If you remove a submodule, in order to keep the repository so that
"git checkout" to an older commit in the superproject history can
resurrect the submodule, the real repository will stay in $GIT_DIR
of the superproject. A later "git submodule add $path" to add a
different submodule at the same path will fail. Diagnose this case
a bit better, and if the user really wants to add an unrelated
submodule at the same path, give the "--name" option to give it a
place in $GIT_DIR of the superproject that does not conflict with
the original submodule.
* jl/submodule-add-by-name:
submodule add: Fail when .git/modules/<name> already exists unless forced
Teach "git submodule add" the --name option
"git rm submodule" cannot blindly remove a submodule directory as
its working tree may have local changes, and worse yet, it may even
have its repository embedded in it. Teach it some special cases
where it is safe to remove a submodule, specifically, when there is
no local changes in the submodule working tree, and its repository
is not embedded in its working tree but is elsewhere and uses the
gitfile mechanism to point at it.
* jl/submodule-rm:
submodule: teach rm to remove submodules unless they contain a git directory
A test in t7404-submodule-foreach purports to test that
the --cached flag is properly noticed by --recursive calls
to the foreach command as it descends into nested
submodules. However, the test really does not perform this
test since the change it looks for is in a top-level
submodule handled by the first invocation of the command.
To properly test for the flag being passed to recursive
invocations, the change must be buried deeper in the
hierarchy.
Move the change one level deeper so it properly verifies
the recursive machinery of the 'git submodule status'
command.
Signed-off-by: Phil Hord <hordp@cisco.com>
Signed-off-by: Jeff King <peff@peff.net>
This function was added in f103f95b11 in
the erroneous expectation that it would be used in the
reimplementation of longest_ancestor_length(). But it turned out to
be easier to use a function specialized for comparing path prefixes
(i.e., one that knows about slashes and root paths) than to prepare
the paths in such a way that a generic string prefix comparison
function can be used. So delete string_list_longest_prefix() and its
documentation and test cases.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Move the responsibility for normalizing prefixes from
longest_ancestor_length() to its callers. Use slightly different
normalizations at the two callers:
In setup_git_directory_gently_1(), use the old normalization, which
ignores paths that are not usable. In the next commit we will change
this caller to also resolve symlinks in the paths from
GIT_CEILING_DIRECTORIES as part of the normalization.
In "test-path-utils longest_ancestor_length", use the old
normalization, but die() if any paths are unusable. Also change t0060
to only pass normalized paths to the test program (no empty entries or
non-absolute paths, strip trailing slashes from the paths, and remove
tests that thereby become redundant).
The point of this change is to reduce the scope of the ancestor_length
tests in t0060 from testing normalization+longest_prefix to testing
only mostly longest_prefix. This is necessary because when
setup_git_directory_gently_1() starts resolving symlinks as part of
its normalization, it will not be reasonable to do the same in the
test suite, because that would make the test results depend on the
contents of the root directory of the filesystem on which the test is
run. HOWEVER: under Windows, bash mangles arguments that look like
absolute POSIX paths into DOS paths. So we have to retain the level
of normalization done by normalize_path_copy() to convert the
bash-mangled DOS paths (which contain backslashes) into paths that use
forward slashes.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
We currently just look at raw blob data when using "-S" to
pickaxe. This is mostly historical, as pickaxe predates the
textconv feature. If the user has bothered to define a
textconv filter, it is more likely that their search string will be
on the textconv output, as that is what they will see in the
diff (and we do not even provide a mechanism for them to
search for binary needles that contain NUL characters).
This patch teaches "-S" to use textconv, just as we
already do for "-G".
Signed-off-by: Jeff King <peff@peff.net>
If you use "-G" to grep a diff, we will apply a configured
textconv filter to the data before generating the diff.
However, if the diff is an addition or deletion, we do not
bother running the diff at all, and just look for the token
in the added (or removed) content. This works because we
know that the diff must contain every line of content.
However, while we used the textconv-derived buffers in the
regular diff, we accidentally passed the original unmodified
buffers to regexec when checking the added or removed
content. This could lead to an incorrect answer.
Worse, in some cases we might have a textconv buffer but no
original buffer (e.g., if we pulled the textconv data from
cache, or if we reused a working tree file when generating
it). In that case, we could actually feed NULL to regexec
and segfault.
Reported-by: Peter Oberndorfer <kumbayo84@arcor.de>
Signed-off-by: Jeff King <peff@peff.net>
t9200 defines $CVSROOT where cvs should init its repository
$CVSROOT is set to $PWD/cvsroot.
cvs init is supposed to create the repository inside $PWD/cvsroot/CVSROOT
"cvs init" (e.g. version 1.11.23) checks if the last element of the path is
"CVSROOT", and if a directory with e.g. $PWD/cvsroot/CVSROOT already exists.
For such a $CVSROOT cvs refuses to init a repository here:
"Cannot initialize repository under existing CVSROOT:
On a case insenstive file system cvsroot and CVSROOT are the same directories
and t9200 fails.
Solution: use $PWD/tmpcvsroot instead of cvsroot $PWD/cvsroot
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Sed on Mac OS X doesn't handle \s in a sed expressions so use a more
portable character set expression instead.
Signed-off-by: Ben Walton <bdwalton@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Recent nd/wildmatch series was the first to reveal this ancient bug
in the test scaffolding.
* jc/test-say-color-avoid-echo-escape:
test-lib: Fix say_color () not to interpret \a\b\c in the message
A GSoC project.
* fa/remote-svn:
Add a test script for remote-svn
remote-svn: add marks-file regeneration
Add a svnrdump-simulator replaying a dump file for testing
remote-svn: add incremental import
remote-svn: Activate import/export-marks for fast-import
Create a note for every imported commit containing svn metadata
vcs-svn: add fast_export_note to create notes
Allow reading svn dumps from files via file:// urls
remote-svn, vcs-svn: Enable fetching to private refs
When debug==1, start fast-import with "--stats" instead of "--quiet"
Add documentation for the 'bidi-import' capability of remote-helpers
Connect fast-import to the remote-helper via pipe, adding 'bidi-import' capability
Add argv_array_detach and argv_array_free_detached
Add svndump_init_fd to allow reading dumps from arbitrary FDs
Add git-remote-testsvn to Makefile
Implement a remote helper for svn in C
Teaches a new configuration variable to "git diff" Porcelain and
its friends.
* jm/diff-context-config:
t4055: avoid use of sed 'a' command
diff: diff.context configuration gives default to -U
The git-send-email always use RFC2047 subject quoting for
files with "broken" encoding - non-ASCII files without
Content-Transfer-Encoding, even for ASCII subjects. This is
harmless but unnecessarily ugly for people reading the raw
headers. This patch skips rfc2047 quoting when the subject
does not need it.
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Jeff King <peff@peff.net>
The commit "git-send-email: introduce compose-encoding" introduced
the compose-encoding option to specify the introduction email encoding
(--compose option), but the email Subject encoding was still hardcoded
to UTF-8.
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Jeff King <peff@peff.net>
If git-config is asked for a single value, it will complain
and exit with an error if it finds multiple instances of
that value. This is unlike the usual internal config
parsing, however, which will generally overwrite previous
values, leaving only the final one. For example:
[set a multivar]
$ git config user.email one@example.com
$ git config --add user.email two@example.com
[use the internal parser to fetch it]
$ git var GIT_AUTHOR_IDENT
Your Name <two@example.com> ...
[use git-config to fetch it]
$ git config user.email
one@example.com
error: More than one value for the key user.email: two@example.com
This overwriting behavior is critical for the regular
parser, which starts with the lowest-priority file (e.g.,
/etc/gitconfig) and proceeds to the highest-priority file
($GIT_DIR/config). Overwriting yields the highest priority
value at the end.
Git-config solves this problem by implementing its own
parsing. It goes from highest to lowest priorty, but does
not proceed to the next file if it has seen a value.
So in practice, this distinction never mattered much,
because it only triggered for values in the same file. And
there was not much point in doing that; the real value is in
overwriting values from lower-priority files.
However, this changed with the implementation of config
include files. Now we might see an include overriding a
value from the parent file, which is a sensible thing to do,
but git-config will flag as a duplication.
