Add an (optional) first parameter "ok=<special case>" to test_must_fail
and return success for "<special case>". Add "success" as
"<special case>" and use it to implement "test_might_fail". This removes
redundancies in test-lib-function.sh.
You can pass multiple <special case> arguments divided by comma (e.g.
"test_must_fail ok=success,something")
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Jeff King <peff@peff.net>
'git filter-branch' fails complaining about an ambiguous argument, if
a tree-filter renames a path and the new pathname happens to match an
existing object name.
After the tree-filter has been applied, 'git filter-branch' looks for
changed paths by running:
git diff-index -r --name-only --ignore-submodules $commit
which then, because of the lack of disambiguating double-dash, can't
decide whether to treat '$commit' as revision or path and errors out.
Add that disambiguating double-dash after 'git diff-index's revision
argument to make sure that '$commit' is interpreted as a revision.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Jeff King <peff@peff.net>
Commit 1b0d400 refactored the prepare_final() function so
that it could be reused in multiple places. Originally, the
loop had two outputs: a commit to stuff into sb->final, and
the name of the commit from the rev->pending array.
After the refactor, that loop is put in its own function
with a single return value: the object_array_entry from the
rev->pending array. This contains both the name and the object,
but with one important difference: the object is the
_original_ object found by the revision parser, not the
dereferenced commit. If one feeds a tag to "git blame", we
end up casting the tag object to a "struct commit", which
causes a segfault.
Instead, let's return the commit (properly casted) directly
from the function, and take the "name" as an optional
out-parameter. This does the right thing, and actually
simplifies the callers, who no longer need to cast or
dereference the object_array_entry themselves.
[test case by Max Kirillov <max@max630.net>]
Signed-off-by: Jeff King <peff@peff.net>
When "p4 submit" command fails in P4Submit.applyCommit, the
workspace is left with the changes. We already have code to revert
the changes to the workspace when the user decides to cancel
submission by aborting the editor that edits the change description,
and we should treat the "p4 submit" failure the same way.
Clean the workspace if p4_write_pipe raised SystemExit, so that the
user don't have to do it themselves.
Signed-off-by: GIRARD Etienne <egirard@murex.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Jeff King <peff@peff.net>
__git_ps1() doesn't indicate dirty index while on an orphan branch.
To check the dirtiness of the index, __git_ps1() runs 'git diff-index
--cached ... HEAD', which doesn't work on an orphan branch,
because HEAD doesn't point to a valid commit.
Run 'git diff ... --cached' instead, as it does the right thing both
on valid and invalid HEAD, i.e. compares the index to the existing
HEAD in the former case and to the empty tree in the latter. This
fixes the two failing tests added in the first commit of this series.
The dirtiness of the worktree is already checked with 'git diff' and
is displayed correctly even on an orphan branch.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Jeff King <peff@peff.net>
There is only a single test exercising the dirty state indicator on an
orphan branch, and in that test neither the index nor the worktree are
dirty.
Add two failing tests to check the dirty state indicator while either
the index is dirty or while both the index and the worktree are dirty
on an orphan branch, and to show that the dirtiness of the index is
not displayed in these cases (the fourth combination, i.e. clean index
and dirty worktree are impossible on an orphan branch). Update the
existing dirty state indicator on clean orphan branch test to match
the style of the two new tests, most importantly to use 'git checkout
--orphan' instead of cd-ing into a repository that just happens to be
empty and clean.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Jeff King <peff@peff.net>
When submitting, git-p4 finds the current branch in
order to know if it is allowed to submit (configuration
"git-p4.allowSubmit").
On a detached head, detecting the branch would fail, and
git-p4 would report a cryptic error.
This change teaches git-p4 to recognise a detached head and
submit successfully.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Jeff King <peff@peff.net>
git-p4 can't submit from a detached head. This test case
demonstrates the problem.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Jeff King <peff@peff.net>
The --recurse-submodules command line parameter has existed for some
time but it has no config file equivalent.
Following the style of the corresponding parameter for git fetch, let's
invent push.recurseSubmodules to provide a default for this
parameter. This also requires the addition of --recurse-submodules=no to
allow the configuration to be overridden on the command line when
required.
The most straightforward way to implement this appears to be to make
push use code in submodule-config in a similar way to fetch.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Jeff King <peff@peff.net>
We check the return value of verify_header() for commits already, so do
the same for tags as well.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Sometimes the "prove" test runner hangs on test exit because p4d is
still running. Add a trap to always kill "p4d" on test exit.
You can reproduce the problem by commenting "P4D_TIMEOUT" in
"lib-git-p4.sh" and running "prove ./t9800-git-p4-basic.sh".
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Our usual style these days is to execute everything inside
test_expect_success. Make it so.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
Add an option "--dump-aliases" which changes the default behavior of
git-send-email. This mode will simply read the alias files configured by
sendemail.aliasesfile and sendemail.aliasfiletype and dump a list of all
configured aliases, one per line. The intended use case for this option
is the bash-completion script which will use it to autocomplete aliases
on the options which take addresses.
Add some tests for the new option using various alias file formats.
A possible future extension to the alias dump format could be done by
extending the --dump-aliases to take an optional argument defining the
format to display. This has not been done in this patch as no user of
this information has been identified.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
In rare cases p4d seems to hang. This watchdog will kill the p4d
process after 300s in any case. That means each individual git p4 test
needs to finish before 300s or it will fail.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Jeff King <peff@peff.net>
In the next commit, we will indent test case preparations. This will
require that here-documents ignore the tab indentation. Prepare for
this change by marking the here-doc words accordingly. This does not
have an effect now, but will remove some noise from the git diff -b
output of the next commit.
The change here is entirely automated with this perl command:
perl -i -lpe 's/(cat.*<<) *((EOF|(EXPECT|INPUT)_END).*$)/$1-$2 &&/' t/t9300-fast-import.sh
i.e., inserts a dash between << and the EOF word (and removes blanks
that our style guide abhors) and appends the && that will become
necessary.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
In rare cases kill/cleanup operations in tests fail. Retry these
operations with a timeout to make the test less flaky.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
A number of clean-ups of test cases are performed outside of
test_expect_success. Replace these cases by using test_when_finished.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
It is customary to have each command in test snippets on its own line.
Fix those instances that do not follow this guideline.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
Instead of comparing actual output to an empty file, use
test_must_be_empty. In addition to the better error message provided by
the helper, allocation of an empty file during the setup sequence can be
avoided.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
One test case open-codes a test for an expected failure. Replace it by
test_must_fail.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
Many test cases do not follow our modern style that places the
single-quotes that surround the shell code snippets before and after
the shell code. Make it so.
