When running, e.g., `git -c alias.bar=foo bar`, we expand the alias and
execute `git-foo` as a dashed external. This is true even if git foo is
a builtin. That is on purpose, and is motivated in a comment which was
added in commit 441981bc ("git: simplify environment save/restore
logic", 2016-01-26).
Shortly before we launch a dashed external, and unless we have already
found out whether we should use a pager, we check `pager.foo`. This was
added in commit 92058e4d ("support pager.* for external commands",
2011-08-18). If the dashed external is a builtin, this does not match
that commit's intention and is arguably wrong, since it would be cleaner
if we let the "dashed external builtin" handle `pager.foo`.
This has not mattered in practice, but a recent patch taught `git-tag`
to ignore `pager.tag` under certain circumstances. But, when started
using an alias, it doesn't get the chance to do so, as outlined above.
That recent patch added a test to document this breakage.
Do not check `pager.foo` before launching a builtin as a dashed
external, i.e., if we recognize the name of the external as a builtin.
Change the test to use `test_expect_success`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous patch taught `git tag` to only respect `pager.tag` in
list-mode. That patch left the default value of `pager.tag` at "off".
After that patch, it makes sense to let the default value be "on"
instead, since it will help with listing many tags, but will not hurt
users of `git tag -a` as it would have before. Make that change. Update
documentation and tests.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using, e.g., `git -c pager.tag tag -a new-tag` results in errors such as
"Vim: Warning: Output is not to a terminal" and a garbled terminal.
Someone who makes use of both `git tag -a` and `git tag -l` will
probably not set `pager.tag`, so that `git tag -a` will actually work,
at the cost of not paging output of `git tag -l`.
Use the mechanisms introduced in two earlier patches to ignore
`pager.tag` in git.c and let the `git tag` builtin handle it on its own.
Only respect `pager.tag` when running in list-mode.
There is a window between where the pager is started before and after
this patch. This means that early errors can behave slightly different
before and after this patch. Since operation-parsing has to happen
inside this window, this can be seen with `git -c pager.tag="echo pager
is used" tag -l --unknown-option`. This change in paging-behavior should
be acceptable since it only affects erroneous usages.
Update the documentation and update tests.
If an alias is used to run `git tag -a`, then `pager.tag` will still be
respected. Document this known breakage. It will be fixed in a later
commit. Add a similar test for `-l`, which works.
Noticed-by: Anatoly Borodin <anatoly.borodin@gmail.com>
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using, e.g., `git -c pager.tag tag -a new-tag` results in errors such as
"Vim: Warning: Output is not to a terminal" and a garbled terminal.
Someone who makes use of both `git tag -a` and `git tag -l` will
probably not set `pager.tag`, so that `git tag -a` will actually work,
at the cost of not paging output of `git tag -l`.
Since we're about to change how `git tag` respects `pager.tag`, add tests
around this, including how the configuration is ignored if --no-pager or
--paginate are used.
Construct tests with a few different subcommands. First, use -l. Second,
use "no arguments" and --contains, since those imply -l. (There are
more arguments which imply -l, but using these two should be enough.)
Third, use -a as a representative for "not -l". Actually, the tests use
`git tag -am` so no editor is launched, but that is irrelevant, since we
just want to see whether the pager is used or not. Make one of the tests
demonstrate the broken behavior mentioned above, where `git tag -a`
respects `pager.tag`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If revs->def is set (as it is in "git log") and there are no
pending objects after parsing the user's input, then we show
whatever is in "def". But if the user _did_ ask for some
input that just happened to be empty (e.g., "--glob" that
does not match anything), showing the default revision is
confusing. We should just show nothing, as that is what the
user's request yielded.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user gives us no starting point for a traversal, we
want to complain with our normal usage message. But if they
tried to do so with "--all" or "--glob", but that happened
not to match any refs, the usage message isn't helpful. We
should just give them the empty output they asked for
instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 751a2ac6e (rev-list --exclude: tests, 2013-11-01), we
added a few tests for handling "empty" inputs with rev-list
(i.e., where the user gave us some pattern but it turned out
not to queue any objects for traversal), all of which were
marked as failing.
In preparation for working on this area of the code, let's
give each test a more descriptive name. Let's also include
one more case which we should cover: feeding a --glob
pattern that doesn't match anything.