This patch drops the duplicate detection for git-config and
switches to a pure-overwrite model (for the single case;
--get-all can still be used if callers want to do something
more fancy).
As is shown by the modifications to the test suite, this is
a user-visible change in behavior. An alternative would be
to just change the include case, but this is much cleaner
for a few reasons:
1. If you change the include case, then to what? If you
just stop parsing includes after getting a value, then
you will get a _different_ answer than the regular
config parser (you'll get the first value instead of
the last value). So you'd want to implement overwrite
semantics anyway.
2. Even though it is a change in behavior for git-config,
it is bringing us in line with what the internal
parsers already do.
3. The file-order reimplementation is the only thing
keeping us from sharing more code with the internal
config parser, which will help keep differences to a
minimum.
Going under the assumption that the primary purpose of
git-config is to behave identically to how git's internal
parsing works, this change can be seen as a bug-fix.
Signed-off-by: Jeff King <peff@peff.net>
We check that we can "--get-all" a multi-valued variable,
but we do not actually confirm that the output is sensible.
Doing so reveals that it works fine, but this will help us
ensure we do not have regressions in the next few patches,
which will touch this area.
Signed-off-by: Jeff King <peff@peff.net>
This test checks that git-config fails for an ambiguous
"get", but we check the exact same thing 3 tests beforehand.
Signed-off-by: Jeff King <peff@peff.net>
The t1300 test script is quite old, and does not use our
modern techniques or styles. This patch updates it in the
following ways:
1. Use test_cmp instead of cmp (to make failures easier to
debug).
2. Use test_cmp instead of 'test $(command) = expected'.
This makes failures much easier to debug, and also
makes sure that $(command) exits appropriately.
3. Use test_must_fail (easier to read, and checks more
rigorously for signal death).
4. Write tests with the usual style of:
test_expect_success 'test name' '
test commands &&
...
'
rather than one-liners, or using backslash-continuation.
This is purely a style fixup.
There are still a few command happening outside of
test_expect invocations, but they are all innoccuous system
commands like "cat" and "cp". In an ideal world, each test
would be self sufficient and all commands would happen
inside test_expect, but it is not immediately obvious how
the grouping should work (some of the commands impact the
subsequent tests, and some of them are setting up and
modifying state that many tests depend on). This patch just
picks the low-hanging style fruit, and we can do more fixes
on top later.
Signed-off-by: Jeff King <peff@peff.net>
Teach symbolic-ref to delete symrefs by adding the -d/--delete option to
git-symbolic-ref. Both proper and dangling symrefs are deleted by this
option, but other refs - or anything else that is not a symref - is not.
The symref deletion is performed by first verifying that we are given a
proper symref, and then invoking delete_ref() on it with the REF_NODEREF
flag.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When deleting a ref through a symref (e.g. using 'git update-ref -d HEAD'
to delete refs/heads/master), we would remove the loose ref, but a packed
version of the same ref would remain, the end result being that instead of
deleting refs/heads/master we would appear to reset it to its state as of
the last repack.
This patch fixes the issue, by making sure we pass the correct ref name
when invoking repack_without_ref() from within delete_ref().
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When deleting a ref through a symref (e.g. using 'git update-ref -d HEAD'
to delete refs/heads/master), we currently fail to remove the packed
version of that ref. This testcase demonstrates the bug.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This saves us some code, but it also reduces the number of
processes we start for each filtered commit. Since we can
parse both author and committer in the same sed invocation,
we save one process. And since the new interface avoids tr,
we save 4 processes.
It also avoids using "tr", which has had some odd
portability problems reported with from Solaris's xpg6
version.
We also tweak one of the tests in t7003 to double-check that
we are properly exporting the variables (because test-lib.sh
exports GIT_AUTHOR_NAME, it will be automatically exported
in subprograms. We override this to make sure that
filter-branch handles it properly itself).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git branch reports the abbreviated hash of the head commit of
a deleted branch to make it easier for a user to undo the
operation. For symref branches this doesn't help. Print the
symref target instead for them.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before a branch is deleted, we check that it points to a valid
commit. With -d we also check that the commit is a merged; this
check is not done with -D.
The reason for that is that commits pointed to by branches should
never go missing; if they do then something broke and it's better
to stop instead of adding to the mess. And a non-merged commit
may contain changes that are worth preserving, so we require the
stronger option -D instead of -d to get rid of them.
If a branch consists of a symref, these concerns don't apply.
Deleting such a branch can't make a commit become unreferenced,
so we don't need to check if it is merged, or even if it is
actually a valid commit. Skip them in that case. This allows
us to delete dangling symref branches.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a branch that is to be deleted happens to be a symref to another
branch, the current code removes the targeted branch instead of the
one it was called for.
Change this surprising behaviour and delete the symref branch
instead.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-format-patch does currently not parse user supplied extra header
values (e. g., --cc, --add-header) and just replays them. That forces
users to add them RFC 2822/2047 conform in encoded form, e.g.
--cc '=?UTF-8?q?Jan=20H=2E=20Sch=C3=B6nherr?= <...>'
which is inconvenient. We would want to update git-format-patch to
accept human-readable input
--cc 'Jan H. Schönherr <...>'
and handle the encoding, wrapping and quoting internally in the future,
similar to what is already done in git-send-email. The necessary code
should mostly exist in the code paths that handle the From: and Subject:
headers.
Whether we want to do this only for the git-format-patch options
--to and --cc (and the corresponding config options) or also for
user supplied headers via --add-header, is open for discussion.
For now, add test_expect_failure tests for To: and Cc: headers as a
reminder and fix tests that would otherwise fail should this get
implemented.
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to RFC 2047 and RFC 822, rfc2047 encoded words and and rfc822
quoted strings do not mix. Since add_rfc2047() no longer leaves RFC 822
specials behind, the quoting is also no longer necessary to create a
standard-conforming mail.
Remove the quoting, when RFC 2047 encoding takes place. This actually
requires to refactor add_rfc2047() a bit, so that the different cases
can be distinguished.
With this patch, my own name gets correctly decoded as Jan H. Schönherr
(without quotes) and not as "Jan H. Schönherr" (with quotes).
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
RFC 2047 requires more characters to be encoded than it is currently done.
Especially, RFC 2047 distinguishes between allowed remaining characters
in encoded words in addresses (From, To, etc.) and other headers, such
as Subject.
Make add_rfc2047() and is_rfc2047_special() location dependent and include
all non-allowed characters to hopefully be RFC 2047 conformant.
This especially fixes a problem, where RFC 822 specials (e. g. ".") were
left unencoded in addresses, which was solved with a non-standard-conforming
workaround in the past (which is going to be removed in a follow-up patch).
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Encoded characters add more than one character at once to an encoded
header. Include all characters that are about to be added in the length
calculation for wrapping.
Additionally, RFC 2047 imposes a maximum line length of 76 characters
if that line contains an rfc2047 encoded word.
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not wrap the second and later lines of non-rfc2047-encoded headers
substantially before the 78 character limit.
Instead of passing the remaining length of the first line as wrapping
width, use the correct maximum length and tell strbuf_add_wrapped_bytes()
how many characters of the first line are already used.
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The wrapping logic in strbuf_add_wrapped_text() does currently not allow
lines that entirely fill the allowed width, instead it wraps the line one
character too early.
For example, the text "This is the sixth commit." formatted via
"%w(11,1,2)" (wrap at 11 characters, 1 char indent of first line, 2 char
indent of following lines) results in four lines: " This is", " the",
" sixth", " commit." This is wrong, because " the sixth" is exactly
11 characters long, and thus allowed.
Fix this by allowing the (width+1) character of a line to be a valid
wrapping point if it is a whitespace character.
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When inserting the note after the commit log message to format-patch
output, add three dashes before the note. Record the fact that we
did so in the rev_info and omit showing duplicated three dashes in
the usual codepath that is used when notes are not being shown.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When appending a new signature with "format-patch --signature", if
the "--notes" option is also in effect, the location of the new
signature (and if the signature should be added in the first place)
should be decided using the contents of the original commit log
message, before the message from the notes is added.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The behavior of "git diff --stat" is rather odd for files that have
zero lines of changes: it will discount them entirely unless they were
renames.