Many of the lines changed in this way are indented other than by a
single tab. Change them (and some additional lines) to be indented
with a tab.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
Extend transfer.hideRefs to work better with use of namespaces.
* lf/ref-is-hidden-namespace:
t5509: add basic tests for hideRefs
hideRefs: add support for matching full refs
upload-pack: strip refs before calling ref_is_hidden()
config.txt: document the semantics of hideRefs with namespaces
Having a leftover .idx file without corresponding .pack file in
the repository hurts performance; "git gc" learned to prune them.
* dk/gc-idx-wo-pack:
gc: remove garbage .idx files from pack dir
t5304: test cleaning pack garbage
prepare_packed_git(): refactor garbage reporting in pack directory
When passed an ssh:// url, git strips ssh://host from the url but does
not remove leading slashes from the path. So when this test used
ssh://remote//path/to/pwd, the path accessed by our fake SSH is
//path/to/pwd, which cygwin interprets as a UNC path, causing the test
to fail.
We may want to actually fix this in git itself, making it remove extra
slashes from urls before feeding them to transports or helpers, but
that's for another topic as it could cause regressions.
Signed-off-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Signed-off-by: Jeff King <peff@peff.net>
Since ec7dbd145 (receive-pack: allow hooks to ignore its
standard input stream) the pre-receive and post-receive
hooks ignore SIGPIPE. Do the same for the remaining hooks
pre-push and post-rewrite, which read from standard input.
The same arguments for ignoring SIGPIPE apply.
Include test by Jeff King which checks that SIGPIPE does not
cause pre-push hook failure. With the use of git update-ref
--stdin it is fast enough to be enabled by default.
Signed-off-by: Clemens Buchacher <clemens.buchacher@intel.com>
Signed-off-by: Jeff King <peff@peff.net>
If the user specifies an index filter but not a tree filter,
filter-branch cleverly avoids checking out the tree
entirely. But we don't do the next level of optimization: if
you have no index or tree filter, we do not need to read the
index at all.
This can greatly speed up cases where we are only changing
the commit objects (e.g., cementing a graft into place).
Here are numbers from the newly-added perf test:
Test HEAD^ HEAD
---------------------------------------------------------------
7000.2: noop filter 13.81(4.95+0.83) 5.43(0.42+0.43) -60.7%
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status --branch --short" accessed beyond the constant string
"HEAD", which has been corrected.
* rs/wt-status-detached-branch-fix:
wt-status: use skip_prefix() to get rid of magic string length constants
wt-status: don't skip a magical number of characters blindly
wt-status: avoid building bogus branch name with detached HEAD
wt-status: exit early using goto in wt_shortstatus_print_tracking()
t7060: add test for status --branch on a detached HEAD
"git --literal-pathspecs add -u/-A" without any command line
argument misbehaved ever since Git 2.0.
* jc/add-u-A-default-to-top:
add: simplify -u/-A without pathspec
Merging a branch that removes a path and another that changes the
mode bits on the same path should have conflicted at the path, but
it didn't and silently favoured the removal.
* jk/delete-modechange-conflict:
merge: detect delete/modechange conflict
t6031: generalize for recursive and resolve strategies
t6031: move triple-rename test to t3030
It was not possible to use a repository-lookalike created by "git
worktree add" as a local source of "git clone".
* nd/clone-linked-checkout:
clone: better error when --reference is a linked checkout
clone: allow --local from a linked checkout
enter_repo: allow .git files in strict mode
enter_repo: avoid duplicating logic, use is_git_directory() instead
t0002: add test for enter_repo(), non-strict mode
path.c: delete an extra space
Test whether regular and full hideRefs patterns work as expected when
namespaces are used.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Lukas Fleischer <lfleischer@lfos.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a custom report_garbage handler to collect and remove
garbage .idx files from the pack directory.
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pack garbage, noticeably stale .idx files, can be cleaned up during
a garbage collection. This tests to ensure such garbage is properly
cleaned up.
Note that the prior test for checking pack garbage with count-objects
left some stale garbage after the test exited. This has also been
corrected.
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge-file" tried to signal how many conflicts it found, which
obviously would not work well when there are too many of them.
* jk/merge-file-exit-code:
merge-file: clamp exit code to maximum 127
The submodule code has been taught to work better with separate
work trees created via "git worktree add".
* mk/submodule-gitdir-path:
path: implement common_dir handling in git_pathdup_submodule()
submodule refactor: use strbuf_git_path_submodule() in add_submodule_odb()
Work around "git p4" failing when the P4 depot records the contents
in UTF-16 without UTF-16 BOM.
* ls/p4-translation-failure:
git-p4: handle "Translation of file content failed"
git-p4: add test case for "Translation of file content failed" error
Recent update to "rebase -i" that tries to sanity check the edited
insn sheet before it uses it has become too picky on Windows where
CRLF left by the editor is turned into a trailing CR on the line
read via the "read" built-in command.
* gr/rebase-i-drop-warn:
rebase-i: work around Windows CRLF line endings
t3404: "rebase -i" gets broken when insn sheet uses CR/LF line endings
"git clone --dissociate" runs a big "git repack" process at the
end, and it helps to close file descriptors that are open on the
packs and their idx files before doing so on filesystems that
cannot remove a file that is still open.
* js/clone-dissociate:
clone --dissociate: avoid locking pack files
sha1_file.c: add a function to release all packs
sha1_file: consolidate code to close a pack's file descriptor
t5700: demonstrate a Windows file locking issue with `git clone --dissociate`
Correct "git p4 --detect-labels" so that it does not fail to create
a tag that points at a commit that is also being imported.
* ld/p4-import-labels:
git-p4: fix P4 label import for unprocessed commits
git-p4: do not terminate creating tag for unknown commit
git-p4: failing test for ignoring invalid p4 labels
Prepare for Git on-disk repository representation to undergo
backward incompatible changes by introducing a new repository
format version "1", with an extension mechanism.
* jk/repository-extension:
introduce "preciousObjects" repository extension
introduce "extensions" form of core.repositoryformatversion
"git blame" learnt to take "--first-parent" and "--reverse" at the
same time when it makes sense.
* mk/blame-first-parent:
blame: allow blame --reverse --first-parent when it makes sense
blame: extract find_single_final
blame: test to describe use of blame --reverse --first-parent
"git status --branch --short" accessed beyond the constant string
"HEAD", which has been corrected.
