This may help to understand why --graph causes more comments to
be selected.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A user may want different pager settings or even a
different pager for various subcommands (e.g., because they
use different less settings for "log" vs "diff", or because
they have a pager that interprets only log output but not
other commands).
This patch extends the pager.<cmd> syntax to support not
only boolean to-page-or-not-to-page, but also to specify a
pager just for a specific command.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's pretty straightforward, but a stripped-down example
never hurts. And we should make clear that it is explicitly
OK to use SIG_DFL and SIG_IGN.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It makes little sense to have --diff-filter in the middle of them, and
even spares an ifndef::git-format-patch.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add OPT__FORCE as a helper macro in the same spirit as OPT__VERBOSE
et.al. to simplify defining -f/--force options.
Signed-off-by: Rene Scharfe <rene.scharfe@lstfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows better help text to be defined than "be quiet". Also make use
of the macro in a place that already had a different description. No
object code changes intended.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows better help text to be defined than "dry run". Also make use
of the macro in places that already had a different description. No
object code changes intended.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows better help text to be defined than "be verbose". Also make use
of the macro in places that already had a different description. No
object code changes intended.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new boolean "fetchRecurseSubmodules" config option controls the
behavior for "git fetch" and "git pull". It specifies if these commands
should recurse into submodules and fetch new commits there too and can be
set separately for each submodule.
In the .gitmodules file "submodule.<name>.fetchRecurseSubmodules" entries
are read before looking for them in .git/config. Thus settings found in
.git/config will override those from .gitmodules, thereby allowing the
user to ignore settings given by the remote side while also letting
upstream set reasonable defaults for those users who don't have special
needs.
This configuration can be overridden by the command line option
"--[no-]recurse-submodules" of "git fetch" and "git pull".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new boolean option can be used to override the default for "git
fetch" and "git pull", which is to not recurse into populated submodules
and fetch all new commits there too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now you had to call "git submodule update" (without -N|--no-fetch
option) or something like "git submodule foreach git fetch" to fetch
new commits in populated submodules from their remote.
This could lead to "(commits not present)" messages in the output of
"git diff --submodule" (which is used by "git gui" and "gitk") after
fetching or pulling new commits in the superproject and is an obstacle for
implementing recursive checkout of submodules. Also "git submodule
update" cannot fetch changes when disconnected, so it was very easy to
forget to fetch the submodule changes before disconnecting only to
discover later that they are needed.
This patch adds the "--recurse-submodules" option to recursively fetch
each populated submodule from the url configured in the .git/config of the
submodule at the end of each "git fetch" or during "git pull" in the
superproject. The submodule paths are taken from the index.
The hidden option "--submodule-prefix" is added to "git fetch" to be able
to print out the full paths of nested submodules.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an initial --in-reply-to is supplied, make it apply only to the
first message; --[no-]chain-reply-to setting are honored by second and
subsequent messages; this is also how the git-format-patch option with
the same name behaves.
Moreover, when $initial_reply_to is asked to the user interactively it
is asked as the "Message-ID to be used as In-Reply-To for the _first_
email", this makes the user think that the second and subsequent
patches are not using it but are considered as replies to the first
message or chained according to the --[no-]chain-reply setting.
Look at the v2 series in the illustration to see what the new behavior
ensures:
(before the patch) | (after the patch)
[PATCH 0/2] Here is what I did... | [PATCH 0/2] Here is what I did...
[PATCH 1/2] Clean up and tests | [PATCH 1/2] Clean up and tests
[PATCH 2/2] Implementation | [PATCH 2/2] Implementation
[PATCH v2 0/3] Here is a reroll | [PATCH v2 0/3] Here is a reroll
[PATCH v2 1/3] Clean up | [PATCH v2 1/3] Clean up
[PATCH v2 2/3] New tests | [PATCH v2 2/3] New tests
[PATCH v2 3/3] Implementation | [PATCH v2 3/3] Implementation
This is the typical behaviour we want when we send a series with cover
letter in reply to some discussion, the new patch series should appear
as a separate subtree in the discussion.
