* cb/maint-quiet-push:
receive-pack: do not overstep command line argument array
propagate --quiet to send-pack/receive-pack
Conflicts:
Documentation/git-receive-pack.txt
Documentation/git-send-pack.txt
The first paragraph about flag order is no longer true and is
mentioned in git-checkout-index.txt. The rest is also mentioned in
git-checkout-index.txt.
Remove it and keep uptodate document in one place.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/ls-tree-error:
Ensure git ls-tree exits with a non-zero exit code if read_tree_recursive fails.
Add a test to check that git ls-tree sets non-zero exit code on error.
* jc/zlib-wrap:
zlib: allow feeding more than 4GB in one go
zlib: zlib can only process 4GB at a time
zlib: wrap deflateBound() too
zlib: wrap deflate side of the API
zlib: wrap inflateInit2 used to accept only for gzip format
zlib: wrap remaining calls to direct inflate/inflateEnd
zlib wrapper: refactor error message formatter
* js/ls-tree-error:
Ensure git ls-tree exits with a non-zero exit code if read_tree_recursive fails.
Add a test to check that git ls-tree sets non-zero exit code on error.
Many pathnames in a fast-import stream need to be quoted. In
particular:
1. Pathnames at the end of an "M" or "D" line need quoting
if they contain a LF or start with double-quote.
2. Pathnames on a "C" or "R" line need quoting as above,
but also if they contain spaces.
For (1), we weren't quoting at all. For (2), we put
double-quotes around the paths to handle spaces, but ignored
the possibility that they would need further quoting.
This patch checks whether each pathname needs c-style
quoting, and uses it. This is slightly overkill for (1),
which doesn't actually need to quote many characters that
vanilla c-style quoting does. However, it shouldn't hurt, as
any implementation needs to be ready to handle quoted
strings anyway.
In addition to adding a test, we have to tweak a test which
blindly assumed that case (2) would always use
double-quotes, whether it needed to or not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to do partial commits, git-commit overlays a tree on the
cache and checks pathspecs against the result. Currently, the
overlaying is done using "prefix" which prevents relative pathspecs
with ".." and absolute pathspec from matching when they refer to
files not under "prefix" and absent from the index, but still in
the tree (i.e. files staged for removal).
The point of providing a prefix at all is performance optimization.
If we say there is no common prefix for the files of interest, then
we have to read the entire tree into the index.
But even if we cannot use the working directory as a prefix, we can
still figure out if there is a common prefix for all given paths,
and use that instead. The pathspec_prefix() routine from ls-files.c
does exactly that.
Any use of global variables is removed from pathspec_prefix() so
that it can be called from commit.c.
Reported-by: Reuben Thomas <rrt@sc3d.org>
Analyzed-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Take long option names for -A (--after-context), -B (--before-context)
and -C (--context) from GNU grep and add a similar long option name
for -W (--function-context).
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new option, -W, to show the whole surrounding function of a match.
It uses the same regular expressions as -p and diff to find the beginning
of sections.
Currently it will not display comments in front of a function, but those
that are following one. Despite this shortcoming it is already useful,
e.g. to simply see a more complete applicable context or to extract whole
functions.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/clone-detached:
clone: always fetch remote HEAD
make copy_ref globally available
consider only branches in guess_remote_head
t: add tests for cloning remotes with detached HEAD
* sr/transport-helper-fix: (21 commits)
transport-helper: die early on encountering deleted refs
transport-helper: implement marks location as capability
transport-helper: Use capname for refspec capability too
transport-helper: change import semantics
transport-helper: update ref status after push with export
transport-helper: use the new done feature where possible
transport-helper: check status code of finish_command
transport-helper: factor out push_update_refs_status
fast-export: support done feature
fast-import: introduce 'done' command
git-remote-testgit: fix error handling
git-remote-testgit: only push for non-local repositories
remote-curl: accept empty line as terminator
remote-helpers: export GIT_DIR variable to helpers
git_remote_helpers: push all refs during a non-local export
transport-helper: don't feed bogus refs to export push
git-remote-testgit: import non-HEAD refs
t5800: document some non-functional parts of remote helpers
t5800: use skip_all instead of prereq
t5800: factor out some ref tests
...
The reflog manpage says:
git reflog [show] [log-options] [<ref>]
the subcommand 'show' is the default "in the absence of any
subcommands". Currently this is only true if the user provided either
at least one option or no additional argument at all. For example:
git reflog master
won't work. Change this by actually calling cmd_log_reflog in
absence of any subcommand.
