The little helper write_or_die() won't come back with bad news about
full disks or broken pipes. It either succeeds or terminates the
program, making additional error handling unnecessary.
This patch adds the new function and uses it to replace two similar
ones (the one in tar-tree originally has been copied from cat-file
btw.). I chose to add the fd parameter which both lacked to make
write_or_die() just as flexible as write() and thus suitable for
lib-ification.
There is a regression: error messages emitted by this function don't
show the program name, while the replaced two functions did. That's
acceptable, I think; a lot of other functions do the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/racy:
Remove the "delay writing to avoid runtime penalty of racy-git avoidance"
Add check program "git-check-racy"
Documentation/technical/racy-git.txt
avoid nanosleep(2)
From 31e4de9f22a3b17d4ad0ac800132e4e1a0a15006 Mon Sep 17 00:00:00 2001
From: David Rientjes <rientjes@google.com>
Date: Tue, 15 Aug 2006 11:43:04 -0700
Subject: [PATCH] gitweb: Show project's git URL on summary page
Add support for showing multiple clone/fetch git URLs for project on
a summary page. URL for project is created from base URL and project
name.
For example for XMMS2 project (xmms.se) the git base URL would be
git://git.xmms.se/xmms2.
With corrections from David Rientjes <rientjes@google.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This will help counting the racily clean paths, but it should be
useless for daily use. Do not even enable it in the makefile.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
finish_connect(): thinkofix
git-mv: succeed even if source is a prefix of destination
Solaris does not support C99 format strings before version 10
- Add the CFLAGS variable to config.mak.in to override the Makefile's
default, which is gcc-specific and won't work with Sun CC.
- Prefer "cc" over "gcc", because Pasky's Git.pm will not compile with gcc
on Solaris at all. On Linux and the free BSDs "cc" is linked to "gcc"
anyway.
- Set correct flag to generate position-independent code.
- Add "-xO3" (= use default optimization level) to CFLAGS.
Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (166 commits)
git-apply --binary: clean up and prepare for --reverse
Fix detection of ipv6 on Solaris
Look for sockaddr_storage in sys/socket.h
Solaris has strlcpy() at least since version 8
git-apply --reverse: simplify reverse option.
t4116 apply --reverse test
Make sha1flush void and remove conditional return.
Make upload_pack void and remove conditional return.
Make track_tree_refs void.
Make pack_objects void.
Make fsck_dir void.
Make checkout_all void.
Make show_entry void
Make pprint_tag void and cleans up call in cmd_cat_file.
Remove combine-diff.c::uninteresting()
read-cache.c cleanup
http-push.c cleanup
diff.c cleanup
builtin-push.c cleanup
builtin-grep.c cleanup
...
I've always found difficult to figure out git URL for clone from
gitweb URL because git:// and http:// are different on many site
including kernel.org.
I've found this enhancement at http://dev.laptop.org/git when I was on
git channel, and thought that it'd be nice if all public gitweb site
show it's git URL on its page.
This patch allow us to change the home link string. The current
default is "projects" as we all see on gitweb now.
ie. kernel.org might set this variable to "git://git.kernel.org/pub/scm/"
Signed-off-by: Yasushi SHOJI <yashi@atmark-techno.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Convert git-verify-pack to a builtin command. Also rename ac to argc
and av to argv for consistancy.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When configure is interrupted in the middle it leaves
config.mak.append behind. Add it to .gitignore and make sure
$(MAKE) clean removes it.
Also earlier .gitignore listed config.mak.in which is a tracked
file. Fix it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
While at it fill git version information in configure.ac
configure target needs autoconf, of course.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the build procedure for built-in commands by:
- generating mostly redundant definition of BUILT_INS from
BUILTIN_OBJS in the Makefile,
- renaming a few files to make the above possible, and
- sorting the built-in command table in git.c.
It might be a good idea to binary search (or perfect hash) the built-in
command table, but that can be done later when somebody feels like.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes it easier to run gitweb/gitweb.perl without token substitution.
Using @@ makes Perl emit "unintended interpolation" warnings.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Configuration will first be taken from variables inside the gitweb.cgi
script, which in turn come from the Makefile. Afterwards, the contents of
GITWEB_CONFIG are read, overriding the builtin defaults.
This should eliminate the need for editing the gitweb script at all. Users
should edit the Makefile and/or add a config file.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The NO_C99_FORMAT macro allows compilers that lack support for the
ll,hh,j,z,t size specifiers (eg. gcc 2.95.2) to adapt the code to avoid
runtime errors in the formatted IO functions.
Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Do not use $(call) for 'shell quoting' paths, and pass DESTDIR down
to the templates makefile.
