Mark those remaining tests that pass when run under SANITIZE=leak with
TEST_PASSES_SANITIZE_LEAK=true, these were either omitted in
f346fcb62a (Merge branch 'ab/mark-leak-free-tests-even-more',
2021-12-15) and 5a4f8381b6 (Merge branch 'ab/mark-leak-free-tests',
2021-10-25), or have had their memory leaks fixed since then.
With this change there's now a a one-to-one mapping between those
tests that we have opted-in via "TEST_PASSES_SANITIZE_LEAK=true", and
those that pass with the new "check" mode:
GIT_TEST_PASSING_SANITIZE_LEAK=check \
GIT_TEST_SANITIZE_LEAK_LOG=true \
make test SANITIZE=leak
Note that the "GIT_TEST_SANITIZE_LEAK_LOG=true" is needed due to the
edge cases noted in a preceding commit, i.e. in some cases we'd pass
the test itself, but still have outstanding leaks due to ignored exit
codes.
The "GIT_TEST_SANITIZE_LEAK_LOG=true" corrects for that, we're only
marking those tests as passing that really don't have any leaks,
whether that was reflected in their exit code or not.
Note that the change here to "t9100-git-svn-basic.sh" is marking that
test as passing under SANITIZE=leak, we're removing a
"TEST_FAILS_SANITIZE_LEAK=true" line, not
"TEST_PASSES_SANITIZE_LEAK=true". See 7a98d9ab00 (revisions API: have
release_revisions() release "cmdline", 2022-04-13) for the
introduction of that t/lib-git-svn.sh-specific variable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 2a0cafd464,
as it expects a working "a ref deletion must produce a single
transaction, not one for loose and another for packed" topic,
which we do not have.
Add a "test_hook" wrapper similar to the existing "test_config"
wrapper added in d960c47a88 (test-lib: add helper functions for
config, 2011-08-17).
This wrapper:
- Will clean up the hook with "test_when_finished", unless --setup is
provided.
- Will error if we clobber a hook, unless --clobber is provided.
- Takes a name like "update" instead of ".git/hooks/update".
- Accepts -C <dir>, like "test_config" and "test_commit".
By using a wrapper we'll be able to easily change all the hook-related
code that assumes that the template-created ".git/hooks" directory is
created by "init", "clone" etc. once another topic follows-up and
changes the test suite to stop creating trash directories using those
templates.
In addition this will make it easy to have the hooks configured using
the "configuration-based hooks" topic, once we get around to
integrating that. I.e. we'll be able to run the tests in a mode where
we sometimes create a .git/hooks/<name>, and other times create a
script in another location, and point the relevant configuration
snippet to it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the testcase to exercise backfilling of tags for fetches we evoke a
failure of the backfilling mechanism by creating a reference that later
on causes a D/F conflict. Because the assumption was that git-fetch(1)
would notice the D/F conflict early on this conflicting reference was
created via the reference-transaction hook just when we were about to
write the backfilled tag. As it turns out though this is not the case,
and the fetch fails in the same way when we create the conflicting ref
up front.
Simplify the test setup creating the reference up front, which allows us
to get rid of the hook script.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching references from a remote we by default also fetch all tags
which point into the history we have fetched. This is a separate step
performed after updating local references because it requires us to walk
over the history on the client-side to determine whether the remote has
announced any tags which point to one of the fetched commits.
This backfilling of tags isn't covered by the `--atomic` flag: right
now, it only applies to the step where we update our local references.
This is an oversight at the time the flag was introduced: its purpose is
to either update all references or none, but right now we happily update
local references even in the case where backfilling failed.
Fix this by pulling up creation of the reference transaction such that
we can pass the same transaction to both the code which updates local
references and to the code which backfills tags. This allows us to only
commit the transaction in case both actions succeed.
Note that we also have to start passing the transaction into
`find_non_local_tags()`: this function is responsible for finding all
tags which we need to backfill. Right now, it will happily return tags
which have already been updated with our local references. But when we
use a single transaction for both local references and backfilling then
it may happen that we try to queue the same reference update twice to
the transaction, which consequently triggers a bug. We thus have to skip
over any tags which have already been queued.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the backfilling of tags fails we do not report this error to the
caller, but only report it implicitly at a later point when reporting
updated references. This leaves callers unable to act upon the
information of whether the backfilling succeeded or not.
Refactor the function to return an error code and pass it up the
callstack. This causes us to correctly propagate the error back to the
user of git-fetch(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using git-fetch(1) with the `--atomic` flag the expectation is that
either all of the references are updated, or alternatively none are in
case the fetch fails. While we already have tests for this, we do not
have any tests which exercise atomicity either when pruning deleted refs
or when backfilling tags. This gap in test coverage hides that we indeed
don't handle atomicity correctly for both of these cases.
Add test cases which cover these testing gaps to demonstrate the broken
behaviour. Note that tests are not marked as `test_expect_failure`: this
is done to explicitly demonstrate the current known-wrong behaviour, and
they will be fixed up as soon as we fix the underlying bugs.
While at it this commit also adds another test case which demonstrates
that backfilling of tags does not return an error code in case the
backfill fails. This bug will also be fixed by a subsequent commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t550*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an upcoming commit, we will use `main` as the default branch name in
t5503 instead of `master`. This will require extra padding in ASCII-art
commit graphs, which we hereby add preemptively.
