Commit 7328482253 (repack: disable bitmaps-by-default if .keep files
exist, 2019-06-29) taught repack to prefer disabling bitmaps to
duplicating objects (unless bitmaps were asked for explicitly).
But there's an easier way to do this: if we keep passing the
--honor-pack-keep flag to pack-objects when auto-enabling bitmaps, then
pack-objects already makes the same decision (it will disable bitmaps
rather than duplicate). Better still, pack-objects can actually decide
to do so based not just on the presence of a .keep file, but on whether
that .keep file actually impacts the new pack we're making (so if we're
racing with a push or fetch, for example, their temporary .keep file
will not block us from generating bitmaps if they haven't yet updated
their refs).
And because repack uses the --write-bitmap-index-quiet flag, we don't
have to worry about pack-objects generating confusing warnings when it
does see a .keep file. We can confirm this by tweaking the .keep test to
check repack's stderr.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on various config options, a full repack may not be able to
build a reachability bitmap index (e.g., if pack.packSizeLimit forces us
to write multiple packs). In these cases pack-objects may write a
warning to stderr.
Since 36eba0323d (repack: enable bitmaps by default on bare repos,
2019-03-14), we may generate these warnings even when the user did not
explicitly ask for bitmaps. This has two downsides:
- it can be confusing, if they don't know what bitmaps are
- a daemonized auto-gc will write this to its log file, and the
presence of the warning may suppress further auto-gc (until
gc.logExpiry has elapsed)
Let's have repack communicate to pack-objects that the choice to turn on
bitmaps was not made explicitly by the user, which in turn allows
pack-objects to suppress these warnings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After our test snippet finishes, the .keep file is left in place, making
it hard to do further tests of the auto-bitmap-writing code (since it
suppresses the feature completely). Let's clean it up.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The iteration order of a hashmap is undefined, and may depend on things
like the exact set of items added, or the table has been grown or
shrunk. In the case of an oidmap, it even depends on endianness, because
we take the oid hash by casting sha1 bytes directly into an unsigned
int.
Let's sort the test-tool output from any hash iterators. In the case of
t0011, this is just future-proofing. But for t0016, it actually fixes a
reported failure on the big-endian s390 and nonstop ports.
I didn't bother to teach the helper functions to optionally sort output.
They are short enough that it's simpler to just repeat them inline for
the iteration tests than it is to add a --sort option.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few tests printed 'errno' as an integer and compared with
hardcoded integers; this is obviously not portable.
A two things to note are:
- the string obtained by strerror() is not portable, and cannot be
used for the purpose of these tests.
- there unfortunately isn't a portable way to map error numbers to
error names.
As we only care about a few selected errors, just map the error
number to the name before emitting for comparison.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
-----BEGIN PGP SIGNATURE-----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=kdAI
-----END PGP SIGNATURE-----
Merge tag 'v2.23.0-rc0' of git://git.kernel.org/pub/scm/git/git
Git 2.23-rc0
* tag 'v2.23.0-rc0' of git://git.kernel.org/pub/scm/git/git: (420 commits)
Git 2.23-rc0
Merge fixes made on the 'master' front
Flush fixes up to the third batch post 2.22.0
The seventh batch
git: mark cmd_rebase as requiring a worktree
rebase: fix white-space
xdiff: clamp function context indices in post-image
grep: print the pcre2_jit_on value
t6200: use test_commit_bulk
travis-ci: build with GCC 4.8 as well
The sixth batch
clean: show an error message when the path is too long
CodingGuidelines: spell out post-C89 rules
README: fix rendering of text in angle brackets
rm: resolving by removal is not a warning-worthy event
transport-helper: avoid var decl in for () loop control
stash: fix handling removed files with --keep-index
mingw: support spawning programs containing spaces in their names
gpg-interface: do not scan past the end of buffer
tests: defang pager tests by explicitly disabling the log.mailmap warning
...
This is one of the few places where Git violates its own deprecation of
the dashed form. It is not necessary, either.
As of 595d59e2b5 (git.c: ignore pager.* when launching builtin as
dashed external, 2017-08-02), Git wants to ignore the pager.* config
setting when expanding aliases. So let's strip out the
check_pager_config(<command-name>) call from the copy-edited code.
This code actually made it into upstream git.git already, but it was
disabled in `#if 0 ... #endif` guards so far.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When compiling with Visual Studio, the projects' names are identical to
the executables modulo the extensions. Read: there will exist both a
directory called `git` as well as an executable called `git.exe` in the
end. Which means that the bin-wrappers *need* to target the `.exe` files
lest they try to execute directories.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the Microsoft .manifest pattern, and do not anchor the 'Debug'
and 'Release' entries at the top-level directory, to allow for
multiple projects (one per target).