We can also drop the explanatory comment; we'll be
converting these to expect_success in the next few patches,
so the discussion isn't necessary.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cherry-pick and revert should not accept --[no-]rerere-autoupdate once
they have started.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When continuing after conflicts, cherry-pick forgot if the user had specified
'--rerere-autoupdate'.
Redo the cherry-pick rerere tests to check --rerere-autoupdate works
as expected.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using test_commit is simpler than chaining echo && git add &&
test_tick && commit. Also having tags makes it clearer which commit
is being selecting by reset.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Interactive rebase was ignoring '--rerere-autoupdate'. Fix this by
reading it appropriate file when restoring the sequencer state for an
interactive rebase and passing '--rerere-autoupdate' to merge and
cherry-pick when rebasing with '--preserve-merges'.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rebase accepts '--rerere-autoupdate' as an option but only honors it
if '-m' is also given. Fix it for a non-interactive rebase by passing
on the option to 'git am' and 'git cherry-pick'. Rework the tests so
that they can be used for each rebase flavor and extend them.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check for configuration parsing errors in '.gitmodules' in t7411, which
is explicitly testing the submodule-config subsystem, instead of in
t7400. Also explicitly use the test helper instead of relying on the
gitmodules file from being read in status.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/object-id:
sha1_name: convert uses of 40 to GIT_SHA1_HEXSZ
sha1_name: convert GET_SHA1* flags to GET_OID*
sha1_name: convert get_sha1* to get_oid*
Convert remaining callers of get_sha1 to get_oid.
builtin/unpack-file: convert to struct object_id
bisect: convert bisect_checkout to struct object_id
builtin/update_ref: convert to struct object_id
sequencer: convert to struct object_id
remote: convert struct push_cas to struct object_id
submodule: convert submodule config lookup to use object_id
builtin/merge-tree: convert remaining caller of get_sha1 to object_id
builtin/fsck: convert remaining caller of get_sha1 to object_id
tag: convert gpg_verify_tag to use struct object_id
commit: convert lookup_commit_graft to struct object_id
Code refactoring.
* pw/unquote-path-in-git-pm:
t9700: add tests for Git::unquote_path()
Git::unquote_path(): throw an exception on bad path
Git::unquote_path(): handle '\a'
add -i: move unquote_path() to Git.pm
We run an early part of "git gc" that deals with refs before
daemonising (and not under lock) even when running a background
auto-gc, which caused multiple gc processes attempting to run the
early part at the same time. This is now prevented by running the
early part also under the GC lock.
* jk/gc-pre-detach-under-hook:
gc: run pre-detach operations under lock
On Cygwin, similar to Windows, "git push //server/share/repository"
ought to mean a repository on a network share that can be accessed
locally, but this did not work correctly due to stripping the double
slashes at the beginning.
This may need to be heavily tested before it gets unleashed to the
wild, as the change is at a fairly low-level code and would affect
not just the code to decide if the push destination is local. There
may be unexpected fallouts in the path normalization.
* tb/push-to-cygwin-unc-path:
cygwin: allow pushing to UNC paths
If we get a repo path like "-repo.git", we may try to invoke
"git-upload-pack -repo.git". This is going to fail, since
upload-pack will interpret it as a set of bogus options. But
let's reject this before we even run the sub-program, since
we would not want to allow any mischief with repo names that
actually are real command-line options.
You can still ask for such a path via git-daemon, but there's no
security problem there, because git-daemon enters the repo itself
and then passes "." on the command line.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have a GIT_PROXY_COMMAND configured, we will run it
with the host/port on the command-line. If a URL contains a
mischievous host like "--foo", we don't know how the proxy
command may handle it. It's likely to break, but it may also
do something dangerous and unwanted (technically it could
even do something useful, but that seems unlikely).
We should err on the side of caution and reject this before
we even run the command.
The hostname check matches the one we do in a similar
circumstance for ssh. The port check is not present for ssh,
but there it's not necessary because the syntax is "-p
<port>", and there's no ambiguity on the parsing side.
It's not clear whether you can actually get a negative port
to the proxy here or not. Doing:
git fetch git://remote:-1234/repo.git
keeps the "-1234" as part of the hostname, with the default
port of 9418. But it's a good idea to keep this check close
to the point of running the command to make it clear that
there's no way to circumvent it (and at worst it serves as a
belt-and-suspenders check).