Also update the documentation on --in-reply-to to describe the new
behavior.
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A frequently asked question on #git is how to stop tracking a file
that is mistakenly tracked by git. A frequently attempted strategy is
to add such files to .gitignore.
Thus one might imagine that the gitignore documentation could be a
good entry point for 'git rm' documentation. Add some
cross-references in this vein.
While at it, move a reference to update-index --assume-unchanged from
the DESCRIPTION to lower down on the page. This way, the methodical
reader can benefit from first learning what excludes files do, then
how they relate to other git facilities.
Based-on-patch-by: Sitaram Chamarty <sitaram@atc.tcs.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A learner-by-example might want to look at the examples section first.
Help her out by supplying some section headings: PATTERN FORMAT for
the format of lines in an excludes file and EXAMPLES for the two
examples.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous text was not exactly accurate; it is OK to
change space and minus lines, but only in certain ways.
This patch takes a whole new approach, which is to describe
the sorts of conceptual operations you might want to
perform. It also includes a healthy dose of warnings about
how things can go wrong.
Since the size of the text is getting quite long, it also
splits this out into an "editing patches" section. This
makes more sense with the current structure, anyway, which
already splits out the interactive mode description.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's diff machinery has supported a -s (silence diff output) option
as far back as v0.99~900 (Silent flag for show-diff, 2005-04-13), but
the option is only advertised in an odd corner of the git diff-tree
manual.
The main use is to retrieve basic metadata about a commit:
git show -s rev
Explain this in the 'git log' manual and provide an example in the
'git show' examples section. This is kind of a cop-out, since it
would be more useful to explain it in the 'git show' manual proper,
which says:
The command takes options applicable to the git
diff-tree command to control how the changes the
commit introduces are shown.
This manual page describes only the most frequently
used options.
Fixing that is a larger task for another day.
Reported-by: Will Hall <will@gnatter.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 1.6.5 "git clone" honors the --recursive option to recursively check
out submodules too. As this option can easily be misinterpreted when it is
added to other commands like "git grep", add the new --recurse-submodules
option as an alias for --recursive so the same option can be used for all
commands recursing into submodules.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is an oversimplification to say that we can take
"[<commit> [<commit>]]", as it really depends on what
options have been given. Instead, let's list the major modes
of operation separately, as we do in other manpages.
This patch also adjusts the text immediately after the
synopsis to match the lines given in the synopsis.
For git-difftool, which has the same issue, let's refer the
user to the git-diff manpage rather than spelling it all out
again.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was the only occurence of that usage, and square brackets are
sufficient and already well-established for that purpose.
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide a few examples on argument and option notation in usage strings
and command synopses.
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since --inetd makes main return with the result of execute() before
daemonize is gets called, these two options are already incompatible.
Document it, and add an error if attempted.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option makes it convenient to construct commit messages for use
with 'rebase --autosquash'. The resulting commit message will be
"squash! ..." where "..." is the subject line of the specified commit
message. This option can be used with other commit message options
such as -m, -c, -C and -F.
If an editor is invoked (as with -c or -eF or no message options) the
commit message is seeded with the correctly formatted subject line.
Example usage:
$ git commit --squash HEAD~2
$ git commit --squash HEAD~2 -m "clever comment"
$ git commit --squash HEAD~2 -F msgfile
$ git commit --squash HEAD~2 -C deadbeef
Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option makes it convenient to construct commit messages for use
with 'rebase --autosquash'. The resulting commit message will be
"fixup! ..." where "..." is the subject line of the specified commit
message.
Example usage:
$ git commit --fixup HEAD~2
Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Fetch all tags and merge them" does not make any sense as a request at
the logical level, even though it might be more convenient to type.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the documentation is mostly consistant in the use of "remote
branch" Vs "remote-tracking branch", let's make this distinction explicit
early in the user-manual.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"remote branch" is a branch hosted in a remote repository, while
"remote-tracking branch" is a copy of such branch, hosted locally.
