* jk/color-and-pager:
want_color: automatically fallback to color.ui
diff: don't load color config in plumbing
config: refactor get_colorbool function
color: delay auto-color decision until point of use
git_config_colorbool: refactor stdout_is_tty handling
diff: refactor COLOR_DIFF from a flag into an int
setup_pager: set GIT_PAGER_IN_USE
t7006: use test_config helpers
test-lib: add helper functions for config
t7006: modernize calls to unset
Conflicts:
builtin/commit.c
parse-options.c
"git branch -M <foo> <current-branch>" allows updating the current branch
which HEAD points, without the necessary house-keeping that git reset
normally does to make this operation sensible. It also leaves the reflog
in a confusing state (you would be warned when trying to read it).
"git checkout -B <current branch> <foo>" is also partly vulnerable to this
bug; due to inconsistent pre-flight checks it would perform half of its
task and then abort just before rewriting the branch. Again this
manifested itself as the index file getting out-of-sync with HEAD.
"git branch -f" already guarded against this problem, and aborts with
a fatal error.
Update "git branch -M", "git checkout -B" and "git branch -f" to share the
same check before allowing a branch to be created. These prevent you from
updating the current branch.
We considered suggesting the use of "git reset" in the failure message
but concluded that it was not possible to discern what the user was
actually trying to do.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the "do we want color" flags default to -1 to
indicate that we don't have any color configured. This value
is handled in one of two ways:
1. In porcelain, we check early on whether the value is
still -1 after reading the config, and set it to the
value of color.ui (which defaults to 0).
2. In plumbing, it stays untouched as -1, and want_color
defaults it to off.
This works fine, but means that every porcelain has to check
and reassign its color flag. Now that want_color gives us a
place to put this check in a single spot, we can do that,
simplifying the calling code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we read a color value either from a config file or from
the command line, we use git_config_colorbool to convert it
from the tristate always/never/auto into a single yes/no
boolean value.
This has some timing implications with respect to starting
a pager.
If we start (or decide not to start) the pager before
checking the colorbool, everything is fine. Either isatty(1)
will give us the right information, or we will properly
check for pager_in_use().
However, if we decide to start a pager after we have checked
the colorbool, things are not so simple. If stdout is a tty,
then we will have already decided to use color. However, the
user may also have configured color.pager not to use color
with the pager. In this case, we need to actually turn off
color. Unfortunately, the pager code has no idea which color
variables were turned on (and there are many of them
throughout the code, and they may even have been manipulated
after the colorbool selection by something like "--color" on
the command line).
This bug can be seen any time a pager is started after
config and command line options are checked. This has
affected "git diff" since 89d07f7 (diff: don't run pager if
user asked for a diff style exit code, 2007-08-12). It has
also affect the log family since 1fda91b (Fix 'git log'
early pager startup error case, 2010-08-24).
This patch splits the notion of parsing a colorbool and
actually checking the configuration. The "use_color"
variables now have an additional possible value,
GIT_COLOR_AUTO. Users of the variable should use the new
"want_color()" wrapper, which will lazily determine and
cache the auto-color decision.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually this function figures out for itself whether stdout
is a tty. However, it has an extra parameter just to allow
git-config to override the auto-detection for its
--get-colorbool option.
Instead of an extra parameter, let's just use a global
variable. This makes calling easier in the common case, and
will make refactoring the colorbool code much simpler.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the value from 'core.abbrev' configuration variable unless user
specifies the length on command line when showing commit object name
in "branch -v" output.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 03feddd (git-check-ref-format: reject funny ref names, 2005-10-13),
"git branch -d" can take more than one branch names to remove.
The documentation was correct, but the usage string was not.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/format-patch-am:
format-patch: preserve subject newlines with -k
clean up calling conventions for pretty.c functions
pretty: add pp_commit_easy function for simple callers
mailinfo: always clean up rfc822 header folding
t: test subject handling in format-patch / am pipeline
Conflicts:
builtin/branch.c
builtin/log.c
commit.h
Many callers don't actually care about the pretty print
context at all; let's just give them a simple way of
pretty-printing a commit without having to create a context
struct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a add_verbose_info function that takes care of adding
- an abbreviated object name;
- a summary of the form [ahead x, behind y] of the relationship
to the corresponding upstream branch;
- a one line commit subject
for the tip commit of a branch, for use in "git branch -v" output.
