Users may want to always use "--show-signature" while using git-log and
related commands.
When log.showSignature is set to true, git-log and related commands will
behave as if "--show-signature" was given to them.
Note that this config variable is meant to affect git-log, git-show,
git-whatchanged and git-reflog. Other commands like git-format-patch,
git-rev-list are not to be affected by this config variable.
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an user creates an alias with "--show-signature" early in command
line, e.g.
[alias] logss = log --show-signature
then there is no way to countermand it through command line.
Teach git-log and related commands about "--no-show-signature" command
line option. This will make "git logss --no-show-signature" run
without showing GPG signature.
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subsequent patches will want to reuse the 'signed' branch that the
'log --graph --show-signature' test creates and uses.
Split the set-up part into a test of its own, and make the existing
test into a separate one that only inspects the history on the 'signed'
branch. This way, it becomes clearer that tests added by subsequent
patches reuse the 'signed' branch in the same way.
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename detection is a very convenient feature, and new users shouldn't
have to dig in the documentation to benefit from it.
Potential objections to activating rename detection are that it
sometimes fail, and it is sometimes slow. But rename detection is
already activated by default in several cases like "git status" and "git
merge", so activating diff.renames does not fundamentally change the
situation. When the rename detection fails, it now fails consistently
between "git diff" and "git status".
This setting does not affect plumbing commands, hence well-written
scripts will not be affected.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
History traversal with "git log --source" that starts with an
annotated tag failed to report the tag as "source", due to an
old regression in the command line parser back in v2.2 days.
* jk/pending-keep-tag-name:
revision.c: propagate tag names from pending array
When we unwrap a tag to find its commit for a traversal, we
do not propagate the "name" field of the tag in the pending
array (i.e., the ref name the user gave us in the first
place) to the commit (instead, we use an empty string). This
means that "git log --source" will never show the tag-name
for commits we reach through it.
This was broken in 2073949 (traverse_commit_list: support
pending blobs/trees with paths, 2014-10-15). That commit
tried to be careful and avoid propagating the path
information for a tag (which would be nonsensical) to trees
and blobs. But it should not have cut off the "name" field,
which should carry forward to children.
Note that this does mean that the "name" field will carry
forward to blobs and trees, too. Whereas prior to 2073949,
we always gave them an empty string. This is the right thing
to do, but in practice no callers probably use it (since now
we have an explicit separate "path" field, which was the
point of 2073949).
We add tests here not only for the broken case, but also a
basic sanity test of "log --source" in general, which did
not have any coverage in the test suite.
Reported-by: Raymundo <gypark@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git init empty && git -C empty log" said "bad default revision 'HEAD'",
which was found to be a bit confusing to new users.
* jk/log-missing-default-HEAD:
log: diagnose empty HEAD more clearly
If you init or clone an empty repository, the initial
message from running "git log" is not very friendly:
$ git init
Initialized empty Git repository in /home/peff/foo/.git/
$ git log
fatal: bad default revision 'HEAD'
Let's detect this situation and write a more friendly
message:
$ git log
fatal: your current branch 'master' does not have any commits yet
We also detect the case that 'HEAD' points to a broken ref;
this should be even less common, but is easy to see. Note
that we do not diagnose all possible cases. We rely on
resolve_ref, which means we do not get information about
complex cases. E.g., "--default master" would use dwim_ref
to find "refs/heads/master", but we notice only that
"master" does not exist. Similarly, a complex sha1
expression like "--default HEAD^2" will not resolve as a
ref.
But that's OK. We fall back to a generic error message in
those cases, and they are unlikely to be used anyway.
Catching an empty or broken "HEAD" improves the common case,
and the other cases are not regressed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
People who work on projects with mostly linear history with frequent
whole file renames may want to always use "git log --follow" when
inspecting the life of the content that live in a single path.
Teach the command to behave as if "--follow" was given from the
command line when log.follow configuration variable is set *and*
there is one (and only one) path on the command line.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
People often forget to chain the commands in their test together
with &&, leaving a failure from an earlier command in the test go
unnoticed. The new GIT_TEST_CHAIN_LINT mechanism allows you to
catch such a mistake more easily.