The distinction is subtle when the copy is up-to-date, but rather
fundamental to understand what "git fetch" and "git push" do.
This patch should fix all incorrect usages in Documentation/ directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One more step towards consistancy. We change the documentation and the C
code in a single patch, since the only instances in the C code are in
comment and usage strings.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To complement the straightforward perl application in previous patch,
this adds a few manual changes.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"remote-tracking" branch makes it explicit that the branch is "tracking a
remote", as opposed to "remote, and tracking something".
See discussion in e.g.
http://mid.gmane.org/8835ADF9-45E5-4A26-9F7F-A72ECC065BB2@gmail.com
for more details.
This patch is a straightforward application of
perl -pi -e 's/remote tracking branch/remote-tracking branch/'
except in the RelNotes directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Older Gits talked about "updating" a file to add its content to the
index, but this terminology is confusing for new users. "to stage" is far
more intuitive and already used in e.g. the "git stage" command name.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inside an element of an enumerated list, the second and subsequent
paragraphs need to lose their indent and have to be strung together with a
line with a single '+' on it instead. Otherwise the lines below are shown
in typewriter face, which just looks wrong.
Signed-off-by: Nathan W. Panike <nathan.panike@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though git makes sure that it uses enough hexdigits to show an
abbreviated object name unambiguously, as more objects are added to the
repository over time, a short name that used to be unique will stop being
unique. Git uses this many extra hexdigits that are more than necessary
to make the object name currently unique, in the hope that its output will
stay unique a bit longer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sn/doc-opt-notation:
Fix {update,checkout}-index usage strings
Put a space between `<' and argument in pack-objects usage string
Remove stray quotes in --pretty and --format documentation
Use parentheses and `...' where appropriate
Fix odd markup in --diff-filter documentation
Use angles for placeholders consistently
The previous text was not exactly accurate; it is OK to
change space and minus lines, but only in certain ways. This
patch attempts to cover explicitly what can be done at the
individual line level, and cautions the user that
conceptually larger changes (like modifying a line) require
some understanding of the patch format.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
t/t9001-send-email.sh: fix stderr redirection in 'Invalid In-Reply-To'
Clarify and extend the "git diff" format documentation
git-show-ref.txt: clarify the pattern matching
documentation: git-config minor cleanups
Update test script annotate-tests.sh to handle missing/extra authors
Move the similarity and dissimilarity index header description closer to
where those extended headers are described.
Describe and/or clarify the format used for file modes, pathnames, and
the index header.
Document that all "old" files refer to the state before applying the
*entire* output, and all "new" files refer to the state thereafter.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-show-ref really does not do what one would expect under the name
pattern matching, so describe it.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change push.default's description to add hyphens between values and
descriptions to make the manpage easier to read. The html version is
readable either way.
Change status.showUntrackedFiles to make item descriptions be
sentences and to use the same asciidoc format as push.default. The
only visual change is the additions of "."
Signed-off-by: Cliff Frey <cliff@meraki.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new option -e (or --show-email) to git-blame that will display
the author's email instead of name on each line. This option works
for both git-blame and git-annotate.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Better advice on using topic branches for kernel development
Documentation: update implicit "--no-index" behavior in "git diff"
Documentation: expand 'git diff' SEE ALSO section
Documentation: diff can compare blobs
Documentation: gitrevisions is in section 7
shell portability: no "export VAR=VAL"
CodingGuidelines: reword parameter expansion section
Documentation: update-index: -z applies also to --index-info
Documentation: No argument of ALLOC_GROW should have side-effects
Linus Torvalds wrote:
> The real problem is that maintainers often pick random - and not at
> all stable - points for their development to begin with. They just
> pick some random "this is where Linus -git tree is today", and do
> their development on top of that. THAT is the problem - they are
> unaware that there's some nasty bug in that version.
