When $HOME is misconfigured to point at an unreadable directory, we
used to complain and die. This loosens the check.
* jn/config-ignore-inaccessible:
config: allow inaccessible configuration under $HOME
'git-status --ignored' still scans the work tree twice to collect
untracked and ignored files, respectively.
fill_directory / read_directory already supports collecting untracked and
ignored files in a single directory scan. However, the DIR_COLLECT_IGNORED
flag to enable this has some git-add specific side-effects (e.g. it
doesn't recurse into ignored directories, so listing ignored files with
--untracked=all doesn't work).
The DIR_SHOW_IGNORED flag doesn't list untracked files and returns ignored
files in dir_struct.entries[] (instead of dir_struct.ignored[] as
DIR_COLLECT_IGNORED). DIR_SHOW_IGNORED is used all throughout git.
We don't want to break the existing API, so lets introduce a new flag
DIR_SHOW_IGNORED_TOO that lists untracked as well as ignored files similar
to DIR_COLLECT_FILES, but will recurse into sub-directories based on the
other flags as DIR_SHOW_IGNORED does.
In dir.c::read_directory_recursive, add ignored files to either
dir_struct.entries[] or dir_struct.ignored[] based on the flags. Also move
the DIR_COLLECT_IGNORED case here so that filling result lists is in a
common place.
In wt-status.c::wt_status_collect_untracked, use the new flag and read
results from dir_struct.ignored[]. Remove the extra fill_directory call.
builtin/check-ignore.c doesn't call fill_directory, setting the git-add
specific DIR_COLLECT_IGNORED flag has no effect here. Remove for clarity.
Update API documentation to reflect the changes.
Performance: with this patch, 'git-status --ignored' is typically as fast
as 'git-status'.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git-status --ignored' recursively scans directories up to three times:
1. To collect untracked files.
2. To collect ignored files.
3. When collecting ignored files, to check that an untracked directory
that potentially contains ignored files doesn't also contain untracked
files (i.e. isn't already listed as untracked).
Let's get rid of case 3 first.
Currently, read_directory_recursive returns a boolean whether a directory
contains the requested files or not (actually, it returns the number of
files, but no caller actually needs that), and DIR_SHOW_IGNORED specifies
what we're looking for.
To be able to test for both untracked and ignored files in a single scan,
we need to return a bit more info, and the result must be independent of
the DIR_SHOW_IGNORED flag.
Reuse the path_treatment enum as return value of read_directory_recursive.
Split path_handled in two separate values path_excluded and path_untracked
that don't change their meaning with the DIR_SHOW_IGNORED flag. We don't
need an extra value path_untracked_and_excluded, as directories with both
untracked and ignored files should be listed as untracked.
Rename path_ignored to path_none for clarity (i.e. "don't treat that path"
in contrast to "the path is ignored and should be treated according to
DIR_SHOW_IGNORED").
Replace enum directory_treatment with path_treatment. That's just another
enum with the same meaning, no need to translate back and forth.
In treat_directory, get rid of the extra read_directory_recursive call and
all the DIR_SHOW_IGNORED-specific code.
In read_directory_recursive, decide whether to dir_add_name path_excluded
or path_untracked paths based on the DIR_SHOW_IGNORED flag.
The return value of read_directory_recursive is the maximum path_treatment
of all files and sub-directories. In the check_only case, abort when we've
reached the most significant value (path_untracked).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Checking if a file is in the index is much faster (hashtable lookup) than
checking if the file is excluded (linear search over exclude patterns).
Skip is_excluded checks for files: move the cache_name_exists check from
treat_file to treat_one_path and return early if the file is tracked.
This can safely be done as all other code paths also return path_ignored
for tracked files, and dir_add_ignored skips tracked files as well.
There's just one line left in treat_file, so move this to treat_one_path
as well.
