The logic for the -b mode, where [PATCH] is dropped but [foo] is not,
silently ate all spaces after the ].
Fix this by keeping the next isspace() character, if there is any.
Being more thorough is pointless, as the later cleanup_space() call
will normalize any sequence of whitespace to a single ' '.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am could pass -k to mailinfo, but not -b. Introduce an option
that does so. We change the meaning of the 'keep' state file, but are
careful not to cause a problem unless you downgrade in the middle of
an 'am' run.
This uncovers a bug in mailinfo -b, hence the failing test.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pathspec structure has a few bits of data to drive various operation
modes after we unified the pathspec matching logic in various codepaths.
For example, max_depth field is there so that "git grep" can limit the
output for files found in limited depth of tree traversal. Also in order
to show just the surface level differences in "git diff-tree", recursive
field stops us from descending into deeper level of the tree structure
when it is set to false, and this also affects pathspec matching when
we have wildcards in the pathspec.
The diff-index has always wanted the recursive behaviour, and wanted to
match pathspecs without any depth limit. But we forgot to do so when we
updated tree_entry_interesting() logic to unify the pathspec matching
logic.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The word-diff logic accumulates + and - lines until another line type
appears (normally [ @\]), at which point it generates the word diff.
This is usually correct, but it breaks when the preimage does not have
a newline at EOF:
$ printf "%s" "a a a" >a
$ printf "%s\n" "a ab a" >b
$ git diff --no-index --word-diff a b
diff --git 1/a 2/b
index 9f68e94..6a7c02f 100644
--- 1/a
+++ 2/b
@@ -1 +1 @@
[-a a a-]
No newline at end of file
{+a ab a+}
Because of the order of the lines in a unified diff
@@ -1 +1 @@
-a a a
\ No newline at end of file
+a ab a
the '\' line flushed the buffers, and the - and + lines were never
matched with each other.
A proper fix would defer such markers until the end of the hunk.
However, word-diff is inherently whitespace-ignoring, so as a cheap
fix simply ignore the marker (and hide it from the output).
We use a prefix match for '\ ' to parallel the logic in
apply.c:parse_fragment(). We currently do not localize this string
(just accept other variants of it in git-apply), but this should be
future-proof.
Noticed-by: Ivan Shirokoff <shirokoff@yandex-team.ru>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For details, see the commit message of 4114156ae9. Note that while using
$PWD as part of GIT_DIR is not required here, it does no harm and it is
more consistent. In addition, on MSYS using an environment variable should
be slightly faster than spawning an external executable.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce new tests that look more closely at overlay situations
when there are conflicting files. Five of these are broken.
Document the brokenness.
This is a fundamental problem with how git-p4 only "borrows" a
client spec. At some sync operation, a new change can contain
a file which is already in the repo or explicitly deleted through
another mapping. To sort this out would involve listing all the
files in the client spec to find one with a higher priority.
While this is not too hard for the initial import, subsequent
sync operations would be very costly.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test relied on what now is seen as broken behavior
in --use-client-spec. Change it to make sure it works
according to the new behavior as described in
ecb7cf9 (git-p4: rewrite view handling, 2012-01-02) and
c700b68 (git-p4: test client view handling, 2012-01-02).
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Catch the case where a ... exists at the end, and also elsehwere.
Reported-by: Gary Gibbons <ggibbons@perforce.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add commit message to avoid commit's aborting due to the lack of
commit message, not because there are INTENT_TO_ADD entries in index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we prepare the attribute stack for a lookup on a path,
we start with the cached stack from the previous lookup
(because it is common to do several lookups in the same
directory hierarchy). So the first thing we must do in
preparing the stack is to pop any entries that point to
directories we are no longer interested in.
For example, if our stack contains gitattributes for:
foo/bar/baz
foo/bar
foo
but we want to do a lookup in "foo/bar/bleep", then we want
to pop the top element, but retain the others.
To do this we walk down the stack from the top, popping
elements that do not match our lookup directory. However,
the test do this simply checked strncmp, meaning we would
mistake "foo/bar/baz" as a leading directory of
"foo/bar/baz_plus". We must also check that the character
after our match is '/', meaning we matched the whole path
component.
There are two special cases to consider:
1. The top of our attr stack has the empty path. So we
must not check for '/', but rather special-case the
empty path, which always matches.
2. Typically when matching paths in this way, you would
also need to check for a full string match (i.e., the
character after is '\0'). We don't need to do so in
this case, though, because our path string is actually
just the directory component of the path to a file
(i.e., we know that it terminates with "/", because the
filename comes after that).
Helped-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In test 'blame --textconv with local changes' of t8006-blame-textconv,
using /usr/xpg4/bin/sed (as set by SANE_TOOL_PATH), an additional
newline was added to the output from the 'helper' script.
This was noted by sed with a message such as:
sed: Missing newline at end of file zero.bin.
Sed then exits with status 2 causing the helper script to also exit
with status 2.
In turn, this was triggering a fatal error from git blame:
fatal: unable to read files to diff
To work around this difference in sed behaviour, use perl -p instead
of sed -e as it exits cleanly and does not insert the additional
newline.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When gitweb URL does not provide action explicitly, e.g.
http://git.example.org/repo.git/branch
dispatch() tries to guess action (view to be used) based on remaining
parameters. Among others it is based on the type of requested object,
which gave problems when asking for non-existent branch or file (for
example misspelt name).
Now undefined $action from dispatch() should not result in problems.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In start_daemon, git-daemon is started as a background process. In
theory, the tests may try to connect before the daemon had a chance
to open a listening socket. Avoid this race condition by waiting
for it to output "Ready to rumble". Any other output is considered
an error and the test is aborted.
Should git-daemon produce no output at all, lib-git-daemon would
block forever. This could be fixed by introducing a timeout. On
the other hand, we have no timeout for other git commands which
could suffer from the same problem. Since such a mechanism adds
some complexity, I have decided against it.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The semantics of the git daemon tests are similar to the http transport
tests. In fact, they are only a slightly modified copy of t5550, plus the
newly added remote error tests.
