODE_ANY: any one listed item is sufficient to have a complete
copy of the data. The client can choose arbitrarily from these
options. In the future, the client may use pings to find the closest
URI among geodistributed replicas, or use some other heuristic
information added to the format.
This API is currently unused, but will soon be expanded with parsing
logic and then be consumed by the bundle URI download logic.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The find_temp_filename() method was created in 53a50892be (bundle-uri:
create basic file-copy logic, 2022-08-09) and uses odb_mkstemp() to
create a temporary filename. The odb_mkstemp() method uses a strbuf in
its interface, but we do not need to continue carrying a strbuf
throughout the bundle URI code.
Convert the find_temp_filename() method to use a 'char *' and modify its
only caller. This makes sense that we don't actually need to modify this
filename directly later, so using a strbuf is overkill.
This change will simplify the data structure for tracking a bundle list
to use plain strings instead of strbufs.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The codepath to sign learned to report errors when it fails to read
from "ssh-keygen".
* pw/ssh-sign-report-errors:
ssh signing: return an error when signature cannot be read
Fix a logic in "mailinfo -b" that miscomputed the length of a
substring, which lead to an out-of-bounds access.
* pw/mailinfo-b-fix:
mailinfo -b: fix an out of bounds access
Force C locale while running tests around httpd to make sure we can
find expected error messages in the log.
* rs/test-httpd-in-C-locale:
t/lib-httpd: pass LANG and LC_ALL to Apache
Per 33665d98e6 (reftable: make assignments portable to AIX xlc
v12.01, 2022-03-28) forms like ".a.b = *c" can be replaced by using
".a = { .b = *c }" instead.
We'll probably allow these sooner than later, but since the workaround
is trivial let's note it among the C99 features we'd like to hold off
on for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 79d3696cfb (git-grep: boolean expression on pattern matching.,
2006-06-30) the "pattern_expression" member has been used for complex
queries (AND/OR...), with "pattern_list" being used for the simple OR
queries. Since then we've used both "pattern_expression" and its
associated boolean "extended" member to see if we have a complex
expression.
Since f41fb662f5 (revisions API: have release_revisions() release
"grep_filter", 2022-04-13) we've had a subtle bug relating to that: If
we supplied options that were only used for "complex queries", but
didn't supply the query itself we'd set "opt->extended", but would
have a NULL "pattern_expression". As a result these would segfault as
we tried to call "free_grep_patterns()" from "release_revisions()":
git -P log -1 --invert-grep
git -P log -1 --all-match
The root cause of this is that we were conflating the state management
we needed in "compile_grep_patterns()" itself with whether or not we
had an "opt->pattern_expression" later on.
In this cases as we're going through "compile_grep_patterns()" we have
no "opt->pattern_list" but have "opt->no_body_match" or
"opt->all_match". So we'd set "opt->extended = 1", but not "return" on
"opt->extended" as that's an "else if" in the same "if" statement.
That behavior is intentional and required, as the common case is that
we have an "opt->pattern_list" that we're about to parse into the
"opt->pattern_expression".
But we don't need to keep track of this "extended" flag beyond the
state management in compile_grep_patterns() itself. It needs it, but
once we're out of that function we can rely on
"opt->pattern_expression" being non-NULL instead for using these
extended patterns.
As 79d3696cfb itself shows we've assumed that there's a one-to-one
mapping between the two since the very beginning. I.e. "match_line()"
would check "opt->extended" to see if it should call "match_expr()",
and the first thing we do in that function is assume that we have a
"opt->pattern_expression". We'd then call "match_expr_eval()", which
would have died if that "opt->pattern_expression" was NULL.
The "die" was added in c922b01f54 (grep: fix segfault when "git grep
'('" is given, 2009-04-27), and can now be removed as it's now clearly
unreachable. We still do the right thing in the case that prompted
that fix:
git grep '('
fatal: unmatched parenthesis
Arguably neither the "--invert-grep" option added in [1] nor the
earlier "--all-match" option added in [2] were intended to be used
stand-alone, and another approach[3] would be to error out in those
cases. But since we've been treating them as a NOOP when given without
--grep for a long time let's keep doing that.