Here's some performance data for git-status from the linux and WebKit
repos (best of 10 runs on a Debian Linux on SSD, core.preloadIndex=true):
| status | status --ignored
| linux | WebKit | linux | WebKit
-------+-------+--------+-------+---------
before | 0.218 | 1.583 | 0.321 | 2.579
after | 0.156 | 0.988 | 0.202 | 1.279
gain | 1.397 | 1.602 | 1.589 | 2.016
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The is_excluded and is_path_excluded APIs are very similar, except for a
few noteworthy differences:
is_excluded doesn't handle ignored directories, results for paths within
ignored directories are incorrect. This is probably based on the premise
that recursive directory scans should stop at ignored directories, which
is no longer true (in certain cases, read_directory_recursive currently
calls is_excluded *and* is_path_excluded to get correct ignored state).
is_excluded caches parsed .gitignore files of the last directory in struct
dir_struct. If the directory changes, it finds a common parent directory
and is very careful to drop only as much state as necessary. On the other
hand, is_excluded will also read and parse .gitignore files in already
ignored directories, which are completely irrelevant.
is_path_excluded correctly handles ignored directories by checking if any
component in the path is excluded. As it uses is_excluded internally, this
unfortunately forces is_excluded to drop and re-read all .gitignore files,
as there is no common parent directory for the root dir.
is_path_excluded tracks state in a separate struct path_exclude_check,
which is essentially a wrapper of dir_struct with two more fields. However,
as is_path_excluded also modifies dir_struct, it is not possible to e.g.
use multiple path_exclude_check structures with the same dir_struct in
parallel. The additional structure just unnecessarily complicates the API.
Teach is_excluded / prep_exclude about ignored directories: whenever
entering a new directory, first check if the entire directory is excluded.
Remember the excluded state in dir_struct. Don't traverse into already
ignored directories (i.e. don't read irrelevant .gitignore files).
Directories could also be excluded by exclude patterns specified on the
command line or .git/info/exclude, so we cannot simply skip prep_exclude
entirely if there's no .gitignore file name (dir_struct.exclude_per_dir).
Move this check to just before actually reading the file.
is_path_excluded is now equivalent to is_excluded, so we can simply
redirect to it (the public API is cleaned up in the next patch).
The performance impact of the additional ignored check per directory is
hardly noticeable when reading directories recursively (e.g. 'git status').
However, performance of git commands using the is_path_excluded API (e.g.
'git ls-files --cached --ignored --exclude-standard') is greatly improved
as this no longer re-reads .gitignore files on each call.
Here's some performance data from the linux and WebKit repos (best of 10
runs on a Debian Linux on SSD, core.preloadIndex=true):
| ls-files -ci | status | status --ignored
| linux | WebKit | linux | WebKit | linux | WebKit
-------+-------+--------+-------+--------+-------+---------
before | 0.506 | 6.539 | 0.212 | 1.555 | 0.323 | 2.541
after | 0.080 | 1.191 | 0.218 | 1.583 | 0.321 | 2.579
gain | 6.325 | 5.490 | 0.972 | 0.982 | 1.006 | 0.985
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The notion of "ignored tracked" directories introduced in 721ac4ed "dir.c:
Make git-status --ignored more consistent" has a few unwanted side effects:
- git-clean -d -X: deletes ignored tracked directories. git-clean should
never delete tracked content.
- git-ls-files --ignored --other --directory: lists ignored tracked
directories instead of "other" directories.
- git-status --ignored: lists ignored tracked directories while contained
files may be listed as modified. Paths listed by git-status should be
disjoint (except in long format where a path may be listed in both the
staged and unstaged section).
Additionally, the current behaviour violates documentation in gitignore(5)
("Specifies intentionally *untracked* files to ignore") and Documentation/
technical/api-directory-listing.txt ("DIR_SHOW_OTHER_DIRECTORIES: Include
a directory that is *not tracked*.").
