We have a function to create a bunch of irrelevant packs to
measure the expense of reprepare_packed_git(). Let's make
that available to other perf scripts.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's make it clear how patches should flow into
contrib/git-jump. The normal Git maintainer does not
necessarily care about things in contrib/, and authors of
individual components should be the ones giving the final
review/ack for a patch. Ditto for bug reports, which are
likely to get more attention from the area expert.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the configuration option "jump.grepCmd" that allows to configure the
command that is used to search in grep mode. This allows the users of
git-jump to use ag(1) or ack(1) as search engines.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -4/-6 option should be passed through to 'git fetch' to be
consistent with the man page.
Signed-off-by: Wei Shuyu <wsy@dogben.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Non-empty lines before a function definition are most likely comments
for that function and thus relevant. Include them in function context.
Such a non-empty line might also belong to the preceding function if
there is no separating blank line. Stop extending the context upwards
also at the next function line to make sure only one extra function body
is shown at most.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Function context can be bigger than -A/-B/-C context. To find the
beginning of the combined context we search backwards. Currently we
check at each loop iteration what we're looking for and determine the
effective upper boundary based on that.
Simplify this a bit by setting the variable "from" to the lowest unshown
line number up front if we're looking for a function line and set it
back to the required -B/-C context line number when we find one. This
prepares the ground for the next patch; no functional change intended.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The check for function context (-W) together with user-defined function
line patterns reuses hello.c and pretends it's written in a language in
which function lines contain either "printf" or a trailing curly brace.
That's a bit obscure.
Make the test easier to read by adding a small PowerShell script, using
a simple, but meaningful expression, and separating out checks for
different aspects into dedicated tests instead of simply matching the
whole output byte for byte.
Also include a test for showing comments before function lines like git
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Non-empty lines before a function definition are most likely comments
for that function and thus relevant. Include them in function context.
Such a non-empty line might also belong to the preceeding function if
there is no separating blank line. Stop extending the context upwards
also at the next function line to make sure only one extra function body
is shown at most.
Original-patch-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a helper for checking if a given record is a function line. It
frees callers from having to deal with the buffer arguments of
match_func_rec().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When showing function context it would be helpful to show comments
immediately before declarations, as they are most likely relevant.
Add a test for that, but without specifying the choice of lines too
rigidly in the test---we may want to stop before and not include
"/*" in the future, for example.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is similar to ff1e72483 (tag: change default of `pager.tag` to
"on", 2017-08-02) and is safe now that we do not consider `pager.branch`
at all when we are not listing branches. This change will help with
listing many branches, but will not hurt users of `git branch
--edit-description` as it would have before the previous commit.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to de121ffe5 (tag: respect `pager.tag` in list-mode only,
2017-08-02), use the DELAY_PAGER_CONFIG-mechanism to only respect
`pager.branch` when we are listing branches.
We have two possibilities of generalizing what that earlier commit made
to `git tag`. One is to interpret, e.g., --set-upstream-to as "it does
not use an editor, so we should page". Another, the one taken by this
commit, is to say "it does not list, so let's not page". That is in line
with the approach of the series on `pager.tag` and in particular the
wording in Documentation/git-tag.txt, which this commit reuses for
git-branch.txt.
This fixes the failing test added in the previous commit. Also adapt the
test for whether `git branch --set-upstream-to` respects `pager.branch`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next couple of commits will change how `git branch` handles
`pager.branch`, similar to how de121ffe5 (tag: respect `pager.tag` in
list-mode only, 2017-08-02) and ff1e72483 (tag: change default of
`pager.tag` to "on", 2017-08-02) changed `git tag`.
Add tests in this area to make sure that we don't regress and so that
the upcoming commits can be made clearer by adapting the tests. Add some
tests for `--list` (implied), one for `--edit-description`, and one for
`--set-upstream-to` as a representative of "something other than the
first two".
In particular, use `test_expect_failure` to document that we currently
respect the pager-configuration with `--edit-description`. The current
behavior is buggy since the pager interferes with the editor and makes
the end result completely broken. See also b3ee740c8 (t7006: add tests
for how git tag paginates, 2017-08-02).
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
d9bd4cbb9c (config: flip return value of store_write_*()) made
write_section() follow the convention of write(2) to return -1 on error
and the number of written bytes on success. 3b48045c6c (Merge branch
'sd/branch-copy') changed it back to returning 0 on error and 1 on
success, but left its callers still checking for negative values.