By doing this preemptively rather than after the commit applying the
search-and-replace, it is more obvious that we caught all aligned
comments that are affected by the latter commit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to extract the wants from a trace, a loop in t5503 currently
breaks if "0000" is found. This works for protocol v0 and v1, but not
v2. Instead, teach t5503 to look specifically for the "want" string,
which is compatible with all protocols.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many tests have an initial setup step that might fail based
on whether earlier tests in the script have succeeded or
not. Using a trick like "|| true" breaks the &&-chain,
missing earlier failures (and fooling --chain-lint).
We can use test_might_fail in some cases, which is correct
and makes the intent more obvious. We can also use
test_unconfig for unsetting config (and which is more
robust, as well).
The case in t9500 is an oddball. It wants to run cmd1 _or_
cmd2, and does it like:
cmd1 || cmd2 &&
other_stuff
It's not wrong in this case, but it's a bad habit to get
into, because it breaks the &&-chain if used anywhere except
at the beginning of the test (and we use the correct
solution here, putting it inside a block for precedence).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some test scripts use the GIT_TRACE mechanism to dump
debugging information to descriptor 3 (and point it to a
file using the shell). On Windows, however, bash is unable
to set up descriptor 3. We do not write our trace to the
file, and worse, we may interfere with other operations
happening on descriptor 3, causing tests to fail or even
behave inconsistently.
Prior to commit 97a83fa (upload-pack: remove packet debugging
harness), these tests used GIT_DEBUG_SEND_PACK, which only
supported output to a descriptor. The tests in t5503 were
always broken on Windows, and were marked to be skipped via
the NOT_MINGW prerequisite. In t5700, the tests used to pass
prior to 97a83fa, but only because they were not careful
enough; because we only grepped the trace file, an empty
file looked successful to us. But post-97a83fa, the writing
to descriptor 3 causes "git fetch" to hang (presumably
because we are throwing random bytes into the middle of the
protocol).
Now that we are using the GIT_TRACE mechanism, we can
improve both scripts by asking git to write directly to a
file rather than a descriptor. That fixes the hang in t5700,
and should allow t5503 to successfully run on Windows.
In both cases we now also use "test -s" to double-check that
our trace file actually contains output, which should reduce
the possibility of an erroneously passing test.
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you set the GIT_DEBUG_SEND_PACK environment variable,
upload-pack will dump lines it receives in the receive_needs
phase to a descriptor. This debugging harness is a strict
subset of what GIT_TRACE_PACKET can do. Let's just drop it
in favor of that.
A few tests used GIT_DEBUG_SEND_PACK to confirm which
objects get sent; we have to adapt them to the new output
format.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Same rules as before: this patch only adds " &&" to the end of
some lines in the test suite.
Intended to be applied on top of or squashed with the last
batch if they look okay.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two tests fail on msysGit because /dev/null is an alias for nul on
Windows and when reading the value back from git config the alias does
not match the real filename. Also the HOME environment variable has a
unix-style path but git returns a native equivalent path for '~'. As
these are platform-dependent equivalent results it seems simplest to
skip the test entirely.
Moves the NOT_MINGW prereq from t5503 into the test library.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Change this test to skip test with test prerequisites, and to do setup
work in tests. This improves the skipped statistics on platforms where
the test isn't run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SKIP messages are now part of the TAP plan. A TAP harness now knows
why a particular test was skipped and can report that information. The
non-TAP harness built into Git's test-lib did nothing special with
these messages, and is unaffected by these changes.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test opens fd 3 and instructs git-upload-pack (via GIT_DEBUG_SEND_PACK)
to log information to that channel.
The way in which new processes are spawned by git on MinGW does not inherit
all file descriptors to the child processes, but only 0, 1, and 2.
The tests in t5503 require that file descriptor 3 is inherited from
git-fetch to git-upload-pack.
A complete implementation is non-trivial and not warranted just to satisfy
this test. Note that the incompleteness applies only to the executables
that use compat/mingw.c; bash and perl (the other important executables
used by git) are complete, of course.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
As a general principle, we should not use "git diff" to validate the
results of what git command that is being tested has done. We would not
know if we are testing the command in question, or locating a bug in the
cute hack of "git diff --no-index".
Rather use test_cmp for that purpose.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the remote peer upload-pack process supports the include-tag
protocol extension then we can avoid running a second fetch cycle
on the client side by letting the server send us the annotated tags
along with the objects it is packing for us. In the following graph
we can now fetch both "tag1" and "tag2" on the same connection that
we fetched "master" from the remote when we only have L available
on the local side:
T - tag1 S - tag2
/ /
L - o ------ o ------ B
\ \
\ \
origin/master master
The objects for "tag1" are implicitly downloaded without our direct
knowledge. The existing "quickfetch" optimization within git-fetch
discovers that tag1 is complete after the first connection and does
not open a second connection.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the situation is the following on the remote and L is the common
base between both sides:
T - tag1 S - tag2
/ /
L - A - O - O - B
\ \
origin/master master
and we have decided to fetch "master" to acquire the range L..B we
can also nab tag S at the same time during the first connection,
as we can clearly see from the refs advertised by upload-pack that
S^{} = B and master = B.
Unfortunately we still cannot nab T at the same time as we are not
able to see that T^{} will also be in the range implied by L..B.
Such computations must be performed on the remote side (not yet
supported) or on the client side as post-processing (the current
behavior).
This optimization is an extension of the previous one in that it
helps on projects which tend to publish both a new commit and a
new tag, then lay idle for a while before publishing anything else.
Most followers are able to download both the new commit and the new
tag in one connection, rather than two. git.git tends to follow
such patterns with its roughly once-daily updates from Junio.
A protocol extension and additional server side logic would be
necessary to also ensure T is grabbed on the first connection.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
