The interactive version of rebase does all the operations on a detached
HEAD, so that after a successful rebase, <branch>@{1} is the pre-rebase
state. The reflogs of "HEAD" still show all the actions in detail.
This teaches the non-interactive version to do the same.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Start preparing for 1.5.3.6
git-send-email: Change the prompt for the subject of the initial message.
SubmittingPatches: improve the 'Patch:' section of the checklist
instaweb: Minor cleanups and fixes for potential problems
stop t1400 hiding errors in tests
Makefile: add missing dependency on wt-status.h
refresh_index_quietly(): express "optional" nature of index writing better
Fix sed string regex escaping in module_name.
Avoid a few unportable, needlessly nested "...`...".
git-mailsplit: with maildirs not only process cur/, but also new/
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last rm in the test was lacking an "&&" before it,
which caused the errors in the commands be silently hidden.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing to overwrite a ref that points at a commit we do
not even have, the recent "terse push" patch tried to get a
unique abbreviation for the non-existent (from our point of
view) object, which resulted in strcpy(buf, NULL) and
segfaulted.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to being made a builtin git-ls-remote understood that when
it was given a remote name we wanted it to resolve that to the
pre-configured URL and connect to that location. That changed when
it was converted to a builtin and many of my automation tools broke.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests check whether git-tag properly sends a comment into the
editor, and whether it reuses previous annotation when overwriting
an existing tag.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
upload-pack spawns two processes, rev-list and pack-objects, and carefully
monitors their status so that it can report failure to the remote end.
This change removes the complicated procedures on the grounds of the
following observations:
- If everything is OK, rev-list closes its output pipe end, upon which
pack-objects (which reads from the pipe) sees EOF and terminates itself,
closing its output (and error) pipes. upload-pack reads from both until
it sees EOF in both. It collects the exit codes of the child processes
(which indicate success) and terminates successfully.
- If rev-list sees an error, it closes its output and terminates with
failure. pack-objects sees EOF in its input and terminates successfully.
Again upload-pack reads its inputs until EOF. When it now collects
the exit codes of its child processes, it notices the failure of rev-list
and signals failure to the remote end.
- If pack-objects sees an error, it terminates with failure. Since this
breaks the pipe to rev-list, rev-list is killed with SIGPIPE.
upload-pack reads its input until EOF, then collects the exit codes of
the child processes, notices their failures, and signals failure to the
remote end.
- If upload-pack itself dies unexpectedly, pack-objects is killed with
SIGPIPE, and subsequently also rev-list.
The upshot of this is that precise monitoring of child processes is not
required because both terminate if either one of them dies unexpectedly.
This allows us to use finish_command() and finish_async() instead of
an explicit waitpid(2) call.
The change is smaller than it looks because most of it only reduces the
indentation of a large part of the inner loop.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of forking update-index, call refresh_cache() directly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since reset is a builtin now, it can use the full power of libgit.a
and check for unmerged entries itself.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an option could be an ambiguous abbreviation of two options, the code
used to error out. Even if an exact match would have occured later.
Test and original patch by Pierre Habouzit.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Remove a couple of duplicated include
grep with unmerged index
git-daemon: fix remote port number in log entry
git-svn: t9114: verify merge commit message in test
git-svn: fix dcommit clobbering when committing a series of diffs
On a case insensitive file system, this test fails because git-diff
doesn't know if it is asking for the file "A" or the tag "a".
Adding "--" at the end of the ambiguous commands allows the test to
finish properly.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's possible that we end up with an incorrect commit message
in this test after making changes to fix the clobber bug
in dcommit.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our revision number sent to SVN is set to the last revision we
committed if we've made any previous commits in a dcommit
invocation.
Although our SVN Editor code uses the delta of two (old) trees
to generate information to send upstream, it'll still send
complete resultant files upstream; even if the tree they're
based against is out-of-date.
The combination of sending a file that does not include the
latest changes, but set with a revision number of a commit we
just made will cause SVN to accept the resultant file even if it
was generated against an old tree.
More trouble was caused when fixing this because we were
rebasing uncessarily at times. We used git-diff-tree to check
the imported SVN revision against our HEAD, not the last tree we
committed to SVN. The unnecessary rebasing caused merge commits
upstream to SVN to fail.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sq_quote_buf() treats single-quotes and exclamation marks specially, but
it incorrectly parsed the input for single-quotes and backslashes.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the clean.requireForce configuration default to true.
Too many people are burned by typing "git clean" by mistake when
they meant to say "make clean".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just because there wasn't a test for --numbered isn't a good reason
not to test format.numbered. So now we test both.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/format-patch-encoding:
test format-patch -s: make sure MIME content type is shown as needed
format-patch -s: add MIME encoding header if signer's name requires so
* jn/gitweb:
gitweb: Use config file for repository description and URLs
gitweb: Read repo config using 'git config -z -l'
gitweb: Add tests for overriding gitweb config with repo config
gitweb: Use href(-replay=>1, action=>...) to generate alternate views
gitweb: Use href(-replay=>1, page=>...) to generate pagination links
gitweb: Easier adding/changing parameters to current URL
gitweb: Remove CGI::Carp::set_programname() call from t9500 gitweb test
gitweb: Add 'status_str' to parse_difftree_raw_line output
gitweb: Always set 'from_file' and 'to_file' in parse_difftree_raw_line
The purpose of the function update_index_from_diff() (which is the
callback function we give do_diff_cache()) is to update those index
entries which differ from the given commit.
Since do_diff_cache() plays games with the in-memory index, this function
discarded the cache and reread it.
Then, back in the function read_from_tree() we wrote the index.
Of course, this broke down when there were no changes and
update_index_from_diff() was not called, and therefore the mangled index
was not discarded.
The solution is to move the index writing into the function
update_index_from_diff().
Noticed by Björn Steinbrink.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make blame view and snapshot support overridable by repository
config. Test tree view with both features disabled, and with both
features enabled.
Test with features enabled also tests multiple formats snapshot
support (in tree view).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Fixing path quoting in git-rebase
Remove unecessary hard-coding of EDITOR=':' VISUAL=':' in some test suites.
Documentation: quote commit messages consistently.
Remove escaping of '|' in manpage option sections
* ph/parseopt: (24 commits)
gc: use parse_options
Fixed a command line option type for builtin-fsck.c
Make builtin-pack-refs.c use parse_options.
Make builtin-name-rev.c use parse_options.
Make builtin-count-objects.c use parse_options.
Make builtin-fsck.c use parse_options.
Update manpages to reflect new short and long option aliases
Make builtin-for-each-ref.c use parse-opts.
Make builtin-symbolic-ref.c use parse_options.
Make builtin-update-ref.c use parse_options
Make builtin-revert.c use parse_options.
Make builtin-describe.c use parse_options
Make builtin-branch.c use parse_options.
Make builtin-mv.c use parse-options
Make builtin-rm.c use parse_options.
Port builtin-add.c to use the new option parser.
parse-options: allow callbacks to take no arguments at all.
parse-options: Allow abbreviated options when unambiguous
Add shortcuts for very often used options.
parse-options: make some arguments optional, add callbacks.
...
Conflicts:
Makefile
builtin-add.c
They are already set and exoprted by sourcing ./test-lib.sh
in all test scripts.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does appear to do nothing; gitweb is run as standalone program
and not as CGI script in this test. This call caused problems later.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/forkexec:
Use the asyncronous function infrastructure to run the content filter.
Avoid a dup2(2) in apply_filter() - start_command() can do it for us.
t0021-conversion.sh: Test that the clean filter really cleans content.
upload-pack: Run rev-list in an asynchronous function.
upload-pack: Move the revision walker into a separate function.
Use the asyncronous function infrastructure in builtin-fetch-pack.c.
Add infrastructure to run a function asynchronously.
upload-pack: Use start_command() to run pack-objects in create_pack_file().
Have start_command() create a pipe to read the stderr of the child.
Use start_comand() in builtin-fetch-pack.c instead of explicit fork/exec.
Use run_command() to spawn external diff programs instead of fork/exec.
Use start_command() to run content filters instead of explicit fork/exec.
Use start_command() in git_connect() instead of explicit fork/exec.
Change git_connect() to return a struct child_process instead of a pid_t.
Conflicts:
builtin-fetch-pack.c
* cc/skip:
Bisect: add "skip" to the short usage string.
Bisect run: "skip" current commit if script exit code is 125.
Bisect: add a "bisect replay" test case.
Bisect: add "bisect skip" to the documentation.
Bisect: refactor "bisect_{bad,good,skip}" into "bisect_state".
Bisect: refactor some logging into "bisect_write".
Bisect: refactor "bisect_write_*" functions.
Bisect: implement "bisect skip" to mark untestable revisions.
Bisect: fix some white spaces and empty lines breakages.
rev-list documentation: add "--bisect-all".
rev-list: implement --bisect-all
When there is an option "--amend", the option parser now recognizes
"--am" for that option, provided that there is no other option beginning
with "--am".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is incompatible with previous versions because an exit code
of 125 used to mark current commit as "bad". But hopefully this exit
code is not much used by test scripts or other programs. (126 and 127
are used by POSIX compliant shells to mean "found but not
executable" and "command not found", respectively.)
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there are some "skip"ped revisions, we add the '--bisect-all'
option to "git rev-list --bisect-vars". Then we filter out the
"skip"ped revisions from the result of the rev-list command, and we
modify the "bisect_rev" var accordingly.
We don't always use "--bisect-all" because it is slower
than "--bisect-vars" or "--bisect".
When we cannot find for sure the first bad commit because of
"skip"ped commits, we print the hash of each possible first bad
commit and then we exit with code 2.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Using konsole, I get no colored output at the end of "t7005-editor.sh"
without this patch.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This shuts down the "* ok ##: `test description`" messages.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/fetch-pack: (60 commits)
Define compat version of mkdtemp for systems lacking it
Avoid scary errors about tagged trees/blobs during git-fetch
fetch: if not fetching from default remote, ignore default merge
Support 'push --dry-run' for http transport
Support 'push --dry-run' for rsync transport
Fix 'push --all branch...' error handling
Fix compilation when NO_CURL is defined
Added a test for fetching remote tags when there is not tags.
Fix a crash in ls-remote when refspec expands into nothing
Remove duplicate ref matches in fetch
Restore default verbosity for http fetches.
fetch/push: readd rsync support
Introduce remove_dir_recursively()
bundle transport: fix an alloc_ref() call
Allow abbreviations in the first refspec to be merged
Prevent send-pack from segfaulting when a branch doesn't match
Cleanup unnecessary break in remote.c
Cleanup style nit of 'x == NULL' in remote.c
Fix memory leaks when disconnecting transport instances
Ensure builtin-fetch honors {fetch,transfer}.unpackLimit
...