All git-daemon tests will be skipped unless the environment variable
GIT_TEST_GIT_DAEMON is set.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
lib-terminal.sh runs a test and thus increases the test count, but the
output is lost so that TAP produces a "no plan found error".
Move the lib-terminal call after the lib-httpd and make TAP happy
(though still leave me clueless).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, git push --quiet produces some non-error output, e.g.:
$ git push --quiet
Unpacking objects: 100% (3/3), done.
This fixes a bug reported for the fedora git package:
https://bugzilla.redhat.com/show_bug.cgi?id=725593
Reported-by: Jesse Keating <jkeating@redhat.com>
Cc: Todd Zullinger <tmz@pobox.com>
Commit 90a6c7d4 (propagate --quiet to send-pack/receive-pack)
introduced the --quiet option to receive-pack and made send-pack
pass that option. Older versions of receive-pack do not recognize
the option, however, and terminate immediately. The commit was
therefore reverted.
This change instead adds a 'quiet' capability to receive-pack,
which is a backwards compatible.
In addition, this fixes push --quiet via http: A verbosity of 0
means quiet for remote helpers.
Reported-by: Tobias Ulmer <tobiasu@tmux.org>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --single-branch is given, only one branch, either HEAD or one
specified by --branch, will be fetched. Also only tags that point to
the downloaded history are fetched.
This helps most in shallow clones, where it can reduce the download to
minimum and that is why it is enabled by default when --depth is given.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/show-sig:
log --show-signature: reword the common two-head merge case
log-tree: show mergetag in log --show-signature output
log-tree.c: small refactor in show_signature()
commit --amend -S: strip existing gpgsig headers
verify_signed_buffer: fix stale comment
gpg-interface: allow use of a custom GPG binary
pretty: %G[?GS] placeholders
test "commit -S" and "log --show-signature"
log: --show-signature
commit: teach --gpg-sign option
Conflicts:
builtin/commit-tree.c
builtin/commit.c
builtin/merge.c
notes-cache.c
pretty.c
Normally it doesn't matter if we show the pre-image or th post-image
for the common parts of a diff because they are the same. If
white-space changes are ignored they can differ, though. The
new text after applying the diff is more interesting in that case,
so show that instead of the old contents.
Note: GNU diff shows the pre-image.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Any existing commit signature was made against the contents of the old
commit, including its committer date that is about to change, and will
become invalid by amending it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subsequently we assume that there is only one pack. Currently this is
true only by accident. Pass '-a -d' to repack in order to guarantee that
assumption to hold true.
The prune-packed command is now redundant since repack -d already calls
it.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The FETCH_HEAD refname is supposed to refer to the ref that was fetched
and should be merged. However all fetched refs are written to
.git/FETCH_HEAD in an arbitrary order, and resolve_ref_unsafe simply
takes the first ref as the FETCH_HEAD, which is often the wrong one,
when other branches were also fetched.
The solution is to write the for-merge ref(s) to FETCH_HEAD first.
Then, unless --append is used, the FETCH_HEAD refname behaves as intended.
If the user uses --append, they presumably are doing so in order to
preserve the old FETCH_HEAD.
While we are at it, update an old example in the read-tree documentation
that implied that each entry in FETCH_HEAD only has the object name, which
is not true for quite a while.
[jc: adjusted tests]
Signed-off-by: Joey Hess <joey@kitenet.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old code was not very complete or robust. Redo it.
This new code should be useful for a few possible additions
in the future:
- support for * and %%n wildcards
- allowing ... inside paths
- representing branch specs (not just client specs)
- tracking changes to views
Mark the remaining 12 tests in t9809 as fixed.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perforce client views can map individual files,
mapping one //depot file path to one //client file path.
These mappings contain no meta/masking characters.
This patch add support for these file maps to
the currently supported '...' view mappings.
[pw: one test now suceeds]
Signed-off-by: Gary Gibbons <ggibbons@perforce.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct view sorting to support the Perforce order,
where client views are ordered and later views
override earlier view mappings.
[pw: one test now succeeds]
Signed-off-by: Gary Gibbons <ggibbons@perforce.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change re method in test for unsupported Client View types
(containing %% or *) anywhere in the string rather than
at the begining.
[pw: two tests now succeed]
Signed-off-by: Gary Gibbons <ggibbons@perforce.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test many aspects of processing p4 client views with the
git-p4 option --use-client-spec. 16 out of 22 tests are
currently broken.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* pw/p4-docs-and-tests:
git-p4: document and test submit options
git-p4: test and document --use-client-spec
git-p4: test --keep-path
git-p4: test --max-changes
git-p4: document and test --import-local
git-p4: honor --changesfile option and test
git-p4: document and test clone --branch
git-p4: test cloning with two dirs, clarify doc
git-p4: clone does not use --git-dir
git-p4: introduce asciidoc documentation
rename git-p4 tests
* maint:
docs: describe behavior of relative submodule URLs
fix hang in git fetch if pointed at a 0 length bundle
Documentation: read-tree --prefix works with existing subtrees
Add MYMETA.json to perl/.gitignore
git-repo if interupted at the exact wrong time will generate zero
length bundles- literal empty files. git-repo is wrong here, but
git fetch shouldn't effectively spin loop if pointed at a zero
length bundle.
Signed-off-by: Brian Harring <ferringb@chromium.org>
Helped-by: Johannes Sixt
Helped-by: Nguyen Thai Ngoc Duy
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When performing a plain "git stash" (without --patch), git-diff would fail
with "fatal: ambiguous argument 'HEAD': both revision and filename". The
output was piped into git-update-index, masking the failed exit status.
The output is now sent to a temporary file (which is cleaned up by
existing code), and the exit status is checked. The "HEAD" arg to the
git-diff invocation has been disambiguated too, of course.
In patch mode, "git stash -p" would fail harmlessly, leaving the working
dir untouched. Interactive adding is fine, but the resulting tree was
diffed with an ambiguous 'HEAD' argument.
