Split up the "could not %s %s... %s" message into "could not revert
%s... %s" and "could not apply %s... %s". This makes it easier for
translators to understand the message.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate the "Your local changes [...]" message without using the
`me' variable, instead split up the two messages so translators can
translate the whole messages as-is.
Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "renamed: %s -> %s" message which appears as part of
git-status(1) output. Two tests in t4001-diff-rename.sh explicitly
checked for this message. Change them to skip under
GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "# Initial commit" message. A test in t7501-commit.sh
explicitly checked for this message. Change it to skip under
GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "# Changes to be committed:" messages. Several tests
explicitly checked for this message. Change them to skip under
GETTEXT_POISON=YesPlease.
Since these tests didn't check for the rest of the git-status(1)
output this change has been split up from the "git-status basic
messages" patch.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "nothing to commit" messages. Many tests explicitly
checked for this message. Change them to skip under
GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the most common git-status messages. Many tests checked for
these explicitly. Change them to skip under GETTEXT_POISON=YesPlease.
Some of the tests in t7508-status.sh needed to be split up when I
added C_LOCALE_OUTPUT to them, since parts of them affected later
tests (some of which aren't being skipped) indirectly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "To prevent you from losing history" message. A test in
lib-httpd.sh and another in t5541-http-push.sh explicitly checked for
this message. Change them to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the tag_template message as translatable with N_() and then use
it later with _(). We need to skip a test under GETTEXT_POISON that
relies on the output having a leading newline.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the ""Unstaged changes after reset:" message. A test in
t7102-reset.sh explicitly checked for this message. Change it to skip
under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "Wonderful" message. A test in t7600-merge.sh
explicitly checked for this message. Change it to skip under
GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "You have not concluded your merge messages. A test in
t3030-merge-recursive.sh explicitly checked for this message. Change
it to skip the test under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "Updating %s..%s\n" message. A test in
t1200-tutorial.sh explicitly checked for this message. Split it into
two tests to skip the test_cmp test under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "--name-only/--name-status/--check does not make sense"
messages. A test in t4014-format-patch.sh explicitly checked for these
messages. Change them to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "--open-files-in-pager only works on the worktree"
message. A test in t7811-grep-open.sh explicitly checked for this
message. Change it to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate some of the formatting messages that appear on git-fetch
showing how branches/tags etc. were updated.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "# Please enter the commit message for your changes."
message. Several tests in t7500-commit.sh and t7502-commit.sh assume
that this message starts with a newline. Change the tests to to skip
under GETTEXT_POISON=YesPlease.
These fail under GETTEXT_POISON=YesPlease because the poison editor
message doesn't do the right thing with comments and line breaks, so
these messages will be incorrectly broken up across lines.
This test should not be skipped under a hypothetical future testing
mode that tests Git under language locales, since those messages
should all start with a newline like the original.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "(root-commit)" and "detached HEAD" fragments that
appear when you commit either the root commit, or a commit in a
detached head translatable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "You are in the middle of a merge -- cannot amend."
message. Several tests in t7110-reset-merge.sh explicitly checked for
this message. Change them to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "HEAD is now at" messages. Several tests in t7201-co.sh
explicitly checked for this message. Change them to skip under
GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "(no branch)" message that's shown by "git branch" when
you're in a detached HEAD.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "git branch -v" messages translatable, e.g.:
5054b57 [ahead 8] branch error fixup
This is possibly a plumbing message.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "Deleted %sbranch %s (was %s).\n" messages. test in
t3200-branch.sh explicitly checked for this message. Change it to skip
under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "remove '%s'" message translatable. It's displayed under `git
add -u --verbose`. Also skip the corresponding test when output is not
in the C locale.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "did not match any files" message translatable, and skip the
test that checks for it when the C_LOCALE_OUTPUT prereq is not
present.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests t2204 (.gitignore) and t3700 (add) explicitly check for
these messages, so while at it, split each relevant test into a part
that just checks "git add"'s exit status and a part that checks
porcelain output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These messages could benefit from splitting up. An earlier version of
this patch began like this:
const char *reinit_shared = _("Reinitialized existing shared Git repository in %s\n");
const char *init_shared = _("Initialized empty shared Git repository in %s\n");
const char *reinit_noshared = _("Reinitialized existing Git repository in %s\n");
const char *init_noshared = _("Initialized empty Git repository in %s\n");
But in the first round of gettextization I'm aiming to keep code
changes to a minimum for ease of review. So just add a comment
explaining to translators how the sprintf format gets used so they
can cope for now if the language's grammar allows.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* so/submodule-no-update-first-time:
t7406: "git submodule update {--merge|--rebase]" with new submodules
submodule: no [--merge|--rebase] when newly cloned
The --max-count limit is implemented by counting revisions in
get_revision(), but the -S and -G take effect later when running diff.