* maint:
Describe more 1.5.3.5 fixes in release notes
Fix diffcore-break total breakage
Fix directory scanner to correctly ignore files without d_type
Improve receive-pack error message about funny ref creation
fast-import: Fix argument order to die in file_change_m
git-gui: Don't display CR within console windows
git-gui: Handle progress bars from newer gits
git-gui: Correctly report failures from git-write-tree
gitk.txt: Fix markup.
send-pack: respect '+' on wildcard refspecs
git-gui: accept versions containing text annotations, like 1.5.3.mingw.1
git-gui: Don't crash when starting gitk from a browser session
git-gui: Allow gitk to be started on Cygwin with native Tcl/Tk
git-gui: Ensure .git/info/exclude is honored in Cygwin workdirs
git-gui: Handle starting on mapped shares under Cygwin
git-gui: Display message box when we cannot find git in $PATH
git-gui: Avoid using bold text in entire gui for some fonts
This test uses a rot13 filter, which is its own inverse. It tested only
that the content was the same as the original after both the 'clean' and
the 'smudge' filter were applied. This way it would not detect whether
any filter was run at all. Hence, here we add another test that checks
that the repository contained content that was processed by the 'clean'
filter.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When matching source and destination refs, we were failing
to pull the 'force' parameter from wildcard refspecs (but
not explicit ones) and attach it to the ref struct.
This adds a test for explicit and wildcard refspecs; the
latter fails without this patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
Further 1.5.3.5 fixes described in release notes
Avoid invoking diff drivers during git-stash
attr: fix segfault in gitattributes parsing code
Define NI_MAXSERV if not defined by operating system
Ensure we add directories in the correct order
Avoid scary errors about tagged trees/blobs during git-fetch
git may segfault if gitattributes contains an invalid
entry. A test is added to t0020 that triggers the segfault.
The parsing code is fixed to avoid the crash.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The first test (updating local refs) should succeed without the
prior commit, but the second one (not updating on error) used to
fail before the prior commit was written.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
Yet more 1.5.3.5 fixes mentioned in release notes
cvsserver: Use exit 1 instead of die when req_Root fails.
git-blame shouldn't crash if run in an unmerged tree
git-config: print error message if the config file cannot be read
fixing output of non-fast-forward output of post-receive-email
If we are in the middle of resolving a merge conflict there may be
one or more files whose entries in the index represent an unmerged
state (index entries in the higher-order stages).
Attempting to run git-blame on any file in such a working directory
resulted in "fatal: internal error: ce_mode is 0" as we use the magic
marker for an unmerged entry is 0 (set up by things like diff-lib.c's
do_diff_cache() and builtin-read-tree.c's read_tree_unmerged())
and the ce_match_stat_basic() function gets upset about this.
I'm not entirely sure that the whole "ce_mode = 0" case is a good
idea to begin with, and maybe the right thing to do is to remove
that horrid freakish special case, but removing the internal error
seems to be the simplest fix for now.
Linus
[sp: Thanks to Björn Steinbrink for the test case]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This allows one to easily retrieve a list of svn properties from within
git-svn without requiring svn or knowing the URL of a repository.
* git-svn.perl (%cmd): Add the command `proplist'.
(&cmd_proplist): New.
* t/t9101-git-svn-props.sh: Test git svn proplist.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This allows one to easily retrieve a single SVN property from within
git-svn without requiring svn or remembering the URL of a repository
* git-svn.perl (%cmd): Add the new command `propget'.
($cmd_dir_prefix): New global.
(&get_svnprops): New helper.
(&cmd_propget): New. Use &get_svnprops.
* t/t9101-git-svn-props.sh: Add a test case for propget.
[ew: make sure the rev-parse --show-prefix call doesn't break
the `git-svn clone' command]
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git svn create-ignore (to create one .gitignore per directory
from the svn:ignore properties. This has the disadvantage of
committing the .gitignore during the next dcommit, but when you
import a repo with tons of ignores (>1000), using git svn show-ignore
to build .git/info/exclude is *not* a good idea, because things like
git-status will end up doing >1000 fnmatch *per file* in the repo,
which leads to git-status taking more than 4s on my Core2Duo 2Ghz 2G
RAM)
* git-svn.perl (%cmd): Add the new command `create-ignore'.
(&cmd_create_ignore): New.
* t/t9101-git-svn-props.sh: Adjust the test-case for show-ignore and
add a test case for create-ignore.
[ew: added commit message from
<05CAB148-56ED-4FF1-8AAB-4BA2A0B70C2C@lrde.epita.fr> ]
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
Document additional 1.5.3.5 fixes in release notes
Avoid 'expr index' on Mac OS X as it isn't supported
filter-branch: update current branch when rewritten
fix filter-branch documentation
helpful error message when send-pack finds no refs in common.
Fix setup_git_directory_gently() with relative GIT_DIR & GIT_WORK_TREE
Correct typos in release notes for 1.5.3.5
Earlier, "git filter-branch --<options> HEAD" would not update the
working tree after rewriting the branch. This commit fixes it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There are a few programs, such as config and diff, which allow running
without a git repository. Therefore, they have to call
setup_git_directory_gently().
However, when GIT_DIR and GIT_WORK_TREE were set, and the current
directory was a subdirectory of the work tree,
setup_git_directory_gently() would return a bogus NULL prefix.
This patch fixes that.
Noticed by REPLeffect on IRC.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When doing "git fetch <remote>" on a remote that does not have the
branch referenced in branch.<current-branch>.merge, git fetch failed.
It failed because it tried to add the "merge" ref to the refs to be
fetched.
Fix that. And add a test case.
Incidentally, this unconvered a bug in our own test suite, where
"git pull <some-path>" was expected to merge the ref given in the
defaults, even if not pulling from the default remote.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There's a number of tricky conflicts between master and
this topic right now due to the rewrite of builtin-push.
Junio must have handled these via rerere; I'd rather not
deal with them again so I'm pre-merging master into the
topic. Besides this topic somehow started to depend on
the strbuf series that was in next, but is now in master.
It no longer compiles on its own without the strbuf API.
* master: (184 commits)
Whip post 1.5.3.4 maintenance series into shape.
Minor usage update in setgitperms.perl
manual: use 'URL' instead of 'url'.
manual: add some markup.
manual: Fix example finding commits referencing given content.
Fix wording in push definition.
Fix some typos, punctuation, missing words, minor markup.
manual: Fix or remove em dashes.
Add a --dry-run option to git-push.
Add a --dry-run option to git-send-pack.
Fix in-place editing functions in convert.c
instaweb: support for Ruby's WEBrick server
instaweb: allow for use of auto-generated scripts
Add 'git-p4 commit' as an alias for 'git-p4 submit'
hg-to-git speedup through selectable repack intervals
git-svn: respect Subversion's [auth] section configuration values
gtksourceview2 support for gitview
fix contrib/hooks/post-receive-email hooks.recipients error message
Support cvs via git-shell
rebase -i: use diff plumbing instead of porcelain
...
Conflicts:
Makefile
builtin-push.c
rsh.c
The default behaviour of git-push is potentially confusing
for new users, since it will push changes that are not on
the current branch. Publishing patches that were still
cooking on a development branch is hard to undo.
It would also be nice to be able to verify the expansion
of refspecs if you've edited them, so that you know
what branches matched on the server.
Adding a --dry-run flag allows the user to experiment
safely and learn how to use git-push properly. Originally
suggested by Steffen Prohaska.
Signed-off-by: Brian Ewins <brian.ewins@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When a user runs "git fetch -t", git crashes when it doesn't find any
tags on the remote repository.
Signed-off-by: Väinö Järvelä <v@pp.inet.fi>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This fixes an unnecessary empty line that we add to the log message when
we generate diffs, but don't actually end up printing any due to having
DIFF_FORMAT_NO_OUTPUT set.
This can happen with pickaxe or with rename following. The reason is that
we normally add an empty line between the commit and the diff, but we do
that even for the case where we've then suppressed the actual printing of
the diff.
This also updates a couple of tests that assumed the extraneous empty
line would exist at the end of output.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* ph/strbuf: (44 commits)
Make read_patch_file work on a strbuf.
strbuf_read_file enhancement, and use it.
strbuf change: be sure ->buf is never ever NULL.
double free in builtin-update-index.c
Clean up stripspace a bit, use strbuf even more.
Add strbuf_read_file().
rerere: Fix use of an empty strbuf.buf
Small cache_tree_write refactor.
Make builtin-rerere use of strbuf nicer and more efficient.
Add strbuf_cmp.
strbuf_setlen(): do not barf on setting length of an empty buffer to 0
sq_quote_argv and add_to_string rework with strbuf's.
Full rework of quote_c_style and write_name_quoted.
Rework unquote_c_style to work on a strbuf.
strbuf API additions and enhancements.
nfv?asprintf are broken without va_copy, workaround them.
Fix the expansion pattern of the pseudo-static path buffer.
builtin-for-each-ref.c::copy_name() - do not overstep the buffer.
builtin-apply.c: fix a tiny leak introduced during xmemdupz() conversion.
Use xmemdupz() in many places.
...
* lh/merge:
git-merge: add --ff and --no-ff options
git-merge: add support for --commit and --no-squash
git-merge: add support for branch.<name>.mergeoptions
git-merge: refactor option parsing
git-merge: fix faulty SQUASH_MSG
Add test-script for git-merge porcelain
* ap/dateformat:
Add a test script for for-each-ref, including test of date formatting
dateformat: parse %(xxdate) %(yydate:format) correctly
Make for-each-ref's grab_date() support per-atom formatting
Make for-each-ref allow atom names like "<name>:<something>"
parse_date_format(): convert a format name to an enum date_mode
This tests basic functionality and also exercises a bug noticed
by Keith Packard, (prune_cache followed by add_index_entry can
trigger an attempt to realloc a pointer into the middle of an
allocated buffer).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We lost rsync support when transitioning from shell to C. Support it
again (even if the transport is technically deprecated, some people just
do not have any chance to use anything else).
Also, add a test to t5510. Since rsync transport is not configured by
default on most machines, and especially not such that you can write to
rsync://127.0.0.1$(pwd)/, it is disabled by default; you can enable it by
setting the environment variable TEST_RSYNC.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-remote: exit with non-zero status after detecting errors.
rebase -i: squash should retain the authorship of the _first_ commit
git-add--interactive: Improve behavior on bogus input
git-add--interactive: Allow Ctrl-D to exit
It was determined on the mailing list, that it makes more sense for a
"squash" to keep the author of the first commit as the author for the
result of the squash.
Make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updated post-checkout hook to take a flag specifying whether the checkout is
a branch checkout or a file checkout (from the index).
Signed-off-by: Josh England <jjengla@sandia.gov>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sv/svn:
git-svn: handle changed svn command-line syntax
git-svn: fix test for trunk svn (transaction out of date)
git-svn: fix test for trunk svn (commit message not needed)
Earlier, rebase -i refused to rebase a detached HEAD. Now it no longer
does.
