@{-N} in "git checkout @{-N}" may refer to a detached HEAD state,
but the documentation was not clear about it, which has been fixed.
* ks/doc-checkout-previous:
Doc/checkout: checking out using @{-N} can lead to detached state
"git checkout --recursive" may overwrite and rewind the history of
the branch that happens to be checked out in submodule
repositories, which might not be desirable. Detach the HEAD but
still allow the recursive checkout to succeed in such a case.
* sb/submodule-recursive-checkout-detach-head:
Documentation/checkout: clarify submodule HEADs to be detached
recursive submodules: detach HEAD from new state
@{-N} is a syntax for the N-th last "checkout" and not the N-th
last "branch". Therefore, in some cases using `git checkout @{-$N}`
DOES lead to a "detached HEAD" state. This can also be ensured by
the commit message of 75d6e552a (Documentation: @{-N} can refer to
a commit, 2014-01-19) which clearly specifies how @{-N} can be used
to refer not only to a branch but also to a commit.
Correct the misleading sentence which states that @{-N} doesn't
detach HEAD.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are "git checkout [-p][<tree-ish>][--][<paths>...]" in the
SYNOPSIS section, and "git checkout [-p][<tree-ish>][--]<paths>..."
as the header for the section that explains the "check out paths
from index/tree-ish" mode. It is unclear if we require at least one
path, or it is entirely optional.
Actually, both are wrong. Without the "-p(atch)" option, you must
have <pathspec> (otherwise, with a commit that is a <tree-ish>, you
would be checking out that commit to build a new history on top of
it). With it, it is already clear that you are checking out paths,
it is optional. In other words, you cannot omit both.
The source of the confusion is that -p(atch) is described as if it
is just another "optional" part and its description is lumped
together with the non patch mode, even though the actual end user
experience is vastly different.
Let's split the entry into two, and describe the regular mode and
the patch mode separately. This allows us to make it clear that the
regular mode MUST be given at least one pathspec, that the patch
mode can be invoked with either '-p' or '--patch' but one of these
must be given, and that the pathspec is entirely optional in the
patch mode.
Also, revamp the explanation of "checkout paths" by removing
extraneous description at the beginning, that says "checking out
paths is not checking out a branch". Explaining what it is for and
when the user wants to use it upfront is the most direct way to help
the readers.
Noticed-by: Robert P J Day
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following are several fixes for duplicated words ("of of") and one
case where an extra article ("a") slipped in.
Signed-off-by: Evan Zacks <zackse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This exposes a flag to recurse into submodules
in builtin/checkout making use of the code implemented
in prior patches.
A new failure mode is introduced in the submodule
update library, as the directory/submodule conflict
is not solved in prior patches.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normally we err on the safe side: if something can be seen as both an
SHA1 and a pathspec, we stop and scream. In checkout, there is one
exception added in 859fdab (git-checkout: improve error messages, detect
ambiguities. - 2008-07-23), to allow the common case "git checkout
branch". Let's document this exception.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was common in our documentation to surround short option names with
forward quotes, which renders as italic in HTML. Instead, use backquotes
which renders as monospace. This is one more step toward conformance to
Documentation/CodingGuidelines.
This was obtained with:
perl -pi -e "s/'(-[a-z])'/\`\$1\`/g" *.txt
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Under normal circumstances, and like other git commands,
git checkout will write progress info to stderr if
attached to a terminal. This option allows progress
to be forced even if not using a terminal. Also,
progress can be skipped if using option --no-progress.
Signed-off-by: Edmundo Carmona Antoranz <eantoranz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A "rebase" replays changes of the local branch on top of something
else, as such they are placed in stage #3 and referred to as
"theirs", while the changes in the new base, typically a foreign
work, are placed in stage #2 and referred to as "ours". Clarify
the "checkout --ours/--theirs".
* se/doc-checkout-ours-theirs:
checkout: document subtlety around --ours/--theirs
Update to the "linked checkout" in 2.5.0-rc1.
Instead of "checkout --to" that does not do what "checkout"
normally does, move the functionality to "git worktree add".
* es/worktree-add: (24 commits)
Revert "checkout: retire --ignore-other-worktrees in favor of --force"
checkout: retire --ignore-other-worktrees in favor of --force
worktree: add: auto-vivify new branch when <branch> is omitted
worktree: add: make -b/-B default to HEAD when <branch> is omitted
worktree: extract basename computation to new function
checkout: require worktree unconditionally
checkout: retire --to option
tests: worktree: retrofit "checkout --to" tests for "worktree add"
worktree: add -b/-B options
worktree: add --detach option
worktree: add --force option
worktree: introduce "add" command
checkout: drop 'checkout_opts' dependency from prepare_linked_checkout
checkout: make --to unconditionally verbose
checkout: prepare_linked_checkout: drop now-unused 'new' argument
checkout: relocate --to's "no branch specified" check
checkout: fix bug with --to and relative HEAD
Documentation/git-worktree: add EXAMPLES section
Documentation/git-worktree: add high-level 'lock' overview
Documentation/git-worktree: split technical info from general description
...