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, git push --quiet produces some non-error output, e.g.:
$ git push --quiet
Unpacking objects: 100% (3/3), done.
Add the --quiet option to send-pack/receive-pack and pass it to
unpack-objects in the receive-pack codepath and to receive-pack in
the push codepath.
This fixes a bug reported for the fedora git package:
https://bugzilla.redhat.com/show_bug.cgi?id=725593
Reported-by: Jesse Keating <jkeating@redhat.com>
Cc: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of a corrupt repository, git ls-tree may report an error but
presently it exits with a code of 0.
This change uses the return code of read_tree_recursive instead.
Improved-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/tag-contains-ab:
Revert clock-skew based attempt to optimize tag --contains traversal
git skew: a tool to find how big a clock skew exists in the history
default core.clockskew variable to one day
limit "contains" traversals based on commit timestamp
tag: speed up --contains calculation
The reset command creates its reflog entry from argv.
However, it does so after having run parse_options, which
means the only thing left in argv is any non-option
arguments. Thus you would end up with confusing reflog
entries like:
$ git reset --hard HEAD^
$ git reset --soft HEAD@{1}
$ git log -2 -g --oneline
8e46cad HEAD@{0}: HEAD@{1}: updating HEAD
1eb9486 HEAD@{1}: HEAD^: updating HEAD
However, we must also consider that some scripts may set
GIT_REFLOG_ACTION before calling reset, and we need to show
their reflog action (with our text appended). For example:
rebase -i (squash): updating HEAD
On top of that, we also set the ORIG_HEAD reflog action
(even though it doesn't generally exist). In that case, the
reset argument is somewhat meaningless, as it has nothing to
do with what's in ORIG_HEAD.
This patch changes the reset reflog code to show:
$GIT_REFLOG_ACTION: updating {HEAD,ORIG_HEAD}
as before, but only if GIT_REFLOG_ACTION is set. Otherwise,
show:
reset: moving to $rev
for HEAD, and:
reset: updating ORIG_HEAD
for ORIG_HEAD (this is still somewhat superfluous, since we
are in the ORIG_HEAD reflog, obviously, but at least we now
mention which command was used to update it).
While we're at it, we can clean up the code a bit:
- Use strbufs to make the message.
- Use the "rev" parameter instead of showing all options.
This makes more sense, since it is the only thing
impacting the writing of the ref.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If fast-export is being used to generate a fast-import stream that
will be used afterwards it is desirable to indicate the end of the
stream with the new 'done' command.
Add a flag that causes fast-export to end with 'done'.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/index-pack:
verify-pack: use index-pack --verify
index-pack: show histogram when emulating "verify-pack -v"
index-pack: start learning to emulate "verify-pack -v"
index-pack: a miniscule refactor
index-pack --verify: read anomalous offsets from v2 idx file
write_idx_file: need_large_offset() helper function
index-pack: --verify
write_idx_file: introduce a struct to hold idx customization options
index-pack: group the delta-base array entries also by type
Conflicts:
builtin/verify-pack.c
cache.h
sha1_file.c
* jk/clone-cmdline-config:
clone: accept config options on the command line
config: make git_config_parse_parameter a public function
remote: use new OPT_STRING_LIST
parse-options: add OPT_STRING_LIST helper
* jc/zlib-wrap:
zlib: allow feeding more than 4GB in one go
zlib: zlib can only process 4GB at a time
zlib: wrap deflateBound() too
zlib: wrap deflate side of the API
zlib: wrap inflateInit2 used to accept only for gzip format
zlib: wrap remaining calls to direct inflate/inflateEnd
zlib wrapper: refactor error message formatter
Conflicts:
sha1_file.c
Because "diff --cached HEAD" showed an incorrect blob object name on the
LHS of the diff, we ended up updating the index entry with bogus value,
not what we read from the tree.
Noticed by John Nowak.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This optimizes the "recency order" (see pack-heuristics.txt in
Documentation/technical/ directory) used to order objects within a
packfile in three ways:
- Commits at the tip of tags are written together, in the hope that
revision traversal done in incremental fetch (which starts by
putting them in a revision queue marked as UNINTERESTING) will see a
better locality of these objects;
- In the original recency order, trees and blobs are intermixed. Write
trees together before blobs, in the hope that this will improve
locality when running pathspec-limited revision traversal, i.e.