Incidentally, this fixes "git gc --auto" shadowing the true exit status.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the interporate() to replace entries with NULL values
by the empty string, and uses it to interpolate missing fields in
custom format output used in git-log and friends. It is most useful
to avoid <unknown> output from %b format for a commit log message
that lack any body text.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When doing an "edit" on a commit, editing and git-adding some files,
"git rebase -i" complained about a missing "author-script". The idea was
that the user would call "git commit --amend" herself.
But we can be nice and do that for the user.
Noticed by Dmitry Potapov.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Do not over-quote the -f envelopesender value.
unexpected Make output (e.g. from --debug) causes build failure
Fixed minor typo in t/t9001-send-email.sh test command line.
The git-send-email command line in the test was missing a single hyphen.
Signed-off-by: Glenn Rempe <glenn@rempe.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These new options can be used to control the policy for fast-forward
merges: --ff allows it (this is the default) while --no-ff will create
a merge commit.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These options can be used to override --no-commit and --squash, which is
needed since --no-commit and --squash now can be specified as default merge
options in $GIT_DIR/config.
The change also introduces slightly different behavior for --no-commit:
when specified, it explicitly overrides --squash. Earlier,
'git merge --squash --no-commit' would result in a squashed merge (i.e. no
$GIT_DIR/MERGE_HEAD was created) but with this patch the command will
behave as if --squash hadn't been specified.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This enables per branch configuration of merge options. Currently, the most
useful options to specify per branch are --squash, --summary/--no-summary
and possibly --strategy, but all options are supported.
Note: Options containing whitespace will _not_ be handled correctly. Luckily,
the only option which can include whitespace is --message and it doesn't
make much sense to give that option a default value.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test-script excercises the porcelainish aspects of git-merge, and
does it thoroughly enough to detect a small bug already noticed by Junio:
squashing an octopus generates a faulty .git/SQUASH_MSG.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, if you passed a revision and a path to svn cp, it meant to look
back at that revision and select that path. New behaviour is to get the
path then go back to the revision (like other commands that accept @REV
or -rREV do). The more consistent syntax is not supported by the old
tools, so we have to try both in turn.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Older svn clients did not raise a 'transaction out of date' error here, but
trunk does - so 'svn up'.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'svn mv -m "rename to thunk"' was a local operation, therefore not
needing a commit message, it was silently ignored. Newer svn clients will
instead raise an error.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
My prior bug fix for git-push titled "Don't configure remote "." to
fetch everything to itself" actually broke t5520 as we were unable
to evaluate a branch configuration of:
[branch "copy"]
remote = .
merge = refs/heads/master
as remote "." did not have a "remote...fetch" configuration entry to
offer up refs/heads/master as a possible candidate available to be
fetched and merged. In shell script git-fetch and prior to the above
mentioned commit this was hardcoded for a url of "." to be the set of
local branches.
Chasing down this bug led me to the conclusion that our prior behavior
with regards to branch.$name.merge was incorrect. In the shell script
based git-fetch implementation we only fetched and merged a branch if
it appeared both in branch.$name.merge *and* in remote.$r.fetch, where
$r = branch.$name.remote. In other words in the following config file:
[remote "origin"]
url = git://git.kernel.org/pub/scm/git/git.git
fetch = refs/heads/master:refs/remotes/origin/master
[branch "master"]
remote = origin
merge = refs/heads/master
[branch "pu"]
remote = origin
merge = refs/heads/pu
Attempting to run `git pull` while on branch "pu" would always give
the user "Already up-to-date" as git-fetch did not fetch pu and thus
did not mark it for merge in .git/FETCH_HEAD. The configured merge
would always be ignored and the user would be left scratching her
confused head wondering why merge did not work on "pu" but worked
fine on "master".
If we are using the "default fetch" specification for the current
branch and the current branch has a branch.$name.merge configured
we now union it with the list of refs in remote.$r.fetch. This
way the above configuration does what the user expects it to do,
which is to fetch only "master" by default but when on "pu" to
fetch both "master" and "pu".
This uncovered some breakage in the test suite where old-style Cogito
branches (.git/branches/$r) did not fetch the branches listed in
.git/config for merging and thus did not actually merge them if the
user tried to use `git pull` on that branch. Junio and I discussed
it on list and felt that the union approach here makes more sense to
DWIM for the end-user than silently ignoring their configured request
so the test vectors for t5515 have been updated to include for-merge
lines in .git/FETCH_HEAD where they have been configured for-merge
in .git/config.
Since we are now performing a union of the fetch specification and
the merge specification and we cannot allow a branch to be listed
twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to
perform a double loop here over all of the branch.$name.merge lines
and try to set their merge flag if we have already schedule that
branch for fetching by remote.$r.fetch. If no match is found then
we must add new specifications to fetch the branch but not store it
as no local tracking branch has been designated.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This was actually reverted in 756373da by Junio. We no longer
support merging the right hand side of a fetchspec in a branch's
branch.$name.merge configuration setting as we interpret these
names as being only those published by the remote we are going to
fetch from.
The older shell based implementation of git-fetch did not report an
error when branch.$name.merge was referencing a branch that does
not exist on the remote and we are running `git fetch` for the
current branch. The new builtin-fetch does notice this failure
and aborts the fetch, thus breaking the tests.
Junio and I kicked it around on #git earlier today and decided that
the best approach here is to error out and tell the user that their
configuration is wrong, as this is likely more user friendly than
silently ignoring the user's request. Since the new builtin-fetch
is already issuing the error there is no code change required, we
just need to remove the bad configuration from our test.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Thanks to Johannes Schindelin for review and fixes, and Julian
Phillips for the original C translation.
This changes a few small bits of behavior:
branch.<name>.merge is parsed as if it were the lhs of a fetch
refspec, and does not have to exactly match the actual lhs of a
refspec, so long as it is a valid abbreviation for the same ref.
branch.<name>.merge is no longer ignored if the remote is configured
with a branches/* file. Neither behavior is useful, because there can
only be one ref that gets fetched, but this is more consistant.
Also, fetch prints different information to standard out.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* master: (94 commits)
Fixed update-hook example allow-users format.
Documentation/git-svn: updated design philosophy notes
t/t4014: test "am -3" with mode-only change.
git-commit.sh: Shell script cleanup
preserve executable bits in zip archives
Fix lapsus in builtin-apply.c
git-push: documentation and tests for pushing only branches
git-svnimport: Use separate arguments in the pipe for git-rev-parse
contrib/fast-import: add perl version of simple example
contrib/fast-import: add simple shell example
rev-list --bisect: Bisection "distance" clean up.
rev-list --bisect: Move some bisection code into best_bisection.
rev-list --bisect: Move finding bisection into do_find_bisection.
Document ls-files --with-tree=<tree-ish>
git-commit: partial commit of paths only removed from the index
git-commit: Allow partial commit of file removal.
send-email: make message-id generation a bit more robust
git-apply: fix whitespace stripping
git-gui: Disable native platform text selection in "lists"
apply --index-info: fall back to current index for mode changes
...
The post-merge hook enables one to hook in for `git pull` operations in order
to check and/or change attributes of a work tree from the hook. As an example,
it can be used in combination with a pre-commit hook to save/restore file
ownership and permissions data (or file ACLs) within the repository and
transparently update the working tree after a `git pull` operation.
Signed-off-by: Josh England <jjengla@sandia.gov>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Fixed update-hook example allow-users format.
Documentation/git-svn: updated design philosophy notes
t/t4014: test "am -3" with mode-only change.
Fix lapsus in builtin-apply.c
git-push: documentation and tests for pushing only branches
git-svnimport: Use separate arguments in the pipe for git-rev-parse
Earlier commit ece7b74903 added a test
for rebase that uses "am -3", but this adds a test to check "am -3"
itself.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 098e711e caused git-push to match only branches when
considering which refs to push. This patch updates the
documentation accordingly and adds a test for this behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cr/reset:
Simplify cache API
An additional test for "git-reset -- path"
Make "git reset" a builtin.
Move make_cache_entry() from merge-recursive.c into read-cache.c
Add tests for documented features of "git reset".
Because a partial commit is meant to be a way to ignore what are
staged in the index, "git rm --cached A && git commit A" should
just record what is in A on the filesystem. The previous patch
made the command sequence to barf, saying that A has not been
added yet. This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When making a partial commit, git-commit uses git-ls-files with
the --error-unmatch option to expand and sanity check the user
supplied path patterns. When any path pattern does not match
with the paths known to the index, it errors out, in order to
catch a common mistake to say "git commit Makefiel cache.h"
and end up with a commit that touches only cache.h (notice the
misspelled "Makefile"). This detection however does not work
well when the path has already been removed from the index.
If you drop a path from the index and try to commit that
partially, i.e.
$ git rm COPYING
$ git commit -m 'Remove COPYING' COPYING
the command complains because git does not know anything about
COPYING anymore.
This introduces a new option --with-tree to git-ls-files and
uses it in git-commit when we build a temporary index to
write a tree object for the partial commit.
When --with-tree=<tree-ish> option is specified, names from the
given tree are added to the set of names the index knows about,
so we can treat COPYING file in the example as known.
Of course, there is no reason to use "git rm" and git-aware
people have long time done:
$ rm COPYING
$ git commit -m 'Remove COPYING' COPYING
which works just fine. But this caused a constant confusion.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-apply: fix whitespace stripping
apply --index-info: fall back to current index for mode changes
core-tutorial: minor cleanup
documentation: replace Discussion section by link to user-manual chapter
user-manual: todo updates and cleanup
user-manual: fix introduction to packfiles
user-manual: move packfile and dangling object discussion
user-manual: rewrite object database discussion
user-manual: reorder commit, blob, tree discussion
user-manual: rewrite index discussion
user-manual: create new "low-level git operations" chapter
user-manual: rename "git internals" to "git concepts"
user-manual: move object format details to hacking-git chapter
user-manual: adjust section levels in "git internals"
revision walker: --cherry-pick is a limited operation
git-sh-setup: typofix in comments
"git diff" does not record index lines for pure mode changes (i.e. no
lines changed). Therefore, apply --index-info would call out a bogus
error.
Instead, fall back to reading the info from the current index.
Incidentally, this fixes an error where git-rebase would not rebase a
commit including a pure mode change, and changes requiring a threeway
merge.
Noticed and later tested by Chris Shoemaker.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to rely on the fact that cherry-pick would trigger the code path
to set limited = 1 in handle_commit(), when an uninteresting commit was
encountered.
However, when cherry picking between two independent branches, i.e. when
there are no merge bases, and there is only linear development (which can
happen when you cvsimport a fork of a project), no uninteresting commit
will be encountered.
So set limited = 1 when --cherry-pick was asked for.
Noticed by Martin Bähr.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/partial-remove:
Document ls-files --with-tree=<tree-ish>
git-commit: partial commit of paths only removed from the index
git-commit: Allow partial commit of file removal.