Use >foo (no space) when redirecting output.
In t3904, checks and operations on each file are in the order they'll
appear when interactively staging.
In t3905, fix a bug in "stash save --include-untracked -q is quiet": The
redirected stdout file was considered untracked, and so was removed from
the working directory. Use test path helper functions where appropriate.
Signed-off-by: Jonathon Mah <me@JonathonMah.com>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/checkout-m-twoway:
t/t2023-checkout-m.sh: fix use of test_must_fail
checkout_merged(): squelch false warning from some gcc
Test 'checkout -m -- path'
checkout -m: no need to insist on having all 3 stages
* jn/maint-sequencer-fixes:
revert: stop creating and removing sequencer-old directory
Revert "reset: Make reset remove the sequencer state"
revert: do not remove state until sequence is finished
revert: allow single-pick in the middle of cherry-pick sequence
revert: pass around rev-list args in already-parsed form
revert: allow cherry-pick --continue to commit before resuming
revert: give --continue handling its own function
* jk/fetch-no-tail-match-refs:
connect.c: drop path_match function
fetch-pack: match refs exactly
t5500: give fully-qualified refs to fetch-pack
drop "match" parameter from get_remote_heads
Clarify there is a -M option, but no -C. These are both
configurable through variables.
Explain that the allowSubmit variable takes a comma-separated
list of branch names.
Catch earlier an invalid branch name given as an argument to
"git p4 clone".
Test option --origin, variable allowSubmit, and explicit master
branch name.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The depot path is required, even with this option. Make sure
git-p4 fails and exits with non-zero.
Contents in the specified depot path will be rearranged according
to the client spec. Test this and add a note in the docs.
Leave an XXX suggesting that this is somewhat confusing behavior
that might be good to fix later.
Function stripRepoPath() looks at self.useClientSpec. Make sure
this is set both for command-line option --use-client-spec and
for configuration variable git-p4.useClientSpec. Test this.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Explain that it is needed on future syncs to find p4 branches
in refs/heads. Test this behavior.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an explicit list of changes is given, it makes no sense to
use @all or @3,5 or any of the other p4 revision specifiers.
Make the code notice when this happens, instead of just ignoring
--changesfile. Test it.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clone with --branch will not checkout HEAD, unless the branch
happens to be called the default refs/remotes/p4/master. The
--branch option is most useful with sync; give an example of
that.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document how git-p4 currently works when specifying multiple
depot paths:
1. No branches or directories are named.
2. Conflicting files are silently ignored---the last change
wins.
2. Option --destination is required, else the last path is construed
to be a directory.
3. Revision specifiers must be the same on all paths for them to
take effect.
Test this behavior.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Complain if --git-dir is given during a clone. It has no
effect. Only --destination and --bare can change where the newly
cloned git dir will be.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use consistent naming for all tests: "t98<num>-git-p4-<topic>.sh"
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/grep-threading:
grep: disable threading in non-worktree case
grep: enable threading with -p and -W using lazy attribute lookup
grep: load funcname patterns for -W
* nd/war-on-nul-in-commit:
commit_tree(): refuse commit messages that contain NULs
Convert commit_tree() to take strbuf as message
merge: abort if fails to commit
Conflicts:
builtin/commit.c
commit.c
commit.h
Change an invocation of test_must_fail() to be inside a
test_expect_success() as is our usual pattern. Having it outside
caused our tests to fail under prove(1) since we wouldn't print a
newline before TAP output:
CONFLICT (content): Merge conflict in both.txt
# GETTEXT POISON #ok 2 - -m restores 2-way conflicted+resolved file
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use 'printf %d $(whatever|wc -l)' so that the shell removes the blanks
for us.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/checkout-m-twoway:
checkout_merged(): squelch false warning from some gcc
Test 'checkout -m -- path'
checkout -m: no need to insist on having all 3 stages
* jk/fetch-no-tail-match-refs:
connect.c: drop path_match function
fetch-pack: match refs exactly
t5500: give fully-qualified refs to fetch-pack
drop "match" parameter from get_remote_heads
* jn/maint-sequencer-fixes:
revert: stop creating and removing sequencer-old directory
Revert "reset: Make reset remove the sequencer state"
revert: do not remove state until sequence is finished
revert: allow single-pick in the middle of cherry-pick sequence
revert: pass around rev-list args in already-parsed form
revert: allow cherry-pick --continue to commit before resuming
revert: give --continue handling its own function
* tr/cache-tree:
reset: update cache-tree data when appropriate
commit: write cache-tree data when writing index anyway
Refactor cache_tree_update idiom from commit
Test the current state of the cache-tree optimization
Add test-scrap-cache-tree
* jk/credentials:
t: add test harness for external credential helpers
credentials: add "store" helper
strbuf: add strbuf_add*_urlencode
Makefile: unix sockets may not available on some platforms
credentials: add "cache" helper
docs: end-user documentation for the credential subsystem
credential: make relevance of http path configurable
credential: add credential.*.username
credential: apply helper config
http: use credential API to get passwords
credential: add function for parsing url components
introduce credentials API
t5550: fix typo
test-lib: add test_config_global variant
Conflicts:
strbuf.c
Not setting them to raw mode causes funny things to happen, such as
\n -> \r\n translation:
./test-terminal.perl echo foo | xxd
0000000: 666f 6f0d 0a foo..
(Notice the added 0d.)
To avoid this, set the (pseudo)terminal to raw mode. Note that the
IO::Pty docs recommend doing it on both master and slave.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The whole point of the recent update to allow "git pull $url $tagname" is
so that the integrator does not have to store the (signed) tag that is
used to convey authenticity to be recorded in the resulting merge in the
local repository's tag namespace. Asking for a merge be made with "git
pull $url tag $tagname" defeats it.
Note that the request can become ambiguous if the requestor has a branch
with the same name as the tag, but that is not a new problem limited to
pulling. I wouldn't mind if somebody wants to add disambiguation to the
find_matching_ref logic in the script as a separate patch, though.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When receive-pack advertises its list of refs, it generally hides the
capabilities information after a NUL at the end of the first ref.