Maybe they do this because they read it in the Git user-manual.
Fix the manual to give them better guidance.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally "--no-index" mode triggered for untracked files within the
tracked tree, but with v1.5.6-rc1~41 (Merge branch 'jc/diff-no-no-index,
2008-05-26) the command was fixed to only implicitly trigger when paths
outside the tracked tree are mentioned.
Reported-by: Yann Dirson <dirson@bertin.fr>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Point in many directions in the hope of helping the reader find what
is needed more quickly.
This commit also removes the summary attached to the SEE ALSO entry
for difftool, to avoid making the SEE ALSO list too verbose. If the
reader wants a summary of the commands referred to, she can always
look to the top of the named pages or to the table of contents on the
main git(1) page.
Suggested-by: Goswin von Brederlow <goswin-v-b@web.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Meanwhile, there is no plumbing command to compare two blobs.
Strange.
Reported-by: Yann Dirson <dirson@bertin.fr>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix references to gitrevisions(1) in the manual pages and HTML
documentation.
In practice, this will not matter much unless someone tries to use a
hard copy of the git reference manual.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This remote helper invokes external command and passes raw smart transport
stream through it. This is useful for instance for invoking ssh with
one-off odd options, connecting to git services in unix domain
sockets, in abstract namespace, using TLS or other secure protocols,
etc...
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This remote helper reflects raw smart remote transport stream back to the
calling program. This is useful for example if some UI wants to handle
ssh itself and not use hacks via GIT_SSH.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
v1.7.3-rc0~75^2 (Teach fast-import to import subtrees named by tree id,
2010-06-30) has a shortcoming - it doesn't allow the root to be set.
Extend this behaviour by allowing the root to be referenced as the
empty path, "".
For a command (like filter-branch --subdirectory-filter) that wants
to commit a lot of trees that already exist in the object db, writing
undeltified objects as loose files only to repack them later can
involve a significant amount of overhead.
(23% slow-down observed on Linux 2.6.35, worse on Mac OS X 10.6)
Fortunately we have fast-import (which is one of the only git commands
that will write to a pack directly) but there is not an advertised way
to tell fast-import to commit a given tree without unpacking it.
This patch changes that, by allowing
M 040000 <tree id> ""
as a filemodify line in a commit to reset to a particular tree without
any need to parse it. For example,
M 040000 4b825dc642 ""
is a synonym for the deleteall command and the fast-import equivalent of
git read-tree 4b825dc642
Signed-off-by: David Barr <david.barr@cordelta.com>
Commit-message-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Tested-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Group entries related to parameter substitutions together and avoid
using the word "regexp" to refer to the ${parameter/pattern/string}
substitution (banned), as the pattern there is a shell glob and not
a regular expression.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Quotes (for emphasis) are used in option explanations, not the
headings.
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove some stray usage of other bracket types and asterisks for the
same purpose.
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using the regex-like bracket expression, use grouping to make
it more consistent with other similar places. The brackets now have the
same meaning as in other documentation (i.e., the argument is optional).
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Mentored-and-Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the meanings of the tags "Reported-by:", "Acked-by:",
"Reviewed-by:" and "Tested-by:" clearly. Also mention that the user is
free to use any custom tags.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Liked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/repack-reuse-object:
Documentation: pack.compression: explain how to recompress
repack: add -F flag to let user choose between --no-reuse-delta/object
* mg/reset-doc:
git-reset.txt: make modes description more consistent
git-reset.txt: point to git-checkout
git-reset.txt: use "working tree" consistently
git-reset.txt: reset --soft is not a no-op
git-reset.txt: reset does not change files in target
git-reset.txt: clarify branch vs. branch head
* maint:
Documentation/git-clone: describe --mirror more verbosely
do not depend on signed integer overflow
work around buggy S_ISxxx(m) implementations
xdiff: cast arguments for ctype functions to unsigned char
init: plug tiny one-time memory leak
diffcore-pickaxe.c: remove unnecessary curly braces
t3020 (ls-files-error-unmatch): remove stray '1' from end of file
setup: make sure git dir path is in a permanent buffer
environment.c: remove unused variable
git-svn: fix processing of decorated commit hashes
git-svn: check_cherry_pick should exclude commits already in our history
Documentation/git-svn: discourage "noMetadata"
Some people in #linux-rt noticed that describing what "--mirror" option does
with "it mirrors" is way insufficient.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Darren 'Some People' Hart <darren@dvhart.com>
Cc: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Fix typo in pack-objects' usage
Make sure that git_getpass() never returns NULL
t0004 (unwritable files): simplify error handling
rev-list-options: clarify --parents and --children
Make it clearer that --parents resp. --children list the parent resp.