In dir.c::treat_directory, remove the special handling of ignored tracked
directories, so that the DIR_SHOW_OTHER_DIRECTORIES flag only affects
"other" (i.e. untracked) directories. In dir.c::dir_add_name, check that
added paths are untracked even if DIR_SHOW_IGNORED is set.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git-status --ignored path/' doesn't list ignored files and directories
within 'path' if some component of 'path' is classified as untracked.
Disable the DIR_SHOW_OTHER_DIRECTORIES flag while traversing leading
directories. This prevents treat_leading_path() with DIR_SHOW_IGNORED flag
from aborting at the top level untracked directory.
As a side effect, this also eliminates a recursive directory scan per
leading directory level, as treat_directory() can no longer call
read_directory_recursive() when called from treat_leading_path().
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git-status --ignored' lists empty untracked directories as ignored, even
though they don't have any ignored files.
When checking if a directory is already listed as untracked (i.e. shouldn't
be listed as ignored as well), don't assume that the directory has only
ignored files if it doesn't have untracked files, as the directory may be
empty.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git-ls-files --ignored --directories' hides empty directories even though
--no-empty-directory was not specified.
Treat the DIR_HIDE_EMPTY_DIRECTORIES flag independently from
DIR_SHOW_IGNORED to make all git-ls-files options work as expected.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git-status --ignored' lists ignored tracked directories without any
ignored files if a tracked file happens to match an exclude pattern.
Always exclude tracked files.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git-status --ignored' lists both the ignored directory and the ignored
files if the files are in a tracked sub directory.
When recursing into sub directories in read_directory_recursive, pass on
the check_only parameter so that we don't accidentally add the files.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git-status --ignored' drops ignored directories if they contain untracked
files in an untracked sub directory.
Fix it by getting exact (recursive) excluded status in treat_directory.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The changes v1.7.12.1~2^2~4 (config: warn on inaccessible files,
2012-08-21) and v1.8.1.1~22^2~2 (config: treat user and xdg config
permission problems as errors, 2012-10-13) were intended to prevent
important configuration (think "[transfer] fsckobjects") from being
ignored when the configuration is unintentionally unreadable (for
example with EIO on a flaky filesystem, or with ENOMEM due to a DoS
attack). Usually ~/.gitconfig and ~/.config/git are readable by the
current user, and if they aren't then it would be easy to fix those
permissions, so the damage from adding this check should have been
minimal.
Unfortunately the access() check often trips when git is being run as
a server. A daemon (such as inetd or git-daemon) starts as "root",
creates a listening socket, and then drops privileges, meaning that
when git commands are invoked they cannot access $HOME and die with
fatal: unable to access '/root/.config/git/config': Permission denied
Any patch to fix this would have one of three problems:
1. We annoy sysadmins who need to take an extra step to handle HOME
when dropping privileges (the current behavior, or any other
proposal that they have to opt into).
2. We annoy sysadmins who want to set HOME when dropping privileges,
either by making what they want to do impossible, or making them
set an extra variable or option to accomplish what used to work
(e.g., a patch to git-daemon to set HOME when --user is passed).
3. We loosen the check, so some cases which might be noteworthy are
not caught.
This patch is of type (3).
Treat user and xdg configuration that are inaccessible due to
permissions (EACCES) as though no user configuration was provided at
all.
An alternative method would be to check if $HOME is readable, but that
would not help in cases where the user who dropped privileges had a
globally readable HOME with only .config or .gitconfig being private.
This does not change the behavior when /etc/gitconfig or .git/config
is unreadable (since those are more serious configuration errors),
nor when ~/.gitconfig or ~/.config/git is unreadable due to problems
other than permissions.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A handful of test cases and a corner case bugfix for "git rm".
* jk/rm-removed-paths:
t3600: document failure of rm across symbolic links
t3600: test behavior of reverse-d/f conflict
rm: do not complain about d/f conflicts during deletion
A pattern "dir" (without trailing slash) in the attributes file
stopped matching a directory "dir" by mistake with an earlier change
that wanted to allow pattern "dir/" to also match.