However, when we have an empty repository, there are no refs, and
therefore receive-pack writes a fake ref "capabilities^{}" with the
capabilities afterwards.
On the client side, git reads the result with get_remote_heads(). We pick
the capabilities from the end of the line, and then call check_ref() to
make sure the ref name is valid. We see that it isn't, and don't bother
adding it to our list of refs.
However, the call to check_ref() is enabled by passing the REF_NORMAL flag
to get_remote_heads. For the regular git transport, we pass REF_NORMAL in
get_refs_via_connect() if we are doing a push (since only receive-pack
uses this fake ref). But in remote-curl, we never use this flag, and we
accept the fake ref as a real one, passing it back from the helper to the
parent git-push.
Most of the time this bug goes unnoticed, as the fake ref won't match our
refspecs. However, if "--mirror" is used, then we see it as remote cruft
to be pruned, and try to pass along a deletion refspec for it. Of course
this refspec has bogus syntax (because of the ^{}), and the helper
complains, aborting the push.
Let's have remote-curl mirror what the builtin get_refs_via_connect() does
(at least for the case of using git protocol; we can leave the dumb
info/refs reader as it is).
This also fixes pushing with --mirror to a smart-http remote that uses
alternates. The fake ".have" refs the server gives to avoid unnecessary
network transfer has a similar bad interactions with the machinery.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 7c766e5 (git-p4: introduce skipSubmitEdit, 2011-12-04)
made it easier to automate submission to p4, but broke the most
common case.
Add a test for when the user really does edit and save the change
template, and fix the bug that causes the test to fail.
Also add a confirmation message when submission is cancelled.
Reported-by: Michael Horowitz <michael.horowitz@ieee.org>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/stream-to-pack:
bulk-checkin: replace fast-import based implementation
csum-file: introduce sha1file_checkpoint
finish_tmp_packfile(): a helper function
create_tmp_packfile(): a helper function
write_pack_header(): a helper function
Conflicts:
pack.h
When doing a reflog walk, you can get some information about
the reflog (such as the subject line), but not the identity
information (i.e., name and email).
Let's make those available, mimicing the options for author
and committer identity.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old code that insisted on asking for the tip of a branch to be pulled
were not updated when we started allowing for a tag to be pulled. When a
tag points at an older part of the history and there is no branch that
points at the tagged commit, the script failed to say which ref is to be
pulled.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "cherry-pick persists opts correctly" test in t3510
(cherry-pick-sequence) can cause some confusion, because the command
actually has two points of failure:
1. "-m 1" is specified on the command-line despite the base commit
"initial" not being a merge-commit.
2. The revision range indicates that there will be a conflict that
needs to be resolved.
Although the former error is trapped, and cherry-pick die()s with the
exit status 128, the reader may be distracted by the latter. Fix this
by changing the revision range to something that wouldn't cause a
conflict. Additionally, explicitly check the exit code in
"cherry-pick a non-merge with -m should fail" in t3502
(cherry-pick-merge) to reassure the reader that this failure has
nothing to do with the sequencer itself.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All the tests asserting failure use 'test_must_fail', which simply
checks for a non-zero exit status, potentially hiding underlying bugs.
So, replace instances of 'test_must_fail' with 'test_expect_code' to
check the exit status explicitly, where appropriate.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tolerate extra spaces and tabs as part of the the field separator in
'.git/sequencer/todo', for people with fat fingers.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the instruction sheet format subtly so that the subject of the
commit message that follows the object name is optional. As a result,
an instruction sheet like this is now perfectly valid:
pick 35b0426
pick fbd5bbcbc2e
pick 7362160f
While at it, also fix a bug introduced by 5a5d80f4 (revert: Introduce
--continue to continue the operation, 2011-08-04) that failed to read
lines that are too long to fit on the commit-id-shaped buffer we
currently use; eliminate the need for the buffer altogether. In
addition to literal SHA-1 hexes, you can now safely use expressions
like the following in the instruction sheet:
featurebranch~4
rr/revert-cherry-pick-continue^2~12@{12 days ago}
[jc: simplify parsing]
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current implementation sees NUL as terminator. If users give a message
with NUL byte in it (e.g. editor set to save as UTF-16), the new commit
message will have NULs. However following operations (displaying or
amending a commit for example) will not keep anything after the first NUL.
Stop user right when they do this. If NUL is added by mistake, they have
their chance to fix. Otherwise, log messages will no longer be text "git
log" and friends would grok.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to run tests in a predictable, sterile environment
so we can get repeatable results. They should take as
little input as possible from the environment outside the
test script. We already sanitize environment variables, but
leave stdin untouched. This means that scripts can
accidentally be impacted by content on stdin, or whether
stdin isatty().
Furthermore, scripts reading from stdin can be annoying to
outer loops which care about their stdin offset, like:
while read sha1; do
make test
done
A test which accidentally reads stdin would soak up all of
the rest of the input intended for the outer shell loop.
Let's redirect stdin from /dev/null, which solves both
of these problems. It won't detect tests accidentally
reading from stdin, but since doing so now gives a
deterministic result, we don't need to consider that an
error.
We'll also leave file descriptor 6 as a link to the original
stdin. Tests shouldn't need to look at this, but it can be
convenient for inserting interactive commands while
debugging tests (e.g., you could insert "bash <&6 >&3 2>&4"
to run interactive commands in the environment of the test
script).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This script uses the following idiom to start each test in a known
good state:
test_expect_success 'some commands use a pager' '
rm -f paginated.out || cleanup_fail &&
test_terminal git log &&
test -e paginated.out
'
where "cleanup_fail" is a function that prints an error message and
errors out.
That is bogus on three levels:
- Cleanup commands like "rm -f" and "test_unconfig" are designed not
to fail, so this logic would never trip.
- If they were to malfunction anyway, it is not useful to set apart
cleanup commands as a special kind of failure with a special error
message. Whichever command fails, the next step is to investigate
which command that was, for example by running tests with
"prove -e 'sh -x'", and fix it.