"git log paths...";
- When writing blob objects out, write the whole family of blobs that use
the same delta base object together, by starting from the root of the
delta chain, and writing its immediate children in a width-first
manner, in the hope that this will again improve locality when reading
blobs that belong to the same path, which are likely to be deltified
against each other.
I tried various workloads in the Linux kernel repositories (HEAD at
v3.0-rc6-71-g4dd1b49) packed with v1.7.6 and with this patch, counting how
large seeks are needed between adjacent accesses to objects in the pack,
and the result looks promising. The history has 2072052 objects, weighing
some 490MiB.
* Simple commit-only log.
$ git log >/dev/null
There are 254656 commits in total.
v1.7.6 with patch
Total number of access : 258,031 258,032
0.0% percentile : 12 12
10.0% percentile : 259 259
20.0% percentile : 294 294
30.0% percentile : 326 326
40.0% percentile : 363 363
50.0% percentile : 415 415
60.0% percentile : 513 513
70.0% percentile : 857 858
80.0% percentile : 10,434 10,441
90.0% percentile : 91,985 91,996
95.0% percentile : 260,852 260,885
99.0% percentile : 1,150,680 1,152,811
99.9% percentile : 3,148,435 3,148,435
Less than 2MiB seek: 99.70% 99.69%
95% of the pack accesses look at data that is no further than 260kB
from the previous location we accessed. The patch does not change the
order of commit objects very much, and the result is very similar.
* Pathspec-limited log.
$ git log drivers/net >/dev/null
The path is touched by 26551 commits and merges (among 254656 total).
v1.7.6 with patch
Total number of access : 559,511 558,663
0.0% percentile : 0 0
10.0% percentile : 182 167
20.0% percentile : 259 233
30.0% percentile : 357 304
40.0% percentile : 714 485
50.0% percentile : 5,046 3,976
60.0% percentile : 688,671 443,578
70.0% percentile : 319,574,732 110,370,100
80.0% percentile : 361,647,599 123,707,229
90.0% percentile : 393,195,669 128,947,636
95.0% percentile : 405,496,875 131,609,321
99.0% percentile : 412,942,470 133,078,115
99.5% percentile : 413,172,266 133,163,349
99.9% percentile : 413,354,356 133,240,445
Less than 2MiB seek: 61.71% 62.87%
With the current pack heuristics, more than 30% of accesses have to
seek further than 300MB; the updated pack heuristics ensures that less
than 0.1% of accesses have to seek further than 135MB. This is largely
due to the fact that the updated heuristics does not mix blobs and
trees together.
* Blame.
$ git blame drivers/net/ne.c >/dev/null
The path is touched by 34 commits and merges.
v1.7.6 with patch
Total number of access : 178,147 178,166
0.0% percentile : 0 0
10.0% percentile : 142 139
20.0% percentile : 222 194
30.0% percentile : 373 300
40.0% percentile : 1,168 837
50.0% percentile : 11,248 7,334
60.0% percentile : 305,121,284 106,850,130
70.0% percentile : 361,427,854 123,709,715
80.0% percentile : 388,127,343 128,171,047
90.0% percentile : 399,987,762 130,200,707
95.0% percentile : 408,230,673 132,174,308
99.0% percentile : 412,947,017 133,181,160
99.5% percentile : 413,312,798 133,220,425
99.9% percentile : 413,352,366 133,269,051
Less than 2MiB seek: 56.47% 56.83%
The result is very similar to the pathspec-limited log above, which
only looks at the tree objects.
* Packing recent history.
$ (git for-each-ref --format='^%(refname)' refs/tags; echo HEAD) |
git pack-objects --revs --stdout >/dev/null
This should pack data worth 71 commits.
v1.7.6 with patch
Total number of access : 11,511 11,514
0.0% percentile : 0 0
10.0% percentile : 48 47
20.0% percentile : 134 98
30.0% percentile : 332 178
40.0% percentile : 1,386 293
50.0% percentile : 8,030 478
60.0% percentile : 33,676 1,195
70.0% percentile : 147,268 26,216
80.0% percentile : 9,178,662 464,598
90.0% percentile : 67,922,665 965,782
95.0% percentile : 87,773,251 1,226,102
99.0% percentile : 98,011,763 1,932,377
99.5% percentile : 100,074,427 33,642,128
99.9% percentile : 105,336,398 275,772,650
Less than 2MiB seek: 77.09% 99.04%
The long-tail part of the result looks worse with the patch, but
the change helps majority of the access. 99.04% of the accesses
need less than 2MiB of seeking, compared to 77.09% with the current
packing heuristics.