Hence "--max-count=10 -Sfoo" meant "examine the 10 first revisions, and
out of them, show only those changing the occurences of foo", not "show 10
revisions changing the occurences of foo".
In case the commit isn't actually shown, cancel the decrement of
max_count.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Fix typo in t/README
ls-remote documentation: <refs> argument is optional
Add Author and Documentation sections to git-for-each-ref.txt
Documentation: remove redundant colons in git-for-each-ref.txt
If the commit to be checked out on "git submodule update" has already been
fetched in the submodule there is no need to run "git fetch" again. Since
"git fetch" recently learned recursion (and the new on-demand mode to
fetch commits recorded in the superproject is enabled by default) this
will happen pretty often, thereby making the unconditional fetch during
"git submodule update" unnecessary.
If the commit is not present in the submodule (e.g. the user disabled the
fetch on-demand mode) the fetch will be run as before.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When looking for submodules where new commits have been recorded in the
superproject ignore those cases where the submodules commits are already
present locally. This can happen e.g. when the submodule has been rewound
to an earlier state. Then there is no need to fetch the submodule again
as the commit recorded in the newly fetched superproject commit has
already been fetched earlier into the submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now the behavior of fetch and pull can be configured to the recently added
'on-demand' mode separately for each submodule too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To enable the user to change the default behavior of "git fetch" and "git
pull" regarding submodule recursion add the new "on-demand" value which
has just been added to the "--recurse-submodules" command line option.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now the --recurse-submodules option could only be used to either
fetch all populated submodules recursively or to disable recursion
completely. As fetch and pull now by default just fetch those submodules
for which new commits have been fetched in the superproject, a command
line option to enforce that behavior is needed to be able to override
configuration settings.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To be able to access all commits of populated submodules referenced by the
superproject it is sufficient to only then let "git fetch" recurse into a
submodule when the new commits fetched in the superproject record new
commits for it. Having these commits present is extremely useful when
using the "--submodule" option to "git diff" (which is what "git gui" and
"gitk" do since 1.6.6), as all submodule commits needed for creating a
descriptive output can be accessed. Also merging submodule commits (added
in 1.7.3) depends on the submodule commits in question being present to
work. Last but not least this enables disconnected operation when using
submodules, as all commits necessary for a successful "git submodule
update -N" will have been fetched automatically. So we choose this mode as
the default for fetch and pull.
Before a new or changed ref from upstream is updated in update_local_ref()
"git rev-list <new-sha1> --not --branches --remotes" is used to determine
all newly fetched commits. These are then walked and diffed against their
parent(s) to see if a submodule has been changed. If that is the case, its
path is stored to be fetched after the superproject fetch is completed.
Using the "--recurse-submodules" or the "--no-recurse-submodules" option
disables the examination of the fetched refs because the result will be
ignored anyway.
There is currently no infrastructure for storing deleted and new
submodules in the .git directory of the superproject. That's why fetch and
pull for now only fetch submodules that are already checked out and are
not renamed.
In t7403 the "--no-recurse-submodules" argument had to be added to "git
pull" to avoid failure because of the moved upstream submodule repo.
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You no longer get this output with GIT_TRACE=1; instead, you
can do GIT_TRACE_SETUP=1.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak the GETTEXT_POISON facility so it is activated at run time
instead of compile time. If the GIT_GETTEXT_POISON environment
variable is set, _(msg) will result in gibberish as before; but if the
GIT_GETTEXT_POISON variable is not set, it will return the message for
human-readable output. So the behavior of mistranslated and
untranslated git can be compared without rebuilding git in between.
For simplicity we always set the GIT_GETTEXT_POISON variable in tests.
This does not affect builds without the GETTEXT_POISON compile-time
option set, so non-i18n git will not be slowed down.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new GETTEXT_POISON compile-time parameter to make _(msg) always
return gibberish. So now you can run
make GETTEXT_POISON=YesPlease
to get a copy of git that functions correctly (one hopes) but produces
output that is in nobody's native language at all.
This is a debugging aid for people who are working on the i18n part of
the system, to make sure that they are not marking plumbing messages
that should never be translated with _().
As new strings get marked for translation, naturally a number of tests
will be broken in this mode. Tests that depend on output from
Porcelain will need to be marked with the new C_LOCALE_OUTPUT test
prerequisite. Newly failing tests that do not depend on output from
Porcelain would be bugs due to messages that should not have been
marked for translation.
Note that the string we're using ("# GETTEXT POISON #") intentionally
starts the pound sign. Some of Git's tests such as
t3404-rebase-interactive.sh rely on interactive editing with a fake
editor, and will needlessly break if the message doesn't start with
something the interactive editor considers a comment.