- Relying on left-associativity of mixed &&/|| lists makes the code
somewhat cryptic.
The fix is simple: drop the "|| cleanup_fail" in each test and the
definition of the "cleanup_fail" function so no new callers can arise.
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-side-by-side-diff:
gitweb: Add navigation to select side-by-side diff
gitweb: Use href(-replay=>1,...) for formats links in "commitdiff"
t9500: Add basic sanity tests for side-by-side diff in gitweb
t9500: Add test for handling incomplete lines in diff by gitweb
gitweb: Give side-by-side diff extra CSS styling
gitweb: Add a feature to show side-by-side diff
gitweb: Extract formatting of diff chunk header
gitweb: Refactor diff body line classification
Before commit 986bbc08, git was proactive about asking for
http passwords. It assumed that if you had a username in
your URL, you would also want a password, and asked for it
before making any http requests.
However, this could interfere with the use of .netrc (see
986bbc08 for details). And it was also unnecessary, since
the http fetching code had learned to recognize an HTTP 401
and prompt the user then. Furthermore, the proactive prompt
could interfere with the usage of .netrc (see 986bbc08 for
details).
Unfortunately, the http push-over-DAV code never learned to
recognize HTTP 401, and so was broken by this change. This
patch does a quick fix of re-enabling the "proactive auth"
strategy only for http-push, leaving the dumb http fetch and
smart-http as-is.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't currently test this case at all, and instead just
test the DAV mechanism over an unauthenticated push. That
isn't very realistic, as most people will want to
authenticate pushes.
Two of the tests expect_failure as they reveal bugs:
1. Pushing without a username in the URL fails to ask for
credentials when we get an HTTP 401. This has always
been the case, but it would be nice if it worked like
smart-http.
2. Pushing with a username fails to ask for the password
since 986bbc0 (http: don't always prompt for password,
2011-11-04). This is a severe regression in v1.7.8, as
authenticated push-over-DAV is now totally unusable
unless you have credentials in your .netrc.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are determining the list of refs to fetch via
fetch-pack, we have two sets of refs to compare: those on
the remote side, and a "match" list of things we want to
fetch. We iterate through the remote refs alphabetically,
seeing if each one is wanted by the "match" list.
Since def88e9 (Commit first cut at "git-fetch-pack",
2005-07-04), we have used the "path_match" function to do a
suffix match, where a remote ref is considered wanted if
any of the "match" elements is a suffix of the remote
refname.
This enables callers of fetch-pack to specify unqualified
refs and have them matched up with remote refs (e.g., ask
for "A" and get remote's "refs/heads/A"). However, if you
provide a fully qualified ref, then there are corner cases
where we provide the wrong answer. For example, given a
remote with two refs:
refs/foo/refs/heads/master
refs/heads/master
asking for "refs/heads/master" will first match
"refs/foo/refs/heads/master" by the suffix rule, and we will
erroneously fetch it instead of refs/heads/master.
As it turns out, all callers of fetch_pack do provide
fully-qualified refs for the match list. There are two ways
fetch_pack can get match lists:
1. Through the transport code (i.e., via git-fetch)
2. On the command-line of git-fetch-pack
In the first case, we will always be providing the names of
fully-qualified refs from "struct ref" objects. We will have
pre-matched those ref objects already (since we have to
handle more advanced matching, like wildcard refspecs), and
are just providing a list of the refs whose objects we need.
In the second case, users could in theory be providing
non-qualified refs on the command-line. However, the
fetch-pack documentation claims that refs should be fully
qualified (and has always done so since it was written in
2005).
Let's change this path_match call to simply check for string
equality, matching what the callers of fetch_pack are
expecting.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fetch-pack documentation is very clear that refs given
on the command line are to be full refs:
<refs>...::
The remote heads to update from. This is relative to
$GIT_DIR (e.g. "HEAD", "refs/heads/master"). When
unspecified, update from all heads the remote side has.
and this has been the case since fetch-pack was originally documented in
8b3d9dc ([PATCH] Documentation: clone/fetch/upload., 2005-07-14).
Let's follow our own documentation to set a good example,
and to avoid breaking when this restriction is enforced in
the next patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have tests for the internal helpers, but it's
nice to give authors of external tools an easy way to
sanity-check their helpers.
If you have written the "git-credential-foo" helper, you can
do so with:
GIT_TEST_CREDENTIAL_HELPER=foo \
make t0303-credential-external.sh
This assumes that your helper is capable of both storing and
retrieving credentials (some helpers may be read-only, and
they will fail these tests).
If your helper supports time-based expiration with a
configurable timeout, you can test that feature like this:
GIT_TEST_CREDENTIAL_HELPER_TIMEOUT="foo --timeout=1" \
make t0303-credential-external.sh
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is like "cache", except that we actually put the
credentials on disk. This can be terribly insecure, of
course, but we do what we can to protect them by filesystem
permissions, and we warn the user in the documentation.
This is not unlike using .netrc to store entries, but it's a
little more user-friendly. Instead of putting credentials in
place ahead of time, we transparently store them after
prompting the user for them once.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a configuration option NO_UNIX_SOCKETS to exclude code that
depends on Unix sockets and use it in MSVC and MinGW builds.
Notice that unix-socket.h was missing from LIB_H before; fix that, too.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-grep avoids loading the funcname patterns unless they are needed.
ba8ea74 (grep: add option to show whole function as context,
2011-08-01) forgot to extend this test also to the new funcbody
feature. Do so.
The catch is that we also have to disable threading when using
userdiff, as explained in grep_threads_ok(). So we must be careful to
introduce the same test there.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 95eb88d8ee, which
was a UI experiment that did not reflect how "git reset" actually gets
used. The reversion also fixes a test, indicated in the patch.