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default location for `.exe` files linked by Visual Studio depends on
the mode (debug vs release) and the architecture. Meaning: after a full
build, there is a `git.exe` in the top-level directory, but none of the
built-ins are linked..
When running a test script in Git Bash, it therefore would pick up the
wrong, say, `git-receive-pack.exe`: the one installed at the same time
as the Git Bash.
Absolutely not what we want. We want to have confidence that our test
covers the MSVC-built Git executables, and not some random stuff.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The entire idea of generating the VS solution makes only sense if we
generate it via Continuous Integration; otherwise potential users would
still have to download the entire Git for Windows SDK.
If we pre-generate the Visual Studio solution, Git can be built entirely
within Visual Studio, and the test scripts can be run in a regular Git
for Windows (e.g. the Portable Git flavor, which does not include a full
GCC toolchain and therefore weighs only about a tenth of Git for
Windows' SDK).
So let's just add a target in the Makefile that can be used to generate
said solution; The generated files will then be committed so that they
can be pushed to a branch ready to check out by Visual Studio users.
To make things even more useful, we also generate and commit other files
that are required to run the test suite, such as templates and
bin-wrappers: with this, developers can run the test suite in a regular
Git Bash after building the solution in Visual Studio.
Note: for this build target, we do not actually need to initialize the
`vcpkg` system, so we don't.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Based on the previous patches in this patch series that fixed the
generator for `.vcproj` files (which were used by Visual Studio prior to
2015 to define projects), this patch offers to generate project
definitions for neweer versions of Visual Studio (which use `.vcxproj`
files).
To that end, this patch copy-edits the generator of the `.vcproj`.
In addition, we now use the `vcpkg` system which allows us to build
Git's dependencies (e.g. curl, libexpat) conveniently. The support
scripts were introduced in the `jh/msvc` patch series, and with this
patch we initialize the `vcpkg` conditionally, in the `libgit` project's
`PreBuildEvent`. To allow for parallel building of the projects, we
therefore put `libgit` at the bottom of the project hierarchy.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the recent changes to allow building with MSVC=1, we now pass the
/OPT:REF option to the compiler. This confuses the parser that wants to
turn the output of a dry run into project definitions for QMake and Visual
Studio:
Unhandled link option @ line 213: /OPT:REF at [...]
Let's just extend the code that passes through options that start with a
dash, so that it passes through options that start with a slash, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a dependency required for the non-smart HTTP backend.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's test suite shows tons of breakages unless Git is compiled
*without* NO_ICONV. That means, in turn, that we need to generate
build definitions *with* libiconv, which in turn implies that we
have to handle the -liconv option properly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Upon seeing the '-lcurl' option, point to the libcurl.lib.
While there, fix the elsif indentation.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One time too many did this developer call the `generate` script passing
a `--make-out=<PATH>` option that was happily ignored (because there
should be a space, not an equal sign, between `--make-out` and the
path).
And one time too many, this script not only ignored it but did not even
complain. Let's fix that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an option for capturing the output of the make dry-run used in
determining the msvc-build structure for easy debugging.
You can use the output of `--make-out <path>` in subsequent runs via the
`--in <path>` option.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than swallowing the errors, it is better to have them in a file.
To make it obvious what this is about, use the file name
'msvc-build-makedryerrors.txt'.
Further, if the output is empty, simply delete that file. As we target
Git for Windows' SDK (which, unlike its predecessor msysGit, offers Perl
versions newer than 5.8), we can use the quite readable syntax `if -f -z
$ErrsFile` (available in Perl >=5.10).
Note that the file will contain the new values of the GIT_VERSION and
GITGUI_VERSION if they were generated by the make file. They are omitted
if the release is tagged and indentically defined in their respective
GIT_VERSION_GEN file DEF_VER variables.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's build contains steps to handle internationalization. This caused
hiccups in the parser used to generate QMake/Visual Studio project files.
As those steps are irrelevant in this context, let's just ignore them.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The engine.pl script expects file names not to contain spaces. However,
paths with spaces are quite prevalent on Windows. Use shellwords() rather
than split() to parse them correctly.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message talked about a "lib option", but it clearly referred
to a link option.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Generators/ directory can contain spurious files such as editors'
backup files. Even worse, there could be .swp files which are not even
valid Perl scripts.
Let's just ignore anything but .pm files in said directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 4b623d8 (MSVC: link in invalidcontinue.obj for better POSIX
compatibility, 2014-03-29), invalidcontinue.obj is linked in the MSVC
build, but it was not parsed correctly by the buildsystem. Ignore it, as
it is known to Visual Studio and will be handled elsewhere.
Also only substitute filenames ending with .o when generating the
source .c filename, otherwise we would start to expect .cbj files to
generate .obj files (which are not generated by our build)...
In the future there may be source files that produce .obj files
so keep the two issues (.obj files with & without source files)
separate.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Duncan Smart <duncan.smart@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not necessary, and Visual Studio 2015 no longer supports it, anyway.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Visual Studio takes the first listed application/library as the default
startup project [1].