A future patch will fix fix the underlying cause of that issue by
adding "#" characters to the commit advice automatically.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/rename-no-extra-copy-detection:
diffcore-rename: improve estimate_similarity() heuristics
diffcore-rename: properly honor the difference between -M and -C
for_each_hash: allow passing a 'void *data' pointer to callback
* 'svn-fe' of git://repo.or.cz/git/jrn: (31 commits)
fast-import: make code "-Wpointer-arith" clean
vcs-svn: teach line_buffer about temporary files
vcs-svn: allow input from file descriptor
vcs-svn: allow character-oriented input
vcs-svn: add binary-safe read function
t0081 (line-buffer): add buffering tests
vcs-svn: tweak test-line-buffer to not assume line-oriented input
tests: give vcs-svn/line_buffer its own test script
vcs-svn: make test-line-buffer input format more flexible
vcs-svn: teach line_buffer to handle multiple input files
vcs-svn: collect line_buffer data in a struct
vcs-svn: replace buffer_read_string memory pool with a strbuf
vcs-svn: eliminate global byte_buffer
fast-import: add 'ls' command
vcs-svn: Allow change nodes for root of tree (/)
vcs-svn: Implement Prop-delta handling
vcs-svn: Sharpen parsing of property lines
vcs-svn: Split off function for handling of individual properties
vcs-svn: Make source easier to read on small screens
vcs-svn: More dump format sanity checks
...
* mg/placeholders-are-lowercase:
Make <identifier> lowercase in Documentation
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
CodingGuidelines: downcase placeholders in usage messages
* pw/p4:
git-p4: support clone --bare
git-p4: decode p4 wildcard characters
git-p4: better message for "git-p4 sync" when not cloned
git-p4: reinterpret confusing p4 message
git-p4: accommodate new move/delete type in p4
git-p4: add missing newline in initial import message
git-p4: fix key error for p4 problem
git-p4: test script
* uk/checkout-ambiguous-ref:
Rename t2019 with typo "amiguous" that meant "ambiguous"
checkout: rearrange update_refs_for_switch for clarity
checkout: introduce --detach synonym for "git checkout foo^{commit}"
checkout: split off a function to peel away branchname arg
checkout: fix bug with ambiguous refs
Conflicts:
builtin/checkout.c
* en/object-list-with-pathspec:
Add testcases showing how pathspecs are handled with rev-list --objects
Make rev-list --objects work together with pathspecs
* nd/struct-pathspec: (22 commits)
t6004: add pathspec globbing test for log family
t7810: overlapping pathspecs and depth limit
grep: drop pathspec_matches() in favor of tree_entry_interesting()
grep: use writable strbuf from caller for grep_tree()
grep: use match_pathspec_depth() for cache/worktree grepping
grep: convert to use struct pathspec
Convert ce_path_match() to use match_pathspec_depth()
Convert ce_path_match() to use struct pathspec
struct rev_info: convert prune_data to struct pathspec
pathspec: add match_pathspec_depth()
tree_entry_interesting(): optimize wildcard matching when base is matched
tree_entry_interesting(): support wildcard matching
tree_entry_interesting(): fix depth limit with overlapping pathspecs
tree_entry_interesting(): support depth limit
tree_entry_interesting(): refactor into separate smaller functions
diff-tree: convert base+baselen to writable strbuf
glossary: define pathspec
Move tree_entry_interesting() to tree-walk.c and export it
tree_entry_interesting(): remove dependency on struct diff_options
Convert struct diff_options to use struct pathspec
...
The most important issue is that after unsetting `i18n.commitencoding'
config variable t9500 no longer will use author and comitter name
containing ISO-8859-1 characters, which are invalid UTF-8 characters.
Besides it is good practice in general to clean up the state in tests.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://github.com/gitster/git:
vcs-svn: Allow change nodes for root of tree (/)
vcs-svn: Implement Prop-delta handling
vcs-svn: Sharpen parsing of property lines
vcs-svn: Split off function for handling of individual properties
vcs-svn: Make source easier to read on small screens
vcs-svn: More dump format sanity checks
vcs-svn: Reject path nodes without Node-action
vcs-svn: Delay read of per-path properties
vcs-svn: Combine repo_replace and repo_modify functions
vcs-svn: Replace = Delete + Add
vcs-svn: handle_node: Handle deletion case early
vcs-svn: Use mark to indicate nodes with included text
vcs-svn: Unclutter handle_node by introducing have_props var
vcs-svn: Eliminate node_ctx.mark global
vcs-svn: Eliminate node_ctx.srcRev global
vcs-svn: Check for errors from open()
vcs-svn: Allow simple v3 dumps (no deltas yet)
Conflicts:
t/t9010-svn-fe.sh
vcs-svn/svndump.c
buffer_read_string works well for non line-oriented input except for
one problem: it does not tell the caller how many bytes were actually
written. This means that unless one is very careful about checking
for errors (and eof) the calling program cannot tell the difference
between the string "foo" followed by an early end of file and the
string "foo\0bar\0baz".