* jk/test-chain-lint: (36 commits)
t9001: drop save_confirm helper
t0020: use test_* helpers instead of hand-rolled messages
t: simplify loop exit-code status variables
t: fix some trivial cases of ignored exit codes in loops
t7701: fix ignored exit code inside loop
t3305: fix ignored exit code inside loop
t0020: fix ignored exit code inside loops
perf-lib: fix ignored exit code inside loop
t6039: fix broken && chain
t9158, t9161: fix broken &&-chain in git-svn tests
t9104: fix test for following larger parents
t4104: drop hand-rolled error reporting
t0005: fix broken &&-chains
t7004: fix embedded single-quotes
t0050: appease --chain-lint
t9001: use test_when_finished
t4117: use modern test_* helpers
t6034: use modern test_* helpers
t1301: use modern test_* helpers
t0020: use modern test_* helpers
...
"git log --graph --no-walk A B..." is a otcnflicting request that
asks nonsense; no-walk tells us show discrete points in the
history, while graph asks to draw connections between these
discrete points. Forbid the combination.
* dj/log-graph-with-no-walk:
revision: forbid combining --graph and --no-walk
Many tests that predate the "verbose" helper function use a
pattern like:
test ... || {
echo ...
false
}
to give more verbose output. Using the helper, we can do
this with a single line, and avoid a || which interacts
badly with &&-chaining (besides fooling --chain-lint, we hit
the error block no matter which command in the chain failed,
so we may often show useless results).
In most cases, the messages printed by "verbose" are equally
good (in some cases better; t6006 accidentally redirects the
message to a file!). The exception is t7001, whose output
suffers slightly. However, it's still enough to show the
user which part failed, given that we will have just printed
the test script to stderr.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are tests which are missing a link in their &&-chain,
in a location which causes a significant portion of the test
to be missed (e.g., the test effectively does nothing, or
consists of a long string of actions and output comparisons,
and we throw away the exit code of at least one part of the
string).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because "--graph" is about connected history while --no-walk is
about discrete points, it does not make sense to allow these two
options at the same time. [1]
This change makes a few calls to "show --graph" fail in t4052, but
asking to show one commit with graph is a nonsensical thing to do.
Thus, tests on "show --graph" in t4052 have been removed [2,3].
Same tests on "show" without --graph option have already been tested
in 4052.
3 testcases have been added to test this patch.
[1]: http://article.gmane.org/gmane.comp.version-control.git/216083
[2]: http://article.gmane.org/gmane.comp.version-control.git/264950
[3]: http://article.gmane.org/gmane.comp.version-control.git/265107
Helped-By: Eric Sunshine <sunshine@sunshineco.com>
Helped-By: René Scharfe <l.s.r@web.de>
Helped-By: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Dongcan Jiang <dongcan.jiang@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --grep=<string>" shows only commits with messages that
match the given string, but sometimes it is useful to be able to
show only commits that do *not* have certain messages (e.g. "show
me ones that are not FIXUP commits").
Originally, we had the invert-grep flag in grep_opt, but because
"git grep --invert-grep" does not make sense except in conjunction
with "--files-with-matches", which is already covered by
"--files-without-matches", it was moved it to revisions structure.
To have the flag there expresses the function to the feature better.
When the newly inserted two tests run, the history would have commits
with messages "initial", "second", "third", "fourth", "fifth", "sixth"
and "Second", committed in this order. The commits that does not match
either "th" or "Sec" is "second" and "initial". For the case insensitive
case only "initial" matches.
Signed-off-by: Christoph Junghans <ottxor@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git log --graph --show-signature command incorrectly indents the gpg
information about signed commits and merged signed tags. It does not
follow the level of indentation of the current commit.