Which means that the stat output will simply not show files that only
had "other" changes: they were created or deleted, or their mode was
changed.
Now, those changes do show up in the summary, but so do renames, so
the diffstat logic is inconsistent. Why does it show renames with zero
lines changed, but not mode changes or added files with zero lines
changed?
So change the logic to not check for "is_renamed", but for
"is_interesting" instead, where "interesting" is judged to be any
action but a pure data change (because a pure data change with zero
data changed really isn't worth showing, if we ever get one in our
diffpairs).
So if you did
chmod +x Makefile
git diff --stat
before, it would show empty (" 0 files changed"), with this it shows
Makefile | 0
1 file changed, 0 insertions(+), 0 deletions(-)
which I think is a more correct diffstat (and then with "--summary" it
shows *what* the metadata change to Makefile was - this is completely
consistent with our handling of renamed files).
Side note: the old behavior was *really* odd. With no changes at all,
"git diff --stat" output was empty. With just a chmod, it said "0
files changed". No way is our legacy behavior sane.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/ll-merge-binary-ours:
ll-merge: warn about inability to merge binary files only when we can't
attr: "binary" attribute should choose built-in "binary" merge driver
merge: teach -Xours/-Xtheirs to binary ll-merge driver
CVS patchsets are imported with timestamps having an offset of +0000
(UTC). The cvs-authors file is already used to translate the CVS
username to full name and email in the corresponding commit. Extend
this file to support an optional timezone for calculating a user-
specific timestamp offset.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keep track of the whole CVS revision number in-process. This will
clarify code when we start handling non-linear revision numbers later.
There is one externally visible change: conflict markers after
an update will now include the full CVS revision number,
including the "1." prefix. It used to leave off the prefix.
Other than the conflict marker, this change doesn't effect
external functionality. No new features, and the DB schema
is unchanged such that it continues to store just
the stripped rev numbers (without prefix).
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'cvs log' output is arguably deficient in a number of ways
(see the comment added with the test), but add a test for
the current output to detect for accidental regressions.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
.gitattributes and .gitignore share the same pattern syntax but has
separate matching implementation. Over the years, ignore's
implementation accumulates more optimizations while attr's stays the
same.
This patch reuses the core matching functions that are also used by
excluded_from_list. excluded_from_list and path_matches can't be
merged due to differences in exclude and attr, for example:
* "!pattern" syntax is forbidden in .gitattributes. As an attribute
can be unset (i.e. set to a special value "false") or made back to
unspecified (i.e. not even set to "false"), "!pattern attr" is unclear
which one it means.
* we support attaching attributes to directories, but git-core
internally does not currently make use of attributes on
directories.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "namelen" becomes zero at this stage, we have matched the fixed
part, but whether it actually matches the pattern still depends on the
pattern in "exclude". As demonstrated in t3001, path "three/a.3"
exists and it matches the "three/a.3" part in pattern "three/a.3[abc]",
but that does not mean a true match.
Don't be too optimistic and let fnmatch() do the job.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep searches for .gitattributes using "name" field in struct
grep_source but that field is not real on-disk path name. For example,
"grep pattern rev" fills the field with "rev:path", and Git looks for
.gitattributes in the (non-existent but exploitable) path "rev:path"
instead of "path".
This patch passes real paths down to grep_source_load_driver() when:
- grep on work tree
- grep on the index
- grep a commit (or a tag if it points to a commit)
so that these cases look up .gitattributes at proper paths.
.gitattributes lookup is disabled in all other cases.
Initial-work-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running with color disabled (e.g. under prove to produce TAP
output), say_color() helper function is defined to use echo to show
the message. With a message that ends with "\c", echo is allowed to
interpret it as "Do not end the line with LF".
Use printf "%s\n" to emit the message literally.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test script uses "svn cp" to create a branch with an @-sign in
its name:
svn cp "pr ject/trunk" "pr ject/branches/not-a@{0}reflog"
That sets up for later tests that fetch the branch and check that git
svn mangles the refname appropriately.
Unfortunately, modern svn versions interpret path arguments with an
@-sign as an example of path@revision syntax (which pegs a path to a
particular revision) and truncate the path or error out with message
"svn: E205000: Syntax error parsing peg revision '{0}reflog'".
When using subversion 1.6.x, escaping the @ sign as %40 avoids trouble
(see 08fd28bb, 2010-07-08). Newer versions are stricter:
$ svn cp "$repo/pr ject/trunk" "$repo/pr ject/branches/not-a%40{reflog}"
svn: E205000: Syntax error parsing peg revision '%7B0%7Dreflog'
The recommended method for escaping a literal @ sign in a path passed
to subversion is to add an empty peg revision at the end of the path
("branches/not-a@{0}reflog@"). Do that.
Pre-1.6.12 versions of Subversion probably treat the trailing @ as
another literal @-sign (svn issue 3651). Luckily ever since
v1.8.0-rc0~155^2~7 (t9118: workaround inconsistency between SVN
versions, 2012-07-28) the test can survive that.
Tested with Debian Subversion 1.6.12dfsg-6 and 1.7.5-1 and r1395837
of Subversion trunk (1.8.x).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Tested-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The introduction email (--compose option) have encoding hardcoded to
UTF-8, but invoked editor may not use UTF-8 encoding.
The encoding used by patches can be changed by the "8bit-encoding"
option, but this option does not have effect on introduction email
and equivalent for introduction email is missing.
Added compose-encoding command line option and sendemail.composeencoding
configuration option specify encoding of introduction email.
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line option parser for "git log -F -E --grep='<ere>'"
did not flip the "fixed" bit, violating the general "last option
wins" principle among conflicting options.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests just want a bit-for-bit identical copy; they do not need
even -H (there is no symbolic link involved) nor -p (there is no
funny permission or ownership issues involved).
Just use "cp -R" instead.
Signed-off-by: Ben Walton <bdwalton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fsck test assumed too much on what kind of error it will
detect. The only important thing is the inconsistency is detected
as an error.
* jc/maint-t1450-fsck-order-fix:
t1450: the order the objects are checked is undefined
"git receive-pack" (the counterpart to "git push") did not give
progress output while processing objects it received to the puser
when run over the smart-http protocol.
* jk/receive-pack-unpack-error-to-pusher:
receive-pack: drop "n/a" on unpacker errors
receive-pack: send pack-processing stderr over sideband
receive-pack: redirect unpack-objects stdout to /dev/null
A repository created with "git clone --single" had its fetch
refspecs set up just like a clone without "--single", leading the
subsequent "git fetch" to slurp all the other branches, defeating
the whole point of specifying "only this branch".
* rt/maint-clone-single:
clone --single: limit the fetch refspec to fetched branch
Use svnrdump_sim.py to emulate svnrdump without an svn server.
Tests fetching, incremental fetching, fetching from file://,
and the regeneration of fast-import's marks file.
Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com>
Acked-by: David Michael Barr <b@rr-dav.id.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the {word,[...]} style of configuration for tags and branches,
it appears the intent is to only match whole path parts, since the words
in the {} pattern are meta-character quoted.
When the pattern word appears in the beginning or middle of the url,
it's matched completely, since the left side, pattern, and (non-empty)
right side are joined together with path separators.
However, when the pattern word appears at the end of the URL, the
right side is an empty pattern, and the resulting regex matches
more than just the specified pattern.
For example, if you specify something along the lines of
branches = branches/project/{release_1,release_2}
and your repository also contains "branches/project/release_1_2", you
will also get the release_1_2 branch. By restricting the match regex
with anchors, this is avoided.
Signed-off-by: Ammon Riley <ammon.riley@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This fixes `ambiguous redirect' error given by bash.
[ew: fix misspelled test name,
also eliminate space after ">>" to conform to guidelines]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This fixes a bug where git finds the incorrect merge parent. Consider a
repository with trunk, branch1 of trunk, and branch2 of branch1.
Without this change, git interprets a merge of branch2 into trunk as a
merge of branch1 into trunk.