* Index pack.
$ git index-pack -v .git/objects/pack/pack*.pack
v1.7.6 with patch
Total number of access : 2,791,228 2,788,802
0.0% percentile : 9 9
10.0% percentile : 140 89
20.0% percentile : 233 167
30.0% percentile : 322 235
40.0% percentile : 464 310
50.0% percentile : 862 423
60.0% percentile : 2,566 686
70.0% percentile : 25,827 1,498
80.0% percentile : 1,317,862 4,971
90.0% percentile : 11,926,385 119,398
95.0% percentile : 41,304,149 952,519
99.0% percentile : 227,613,070 6,709,650
99.5% percentile : 321,265,121 11,734,871
99.9% percentile : 382,919,785 33,155,191
Less than 2MiB seek: 81.73% 96.92%
As the index-pack command already walks objects in the delta chain
order, writing the blobs out in the delta chain order seems to
drastically improve the locality of access.
Note that a half-a-gigabyte packfile comfortably fits in the buffer cache,
and you would unlikely to see much performance difference on a modern and
reasonably beefy machine with enough memory and local disks. Benchmarking
with cold cache (or over NFS) would be interesting.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* commit 'v1.7.6': (3211 commits)
Git 1.7.6
completion: replace core.abbrevguard to core.abbrev
Git 1.7.6-rc3
Documentation: git diff --check respects core.whitespace
gitweb: 'pickaxe' and 'grep' features requires 'search' to be enabled
t7810: avoid unportable use of "echo"
plug a few coverity-spotted leaks
builtin/gc.c: add missing newline in message
tests: link shell libraries into valgrind directory
t/Makefile: pass test opts to valgrind target properly
sh-i18n--envsubst.c: do not #include getopt.h
Fix typo: existant->existent
Git 1.7.6-rc2
gitweb: do not misparse nonnumeric content tag files that contain a digit
Git 1.7.6-rc1
fetch: do not leak a refspec
t3703: skip more tests using colons in file names on Windows
gitweb: Fix usability of $prevent_xss
gitweb: Move "Requirements" up in gitweb/INSTALL
gitweb: Describe CSSMIN and JSMIN in gitweb/INSTALL
...
> As you probably guessed from the specificity of the number, I wrote a
> short program to actually traverse and find the worst skew. It takes
> about 5 seconds to run (unsurprisingly, since it is doing the same full
> traversal that we end up doing in the above numbers). So we could
> "autoskew" by setting up the configuration on clone, and then
> periodically updating it as part of "git gc".
This patch doesn't implement auto-detection of skew, but is the program
I used to calculate, and would provide the basis for such
auto-detection. It would be interesting to see average skew numbers for
popular repositories. You can run it as "git skew --all".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/streaming:
sha1_file: use the correct type (ssize_t, not size_t) for read-style function
streaming: read loose objects incrementally
sha1_file.c: expose helpers to read loose objects
streaming: read non-delta incrementally from a pack
streaming_write_entry(): support files with holes
convert: CRLF_INPUT is a no-op in the output codepath
streaming_write_entry(): use streaming API in write_entry()
streaming: a new API to read from the object store
write_entry(): separate two helper functions out
unpack_object_header(): make it public
sha1_object_info_extended(): hint about objects in delta-base cache
sha1_object_info_extended(): expose a bit more info
packed_object_info_detail(): do not return a string
Since 03feddd (git-check-ref-format: reject funny ref names, 2005-10-13),
"git branch -d" can take more than one branch names to remove.
The documentation was correct, but the usage string was not.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clone does all of init, "remote add", fetch, and checkout
without giving the user a chance to intervene and set any
configuration. This patch allows you to set config options
in the newly created repository after the clone, but before
we do any other operations.
In many cases, this is a minor convenience over something
like:
git clone git://...
git config core.whatever true
But in some cases, it can bring extra efficiency by changing
how the fetch or checkout work. For example, setting
line-ending config before the checkout avoids having to
re-checkout all of the contents with the correct line
endings.
It also provides a mechanism for passing information to remote
helpers during a clone; the helpers may read the git config
to influence how they operate.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