Because a partial commit is meant to be a way to ignore what are
staged in the index, "git rm --cached A && git commit A" should
just record what is in A on the filesystem. The previous patch
made the command sequence to barf, saying that A has not been
added yet. This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/grep-c:
Split grep arguments in a way that does not requires to add /dev/null.
Documentation/git-config.txt: AsciiDoc tweak to avoid leading dot
Add test to check recent fix to "git add -u"
Documentation/git-archive.txt: a couple of clarifications.
Fix the rename detection limit checking
diff --no-index: do not forget to run diff_setup_done()
In order to (almost) always show the name of the file without
relying on "-H" option of GNU grep, we used to add /dev/null to
the argument list unless we are doing -l or -L. This caused
"/dev/null:0" to show up when -c is given in the output.
It is not enough to add -c to the set of options we do not pass
/dev/null for. When we have too many files, we invoke grep
multiple times and we need to avoid giving a widow filename to
the last invocation -- otherwise we will not see the name.
This keeps two filenames when the argv[] buffer is about to
overflow and we have not finished iterating over the index, so
that the last round will always have at least two paths to work
with (and not require /dev/null).
An obvious and the only exception is when there is only 1 file
that is given to the underlying grep, and in that case we avoid
passing /dev/null and let the external "grep -c" report only the
number of matches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier commit fixed type-change case in "git add -u".
This adds a test to make sure we do not introduce regression.
At the same time, it fixes a stupid typo in the error message.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before the strbuf conversion, result was a char pointer. The if
statement checked for it being not NULL, which meant that no
"$Format:...$" string had been found and no replacement had to be
made. format_subst() returned NULL in that case -- the caller
then simply kept the original file content, as it was unaffected
by the expansion.
The length of the string being 0 is not the same as the string
being NULL (expansion to an empty string vs. no expansion at all),
so checking result.len != 0 is not a full replacement for the old
NULL check.
However, I doubt the subtle optimization explained above resulted
in a notable speed-up anyway. Simplify the code and add the tail
of the file to the expanded string unconditionally.
[jc: added a test to expose the breakage this fixes]
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When making a partial commit, git-commit uses git-ls-files with
the --error-unmatch option to expand and sanity check the user
supplied path patterns. When any path pattern does not match
with the paths known to the index, it errors out, in order to
catch a common mistake to say "git commit Makefiel cache.h"
and end up with a commit that touches only cache.h (notice the
misspelled "Makefile"). This detection however does not work
well when the path has already been removed from the index.
If you drop a path from the index and try to commit that
partially, i.e.
$ git rm COPYING
$ git commit -m 'Remove COPYING' COPYING
the command complains because git does not know anything about
COPYING anymore.
This introduces a new option --with-tree to git-ls-files and
uses it in git-commit when we build a temporary index to
write a tree object for the partial commit.
When --with-tree=<tree-ish> option is specified, names from the
given tree are added to the set of names the index knows about,
so we can treat COPYING file in the example as known.
Of course, there is no reason to use "git rm" and git-aware
people have long time done:
$ rm COPYING
$ git commit -m 'Remove COPYING' COPYING
which works just fine. But this caused a constant confusion.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the new file t/t7102-reset.sh following the text
and examples in "Documentation/git-reset.txt" in order to
check the behaviour of the upcoming "builtin-reset.c",
and be able to compare it with the original "git-reset.sh".
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
stash: end index commit log with a newline
git-commit: Disallow amend if it is going to produce an empty non-merge commit
git-send-email.perl: Add angle brackets to In-Reply-To if necessary
Fix a test failure (t9500-*.sh) on cygwin
On filesystems where it is appropriate to set core.filemode
to false, test 29 ("commitdiff(0): mode change") fails when
git-commit does not notice a file (execute) permission change.
A fix requires noting the new file execute permission in the
index with a "git update-index --chmod=+x", prior to the commit.
Add a function (note_chmod) which implements this idea, and
insert a call in each test that modifies the x permission.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/archive:
archive - leakfix for format_subst()
Define NO_MEMMEM on Darwin as it lacks the function
archive: rename attribute specfile to export-subst
archive: specfile syntax change: "$Format:%PLCHLDR$" instead of just "%PLCHLDR" (take 2)
add memmem()
Remove unused function convert_sha1_file()
archive: specfile support (--pretty=format: in archive files)
Export format_commit_message()
Most of this patch code and message was written by Shawn O. Pearce.
I made some tests to know what the problem was, and then I changed
the code related with the SIGPIPE signal.
If the user has misconfigured `user.signingkey` in their .git/config
or just doesn't have any secret keys on their keyring and they ask
for a signed tag with `git tag -s` we better make sure the resulting
tag was actually signed by gpg.
Prior versions of builtin git-tag allowed this failure to slip
by without error as they were not checking the return value of
the finish_command() so they did not notice when gpg exited with
an error exit status. They also did not fail if gpg produced an
empty output or if read_in_full received an error from the read
system call while trying to read the pipe back from gpg.
Finally, we did not actually honor any return value from the do_sign
function as it returns ssize_t but was being stored into an unsigned
long. This caused the compiler to optimize out the die condition,
allowing git-tag to continue along and create the tag object.
However, when gpg gets a wrong username, it exits before any read was done
and then the writing process receives SIGPIPE and program is terminated.
By ignoring this signal, anyway, the function write_or_die gets EPIPE from
write_in_full and exits returning 0 to the system without a message.
Here we better call to write_in_full directly so we can fail
printing a message and return safely to the caller.
With these issues fixed `git-tag -s` will now fail to create the
tag and will report a non-zero exit status to its caller, thereby
allowing automated helper scripts to detect (and recover from)
failure if gpg is not working properly.
Proposed-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to squelch empty diffs introduced by commit
fb13227e08 would inadvertently
populate filespec "two" of a submodule change using the uninitialized
(null) SHA1, thereby replacing the submodule SHA1 by 0{40} in the output.
This change teaches diffcore_skip_stat_unmatch to handle
submodule changes correctly.
Signed-off-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As suggested by Junio and Johannes, change the name of the former
attribute specfile to export-subst to indicate its function rather
than purpose and to make clear that it is not applied to working tree
files.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As suggested by Johannes, --pretty=format: placeholders in specfiles
need to be wrapped in $Format:...$ now. This syntax change restricts
the expansion of placeholders and makes it easier to use with files
that contain non-placeholder percent signs.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kristian Høgsberg pointed out that the two file modifications
we were doing during the 'creating initial files' step are not even
used within the test suite. This was actually confusing as we do
not even need these changes for the tests to pass. All that really
matters here is the specific commit dates are used so that these
appear in the branch's reflog, and that the dates are different so
that the branch will update when asked and the reflog entry is
also updated. There is no need for the file modification.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the preimage we are patching is shorter than what the patch
text expects, we tried to match the buffer contents at the
"original" line with the fragment in full, without checking we
have enough data to match in the preimage. This caused the size
of a later memmove() to wrap around and attempt to scribble
almost the entire address space. Not good.
The code that follows the part this patch touches tries to match
the fragment with line offsets. Curiously, that code does not
have the problem --- it guards against reading past the end of
the preimage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for a new attribute, specfile. Files marked as being
specfiles are expanded by git-archive when they are written to an
archive. It has no effect on worktree files. The same placeholders
as those for the option --pretty=format: of git-log et al. can be
used.
The attribute is useful for creating auto-updating specfiles. It is
limited by the underlying function format_commit_message(), though.
E.g. currently there is no placeholder for git-describe like output,
and expanded specfiles can't contain NUL bytes. That can be fixed
in format_commit_message() later and will then benefit users of
git-log, too.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a topic branch is rebased, some of whose commits are already
cherry-picked upstream:
o--X--A--B--Y <- master
\
A--B--Z <- topic
then 'git rebase -m master' would report:
Already applied: 0001 Y
Already applied: 0002 Y
With this fix it reports the expected:
Already applied: 0001 A
Already applied: 0002 B
As an added bonus, this change also avoids 'echo' of a commit message,
which might contain escapements.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch removes certain behaviour of "git tag -l foo", currently
listing every tag name having "foo" as a substring. The same
thing now could be achieved doing "git tag -l '*foo*'".
This feature was added recently when git-tag.sh got the -n option
for showing tag annotations, because that commit also replaced the
old "grep pattern" behaviour with a more preferable "shell pattern"
behaviour (although slightly modified as you can see).
Thus, the following builtin-tag.c implemented it in order to
ensure that tests were passing unchanged with both programs.
Since common "shell patterns" match names with a given substring
_only_ when * is inserted before and after (as in "*substring*"), and
the "plain" behaviour cannot be achieved easily with the current
implementation, this is mostly the right thing to do, in order to
make it more flexible and consistent.
Tests for "git tag" were also changed to reflect this.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although dcommit could detect if the first commit in the series
would conflict with the HEAD revision in SVN, it could not
detect conflicts in further commits it made.
Now we rebase each uncommitted change after each revision is
committed to SVN to ensure that we are up-to-date. git-rebase
will bail out on conflict errors if our next change cannot be
applied and committed to SVN cleanly, preventing accidental
clobbering of changes on the SVN-side.
--no-rebase users will have trouble with this, and are thus
warned if they are committing more than one commit. Fixing this
for (hopefully uncommon) --no-rebase users would be more complex
and will probably happen at a later date.
Thanks to David Watson for finding this and the original test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this function, a commit filter can leave out unwanted commits
(such as temporary commits). It does _not_ undo the changeset
corresponding to that commit, but it _skips_ the revision. IOW
no tree object is changed by this.
If you like to commit early and often, but want to filter out all
intermediate commits, marked by "@@@" in the commit message, you can
now do this with
git filter-branch --commit-filter '
if git cat-file commit $GIT_COMMIT | grep '@@@' > /dev/null;
then
skip_commit "$@";
else
git commit-tree "$@";
fi' newbranch
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the convenience functions to the top of git-filter-branch.sh, and
return from the script when the environment variable SOURCE_FUNCTIONS is
set.
By sourcing git-filter-branch with that variable set automatically, all
commit filters may access the convenience functions like "map".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This clarifies the logic to omit fast-forward check and omit
trivial merge before running the specified strategy.
The "index_merge" variable started out as a flag to say "do not
do anything clever", but when recursive was changed to skip the
trivial merge, the semantics were changed and the variable alone
does not make sense anymore.
This splits the variable into two, allow_fast_forward (which is
almost always true, and avoids making a merge commit when the
other commit is a descendant of our branch, but is set to false
for ours and subtree) and allow_trivial_merge (which is false
for ours, recursive and subtree).
Unlike the earlier implementation, the "ours" strategy allows an
up-to-date condition. When we are up-to-date, the result will
be our commit, and by definition, we will have our tree as the
result.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Here is my attempt to fix this with a minimally intrusive patch.