Example of garbled output:
$ git log --show-signature --graph
* commit 258e0a237cb69aaa587b0a4fb528bb0316b1b776
|\ gpg: Signature made Mon, Jun 30, 2014 13:22:33 EDT using RSA key ID DA08
gpg: Good signature from "Jason Pyeron <jpye...@pdinc.us>"
Merge: 727c355 1ca13ed
| | Author: Jason Pyeron <jpye...@pdinc.us>
| | Date: Mon Jun 30 13:22:29 2014 -0400
| |
| | Merge of 1ca13ed2271d60ba9 branch - rebranding
| |
| * commit 1ca13ed2271d60ba93d40bcc8db17ced8545f172
| | gpg: Signature made Mon, Jun 23, 2014 9:45:47 EDT using RSA key ID DD37
gpg: Good signature from "Stephen Robert Guglielmo <s...@guglielmo.us>"
gpg: aka "Stephen Robert Guglielmo <srguglie...@gmail.com>"
Author: Stephen R Guglielmo <s...@guglielmo.us>
| | Date: Mon Jun 23 09:45:27 2014 -0400
| |
| | Minor URL updates
In log-tree.c modify show_sig_lines() function to call graph_show_oneline()
after each line of gpg information it has printed in order to preserve
the level of indentation for the next output line.
Reported-by: Jason Pyeron <jpyeron@pdinc.us>
Signed-off-by: Zoltan Klinger <zoltan.klinger@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In diff_tree_combined we make a copy of diffopts. In
try_to_follow_renames, called via diff_tree_sha1, we free and
re-initialize diffopts->pathspec->items. Since we did not make a deep
copy of diffopts in diff_tree_combined, the original diffopts does not
get the update. By the time we return from diff_tree_combined,
rev->diffopt->pathspec->items points to an invalid memory address. We
get a segfault next time we try to access that pathspec.
Instead, along with the copy of diffopts, make a copy pathspec->items as
well.
We would also have to make a copy of pathspec->raw to keep it consistent
with pathspec->items, but nobody seems to rely on that.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Additionally, instead of
git config <key> ""
or
git config --unset <key>
uses
test_unconfig <key>
The latter doesn't failed if <key> is not defined.
Tests are modified to assume correct (default) configuration at entry,
and to reset the modified configuration variables at the end.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --graph code fell into infinite loop when asked to do what the
code did not expect.
* mk/maint-graph-infinity-loop:
graph.c: infinite loop in git whatchanged --graph -m
Fixes many rfc2047 quoting issues in the output from format-patch.
* js/format-2047:
format-patch tests: check quoting/encoding in To: and Cc: headers
format-patch: fix rfc2047 address encoding with respect to rfc822 specials
format-patch: make rfc2047 encoding more strict
format-patch: introduce helper function last_line_length()
format-patch: do not wrap rfc2047 encoded headers too late
format-patch: do not wrap non-rfc2047 headers too early
utf8: fix off-by-one wrapping of text
The wrapping logic in strbuf_add_wrapped_text() does currently not allow
lines that entirely fill the allowed width, instead it wraps the line one
character too early.
For example, the text "This is the sixth commit." formatted via
"%w(11,1,2)" (wrap at 11 characters, 1 char indent of first line, 2 char
indent of following lines) results in four lines: " This is", " the",
" sixth", " commit." This is wrong, because " the sixth" is exactly
11 characters long, and thus allowed.
Fix this by allowing the (width+1) character of a line to be a valid
wrapping point if it is a whitespace character.
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line option parser for "git log -F -E --grep='<ere>'"
did not flip the "fixed" bit, violating the general "last option
wins" principle among conflicting options.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running "whatchanged --graph -m" on a simple two-head merges
can fall into infinite loop.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cherry-pick A C B" used to replay changes in A and then B and
then C if these three commits had committer timestamps in that
order, which is not what the user who said "A C B" naturally expects.
* mz/cherry-pick-cmdline-order:
cherry-pick/revert: respect order of revisions to pick
demonstrate broken 'git cherry-pick three one two'
teach log --no-walk=unsorted, which avoids sorting
"git log .." errored out saying it is both rev range and a path when
there is no disambiguating "--" is on the command line. Update the
command line parser to interpret ".." as a path in such a case.