So introduce a variant that reports the length, too, a thinner wrapper
around strbuf_fread. Its result is written to a strbuf so the caller
does not need to keep track of the number of bytes read.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
POSIX makes the behavior of read(2) from a pipe fairly clear: a read
from an empty pipe will block until there is data available and any
other read will not block, prefering to return a partial result.
Likewise, fread(3) and fgets(3) are clearly specified to act as
though implemented by calling fgetc(3) in a simple loop. But the
buffering behavior of fgetc is less clear.
Luckily, no sane platform is going to implement fgetc by calling the
equivalent of read(2) more than once. fgetc has to be able to
return without filling its buffer to preserve errno when errors are
encountered anyway. So let's assume the simpler behavior (trust) but
add some tests to catch insane platforms that violate that when they
come (verify).
First check that fread can handle a 0-length read from an empty fifo.
Because open(O_RDONLY) blocks until the writing end is open, open the
writing end of the fifo in advance in a subshell.
Next try short inputs from a pipe that is not filled all the way.
Lastly (two tests) try very large inputs from a pipe that will not fit
in the relevant buffers. The first of these tests reads a little
more than 8192 bytes, which is BUFSIZ (the size of stdio's buffers)
on this Linux machine. The second reads a little over 64 KiB (the
pipe capacity on Linux) and is not run unless requested by setting
the GIT_REMOTE_SVN_TEST_BIG_FILES environment variable.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Do not expect an implicit newline after each input record.
Use a separate command to exercise buffer_skip_bytes.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Split the line_buffer test into small pieces and move it to its
own file as preparation for adding more tests.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Imitate the input format of test-obj-pool to support arbitrary
sequences of commands rather than alternating read/copy. This should
make it easier to add tests that exercise other line_buffer functions.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Lazy fast-import frontend authors that want to rely on the backend to
keep track of the content of the imported trees _almost_ have what
they need in the 'cat-blob' command (v1.7.4-rc0~30^2~3, 2010-11-28).
But it is not quite enough, since
(1) cat-blob can be used to retrieve the content of files, but
not their mode, and
(2) using cat-blob requires the frontend to keep track of a name
(mark number or object id) for each blob to be retrieved
Introduce an 'ls' command to complement cat-blob and take care of the
remaining needs. The 'ls' command finds what is at a given path
within a given tree-ish (tag, commit, or tree):
'ls' SP <dataref> SP <path> LF
or in fast-import's active commit:
'ls' SP <path> LF
The response is a single line sent through the cat-blob channel,
imitating ls-tree output. So for example:
FE> ls :1 Documentation
gfi> 040000 tree 9e6c2b599341d28a2a375f8207507e0a2a627fe9 Documentation
FE> ls 9e6c2b599341d28a2a375f8207507e0a2a627fe9 git-fast-import.txt
gfi> 100644 blob 4f92954396e3f0f97e75b6838a5635b583708870 git-fast-import.txt
FE> ls :1 RelNotes
gfi> 120000 blob b942e49944 RelNotes
FE> cat-blob b942e49944
gfi> b942e49944 blob 32
gfi> Documentation/RelNotes/1.7.4.txt
The most interesting parts of the reply are the first word, which is
a 6-digit octal mode (regular file, executable, symlink, directory,
or submodule), and the part from the second space to the tab, which is
a <dataref> that can be used in later cat-blob, ls, and filemodify (M)
commands to refer to the content (blob, tree, or commit) at that path.
If there is nothing there, the response is "missing some/path".
The intent is for this command to be used to read files from the
active commit, so a frontend can apply patches to them, and to copy
files and directories from previous revisions.
For example, proposed updates to svn-fe use this command in place of
its internal representation of the repository directory structure.
This simplifies the frontend a great deal and means support for
resuming an import in a separate fast-import run (i.e., incremental
import) is basically free.
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Sverre Rabbelier <srabbelier@gmail.com>
When "git commit" was rewritten in C (v1.5.4-rc0~78^2~30,
2007-11-08), a subtle bug in --template was introduced. If the
file named by a --template parameter is missing, previously git
would error out with a message:
Commit template file does not exist.
but in the C version the --template parameter gets ignored and
the default template is used.
t7500 has two tests for this case which would have caught it, except
that with the default $EDITOR, the commit message template is left
unmodified, causing 'git commit' to error out and the test to
succeed.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subject and identity headers may be arbitrarily long. In the
past, we just assumed that single-line headers would be
reasonably short. For multi-line subjects that we squish
into a single line, we just "pre-folded" the data in
pp_title_line by adding a newline and indentation.
There were two problems. One is that, although rare,
single-line messages can actually be longer than the
recommended line-length limits. The second is that the
pre-folding interacted badly with rfc2047 encoding, leading
to malformed headers.