* rs/wt-status-detached-branch-fix:
wt-status: use skip_prefix() to get rid of magic string length constants
wt-status: don't skip a magical number of characters blindly
wt-status: avoid building bogus branch name with detached HEAD
wt-status: exit early using goto in wt_shortstatus_print_tracking()
t7060: add test for status --branch on a detached HEAD
The code to prepare the working tree side of temporary directory
for the "dir-diff" feature forgot that symbolic links need not be
copied (or symlinked) to the temporary area, as the code already
special cases and overwrites them. Besides, it was wrong to try
computing the object name of the target of symbolic link, which may
not even exist or may be a directory.
* da/difftool:
difftool: ignore symbolic links in use_wt_file
Using the timestamp based criteria in "git branch --sort" did not
tiebreak branches that point at commits with the same timestamp (or
the same commit), making the resulting output unstable.
* kn/for-each-branch:
ref-filter: fallback on alphabetical comparison
If we're on a detached HEAD then wt_shortstatus_print_tracking() takes
the string "HEAD (no branch)", translates it, skips the first eleven
characters and passes the result to branch_get(), which returns a bogus
result and accesses memory out of bounds in order to produce it.
Somehow stat_tracking_info(), which is passed that result, does the
right thing anyway, i.e. it finds that there is no base.
Avoid the bogus results and memory accesses by checking for HEAD first
and exiting early in that case. This fixes t7060 with --valgrind.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test fails when run under Valgrind because branch_get() gets passed
a bogus branch name pointer:
==62831== Invalid read of size 1
==62831== at 0x4F76AE: branch_get (remote.c:1650)
==62831== by 0x53499E: wt_shortstatus_print_tracking (wt-status.c:1654)
==62831== by 0x53499E: wt_shortstatus_print (wt-status.c:1706)
==62831== by 0x428D29: cmd_status (commit.c:1384)
==62831== by 0x405D6D: run_builtin (git.c:350)
==62831== by 0x405D6D: handle_builtin (git.c:536)
==62831== by 0x404F10: run_argv (git.c:582)
==62831== by 0x404F10: main (git.c:690)
==62831== Address 0x5e89b0b is 6 bytes after a block of size 5 alloc'd
==62831== at 0x4C28C4F: malloc (vg_replace_malloc.c:299)
==62831== by 0x59579E9: strdup (strdup.c:42)
==62831== by 0x52E108: xstrdup (wrapper.c:43)
==62831== by 0x5322A6: wt_status_prepare (wt-status.c:130)
==62831== by 0x4276E0: status_init_config (commit.c:184)
==62831== by 0x428BB8: cmd_status (commit.c:1350)
==62831== by 0x405D6D: run_builtin (git.c:350)
==62831== by 0x405D6D: handle_builtin (git.c:536)
==62831== by 0x404F10: run_argv (git.c:582)
==62831== by 0x404F10: main (git.c:690)
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow combining --reverse and --first-parent if initial commit of
specified range is at the first-parent chain starting from the final
commit. Disable the prepare_revision_walk()'s builtin children
collection, instead picking only the ones which are along the first
parent chain.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reverse blame can be used to locate removal of lines which does not
change adjacent lines. Such edits do not appear in non-reverse blame,
because the adjacent lines last changed commit is older history, before
the edit.
For a big and active project which uses topic branches, or analogous
feature, for example pull-requests, the history can contain many
concurrent branches, and even after an edit merged into the target
branch, there are still many (sometimes several tens or even hundreds)
topic branch which do not contain it:
a0--a1-----*a2-*a3-a4...-*a100
|\ / / /
| b0-B1..bN / /
|\ / /
| c0.. ..cN /
\ /
z0.. ..zN
Here, the '*'s mark the first parent in merge, and uppercase B1 - the
commit where the line being blamed for was removed. Since commits cN-zN
do not contain B1, they still have the line removed in B1, and
reverse blame can report that the last commit for the line was zN
(meaning that it was removed in a100). In fact it really does return
some very late commit, and this makes it unusable for finding the B1
commit.
The search could be done by blame --reverse --first-parent. For range
a0..a100 it would return a1, and then only one additional blame along
the a0..bN will return the desired commit b0. But combining --reverse
and --first-parent was forbidden in 95a4fb0eac, because incorrectly
specified range could produce unexpected and meaningless result.
Add test which describes the expected behavior of
`blame --reverse --first-parent` in the case described above.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When prefixing a Git call in the test suite with 'debug ', it will
now be run with GDB, allowing the developer to debug test failures
more conveniently.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In ref-filter.c the comparison of refs while sorting is handled by
cmp_ref_sorting() function. When sorting as per numerical values
(e.g. --sort=objectsize) there is no fallback comparison when both
refs hold the same value. This can cause unexpected results (i.e. the
order of listing refs with equal values cannot be pre-determined) as
pointed out by Johannes Sixt ($gmane/280117).
Hence, fallback to alphabetical comparison based on the refname
whenever the other criterion is equal.
A test in t3203 was expecting that branch-two sorts before HEAD, which
happened to be how qsort(3) on Linux sorted the array, but (1) that
outcome was not even guaranteed, and (2) once we start breaking ties
with the refname, "HEAD" should sort before "branch-two" so the
original expectation was inconsistent with the criterion we now use.
Update it to match the new world order, which we can now depend on
being stable.
Helped-by: Junio C Hamano <gitster@pobox.com>
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge-file" tried to signal how many conflicts it found, which
obviously would not work well when there are too many of them.
* jk/merge-file-exit-code:
merge-file: clamp exit code to maximum 127
Recent update to "rebase -i" that tries to sanity check the edited
insn sheet before it uses it has become too picky on Windows where
CRLF left by the editor is turned into a trailing CR on the line
read via the "read" built-in command.
* gr/rebase-i-drop-warn:
rebase-i: work around Windows CRLF line endings
t3404: "rebase -i" gets broken when insn sheet uses CR/LF line endings
Merging a branch that removes a path and another that changes the
mode bits on the same path should have conflicted at the path, but
it didn't and silently favoured the removal.
* jk/delete-modechange-conflict:
merge: detect delete/modechange conflict
t6031: generalize for recursive and resolve strategies
t6031: move triple-rename test to t3030
"git --literal-pathspecs add -u/-A" without any command line
argument misbehaved ever since Git 2.0.
* jc/add-u-A-default-to-top:
add: simplify -u/-A without pathspec
"git clone --dissociate" used to require that "--reference" was
used at the same time, but you can create a new repository that
borrows objects from another without using "--reference", namely
with "clone --local" from a repository that borrows objects from
other repositories.
* ar/clone-dissociate:
clone: allow "--dissociate" without reference
The caller is preparing a narrowed-down copy of the working tree and
this function is asked if the path should be included in that copy.
If we say yes, the path from the working tree will be either symlinked
or copied into the narrowed-down copy.