This reverts commit 0d1a151783.
When trying to switch to a different branch, that happens to be
checked out in another working tree, the user shouldn't have to
give up the other safety measures (like protecting the local changes
that overlap the difference between the branches) while defeating
the "no two checkouts of the same branch" safety.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During a 'rebase' (hence 'pull --rebase'), --ours/--theirs may
appear to be swapped to those who are not aware of the fact that
they are temporarily playing the role of the keeper of the more
authoritative history.
Add a note to clarify.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Simon A. Eugster <simon.eugster@eps.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a safeguard, checking out a branch already checked out by a different
worktree is disallowed. This behavior can be overridden with
--ignore-other-worktrees, however, this option is neither obvious nor
particularly discoverable. As a common safeguard override, --force is
more likely to come to mind. Therefore, overload it to also suppress the
check for a branch already checked out elsewhere.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that "git worktree add" has achieved user-facing feature-parity with
"git checkout --to", retire the latter.
Move the actual linked worktree creation functionality,
prepare_linked_checkout() and its helpers, verbatim from checkout.c to
worktree.c.
This effectively reverts changes to checkout.c by 529fef2 (checkout:
support checking out into a new working directory, 2014-11-30) with the
exception of merge_working_tree() and switch_branches() which still
require specialized knowledge that a the checkout is occurring in a
newly-created linked worktree (signaled to them by the private
GIT_CHECKOUT_NEW_WORKTREE environment variable).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the git-worktree command exists, its documentation page is the
natural place for the linked worktree description to reside. Relocate
the "MULTIPLE WORKING TREES" description verbatim from git-checkout.txt
to git-worktree.txt.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was missed when "git prune --worktrees" became "git worktree prune".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git checkout <pathspec> can be used to reset changes in the working tree.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.
* nd/multiple-work-trees: (41 commits)
prune --worktrees: fix expire vs worktree existence condition
t1501: fix test with split index
t2026: fix broken &&-chain
t2026 needs procondition SANITY
git-checkout.txt: a note about multiple checkout support for submodules
checkout: add --ignore-other-wortrees
checkout: pass whole struct to parse_branchname_arg instead of individual flags
git-common-dir: make "modules/" per-working-directory directory
checkout: do not fail if target is an empty directory
t2025: add a test to make sure grafts is working from a linked checkout
checkout: don't require a work tree when checking out into a new one
git_path(): keep "info/sparse-checkout" per work-tree
count-objects: report unused files in $GIT_DIR/worktrees/...
gc: support prune --worktrees
gc: factor out gc.pruneexpire parsing code
gc: style change -- no SP before closing parenthesis
checkout: clean up half-prepared directories in --to mode
checkout: reject if the branch is already checked out elsewhere
prune: strategies for linked checkouts
checkout: support checking out into a new working directory
...
This should improve readability. Compare "thislongname" and
"thisLongName". The following keys are left in unchanged. We can
decide what to do with them later.
- am.keepcr
- core.autocrlf .safecrlf .trustctime
- diff.dirstat .noprefix
- gitcvs.usecrlfattr
- gui.blamehistoryctx .trustmtime
- pull.twohead
- receive.autogc
- sendemail.signedoffbycc .smtpsslcertpath .suppresscc
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The goal seems to be using multiple checkouts to reduce disk space.
But we have not reached an agreement how things should be. There are a
couple options.
- You may want to keep $SUB repos elsewhere (perhaps in a central
place) outside $SUPER. This is also true for nested submodules
where a superproject may be a submodule of another superproject.
- You may want to keep all $SUB repos in $SUPER/modules (or some
other place in $SUPER)
- We could even push it further and merge all $SUB repos into $SUPER
instead of storing them separately. But that would at least require
ref namespace enabled.
On top of that, git-submodule.sh expects $GIT_DIR/config to be
per-worktree, at least for the submodule.* part. Here I think we have
two options, either update config.c to also read
$GIT_DIR/config.worktree (which is per worktree) in addition to
$GIT_DIR/config (shared) and store worktree-specific vars in the new
place, or update git-submodule.sh to read/write submodule.* directly
from $GIT_DIR/config.submodule (per worktree).
These take time to address properly. Meanwhile, make a note to the
user that they should not use multiple worktrees in submodule context.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Noticed-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
(alias R=$GIT_COMMON_DIR/worktrees/<id>)
- linked checkouts are supposed to keep its location in $R/gitdir up
to date. The use case is auto fixup after a manual checkout move.