Instead, let's stop pre-folding the subject lines, and just
fold everything based on length in add_rfc2047, whether
it is encoded or not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is possible to break your repository config by creating an invalid key. The
config parser in turn chokes on it:
$ git init
Initialized empty Git repository in /tmp/gittest/.git/
$ git config .foo false
$ git config core.bare
fatal: bad config file line 6 in .git/config
This patch makes git-config reject keys which start or end with a dot and adds
tests for these cases.
Signed-off-by: Libor Pechacek <lpechacek@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sanity-check config variable names when adding and retrieving them. As a side
effect code duplication between git_config_set_multivar and get_value (in
builtin/config.c) was removed and the common functionality was placed in
git_config_parse_key.
This breaks a test in t1300 which used invalid section-less keys in the tests
for "git -c". However, allowing such names there was useless, since there was
no way to set them via config file, and no part of git actually tried to use
section-less keys. This patch updates the test to use more realistic examples
as well as adding its own test.
Signed-off-by: Libor Pechacek <lpechacek@suse.cz>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic in builtin_diffstat assumes that a
complete_rewrite pair should have its lines counted. This is
nonsensical for binary files and leads to confusing things
like:
$ git diff --stat --summary HEAD^ HEAD
foo.rand | Bin 4096 -> 4096 bytes
1 files changed, 0 insertions(+), 0 deletions(-)
$ git diff --stat --summary -B HEAD^ HEAD
foo.rand | 34 +++++++++++++++-------------------
1 files changed, 15 insertions(+), 19 deletions(-)
rewrite foo.rand (100%)
So let's reorder the function to handle binary files first
(which from diffstat's perspective look like complete
rewrites anyway), then rewrites, then actual diffstats.
There are two bonus prizes to this reorder:
1. It gets rid of a now-superfluous goto.
2. The binary case is at the top, which means we can
further optimize it in the next patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the user was advised to use commit -c CHERRY_PICK_HEAD after
a conflicting cherry-pick. While this would preserve the original
commit's authorship, it would sadly discard cherry-pick's carefully
crafted MERGE_MSG (which contains the list of conflicts as well as the
original commit-id in the case of cherry-pick -x).
On the other hand, if a bare 'commit' were performed, it would preserve
the MERGE_MSG while resetting the authorship.
In other words, there was no way to simultaneously take the authorship
from CHERRY_PICK_HEAD and the commit message from MERGE_MSG.
This change fixes that situation. A bare 'commit' will now take the
authorship from CHERRY_PICK_HEAD and the commit message from MERGE_MSG.
If the user wishes to reset authorship, that must now be done explicitly
via --reset-author.
A side-benefit of passing commit authorship along this way is that we
can eliminate redundant authorship parsing code from revert.c.
(Also removed an unused include from revert.c)
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a cherry-pick conflicts git advises:
$ git commit -c <original commit id>
to preserve the original commit message and authorship. Instead, let's
record the original commit id in CHERRY_PICK_HEAD and advise:
$ git commit -c CHERRY_PICK_HEAD
A later patch teaches git to handle the '-c CHERRY_PICK_HEAD' part.
Note that we record CHERRY_PICK_HEAD even in the case where there
are no conflicts so that we may use it to communicate authorship to
commit; this will then allow us to remove set_author_ident_env from
revert.c. However, we do not record CHERRY_PICK_HEAD when --no-commit
is used, as presumably the user intends to further edit the commit
and possibly even cherry-pick additional commits on top.
Tests and documentation contributed by Jonathan Nieder.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All the tests in t3507 (cherry-pick with conflicts) begin with the
same checkout + read-tree + clean incantation to ensure a predictable
starting point. Factor out a function for that so the interesting
part of the tests is easier to read.
The "update-index --refresh" and "diff-index --exit-code HEAD" are not
necessary as the point of this testsuite is not about testing
"read-tree --reset".
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git traditionally overwrites untracked symlinks silently. This will
generally not cause massive data loss, but it is inconsistent with
the behavior for regular files, which are not silently overwritten.
With this change, git refuses to overwrite untracked symlinks by
default. If the user really wants to overwrite the untracked
symlink, he has git-clean and git-checkout -f at his disposal.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
t/t7500-commit.sh: use test_cmp instead of test
t/gitweb-lib.sh: Ensure that errors are shown for --debug --immediate
gitweb/gitweb.perl: don't call S_ISREG() with undef
gitweb/gitweb.perl: remove use of qw(...) as parentheses
Test 5 wants to test --cherry-pick but limits by pathspec in such a way
that there are no commits on the left side of the range.
Add a test without "--cherry-pick" which displays this, and add two
more commits and another test which tests what we're after. This also
shortens the last test.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change commit_msg_is() in t/t7500-commit.sh to use test_cmp instead of
the shell's test function. Now if a test fails we'll get test_cmp
output showing us what failed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because '--immediate' stops test suite after first error, therefore in
this mode
test_debug 'cat gitweb.log'
was never ran, thus in effect negating effect of '--debug' option.