* jc/directory-attrs-regression-fix:
t: check that a pattern without trailing slash matches a directory
dir.c::match_pathname(): pay attention to the length of string parameters
dir.c::match_pathname(): adjust patternlen when shifting pattern
dir.c::match_basename(): pay attention to the length of string parameters
attr.c::path_matches(): special case paths that end with a slash
attr.c::path_matches(): the basename is part of the pathname
If we used to have an index entry "d/f", but "d" has been
replaced by a non-directory entry, the user may still want
to run "git rm" to delete the stale index entry. They could
use "git rm --cached" to just touch the index, but "git rm"
should also work: we explicitly try to handle the case that
the file has already been removed from the working tree.
However, because unlinking "d/f" in this case will not yield
ENOENT, but rather ENOTDIR, we do not notice that the file
is already gone. Instead, we report it as an error.
The simple solution is to treat ENOTDIR in this case exactly
like ENOENT; all we want to know is whether the file is
already gone, and if a leading path is no longer a
directory, then by definition the sub-path is gone.
Reported-by: jpinheiro <7jpinheiro@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix 1.8.1.x regression that stopped matching "dir" (without
trailing slash) to a directory "dir".
* jc/directory-attrs-regression-fix:
t: check that a pattern without trailing slash matches a directory
dir.c::match_pathname(): pay attention to the length of string parameters
dir.c::match_pathname(): adjust patternlen when shifting pattern
dir.c::match_basename(): pay attention to the length of string parameters
attr.c::path_matches(): special case paths that end with a slash
attr.c::path_matches(): the basename is part of the pathname
This function takes two counted strings: a <pattern, patternlen> pair
and a <pathname, pathlen> pair. But we end up feeding the result to
fnmatch, which expects NUL-terminated strings.
We can fix this by calling the fnmatch_icase_mem function, which
handles re-allocating into a NUL-terminated string if necessary.
While we're at it, we can avoid even calling fnmatch in some cases. In
addition to patternlen, we get "prefix", the size of the pattern that
contains no wildcard characters. We do a straight match of the prefix
part first, and then use fnmatch to cover the rest. But if there are
no wildcards in the pattern at all, we do not even need to call
fnmatch; we would simply be comparing two empty strings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we receive a pattern that starts with "/", we shift it
forward to avoid looking at the "/" part. Since the prefix
and patternlen parameters are counts of what is in the
pattern, we must decrement them as we increment the pointer.
We remembered to handle prefix, but not patternlen. This
didn't cause any bugs, though, because the patternlen
parameter is not actually used. Since it will be used in
future patches, let's correct this oversight.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function takes two counted strings (<basename, basenamelen> and
<pattern, patternlen>) as parameters, together with prefix (the
length of the prefix in pattern that is to be matched literally
without globbing against the basename) and EXC_* flags that tells it
how to match the pattern against the basename.
However, it did not pay attention to the length of these counted
strings. Update them to do the following:
* When the entire pattern is to be matched literally, the pattern
matches the basename only when the lengths of them are the same,
and they match up to that length.
* When the pattern is "*" followed by a string to be matched
literally, make sure that the basenamelen is equal or longer than
the "literal" part of the pattern, and the tail of the basename
string matches that literal part.
* Otherwise, use the new fnmatch_icase_mem helper to make
sure we only lookmake sure we use only look at the
counted part of the strings. Because these counted strings are
full strings most of the time, we check for termination
to avoid unnecessary allocation.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Output from "git status --ignored" did not work well when used with
"--untracked".
* ap/status-ignored-in-ignored-directory:
status: always report ignored tracked directories
git-status: Test --ignored behavior
dir.c: Make git-status --ignored more consistent
Replace our use of fnmatch(3) with a more feature-rich wildmatch.
A handful patches at the bottom have been moved to nd/wildmatch to
graduate as part of that branch, before this series solidifies.
We may want to mark USE_WILDMATCH as an experimental curiosity a
bit more clearly (i.e. should not be enabled in production
environment, because it will make the behaviour between builds
unpredictable).