* As "git --bare init" cannot tell if it was called with --bare or
just "GIT_DIR=. git init", I added an explicit assignment of
is_bare_repository_cfg on the codepath for "git --bare".
* GIT_WORK_TREE alone without GIT_DIR does not make any sense,
nor GIT_WORK_TREE with an explicit "git --bare". Catch that
mistake. It might make sense to move this check to "git.c"
side as well, but I tried to shoot for the minimum change for
now.
* Some scripts, especially from the olden days, rely on
traditional GIT_DIR behaviour in "git init". Namely, these
are some notable patterns:
(create a bare repository)
- mkdir some.git && cd some.git && GIT_DIR=. git init
- mkdir some.git && cd some.git && git --bare init
(create a non-bare repository)
- mkdir .git && GIT_DIR=.git git init
- mkdir .git && GIT_DIR=`pwd`/.git git init
This comes with a new test script and also passes the existing
test suite, but there may be cases that are still broken with
the current tip of master and this patch does not yet fix. I'd
appreciate help in straightening this mess out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After git-write-tree finishes computing the tree, it updates the
index so that later operations can take advantage of fully
populated cache tree.
However, anybody writing the index file has to mark the entries
that are racily clean. For each entry whose cached lstat(3)
data in the index exactly matches what is obtained from the
filesystem, if the timestamp on the index file was the same or
older than the modification timestamp of the file, the blob
contents and the work tree file, after convert_to_git(), need to
be compared, and if they are different, its index entry needs to
be marked not to match the lstat(3) data from the filesystem.
In order for this to work, convert_to_git() needs to work
correctly, which in turn means you need to read the config file
to get the settings of core.crlf and friends.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When squashing, rebase -i did not prevent fast forwards. This could
happen when picking some other commit than the first one, and then
squashing the first commit. So do not allow fast forwards when
squashing.
Noticed by Johannes Sixt.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a thin pack wants to send a tree object at "sub/dir", and
the commit that is common between the sender and the receiver
that is used as the base object has a subproject at that path,
we should not try to use the data at "sub/dir" of the base tree
as a tree object. It is not a tree to begin with, and more
importantly, the commit object there does not have to even
exist.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing checkpoint command is very useful to force fast-import
to dump the branches out to disk so that standard Git tools can
access them and the objects they refer to. However there was not a
way to know when fast-import had finished executing the checkpoint
and it was safe to read those refs.
The progress command can be used to make fast-import output any
message of the frontend's choosing to standard out. The frontend
can scan for these messages using select() or poll() to monitor a
pipe connected to the standard output of fast-import.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
For the same reasons as the prior change we want to allow frontends
to omit the trailing LF that usually delimits commands. In some
cases these just make the input stream more verbose looking than
it needs to be, and its just simpler for the frontend developer to
get started if our parser is slightly more lenient about where an
LF is required and where it isn't.
To make this optional LF feature work we now have to buffer up to one
line of input in command_buf. This buffering can happen if we look
at the current input command but don't recognize it at this point
in the code. In such a case we need to "unget" the entire line,
but we cannot depend upon the stdio library to let us do ungetc()
for that many characters at once.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
A few fast-import frontend developers have found it odd that we
require the LF following a `data` command, especially in the exact
byte count format. Technically we don't need this LF to parse
the stream properly, but having it here does make the stream more
readable to humans. We can easily make the LF optional by peeking
at the next byte available from the stream and pushing it back into
the buffer if its not LF.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Several frontend developers have asked that some form of stream
comments be permitted within a fast-import data stream. This way
they can include information from their own frontend program about
where specific data was taken from in the source system, or about
a decision that their frontend may have made while creating the
fast-import data stream.
This change introduces comments in the Bourne-shell/Tcl/Perl style.
Lines starting with '#' are ignored, up to and including the LF.
Unlike the above mentioned three languages however we do not look for
and ignore leading whitespace. This just simplifies the definition
of the comment format and the code that parses them.
To make comments work we had to stop using read_next_command() within
cmd_data() and directly invoke read_line() during the inline variant
of the function. This is necessary to retain any lines of the
input data that might otherwise look like a comment to fast-import.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Michael Haggerty <mhagger@alum.mit.edu> noticed while debugging a
Git backend for cvs2svn that fast-import was barfing when he tried
to use "TAG_FIXUP" as a branch name for temporary work needed to
cleanup the tree prior to creating an annotated tag object.
The reason we were rejecting the branch name was check_ref_format()
returns -2 when there are less than 2 '/' characters in the input
name. TAG_FIXUP has 0 '/' characters, but is technically just as
valid of a ref as HEAD and MERGE_HEAD, so we really should permit it
(and any other similar looking name) during import.
New test cases have been added to make sure we still detect very
wrong branch names (e.g. containing [ or starting with .) and yet
still permit reasonable names (e.g. TAG_FIXUP).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The t1301-shared-repo.sh testscript uses /usr/bin/stat to get the file
mode, which isn't portable. Implement the test in shell using 'ls' as
shown by Junio.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply "Subproject commit HEX" changes produced by git-diff.
As usual in the current git, only the superproject itself is actually
modified (possibly creating empty directories for new submodules).
Any checked-out submodule is left untouched and is not required to
be up-to-date.
With clean-ups from Junio C Hamano.
Signed-off-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-add -u also takes the path limiters, but unlike the
command without the -u option, the code forgot that it
could be invoked from a subdirectory, and did not correctly
handle the prefix.
Signed-off-by: Salikh Zakirov <salikh@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This applies to 'maint' to fix a rather serious data corruption
issue. When "git add -u" affects a subdirectory in such a way
that the only changes to its contents are path removals, the
next tree object written out of that index was bogus, as the
remove codepath forgot to invalidate the cache-tree entry.
Reported by Salikh Zakirov.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running git-svn log <ref> -r<rev> against a <ref> other than the
current HEAD did not work if the <rev> was exclusive to the
other branch.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes .gitattributes files to be read from the index when
they are not checked out to the work tree. This is in line with
the way we always allowed low-level tools to operate in sparsely
checked out work tree in a reasonable way.
It swaps the order of new file creation and converting the blob
to work tree representation; otherwise when we are in the middle
of checking out .gitattributes we would notice an empty but
unwritten .gitattributes file in the work tree and will ignore
the copy in the index.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you try to merge a path that involves binary file-level
merge, merge-recursive died rudely without cleaning up its own
mess. A files added by the merge were left in the working tree,
but the index was not written out (because it just punted and
died), so it was cumbersome for the user to retry it by first
running "git reset --hard".
This changes merge-recursive to still warn but do the "binary"
merge for such a path; leave the "our" version in the working
tree, but still keep the path unmerged so that the user can sort
it out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows / cygwin don't support HT, LF, or TAB in file name so this test
is meaningless there.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows to refresh only a subset of the project files, based on
the specified pathspecs.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Here-text to create fake-editor did not use <<\EOF but <<EOF,
but there was no point doing so, as it quoted all the variables
anyway. Simplify it.
Also futureproof the special mode to edit COMMIT_EDITMSG file;
it is interested in editing the COMMIT_EDITMSG file in any
GIT_DIR; GIT_DIR may be given as an absolute path.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cr/tag:
Teach "git stripspace" the --strip-comments option
Make verify-tag a builtin.
builtin-tag.c: Fix two memory leaks and minor notation changes.
launch_editor(): Heed GIT_EDITOR and core.editor settings
Make git tag a builtin.
While "git bundle" was a useful way to sneakernet incremental
changes, we did not allow:
$ git bundle create v2.6.20.bndl v2.6.20
to create a bundle that contains the whole history to a
well-known good revision. Such a bundle can be mirrored
everywhere, and people can prime their repository with it to
reduce the load on the repository that serves near the tip of
the development.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old behaviour was to unilaterally default to the cwd is the work tree
when GIT_DIR was set, but GIT_WORK_TREE wasn't, no matter if we are inside
the GIT_DIR, or if GIT_DIR is actually something like ../../../.git.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hashed contents did not matter in the end result, but it passed
an uninitialized variable to printf, which caused it to emit empty
while giving an error/usage message.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the behaviour of cloning from a repository on the
local machine, by defaulting to "-l" (use hardlinks to share
files under .git/objects) and making "-l" a no-op. A new
option, --no-hardlinks, is also added to cause file-level copy
of files under .git/objects while still avoiding the normal
"pack to pipe, then receive and index pack" network transfer
overhead. The old behaviour of local cloning without -l nor -s
is availble by specifying the source repository with the newly
introduced file:///path/to/repo.git/ syntax (i.e. "same as
network" cloning).
* With --no-hardlinks (i.e. have all .git/objects/ copied via
cpio) would not catch the source repository corruption, and
also risks corrupted recipient repository if an
alpha-particle hits memory cell while indexing and resolving
deltas. As long as the recipient is created uncorrupted, you
have a good back-up.
* same-as-network is expensive, but it would catch the breakage
of the source repository. It still risks corrupted recipient
repository due to hardware failure. As long as the recipient
is created uncorrupted, you have a good back-up.
* The new default on the same filesystem, as long as the source
repository is healthy, it is very likely that the recipient
would be, too. Also it is very cheap. You do not get any
back-up benefit, though.
None of the method is resilient against the source repository
corruption, so let's discount that from the comparison. Then
the difference with and without --no-hardlinks matters primarily
if you value the back-up benefit or not. If you want to use the
cloned repository as a back-up, then it is cheaper to do a clone
with --no-hardlinks and two git-fsck (source before clone,
recipient after clone) than same-as-network clone, especially as
you are likely to do a git-fsck on the recipient if you are so
paranoid anyway.
Which leads me to believe that being able to use file:/// is
probably a good idea, if only for testability, but probably of
little practical value. We default to hardlinked clone for
everyday use, and paranoids can use --no-hardlinks as a way to
make a back-up.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling "git rebase -i <upstream> <branch>", git should switch
to <branch> first. This worked before, but I broke it by my
"Shut git rebase -i up" patch.
Fix that, and add a test to make sure that it does not break again.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[jc: adjusted t/t7501 as this makes -F and --amend compatible]
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Non-interactive rebase had this from the beginning -- match it by
using --cherry-pick option to rev-list.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old version of work-tree support was an unholy mess, barely readable,
and not to the point.
For example, why do you have to provide a worktree, when it is not used?
As in "git status". Now it works.
Another riddle was: if you can have work trees inside the git dir, why
are some programs complaining that they need a work tree?
IOW it is allowed to call
$ git --git-dir=../ --work-tree=. bla
when you really want to. In this case, you are both in the git directory
and in the working tree. So, programs have to actually test for the right
thing, namely if they are inside a working tree, and not if they are
inside a git directory.
Also, GIT_DIR=../.git should behave the same as if no GIT_DIR was
specified, unless there is a repository in the current working directory.
It does now.