Detect the 'git' project and place it at the head of the project list,
rather than at the tail.
Export the apps list before libs list for both the projects and global
structures of the .sln file.
[1] http://stackoverflow.com/questions/1238553/
vs2008-where-is-the-startup-project-setting-stored-for-a-solution
"In the solution file, there are a list of pseudo-XML "Project"
entries. It turns out that whatever is the first one ends up as
the Startup Project, unless it’s overridden in the suo file. Argh.
I just rearranged the order in the file and it’s good."
"just moving the pseudo-xml isn't enough. You also have to move the
group of entries in the "GlobalSection(ProjectConfigurationPlatforms)
= postSolution" group that has the GUID of the project you moved to
the top. So there are two places to move lines."
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We ran out GUIDs. Again. But there is no need to: we can generate them
semi-randomly from the target file name of the project.
Note: the Vcproj generator is probably only interesting for historical
reasons; nevertheless, the upcoming Vcxproj generator (to support modern
Visual Studio versions) is based on the Vcproj generator and it is
better to fix this here first.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The internal diff machinery can be made to read out of bounds while
looking for --funcion-context line in a corner case, which has been
corrected.
* jk/xdiff-clamp-funcname-context-index:
xdiff: clamp function context indices in post-image
We have been trying out a few language features outside c89; the
coding guidelines document did not talk about them and instead had
a blanket ban against them.
* jc/post-c89-rules-doc:
CodingGuidelines: spell out post-C89 rules
Code restructuring during 2.20 period broke fetching tags via
"import" based transports.
* fc/fetch-with-import-fix:
fetch: fix regression with transport helpers
fetch: make the code more understandable
fetch: trivial cleanup
t5801 (remote-helpers): add test to fetch tags
t5801 (remote-helpers): cleanup refspec stuff
The commit-graph file is now part of the "files that the runtime
may keep open file descriptors on, all of which would need to be
closed when done with the object store", and the file descriptor to
an existing commit-graph file now is closed before "gc" finalizes a
new instance to replace it.
* ds/close-object-store:
packfile: rename close_all_packs to close_object_store
packfile: close commit-graph in close_all_packs
commit-graph: use raw_object_store when closing
commit-graph: extract write_commit_graph_file()
commit-graph: extract copy_oids_to_commits()
commit-graph: extract count_distinct_commits()
commit-graph: extract fill_oids_from_all_packs()
commit-graph: extract fill_oids_from_commit_hex()
commit-graph: extract fill_oids_from_packs()
commit-graph: create write_commit_graph_context
commit-graph: remove Future Work section
commit-graph: collapse parameters into flags
commit-graph: return with errors during write
commit-graph: fix the_repository reference
"git checkout -p" needs to selectively apply a patch in reverse,
which did not work well.
* pw/add-p-recount:
add -p: fix checkout -p with pathological context
Code clean-up to avoid signed integer overlaps during binary search.
* rs/avoid-overflow-in-midpoint-computation:
cleanup: fix possible overflow errors in binary search, part 2
"git interpret-trailers" always treated '#' as the comment
character, regardless of core.commentChar setting, which has been
corrected.
* jk/trailers-use-config:
interpret-trailers: load default config
"git stash show 23" used to work, but no more after getting
rewritten in C; this regression has been corrected.
* tg/stash-ref-by-index-fix:
stash: fix show referencing stash index
"git rebase --abort" used to leave refs/rewritten/ when concluding
"git rebase -r", which has been corrected.
* pw/rebase-abort-clean-rewritten:
rebase --abort/--quit: cleanup refs/rewritten
sequencer: return errors from sequencer_remove_state()
rebase: warn if state directory cannot be removed
rebase: fix a memory leak
An incorrect list of options was cached after command line
completion failed (e.g. trying to complete a command that requires
a repository outside one), which has been corrected.
* nd/completion-no-cache-failure:
completion: do not cache if --git-completion-helper fails
The code to parse scaled numbers out of configuration files has
been made more robust and also easier to follow.
* rs/config-unit-parsing:
config: simplify parsing of unit factors
config: don't multiply in parse_unit_factor()
config: use unsigned_mult_overflows to check for overflows
The codepath to compute delta islands used to spew progress output
without giving the callers any way to squelch it, which has been
fixed.
* jk/delta-islands-progress-fix:
delta-islands: respect progress flag
Use "Erase in Line" CSI sequence that is already used in the editor
support to clear cruft in the progress output.
* sg/rebase-progress:
progress: use term_clear_line()
rebase: fix garbled progress display with '-x'
pager: add a helper function to clear the last line in the terminal
t3404: make the 'rebase.missingCommitsCheck=ignore' test more focused
t3404: modernize here doc style