* nd/retire-fnmatch:
Makefile: add USE_WILDMATCH to use wildmatch as fnmatch
wildmatch: advance faster in <asterisk> + <literal> patterns
wildmatch: make a special case for "*/" with FNM_PATHNAME
test-wildmatch: add "perf" command to compare wildmatch and fnmatch
wildmatch: support "no FNM_PATHNAME" mode
wildmatch: make dowild() take arbitrary flags
wildmatch: rename constants and update prototype
Add a new command "git check-ignore" for debugging .gitignore
files.
The variable names may want to get cleaned up but that can be done
in-tree.
* as/check-ignore:
clean.c, ls-files.c: respect encapsulation of exclude_list_groups
t0008: avoid brace expansion
add git-check-ignore sub-command
setup.c: document get_pathspec()
add.c: extract new die_if_path_beyond_symlink() for reuse
add.c: extract check_path_for_gitlink() from treat_gitlinks() for reuse
pathspec.c: rename newly public functions for clarity
add.c: move pathspec matchers into new pathspec.c for reuse
add.c: remove unused argument from validate_pathspec()
dir.c: improve docs for match_pathspec() and match_pathspec_depth()
dir.c: provide clear_directory() for reclaiming dir_struct memory
dir.c: keep track of where patterns came from
dir.c: use a single struct exclude_list per source of excludes
Conflicts:
builtin/ls-files.c
dir.c
Output from "git status --ignored" showed an unexpected interaction
with "--untracked".
* ap/status-ignored-in-ignored-directory:
status: always report ignored tracked directories
git-status: Test --ignored behavior
dir.c: Make git-status --ignored more consistent
Refactor and generally clean up the directory traversal API
implementation.
* as/dir-c-cleanup:
dir.c: rename free_excludes() to clear_exclude_list()
dir.c: refactor is_path_excluded()
dir.c: refactor is_excluded()
dir.c: refactor is_excluded_from_list()
dir.c: rename excluded() to is_excluded()
dir.c: rename excluded_from_list() to is_excluded_from_list()
dir.c: rename path_excluded() to is_path_excluded()
dir.c: rename cryptic 'which' variable to more consistent name
Improve documentation and comments regarding directory traversal API
api-directory-listing.txt: update to match code
Allows pathname patterns in .gitignore and .gitattributes files
with double-asterisks "foo/**/bar" to match any number of directory
hierarchies.
* nd/wildmatch:
wildmatch: replace variable 'special' with better named ones
compat/fnmatch: respect NO_FNMATCH* even on glibc
wildmatch: fix "**" special case
t3070: Disable some failing fnmatch tests
test-wildmatch: avoid Windows path mangling
Support "**" wildcard in .gitignore and .gitattributes
wildmatch: make /**/ match zero or more directories
wildmatch: adjust "**" behavior
wildmatch: fix case-insensitive matching
wildmatch: remove static variable force_lower_case
wildmatch: make wildmatch's return value compatible with fnmatch
t3070: disable unreliable fnmatch tests
Integrate wildmatch to git
wildmatch: follow Git's coding convention
wildmatch: remove unnecessary functions
Import wildmatch from rsync
ctype: support iscntrl, ispunct, isxdigit and isprint
ctype: make sane_ctype[] const array
Conflicts:
Makefile
When enumerating paths that are ignored, paths the index knows
about are not included in the result. The "index knows about"
check is done by consulting the name hash, not the actual
contents of the index:
- When core.ignorecase is false, directory names are not in the
name hash, and ignored ones are shown as ignored (directories
can never be tracked anyway).
- When core.ignorecase is true, however, the name hash keeps
track of the names of directories, in order to detect
additions of the paths under different cases. This causes
ignored directories to be mistakenly excluded when
enumerating ignored paths.