For any path that is a symbolic link, the caller later fixes up the
narrowed-down copy by unlinking the path and replacing it with a
regular file it writes out that mimics the way how "git diff"
compares symbolic links.
Let's answer "no, you do not want to copy/symlink the working tree
file" for all symbolic links from this function, as we know the
result will not be used because it will be overwritten anyway.
Incidentally, this also stops the function from feeding a symbolic
link in the working tree to hash-object, which is a wrong thing to
do to begin with. The link may be pointing at a directory, or worse
may be dangling (both would be noticed as an error). Even if the
link points at a regular file, hashing the contents of a file that
is pointed at by the link is not correct (Git hashes the contents of
the link itself, not the pointee).
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git-merge-file is documented to return one of three exit
codes:
- zero means the merge was successful
- a negative number means an error occurred
- a positive number indicates the number of conflicts
Unfortunately, this all gets stuffed into an 8-bit return
code. Which means that if you have 256 conflicts, this wraps
to zero, and the merge appears to succeed (and commits a
blob full of conflict-marker cruft!).
This patch clamps the return value to a maximum of 127,
which we should be able to safely represent everywhere. This
also leaves 128-255 for other values. Shells (and some parts
of git) will typically represent signal death as 128 plus
the signal number. And negative values are typically coerced
to an 8-bit unsigned value (so "return -1" ends up as 255).
Technically negative returns have the same problem (e.g.,
"-256" wraps back to 0), but this is not a problem in
practice, as the only negative value we use is "-1".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Editors on Windows can and do save text files with CRLF line
endings, which is the convention on the platform. We are seeing
reports that the "read" command in a port of bash to the environment
however does not strip the CRLF at the end, not adjusting for the
same convention on the platform.
This breaks the recently added sanity checks for the insn sheet fed
to "rebase -i"; instead of an empty line (hence nothing in $command),
the script was getting a lone CR in there.
Special case a lone CR and treat it the same way as an empty line to
work this around.
This patch (also) passes the test with Git for Windows, where the
issue was seen first.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare for Git on-disk repository representation to undergo
backward incompatible changes by introducing a new repository
format version "1", with an extension mechanism.
* jk/repository-extension:
introduce "preciousObjects" repository extension
introduce "extensions" form of core.repositoryformatversion
Add the "list" subcommand to "git worktree".
* mr/worktree-list:
worktree: add 'list' command
worktree: add details to the worktree struct
worktree: add a function to get worktree details
worktree: refactor find_linked_symref function
worktree: add top-level worktree.c
If one side deletes a file and the other changes its
content, we notice and report a conflict. However, if
instead of changing the content, we change only the mode,
the merge does not notice (and the mode change is silently
dropped).
The trivial index merge notices the problem and correctly
leaves the conflict in the index, but both merge-recursive
and merge-one-file will silently resolve this in favor of
the deletion. In many cases that is a sane resolution, but
we should be punting to the user whenever there is any
question. So let's detect and treat this as a conflict (in
both strategies).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This script tests the filemode handling of merge-recursive,
but we do not test the same thing for merge-resolve. Let's
generalize the script a little:
1. Break out the setup steps for each test into a separate
snippet.
2. For each test, run it twice; once with "-s recursive"
and once with "-s resolve". We can avoid repeating
ourselves by adding a function.
3. Since we have a nice abstracted function, we can make
our tests more thorough by testing both directions
(change on "ours" versus "theirs").
This improves our test coverage, and will make this the
place to add more tests related to merging mode changes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The t6031 test was introduced to check filemode handling of
merge-recursive. Much later, an unrelated test was tacked on
to look at renames and d/f conflicts. This test does not
depend on anything that happened before (it actually blows
away any existing content in the test repo). Let's move it
to t3030, where there are more related tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since Git 2.0, "add -u" and "add -A" run from a subdirectory without
any pathspec mean "everything in the working tree" (before 2.0, they
were limited to the current directory). The limiting to the current
directory was implemented by inserting "." to the command line when
the end user did not give us any pathspec. At 2.0, we updated the
code to insert ":/" (instead of '.') to consider everything from the
top-level, by using a pathspec magic "top".
The call to parse_pathspec() using the command line arguments is,
however, made with PATHSPEC_PREFER_FULL option since 5a76aff1 (add:
convert to use parse_pathspec, 2013-07-14), which predates Git 2.0.
In retrospect, there was no need to turn "adding . to limit to the
directory" into "adding :/ to unlimit to everywhere" in Git 2.0;
instead we could just have done "if there is no pathspec on the
command line, just let it be". The parse_pathspec() then would give
us a pathspec that matches everything and all is well.
Incidentally such a simplification also fixes a corner case bug that
stems from the fact that ":/" does not necessarily mean any magic.
A user would say "git --literal-pathspecs add -u :/" from the
command line when she has a directory ':' and wants to add
everything in it (and she knows that her :/ will be taken as
'everything under the sun' magic pathspec unless she disables the
magic with --literal-pathspecs). The internal use of ':/' would
behave the same way as such an explicitly given ":/" when run with
"--literal-pathspecs", and will not add everything under the sun as
the code originally intended.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--reference" option is not the only way to provide a repository
to borrow objects from. A repository that borrows from another
repository can be cloned with "clone --local" and the resulting
repository will borrow from the same repository, which the user
may want to "--dissociate" from.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few test scripts around "git p4" have been improved for
portability.
* ls/p4-test-updates:
git-p4: skip t9819 test case on case insensitive file systems
git-p4: avoid "stat" command in t9815 git-p4-submit-fail
Many allocations that is manually counted (correctly) that are
followed by strcpy/sprintf have been replaced with a less error
prone constructs such as xstrfmt.
Macintosh-specific breakage was noticed and corrected in this
reroll.
* jk/war-on-sprintf: (70 commits)
name-rev: use strip_suffix to avoid magic numbers
use strbuf_complete to conditionally append slash
fsck: use for_each_loose_file_in_objdir
Makefile: drop D_INO_IN_DIRENT build knob
fsck: drop inode-sorting code
convert strncpy to memcpy
notes: document length of fanout path with a constant
color: add color_set helper for copying raw colors
prefer memcpy to strcpy
help: clean up kfmclient munging
receive-pack: simplify keep_arg computation
avoid sprintf and strcpy with flex arrays
use alloc_ref rather than hand-allocating "struct ref"
color: add overflow checks for parsing colors
drop strcpy in favor of raw sha1_to_hex
use sha1_to_hex_r() instead of strcpy
daemon: use cld->env_array when re-spawning
stat_tracking_info: convert to argv_array
http-push: use an argv_array for setup_revisions
fetch-pack: use argv_array for index-pack / unpack-objects
...