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Reviewed-by: Sam Vilain <sam@vilain.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Consider the case where you have trunk, branch1 of trunk, and branch2 of
branch1. trunk is merged back into branch2, and then branch2 is
reintegrated into trunk. The merge of branch2 into trunk will have
svn:mergeinfo property references to both branch1 and branch2. When
git-svn fetches the commit that merges branch2 (check_cherry_pick),
it is necessary to eliminate the merged contents of branch1 as well as
branch2, or else the merge will be incorrectly ignored as a cherry-pick.
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Reviewed-by: Sam Vilain <sam@vilain.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Teach the commands from the "log" family the "--grep-reflog" option
to limit output by string that appears in the reflog entry when the
"--walk-reflogs" option is in effect.
* nd/grep-reflog:
revision: make --grep search in notes too if shown
log --grep-reflog: reject the option without -g
revision: add --grep-reflog to filter commits by reflog messages
grep: prepare for new header field filter
"gc --auto" notified the user that auto-packing has triggered even
under the "--quiet" option.
* tu/gc-auto-quiet:
silence git gc --auto --quiet output
When a tag T points at an object X that is of a type that is
different from what the tag records as, fsck should report it as an
error.
However, depending on the order X and T are checked individually,
the actual error message can be different. If X is checked first,
fsck remembers X's type and then when it checks T, it notices that T
records X as a wrong type (i.e. the complaint is about a broken tag
T). If T is checked first, on the other hand, fsck remembers that we
need to verify X is of the type tag records, and when it later
checks X, it notices that X is of a wrong type (i.e. the complaint
is about a broken object X).
The important thing is that fsck notices such an error and diagnoses
the issue on object X, but the test was expecting that we happen to
check objects in the order to make us detect issues with tag T, not
with object X. Remove this unwarranted assumption.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule frotz" was not diagnosed as "frotz" being an unknown
subcommand to "git submodule"; the user instead got a complaint that
"git submodule status" was run with an unknown path "frotz".
* rr/maint-submodule-unknown-cmd:
submodule: if $command was not matched, don't parse other args
"git fetch" over http advertised that it supports "deflate", which
is much less common, and did not advertise more common "gzip" on its
Accept-Encoding header.
* sp/maint-http-enable-gzip:
Enable info/refs gzip decompression in HTTP client
The 'a', 'i' and 'c' commands take a literal text to be added
followed by backslash, but then in the source we cannot indent
the literal text which makes it ugly.
We need to also remember to double the backslash inside double
quotes.
Avoid these issues altogether by having an extra line in a template
file and generate test vectors by deleting the line or replacing the
line and not using the 'a' command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The actual external command to run for mergetool backend can be
specified with difftool/mergetool.$name.cmd configuration
variables, but this mechanism was ignored for the backends we
natively support.
* da/mergetool-custom:
mergetool--lib: Allow custom commands to override built-ins
Send errors from "unpack-objects" and "index-pack" back to the "git
push" over the git and smart-http protocols, just like it is done
for a push over the ssh protocol.
* jk/receive-pack-unpack-error-to-pusher:
receive-pack: drop "n/a" on unpacker errors
receive-pack: send pack-processing stderr over sideband
receive-pack: redirect unpack-objects stdout to /dev/null
Running "git fetch" in a repository made with "git clone --single"
slurps all the branches, defeating the point of "--single".
* rt/maint-clone-single:
clone --single: limit the fetch refspec to fetched branch
Introduce a configuration variable diff.context that tells
Porcelain commands to use a non-default number of context
lines instead of 3 (the default). With this variable, users
do not have to keep repeating "git log -U8" from the command
line; instead, it becomes sufficient to say "git config
diff.context 8" just once.
Signed-off-by: Jeff Muizelaar <jmuizelaar@mozilla.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When adding a new submodule it can happen that .git/modules/<name> already
contains a submodule repo, e.g. when a submodule is removed from the work
tree and another submodule is added at the same path. But then the work
tree of the submodule will be populated using the existing repository and
not the one the user provided, which results in an incorrect work tree. On
the other hand the user might reactivate a submodule removed earlier, then
reusing that .git directory is the Right Thing to do.
As git can't decide what is the case, error out and tell the user she
should use either use a different name for the submodule with the "--name"
option or can reuse the .git directory for the newly added submodule by
providing the --force option (which only makes sense when the upstream
matches, so the error message lists all remotes of .git/modules/<name>).
In one test in t7406 the --force option had to be added to "git submodule
add", as that test re-adds a formerly removed submodule.
Reported-by: Jonathan Johnson <me@jondavidjohn.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-log-grep-all-match-1:
grep.c: make two symbols really file-scope static this time
t7810-grep: test --all-match with multiple --grep and --author options
t7810-grep: test interaction of multiple --grep and --author options
t7810-grep: test multiple --author with --all-match
t7810-grep: test multiple --grep with and without --all-match
t7810-grep: bring log --grep tests in common form
grep.c: mark private file-scope symbols as static
log: document use of multiple commit limiting options
log --grep/--author: honor --all-match honored for multiple --grep patterns
grep: show --debug output only once
grep: teach --debug option to dump the parse tree
Allows users to turn off smart-http when talking to dumb-only
servers.
* jk/smart-http-switch:
remote-curl: let users turn off smart http
remote-curl: rename is_http variable
Teach an option to edit the insn sheet to "git rebase -i".
* aw/rebase-i-edit-todo:
rebase -i: suggest using --edit-todo to fix an unknown instruction
rebase -i: Add tests for "--edit-todo"
rebase -i: Teach "--edit-todo" action
rebase -i: Refactor help messages for todo file
rebase usage: subcommands can not be combined with -i
"git submodule add" initializes the name of a submodule to its path. This
was ok as long as the .git directory lived inside the submodule's work
tree, but since 1.7.8 it is stored in the .git/modules/<name> directory of
the superproject, making the submodule name survive the removal of the
submodule's work tree. This leads to problems when the user tries to add a
different submodule at the same path - and thus the same name - later, as
that will happily try to restore the submodule from the old repository
instead of the one the user specified and will lead to a checkout of the
wrong repository.
Add the new "--name" option to let the user provide a name for the
submodule. This enables the user to solve this conflict without having to
remove .git/modules/<name> by hand (which is no viable solution as it
makes it impossible to checkout a commit that records the old submodule
and populate it, as that will still check out the new submodule for the
same reason).
To achieve that the submodule's name is added to the parameter list of
the module_clone() helper function. This makes it possible to remove the
call of module_name() there because both callers of module_clone() already
know the name and can provide it as argument number two.
Reported-by: Jonathan Johnson <me@jondavidjohn.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to --author/--committer which filters commits by author and
committer header fields. --grep-reflog adds a fake "reflog" header to
commit and a grep filter to search on that line.
All rules to --author/--committer apply except no timestamp stripping.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep supports only author and committer headers, which have the same
special treatment that later headers may or may not have. Check for
field type and only strip_timestamp() when the field is either author
or committer.
GREP_HEADER_FIELD_MAX is put in the grep_header_field enum to be
calculated automatically, correctly, as long as it's at the end of the
enum.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently using "git rm" on a submodule - populated or not - fails with
this error:
fatal: git rm: '<submodule path>': Is a directory
This made sense in the past as there was no way to remove a submodule
without possibly removing unpushed parts of the submodule's history
contained in its .git directory too, so erroring out here protected the
user from possible loss of data.
But submodules cloned with a recent git version do not contain the .git
directory anymore, they use a gitfile to point to their git directory
which is safely stored inside the superproject's .git directory. The work
tree of these submodules can safely be removed without losing history, so
let's teach git to do so.
Using rm on an unpopulated submodule now removes the empty directory from
the work tree and the gitlink from the index. If the submodule's directory
is missing from the work tree, it will still be removed from the index.
Using rm on a populated submodule using a gitfile will apply the usual
checks for work tree modification adapted to submodules (unless forced).
For a submodule that means that the HEAD is the same as recorded in the
index, no tracked files are modified and no untracked files that aren't
ignored are present in the submodules work tree (ignored files are deemed
expendable and won't stop a submodule's work tree from being removed).
That logic has to be applied in all nested submodules too.
Using rm on a submodule which has its .git directory inside the work trees
top level directory will just error out like it did before to protect the
repository, even when forced. In the future git could either provide a
message informing the user to convert the submodule to use a gitfile or
even attempt to do the conversion itself, but that is not part of this
change.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --quiet is requested, gc --auto should not display messages unless
there is an error.