- linked checkouts are supposed to update mtime of $R/gitdir. If
$R/gitdir's mtime is older than a limit, and it points to nowhere,
worktrees/<id> is to be pruned.
- If $R/locked exists, worktrees/<id> is not supposed to be pruned. If
$R/locked exists and $R/gitdir's mtime is older than a really long
limit, warn about old unused repo.
- "git checkout --to" is supposed to make a hard link named $R/link
pointing to the .git file on supported file systems to help detect
the user manually deleting the checkout. If $R/link exists and its
link count is greated than 1, the repo is kept.
Helped-by: Marc Branchaud <marcnarc@xiplink.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout --to" sets up a new working directory with a .git file
pointing to $GIT_DIR/worktrees/<id>. It then executes "git checkout"
again on the new worktree with the same arguments except "--to" is
taken out. The second checkout execution, which is not contaminated
with any info from the current repository, will actually check out and
everything that normal "git checkout" does.
Helped-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The @{-N} syntax always referred to the N-th last thing checked out,
which can be either a branch or a commit (for detached HEAD cases).
However, the documentation only mentioned branches.
Edit in a "/commit" in the appropriate places.
Reported-by: Kevin <ikke@ikke.info>
Signed-off-by: Thomas Rast <tr@thomasrast.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the synopsis, the second form to detach HEAD at the named commit
labelled the argument as '<commit>'. While this is technically more
correct, because the feature to detach is not limited to the tip of
a named branch, it was found confusing and did not express the fact
that you have to give `--detach` if you are naming the commit you
want to detach HEAD at with a branch name.
Separate this case into two syntactical forms, mimicking the way how
the DESCRIPTION section shows this usage. Also update the text that
explains the syntax to name the commit to detach HEAD at to clarify.
Suggested-by: Benjamin Bergman <ben@benbergman.ca>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update "git checkout foo" that DWIMs the intended "upstream" and
turns it into "git checkout -t -b foo remotes/origin/foo" to
correctly take existing remote definitions into account.
The remote "origin" may be what uniquely map its own branch to
remotes/some/where/foo but that some/where may not be "origin".
* jh/checkout-auto-tracking:
glossary: Update and rephrase the definition of a remote-tracking branch
branch.c: Validate tracking branches with refspecs instead of refs/remotes/*
t9114.2: Don't use --track option against "svn-remote"-tracking branches
t7201.24: Add refspec to keep --track working
t3200.39: tracking setup should fail if there is no matching refspec.
checkout: Use remote refspecs when DWIMming tracking branches
t2024: Show failure to use refspec when DWIMming remote branch names
t2024: Add tests verifying current DWIM behavior of 'git checkout <branch>'
The DWIM mode of checkout allows you to run "git checkout foo" when there
is no existing local ref or path called "foo", and there is exactly _one_
remote with a remote-tracking branch called "foo". Git will automatically
create a new local branch called "foo" using the remote-tracking "foo" as
its starting point and configured upstream.
For example, consider the following unconventional (but perfectly valid)
remote setup:
[remote "origin"]
fetch = refs/heads/*:refs/remotes/origin/*
[remote "frotz"]
fetch = refs/heads/*:refs/remotes/frotz/nitfol/*
Case 1: Assume both "origin" and "frotz" have remote-tracking branches called
"foo", at "refs/remotes/origin/foo" and "refs/remotes/frotz/nitfol/foo"
respectively. In this case "git checkout foo" should fail, because there is
more than one remote with a "foo" branch.
Case 2: Assume only "frotz" have a remote-tracking branch called "foo". In
this case "git checkout foo" should succeed, and create a local branch "foo"
from "refs/remotes/frotz/nitfol/foo", using remote branch "foo" from "frotz"
as its upstream.
The current code hardcodes the assumption that all remote-tracking branches
must match the "refs/remotes/$remote/*" pattern (which is true for remotes
with "conventional" refspecs, but not true for the "frotz" remote above).
When running "git checkout foo", the current code looks for exactly one ref
matching "refs/remotes/*/foo", hence in the above example, it fails to find
"refs/remotes/frotz/nitfol/foo", which causes it to fail both case #1 and #2.
The better way to handle the above example is to actually study the fetch
refspecs to deduce the candidate remote-tracking branches for "foo"; i.e.
assume "foo" is a remote branch being fetched, and then map "refs/heads/foo"
through the refspecs in order to get the corresponding remote-tracking
branches "refs/remotes/origin/foo" and "refs/remotes/frotz/nitfol/foo".
Finally we check which of these happens to exist in the local repo, and
if there is exactly one, we have an unambiguous match for "git checkout foo",
and may proceed.
This fixes most of the failing tests introduced in the previous patch.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout -- <paths>" is usually used to restore all modified
files in <paths>. In sparse checkout mode, this command is overloaded
with another meaning: to add back all files in <paths> that are
excluded by sparse patterns.