"git gc" used to barf when a symbolic ref has gone dangling
(e.g. the branch that used to be your upstream's default when you
cloned from it is now gone, and you did "fetch --prune").
* js/gc-with-stale-symref:
pack-objects: do not get distracted by broken symrefs
gc: demonstrate failure with stale remote HEAD
A recent "filter-branch --msg-filter" broke skipping of the commit
object header, which is fixed.
* jk/filter-branch-use-of-sed-on-incomplete-line:
filter-branch: remove multi-line headers in msg filter
Dirty the test worktree's root directory, as the test expects.
When testing the untracked-cache, we previously assumed that checking
out master would be sufficient to mark the mtime of the worktree's
root directory as racily-dirty. But sometimes, the checkout would
happen at 12345.999 seconds and the status at 12346.001 seconds,
meaning that the worktree's root directory would not be racily-dirty.
And since it was not truly dirty, occasionally the test would fail.
By making the root truly dirty, the test will always succeed.
Tested by running a few hundred times.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent "filter-branch --msg-filter" broke skipping of the commit
object header, which is fixed.
* jk/filter-branch-use-of-sed-on-incomplete-line:
filter-branch: remove multi-line headers in msg filter
There were some classes of errors that "git fsck" diagnosed to its
standard error that did not cause it to exit with non-zero status.
* jc/fsck-dropped-errors:
fsck: exit with non-zero when problems are found
Performance-measurement tests did not work without an installed Git.
* sb/perf-without-installed-git:
t/perf: make runner work even if Git is not installed
After "git checkout --detach", "git status" reported a fairly
useless "HEAD detached at HEAD", instead of saying at which exact
commit.
* mm/detach-at-HEAD-reflog:
status: don't say 'HEAD detached at HEAD'
t3203: test 'detached at' after checkout --detach
"git rebase -i" had a minor regression recently, which stopped
considering a line that begins with an indented '#' in its insn
sheet not a comment, which is now fixed.
* gr/rebase-i-drop-warn:
rebase-i: loosen over-eager check_bad_cmd check
rebase-i: explicitly accept tab as separator in commands
The way how --ref/--notes to specify the notes tree reference are
DWIMmed was not clearly documented.
* jk/notes-dwim-doc:
notes: correct documentation of DWIMery for notes references
The ssh transport, just like any other transport over the network,
did not clear GIT_* environment variables, but it is possible to
use SendEnv and AcceptEnv to leak them to the remote invocation of
Git, which is not a good idea at all. Explicitly clear them just
like we do for the local transport.
* jk/connect-clear-env:
git_connect: clarify conn->use_shell flag
git_connect: clear GIT_* environment for ssh
"git blame --first-parent v1.0..v2.0" was not rejected but did not
limit the blame to commits on the first parent chain.
* jk/blame-first-parent:
blame: handle --first-parent
Teach "git p4" to send large blobs outside the repository by
talking to Git LFS.
* ls/p4-lfs:
git-p4: add Git LFS backend for large file system
git-p4: add support for large file systems
git-p4: check free space during streaming
git-p4: add file streaming progress in verbose mode
git-p4: return an empty list if a list config has no values
git-p4: add gitConfigInt reader
git-p4: add optional type specifier to gitConfig reader
"git gc" used to barf when a symbolic ref has gone dangling
(e.g. the branch that used to be your upstream's default when you
cloned from it is now gone, and you did "fetch --prune").
* js/gc-with-stale-symref:
pack-objects: do not get distracted by broken symrefs
gc: demonstrate failure with stale remote HEAD
"git clone --dissociate" runs a big "git repack" process at the
end, and it helps to close file descriptors that are open on the
packs and their idx files before doing so on filesystems that
cannot remove a file that is still open.
* js/clone-dissociate:
clone --dissociate: avoid locking pack files
sha1_file.c: add a function to release all packs
sha1_file: consolidate code to close a pack's file descriptor
t5700: demonstrate a Windows file locking issue with `git clone --dissociate`
"git rebase -i" had a minor regression recently, which stopped
considering a line that begins with an indented '#' in its insn
sheet not a comment, which is now fixed.
* gr/rebase-i-drop-warn:
rebase-i: loosen over-eager check_bad_cmd check
rebase-i: explicitly accept tab as separator in commands
After "git checkout --detach", "git status" reported a fairly
useless "HEAD detached at HEAD", instead of saying at which exact
commit.
* mm/detach-at-HEAD-reflog:
status: don't say 'HEAD detached at HEAD'
t3203: test 'detached at' after checkout --detach
It was not possible to use a repository-lookalike created by "git
worktree add" as a local source of "git clone".
* nd/clone-linked-checkout:
clone: better error when --reference is a linked checkout
clone: allow --local from a linked checkout
enter_repo: allow .git files in strict mode
enter_repo: avoid duplicating logic, use is_git_directory() instead
t0002: add test for enter_repo(), non-strict mode
path.c: delete an extra space
Update "git branch" that list existing branches, using the
ref-filter API that is shared with "git tag" and "git
for-each-ref".
* kn/for-each-branch:
branch: add '--points-at' option
branch.c: use 'ref-filter' APIs
branch.c: use 'ref-filter' data structures
branch: drop non-commit error reporting
branch: move 'current' check down to the presentation layer
branch: roll show_detached HEAD into regular ref_list
branch: bump get_head_description() to the top
branch: refactor width computation
Performance-measurement tests did not work without an installed Git.
* sb/perf-without-installed-git:
t/perf: make runner work even if Git is not installed
There were some classes of errors that "git fsck" diagnosed to its
standard error that did not cause it to exit with non-zero status.
* jc/fsck-dropped-errors:
fsck: exit with non-zero when problems are found
Work around "git p4" failing when the P4 depot records the contents
in UTF-16 without UTF-16 BOM.
* ls/p4-translation-failure:
git-p4: handle "Translation of file content failed"
git-p4: add test case for "Translation of file content failed" error
The submodule code has been taught to work better with separate
work trees created via "git worktree add".
* mk/submodule-gitdir-path:
path: implement common_dir handling in git_pathdup_submodule()
submodule refactor: use strbuf_git_path_submodule() in add_submodule_odb()
The way how --ref/--notes to specify the notes tree reference are
DWIMmed was not clearly documented.
* jk/notes-dwim-doc:
notes: correct documentation of DWIMery for notes references
When a text file with mixed line endings is commited into the repo,
it is called "not normalized" (or NNO) in t0027. The existing test
case using repoMIX did not fully test all combinations: (Especially
when core.autocrlf = true) Files with NL are not converted at
commit, but at checkout, so a warning NL->CRLF is given. Files with
CRLF are not converted at all (so no warning will be given), unless
they are marked as "text" or "auto".