Let write_section() follow the convention of write(2) again to meet the
expectations of its callers.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add --expiry-date as a data-type for config files when
'git config --get' is used. This will return any relative
or fixed dates from config files as timestamps.
This is useful for scripts (e.g. gc.reflogexpire) that work
with timestamps so that '2.weeks' can be converted to a format
acceptable by those scripts/functions.
Following the convention of git_config_pathname(), move
the helper function required for this feature from
builtin/reflog.c to builtin/config.c where other similar
functions exist (e.g. for --bool or --path), and match
the order of parameters with other functions (i.e. output
pointer as first parameter).
Signed-off-by: Haaris Mehmood <hsed@unimetic.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mboxrd format allows the use of embedded "From " lines in
commit messages without being misinterpreted by mailsplit
Reported-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some diff implementations don't report missing newlines at the end of
files. Applying such a patch can cause a newline character to be
added inadvertently. The option --inaccurate-eof of git apply can be
used to remove trailing newlines if needed.
apply_one_fragment() cuts it off from the buffers for preimage and
postimage. Before it does, it builds an array with the lengths of each
line for both. Make sure to update the length of the last line in
these line info structures as well to keep them consistent with their
respective buffer.
Without this fix the added test fails; git apply dies and reports:
fatal: BUG: caller miscounted postlen: asked 1, orig = 1, used = 2
That sanity check is only called if whitespace changes are ignored.
Reported-by: Mahmoud Al-Qudsi <mqudsi@neosmart.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 52d59cc645 (branch: add a --copy (-c) option to go with --move (-m),
2017-06-18), `git branch` learned a `--copy` option. Include it when
providing command completions.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it safer to normalize the line endings in a repository.
Files that had been commited with CRLF will be commited with LF.
The old way to normalize a repo was like this:
# Make sure that there are not untracked files
$ echo "* text=auto" >.gitattributes
$ git read-tree --empty
$ git add .
$ git commit -m "Introduce end-of-line normalization"
The user must make sure that there are no untracked files,
otherwise they would have been added and tracked from now on.
The new "add --renormalize" does not add untracked files:
$ echo "* text=auto" >.gitattributes
$ git add --renormalize .
$ git commit -m "Introduce end-of-line normalization"
Note that "git add --renormalize <pathspec>" is the short form for
"git add -u --renormalize <pathspec>".
While at it, document that the same renormalization may be needed,
whenever a clean filter is added or changed.
Helped-By: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support for the --set-upstream option was removed in 52668846ea
(builtin/branch: stop supporting the "--set-upstream" option,
2017-08-17), after a long deprecation period.
Remove the option from the command synopsis for consistency. Replace
another reference to it in the description of `--delete` with
`--set-upstream-to`.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the index cannot be locked in do_recursive_merge(), issue an
error message and go on to the error recovery codepath, instead of
dying. When the commit cannot be picked, it needs to be rescheduled
when performing an interactive rebase, but just dying there won't
allow that to happen, and when the user runs 'git rebase --continue'
rather than 'git rebase --abort', the commit gets silently dropped.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
As explained in commit 06f46f237 (avoid "write_in_full(fd, buf, len)
!= len" pattern, 2017–09–13) the return value of write_in_full() is
either -1 or the requested number of bytes. As such comparing the
return value to an unsigned value such as strbuf.len will fail to
catch errors. Change the code to use the preferred '< 0' check.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to cherry-pick a change that has lots of renames, it is
somewhat unsettling to wait a really long time without any feedback.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 0024a5492 (Fix the rename detection limit checking; 2007-09-14),
the renameLimit was clamped to 32767. This appears to have been to simply
avoid integer overflow in the following computation:
num_create * num_src <= rename_limit * rename_limit
although it also could be viewed as a hardcoded bound on the amount of CPU
time we're willing to allow users to tell git to spend on handling
renames. An upper bound may make sense, but unfortunately this upper
bound was neither communicated to the users, nor documented anywhere.
Although large limits can make things slow, we have users who would be
ecstatic to have a small five file change be correctly cherry picked even
if they have to manually specify a large limit and wait ten minutes for
the renames to be detected.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The possibility of setting merge.renameLimit beyond 2^16 raises the
possibility that the values passed to progress can exceed 2^32.
Use uint64_t, because it "ought to be enough for anybody". :-)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code for a newly added path assumed that the path was a normal file,
and thus checked for there being a directory still being in the way of
the file. Note that since unpack_trees() does path-in-the-way checks
already, the only way for there to be a directory in the way at this
point in the code, is if there is some kind of D/F conflict in the merge.