Signed-off-by: Tobias Ulmer <tobiasu@tmux.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We correctly handle completion items with spaces just fine,
since we pass the lists around with newline delimiters.
However, we do not handle filenames with shell
metacharacters, as "compgen -W" performs expansion on the
list we give it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We were not testing ref or tree completion at all. Let's
give them even basic sanity checks to avoid regressions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The malloc checks in tests are currently disabled. Actually evaluate
the variable for turning them off and enable them if it's unset.
Also use this opportunity to give it the more descriptive and
consistent name TEST_NO_MALLOC_CHECK.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule" command DWIMs the command line and assumes a
unspecified action word for 'status' action. This is a UI mistake
that leads to a confusing behaviour. A mistyped command name is
instead treated as a request for 'status' of the submodule with that
name, e.g.
$ git submodule show
error: pathspec 'show' did not match any file(s) known to git.
Did you forget to 'git add'?
Stop DWIMming an unknown or mistyped subcommand name as pathspec
given to unspelled "status" subcommand. "git submodule" without any
argument is still interpreted as "git submodule status", but its
value is questionable.
Adjust t7400 to match, and stop advertising the default subcommand
being 'status' which does not help much in practice, other than
promoting laziness and confusion.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running "whatchanged --graph -m" on a simple two-head merges
can fall into infinite loop.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only the first test t0000 in the test suite made sure we have built
Git to be tested; move the check to test-lib so that it applies to
all tests equally.
* rr/test-make-sure-we-have-git:
t/test-lib: make sure Git has already been built
Run our test scripts with MALLOC_CHECK_ and MALLOC_PERTURB_, the
built-in memory access checking facility GNU libc has.
* ep/malloc-check-perturb:
MALLOC_CHECK: various clean-ups
Add MALLOC_CHECK_ and MALLOC_PERTURB_ libc env to the test suite for detecting heap corruption
When "git am" is fed an input that has multiple "Content-type: ..."
header, it did not grok charset= attribute correctly.
* jc/maint-mailinfo-mime-attr:
mailinfo: do not concatenate charset= attribute values from mime headers
The codepath for handling "--tee" ends up relaunching the test
script under a shell, and that one has to be a Bourne. But we
incorrectly used $SHELL, which could be a non-Bourne (e.g. zsh or
csh); we have the Makefile variable $SHELL_PATH for exactly that,
so use it instead.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow users to override the default commands provided by the
mergetools/* scriptlets.
Users occasionally run into problems where they expect to be
able to override the built-in tool names. The documentation
does not explicitly mention that built-ins cannot be overridden,
so it's easy to assume that it should work.
Lift this restriction so that built-in tools are handled the
same way as user-configured tools. Add tests to guarantee this
behavior.
A nice benefit of this change is that it protects users from
having future versions of git trump their custom configuration
with a new built-in tool.
C.f.:
http://stackoverflow.com/questions/7435002/mergetool-from-gitconfig-being-ignoredhttp://thread.gmane.org/gmane.comp.version-control.msysgit/13188http://thread.gmane.org/gmane.comp.version-control.git/148267
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even during a conflicted merge, "git blame $path" always meant to
blame uncommitted changes to the "working tree" version; make it
more useful by showing cleanly merged parts as coming from the other
branch that is being merged.
This incidentally fixes an unrelated problem on a case insensitive
filesystem, where "git blame MAKEFILE" run in a history that has
"Makefile" but not "MAKEFILE" did not say "No such file MAKEFILE in
HEAD" but pretended as if "MAKEFILE" was a newly added file.
* jc/maint-blame-no-such-path:
blame: allow "blame file" in the middle of a conflicted merge
blame $path: avoid getting fooled by case insensitive filesystems
"git fetch --all", when passed "--no-tags", did not honor the
"--no-tags" option while fetching from individual remotes (the same
issue existed with "--tags", but combination "--all --tags" makes
much less sense than "--all --no-tags").
* dj/fetch-all-tags:
fetch --all: pass --tags/--no-tags through to each remote
submodule: use argv_array instead of hand-building arrays
fetch: use argv_array instead of hand-building arrays
argv-array: fix bogus cast when freeing array
argv-array: add pop function
Usually there is no need for users to specify whether an
http remote is smart or dumb; the protocol is designed so
that a single initial request is made, and the client can
determine the server's capability from the response.
However, some misconfigured dumb-only servers may not like
the initial request by a smart client, as it contains a
query string. Until recently, commit 703e6e7 worked around
this by making a second request. However, that commit was
recently reverted due to its side effect of masking the
initial request's error code.
Since git has had that workaround for several years, we
don't know exactly how many such misconfigured servers are
out there. The reversion of 703e6e7 assumes they are rare
enough not to worry about. Still, that reversion leaves
somebody who does run into such a server with no escape
hatch at all. Let's give them an environment variable they
can tweak to perform the "dumb" request.
This is intentionally not a documented interface. It's
overly simple and is really there for debugging in case
somebody does complain about git not working with their
server. A real user-facing interface would entail a
per-remote or per-URL config variable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output from git push currently looks like this:
$ git push dest HEAD
fatal: [some message from index-pack]
error: unpack failed: index-pack abnormal exit
To dest
! [remote rejected] HEAD -> master (n/a (unpacker error))
That n/a is meant to be "the per-ref status is not
available" but the nested parentheses just make it look
ugly. Let's turn the final line into just:
! [remote rejected] HEAD -> master (unpacker error)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After running "git clone --single", the resulting repository has the
usual default "+refs/heads/*:refs/remotes/origin/*" wildcard fetch
refspec installed, which means that a subsequent "git fetch" will
end up grabbing all the other branches.
Update the fetch refspec to cover only the singly cloned ref instead
to correct this.
That means:
If "--single" is used without "--branch" or "--mirror", the
fetch refspec covers the branch on which remote's HEAD points to.
If "--single" is used with "--branch", it'll cover only the branch
specified in the "--branch" option.
If "--single" is combined with "--mirror", then it'll cover all
refs of the cloned repository.
If "--single" is used with "--branch" that specifies a tag, then
it'll cover only the ref for this tag.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some HTTP servers try to use gzip compression on the /info/refs
request to save transfer bandwidth. Repositories with many tags
may find the /info/refs request can be gzipped to be 50% of the
original size due to the few but often repeated bytes used (hex
SHA-1 and commonly digits in tag names).
For most HTTP requests enable "Accept-Encoding: gzip" ensuring
the /info/refs payload can use this encoding format.
Only request gzip encoding from servers. Although deflate is
supported by libcurl, most servers have standardized on gzip
encoding for compression as that is what most browsers support.
Asking for deflate increases request sizes by a few bytes, but is
unlikely to ever be used by a server.
Disable the Accept-Encoding header on probe RPCs as response bodies
are supposed to be exactly 4 bytes long, "0000". The HTTP headers
requesting and indicating compression use more space than the data
transferred in the body.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a long-standing bug in "git log --grep" when multiple "--grep"
are used together with "--all-match" and "--author" or "--committer".
* jc/maint-log-grep-all-match:
t7810-grep: test --all-match with multiple --grep and --author options
t7810-grep: test interaction of multiple --grep and --author options
t7810-grep: test multiple --author with --all-match
t7810-grep: test multiple --grep with and without --all-match
t7810-grep: bring log --grep tests in common form
grep.c: mark private file-scope symbols as static
log: document use of multiple commit limiting options
log --grep/--author: honor --all-match honored for multiple --grep patterns
grep: show --debug output only once
grep: teach --debug option to dump the parse tree
Add '--conflict' option to git-p4 subcommand to specify what action
to take when conflicts are found during 'p4 submit'.
* pw/p4-submit-conflicts:
git-p4: add submit --conflict option and config varaiable
git p4: add submit --prepare-p4-only option
git p4: add submit --dry-run option
git p4: accept -v for --verbose
git p4: revert deleted files after submit cancel
git p4: rearrange submit template construction
git p4: test clean-up after failed submit, fix added files
git p4: standardize submit cancel due to unchanged template
git p4: move conflict prompt into run, add [q]uit input
git p4: remove submit failure options [a]pply and [w]rite
git p4: gracefully fail if some commits could not be applied
git p4 test: remove bash-ism of combined export/assignment
After "git cherry-pick -s" gave control back to the user asking
help to resolve conflicts, concluding "git commit" needs to be run
with "-s" if the user wants to sign it off, but the command should
be able to remember that.