* jc/dotdot-is-parent-directory:
specifying ranges: we did not mean to make ".." an empty set
When 'git log' is passed the --no-walk option, no revision walk takes
place, naturally. Perhaps somewhat surprisingly, however, the provided
revisions still get sorted by commit date. So e.g 'git log --no-walk
HEAD HEAD~1' and 'git log --no-walk HEAD~1 HEAD' give the same result
(unless the two revisions share the commit date, in which case they
will retain the order given on the command line). As the commit that
introduced --no-walk (8e64006 (Teach revision machinery about
--no-walk, 2007-07-24)) points out, the sorting is intentional, to
allow things like
git log --abbrev-commit --pretty=oneline --decorate --all --no-walk
to show all refs in order by commit date.
But there are also other cases where the sorting is not wanted, such
as
<command producing revisions in order> |
git log --oneline --no-walk --stdin
To accomodate both cases, leave the decision of whether or not to sort
up to the caller, by allowing --no-walk={sorted,unsorted}, defaulting
to 'sorted' for backward-compatibility reasons.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the i18n-specific test functions in test scripts for diffstat.
This issue was was introduced in v1.7.9-1-g7f814:
7f814 Use correct grammar in diffstat summary line
and been broken under GETTEXT_POISON=YesPlease since.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Either end of revision range operator can be omitted to default to HEAD,
as in "origin.." (what did I do since I forked) or "..origin" (what did
they do since I forked). But the current parser interprets ".." as an
empty range "HEAD..HEAD", and worse yet, because ".." does exist on the
filesystem, we get this annoying output:
$ cd Documentation/howto
$ git log .. ;# give me recent commits that touch Documentation/ area.
fatal: ambiguous argument '..': both revision and filename
Use '--' to separate filenames from revisions
Surely we could say "git log ../" or even "git log -- .." to disambiguate,
but we shouldn't have to.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Number of columns required for change counts is now computed based on
the maximum number of changed lines instead of being fixed. This means
that usually a few more columns will be available for the filenames
and the graph.
The graph width logic is also modified to include enough space for
"Bin XXX -> YYY bytes".
If changes to binary files are mixed with changes to text files,
change counts are padded to take at least three columns. And the other
way around, if change counts require more than three columns, then
"Bin"s are padded to align with the change count. This way, the +-
part starts in the same column as "XXX -> YYY" part for binary files.
This makes the graph easier to parse visually thanks to the empty
column. This mimics the layout of diff --stat before this change.
Tests and the tutorial are updated to reflect the new --stat output.
This means either the removal of extra padding and/or the addition of
up to three extra characters to truncated filenames. One test is added
to check the graph alignment when a binary file change and text file
change of more than 999 lines are committed together.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"log -p --graph" used with "--stat" had a few formatting error.
By Lucian Poston
* lp/maint-diff-three-dash-with-graph:
t4202: add test for "log --graph --stat -p" separator lines
log --graph: fix break in graph lines
log --graph --stat: three-dash separator should come after graph lines
Add tests to make sure that the three-dash separator lines appear
after the graph ancestry lines, and also the graph ancestry lines
are not broken between the diffstat and the patch.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also updates the autogenerated merge title message from "merge commit X"
to "merge tag X", and its effect can be seen in the changes to the test suite.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add log.abbrevCommit config variable as a convenience for users who
often use --abbrev-commit with git log and friends. Allow the option
to be overridden with --no-abbrev-commit. Per 635530a2fc and 4f62c2bc57,
the config variable is ignored when log is given "--pretty=raw".
(Also, a drive-by spelling correction in git log's short help.)
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We explicitly document "0" and "1" as synonyms for "false"
and "true" in boolean config options. However, we don't
actually handle those values in git_config_maybe_bool.
In most cases this works fine, as we call git_config_bool,
which in turn calls git_config_bool_or_int, which in turn
calls git_config_maybe_bool. Values of 0/1 are considered
"not bool", but their integer values end up being converted
to the corresponding boolean values.
However, the log.decorate code looks for maybe_bool
explicitly, so that it can fall back to the "short" and
"full" strings. It does not handle 0/1 at all, and considers
them invalid values.