This made finidng the cause of errors in gitweb test sute difficult.
Modify the gitweb_run test subroutine to run test_debug itself in the
case of errors (and also remove "test_debug 'cat gitweb.log'" from
gitweb tests).
This makes it possible to run *gitweb tests* with --immediate ---debug
combination of options; also it makes gitweb tests to not output
spurious debug data that is not considered error.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like git clone --bare, build a .git directory but no
checked out files.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-By: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are four wildcard characters in p4. Files with these
characters can be added to p4 repos using the "-f" option.
They are stored in %xx notation, and when checked out, p4
converts them back to normal.
This patch does the same thing when importing into git,
converting the four special characters. Without this change,
the files appear with literal %xx in their names.
Be careful not to produce "*" in filenames on windows. That
will fail.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some p4 failures result in an error, but the info['code'] is not
set. These include a bad p4 executable, or a core dump from p4,
and other odd internal errors where p4 fails to generate proper
marshaled output.
Make sure the info key exists before using it to avoid a python
traceback.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We would allow rename detection to do copy detection even when asked
purely for renames. That confuses users, but more importantly it can
terminally confuse the recursive merge rename logic.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 86ac751 (Allow cloning an empty repository,
2009-01-23), doing:
git clone does-not-exist
has created does-not-exist as an empty repository. This was
an unintentional side effect of 86ac751. Even weirder,
doing:
git clone does-not-exist new-dir
_does_ fail, making this "feature" (if you want to consider
it such) broken. Let's detect this situation and explicitly
die. It's almost certainly not what the user intended.
This patch also adds two tests. One for the missing path
case, and one to confirm that a similar case, cloning a
non-repository directory, fails.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Mac OS X 10.5.0, test_terminal gets stuck reading from the pty
master every once in a while. To reproduce the problem:
perl -MIO::Pty -MFile::Copy -e '
for (my $i = 0;; $i++) {
my $master = new IO::Pty;
my $slave = $master->slave;
if (fork == 0) {
close $master or die "close: $!";
open STDOUT, ">&", $slave or die "dup2: $!";
close $slave or die "close: $!";
exec("echo", "hi", $i) or die "exec: $!";
}
close $slave or die "close: $!";
copy($master, \*STDOUT) or die "copy: $!";
close $master or die "close: $!";
wait;
}
'
It blocks after 7000 iterations or so in sysread(). The relevant
sysread() call is the second call by the parent, which presumably
executes before the child dies but after the parent has read all
output from there.
Since this is an intermitent problem, the quick check of terminal
support in lib-terminal doesn't catch it. Skip these tests on the Mac
for now.
Noticed-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add two test cases in t7406 to ensure that the --merge/--rebase options
are ignored for "git submodule update" with new modules. These test that
a simple checkout is performed instead.
Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, patch-id trips over our very own diff extension for marking
the absence of newline at EOF.
Fix it. (Ignore it, it's whitespace.)
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, patch-id trips over our very own output that marks the absence
of newline at EOF.
Expose this in a test.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a new branch using the --track option, we must make sure that
we don't try to set an upstream that does not make sense to follow (using
'git pull') or update (using 'git push'). The current code checks against
using HEAD as upstream (since tracking a symref doesn't make sense). However,
tracking a tag doesn't make sense either. Indeed, tracking _any_ ref that is
not a (local or remote) branch doesn't make sense, and should be disallowed.
This patch achieves this by checking that the ref we're trying to --track
resides within refs/heads/* or refs/remotes/*. This new check replaces the
previous check against HEAD.
A couple of testcases are also added, verifying that we cannot create
branches with tags as upstreams.
Finally, some selftests relying on using a non-branch as an upstream have
been reworked or removed:
- t6040: Reverse the meaning of two tests that depend on the ability to
use (lightweight and annotated) tags as upstreams. These two tests were
originally added in commits 1be570f and 57ffc5f, and this patch reverts the
intention of those two commits.
- t7201: Remove part of a test (introduced in 9188ed8) relying on a
non-branch as upstream.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since bb0a484 (mergetool: Skip autoresolved paths, 2010-08-17),
mergetool uses different ways of figuring out the list of files with
merge conflicts depending on whether rerere is active. If rerere is
active, mergetool will use 'git rerere status' to list the files with
remaining conflicts. However, the output from that command does not
list conflicts of types that rerere does not handle, such as
modify/remove conflicts.
Another problem with solely relying on the output from 'git rerere
status' is that, for new conflicts that are not yet known to rerere,
the output from the command will list the files even after adding them
to the index. This means that if the conflicts in some files have been
resolved and 'git mergetool' is run again, it will ask the user
something like the following for each of those files.
file1: file does not need merging
Continue merging other unresolved paths (y/n) ?