child commits next to each commit, so that I understand next time.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/pickaxe-grep:
diff/log -G<pattern>: tests
git log/diff: add -G<regexp> that greps in the patch text
diff: pass the entire diff-options to diffcore_pickaxe()
gitdiffcore doc: update pickaxe description
* rr/fmt-merge-msg:
t6200-fmt-merge-msg: Exercise '--log' to configure shortlog length
t6200-fmt-merge-msg: Exercise 'merge.log' to configure shortlog length
merge: Make 'merge.log' an integer or boolean option
merge: Make '--log' an integer option for number of shortlog entries
fmt_merge_msg: Change fmt_merge_msg API to accept shortlog_len
Conflicts:
builtin/merge.c
Change the anchor name to
Finding-commits-With-given-Content
so that it corresponds to the actual content there.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we use a-b-c for mywork commits in one place, I think it would be
logical to also use a-b-c too in other illustration on this topic.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new long-form options --detect-renames[=<n>], --detect-copies[=<n>],
and --break-rewrites[=[<n>][/<m>]] as synonyms for the -M, -C, and -B
options (respectively).
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recursive merge strategy turns on rename detection but leaves the
rename threshold at the default. Add a strategy option to allow the user
to specify a rename threshold to use.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the host has more than one interfaces, daemon can listen to all
of them by not giving any --listen option, or listen to only one.
Teach it to accept more than one --listen options.
Remove the hostname information form the die, if no socket could be
created. It would only trigger when no interface out of either all
interface or the ones specified on the command line with --listen
options, can be listened to and so the user does know which "host" was
asked.
Signed-off-by: Alexander Sulfrian <alexander@sulfrian.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a small remark about how to recompress all existing objects after
changing the compression level for pack files.
Signed-off-by: Jan Krüger <jk@jk.gs>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 479b56ba ('make "repack -f" imply "pack-objects --no-reuse-object"'),
git repack -f was changed to include recompressing all objects on the
zlib level on the assumption that if the user wants to spend that much
time already, some more time won't hurt (and recompressing is useful if
the user changed the zlib compression level).
However, "some more time" can be quite long with very big repositories,
so some users are going to appreciate being able to choose. If we are
going to give them the choice, --no-reuse-object will probably be
interesting a lot less frequently than --no-reuse-delta. Hence, this
reverts -f to the old behaviour (--no-reuse-delta) and adds a new -F
option that replaces the current -f.
Measurements taken using this patch on a current clone of git.git
indicate a 17% decrease in time being made available to users:
git repack -Adf 34.84s user 0.56s system 145% cpu 24.388 total
git repack -AdF 38.79s user 0.56s system 133% cpu 29.394 total
Signed-off-by: Jan Krüger <jk@jk.gs>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the ability to use a command line --to-cmd=cmd
to create the list of "To:" addresses.
Used a shared routine for --cc-cmd and --to-cmd.