* mv/cherry-pick-s:
cherry-pick: don't forget -s on failure
When tests were run without building git, they stopped with:
.: 54: Can't open /path/to/git/source/t/../GIT-BUILD-OPTIONS
Move the check that makes sure that git has already been built from
t0000 to test-lib, so that any test will do so before it runs.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the todo sheet of interactive rebase instructs to run a non-existing
command, the operation stops with the following error:
Execution failed: no-such
You can fix the problem, and then run
git rebase --continue
fatal: 'rebase' appears to be a git command, but we were not
able to execute it. Maybe git-rebase is broken?
The reason is that the shell that attempted to run the command exits with
code 127. rebase--interactive just forwards this code to the caller (the
git wrapper). But our smart run-command infrastructure detects this
special exit code and turns it into ENOENT, which in turn is interpreted
by the git wrapper as if the external command that it just executed did
not exist. This is finally translated to the misleading last two lines in
error message cited above.
Fix it by translating the error code before it is forwarded.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The most important in this change is to avoid affecting anything
when test-lib is used from perf-lib. It also limits the effect of
the MALLOC_CHECK only to what is run inside the actual test, and
uses a fixed MALLOC_PERTURB_ in order to avoid hurting repeatability
of the tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
t/perf: add "trash directory" to .gitignore
Add missing -z to git check-attr usage text for consistency with man page
git-jump: ignore (custom) prefix in diff mode
Documentation: indent-with-non-tab uses "equivalent tabs" not 8
completion: add --no-edit to git-commit
Code simplification and clarification.
* mh/fetch-filter-refs:
test-string-list.c: Fix some sparse warnings
fetch-pack: eliminate spurious error messages
cmd_fetch_pack(): simplify computation of return value
fetch-pack: report missing refs even if no existing refs were received
cmd_fetch_pack(): return early if finish_connect() fails
filter_refs(): simplify logic
filter_refs(): build refs list as we go
filter_refs(): delete matched refs from sought list
fetch_pack(): update sought->nr to reflect number of unique entries
filter_refs(): do not check the same sought_pos twice
Change fetch_pack() and friends to take string_list arguments
fetch_pack(): reindent function decl and defn
Rename static function fetch_pack() to http_fetch_pack()
t5500: add tests of fetch-pack --all --depth=N $URL $REF
t5500: add tests of error output for missing refs
* mh/string-list:
api-string-list.txt: initialize the string_list the easy way
string_list: add a function string_list_longest_prefix()
string_list: add a new function, string_list_remove_duplicates()
string_list: add a new function, filter_string_list()
string_list: add two new functions for splitting strings
string_list: add function string_list_append_nodup()
"git blame MAKEFILE" run in a history that has "Makefile" but not
"MAKEFILE" should say "No such file MAKEFILE in HEAD", but got
confused on a case insensitive filesystem and failed to do so.
Even during a conflicted merge, "git blame $path" always meant to
blame uncommitted changes to the "working tree" version; make it
more useful by showing cleanly merged parts as coming from the other
branch that is being merged.
* jc/maint-blame-no-such-path:
blame: allow "blame file" in the middle of a conflicted merge
blame $path: avoid getting fooled by case insensitive filesystems
"Content-type: text/plain; charset=UTF-8" header should not appear
twice in the input, but it is always better to gracefully deal with
such a case. The current code concatenates the value to the values
we have seen previously, producing nonsense such as "utf8UTF-8".
Instead of concatenating, forget the previous value and use the last
value we see.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add Ada xfuncname and wordRegex patterns to the list of builtin
patterns.
Signed-off-by: Adrian Johnson <ajohnson@redneon.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows specifying what to do when a conflict
happens when applying a commit to p4, automating the
interactive prompt.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option can be used to prepare the client workspace for
submission, only. It does not invoke the final "p4 submit".
A message describes how to proceed, either submitting the
changes or reverting.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new option, "git p4 submit --dry-run" can be used to verify
what commits and labels would be moved into p4.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user can decide not to continue with a submission,
by not saving the p4 submit template, then answering "no" to
the "Submit anyway?" prompt. In this case, be sure to
return the p4 client to its initial state.
Deleted files were not reverted; fix this and test all cases.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test a variety of cases where a patch failed to apply to
p4 and had to be cleaned up.
If the patch failed to apply cleanly, do not try to remove
to-be-added files, as they have not really been added yet.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When editing the submit template, if no change was made to it,
git p4 offers a prompt "Submit anyway?". Answering "no" cancels
the submit.
Previously, a "no" answer behaves like a "[s]kip" answer to the
failed-patch prompt, in that it proceeded to try to apply the
rest of the commits. Instead, put users back into the new
"[s]kip / [c]ontinue" loop so that they can decide. This makes
both cases of patch failure behave identically.
The return code of git p4 after a "no" answer is now the same
as that for a "skip" due to failed patch; update a test to
understand this.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When applying a commit to the p4 workspace fails, a prompt
asks what to do next. This belongs up in run() instead
of in applyCommit(), where run() can notice, for instance,
that the prompt is unnecessary because this is the last commit.
Offer two options about how to continue at conflict: [s]kip or
[q]uit. Having an explicit "quit" option gives git p4 a chance
to clean up, show the applied-commit summary, and do tag export.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a commit fails to apply cleanly to the p4 tree, an interactive
prompt asks what to do next. In all cases (skip, apply, write),
the behavior after the prompt had a few problems.
Change it so that it does not claim erroneously that all commits
were applied. Instead list the set of the patches under
consideration, and mark with an asterisk those that were
applied successfully. Like this example:
Applying 592f1f9 line5 in file1 will conflict
...
Unfortunately applying the change failed!
What do you want to do?
[s]kip this patch / [a]pply the patch forcibly and with .rej files / [w]rite the patch to a file (patch.txt) s
Skipping! Good luck with the next patches...
//depot/file1#4 - was edit, reverted
Applying b8db1c6 okay_commit_after_skip
...
Change 6 submitted.
Applied only the commits marked with '*':
592f1f9 line5 in file1 will conflict
* b8db1c6 okay_commit_after_skip
Do not try to sync and rebase unless all patches were applied.
If there was a conflict during the submit, there is sure to be one
at the rebase. Let the user to do the sync and rebase manually.
This changes how a couple tets in t9810-git-p4-rcs.sh behave:
- git p4 now does not leave files open and edited in the
client
- If a git commit contains a change to a file that was
deleted in p4, the test used to check that the sync/rebase
loop happened after the failure to apply the change. Since
now sync/rebase does not happen after failure, do not test
this. Normal rebase machinery, outside of git p4, will let
rebase --skip work.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code used to have a bug that ignores "--all-match", that requires
all "--grep" to have matched, when "--author" or "--committer" was used.
Make sure the bug will not be reintroduced.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are tests for this interaction already. Restructure slightly and
avoid any claims about --all-match.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--all-match" option is about "--grep", and does not affect how
"--author" or "--committer" limitation is applied.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The log --grep tests generate the expected out in different ways.
Make them all use command blocks so that subshells are avoided and the
expected output is easier to grasp visually.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge -Xtheirs" did not help content-level merge of binary
files; it should just take their version. Also "*.jpg binary" in
the attributes did not imply they should use the binary ll-merge
driver.
* jc/ll-merge-binary-ours:
ll-merge: warn about inability to merge binary files only when we can't
attr: "binary" attribute should choose built-in "binary" merge driver
merge: teach -Xours/-Xtheirs to binary ll-merge driver
* mz/cherry-pick-cmdline-order:
cherry-pick/revert: respect order of revisions to pick
demonstrate broken 'git cherry-pick three one two'
teach log --no-walk=unsorted, which avoids sorting
Recent versions of Linux libc (later than 5.4.23) and glibc (2.x)
include a malloc() implementation which is tunable via environment
variables. When MALLOC_CHECK_ is set, a special (less efficient)
implementation is used which is designed to be tolerant against
simple errors, such as double calls of free() with the same argument,
or overruns of a single byte (off-by-one bugs). When MALLOC_CHECK_
is set to 3, a diagnostic message is printed on stderr
and the program is aborted.
