* sp/maint-push-sideband:
receive-pack: Send hook output over side band #2
receive-pack: Wrap status reports inside side-band-64k
receive-pack: Refactor how capabilities are shown to the client
send-pack: demultiplex a sideband stream with status data
run-command: support custom fd-set in async
run-command: Allow stderr to be a caller supplied pipe
Update git fsck --full short description to mention packs
Conflicts:
run-command.c
This patch adds the possibility to supply a set of non-0 file
descriptors for async process communication instead of the
default-created pipe.
Additionally, we now support bi-directional communiction with the
async procedure, by giving the async function both read and write
file descriptors.
To retain compatiblity and similar "API feel" with start_command,
we require start_async callers to set .out = -1 to get a readable
file descriptor. If either of .in or .out is 0, we supply no file
descriptor to the async process.
[sp: Note: Erik started this patch, and a huge bulk of it is
his work. All bugs were introduced later by Shawn.]
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "info/refs" is a static file and not behind a CGI handler, some
servers may not handle a GET request for it with a query string
appended (eg. "?foo=bar") properly.
If such a request fails, retry it sans the query string. In addition,
ensure that the "smart" http protocol is not used (a service has to be
specified with "?service=<service name>" to be conformant).
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Reported-and-tested-by: Yaroslav Halchenko <debian@onerussian.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/symbol-static:
date.c: mark file-local function static
Replace parse_blob() with an explanatory comment
symlinks.c: remove unused functions
object.c: remove unused functions
strbuf.c: remove unused function
sha1_file.c: remove unused function
mailmap.c: remove unused function
utf8.c: mark file-local function static
submodule.c: mark file-local function static
quote.c: mark file-local function static
remote-curl.c: mark file-local function static
read-cache.c: mark file-local functions static
parse-options.c: mark file-local function static
entry.c: mark file-local function static
http.c: mark file-local functions static
pretty.c: mark file-local function static
builtin-rev-list.c: mark file-local function static
bisect.c: mark file-local function static
* maint:
remote-curl: Fix Accept header for smart HTTP connections
grep: -L should show empty files
rebase--interactive: Ignore comments and blank lines in peek_next_command
We actually expect to see an application/x-git-upload-pack-result
but we lied and said we Accept *-response. This was a typo on my
part when I was writing the code.
Fortunately the wrong Accept header had no real impact, as the
deployed git-http-backend servers were not testing the Accept
header before they returned their content.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using multi-pass authentication methods, the curl library may need
to rewind the read buffers used for providing data to HTTP POST, if data
has been output before a 401 error is received.
This is needed only when the first request (when the multi-pass
authentication method isn't initialized and hasn't received its challenge
yet) for a certain curl session is a chunked HTTP POST.
As long as the current rpc read buffer is the first one, we're able to
rewind without need for additional buffering.
The curl library currently starts sending data without waiting for a
response to the Expect: 100-continue header, due to a bug in curl that
exists up to curl version 7.19.7.
If the HTTP server doesn't handle Expect: 100-continue headers properly
(e.g. Lighttpd), the library has to start sending data without knowing
if the request will be successfully authenticated. In this case, this
rewinding solution is not sufficient - the whole request will be sent
before the 401 error is received.
Signed-off-by: Martin Storsjo <martin@martin.st>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the extraneous semicolon (';') at the end of the if statement
that allowed the code in its block to execute regardless of the
condition.
This fixes pushing to a smart http backend with chunked encoding.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This works around a bug in curl versions up to 7.19.4, where disabling the
CURLOPT_NOBODY option sets the internal state incorrectly considering that
CURLOPT_PUT was enabled earlier.
The bug is discussed at http://curl.haxx.se/bug/view.cgi?id=2727981 and is
corrected in the latest version of curl in CVS.
This bug usually has no impact on git, but may surface if using multi-pass
authentication methods.
Signed-off-by: Martin Storsjo <martin@martin.st>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/smart-http: (37 commits)
http-backend: Let gcc check the format of more printf-type functions.
http-backend: Fix access beyond end of string.
http-backend: Fix bad treatment of uintmax_t in Content-Length
t5551-http-fetch: Work around broken Accept header in libcurl
t5551-http-fetch: Work around some libcurl versions
http-backend: Protect GIT_PROJECT_ROOT from /../ requests
Git-aware CGI to provide dumb HTTP transport
http-backend: Test configuration options
http-backend: Use http.getanyfile to disable dumb HTTP serving
test smart http fetch and push
http tests: use /dumb/ URL prefix
set httpd port before sourcing lib-httpd
t5540-http-push: remove redundant fetches
Smart HTTP fetch: gzip requests
Smart fetch over HTTP: client side
Smart push over HTTP: client side
Discover refs via smart HTTP server when available
http-backend: more explict LocationMatch
http-backend: add example for gitweb on same URL
http-backend: use mod_alias instead of mod_rewrite
...