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Per the explanation in the previous patch, this should be
(and is) rejected.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests for protocol.allow actually set that variable in
the on-disk config, run a series of tests, and then never
clean up after themselves. This means that whatever tests we
run after have protocol.allow=never, which may influence
their results.
In most cases we either exit after running these tests, or
do another round of test_proto(). In the latter case, this happens to
work because:
1. Tests of the GIT_ALLOW_PROTOCOL environment variable
override the config.
2. Tests of the specific config "protocol.foo.allow"
override the protocol.allow config.
3. The next round of protocol.allow tests start off by
setting the config to a known value.
However, it's a land-mine waiting to trap somebody adding
new tests to one of the t581x test scripts. Let's make sure
we clean up after ourselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t1450-fsck.sh does not have a test that checks fsck's behavior when a
packfile is invalid. It does have a test for when an object in a
packfile is invalid, but in that test, the packfile itself is valid.
Add such a test.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the tricks that `contrib/workdir/git-new-workdir` plays is to
making `packed-refs` in the new workdir a symlink to the `packed-refs`
file in the original repository. Before
42dfa7ecef ("commit_packed_refs(): use a staging file separate from
the lockfile", 2017-06-23), a lockfile was used as the staging file,
and because the `LOCK_NO_DEREF` was not used, the pointed-to file was
locked and modified.
But after that commit, the staging file was created using a tempfile,
with the end result that rewriting the `packed-refs` file in the
workdir overwrote the symlink rather than the original `packed-refs`
file.
Change `commit_packed_refs()` to use `get_locked_file_path()` to find
the path of the file that it should overwrite. Since that path was
properly resolved when the lockfile was created, this restores the
pre-42dfa7ecef behavior.
Also add a test case to document this use case and prevent a
regression like this from recurring.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove hard coded sha1 values, obtain the values using
'git rev-parse HEAD' which should be future proof regardless
of the hash function used.
Additionally future-proof the test by hard coding the
abbreviation length of the hash.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor, into a common function, the version and capability negotiation
done when invoking a long-running process as a clean or smudge filter.
This will be useful for other Git code that needs to interact similarly
with a long-running process.
As you can see in the change to t0021, this commit changes the error
message reported when the long-running process does not introduce itself
with the expected "server"-terminated line. Originally, the error
message reports that the filter "does not support filter protocol
version 2", differentiating between the old single-file filter protocol
and the new multi-file filter protocol - I have updated it to something
more generic and useful.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ls/filter-process-delayed:
convert: add "status=delayed" to filter process protocol
convert: refactor capabilities negotiation
convert: move multiple file filter error handling to separate function
convert: put the flags field before the flag itself for consistent style
t0021: write "OUT <size>" only on success
t0021: make debug log file name configurable
t0021: keep filter log files on comparison
Some projects require every commit, even merges, to be signed off
[*1*]. Because "git merge" does not have a "--signoff" option like
"git commit" does, the user needs to add one manually when the
command presents an editor to describe the merge, or later use "git
commit --amend --signoff".
Help developers of these projects by teaching "--signoff" option to
"git merge".
*1* https://public-inbox.org/git/CAHv71zK5SqbwrBFX=a8-DY9H3KT4FEyMgv__p2gZzNr0WUAPUw@mail.gmail.com/T/#u
Requested-by: Dan Kohn <dan@linuxfoundation.org>
Signed-off-by: Łukasz Gryglicki <lukaszgryglicki@o2.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent update broke an alias that contained an uppercase letter.
* js/alias-case-sensitivity:
alias: compare alias name *case-insensitively*
t1300: demonstrate that CamelCased aliases regressed
Use "p4 -G" to make "p4 changes" output more Python-friendly
to parse.
* mt/p4-parse-G-output:
git-p4: filter for {'code':'info'} in p4CmdList
git-p4: parse marshal output "p4 -G" in p4 changes
git-p4: git-p4 tests with p4 triggers
A recent update broke an alias that contained an uppercase letter.