Encouraged-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As v1.7.8-rc0~141^2~4 (2011-08-04) explains, git cherry-pick removes
the sequencer state just before applying the final patch. In the
single-pick case, that was a good thing, since --abort and --continue
work fine without access to such state and removing it provides a
signal that git should not complain about the need to clobber it ("a
cherry-pick or revert is already in progress") in sequences like the
following:
git cherry-pick foo
git read-tree -m -u HEAD; # forget that; let's try a different one
git cherry-pick bar
After the recent patch "allow single-pick in the middle of cherry-pick
sequence" we don't need that hack any more. In the new regime, a
traditional "git cherry-pick <commit>" command never looks at
.git/sequencer, so we do not need to cripple "git cherry-pick
<commit>..<commit>" for it any more.
So now you can run "git cherry-pick --abort" near the end of a
multi-pick sequence and it will abort the entire sequence, instead of
misbehaving and aborting just the final commit.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After messing up a difficult conflict resolution in the middle of a
cherry-pick sequence, it can be useful to be able to
git checkout HEAD . && git cherry-pick that-one-commit
to restart the conflict resolution. The current code however errors out
saying that another cherry-pick is already in progress.
Suggested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 7e2bfd3f (revert: allow cherry-picking more than one commit,
2010-07-02), the pick/revert machinery has kept track of the set of
commits to be cherry-picked or reverted using commit_argc and
commit_argv variables, storing the corresponding command-line
parameters.
Future callers as other commands are built in (am, rebase, sequencer)
may find it easier to pass rev-list options to this machinery in
already-parsed form. Teach cmd_cherry_pick and cmd_revert to parse
the rev-list arguments in advance and pass the commit set to
pick_revisions() as a rev_info structure.
Original patch by Jonathan, tweaks and test from Ram.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git cherry-pick ..bar" encounters conflicts, permit the operator
to use cherry-pick --continue after resolving them as a shortcut for
"git commit && git cherry-pick --continue" to record the resolution
and carry on with the rest of the sequence.
This improves the analogy with "git rebase" (in olden days --continue
was the way to preserve authorship when a rebase encountered
conflicts) and fits well with a general UI goal of making "git cmd
--continue" save humans the trouble of deciding what to do next.
Example: after encountering a conflict from running "git cherry-pick
foo bar baz":
CONFLICT (content): Merge conflict in main.c
error: could not apply f78a8d98c... bar!
hint: after resolving the conflicts, mark the corrected paths
hint: with 'git add <paths>' or 'git rm <paths>'
hint: and commit the result with 'git commit'
We edit main.c to resolve the conflict, mark it acceptable with "git
add main.c", and can run "cherry-pick --continue" to resume the
sequence.
$ git cherry-pick --continue
[editor opens to confirm commit message]
[master 78c8a8c98] bar!
1 files changed, 1 insertions(+), 1 deletions(-)
[master 87ca8798c] baz!
1 files changed, 1 insertions(+), 1 deletions(-)
This is done for both codepaths to pick multiple commits and a single
commit.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you access repositories over smart-http using http
authentication, then it can be annoying to have git ask you
for your password repeatedly. We cache credentials in
memory, of course, but git is composed of many small
programs. Having to input your password for each one can be
frustrating.
This patch introduces a credential helper that will cache
passwords in memory for a short period of time.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing a URL into a credential struct, we carefully
record each part of the URL, including the path on the
remote host, and use the result as part of the credential
context.
This had two practical implications:
1. Credential helpers which store a credential for later
access are likely to use the "path" portion as part of
the storage key. That means that a request to
https://example.com/foo.git
would not use the same credential that was stored in an
earlier request for:
https://example.com/bar.git
2. The prompt shown to the user includes all relevant
context, including the path.
In most cases, however, users will have a single password
per host. The behavior in (1) will be inconvenient, and the
prompt in (2) will be overly long.
This patch introduces a config option to toggle the
relevance of http paths. When turned on, we use the path as
before. When turned off, we drop the path component from the
context: helpers don't see it, and it does not appear in the
prompt.
This is nothing you couldn't do with a clever credential
helper at the start of your stack, like:
[credential "http://"]
helper = "!f() { grep -v ^path= ; }; f"
helper = your_real_helper
But doing this:
[credential]
useHttpPath = false
is way easier and more readable. Furthermore, since most
users will want the "off" behavior, that is the new default.
Users who want it "on" can set the variable (either for all
credentials, or just for a subset using
credential.*.useHttpPath).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Credential helpers can help users avoid having to type their
username and password over and over. However, some users may
not want a helper for their password, or they may be running
a helper which caches for a short time. In this case, it is
convenient to provide the non-secret username portion of
their credential via config.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The functionality for credential storage helpers is already
there; we just need to give the users a way to turn it on.
This patch provides a "credential.helper" configuration
variable which allows the user to provide one or more helper
strings.
Rather than simply matching credential.helper, we will also
compare URLs in subsection headings to the current context.
This means you can apply configuration to a subset of
credentials. For example:
[credential "https://example.com"]
helper = foo
would match a request for "https://example.com/foo.git", but
not one for "https://kernel.org/foo.git".
This is overkill for the "helper" variable, since users are
unlikely to want different helpers for different sites (and
since helpers run arbitrary code, they could do the matching
themselves anyway).
However, future patches will add new config variables where
this extra feature will be more useful.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch converts the http code to use the new credential
API, both for http authentication as well as for getting
certificate passwords.
Most of the code change is simply variable naming (the
passwords are now contained inside the credential struct)
or deletion of obsolete code (the credential code handles
URL parsing and prompting for us).
The behavior should be the same, with one exception: the
credential code will prompt with a description based on the
credential components. Therefore, the old prompt of:
Username for 'example.com':
Password for 'example.com':
now looks like:
Username for 'https://example.com/repo.git':
Password for 'https://user@example.com/repo.git':
Note that we include more information in each line,
specifically:
1. We now include the protocol. While more noisy, this is
an important part of knowing what you are accessing
(especially if you care about http vs https).
2. We include the username in the password prompt. This is
not a big deal when you have just been prompted for it,
but the username may also come from the remote's URL
(and after future patches, from configuration or
credential helpers). In that case, it's a nice
reminder of the user for which you're giving the
password.
