Clarify that git-grep(1) searches only tracked files, and that each
<pathspec> is a pathspec, as in any other ordinary git commands.
Add an example to show a simple use case for searching all .c and .h
files in the current directory and below.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
It is useful to grep directories non-recursively, e.g. when one wants to
look for all files in the toplevel directory, but not in any subdirectory,
or in Documentation/, but not in Documentation/technical/.
This patch adds support for --max-depth <depth> option to git-grep. If it is
given, git-grep descends at most <depth> levels of directories below paths
specified on the command line.
Note that if path specified on command line contains wildcards, this option
makes no sense, e.g.
$ git grep -l --max-depth 0 GNU -- 'contrib/*'
(note the quotes) will search all files in contrib/, even in
subdirectories, because '*' matches all files.
Documentation updates, bash-completion and simple test cases are also
provided.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Respect the userdiff attributes and config settings when looking for
lines with function definitions in git grep -p.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new option -p instructs git grep to print the previous function
definition as a context line, similar to diff -p. Such context lines
are marked with an equal sign instead of a dash. This option
complements the existing context options -A, -B, -C.
Function definitions are detected using the same heuristic that diff
uses. User defined regular expressions are not supported, yet.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Coloring matches makes them easier to spot in the output.
Add two options and two parameters: color.grep (to turn coloring on
or off), color.grep.match (to set the color of matches), --color
and --no-color (to turn coloring on or off, respectively).
The output of external greps is not changed.
This patch is based on earlier ones by Nguyễn Thái Ngọc Duy and
Thiago Alves.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Here's a trivial patch that adds "-z" and "--null" options to "git
grep". It was discussed on the mailing-list that git's "-z"
convention should be used instead of GNU grep's "-Z".
So things like 'git grep -l -z "$FOO" | xargs -0 sed -i "s/$FOO/$BOO/"'
do work now.
Signed-off-by: Raphael Zimmerer <killekulla@rdrz.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The OPTIONS section of a documentation file contains a list
of the options a git command accepts.
Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.
Some are:
-f, --foo::
-f|--foo::
-f | --foo::
But AsciiDoc has the special form:
-f::
--foo::
This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I expected git grep --name-only to give me only the file names,
much as git diff --name-only only generates filenames. Alas the
option is -l, which matches common external greps but doesn't match
other parts of the git UI.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/git-grep.txt: Document -F/--fixed-strings to
search for non-regexp patterns. Document -I to not search
binary files. Document -<num> as a shortcut for -C<num>.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This lets you say:
git grep --all-match -e A -e B -e C
to find lines that match A or B or C but limit the matches from
the files that have all of A, B and C.
This is different from
git grep -e A --and -e B --and -e C
in that the latter looks for a single line that has all of these
at the same time.
Signed-off-by: Junio C Hamano <junkio@cox.net>
By default, the command shows pathnames relative to the current
directory. Use --full-name (the same flag to do so in ls-files)
if you want to see the full pathname relative to the project root.
This makes it very pleasant to run in Emacs compilation (or
"grep-find") buffer.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some documentation "options" were followed by independent preformatted
paragraphs. Now they are associated plain text paragraphs. The
difference is clear in the generated html.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We forgot to make sure that there is no more than one pattern
parameter. Also when looking for files in a directory called
'--others', it passed that path limiter without preceding the
end-of-options marker '--' to underlying git-ls-files, which
misunderstood it as one of its options instead.
$ git grep --others -e Meta/Make Meta
$ git grep -o -e Meta/Make Meta
$ git grep -o Meta/Make Meta
look for a string "Meta/Make" from untracked files in Meta/
directory.
$ git grep Meta/Make --others
looks for the same string from tracked files in ./--others
directory.
On the other hand,
$ git grep -e Meta/Make --others
does not have a freestanding pattern, so everybody is parameter
and there is no path specifier. It looks for the string in all
the untracked files without any path limiter.
[jc: updated with usability enhancements and documentation
cleanups from Sean.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
In addition, also fixes a few synopses to be more consistent and a gitlink.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The replacement was performed automatically by these commands:
perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \
README Documentation/*.txt
perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \
README Documentation/*.txt
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