No functional change intended. This just unindents the code a little
and makes it easier to skip on first reading.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "(no branch)" message that's shown by "git branch" when
you're in a detached HEAD.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "git branch -v" messages translatable, e.g.:
5054b57 [ahead 8] branch error fixup
This is possibly a plumbing message.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "Deleted %sbranch %s (was %s).\n" messages. test in
t3200-branch.sh explicitly checked for this message. Change it to skip
under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This could be done better by splitting it up, but it would change too
much code, which I'm trying to avoid at this point. Instead add a
TRANSLATORS comment to explain what "remote " does.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/git-cmd-h-bypass-setup:
update-index -h: show usage even with corrupt index
merge -h: show usage even with corrupt index
ls-files -h: show usage even with corrupt index
gc -h: show usage even with broken configuration
commit/status -h: show usage even with broken configuration
checkout-index -h: show usage even in an invalid repository
branch -h: show usage even in an invalid repository
Conflicts:
builtin/merge.c
Add OPT__FORCE as a helper macro in the same spirit as OPT__VERBOSE
et.al. to simplify defining -f/--force options.
Signed-off-by: Rene Scharfe <rene.scharfe@lstfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows better help text to be defined than "be verbose". Also make use
of the macro in places that already had a different description. No
object code changes intended.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need for "git branch -h" to try to access a repository.
In the spirit of v1.6.6-rc0~34^2~3 (Let 'git <command> -h' show usage
without a git dir, 2009-11-09). This brings git one step closer to
passing the following (automatically verifiable) test:
Before any repository access (aside from git_config()), a
function from the setup_git_directory_* family has been run
and thus one step closer to being able to use an automatic repository
access checker.
[jn: simplified; new commit message, test]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sm/branch-broken-ref:
branch: don't fail listing branches if one of the commits wasn't found
branch: exit status now reflects if branch listing finds an error
When listing branches with ref lookups, if one of the known raw refs
doesn't point to a commit then "git branch" would return error(),
terminating the whole for_each_rawref() iteration and possibly hiding
any remaining refs.
Signed-off-by: Simo Melenius <simo.melenius@iki.fi>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If some refs could not be read when listing branches, this can now be
observed in the exit status of the "git branch" command.
Signed-off-by: Simo Melenius <simo.melenius@iki.fi>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this patch at least IBM VisualAge C 5.0 (I have 5.0.2) on AIX
5.1 fails to compile git.
enum style is inconsistent already, with some enums declared on one
line, some over 3 lines with the enum values all on the middle line,
sometimes with 1 enum value per line... and independently of that the
trailing comma is sometimes present and other times absent, often
mixing with/without trailing comma styles in a single file, and
sometimes in consecutive enum declarations.
Clearly, omitting the comma is the more portable style, and this patch
changes all enum declarations to use the portable omitted dangling
comma style consistently.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This shrinks the top-level directory a bit, and makes it much more
pleasant to use auto-completion on the thing. Instead of
[torvalds@nehalem git]$ em buil<tab>
Display all 180 possibilities? (y or n)
[torvalds@nehalem git]$ em builtin-sh
builtin-shortlog.c builtin-show-branch.c builtin-show-ref.c
builtin-shortlog.o builtin-show-branch.o builtin-show-ref.o
[torvalds@nehalem git]$ em builtin-shor<tab>
builtin-shortlog.c builtin-shortlog.o
[torvalds@nehalem git]$ em builtin-shortlog.c
you get
[torvalds@nehalem git]$ em buil<tab> [type]
builtin/ builtin.h
[torvalds@nehalem git]$ em builtin [auto-completes to]
[torvalds@nehalem git]$ em builtin/sh<tab> [type]
shortlog.c shortlog.o show-branch.c show-branch.o show-ref.c show-ref.o
[torvalds@nehalem git]$ em builtin/sho [auto-completes to]
[torvalds@nehalem git]$ em builtin/shor<tab> [type]
shortlog.c shortlog.o
[torvalds@nehalem git]$ em builtin/shortlog.c
which doesn't seem all that different, but not having that annoying
break in "Display all 180 possibilities?" is quite a relief.
NOTE! If you do this in a clean tree (no object files etc), or using an
editor that has auto-completion rules that ignores '*.o' files, you
won't see that annoying 'Display all 180 possibilities?' message - it
will just show the choices instead. I think bash has some cut-off
around 100 choices or something.
So the reason I see this is that I'm using an odd editory, and thus
don't have the rules to cut down on auto-completion. But you can
simulate that by using 'ls' instead, or something similar.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