Remove repoMIX introduced in commit 8eeab92f02, and replace it with
a combination of NNO tests.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
df062010 (filter-branch: avoid passing commit message through sed)
introduced a regression when filtering commits with multi-line headers,
if the header contains a blank line. An example of this is a gpg-signed
commit:
$ git cat-file commit signed-commit
tree 3d4038e029712da9fc59a72afbfcc90418451630
parent 110eac945dc1713b27bdf49e74e5805db66971f0
author A U Thor <author@example.com> 1112912413 -0700
committer C O Mitter <committer@example.com> 1112912413 -0700
gpgsig -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlYXADwACgkQE7b1Hs3eQw23CACgldB/InRyDgQwyiFyMMm3zFpj
pUsAnA+f3aMUsd9mNroloSmlOgL6jIMO
=0Hgm
-----END PGP SIGNATURE-----
Adding gpg
As a consequence, "filter-branch --msg-filter cat" (which should leave the
commit message unchanged) spills the signature (after the internal blank
line) into the original commit message.
The reason is that although the signature is indented, making the line a
whitespace only line, the "read" call is splitting the line based on
the shell's IFS, which defaults to <space><tab><newline>. The leading
space is consumed and $header_line is empty, causing the "skip header
lines" loop to exit.
The rest of the commit object is then re-used as the rewritten commit
message, causing the new message to include the signature of the
original commit.
Set IFS to an empty string for the "read" call, thus disabling the word
splitting, which causes $header_line to be set to the non-empty value ' '.
This allows the loop to fully consume the header lines before
emitting the original, intact commit message.
[jc: this is literally based on MJG's suggestion]
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: James McCoy <vega.james@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows and OS X file systems are case insensitive by default.
Consequently the "git-p4-case-folding" test case does not apply to
them.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the stat command with the ls command to check file mode
bits. The stats command is not available on Windows and has
different command line options on OS X.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is quite possible for, say, a remote HEAD to become broken, e.g.
when the default branch was renamed.
We should still be able to pack our objects when such a thing happens;
simply ignore broken symrefs (because they cannot matter for the packing
process anyway).
This fixes https://github.com/git-for-windows/git/issues/423
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git worktree list' iterates through the worktree list, and outputs
details of the worktree including the path to the worktree, the currently
checked out revision and branch, and if the work tree is bare. There is
also porcelain format option available.
Signed-off-by: Michael Rappazzo <rappazzo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git p4" learned to reencode the pathname it uses to communicate
with the p4 depot with a new option.
* ls/p4-path-encoding:
git-p4: use replacement character for non UTF-8 characters in paths
git-p4: improve path encoding verbose output
git-p4: add config git-p4.pathEncoding
Allow a later "!/abc/def" to override an earlier "/abc" that
appears in the same .gitignore file to make it easier to express
"everything in /abc directory is ignored, except for ...".
* nd/ignore-then-not-ignore:
dir.c: don't exclude whole dir prematurely if neg pattern may match
dir.c: make last_exclude_matching_from_list() run til the end
When `git clone` is asked to dissociate the repository from the
reference repository whose objects were used, it is quite possible that
the pack files need to be repacked. In that case, the pack files need to
be deleted that were originally hard-links to the reference repository's
pack files.
On platforms where a file cannot be deleted if another process still
holds a handle on it, we therefore need to take pains to release all
pack files and indexes before dissociating.
This fixes https://github.com/git-for-windows/git/issues/446
The test case to demonstrate the breakage technically does not need to
be run on Linux or MacOSX. It won't hurt, either, though.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linked checkouts are known under the name worktree, now. Rename the test
accordingly.
Specifically, this avoids the confusion that t2026 is actually not about
pruning in or with linked checkouts aka worktress but about pruning
worktrees, i.e. about "git worktree prune" rather than "git prune".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
804098bb (git rebase -i: add static check for commands and SHA-1,
2015-06-29) tried to check all insns before running any in the todo
list, but it did so by implementing its own parser that is a lot
stricter than necessary. We used to allow lines that are indented
(including comment lines), and we used to allow a whitespace between
the insn and the commit object name to be HT, among other things,
that are flagged as an invalid line by mistake.
Fix this by using the same tokenizer that is used to parse the todo
list file in the new check.
Whether it's a good thing to accept indented comments is
debatable (other commands like "git commit" do not accept them), but we
already accepted them in the past, and some people and scripts rely on
this behavior. Also, a line starting with space followed by a '#' cannot
have any meaning other than being a comment, hence it doesn't harm to
accept them as comments.
Largely based on patch by: Junio C Hamano <gitster@pobox.com>
[jc: updated test with quickfix from Torsten Bögershausen]
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, dissociating from a reference can fail very easily due to
pack files that are still in use when they want to be removed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote" learned "get-url" subcommand to show the URL for a
given remote name used for fetching and pushing.
* bb/remote-get-url:
remote: add get-url subcommand
"git blame --first-parent v1.0..v2.0" was not rejected but did not
limit the blame to commits on the first parent chain.
* jk/blame-first-parent:
blame: handle --first-parent
There was no way to defeat a configured rebase.autostash variable
from the command line, as "git rebase --no-autostash" was missing.
* jk/rebase-no-autostash:
Documentation/git-rebase: fix --no-autostash formatting
rebase: support --no-autostash
The "ref-filter" code was taught about many parts of what "tag -l"
does and then "tag -l" is being reimplemented in terms of "ref-filter".
* kn/for-each-tag:
tag.c: implement '--merged' and '--no-merged' options
tag.c: implement '--format' option
tag.c: use 'ref-filter' APIs
tag.c: use 'ref-filter' data structures
ref-filter: add option to match literal pattern
ref-filter: add support to sort by version
ref-filter: add support for %(contents:lines=X)
ref-filter: add option to filter out tags, branches and remotes
ref-filter: implement an `align` atom
ref-filter: introduce match_atom_name()
ref-filter: introduce handler function for each atom
utf8: add function to align a string into given strbuf
ref-filter: introduce ref_formatting_state and ref_formatting_stack
ref-filter: move `struct atom_value` to ref-filter.c
strtoul_ui: reject negative values
Because "test_when_finished" in our test framework queues the
clean-up tasks to be done in a shell variable, it should not be
used inside a subshell. Add a mechanism to allow 'bash' to catch
such uses, and fix the ones that were found.