* js/alias-case-sensitivity:
alias: compare alias name *case-insensitively*
t1300: demonstrate that CamelCased aliases regressed
When running gpg-relevant tests, a gpg-daemon is spawned for each
GNUPGHOME used. This daemon may stay running after the test and cache
file descriptors for the trash directories, even after the trash
directory is removed. This leads to ENOENT errors when attempting to
create files if tests are run multiple times.
Add a cleanup script to force flushing the gpg-agent for that GNUPGHOME
(if any) before setting up the GPG relevant-environment.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Santiago Torres <santiago@nyu.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 06bf4ad1d (push: propagate remote and refspec with
--recurse-submodules) push was taught how to propagate a refspec down to
submodules when the '--recurse-submodules' flag is given. The only refspecs
that are allowed to be propagated are ones which name a ref which exists
in both the superproject and the submodule, with the caveat that 'HEAD'
was disallowed.
This patch teaches push-check (the submodule helper which determines if
a refspec can be propagated to a submodule) to permit propagating 'HEAD'
if and only if the superproject and the submodule both have the same
named branch checked out and the submodule is not in a detached head
state.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We run an early part of "git gc" that deals with refs before
daemonising (and not under lock) even when running a background
auto-gc, which caused multiple gc processes attempting to run the
early part at the same time. This is now prevented by running the
early part also under the GC lock.
* jk/gc-pre-detach-under-hook:
gc: run pre-detach operations under lock
On Cygwin, similar to Windows, "git push //server/share/repository"
ought to mean a repository on a network share that can be accessed
locally, but this did not work correctly due to stripping the double
slashes at the beginning.
This may need to be heavily tested before it gets unleashed to the
wild, as the change is at a fairly low-level code and would affect
not just the code to decide if the push destination is local. There
may be unexpected fallouts in the path normalization.
* tb/push-to-cygwin-unc-path:
cygwin: allow pushing to UNC paths
This is another test balloon to see if we get complaints from people
whose compilers do not support designated initializer for arrays.
The use of the feature is not all that interesting for cases like
the one this patch touches, where the initialized elements of the
array is dense, but it would be nice if we can use the feature to
initialize an array that has elements initialized to interesting
values only sparsely.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git UI can be improved by addressing the error messages to those
they help: inexperienced and casual git users. To this intent, it is
helpful to make sure the terms used in those messages can be understood
by this segment of users, and that they guide them to resolve the
problem.
In particular, failure to apply a patch during a git rebase is a common
problem that can be very destabilizing for the inexperienced user. It is
important to lead them toward the resolution of the conflict (which is a
3-steps process, thus complex) and reassure them that they can escape a
situation they can't handle with "--abort". This commit answer those two
points by detailling the resolution process and by avoiding cryptic git
linguo.
Signed-off-by: William Duclot <william.duclot@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test_copy_bytes() function claims to read up to N bytes,
or until it gets EOF. But we never handle EOF in our loop,
and a short input will cause perl to go into an infinite
loop of read() getting zero bytes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is totally legitimate to add CamelCased aliases, but due to the way
config keys are compared, the case does not matter.
Therefore, we must compare the alias name insensitively to the config
keys.
This fixes a regression introduced by a9bcf6586d1 (alias: use
the early config machinery to expand aliases, 2017-06-14).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is totally legitimate to add CamelCased aliases, but due to the way
config keys are compared, the case does not matter.
Except that now it does: the alias name is expected to be all
lower-case. This is a regression introduced by a9bcf6586d1 (alias: use
the early config machinery to expand aliases, 2017-06-14).
Noticed by Alejandro Pauly, diagnosed by Kevin Willford.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The build procedure has been improved to allow building and testing
Git with address sanitizer more easily.
* jk/build-with-asan:
Makefile: disable unaligned loads with UBSan
Makefile: turn off -fomit-frame-pointer with sanitizers
Makefile: add helper for compiling with -fsanitize
test-lib: turn on ASan abort_on_error by default
test-lib: set ASAN_OPTIONS variable before we run git
"git pull --rebase --recurse-submodules" learns to rebase the
branch in the submodules to an updated base.
* sb/pull-rebase-submodule:
builtin/fetch cleanup: always set default value for submodule recursing
pull: optionally rebase submodules (remote submodule changes only)
builtin/fetch: parse recurse-submodules-default at default options parsing
builtin/fetch: factor submodule recurse parsing out to submodule config