Solve both of these problems by replacing the call to 'git rerere
status' with a call to the new 'git rerere remaining' that was
introduced in the previous commit.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a merge is stopped due to conflicts or --no-commit, the
subsequent commit calls the prepare-commit-msg hook. However,
it is not called after a clean merge. Fix this inconsistency
by invoking the hook after clean merges as well.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
*.c part for matches with '<[A-Z]+>' (and affected test).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds tests where an untracked file and an untracked symlink are in the
way where a directory should be created by 'git checkout'. Commit b1735b1a
(do not overwrite files in leading path, 2010-12-14) fixed the case where
a file is in the way, but the untracked symlink is still removed silently.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When command_input_pipe and command_output_pipe are used as a
method of a Git::repository instance, they eventually call into
_cmd_exec method that sets up the execution environment such as
GIT_DIR, GIT_WORK_TREE environment variables and the current
working directory in the child process that interacts with the
repository.
command_bidi_pipe however didn't expect to be called as such, and
lacked all these set-up. Because of this, a program that did this
did not work as expected:
my $repo = Git->repository(Directory => '/some/where/else');
my ($pid, $in, $out, $ctx) =
$repo->command_bidi_pipe(qw(hash-object -w --stdin-paths));
This patch refactors the _cmd_exec into _setup_git_cmd_env that
sets up the execution environment, and makes _cmd_exec and
command_bidi_pipe to use it.
Note that unlike _cmd_exec that execv's a git command as an
external process, command_bidi_pipe is called from the main line
of control, and the execution environment needs to be restored
after open2() does its magic.
Signed-off-by: Masatake Osanai <unpush@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Here is a 'feature' command for streams to use to require support for
the notemodify (N) command.
When the 'feature' facility was introduced (v1.7.0-rc0~95^2~4,
2009-12-04), the notes import feature was old news (v1.6.6-rc0~21^2~8,
2009-10-09) and it was not obvious it deserved to be a named feature.
But now that is clear, since all major non-git fast-import backends
lack support for it.
Details: on git version with this patch applied, any "feature notes"
command in the features/options section at the beginning of a stream
will be treated as a no-op. On fast-import implementations without
the feature (and older git versions), the command instead errors out
with a message like
This version of fast-import does not support feature notes.
So by declaring use of notes at the beginning of a stream, frontends
can avoid wasting time and other resources when the backend does not
support notes. (This would be especially important for backends that
do not support rewinding history after a botched import.)
Improved-by: Thomas Rast <trast@student.ethz.ch>
Improved-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For example, one might use this when making a temporary merge to
test that two topics work well together.
Patch by Junio, with tests from Jeff King.
[jn: with some extra checks for bogus commandline usage]
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commits, trees and tags have structure. Don't let users feed git
with malformed ones. Sooner or later git will die() when
encountering them.
Note that this patch does not check semantics. A tree that points
to non-existent objects is perfectly OK (and should be so, users
may choose to add commit first, then its associated tree for example).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --cached" (without revision) used to mean "git diff --cached
HEAD" (i.e. the user was too lazy to type HEAD). This "correctly"
failed when there was no commit yet. But was that correctness useful?
This patch changes the definition of what particular command means.
It is a request to show what _would_ be committed without further "git
add". The internal implementation is the same "git diff --cached HEAD"
when HEAD exists, but when there is no commit yet, it compares the index
with an empty tree object to achieve the desired result.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test case verifies that filemode-only patches work as expected. Help
systems where "test -x" does not work by applying the test patch also to
the index, where the effects can be verified even on such systems.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first test did not run on msysGit due to the SYMLINKS constraint and
so subsequent tests failed because the test repository was not initialized.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier e10cb0f (tree_entry_interesting(): support wildcard matching,
2010-12-15) and b3d4b34 (tree_entry_interesting(): optimize wildcard
matching when base is matched, 2010-12-15) added tests for globbing
support for diff-tree plumbing. This is a follow-up to update the test
for revision traversal and path pruning machinery for the same topic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If base is already matched, skip that part when calling
fnmatch(). This happens quite often if users start a command from
worktree's subdirectory and prefix is usually prepended to all
pathspecs.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
never_interesting optimization is disabled if there is any wildcard
pathspec, even if it only matches exactly on trees.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a typo where the "git config" arguments "-f" and "--unset" were
swapped leading to the creation of a "--unset" file.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
rebase -i: clarify in-editor documentation of "exec"
tests: sanitize more git environment variables
fast-import: treat filemodify with empty tree as delete
rebase: give a better error message for bogus branch
rebase: use explicit "--" with checkout
Conflicts:
t/t9300-fast-import.sh
These variables should generally not be set in one's
environment, but they do get set by rebase, which means
doing an interactive rebase like:
pick abcd1234 foo
exec make test
will cause false negatives in the test suite.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normal git processes do not allow one to build a tree with an empty
subtree entry without trying hard at it. This is in keeping with the
general UI philosophy: git tracks content, not empty directories.
v1.7.3-rc0~75^2 (2010-06-30) changed that by making it easy to include
an empty subtree in fast-import's active commit:
M 040000 4b825dc642 subdir
One can trigger this by reading an empty tree (for example, the tree
corresponding to an empty root commit) and trying to move it to a
subtree. It is better and more closely analogous to 'git read-tree
--prefix' to treat such commands as requests to remove the subtree.