We could also return in "free_pattern_expr()" if the argument is
non-NULL, as an alternative fix for this segfault does [4]. That would
be more elegant in making the "free_*()" function behave like
"free()", but it would also remove a sanity check: The
"free_pattern_expr()" function calls itself recursively, and only the
top-level is allowed to be NULL, let's not conflate those two
conditions.
1. 22dfa8a23d (log: teach --invert-grep option, 2015-01-12)
2. 0ab7befa31 (grep --all-match, 2006-09-27)
3. https://lore.kernel.org/git/patch-1.1-f4b90799fce-20221010T165711Z-avarab@gmail.com/
4. http://lore.kernel.org/git/7e094882c2a71894416089f894557a9eae07e8f8.1665423686.git.me@ttaylorr.com
Reported-by: orygaw <orygaw@protonmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
94bc671a1f (Add directory pattern matching to attributes, 2012-12-08)
moved the code for adding the trailing slash to names of directories and
submodules up. This left both branches of the if statement starting
with the same conditional fprintf call. Deduplicate it.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fsm_settings__get_incompatible_msg() function returns an allocated
string. So we can't pass its result directly to warning(); we must hold
on to the pointer and free it to avoid a leak.
The leak here is small and fixed size, but Coverity complained, and
presumably SANITIZE=leaks would eventually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
branch command with options "edit-description", "set-upstream-to" and
"unset-upstream" expects a branch name. Since ae5a6c3684 (checkout:
implement "@{-N}" shortcut name for N-th last branch, 2009-01-17) a
branch can be specified using shortcuts like @{-1}. Those shortcuts
need to be resolved when considering the arguments.
We can modify the description of the previously checked out branch with:
$ git branch --edit--description @{-1}
We can modify the upstream of the previously checked out branch with:
$ git branch --set-upstream-to upstream @{-1}
$ git branch --unset-upstream @{-1}
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The C99 section of the CodingGuidelines is a good overview of what we
can use, but is sorely lacking in what we can't use. Something that
comes up occasionally is the portability of %z.
Per [1] we couldn't use it for the longest time due to MSVC not
supporting it, but nowadays by requiring C99 we rely on the MSVC
version that does, but we can't use it yet because a C library that
MinGW uses doesn't support it.
1. https://lore.kernel.org/git/a67e0fd8-4a14-16c9-9b57-3430440ef93c@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 44ba10d671 (revision: use C99 declaration of variable in for()
loop, 2021-11-14) released with v2.35.0 we've had a variable declared
with in a for loop.
Since then we've had inadvertent follow-ups to that with at least
cb2607759e (merge-ort: store more specific conflict information,
2022-06-18) released with v2.38.0.
As November 2022 is within the window of this upcoming release,
let's update the guideline to allow this. We can have the promised
"revisit" discussion while this patch cooks, and drop it if it turns
out that it is still premature, which is not expected to happen at
this moment.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first use of variables in initializer elements appears to have
been 2b6854c863 (Cleanup variables in cat-file, 2007-04-21) released
with v1.5.2.
Some of those caused portability issues, and e.g. that "cat-file" use
was changed in 66dbfd55e3 (Rewrite dynamic structure initializations
to runtime assignment, 2010-05-14) which went out with v1.7.2.
But curiously 66dbfd55e3 missed some of them, e.g. an archive.c use
added in d5f53d6d6f (archive: complain about path specs that don't
match anything, 2009-12-12), and another one in merge-index.c (later
builtin/merge-index.c) in 0077138cd9 (Simplify some instances of
run_command() by using run_command_v_opt()., 2009-06-08).
As far as I can tell there's been no point since 2b6854c863 in 2007
where a compiler that didn't support this has been able to compile
git. Presumably 66dbfd55e3 was an attempt to make headway with wider
portability that ultimately wasn't completed.