Stop excluding directories that are in the name hash when
looking for ignored files in dir_add_name(); the names that are
actually in the index are excluded much earlier in the callchain
in treat_file(), so this fix will not make them mistakenly
identified as ignored.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a grammatical issue in the description of these functions, and
make it more obvious how and why seen[] can be reused across multiple
invocations.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By the end of a directory traversal, a dir_struct instance will
typically contains pointers to various data structures on the heap.
clear_directory() provides a convenient way to reclaim that memory.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For exclude patterns read in from files, the filename is stored in the
exclude list, and the originating line number is stored in the
individual exclude (counting starting at 1).
For exclude patterns provided on the command line, a string describing
the source of the patterns is stored in the exclude list, and the
sequence number assigned to each exclude pattern is negative, with
counting starting at -1. So for example the 2nd pattern provided via
--exclude would be numbered -2. This allows any future consumers of
that data to easily distinguish between exclude patterns from files
vs. from the CLI.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously each exclude_list could potentially contain patterns
from multiple sources. For example dir->exclude_list[EXC_FILE]
would typically contain patterns from .git/info/exclude and
core.excludesfile, and dir->exclude_list[EXC_DIRS] could contain
patterns from multiple per-directory .gitignore files during
directory traversal (i.e. when dir->exclude_stack was more than
one item deep).
We split these composite exclude_lists up into three groups of
exclude_lists (EXC_CMDL / EXC_DIRS / EXC_FILE as before), so that each
exclude_list now contains patterns from a single source. This will
allow us to cleanly track the origin of each pattern simply by adding
a src field to struct exclude_list, rather than to struct exclude,
which would make memory management of the source string tricky in the
EXC_DIRS case where its contents are dynamically generated.
Similarly, by moving the filebuf member from struct exclude_stack to
struct exclude_list, it allows us to track and subsequently free
memory buffers allocated during the parsing of all exclude files,
rather than only tracking buffers allocated for files in the EXC_DIRS
group.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow scripts to feed literal paths to commands that take
pathspecs, by disabling wildcard globbing.
* jk/pathspec-literal:
add global --literal-pathspecs option
Conflicts:
dir.c
The current behavior of git-status is inconsistent and misleading.
Especially when used with --untracked-files=all option:
- files ignored in untracked directories will be missing from
status output.
- untracked files in committed yet ignored directories are also
missing.
- with --untracked-files=normal, untracked directories that
contains only ignored files are dropped too.
Make the behavior more consistent across all possible use cases:
- "--ignored --untracked-files=normal" doesn't show each specific
files but top directory. It instead shows untracked directories
that only contains ignored files, and ignored tracked directories
with untracked files.
- "--ignored --untracked-files=all" shows all ignored files, either
because it's in an ignored directory (tracked or untracked), or
because the file is explicitly ignored.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far, wildmatch() has always honoured directory boundary and there
was no way to turn it off. Make it behave more like fnmatch() by
requiring all callers that want the FNM_PATHNAME behaviour to pass
that in the equivalent flag WM_PATHNAME. Callers that do not specify
WM_PATHNAME will get wildcards like ? and * in their patterns matched
against '/', just like not passing FNM_PATHNAME to fnmatch().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- All exported constants now have a prefix WM_
- Do not rely on FNM_* constants, use the WM_ counterparts
- Remove TRUE and FALSE to follow Git's coding style
- While at it, turn flags type from int to unsigned int
- Add an (unused yet) argument to carry extra information
so that we don't have to change the prototype again later
when we need to pass other stuff to wildmatch
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is clearer to use a 'clear_' prefix for functions which empty
and deallocate the contents of a data structure without freeing
the structure itself, and a 'free_' prefix for functions which
also free the structure itself.
http://article.gmane.org/gmane.comp.version-control.git/206128
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar way to the previous commit, this extracts a new helper
function last_exclude_matching_path() which return the last
exclude_list element which matched, or NULL if no match was found.
is_path_excluded() becomes a wrapper around this, and just returns 0
or 1 depending on whether any matching exclude_list element was found.