Setting the MALLOC_PERTURB_ environment variable causes the malloc
functions in libc to return memory which has been wiped and clear
memory when it is returned.
Of course this does not affect calloc which always does clear the memory.
The reason for this exercise is, of course, to find code which uses
memory returned by malloc without initializing it and code which uses
code after it is freed. valgrind can do this but it's costly to run.
The MALLOC_PERTURB_ exchanges the ability to detect problems in 100%
of the cases with speed.
The byte value used to initialize values returned by malloc is the byte
value of the environment value. The value used to clear memory is the
bitwise inverse. Setting MALLOC_PERTURB_ to zero disables the feature.
This technique can find hard to detect bugs.
It is therefore suggested to always use this flag (at least temporarily)
when testing out code or a new distribution.
But the test suite can use also valgrind(memcheck) via 'make valgrind'
or 'make GIT_TEST_OPTS="--valgrind"'.
Memcheck wraps client calls to malloc(), and puts a "red zone" on
each end of each block in order to detect access overruns.
Memcheck already detects double free() (up to the limit of the buffer
which remembers pending free()). Thus memcheck subsumes all the
documented coverage of MALLOC_CHECK_.
If MALLOC_CHECK_ is set non-zero when running memcheck, then the
overruns that might be detected by MALLOC_CHECK_ would be overruns
on the wrapped blocks which include the red zones. Thus MALLOC_CHECK_
would be checking memcheck, and not the client. This is not useful,
and actually is wasteful. The only possible [documented] advantage
of using MALLOC_CHECK_ and memcheck together, would be if MALLOC_CHECK_
detected duplicate free() in more cases than memcheck because memcheck's
buffer is too small.
Therefore we don't use MALLOC_CHECK_ and valgrind(memcheck) at the
same time.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/abspath:
t0060: split absolute path test in two to exercise some of it on Windows
t0060: verify that real_path() removes extra slashes
real_path(): properly handle nonexistent top-level paths
t0060: verify that real_path() works correctly with absolute paths
real_path(): reject the empty string
t0060: verify that real_path() fails if passed the empty string
absolute_path(): reject the empty string
t0060: verify that absolute_path() fails if passed the empty string
t0060: move tests of real_path() from t0000 to here
"git fetch --all", when passed "--no-tags", did not honor the
"--no-tags" option while fetching from individual remotes (the same
issue existed with "--tags", but combination "--all --tags" makes
much less sense than "--all --no-tags").
* dj/fetch-all-tags:
fetch --all: pass --tags/--no-tags through to each remote
* rj/tap-fix:
test-lib.sh: Suppress the "passed all ..." message if no tests run
test-lib.sh: Add check for invalid use of 'skip_all' facility
test-lib.sh: Fix some shell coding style violations
t4016-*.sh: Skip all tests rather than each test
t3902-*.sh: Skip all tests rather than each test
t3300-*.sh: Fix a TAP parse error
In case 'git cherry-pick -s <commit>' failed, the user had to use 'git
commit -s' (i.e. state the -s option again), which is easy to forget
about. Instead, write the signed-off-by line early, so plain 'git
commit' will have the same result.
Also update 'git commit -s', so that in case there is already a relevant
Signed-off-by line before the Conflicts: line, it won't add one more at
the end of the message. If there is no such line, then add it before the
the Conflicts: line.
Signed-off-by: Miklos Vajna <vmiklos@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply -p0" did not parse pathnames on "diff --git" line
correctly. This caused patches that had pathnames in no other
places to be mistakenly rejected (most notably, binary patch that
does not rename nor change mode). Textual patches, renames or mode
changes have preimage and postimage pathnames in different places in
a form that can be parsed unambiguously and did not suffer from this
problem.
* jc/apply-binary-p0:
apply: compute patch->def_name correctly under -p0
"git log .." errored out saying it is both rev range and a path when
there is no disambiguating "--" is on the command line. Update the
command line parser to interpret ".." as a path in such a case.
* jc/dotdot-is-parent-directory:
specifying ranges: we did not mean to make ".." an empty set
Pushing to smart HTTP server with recent Git fails without having
the username in the URL to force authentication, if the server is
configured to allow GET anonymously, while requiring authentication
for POST.
* jk/maint-http-half-auth-push:
http: prompt for credentials on failed POST
http: factor out http error code handling
t: test http access to "half-auth" repositories
t: test basic smart-http authentication
t/lib-httpd: recognize */smart/* repos as smart-http
t/lib-httpd: only route auth/dumb to dumb repos
t5550: factor out http auth setup
t5550: put auth-required repo in auth/dumb
"git for-each-ref" did not honor multiple "--sort=<key>" arguments
correctly.
* kk/maint-for-each-ref-multi-sort:
for-each-ref: Fix sort with multiple keys
t6300: test sort with multiple keys
It used to be that if "--all", "--depth", and also explicit references
were sought, then the explicit references were not handled correctly
in filter_refs() because the "--all --depth" code took precedence over
the explicit reference handling, and the explicit references were
never noted as having been found. So check for explicitly sought
references before proceeding to the "--all --depth" logic.
This fixes two test cases in t5500.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch_pack() removes duplicates from the "sought" list, thereby
shrinking the list. But previously, the caller was not informed about
the shrinkage. This would cause a spurious error message to be
emitted by cmd_fetch_pack() if "git fetch-pack" is called with
duplicate refnames.
Instead, remove duplicates using string_list_remove_duplicates(),
which adjusts sought->nr to reflect the new length of the list.
The last test of t5500 inexplicably *required* "git fetch-pack" to
fail when fetching a list of references that contains duplicates;
i.e., it insisted on the buggy behavior. So change the test to expect
the correct behavior.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document some bugs in "git fetch-pack":
1. If "git fetch-pack" is called with "--all", "--depth", and an
explicit existing non-tag reference to fetch, then it falsely reports
that the reference was not found, even though it was fetched
correctly.
2. If "git fetch-pack" is called with "--all", "--depth", and an
explicit existing tag reference to fetch, then it segfaults in
filter_refs() because return_refs is used without having been
initialized.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If "git fetch-pack" is called with reference names that do not exist
on the remote, then it should emit an error message
error: no such remote ref refs/heads/xyzzy
This is currently broken if *only* missing references are passed to
"git fetch-pack".
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function that finds the longest string from a string_list that
is a prefix of a given string.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function that deletes duplicate entries from a sorted
string_list.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function allows entries that don't match a specified criterion to
be discarded from a string_list while preserving the order of the
remaining entries.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add two new functions, string_list_split() and
string_list_split_in_place(). These split a string into a string_list
on a separator character. The first makes copies of the substrings
(leaving the input string untouched) and the second splits the
original string in place, overwriting the separator characters with
NULs and referring to the original string's memory.
These functions are similar to the strbuf_split_*() functions except
that they work with the more powerful string_list interface.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git blame file" has always meant "find the origin of each line of
the file in the history leading to HEAD, oh by the way, blame the
lines that are modified locally to the working tree".
This teaches "git blame" that during a conflicted merge, some
uncommitted changes may have come from the other history that is
being merged.
The verify_working_tree_path() function introduced in the previous
patch to notice a typo in the filename (primarily on case insensitive
filesystems) has been updated to allow a filename that does not exist
in HEAD (i.e. the tip of our history) as long as it exists one of the
commits being merged, so that a "we deleted, the other side modified"
case tracks the history of the file in the history of the other side.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git ships with a fall-back regexp implementation for platforms with
buggy regexp library; give people a tool to see if they should be
using it on their platform.