The logic to determine if a repository is bare, or has a work tree
(tertium non datur), is this:
--work-tree=bla overrides GIT_WORK_TREE, which overrides core.bare = true,
which overrides core.worktree, which overrides GIT_DIR/.. when GIT_DIR
ends in /.git, which overrides the directory in which .git/ was found.
In related news, a long standing bug was fixed: when in .git/bla/x.git/,
which is a bare repository, git formerly assumed ../.. to be the
appropriate git dir. This problem was reported by Shawn Pearce to have
caused much pain, where a colleague mistakenly ran "git init" in "/" a
long time ago, and bare repositories just would not work.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds convenience functions to work with absolute paths.
The function is_absolute_path() should help the efforts to integrate
the MinGW fork.
Note that make_absolute_path() returns a pointer to a static buffer.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check for non-0 exit code if the confiog file does not exist and
if it works exactly like when setting GIT_CONFIG.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes rebase/am keep the original commit log message
better, even when it does not conform to "single line paragraph
to say what it does, then explain and defend why it is a good
change in later paragraphs" convention.
This change is a two-edged sword. While the earlier behaviour
would make such commit log messages more friendly to readers who
expect to get the birds-eye view with oneline summary formats,
users who primarily use git as a way to interact with foreign
SCM systems would not care much about the convenience of oneline
git log tools, but care more about preserving their own
convention. This changes their commits less useful to readers
who read them with git tools while keeping them more consistent
with the foreign SCM systems they interact with.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bs/lock:
Add test for symlinked configuration file updates.
use lockfile.c routines in git_commit_set_multivar()
fully resolve symlinks when creating lockfiles
The tree recursion behavior of git-diff may appear
inconsistent to the user because it depends on the format of
the patch as well as whether one is diffing between trees or
against the index.
Since git-diff is a porcelain wrapper for low-level diff
commands, it makes sense for its behavior to be consistent
no matter what is being diffed. This patch turns on
recursion in all cases.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify and make more readable validation of 'opt' (extra options)
parameter, using exists($hash{key}) instead of grepping keys of a hash
for value.
Move 'opt' parameter to be the last (for now) in the URL.
Make use of '--no-merges' extra option ('opt') by adding "no merges"
RSS and Atom feeds to the HTML header. Note that alternate format
links in the RSS and Atom views do not use '--no-merges' option yet!
Adds tests for the 'opt' parameter to t9500-gitweb-standalone-no-errors.sh
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a squashing merge failed, the first commit would not be replaced,
due to "git reset --soft" being called with an unmerged index.
Noticed by Uwe Kleine-König.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --strip-comments (or short -s), git stripspace now removes lines
beginning with a '#', too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We say "SUBDIRECTORY_OK" but we did not chdir to toplevel; this
is fine as long as everything we use can be started from a
subdirectory, but unfortunately "merge-recursive" is not one of
the programs you can safely use from a subdirectory.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CVS/Entries file can contain a line with single D to say "this
directory does not have any subdirectories". Do not get
confused with such an entry.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are useful in organizations that enforce particular formats
for commit messages, e.g., to specify bug IDs or test plans.
Use of the template is not enforced; it is simply used as the
initial content when the editor is invoked.
Signed-off-by: Steven Grimm <koreth@midwinter.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to take the first non-option argument as the name for the new
branch. This syntax is not extensible to support rewriting more than just
HEAD.
Instead, we now have the following syntax:
git filter-branch [<filter options>...] [<rev-list options>]
All positive refs given in <rev-list options> are rewritten. Yes,
in-place. If a ref was changed, the original head is stored in
refs/original/$ref now, for your inspecting pleasure, in addition to the
reflogs (since it is easier to inspect "git show-ref | grep original" than
to inspect all the reflogs).
This commit also adds the --force option to remove .git-rewrite/ and all
refs from refs/original/ before filtering.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A repeated call to read_sha1_file was not freing memory
when the buffer was allocated but returned size was zero.
Also, now the program does not allow many -F or -m options,
which was a bug too because it was not freing the memory
allocated for any previous -F or -m options.
Tests are provided for ensuring that only one option
-F or -m is given. Also, another test is shipped here,
to check that "git tag" fails when a non-existing file
is passed to the -F option, something that git-tag.sh
allowed creating the tag with an empty message.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes you want to squash more than two commits. Before this patch,
the editor was fired up for each squash command. Now the editor is
started only with the last squash command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces the script "git-tag.sh" with "builtin-tag.c".
The existing test suite for "git tag" guarantees the compatibility
with the features provided by the script version.
There are some minor changes in the behaviour of "git tag" here:
"git tag -v" now can get more than one tag to verify, like "git tag -d" does,
"git tag" with no arguments prints all tags, more like "git branch" does,
and "git tag -n" also prints all tags with annotations (without needing -l).
Tests and documentation were also updated to reflect these changes.
The program is currently calling the script "git verify-tag" for verify.
This can be changed porting it to C and calling its functions directly
from builtin-tag.c.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These variables let you specify an editor that will be launched in
preference to the EDITOR and VISUAL environment variables. The order
of preference is GIT_EDITOR, core.editor, EDITOR, VISUAL.
[jc: added a test and config variable documentation]
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, when moving back to a commit without a given submodule
and then moving back forward to a commit with the given submodule,
we shouldn't complain that updating would lose untracked file in
the submodule, because git currently does not checkout subprojects
during superproject check-out.
Signed-off-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Renaming files with non-URI friendly characters caused
breakage when committing to DAV repositories (over http(s)).
Even if I try leaving out the $self->{url} from the return value
of url_path(), a partial (without host), unescaped path name
does not work.
Filenames for DAV repos need to be URI-encoded before being
passed to the library. Since this bug did not affect file://
and svn:// repos, the git-svn test library needed to be expanded
to include support for starting Apache with mod_dav_svn enabled.
This new test is not enabled by default, but can be enabled by
setting SVN_HTTPD_PORT to any available TCP/IP port on
127.0.0.1.
Additionally, for running this test, the following variables
(with defaults shown) can be changed for the suitable system.
The default values are set for Debian systems:
SVN_HTTPD_MODULE_PATH=/usr/lib/apache2/modules
SVN_HTTPD_PATH=/usr/sbin/apache2
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://repo.or.cz/git/fastimport:
Teach fast-import to recursively copy files/directories
Fix git-p4 on Windows to not use the Posix sysconf function.
Correct trivial typo in fast-import documentation
Some source material (e.g. Subversion dump files) perform directory
renames by telling us the directory was copied, then deleted in the
same revision. This makes it difficult for a frontend to convert
such data formats to a fast-import stream, as all the frontend has
on hand is "Copy a/ to b/; Delete a/" with no details about what
files are in a/, unless the frontend also kept track of all files.
The new 'C' subcommand within a commit allows the frontend to make a
recursive copy of one path to another path within the branch, without
needing to keep track of the individual file paths. The metadata
copy is performed in memory efficiently, but is implemented as a
copy-immediately operation, rather than copy-on-write.
With this new 'C' subcommand frontends could obviously implement an
'R' (rename) on their own as a combination of 'C' and 'D' (delete),
but since we have already offered up 'R' in the past and it is a
trivial thing to keep implemented I'm not going to deprecate it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In the previous behavior, "git-rm --cached" (without -f) had the same
restriction as "git-rm". This forced the user to use the -f flag in
situations which weren't actually dangerous, like:
$ git add foo # oops, I didn't want this
$ git rm --cached foo # back to initial situation
Previously, the index had to match the file *and* the HEAD. With
--cached, the index must now match the file *or* the HEAD. The behavior
without --cached is unchanged, but provides better error messages.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
GIT 1.5.2.4
Teach read-tree 2-way merge to ignore intermediate symlinks
git-gui: Work around bad interaction between Tcl and cmd.exe on ^{tree}
git-gui: Don't linewrap within console windows
git-gui: Correct ls-tree buffering problem in browser
git-gui: Skip nicknames when selecting author initials
git-gui: Ensure windows shortcuts always have .bat extension
git-gui: Include a Push action on the left toolbar
git-gui: Bind M1-P to push action
git-gui: Don't bind F5/M1-R in all windows
git-gui: Unlock the index when cancelling merge dialog
git-gui: properly popup error if gitk should be started but is not installed
Earlier in 16a4c61, we taught "read-tree -m -u" not to be
confused when switching from a branch that has a path frotz/filfre
to another branch that has a symlink frotz that points at xyzzy/
directory. The fix was incomplete in that it was still confused
when coming back (i.e. switching from a branch with frotz -> xyzzy/
to another branch with frotz/filfre).
This fix is rather expensive in that for a path that is created
we would need to see if any of the leading component of that
path exists as a symbolic link in the filesystem (in which case,
we know that path itself does not exist, and the fact we already
decided to check it out tells us that in the index we already
know that symbolic link is going away as there is no D/F
conflict).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch cleans up some complicated code, and replaces it with a
cleaner version, using code from remote.[ch], which got extended a
little in the process. This also enables us to fix two cases:
The earlier "fix" to setup tracking only when the original ref started
with "refs/remotes" is wrong. You are absolutely allowed to use a
separate layout for your tracking branches. The correct fix, of course,
is to set up tracking information only when there is a matching
remote.<nick>.fetch line containing a colon.
Another corner case was not handled properly. If two remotes write to
the original ref, just warn the user and do not set up tracking.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests check the syntax for the git tag -n option
and its output when one, none or many lines of the
message are requested.
Also this commit adds a missing && in the test
that checks the sorted output of git tag -l.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previous tests only had paragraphs of one line. This commit adds some
tests to check when many consecutive text lines are given.
Also, it adds tests for checking that many lines between paragraphs are
correctly reduced to one when there are tabs and spaces in those lines.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Moved some tests to another test_expect_success block.
Many tests now reuse the same "expect" file. Also replacing
many printf "" >expect with one >expect instruction.
Added missing && which concatenated tests in some
test_expect_success blocks.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you say --cherry-pick, you do not want to see patches which are
in the upstream. If you specify paths with that, what you usually
expect is that only those parts of the patches are looked at which
actually touch the given paths.
With this patch, that expectation is met.
Noticed by Sam Vilain.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For compatibility reasons, "git init --shared=all" does not write
"all" into the config, but a number. In the shared setup, you
really have to support even older clients on the _same_ repository.
But git_config_perm() did not pick up on it.
Also, "git update-server-info" failed to pick up on the shared
permissions.
This patch fixes both issues, and adds a test to prove it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tested-by: martin f krafft <madduck@madduck.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two-file merges were rare enough that they were dropped outside of the
radar. This fix is a trivial change to builtin-rerere.c::find_conflict().
It is still sane to insist that we do not do rerere for symlinks, and
require to have stages #2 and #3, but we can drop the requirement to have
stage #1. rerere does not use information from there anyway.
This fix is from Junio, together with two tests to verify that it works
as expected.