Conflicts:
.gitignore
remote-curl.c
The upload-pack requests are mostly plain text and they compress
rather well. Deflating them with Content-Encoding: gzip can easily
drop the size of the request by 50%, reducing the amount of data
to transfer as we negotiate the common commits.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-remote-curl backend detects if the remote server supports
the git-upload-pack service, and if so, runs git-fetch-pack locally
in a pipe to generate the want/have commands.
The advertisements from the server that were obtained during the
discovery are passed into git-fetch-pack before the POST request
starts, permitting server capability discovery and enablement.
Common objects that are discovered are appended onto the request as
have lines and are sent again on the next request. This allows the
remote side to reinitialize its in-memory list of common objects
during the next request.
Because all requests are relatively short, below git-remote-curl's
1 MiB buffer limit, requests will use the standard Content-Length
header and be valid HTTP/1.0 POST requests. This makes the fetch
client more tolerant of proxy servers which don't support HTTP/1.1
or the chunked transfer encoding.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-remote-curl backend detects if the remote server supports
the git-receive-pack service, and if so, runs git-send-pack in a
pipe to dump the command and pack data as a single POST request.
The advertisements from the server that were obtained during the
discovery are passed into git-send-pack before the POST request
starts. This permits git-send-pack to operate largely unmodified.
For smaller packs (those under 1 MiB) a HTTP/1.0 POST with a
Content-Length is used, permitting interaction with any server.
The 1 MiB limit is arbitrary, but is sufficent to fit most deltas
created by human authors against text sources with the occasional
small binary file (e.g. few KiB icon image). The configuration
option http.postBuffer can be used to increase (or shink) this
buffer if the default is not sufficient.
For larger packs which cannot be spooled entirely into the helper's
memory space (due to http.postBuffer being too small), the POST
request requires HTTP/1.1 and sets "Transfer-Encoding: chunked".
This permits the client to upload an unknown amount of data in one
HTTP transaction without needing to pregenerate the entire pack
file locally.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of loading the cached info/refs, try to use the smart HTTP
version when the server supports it. Since the smart variant is
actually the pkt-line stream from the start of either upload-pack
or receive-pack we need to parse these through get_remote_heads,
which requires a background thread to feed its pipe.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's okay to use the curl helper without a local repository, so long
as you don't use "fetch". There aren't any git programs that would try
to use it, and it doesn't make sense to try it (since there's nowhere
to write the results), but we may as well be clear.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The remote helper interface now supports the push capability,
which can be used to ask the implementation to push one or more
specs to the remote repository. For remote-curl we implement this
by calling the existing WebDAV based git-http-push executable.
Internally the helper interface uses the push_refs transport hook
so that the complexity of the refspec parsing and matching can be
reused between remote implementations. When possible however the
helper protocol uses source ref name rather than the source SHA-1,
thereby allowing the helper to access this name if it is useful.
>From Clemens Buchacher <drizzd@aon.at>:
update http tests according to remote-curl capabilities
o Pushing packed refs is now fixed.
o The transport helper fails if refs are already up-to-date. Add
a test for that.
o The transport helper will notice if refs are already
up-to-date. We therefore need to update server info in the
unpacked-refs test.
o The transport helper will purge deleted branches automatically.
o Use a variable ($ORIG_HEAD) instead of full SHA-1 name.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
CC: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some transports, like the native pack transport implemented by
fetch-pack, support useful features like depth or include tags.
These should be exposed if the underlying helper knows how to
use them.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some network protocols (e.g. native git://) are able to fetch more
than one ref at a time and reduce the overall transfer cost by
combining the requests into a single exchange. Instead of feeding
each fetch request one at a time to the helper, feed all of them
at once so the helper can decide whether or not it should batch them.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will need the walker, url and remote in other functions as the
code grows larger to support smart HTTP. Extract this out into a
set of globals we can easily reference once configured.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we use -b <branch>, we may checkout something else than what the
remote's HEAD references, but we still used remote_head to supply the
new ref value to the post-checkout hook, which is wrong.
So instead of using remote_head to find the value to be passed to the
post-checkout hook, we have to use our_head_points_at, which is always
correctly setup, even if -b is not used.
This also fixes a segfault when "clone -b <branch>" is used with a
remote repo that doesn't have a valid HEAD, as in such a case
remote_head is NULL, but we still tried to access it.
Reported-by: Devin Cofer <ranguvar@archlinux.us>
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All programs, in particular also the stand-alone programs (non-builtins)
must call git_extract_argv0_path(argv[0]) in order to help builds that
derive the installation prefix at runtime, such as the MinGW build.
Without this call, the program segfaults (or raises an assertion
failure).
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Tested-by: Michael Wookey <michaelwookey@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the transport native helper mechanism to fetch by http (and ftp, etc).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