Did not use IPC::Open2, leaving that for Ævar if
ever he decides to fix the other bugs he might find.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the help for git filter-branch refers users of --env-filter
to git-commit for information about environment variables affecting
commits. However, this information is not contained in the git-commit
help, but is very explicitly detailed in git-commit-tree.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation in revisions.txt did not match the implementation, and
the comment in sha1_name.c was incomplete.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX wants shells to support both "N" and "$N" and requires them to yield
the same answer to $((N)) and $(($N)), but we should aim for portability
in a case like this, especially when the price we pay to do so is so
small, i.e. a few extra dollars.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"noMetadata" is a sometimes harmful option, so better document
its behavior and limitations.
Suggested-by: Vadim Zeitlin
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Currently, the structure of the individual mode entries is different
which makes it difficult to grasp the differences between the modes.
Also, the same items are named differently (e.g. <commit>, "the named
commit", "the given commit", "the commit being switched to").
Structure and word all mode entries consistently.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
for the case of updating a file in index and worktree, or from the index
to the worktree.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clearer that git reset --soft actually does something (changing
HEAD). While it is mentioned in the previous paragraph already it can
be easily overlooked otherwise.
Also, git reset --soft does not look at the index nor the worktree, so
there is no "good order" requirement.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-reset obviously cannot change files in an existing commit. Make it
not sound as if it could: reset can change HEAD and, in that sense, can
change which state a file in HEAD is in.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Change the branch" can be misunderstood to mean "change which branch is
checked out". Make it clearer that git-reset changes the branch head of
the currently checked out branch.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to descriptions of other options, state what -x does in imperative
mood. Start sentences for -X and --exclude-per-directory options in
capital letters.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b5227d8, -x/--exclude does not apply to cached files.
This is easy to miss unless you read the discussion in the
EXCLUDE PATTERNS section. Clarify that the option applies
to untracked files and direct the reader to EXCLUDE PATTERNS.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds fortran xfuncname and wordRegex patterns to the list of builtin
patterns. The intention is for the patterns to be appropriate for all
versions of fortran including 77, 90, 95. The patterns can be enabled by
adding the diff=fortran attribute to the .gitattributes file for the
desired file glob.
This also adds a new macro named IPATTERN which is just like the PATTERNS
macro except it sets the REG_ICASE flag so that case will be ignored.
The test code in t4018 and the docs were updated as appropriate.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git-config(1), diff.noprefix was placed in between
diff.mnemonicprefix and the list of mnemonic prefixes, which is
obviously incorrect and very confusing to readers. Now, it is located
after the end of the explanation of mnemonicprefix, which makes much
more sense.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, read-tree can be run without tree-ish arguments, in which
case it will empty the index. Since this behavior is undocumented and
perhaps a bit too invasive to be the "default" action for read-tree,
deprecate it in favor of a new --empty option that does the same thing.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make 'merge.log' an integer or boolean option to set the number of
shortlog entries to display in the merge commit. Note that it defaults
to false, and that true means a default value of 20. Also update
corresponding documentation.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the command-line '--log' option from a boolean option to an
integer option, and parse the optional integer provided on the
command-line into the 'shortlog_len' variable. Also update the
documentation accordingly.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reported-by: Yaroslav Halchenko <debian@onerussian.com>
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kf/askpass-config:
Extend documentation of core.askpass and GIT_ASKPASS.
Allow core.askpass to override SSH_ASKPASS.
Add a new option 'core.askpass'.
There are 108 of them already. That's a bit more than one third of
all the files in the Documentation directory already, and still growing.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new command line parameter --smtp-server-option or default
configuration sendemail.smtpserveroption can be used to pass
specific options to the SMTP server. Update the documentation
accordingly.