In any case, we are thoroughly reliant on this syntax at this point,
so let's update the guidelines, see
https://lore.kernel.org/git/xmqqy1tunjgp.fsf@gitster.g/ for the
initial discussion.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 7bc341e21b (git-compat-util: add a test balloon for C99
support, 2021-12-01) we've had a hard dependency on C99, but the prose
in CodingGuidelines was written under the assumption that we were
using C89 with a few C99 features.
As the updated prose notes we'd still like to hold off on novel C99
features, but let's make it clear that we target that C version, and
then enumerate new C99 features that are safe to use.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase --preserve-merges no longer exists so there is no point in
carrying this failing test case.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the "-Wno-missing-braces" option when building with an old version
of clang to suppress the "suggest braces around initialization" error
in developer mode.
For example, using an old version of clang gives the following errors
(when in DEVELOPER=1 mode):
$ make builtin/merge-file.o
CC builtin/merge-file.o
builtin/merge-file.c:29:23: error: suggest braces around initialization \
of subobject [-Werror,-Wmissing-braces]
mmfile_t mmfs[3] = { 0 };
^
{}
builtin/merge-file.c:31:20: error: suggest braces around initialization \
of subobject [-Werror,-Wmissing-braces]
xmparam_t xmp = { 0 };
^
{}
2 errors generated.
This example compiles without error/warning with updated versions of
clang. Since this is an obsolete error, use the -Wno-missing-braces
option to silence the warning when using an older compiler. This
avoids the need to update the code to use "{{0}}" style
initializations.
Upstream clang version 8 has the problem. It was fixed in version 9.
The version of clang distributed by Apple with XCode has its own
unique set of version numbers. Apple clang version 11 has the
problem. It was fixed in version 12.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In read-only repositories, "git merge-tree" tried to come up with a
merge result tree object, which it failed (which is not wrong) and
led to a segfault (which is bad), which has been corrected.
* js/merge-ort-in-read-only-repo:
merge-ort: return early when failing to write a blob
merge-ort: fix segmentation fault in read-only repositories
"git multi-pack-index repack/expire" used to repack unreachable
cruft into a new pack, which have been corrected.
* tb/midx-repack-ignore-cruft-packs:
midx.c: avoid cruft packs with non-zero `repack --batch-size`
midx.c: remove unnecessary loop condition
midx.c: replace `xcalloc()` with `CALLOC_ARRAY()`
midx.c: avoid cruft packs with `repack --batch-size=0`
midx.c: prevent `expire` from removing the cruft pack
Documentation/git-multi-pack-index.txt: clarify expire behavior
Documentation/git-multi-pack-index.txt: fix typo
"git rebase -i" can mistakenly attempt to apply a fixup to a commit
itself, which has been corrected.
* ja/rebase-i-avoid-amending-self:
sequencer: avoid dropping fixup commit that targets self via commit-ish
Documentation on various Boolean GIT_* environment variables have
been clarified.
* jc/environ-docs:
environ: GIT_INDEX_VERSION affects not just a new repository
environ: simplify description of GIT_INDEX_FILE
environ: GIT_FLUSH should be made a usual Boolean
environ: explain Boolean environment variables
environ: document GIT_SSL_NO_VERIFY
"git grep" learned to expand the sparse-index more lazily and on
demand in a sparse checkout.
* sy/sparse-grep:
builtin/grep.c: integrate with sparse index
"scalar unregister" in a repository that is already been
unregistered reported an error.
* ds/scalar-unregister-idempotent:
string-list: document iterator behavior on NULL input
gc: replace config subprocesses with API calls
scalar: make 'unregister' idempotent
maintenance: add 'unregister --force'
Most credential helpers ignored unknown entries in a credential
description, but a few died upon seeing them. The latter were
taught to ignore them, too
* mc/cred-helper-ignore-unknown:
osxkeychain: clarify that we ignore unknown lines
netrc: ignore unknown lines (do not die)
wincred: ignore unknown lines (do not die)
"git remote rename" failed to rename a remote without fetch
refspec, which has been corrected.