* jk/test-lint-forbid-when-finished-in-subshell:
test-lib-functions: detect test_when_finished in subshell
t7800: don't use test_config in a subshell
test-lib-functions: support "test_config -C <dir> ..."
t5801: don't use test_when_finished in a subshell
t7610: don't use test_config in a subshell
The ssh transport, just like any other transport over the network,
did not clear GIT_* environment variables, but it is possible to
use SendEnv and AcceptEnv to leak them to the remote invocation of
Git, which is not a good idea at all. Explicitly clear them just
like we do for the local transport.
* jk/connect-clear-env:
git_connect: clarify conn->use_shell flag
git_connect: clear GIT_* environment for ssh
"git log --date=local" used to only show the normal (default)
format in the local timezone. The command learned to take 'local'
as an instruction to use the local timezone with other formats,
e.g. "git show --date=rfc-local".
* jk/date-local:
t6300: add tests for "-local" date formats
t6300: make UTC and local dates different
date: make "local" orthogonal to date format
date: check for "local" before anything else
t6300: add test for "raw" date format
t6300: introduce test_date() helper
fast-import: switch crash-report date to iso8601
Documentation/rev-list: don't list date formats
Documentation/git-for-each-ref: don't list date formats
Documentation/config: don't list date formats
Documentation/blame-options: don't list date formats
Move the refs used during a "git bisect" session to per-worktree
hierarchy refs/worktree/* so that independent bisect sessions can
be done in different worktrees.
* dt/refs-bisection:
refs: make refs/bisect/* per-worktree
path: optimize common dir checking
refs: clean up common_list
Correct "git p4 --detect-labels" so that it does not fail to create
a tag that points at a commit that is also being imported.
* ld/p4-import-labels:
git-p4: fix P4 label import for unprocessed commits
git-p4: do not terminate creating tag for unknown commit
git-p4: failing test for ignoring invalid p4 labels
The use of 'good/bad' in "git bisect" made it confusing to use when
hunting for a state change that is not a regression (e.g. bugfix).
The command learned 'old/new' and then allows the end user to
say e.g. "bisect start --term-old=fast --term=new=slow" to find a
performance regression.
Michael's idea to make 'good/bad' more intelligent does have
certain attractiveness ($gname/272867), and makes some of the work
on this topic a moot point.
* ad/bisect-terms:
bisect: allow setting any user-specified in 'git bisect start'
bisect: add 'git bisect terms' to view the current terms
bisect: add the terms old/new
bisect: sanity check on terms
Some features from "git tag -l" and "git branch -l" have been made
available to "git for-each-ref" so that eventually the unified
implementation can be shared across all three, in a follow-up
series or two.
* kn/for-each-tag-branch:
for-each-ref: add '--contains' option
ref-filter: implement '--contains' option
parse-options.h: add macros for '--contains' option
parse-option: rename parse_opt_with_commit()
for-each-ref: add '--merged' and '--no-merged' options
ref-filter: implement '--merged' and '--no-merged' options
ref-filter: add parse_opt_merge_filter()
for-each-ref: add '--points-at' option
ref-filter: implement '--points-at' option
tag: libify parse_opt_points_at()
t6302: for-each-ref tests for ref-filter APIs
The init code predates strbufs, and uses PATH_MAX-sized
buffers along with many manual checks on intermediate sizes
(some of which make magic assumptions, such as that init
will not create a path inside .git longer than 50
characters).
We can simplify this greatly by using strbufs, which drops
some hard-to-verify strcpy calls in favor of git_path_buf.
While we're in the area, let's also convert existing calls
to git_path to the safer git_path_buf (our existing calls
were passed to pretty tame functions, and so were not a
problem, but it's easy to be consistent and safe here).
Note that we had an explicit test that "git init" rejects
long template directories. This comes from 32d1776 (init: Do
not segfault on big GIT_TEMPLATE_DIR environment variable,
2009-04-18). We can drop the test_must_fail here, as we now
accept this and need only confirm that we don't segfault,
which was the original point of the test.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add example implementation including test cases for the large file
system using Git LFS.
Pushing files to the Git LFS server is not tested.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perforce repositories can contain large (binary) files. Migrating these
repositories to Git generates very large local clones. External storage
systems such as Git LFS [1], Git Fat [2], Git Media [3], git-annex [4]
try to address this problem.
Add a generic mechanism to detect large files based on extension,
uncompressed size, and/or compressed size.
[1] https://git-lfs.github.com/
[2] https://github.com/jedbrown/git-fat
[3] https://github.com/alebedev/git-media
[4] https://git-annex.branchable.com/
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Conflicts:
Documentation/git-p4.txt
git-p4.py
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After using "git checkout --detach", the reflog is left with an entry
like
checkout: moving from ... to HEAD
This message is parsed to generate the 'HEAD detached at' message in
'git branch' and 'git status', which leads to the not-so-useful message
'HEAD detached at HEAD'.
Instead, when parsing such reflog entry, resolve HEAD to the
corresponding commit in the reflog, so that the message becomes 'HEAD
detached at $sha1'.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This currently fails: the output is 'HEAD detached at HEAD'.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Strict mode is about not guessing where .git is. If the user points to a
.git file, we know exactly where the target .git dir will be. This makes
it possible to serve .git files as repository on the server side.
This may be needed even in local clone case because transport.c code
uses upload-pack for fetching remote refs. But right now the
clone/transport code goes with non-strict.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It matters for linked checkouts where 'refs' directory won't be
available in $GIT_DIR. is_git_directory() knows about $GIT_COMMON_DIR
and can handle this case.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, libcurl will follow circular http redirects
forever. Let's put a cap on this so that somebody who can
trigger an automated fetch of an arbitrary repository (e.g.,
for CI) cannot convince git to loop infinitely.
The value chosen is 20, which is the same default that
Firefox uses.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, libcurl would follow redirection to any protocol
it was compiled for support with. This is desirable to allow
redirection from HTTP to HTTPS. However, it would even
successfully allow redirection from HTTP to SFTP, a protocol
that git does not otherwise support at all. Furthermore
git's new protocol-whitelisting could be bypassed by
following a redirect within the remote helper, as it was
only enforced at transport selection time.
This patch limits redirects within libcurl to HTTP, HTTPS,
FTP and FTPS. If there is a protocol-whitelist present, this
list is limited to those also allowed by the whitelist. As
redirection happens from within libcurl, it is impossible
for an HTTP redirect to a protocol implemented within
another remote helper.
When the curl version git was compiled with is too old to
support restrictions on protocol redirection, we warn the
user if GIT_ALLOW_PROTOCOL restrictions were requested. This
is a little inaccurate, as even without that variable in the
environment, we would still restrict SFTP, etc, and we do
not warn in that case. But anything else means we would
literally warn every time git accesses an http remote.