Noticed-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/setup-fixes:
t1510: fix typo in the comment of a test
Documentation updates for 'GIT_WORK_TREE without GIT_DIR' historical usecase
Subject: setup: officially support --work-tree without --git-dir
tests: compress the setup tests
tests: cosmetic improvements to the repo-setup test
t/README: hint about using $(pwd) rather than $PWD in tests
Fix expected values of setup tests on Windows
The original intention of --work-tree was to allow people to work in a
subdirectory of their working tree that does not have an embedded .git
directory. Because their working tree, which their $cwd was in, did not
have an embedded .git, they needed to use $GIT_DIR to specify where it is,
and because this meant there was no way to discover where the root level
of the working tree was, so we needed to add $GIT_WORK_TREE to tell git
where it was.
However, this facility has long been (mis)used by people's scripts to
start git from a working tree _with_ an embedded .git directory, let git
find .git directory, and then pretend as if an unrelated directory were
the associated working tree of the .git directory found by the discovery
process. It happens to work in simple cases, and is not worth causing
"regression" to these scripts.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New test helpers:
- setup_repo, to initialize a repository or gitfile pointing to a
repository, with core.bare and core.worktree set as specified;
- try_case, to run setup from a given directory and validate the
result, with GIT_DIR and GIT_WORK_TREE set as specified;
- try_repo, to initialize a repository and call "try_case" from the
toplevel and a subdirectory;
- run_wt_tests, to run a battery of tests that check for sane
behavior when GIT_WORK_TREE is set to various positions relative to
the .git dir and cwd.
Use these helpers to make the test shorter, less repetitive, and (one
hopes) easier to understand and modify.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give an overview in "sh t1510-repo-setup.sh --help" output.
Waste some vertical and horizontal space for clearer code.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rj/maint-test-fixes:
t9501-*.sh: Fix a test failure on Cygwin
lib-git-svn.sh: Add check for mis-configured web server variables
lib-git-svn.sh: Avoid setting web server variables unnecessarily
t9142: Move call to start_httpd into the setup test
t3600-rm.sh: Don't pass a non-existent prereq to test #15
Rearrange code to be easier to browse:
- first data
- then functions
- then test assertions
Mark up inline test vectors as
cat >vector <<-\EOF
data
data
EOF
for visual scannability. Use words like "set up" for tests that set
up for other tests, to make it obvious which tests are safe to skip.
Use repeated function calls instead of a loop for the
language-specific tests, so the invocations can be easily tweaked
individually (for example if one starts to fail).
This means if you add a new subdirectory to t4034/, it will not be
automatically used. I think that's worth it for the added
explicitness.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The builtin word regexes should be tested with some simple examples
against simple issues. Do this in bulk.
Mainly due to a lack of language knowledge and inspiration, most of
the test cases (cpp, csharp, java, objc, pascal, php, python, ruby)
are directly based off a C operator precedence table to verify that
all operators are split correctly. This means that they are probably
incomplete or inaccurate except for 'cpp' itself.
Still, they are good enough to already have uncovered a typo in the
python and ruby patterns.
'fortran' is based on my anecdotal knowledge of the DO10I parsing
rules, and thus probably useless. The rest (bibtex, html, tex) are an
ad-hoc test of what I consider important splits in those languages.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a frontend uses a marks file to ensure its state persists between
runs, it may represent "clean slate" when bootstrapping with "no marks
yet". In such a case, feeding the last state with --import-marks and
saving the state after the current run with --export-marks would be a
natural thing to do.
The --import-marks option however errors out when the specified marks file
doesn't exist; this makes bootstrapping a bit difficult. The location of
the marks file becomes backend-dependent when --relative-marks is in
effect, and the frontend cannot check for the existence of the file in
such a case.
The --import-marks-if-exists option does the same thing as --import-marks
but does not flag an error if the named file does not exist yet to help
these frontends.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rj/test-fixes:
t4135-*.sh: Skip the "backslash" tests on cygwin
t3032-*.sh: Do not strip CR from line-endings while grepping on MinGW
t3032-*.sh: Pass the -b (--binary) option to sed on cygwin
t6038-*.sh: Pass the -b (--binary) option to sed on cygwin
Conflicts:
t/t3032-merge-recursive-options.sh