We cannot simply add 0/1 support to git_config_maybe_bool.
That would confuse git_config_bool_or_int, which may want to
distinguish the integer values "0" and "1" from bools.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Breaks in a test assertion's && chain can potentially hide
failures from earlier commands in the chain.
Commands intended to fail should be marked with !, test_must_fail, or
test_might_fail. The examples in this patch do not require that.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/shortopt-detached:
log: parse separate option for --glob
log: parse separate options like git log --grep foo
diff: parse separate options --stat-width n, --stat-name-width n
diff: split off a function for --stat-* option parsing
diff: parse separate options like -S foo
Conflicts:
revision.c
Add a regression test for the git log -M --follow $diff_option bug
introduced in v1.7.2-rc0~103^2~2, $diff_option being diff related
options like -p, --stat, --name-only etc.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the option parsing logic in revision.c to accept separate forms
like `-S foo' in addition to `-Sfoo'. The rest of git already accepted
this form, but revision.c still used its own option parsing.
Short options affected are -S<string>, -l<num> and -O<orderfile>, for
which an empty string wouldn't make sense, hence -<option> <arg> isn't
ambiguous.
This patch does not handle --stat-name-width and --stat-width, which are
special-cases where diff_long_opt do not apply. They are handled in a
separate patch to ease review.
Original patch by Matthieu Moy, plus refactoring by Jonathan Nieder.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike notes that are often multi-line and disrupting to be placed in many
output formats, a decoration is designed to be a small token that can be
tacked after an existing line of the output where a commit object name sits.
Disabling log.decorate for something like "log --oneline" would defeat the
purpose of the configuration.
We _might_ want to change it further in the future to force scripts that
do not want to be broken by random end user configurations to explicitly
say "log --no-decorate", but that would be an incompatible change that
needs the usual multi-release-cycle deprecation process.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many scripts, most notably gitk, rely on output from the log family of
command not to be molested by random user configuration. This is
especially true when --pretty=raw is given.
Just like we disable notes output unless the command line explicitly
asks for --show-notes, disable the decoration code unless --decorate is
given explicitly from the command line and --pretty or --oneline is
given.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration is meant to suppliment --decorate command line option
that can be used as a boolean to turn the feature on, so it is natural
to expect
[log]
decorate
decorate = yes
to work. The original commit would segfault with the first one, and
would not understand the second one.
Once a user has this configuration in ~/.gitconfig, there needs to be a
way to override it from the command line. Add --no-decorate option to
log family and also allow --decorate=no to mean the same thing. Since
we allow setting log.decorate to 'true', the command line also should
accept --decorate=yes and behave accordingly.
New tests in t4202 are designed to exercise the interaction between the
configuration variable and the command line option that overrides it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using a dollar sign in double quotes isn't portable. Escape them with
a backslash or replace the double quotes with single quotes.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new helper function, strbuf_add_indented_text(), to indent text
without a width limit, and call it from strbuf_add_wrapped_text(). It
respects both indent (applied to the first line) and indent2 (applied to
the rest of the lines); indent2 was ignored by the indent-only path of
strbuf_add_wrapped_text() before the patch.
Two simple test cases are added, one exercising strbuf_add_wrapped_text()
and the other strbuf_add_indented_text().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we have both a tag and a branch named "foo", then calling
"git merge foo" will warn about the ambiguous ref, but merge
the tag.
When generating the commit message, though, we simply
checked whether "refs/heads/foo" existed, and if it did,
assumed it was a branch. This led to the statement "Merge
branch 'foo'" in the commit message, which is quite wrong.
Instead, we should use dwim_ref to find the actual ref used,
and describe it appropriately.
In addition to the test in t7608, we must also tweak the
expected output of t4202, which was accidentally triggering
this bug.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git log --no-walk' sorts commits by commit time whereas 'git show' does
not (it leaves them as given on the command line). Document this by two
tests so that we never forget why ba1d450 (Tentative built-in "git
show", 2006-04-15) introduced it and 8e64006 (Teach revision machinery
about --no-walk, 2007-07-24) exposed it as an option argument.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