3. We include the path component of the URL. In many
cases, the user won't care about this and it's simply
noise (i.e., they'll use the same credential for a
whole site). However, that is part of a larger
question, which is whether path components should be
part of credential context, both for prompting and for
lookup by storage helpers. That issue will be addressed
as a whole in a future patch.
Similarly, for unlocking certificates, we used to say:
Certificate Password for 'example.com':
and we now say:
Password for 'cert:///path/to/certificate':
Showing the path to the client certificate makes more sense,
as that is what you are unlocking, not "example.com".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few places in git that need to get a username
and password credential from the user; the most notable one
is HTTP authentication for smart-http pushing.
Right now the only choices for providing credentials are to
put them plaintext into your ~/.netrc, or to have git prompt
you (either on the terminal or via an askpass program). The
former is not very secure, and the latter is not very
convenient.
Unfortunately, there is no "always best" solution for
password management. The details will depend on the tradeoff
you want between security and convenience, as well as how
git can integrate with other security systems (e.g., many
operating systems provide a keychain or password wallet for
single sign-on).
This patch provides an abstract notion of credentials as a
data item, and provides three basic operations:
- fill (i.e., acquire from external storage or from the
user)
- approve (mark a credential as "working" for further
storage)
- reject (mark a credential as "not working", so it can
be removed from storage)
These operations can be backed by external helper processes
that interact with system- or user-specific secure storage.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This didn't have an impact, because it was just setting up
an "expect" file that happened to be identical to the one in
the test before it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of test_config is to simultaneously set a config
variable and register its cleanup handler, like:
test_config core.foo bar
However, it stupidly assumes that $1 contained the name of
the variable, which means it won't work for:
test_config --global core.foo bar
We could try to parse the command-line ourselves and figure
out which parts need to be fed to test_unconfig. But since
this is likely the most common variant, it's much simpler
and less error-prone to simply add a new function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify t3401 by using test_commit in the setup. This lets us refer
to commits using their tags and there is no longer a need to create
the branch my-topic-branch-merge. Also, the branch master-merge points
to the same commit as master (even before this change), so that branch
does not need to be created either.
While at it, replace "test ! -d" by "test_path_is_missing".
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Put the opening quote starting each test on the same line as the
test_expect_* invocation. Also make sure to use tabs for indentation.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/pull-signed-tag:
commit-tree: teach -m/-F options to read logs from elsewhere
commit-tree: update the command line parsing
commit: teach --amend to carry forward extra headers
merge: force edit and no-ff mode when merging a tag object
commit: copy merged signed tags to headers of merge commit
merge: record tag objects without peeling in MERGE_HEAD
merge: make usage of commit->util more extensible
fmt-merge-msg: Add contents of merged tag in the merge message
fmt-merge-msg: package options into a structure
fmt-merge-msg: avoid early returns
refs DWIMmery: use the same rule for both "git fetch" and others
fetch: allow "git fetch $there v1.0" to fetch a tag
merge: notice local merging of tags and keep it unwrapped
fetch: do not store peeled tag object names in FETCH_HEAD
Split GPG interface into its own helper library
Conflicts:
builtin/fmt-merge-msg.c
builtin/merge.c
* jc/request-pull-show-head-4:
request-pull: use the annotated tag contents
fmt-merge-msg.c: Fix an "dubious one-bit signed bitfield" sparse error
environment.c: Fix an sparse "symbol not declared" warning
builtin/log.c: Fix an "Using plain integer as NULL pointer" warning
fmt-merge-msg: use branch.$name.description
request-pull: use the branch description
request-pull: state what commit to expect
request-pull: modernize style
branch: teach --edit-description option
format-patch: use branch description in cover letter
branch: add read_branch_desc() helper function
Conflicts:
builtin/branch.c
Breaks in a test assertion's && chain can potentially hide failures
from earlier commands in the chain. Fix instances of this. While at
it, clean up the style to fit the prevailing style. This means:
- Put the opening quote starting each test on the same line as the
test_expect_* invocation.
- Indent the file with tabs, not spaces.
- Use test_expect_code() in preference to checking the exit status of
various statements by hand.
- Guard commands that prepare test input for individual tests in the
same test_expect_success, so that their scope is clearer and errors
at that stage can be caught.
- Use <<-\EOF in preference to <<EOF to save readers the trouble of
looking for variable interpolations.
- Include "setup" in the titles of test assertions that prepare for
later ones to make it more obvious which tests can be skipped.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Breaks in a test assertion's && chain can potentially hide failures
from earlier commands in the chain.
'unset' returns non-zero status when the variable passed was already unset
on some shells; we need to change these instances to 'sane_unset'.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test_expect_code in preference to repeatedly checking exit codes
by hand.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Breaks in a test assertion's && chain can potentially hide failures from
earlier commands in the chain by adding " &&" at the end of line to the
commands that need them.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Breaks in a test assertion's && chain can potentially hide failures
from earlier commands in the chain. Fix these breaks.
The 'git branch --help' in the test may fail if git manual pages are
not installed, but the point of the test is to make sure it does not
create a bogus branch "--help", so run it under 'test_might_fail'.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A quick test to make sure git doesn't lose the functionality added by
the recent patch "commit: honor --no-edit", plus another test to check
the classical --edit use case (use with "-m").
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Put the opening quote starting each test on the same line as the
test_expect_* invocation. While at it:
- guard commands that prepare test input for individual tests in
the same test_expect_success, so their scope is clearer and
errors at that stage can be caught;
- use the compare_diff_patch helper function when comparing patches;
- use single-quotes in preference to double-quotes and <<\EOF in
preference to <<EOF, to save readers the trouble of looking for
variable interpolations;
- lift the setting of the $author variable used throughout the
test script to the top of the test script;
- include "setup" in the titles of test assertions that prepare for
later ones to make it more obvious which tests can be skipped;
- use test_must_fail instead of "if ...; then:; else false; fi",
for clarity and to catch segfaults when they happen;
- break up some pipelines into separate commands that read and write
to ordinary files, and test the exit status at each stage;
- chain commands with &&. Breaks in a test assertion's && chain can
potentially hide failures from earlier commands in the chain;
- combine two initial tests that do not make as much sense alone.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rev-list output in this test depends on the details of test_tick's
dummy dates and the choice of hash function. Worse, it depends on the
order and nature of commits made in the earlier tests, so adding new
tests or rearranging existing ones breaks it.