For a submodule addition on HEAD's side of history, the submodule would
have already been present. This means that we do expect there to be a
directory present but should not consider it to be "in the way"; instead,
it's the expected submodule. So, when there's a submodule addition from
HEAD's side, don't bother checking the working copy for a directory in
the way.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop (perhaps overly cautious) sanity check before using the index
read from the filesystem at runtime.
* bp/read-index-from-skip-verification:
read_index_from(): speed index loading by skipping verification of the entry order
The SubmittingPatches document has been converted to produce an
HTML version via AsciiDoc/Asciidoctor.
* bc/submitting-patches-in-asciidoc:
Documentation: convert SubmittingPatches to AsciiDoc
Documentation: enable compat-mode for Asciidoctor
"git bisect run" that did not specify any command to run used to go
ahead and treated all commits to be tested as 'good'. This has
been corrected by making the command error out.
* sb/bisect-run-empty:
bisect run: die if no command is given
Doc and message updates to teach users "bisect view" is a synonym
for "bisect visualize".
* rd/bisect-view-is-visualize:
bisect: mention "view" as an alternative to "visualize"
We used to add an empty alternate object database to the system
that does not help anything; it has been corrected.
* jk/info-alternates-fix:
link_alt_odb_entries: make empty input a noop
The remote-helper for talking to MediaWiki has been updated to
work with mediawiki namespaces.
* ab/mediawiki-namespace:
remote-mediawiki: show progress while fetching namespaces
remote-mediawiki: process namespaces in order
remote-mediawiki: support fetching from (Main) namespace
remote-mediawiki: skip virtual namespaces
remote-mediawiki: show known namespace choices on failure
remote-mediawiki: allow fetching namespaces with spaces
remote-mediawiki: add namespace support
The "--format=..." option "git for-each-ref" takes learned to show
the name of the 'remote' repository and the ref at the remote side
that is affected for 'upstream' and 'push' via "%(push:remotename)"
and friends.
* js/for-each-ref-remote-name-and-ref:
for-each-ref: test :remotename and :remoteref
for-each-ref: let upstream/push report the remote ref name
for-each-ref: let upstream/push optionally report the remote name
Parts of a test to drive the long-running content filter interface
has been split into its own module, hopefully to eventually become
reusable.
* cc/git-packet-pm:
Git/Packet.pm: extract parts of t0021/rot13-filter.pl for reuse
t0021/rot13-filter: add capability functions
t0021/rot13-filter: refactor checking final lf
t0021/rot13-filter: add packet_initialize()
t0021/rot13-filter: improve error message
t0021/rot13-filter: improve 'if .. elsif .. else' style
t0021/rot13-filter: refactor packet reading functions
t0021/rot13-filter: fix list comparison
"git rebase -i" recently started misbehaving when a submodule that
is configured with 'submodule.<name>.ignore' is dirty; this has
been corrected.
* bw/rebase-i-ignored-submodule-fix:
wt-status: actually ignore submodules when requested
Code clean-up in refs API implementation.
* mh/tidy-ref-update-flags:
refs: update some more docs to use "oid" rather than "sha1"
write_packed_entry(): take `object_id` arguments
refs: rename constant `REF_ISPRUNING` to `REF_IS_PRUNING`
refs: rename constant `REF_NODEREF` to `REF_NO_DEREF`
refs: tidy up and adjust visibility of the `ref_update` flags
ref_transaction_add_update(): remove a check
ref_transaction_update(): die on disallowed flags
prune_ref(): call `ref_transaction_add_update()` directly
files_transaction_prepare(): don't leak flags to packed transaction
Some error messages did not quote filenames shown in it, which have
been fixed.
* sr/wrapper-quote-filenames:
wrapper.c: consistently quote filenames in error messages
Leak fixes.
* ma/bisect-leakfix:
bisect: fix memory leak when returning best element
bisect: fix off-by-one error in `best_bisection_sorted()`
bisect: fix memory leak in `find_bisection()`
bisect: change calling-convention of `find_bisection()`
Code cleanup.
* rs/sequencer-rewrite-file-cleanup:
sequencer.c: check return value of close() in rewrite_file()
sequencer: use O_TRUNC to truncate files
sequencer: factor out rewrite_file()
Recent update to the refs infrastructure implementation started
rewriting packed-refs file more often than before; this has been
optimized again for most trivial cases.
* mh/avoid-rewriting-packed-refs:
files-backend: don't rewrite the `packed-refs` file unnecessarily
t1409: check that `packed-refs` is not rewritten unnecessarily