This allows callers to find out _why_ a given path was excluded,
rather than just whether it was or not, paving the way for a new git
sub-command which allows users to test their exclude lists from the
command line.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar way to the previous commit, this extracts a new helper
function last_exclude_matching() which returns the last exclude_list
element which matched, or NULL if no match was found. is_excluded()
becomes a wrapper around this, and just returns 0 or 1 depending on
whether any matching exclude_list element was found.
This allows callers to find out _why_ a given path was excluded,
rather than just whether it was or not, paving the way for a new git
sub-command which allows users to test their exclude lists from the
command line.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The excluded function uses a new helper function called
last_exclude_matching_from_list() to perform the inner loop over all of
the exclude patterns. The helper just tells us whether the path is
included, excluded, or undecided.
However, it may be useful to know _which_ pattern was triggered. So
let's pass out the entire exclude match, which contains the status
information we were already passing out.
Further patches can make use of this.
This is a modified forward port of a patch from 2009 by Jeff King:
http://article.gmane.org/gmane.comp.version-control.git/108815
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continue adopting clearer names for exclude functions. This is_*
naming pattern for functions returning booleans was discussed here:
http://thread.gmane.org/gmane.comp.version-control.git/204661/focus=204924
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continue adopting clearer names for exclude functions. This 'is_*'
naming pattern for functions returning booleans was discussed here:
http://thread.gmane.org/gmane.comp.version-control.git/204661/focus=204924
Also adjust their callers as necessary.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start adopting clearer names for exclude functions. This 'is_*'
naming pattern for functions returning booleans was agreed here:
http://thread.gmane.org/gmane.comp.version-control.git/204661/focus=204924
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'el' is only *slightly* less cryptic, but is already used as the
variable name for a struct exclude_list pointer in numerous other
places, so this reduces the number of cryptic variable names in use by
one :-)
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
traversal API has a few potentially confusing properties. These
comments clarify a few key aspects and will hopefully make it easier
to understand for other newcomers in the future.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git takes pathspec arguments in many places to limit the
scope of an operation. These pathspecs are treated not as
literal paths, but as glob patterns that can be fed to
fnmatch. When a user is giving a specific pattern, this is a
nice feature.
However, when programatically providing pathspecs, it can be
a nuisance. For example, to find the latest revision which
modified "$foo", one can use "git rev-list -- $foo". But if
"$foo" contains glob characters (e.g., "f*"), it will
erroneously match more entries than desired. The caller
needs to quote the characters in $foo, and even then, the
results may not be exactly the same as with a literal
pathspec. For instance, the depth checks in
match_pathspec_depth do not kick in if we match via fnmatch.
This patch introduces a global command-line option (i.e.,
one for "git" itself, not for specific commands) to turn
this behavior off. It also has a matching environment
variable, which can make it easier if you are a script or
porcelain interface that is going to issue many such
commands.
This option cannot turn off globbing for particular
pathspecs. That could eventually be done with a ":(noglob)"
magic pathspec prefix. However, that level of granularity is
more cumbersome to use for many cases, and doing ":(noglob)"
right would mean converting the whole codebase to use
"struct pathspec", as the usual "const char **pathspec"
cannot represent extra per-item flags.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a pattern contains only a single asterisk as wildcard,
e.g. "foo*bar", after literally comparing the leading part "foo" with
the string, we can compare the tail of the string and make sure it
matches "bar", instead of running fnmatch() on "*bar" against the
remainder of the string.
-O2 build on linux-2.6, without the patch:
$ time git rev-list --quiet HEAD -- '*.c'
real 0m40.770s
user 0m40.290s
sys 0m0.256s
With the patch
$ time ~/w/git/git rev-list --quiet HEAD -- '*.c'
real 0m34.288s
user 0m33.997s
sys 0m0.205s
The above command is not supposed to be widely popular. It's chosen
because it exercises pathspec matching a lot. The point is it cuts
down matching time for popular patterns like *.c, which could be used
as pathspec in other places.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