Acked-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some source material (e.g. Subversion dump files) perform directory
renames without telling us exactly which files in that subdirectory
were moved. This makes it hard for a frontend to convert such data
formats to a fast-import stream, as all the frontend has on hand
is "Rename a/ to b/" with no details about what files are in a/,
unless the frontend also kept track of all files.
The new 'R' subcommand within a commit allows the frontend to
rename either a file or an entire subdirectory, without needing to
know the object's SHA-1 or the specific files contained within it.
The rename is performed as efficiently as possible internally,
making it cheaper than a 'D'/'M' pair for a file rename.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
After interruption, be that an edit, or a conflicting commit, reset
the variables VERBOSE, STRATEGY and PRESERVE_MERGES, so that the
user does not have to respecify them with "rebase --continue".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Non-interactive rebase requires the working tree to be clean, but
applies what is in the index without requiring the user to do it
herself. Imitate that, but (since we are interactive, after all)
fire up an editor with the commit message.
It also fixes a subtle bug: a forgotten "continue" was removed, which
led to an infinite loop when continuing without remaining patches.
Both issues noticed by Frank Lichtenheld.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As said here: http://www.gnupg.org/documentation/faqs.html#q6.19
the gpg version 1.0.6 didn't parse trust packets correctly, so for
that version, creation of signed tags using the generated key fails.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Acked-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio noticed that switching on autosetupmerge unilaterally started
cluttering the config for local branches. That is not the original
intention of branch.autosetupmerge, which was meant purely for
convenience when branching off of remote branches, but that semantics
got lost somewhere.
If you still want that "new" behavior, you can switch
branch.autosetupmerge to the value "all". Otherwise, it is interpreted
as a boolean, which triggers setting up defaults _only_ when branching
off of a remote branch, i.e. the originally intended behavior.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code shuffling mistakenly lost binariness specified with the
attribute mecahnism and made it always guess from the data.
Noticed by Johannes, with two test cases to t4020.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply" used to take check the whitespace in the wrong
direction.
Noticed by Daniel Barkalow.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This updates the hunk header customization syntax. The special
case 'funcname' attribute is gone.
You assign the name of the type of contents to path's "diff"
attribute as a string value in .gitattributes like this:
*.java diff=java
*.perl diff=perl
*.doc diff=doc
If you supply "diff.<name>.funcname" variable via the
configuration mechanism (e.g. in $HOME/.gitconfig), the value is
used as the regexp set to find the line to use for the hunk
header (the variable is called "funcname" because such a line
typically is the one that has the name of the function in
programming language source text).
If there is no such configuration, built-in default is used, if
any. Currently there are two default patterns: default and java.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, "git rerere" was enabled by creating the directory
.git/rr-cache. That is definitely not in line with most other
features, which are enabled by a config variable.
So, check the config variable "rerere.enabled". If it is set
to "false" explicitely, do not activate rerere, even if
.git/rr-cache exists. This should help when you want to disable
rerere temporarily.
If "rerere.enabled" is not set at all, fall back to detection
of the directory .git/rr-cache.
[jc: with minimum tweaks]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When given this subcommand, git-stash will try to merge the stashed
index into the current one. Only trivial merges are possible, since
we have no index for the index ;-) If a trivial merge is not possible,
git-stash will bail out with a hint to skip the --index option.
For good measure, finally include a test case.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes"diff -p" hunk headers customizable via gitattributes mechanism.
It is based on Johannes's earlier patch that allowed to define a single
regexp to be used for everything.
The mechanism to arrive at the regexp that is used to define hunk header
is the same as other use of gitattributes. You assign an attribute, funcname
(because "diff -p" typically uses the name of the function the patch is about
as the hunk header), a simple string value. This can be one of the names of
built-in pattern (currently, "java" is defined) or a custom pattern name, to
be looked up from the configuration file.
(in .gitattributes)
*.java funcname=java
*.perl funcname=perl
(in .git/config)
[funcname]
java = ... # ugly and complicated regexp to override the built-in one.
perl = ... # another ugly and complicated regexp to define a new one.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common mistake is to provide a filter which fails unwantedly. For
example, this will stop in the middle:
git filter-branch --env-filter '
test $GIT_COMMITTER_EMAIL = xyz &&
export GIT_COMMITTER_EMAIL = abc' rewritten
When $GIT_COMMITTER_EMAIL is not "xyz", the test fails, and consequently
the whole filter has a non-zero exit status. However, as demonstrated
in this example, filter-branch would just stop, and the user would be
none the wiser.
Also, a failing msg-filter would not have been caught, as was the
case with one of the tests.
This patch fixes both issues, by paying attention to the exit status
of msg-filter, and by saying what failed before exiting.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consider this history:
o--o-...-B <- origin
\ \
x--x--M--x--x <- master
In this situation, rebase considers master fully up-to-date and would
not do anything. However, if there were additional commits on origin,
the rebase would run and move the commits x on top of origin.
Here we change rebase to short-circuit out only if the history since origin
is strictly linear. Consequently, the above as well as a history like this
would be linearized:
o--o <- origin
\
x--x
\ \
x--M--x--x <- master
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise the hooks will be executed on cygwin and the test will fail
because of the contributed hooks.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Document -<n> for git-format-patch
glossary: add 'reflog'
diff --no-index: fix --name-status with added files
Don't smash stack when $GIT_ALTERNATE_OBJECT_DIRECTORIES is too long
In the man page, there is an example which describes how to remove
single commits (although it keeps the changes which were not reverted
in the next non-removed commit). Better make sure that it works as
expected.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this patch, an added file would be reported as /dev/null.
Noticed by David Kastrup.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this option, dangling objects are not only reported, but also
written to .git/lost-found/commit/ or .git/lost-found/other/. This
option implies '--full' and '--no-reflogs'.
'git fsck --lost-found' is meant as a replacement for git-lost-found.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change lets you use the format.subjectprefix config option to override the
default subject prefix.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 2031427167 git add was fixed if unmerged
entries are in the index and core.filemode=false. core.symlinks=false is
a similar case, which touches the same code path. Here is a test that
makes sure that the symlink property in the index is preserved, too.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/rebase:
Teach rebase -i about --preserve-merges
rebase -i: provide reasonable reflog for the rebased branch
rebase -i: several cleanups
ignore git-rebase--interactive
Teach rebase an interactive mode
Move the pick_author code to git-sh-setup
* jc/diffcore:
diffcore-delta.c: Ignore CR in CRLF for text files
diffcore-delta.c: update the comment on the algorithm.
diffcore_filespec: add is_binary
diffcore_count_changes: pass diffcore_filespec
When wc outputs whitespace, the test "$(command | wc -l)" = 1 is
broken because " 1" != "1". Let the shell eat the whitespace by
using test 1 = $(command | wc -l) instead.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a merge left unmerged entries, git add failed to pick up the
file mode from the index, when core.filemode == 0. If more than one
unmerged entry is there, the order of stage preference is 2, 1, 3.
Noticed by Johannes Sixt.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This avoids warning messages from gpg while verifying the tags; without it,
the program complains that the key is not certified with a trusted signature.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ei/worktree+filter:
filter-branch: always export GIT_DIR if it is set
setup_git_directory: fix segfault if repository is found in cwd
test GIT_WORK_TREE
extend rev-parse test for --is-inside-work-tree
Use new semantics of is_bare/inside_git_dir/inside_work_tree
introduce GIT_WORK_TREE to specify the work tree
test git rev-parse
rev-parse: introduce --is-bare-repository
rev-parse: document --is-inside-git-dir
This ignores CR byte in CRLF sequence in text file when
computing similarity of two blobs.
Usually this should not matter as nobody sane would be checking
in a file with CRLF line endings to the repository (they would
use autocrlf so that the repository copy would have LF line
endings).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It fixes the test on system where ActiveState Perl is used.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests are useful to develop the C version for git-tag.sh,
ensuring that the future builtin-tag.c will not break previous
behaviour.
The tests are focused on listing, verifying, deleting and creating
tags, checking always that the correct status value is returned
and everything remains as expected.
In order to verify and create signed tags, a PGP key was also
added, being created this way: gpg --homedir t/t7004 --gen-key
Type DSA and Elgamal, size 2048 bits, no expiration date.
Name and email: C O Mitter <committer@example.com>
No password given, to enable non-interactive operation.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests check some features that git-stripspace already has
and those that it should manage well: Removing trailing spaces
from lines, removing blank lines at the beginning and end,
unifying multiple lines between paragraphs, doing the correct
when there is no newline at the last line, etc.
It seems that the implementation needs to save the whole line
in memory to be able to manage correctly long lines with
text and spaces conveniently distribuited on them.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use \n as delimiter between key and value and \0 as
delimiter after each key/value pair. This should be
easily parsable output.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option "-p" (or long "--preserve-merges") makes it possible to
rebase side branches including merges, without straightening the
history.
Example:
X
\
A---M---B
/
---o---O---P---Q
When the current HEAD is "B", "git rebase -i -p --onto Q O" will yield
X
\
---o---O---P---Q---A'---M'---B'
Note that this will
- _not_ touch X [*1*], it does
- _not_ work without the --interactive flag [*2*], it does
- _not_ guess the type of the merge, but blindly uses recursive or
whatever strategy you provided with "-s <strategy>" for all merges it
has to redo, and it does
- _not_ make use of the original merge commit via git-rerere.
*1*: only commits which reach a merge base between <upstream> and HEAD
are reapplied. The others are kept as-are.
*2*: git-rebase without --interactive is inherently patch based (at
least at the moment), and therefore merges cannot be preserved.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If your rebase succeeded, the HEAD's reflog will still show the whole
mess, but "<branchname>@{1}" now shows the state _before_ the rebase,
so that you can reset (or compare) the original and the rebased
revisions more easily.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support "--verbose" in addition to "-v", show short names in the list
comment, clean up if there is nothing to do, and add several "test_ticks"
in the test script.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Print no space after the name of a key without value.
Otherwise keys without values are printed exactly the
same as keys with empty values.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a picture, and keep the setup and the tests together.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't you just hate the fact sometimes, that git-rebase just applies
the patches, without any possibility to edit them, or rearrange them?
With "--interactive", git-rebase now lets you edit the list of patches,
so that you can reorder, edit and delete patches.
Such a list will typically look like this:
pick deadbee The oneline of this commit
pick fa1afe1 The oneline of the next commit
...
By replacing the command "pick" with the command "edit", you can amend
that patch and/or its commit message, and by replacing it with "squash"
you can tell rebase to fold that patch into the patch before that.
It is derived from the script sent to the list in
<Pine.LNX.4.63.0702252156190.22628@wbgn013.biozentrum.uni-wuerzburg.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We always quote "unusual" byte values in a pathname using
C-string style, to make it safer for parsing scripts that do not
handle NUL separated records well (or just too lazy to bother).
The absolute minimum bytes that need to be quoted for this
purpose are TAB, LF (and other control characters), double quote
and backslash.