* rj/test-regex:
test-regex: Add a test to check for a bug in the regex routines
* jc/test-prereq:
t3910: use the UTF8_NFD_TO_NFC test prereq
test-lib: provide UTF8 behaviour as a prerequisite
t0050: use the SYMLINKS test prereq
t0050: use the CASE_INSENSITIVE_FS test prereq
test-lib: provide case insensitivity as a prerequisite
test: allow prerequisite to be evaluated lazily
test: rename $satisfied to $satisfied_prereq
"git blame MAKEFILE" run in a history that has "Makefile" but not
MAKEFILE can get confused on a case insensitive filesystem, because
the check we run to see if there is a corresponding file in the
working tree with lstat("MAKEFILE") succeeds. In addition to that
check, we have to make sure that the given path also exists in the
commit we start digging history from (i.e. "HEAD").
Note that this reveals the breakage in a test added in cd8ae20
(git-blame shouldn't crash if run in an unmerged tree, 2007-10-18),
which expects the entire merge-in-progress path to be blamed to the
working tree when it did not exist in our tree. As it is clear in
the log message of that commit, the old breakage was that it was
causing an internal error and the fix was about avoiding it.
Just check that the command does not die an uncontrolled death. For
this particular case, the blame should fail, as the history for the
file in that contents has not been committed yet at the point in the
test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch --set-upstream origin/master" is a common mistake to
create a local branch 'origin/master' and set it to integrate with
the current branch. With a plan to deprecate this option, introduce
"git branch (-u|--set-upstream-to) origin/master" that sets the
current branch to integrate with 'origin/master' remote tracking
branch.
* cn/branch-set-upstream-to:
branch: deprecate --set-upstream and show help if we detect possible mistaken use
branch: add --unset-upstream option
branch: introduce --set-upstream-to
"git cherry-pick A C B" used to replay changes in A and then B and
then C if these three commits had committer timestamps in that
order, which is not what the user who said "A C B" naturally expects.
* mz/cherry-pick-cmdline-order:
cherry-pick/revert: respect order of revisions to pick
demonstrate broken 'git cherry-pick three one two'
teach log --no-walk=unsorted, which avoids sorting
We tried to bend backwards to allow "--quiet" to be a synonym as
"-s" when given as e.g. "git show --quiet", but did not quite
succeed.
* jk/maint-quiet-is-synonym-to-s-in-log:
log: fix --quiet synonym for -s
* maint-1.7.11:
Almost 1.7.11.6
gitweb: URL-decode $my_url/$my_uri when stripping PATH_INFO
rebase -i: use full onto sha1 in reflog
sh-setup: protect from exported IFS
receive-pack: do not leak output from auto-gc to standard output
t/t5400: demonstrate breakage caused by informational message from prune
setup: clarify error messages for file/revisions ambiguity
send-email: improve RFC2047 quote parsing
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
When "git push" triggered the automatic gc on the receiving end, a
message from "git prune" that said it was removing cruft leaked to
the standard output, breaking the communication protocol.
* bc/receive-pack-stdout-protection:
receive-pack: do not leak output from auto-gc to standard output
t/t5400: demonstrate breakage caused by informational message from prune
"git diff" had a confusion between taking data from a path in the
working tree and taking data from an object that happens to have
name 0{40} recorded in a tree.
* jk/maint-null-in-trees:
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
"git send-email" did not unquote encoded words that appear on the
header correctly, and lost "_" from strings.
* tr/maint-send-email-2047:
send-email: improve RFC2047 quote parsing
Only the first half of the test works only on POSIX, the second half
passes on Windows as well.
A later test "real path removes other extra slashes" looks very similar,
but it does not make sense to split it in the same way: When two slashes
are prepended in front of an absolute DOS-style path on Windows, the
meaning of the path is changed (//server/share style), so that the test
cannot pass on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The built-in "binary" attribute macro expands to "-diff -text", so
that textual diff is not produced, and the contents will not go
through any CR/LF conversion ever. During a merge, it should also
choose the "binary" low-level merge driver, but it didn't.
Make it expand to "-diff -merge -text".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The (discouraged) -Xours/-Xtheirs modes of merge are supposed to
give a quick and dirty way to come up with a random mixture of
cleanly merged parts and punted conflict resolution to take contents
from one side in conflicting parts. These options however were only
passed down to the low level merge driver for text.
Teach the built-in binary merge driver to notice them as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pushing to smart HTTP server with recent Git fails without having
the username in the URL to force authentication, if the server is
configured to allow GET anonymously, while requiring authentication
for POST.
* jk/maint-http-half-auth-push:
http: prompt for credentials on failed POST
http: factor out http error code handling
t: test http access to "half-auth" repositories
t: test basic smart-http authentication
t/lib-httpd: recognize */smart/* repos as smart-http
t/lib-httpd: only route auth/dumb to dumb repos
t5550: factor out http auth setup
t5550: put auth-required repo in auth/dumb
"git apply -p0" did not parse pathnames on "diff --git" line
correctly. This caused patches that had pathnames in no other
places to be mistakenly rejected (most notably, binary patch that
does not rename nor change mode). Textual patches, renames or
mode changes have preimage and postimage pathnames in different
places in a form that can be parsed unambiguously and did not suffer
from this problem.
* jc/apply-binary-p0:
apply: compute patch->def_name correctly under -p0
"git log .." errored out saying it is both rev range and a path when
there is no disambiguating "--" is on the command line. Update the
command line parser to interpret ".." as a path in such a case.
* jc/dotdot-is-parent-directory:
specifying ranges: we did not mean to make ".." an empty set
"git for-each-ref" did not currectly support more than one --sort
option.
* kk/maint-for-each-ref-multi-sort:
for-each-ref: Fix sort with multiple keys
t6300: test sort with multiple keys
Fix "git p4" when "--use-client-spec" and "--detect-branches" are
used together (the command used to misdetect branches).
* pw/p4-use-client-spec-branch-detection:
git p4: make branch detection work with --use-client-spec
git p4: do wildcard decoding in stripRepoPath
git p4: set self.branchPrefixes in initialization
git p4 test: add broken --use-client-spec --detect-branches tests
git p4 test: move client_view() function to library
Update tests that can be broken with gettext-poison builds.
* nd/i18n-poison-test-updates:
Fix tests under GETTEXT_POISON on parseopt
Fix tests under GETTEXT_POISON on git-remote
Fix tests under GETTEXT_POISON on pack-object
Fix tests under GETTEXT_POISON on git-apply
Fix tests under GETTEXT_POISON on diffstat
Fix tests under GETTEXT_POISON on git-stash
Fix tests under GETTEXT_POISON on relative dates
When fetch is invoked with --all, we need to pass the tag-following
preference to each individual fetch; without this, we will always
auto-follow tags, preventing us from fetching the remote tags into a
remote-specific namespace, for example.
Reported-by: Oswald Buddenhagen <ossi@kde.org>
Signed-off-by: Dan Johnson <ComputerDruid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjusted for Windows by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The change has two points:
1. Do not strip off a leading slash, because that erroneously turns an
absolute path into a relative path.
2. Do not remove slashes from groups of multiple slashes; instead let
chdir() handle them. It could be, for example, that it wants to
leave leading double-slashes alone.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is currently a bug: if passed an absolute top-level path that
doesn't exist (e.g., "/foo") it incorrectly interprets the path as a
relative path (e.g., returns "$(pwd)/foo"). So mark the test as
failing.
These tests are skipped on Windows because test-path-utils operates on
a DOS-style absolute path even if a POSIX style absolute path is
passed as argument.
Adjusted for Windows by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All remote subcommands are spelled out words except 'rm'. 'rm', being a
popular UNIX command name, may mislead users that there are also 'ls' or
'mv'. Use 'remove' to fit with the rest of subcommands.
'rm' is still supported and used in the test suite. It's just not
widely advertised.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule update --force" used to leave the working tree of the
submodule intact when there were local changes. It is more intiutive
to make "--force" a sign to run "checkout -f" to overwrite them.
* sz/submodule-force-update:
Make 'git submodule update --force' always check out submodules.
"git stash" internally used "git merge-recursive" backend, which did
not trigger "rerere" upon conflicts unlike other mergy operations.
* ph/stash-rerere:
stash: invoke rerere in case of conflict
test: git-stash conflict sets up rerere
"git cherry-pick" by default stops when it sees a commit without any
log message. The "--allow-empty-message" option can be used to
silently proceed.
* cw/cherry-pick-allow-empty-message:
cherry-pick: add --allow-empty-message option