* jk/remote-rename-without-fetch-refspec:
remote: handle rename of remote without fetch refspec
"git clone" did not like to see the "--bare" and the "--origin"
options used together without a good reason.
* jk/clone-allow-bare-and-o-together:
clone: allow "--bare" with "-o"
"git fsck" failed to release contents of tree objects already used
from the memory, which has been fixed.
* jk/fsck-on-diet:
parse_object_buffer(): respect save_commit_buffer
fsck: turn off save_commit_buffer
fsck: free tree buffers after walking unreachable objects
Suppose you are managing many maintenance tracks in your project,
and some of the more recent ones are maint-2.36 and maint-2.37.
Further imagine that your project recently tagged the official 2.38
release, which means you would need to start maint-2.38 track soon,
by doing:
$ git checkout -b maint-2.38 v2.38.0^0
$ git branch --list 'maint-2.3[6-9]'
* maint-2.38
maint-2.36
maint-2.37
So far, so good. But it also is reasonable to want not to have to
worry about which maintenance track is the latest, by pointing a
more generic-sounding 'maint' branch at it, by doing:
$ git symbolic-ref refs/heads/maint refs/heads/maint-2.38
which would allow you to say "whichever it is, check out the latest
maintenance track", by doing:
$ git checkout maint
$ git branch --show-current
maint-2.38
It is arguably better to say that we are on 'maint-2.38' rather than
on 'maint', and "git merge/pull" would record "into maint-2.38" and
not "into maint", so I think what we have is a good behaviour.
One thing that is slightly irritating, however, is that I do not
think there is a good way (other than "cat .git/HEAD") to learn that
you checked out 'maint' to get into that state. Just like the output
of "git branch --show-current" shows above, "git symbolic-ref HEAD"
would report 'refs/heads/maint-2.38', bypassing the intermediate
symbolic ref at 'refs/heads/maint' that is pointed at by HEAD.
The internal resolve_ref() API already has the necessary support for
stopping after resolving a single level of a symbolic-ref, and we
can expose it by adding a "--[no-]recurse" option to the command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check for an error condition whose body unconditionally exists
first, and then perform the special casing of "version" and "help"
as part of the preparation for the "normal codepath". This makes
the code simpler to read.
Signed-off-by: Daniel Sonbolian <dsal3389@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call fspathncmp() instead of open-coding it. This shortens the code and
makes it less repetitive.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the repository does not yet have commits, some errors describe that
there is no branch:
$ git init -b first
$ git branch --edit-description first
error: No branch named 'first'.
$ git branch --set-upstream-to=upstream
fatal: branch 'first' does not exist
$ git branch -c second
error: refname refs/heads/first not found
fatal: Branch copy failed
That "first" branch is unborn but to say it doesn't exists is confusing.
Options "-c" (copy) and "-m" (rename) show the same error when the
origin branch doesn't exists:
$ git branch -c non-existent-branch second
error: refname refs/heads/non-existent-branch not found
fatal: Branch copy failed
$ git branch -m non-existent-branch second
error: refname refs/heads/non-existent-branch not found
fatal: Branch rename failed
Note that "--edit-description" without an explicit argument is already
considering the _empty repository_ circumstance in its error. Also note
that "-m" on the initial branch it is an allowed operation.
Make the error descriptions for those branch operations with unborn or
non-existent branches, more informative.
This is the result of the change:
$ git init -b first
$ git branch --edit-description first
error: No commit on branch 'first' yet.
$ git branch --set-upstream-to=upstream
fatal: No commit on branch 'first' yet.
$ git branch -c second
fatal: No commit on branch 'first' yet.
$ git branch [-c/-m] non-existent-branch second
fatal: No branch named 'non-existent-branch'.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The version numbers do not mean much, but we may want to call the
first one in 2023 version 3.1 or something, but let's just increment
the second digit from the previous one for this cycle.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