Signed-off-by: Pascal Obry <pascal@obry.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/submodule-ignore-diff:
checkout: Use submodule.*.ignore settings from .git/config and .gitmodules
checkout: Add test for diff.ignoreSubmodules
checkout: respect diff.ignoreSubmodules setting
Conflicts:
builtin/checkout.c
* jn/merge-renormalize:
merge-recursive --renormalize
rerere: never renormalize
rerere: migrate to parse-options API
t4200 (rerere): modernize style
ll-merge: let caller decide whether to renormalize
ll-merge: make flag easier to populate
Documentation/technical: document ll_merge
merge-trees: let caller decide whether to renormalize
merge-trees: push choice to renormalize away from low level
t6038 (merge.renormalize): check that it can be turned off
t6038 (merge.renormalize): try checkout -m and cherry-pick
t6038 (merge.renormalize): style nitpicks
Don't expand CRLFs when normalizing text during merge
Try normalizing files to avoid delete/modify conflicts when merging
Avoid conflicts when merging branches with mixed normalization
Conflicts:
builtin/rerere.c
t/t4200-rerere.sh
Allow gitattributes to be set globally and system wide. This way, settings
for particular file types can be set in one place and apply for all user's
repositories.
The location of system-wide attributes file is $(prefix)/etc/gitattributes.
The location of the global file can be configured by setting
core.attributesfile.
Some parts of the code were copied from the implementation of the same
functionality in config.c.
Signed-off-by: Petr Onderka <gsvick@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The timestamp that follows "Last updated " is formatted differently
depending on the version of AsciiDoc. Looking at 4604fe56 on "html"
branch, you can see that AsciiDoc 7.0.2 used to give "02-Jul-2008 03:02:14
UTC" but AsciiDoc 8.2.5 gave "2008-09-19 06:33:25 UTC". We haven't been
correctly filtering out phantom changes that result from only the build
date for some time now, it seems.
Just filter lines that begin with "Last updated ".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/cherry-revert-message-clean-up:
tests: fix syntax error in "Use advise() for hints" test
cherry-pick/revert: Use advise() for hints
cherry-pick/revert: Use error() for failure message
Introduce advise() to print hints
Eliminate “Finished cherry-pick/revert” message
t3508: add check_head_differs_from() helper function and use it
revert: improve success message by adding abbreviated commit sha1
revert: don't print "Finished one cherry-pick." if commit failed
revert: refactor commit code into a new run_git_commit() function
revert: report success when using option --strategy
Teach "-G<regexp>" that is similar to "-S<regexp> --pickaxe-regexp" to the
"git diff" family of commands. This limits the diff queue to filepairs
whose patch text actually has an added or a deleted line that matches the
given regexp. Unlike "-S<regexp>", changing other parts of the line that
has a substring that matches the given regexp IS counted as a change, as
such a change would appear as one deletion followed by one addition in a
patch text.
Unlike -S (pickaxe) that is intended to be used to quickly detect a commit
that changes the number of occurrences of hits between the preimage and
the postimage to serve as a part of larger toolchain, this is meant to be
used as the top-level Porcelain feature.
The implementation unfortunately has to run "diff" twice if you are
running "log" family of commands to produce patches in the final output
(e.g. "git log -p" or "git format-patch"). I think we _could_ cache the
result in-core if we wanted to, but that would require larger surgery to
the diffcore machinery (i.e. adding an extra pointer in the filepair
structure to keep a pointer to a strbuf around, stuff the textual diff to
the strbuf inside diffgrep_consume(), and make use of it in later stages
when it is available) and it may not be worth it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old text described the original design (one side does not have it at
all while the other side has it); this was later amended to check if the
number of occurrences changed, which is what we currently do with -S.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Setting this option has the same effect as setting the environment variable
'GIT_ASKPASS'.
Signed-off-by: Knut Franke <k.franke@science-computing.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at it, document that checkout uses this flag too in the Documentation.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the topmost three commits in a branch were merge commits, 'git
format-patch -3' used to output nothing. Since Git can't prepare
patches out of merge commits anyway, don't go over them in the first
place. 'git format-patch -3' now prepares three patches from the
topmost three commits without counting merge commits. Also add a
corresponding test in t4014-format-patch and update documentation.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can be clever and know by ourselves when we need the behavior
implied by "--remap-to-ancestor". No need to encumber users by having
them exposed to it as a tunable. (Option kept for backward compatibility,
but it's now a no-op.)
Signed-off-by: Csaba Henk <csaba@gluster.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