This commit includes a test, but it is not as robust as we
would hope. It redirects an http request to ftp, and checks
that curl complained about the protocol, which means that we
are relying on curl's specific error message to know what
happened. Ideally we would redirect to a working ftp server
and confirm that we can clone without protocol restrictions,
and not with them. But we do not have a portable way of
providing an ftp server, nor any other protocol that curl
supports (https is the closest, but we would have to deal
with certificates).
[jk: added test and version warning]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
aggregate.perl did not work when Git.pm is not installed to a directory
contained in the default Perl library path list or PERLLIB.
This commit prepends the Perl library path of the current Git source
tree to enable this.
Note that this commit adds a hard-coded relative path
use lib '../../perl/blib/lib';
instead of the flexible environment-based variant
use lib (split(/:/, $ENV{GITPERLLIB}));
which is used in tests written in Perl.
The hard-coded variant is used because the whole performance test
framework does it that way (and GITPERLLIB is not set there).
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We format a pkt-line into a heap buffer, which requires
manual computation of the required size, and uses some bare
sprintf calls. We could use a strbuf instead, which would
take care of the computation for us. But it's even easier
still to use packet_write(). Besides handling the formatting
and writing for us, it fixes two things:
1. Our manual max-size check used 0xFFFF, while technically
LARGE_PACKET_MAX is slightly smaller than this.
2. Our packet will now be output as part of
GIT_TRACE_PACKET debugging.
Unfortunately packet_write() does not let us build up the
buffer progressively, so we do have to repeat ourselves a
little depending on the "vhost" setting, but the end result
is still far more readable than the original.
Since there were no tests covering this feature at all,
we'll add a few into t5802.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_ref already uses a strbuf internally when generating
pathnames, but it uses fixed-size buffers for storing the
refname and symbolic refs. This means that you cannot
actually point HEAD to a ref that is larger than 256 bytes.
We can lift this limit by using strbufs here, too. Like
sb_path, we pass the the buffers into our helper function,
so that we can easily clean up all output paths. We can also
drop the "unsafe" name from our helper function, as it no
longer uses a single static buffer (but of course
resolve_ref_unsafe is still unsafe, because the static
buffers moved there).
As a bonus, we also get to drop some strcpy calls between
the two fixed buffers (that cannot currently overflow
because the two buffers are sized identically).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the '--points-at' option provided by 'ref-filter'. The option lets
the user to list only branches which points at the given object.
Add documentation and tests for the same.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make 'branch.c' use 'ref-filter' APIs for iterating through refs
sorting. This removes most of the code used in 'branch.c' replacing it
with calls to the 'ref-filter' library.
Make 'branch.c' use the 'filter_refs()' function provided by 'ref-filter'
to filter out tags based on the options set.
We provide a sorting option provided for 'branch.c' by using the
sorting options provided by 'ref-filter'. Also by default, we sort by
'refname'. Since 'HEAD' is alphabatically before 'refs/...' we end up
with an array consisting of the 'HEAD' ref then the local branches and
finally the remote-tracking branches.
Also remove the 'ignore' variable from ref_array_item as it was
previously used for the '--merged' option and now that is handled by
ref-filter.
Modify some of the tests in t1430 to check the stderr for a warning
regarding the broken ref. This is done as ref-filter throws a warning
for broken refs rather than directly printing them.
Add tests and documentation for the same.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The definition of log_div() appended information to the web server's
logfile to make the test more readable. However, log_div() was called
right after a request is served (which is done by git-http-backend);
the web server waits for the git-http-backend process to exit before
it writes to the log file. When the duration between serving a request
and exiting was long, the log_div() output was written before the last
request's log, and the test failed. (This duration could become
especially long for PROFILE=GEN builds.)
To get rid of this behavior, we should not change the logfile at all.
This commit removes log_div() and its calls. The additional information
is kept in the test (for readability reasons) but filtered out before
comparing it to the actual logfile.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After finding some problems (e.g. a ref refs/heads/X points at an
object that is not a commit) and issuing an error message, the
program failed to signal the fact that it found an error by a
non-zero exit status.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some protocols (like git-remote-ext) can execute arbitrary
code found in the URL. The URLs that submodules use may come
from arbitrary sources (e.g., .gitmodules files in a remote
repository). Let's restrict submodules to fetching from a
known-good subset of protocols.
Note that we apply this restriction to all submodule
commands, whether the URL comes from .gitmodules or not.
This is more restrictive than we need to be; for example, in
the tests we run:
git submodule add ext::...
which should be trusted, as the URL comes directly from the
command line provided by the user. But doing it this way is
simpler, and makes it much less likely that we would miss a
case. And since such protocols should be an exception
(especially because nobody who clones from them will be able
to update the submodules!), it's not likely to inconvenience
anyone in practice.
Reported-by: Blake Burkhart <bburky@bburky.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are cloning an untrusted remote repository into a
sandbox, we may also want to fetch remote submodules in
order to get the complete view as intended by the other
side. However, that opens us up to attacks where a malicious
user gets us to clone something they would not otherwise
have access to (this is not necessarily a problem by itself,
but we may then act on the cloned contents in a way that
exposes them to the attacker).
Ideally such a setup would sandbox git entirely away from
high-value items, but this is not always practical or easy
to set up (e.g., OS network controls may block multiple
protocols, and we would want to enable some but not others).
We can help this case by providing a way to restrict
particular protocols. We use a whitelist in the environment.
This is more annoying to set up than a blacklist, but
defaults to safety if the set of protocols git supports
grows). If no whitelist is specified, we continue to default
to allowing all protocols (this is an "unsafe" default, but
since the minority of users will want this sandboxing
effect, it is the only sensible one).
A note on the tests: ideally these would all be in a single
test file, but the git-daemon and httpd test infrastructure
is an all-or-nothing proposition rather than a test-by-test
prerequisite. By putting them all together, we would be
unable to test the file-local code on machines without
apache.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
expand_notes_ref is used by --ref from git-notes(1) and --notes from the
git log to find the full refname of a notes reference. Previously the
documentation of these options was not clear about what sorts of
expansions would be performed. Fix the documentation to clearly and
accurately describe the behavior of the expansions.
Add a test for this expansion when using git notes get-ref in order to
prevent future patches from changing this behavior.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A P4 repository can get into a state where it contains a file with
type UTF-16 that does not contain a valid UTF-16 BOM. If git-p4
attempts to retrieve the file then the process crashes with a
"Translation of file content failed" error.
More info here: http://answers.perforce.com/articles/KB/3117
Fix this by detecting this error and retrieving the file as binary
instead. The result in Git is the same.
Known issue: This works only if git-p4 is executed in verbose mode.
In normal mode no exceptions are thrown and git-p4 just exits.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