It would be nice to check that "git commit" and commit-tree name
objects consistently and that commit objects' text is as documented,
but this particular test checks everything at once and hence is not a
robust test for that. Remove it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test wants to modify a file and commit the change, but because of
a missing separator between commands it is parsed as a single "echo"
command.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of --mixed and --hard, we throw away the old index and
rebuild everything from the tree argument (or HEAD). So we have an
opportunity here to fill in the cache-tree data, just as read-tree
did.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In prepare_index(), we refresh the index, and then write it to disk if
this changed the index data. After running hooks we re-read the index
and compute the root tree sha1 with the cache-tree machinery.
This gives us a mostly free opportunity to write up-to-date cache-tree
data: we can compute it in prepare_index() immediately before writing
the index to disk.
If we do this, we were going to write the index anyway, and the later
cache-tree update has no further work to do. If we don't do it, we
don't do any extra work, though we still don't have have cache-tree
data after the commit.
The only case that suffers badly is when the pre-commit hook changes
many trees in the index. I'm writing this off as highly unusual.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The cache-tree optimization originally helped speed up write-tree
operation. However, many commands no longer properly maintain -- or
use an opportunity to cheaply generate -- the cache-tree data. In
particular, this affects commit, checkout and reset. The notable
examples that *do* write cache-tree data are read-tree and write-tree.
This sadly means most people no longer benefit from the optimization,
as they would not normally use the plumbing commands.
Document the current state of affairs in a test file, in preparation
for improvements in the area.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the skeleton implementation of i18n in Git to one that can show
localized strings to users for our C, Shell and Perl programs using
either GNU libintl or the Solaris gettext implementation.
This new internationalization support is enabled by default. If
gettext isn't available, or if Git is compiled with
NO_GETTEXT=YesPlease, Git falls back on its current behavior of
showing interface messages in English. When using the autoconf script
we'll auto-detect if the gettext libraries are installed and act
appropriately.
This change is somewhat large because as well as adding a C, Shell and
Perl i18n interface we're adding a lot of tests for them, and for
those tests to work we need a skeleton PO file to actually test
translations. A minimal Icelandic translation is included for this
purpose. Icelandic includes multi-byte characters which makes it easy
to test various edge cases, and it's a language I happen to
understand.
The rest of the commit message goes into detail about various
sub-parts of this commit.
= Installation
Gettext .mo files will be installed and looked for in the standard
$(prefix)/share/locale path. GIT_TEXTDOMAINDIR can also be set to
override that, but that's only intended to be used to test Git itself.
= Perl
Perl code that's to be localized should use the new Git::I18n
module. It imports a __ function into the caller's package by default.
Instead of using the high level Locale::TextDomain interface I've
opted to use the low-level (equivalent to the C interface)
Locale::Messages module, which Locale::TextDomain itself uses.
Locale::TextDomain does a lot of redundant work we don't need, and
some of it would potentially introduce bugs. It tries to set the
$TEXTDOMAIN based on package of the caller, and has its own
hardcoded paths where it'll search for messages.
I found it easier just to completely avoid it rather than try to
circumvent its behavior. In any case, this is an issue wholly
internal Git::I18N. Its guts can be changed later if that's deemed
necessary.
See <AANLkTilYD_NyIZMyj9dHtVk-ylVBfvyxpCC7982LWnVd@mail.gmail.com> for
a further elaboration on this topic.
= Shell
Shell code that's to be localized should use the git-sh-i18n
library. It's basically just a wrapper for the system's gettext.sh.
If gettext.sh isn't available we'll fall back on gettext(1) if it's
available. The latter is available without the former on Solaris,
which has its own non-GNU gettext implementation. We also need to
emulate eval_gettext() there.
If neither are present we'll use a dumb printf(1) fall-through
wrapper.
= About libcharset.h and langinfo.h
We use libcharset to query the character set of the current locale if
it's available. I.e. we'll use it instead of nl_langinfo if
HAVE_LIBCHARSET_H is set.
The GNU gettext manual recommends using langinfo.h's
nl_langinfo(CODESET) to acquire the current character set, but on
systems that have libcharset.h's locale_charset() using the latter is
either saner, or the only option on those systems.
GNU and Solaris have a nl_langinfo(CODESET), FreeBSD can use either,
but MinGW and some others need to use libcharset.h's locale_charset()
instead.
=Credits
This patch is based on work by Jeff Epler <jepler@unpythonic.net> who
did the initial Makefile / C work, and a lot of comments from the Git
mailing list, including Jonathan Nieder, Jakub Narebski, Johannes
Sixt, Erik Faye-Lund, Peter Krefting, Junio C Hamano, Thomas Rast and
others.
[jc: squashed a small Makefile fix from Ramsay]
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a configuration variable to skip invoking the editor in the
submit path.
The existing variable skipSubmitEditCheck continues to make sure
that the submit template was indeed modified by the editor; but,
it is not considered if skipSubmitEdit is true.
Reported-by: Loren A. Linden Levy <lindenle@gmail.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git apply is passed something that is not a patch, it does not produce
an error message or exit with a non-zero status if it was not actually
"applying" the patch i.e. --check or --numstat etc were supplied on the
command line.
Fix this by producing an error when apply fails to find any hunks whatsoever
while parsing the patch.
This will cause some of the output formats (--numstat, --diffstat, etc) to
produce an error when they formerly would have reported zero changes and
exited successfully. That seems like the correct behavior though. Failure
to recognize the input as a patch should be an error.
Plus, add a test.
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