As the former makes more sense for day-to-day use. Switch it to the
default and the latter enabled with --ignore-skip-worktree-bits.
While at there, add info/sparse-checkout to gitrepository-layout.txt
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the behavior implemented in 70c9ac2 (DWIM "git checkout
frotz" to "git checkout -b frotz origin/frotz").
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The forms of checkout that do not take a path are lumped together in
the DESCRIPTION section, but the description for this group is
dominated by explanation of the -b|-B form.
Split these apart for more clarity.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updated with help from Peff.
* jc/maint-checkout-fileglob-doc:
gitcli: contrast wildcard given to shell and to git
gitcli: formatting fix
Document file-glob for "git checkout -- '*.c'"
The synopsis said "checkout [-B branch]" to make it clear the branch
name is a parameter to the option, but the heading for the option
description was "-B::", not "-B branch::", making the documentation
misleading. There may be room in documentation pages of other
commands for similar improvements.
* jc/maint-doc-checkout-b-always-takes-branch-name:
doc: "git checkout -b/-B/--orphan" always takes a branch name
While the synopsis section makes it clear that the new branch name
is the parameter to these flags, the option description did not.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In asciidoc 7, backticks like `foo` produced a typographic
effect, but did not otherwise affect the syntax. In asciidoc
8, backticks introduce an "inline literal" inside which markup
is not interpreted. To keep compatibility with existing
documents, asciidoc 8 has a "no-inline-literal" attribute to
keep the old behavior. We enabled this so that the
documentation could be built on either version.
It has been several years now, and asciidoc 7 is no longer
in wide use. We can now decide whether or not we want
inline literals on their own merits, which are:
1. The source is much easier to read when the literal
contains punctuation. You can use `master~1` instead
of `master{tilde}1`.
2. They are less error-prone. Because of point (1), we
tend to make mistakes and forget the extra layer of
quoting.
This patch removes the no-inline-literal attribute from the
Makefile and converts every use of backticks in the
documentation to an inline literal (they must be cleaned up,
or the example above would literally show "{tilde}" in the
output).
Problematic sites were found by grepping for '`.*[{\\]' and
examined and fixed manually. The results were then verified
by comparing the output of "html2text" on the set of
generated html pages. Doing so revealed that in addition to
making the source more readable, this patch fixes several
formatting bugs:
- HTML rendering used the ellipsis character instead of
literal "..." in code examples (like "git log A...B")
- some code examples used the right-arrow character
instead of '->' because they failed to quote
- api-config.txt did not quote tilde, and the resulting
HTML contained a bogus snippet like:
<tt><sub></tt> foo <tt></sub>bar</tt>
which caused some parsers to choke and omit whole
sections of the page.
- git-commit.txt confused ``foo`` (backticks inside a
literal) with ``foo'' (matched double-quotes)
- mentions of `A U Thor <author@example.com>` used to
erroneously auto-generate a mailto footnote for
author@example.com
- the description of --word-diff=plain incorrectly showed
the output as "[-removed-] and {added}", not "{+added+}".
- using "prime" notation like:
commit `C` and its replacement `C'`
confused asciidoc into thinking that everything between
the first backtick and the final apostrophe were meant
to be inside matched quotes
- asciidoc got confused by the escaping of some of our
asterisks. In particular,
`credential.\*` and `credential.<url>.\*`
properly escaped the asterisk in the first case, but
literally passed through the backslash in the second
case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Describe '-p' as a short form of '--patch' in synopsis and options. Also
refer the reader to the patch mode description of git-add documentation.
Helped-by: Jeff King <peff@peff.net>
Mentored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Valentin Haenel <valentin.haenel@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
* uk/checkout-ambiguous-ref:
Rename t2019 with typo "amiguous" that meant "ambiguous"
checkout: rearrange update_refs_for_switch for clarity
checkout: introduce --detach synonym for "git checkout foo^{commit}"
checkout: split off a function to peel away branchname arg
checkout: fix bug with ambiguous refs
Conflicts:
builtin/checkout.c
The detached HEAD state is a source of much confusion for users
new to git. Here we try to document it better.
Reworked from http://article.gmane.org/gmane.comp.version-control.git/138440
Requested-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For example, one might use this when making a temporary merge to
test that two topics work well together.
Patch by Junio, with tests from Jeff King.
[jn: with some extra checks for bogus commandline usage]
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"remote branch" is a branch hosted in a remote repository, while
"remote-tracking branch" is a copy of such branch, hosted locally.
The distinction is subtle when the copy is up-to-date, but rather
fundamental to understand what "git fetch" and "git push" do.
This patch should fix all incorrect usages in Documentation/ directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The symmetric difference or merge-base operator ... as used by
rev-list and diff is actually three period characters. If it
gets replaced by an ellipsis glyph in the manual, that would
stop readers from copying and pasting it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