However, we have also always quoted the bytes in high 8-bit
range; this was partly because we were lazy and partly because
we were being cautious.
This introduces an internal "quote_path_fully" variable, and
core.quotepath configuration variable to control it. When set
to false, it does not quote bytes in high 8-bit range anymore
but passes them intact.
The variable defaults to "true" to retain the traditional
behaviour for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb calls Encode::decode_utf8 with two arguments,
but old versions of perl only allow this function to be called
with one argument. Even older versions of perl do not even
have an Encode module.
Signed-off-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is based on Jeff King's example in
20070621130137.GB4487@coredump.intra.peff.net
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/filter:
filter-branch: subdirectory filter needs --full-history
filter-branch: Simplify parent computation.
Teach filter-branch about subdirectory filtering
filter-branch: also don't fail in map() if a commit cannot be mapped
filter-branch: Use rev-list arguments to specify revision ranges.
filter-branch: fix behaviour of '-k'
filter-branch: use $(($i+1)) instead of $((i+1))
chmod +x git-filter-branch.sh
filter-branch: prevent filters from reading from stdin
t7003: make test repeatable
Add git-filter-branch
When there are several candidates for a rename source, and one of them
has an identical basename to the rename target, take that one.
Noticed by Govind Salinas, posted by Shawn O. Pearce, partial patch
by Linus Torvalds.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Frank Lichtenheld, Fri, Jun 15, 2007 03:01:53 +0200:
> +test_expect_failure 'req_Root failure (export-all w/o whitelist)' \
> + 'cat request-anonymous | git-cvsserver --export-all pserver >log 2>&1
> + || false'
This does not work, at least for bash in current Ubuntu:
GNU bash, version 3.2.13(1)-release
You have to put "||" on the previous line:
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/remote:
git-push: Update description of refspecs and add examples
remote.c: "git-push frotz" should update what matches at the source.
remote.c: fix "git push" weak match disambiguation
remote.c: minor clean-up of match_explicit()
remote.c: refactor creation of new dst ref
remote.c: refactor match_explicit_refs()
* fl/cvsserver:
cvsserver: Actually implement --export-all
cvsserver: Let --base-path and pserver get along just fine
cvsserver: Add some useful commandline options
* lh/submodule:
gitmodules(5): remove leading period from synopsis
Add gitmodules(5)
git-submodule: give submodules proper names
Rename sections from "module" to "submodule" in .gitmodules
git-submodule: remember to checkout after clone
t7400: barf if git-submodule removes or replaces a file
The original code did not take hierarchical branch names into account at all.
[jc: cherry-picked 11f68d9 from 'master']
Tested-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[jc: cherry-picked 9f30855 from 'master']
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Embarrassing bug number two in my options patch.
Also enforce that --export-all is only ever used together with an
explicit whitelist. Otherwise people might export every git repository
on the whole system without realising.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Embarassing bug number one in my options patch.
Since the code for --base-path support rewrote
the cvsroot value after comparing it with a possible
existing value (i.e. from pserver authentication)
the check always failed.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
dcommit will still rewrite the HEAD commit and the history of the first
parents of each HEAD~1, HEAD~2, HEAD~3 as it always has.
However, any merge parents (HEAD^2, HEAD^^2, HEAD~2^2) will now be
preserved when the new HEAD and HEAD~[0-9]+ commits are rewritten to SVN
with dcommit. Commits written to SVN will still not have any merge
information besides anything in the commit message.
Thanks to Joakim Tjernlund, Junio C Hamano and Steven Grimm
for explanations, feedback, examples and test case.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As reported by Matthieu Moy, this is causing svnserve to
terminate connections, because it segfaults.
This test is disabled by default and can be enabled by setting
SVNSERVE_PORT to an unbound (for 127.0.0.1) TCP port in the
environment (in addition to SVN_TESTS=1). I'm not comfortable
with having a test start a daemon by default and take up a port
that could potentially stay running if the test failed.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the way git-submodule uses .gitmodules: Subsections no longer
specify the submodule path, they now specify the submodule name. The
submodule path is found under the new key "submodule.<name>.path", which is
a required key.
With this change a submodule can be moved between different 'checkout paths'
without upsetting git-submodule.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename [module] to [submodule], so that it would be more
forward compatible with the proposed extension by harmonizing
the section names used in .gitmodules and .git/config.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test for an unmolested file wouldn't fail properly if the file had been
removed or replaced by something other than a regular file. This fixes it.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When two branches are merged that modify a subdirectory (possibly in
different intermediate steps) such that both end up identical, then
rev-list chooses only one branch. But when we filter history, we want to
keep both branches. Therefore, we must use --full-history.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With git-filter-branch --subdirectory-filter <subdirectory> you can
get at the history, as seen by a certain subdirectory. The history
of the rewritten branch will only contain commits that touched that
subdirectory, and the subdirectory will be rewritten to be the new
project root.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, when the local repository has a branch "frotz" and the
remote repository has a tag "frotz" (but not branch "frotz"),
"git-push frotz" mistakenly updated the tag at the remote side.
This was because the partial refname matching code was applied
independently on both source and destination side.
With this fix, when a colon-less refspec is given to git-push,
we first match it with the refs in the source repository, and
update the matching ref in the destination repository.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git push A:B" is given, and A (or B) is not a full refname
that begins with refs/, we require an unambiguous match with an
existing ref. For this purpose, a match with a local branch or
a tag (i.e. refs/heads/A and refs/tags/A) is called a "strong
match", and any other match is called a "weak match". A partial
refname is unambiguous when there is only one strong match with
any number of weak matches, or when there is only one weak match
and no other match.
However, as reported by Sparse with Ramsay Jones recently,
count_refspec_match() function had a bug where a variable in an
inner block masked a different variable of the same name, which
caused the weak matches to be ignored.
This fixes it, and adds tests for the fix.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
unzip -v on (at least) Ubuntu prints a screenful of version info
to stdout. Get rid of it since we only want to know if unzip is
installed or not.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Make git-cvsserver understand some options inspired by
git-daemon, namely --base-path, --export-all, --strict-paths.
Also allow the caller to specify a whitelist of allowed
directories, again similar to git-daemon.
While already adding option parsing also support the common
--help and --version options.
Rationale:
While the gitcvs.enabled configuration option already
offers means to limit git-cvsserver access to a repository,
there are some use cases where other methods of access
control prove to be more useful.
E.g. if setting up a pserver for a collection of public
repositories one might want limit the exported repositories
to exactly the directory this collection is located whithout
having to worry about other repositories that might lie around
with the configuration variable set (never trust your users ;)
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The path submitted with the Root request has to be absolute
(cvs does it this way and it may save us some sanity checks
later)
If multiple roots are specified (e.g. because we use
pserver authentication which will already include the
root), ensure that they say all the same.
Probably neither is a security risk, and neither should ever
be triggered by a sane client, but when validating
input data, it's better to be save than sorry.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although it is not advisable, we have always allowed a branch
and a tag to have the same basename (i.e. it is not illegal to
have refs/heads/frotz and refs/tags/frotz at the same time).
When talking about a specific commit, the interpretation of
'frotz' has always been "use tag and then check branch",
although we warn when ambiguities exist.
However "git checkout $name" is defined to (1) first see if it
matches the branch name, and if so switch to that branch; (2)
otherwise it is an instruction to detach HEAD to point at the
commit named by $name. We did not follow this definition when
$name appeared under both refs/heads/ and refs/tags/ -- we
switched to the branch but read the tree from the tagged commit,
which was utterly bogus.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The problem is visible when cloning a local repo. The cloned
repository will have the origin url setup incorrectly: the origin name
will be copied verbatim in origin url of the cloned repository.
Normally, the name is to be expanded into absolute path.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/filter:
filter-branch: also don't fail in map() if a commit cannot be mapped
filter-branch: Use rev-list arguments to specify revision ranges.
filter-branch: fix behaviour of '-k'
filter-branch: use $(($i+1)) instead of $((i+1))
chmod +x git-filter-branch.sh
filter-branch: prevent filters from reading from stdin
t7003: make test repeatable
Add git-filter-branch
setup_gdg is used as abbreviation for setup_git_directory_gently.
The work tree can be specified using the environment variable
GIT_WORK_TREE and the config option core.worktree (the environment
variable has precendence over the config option). Additionally
there is a command line option --work-tree which sets the
environment variable.
setup_gdg does the following now:
GIT_DIR unspecified
repository in .git directory
parent directory of the .git directory is used as work tree,
GIT_WORK_TREE is ignored
GIT_DIR unspecified
repository in cwd
GIT_DIR is set to cwd
see the cases with GIT_DIR specified what happens next and
also see the note below
GIT_DIR specified
GIT_WORK_TREE/core.worktree unspecified
cwd is used as work tree
GIT_DIR specified
GIT_WORK_TREE/core.worktree specified
the specified work tree is used
Note on the case where GIT_DIR is unspecified and repository is in cwd:
GIT_WORK_TREE is used but is_inside_git_dir is always true.
I did it this way because setup_gdg might be called multiple
times (e.g. when doing alias expansion) and in successive calls
setup_gdg should do the same thing every time.
Meaning of is_bare/is_inside_work_tree/is_inside_git_dir:
(1) is_bare_repository
A repository is bare if core.bare is true or core.bare is
unspecified and the name suggests it is bare (directory not
named .git). The bare option disables a few protective
checks which are useful with a working tree. Currently
this changes if a repository is bare:
updates of HEAD are allowed
git gc packs the refs
the reflog is disabled by default
(2) is_inside_work_tree
True if the cwd is inside the associated working tree (if there
is one), false otherwise.
(3) is_inside_git_dir
True if the cwd is inside the git directory, false otherwise.
Before this patch is_inside_git_dir was always true for bare
repositories.
When setup_gdg finds a repository git_config(git_default_config) is
always called. This ensure that is_bare_repository makes use of
core.bare and does not guess even though core.bare is specified.
inside_work_tree and inside_git_dir are set if setup_gdg finds a
repository. The is_inside_work_tree and is_inside_git_dir functions
will die if they are called before a successful call to setup_gdg.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subset of commits in a branch used to be specified by options (-k, -r)
as well as the branch tip itself (-s). It is more natural (for git users)
to specify revision ranges like 'master..next' instead. This makes it so.
If no range is specified it defaults to 'HEAD'.
As a consequence, the new name of the filtered branch must be the first
non-option argument. All remaining arguments are passed to 'git rev-list'
unmodified.
The tip of the branch that gets filtered is implied: It is the first
commit that git rev-list would print for the specified range.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option '-k' says that the given commit and _all_ of its ancestors
are kept as-is.
However, if a to-be-rewritten commit branched from an ancestor of an
ancestor of a commit given with '-k', filter-branch would fail.
Example:
A - B
\
C
If filter-branch was called with '-k B -s C', it would actually keep
B (and A as its parent), but would rewrite C, and its parent.
Noticed by Johannes Sixt.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