[jc: we have fixed the main Makefile long time ago, but somehow
forgot to apply the same fix to templates Makefile.]
Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use the normal web server instead of the CGI to provide the git logo,
just like the gitweb.css.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Generate gitweb/gitweb.cgi to reduce the need to patch gitweb.cgi
by the end user. The GIT installation directory is already known
by the Makefile, and can be inserted directly into gitweb.
All other gitweb configuration parameters can now be specified by
providing GITWEB_* variables while building GIT. These are described
in gitweb/README.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* js/read-tree: (107 commits)
read-tree: move merge functions to the library
read-trees: refactor the unpack_trees() part
tar-tree: illustrate an obscure feature better
git.c: allow alias expansion without a git directory
setup_git_directory_gently: do not barf when GIT_DIR is given.
Build on Debian GNU/kFreeBSD
Call setup_git_directory() much earlier
Call setup_git_directory() early
Display an error from update-ref if target ref name is invalid.
Fix http-fetch
t4103: fix binary patch application test.
git-apply -R: binary patches are irreversible for now.
Teach git-apply about '-R'
Makefile: ssh-pull.o depends on ssh-fetch.c
log and diff family: honor config even from subdirectories
git-reset: detect update-ref error and report it.
lost-found: use fsck-objects --full
Teach git-http-fetch the --stdin switch
Teach git-local-fetch the --stdin switch
Make pull() support fetching multiple targets at once
...
Basically, the options are passed by a struct unpack_trees_options now.
That's all.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Patch from Petr Salinger to make the build process detect and support the
Debian GNU/kFreeBSD architecture, see
http://bugs.debian.org/380209
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jn/make:
Set datarootdir in config.mak.in
Quote all calls to GIT_CONF_APPEND_LINE
Typofix in configure.ac comment.
configure.ac vertical whitespace usage cleanup
autoconf: Checks for some programs
autoconf: Checks for libraries
autoconf: Checks for some library functions.
autoconf: Checks for typedefs, structures, and compiler characteristics.
autoconf: Preparing the way for autodetection
Copy description of build configuration variables to configure.ac
Teach make clean about configure and autoconf
autoconf: Use autoconf to write installation directories to config.mak.autogen
This also moves add_file_to_index() to read-cache.c. Oh, and while
touching builtin-add.c, it also removes a duplicate git_config() call.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not everybody installs git to /usr/bin/git.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It may be desirable for the compiler to disable linking against Fink
or DarwinPorts, especially if both are installed on the system and
the user wants GIT to be linked specifically to only one of them.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is just an update for people being interested. Alex and me were
busy with that project for a few days now. While it has progressed nicely,
there are quite a couple TODOs in merge-recursive.c, just search for "TODO".
For impatient people: yes, it passes all the tests, and yes, according
to the evil test Alex did, it is faster than the Python script.
But no, it is not yet finished. Biggest points are:
- there are still three external calls
- in the end, it should not be necessary to write the index more than once
(just before exiting)
- a lot of things can be refactored to make the code easier and shorter
BTW we cannot just plug in git-merge-tree yet, because git-merge-tree
does not handle renames at all.
This patch is meant for testing, and as such,
- it compile the program to git-merge-recur
- it adjusts the scripts and tests to use git-merge-recur instead of
git-merge-recursive
- it provides "TEST", a script to execute the tests regarding -recursive
- it inlines the changes to read-cache.c (read_cache_from(), discard_cache()
and refresh_cache_entry())
Brought to you by Alex Riesen and Dscho
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lt/merge-tree:
Improved three-way blob merging code
Prepare "git-merge-tree" for future work
xdiff: generate "anti-diffs" aka what is common to two files
* ew/svn:
Fix some doubled word typos
Typofix in Makefile comment.
Makefile: export NO_SVN_TESTS
git-svn: migrate out of contrib (follow-up)
git-svn: migrate out of contrib
This actually removes the objects to be pruned, unless you specify "-n"
(at which point it will just tell you which files it would prune).
This doesn't do the pack-file pruning that the shell-script used to do,
but if somebody really wants to, they could add it easily enough. I wonder
how useful it is, though, considering that "git repack -a -d" is just a
lot more efficient and generates a better end result.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Traditionally 'i' and 'a' commands to sed have been unfriendly
with make, primarily because different make implementations did
unexpected things to backslashes at the end of lines. So work
it around by not using 'i' command.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some GIT's shell script are using bare 'perl' for perl invocation.
Use @@PERL@@ symbol and replace it with PERL_PATH_SQ everywhere.
Signed-off-by: Michal Rokos <michal.rokos@nextsoft.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some implementations of sed (like HP-UX one) mandate a space between 'r'
and 'rfile'.
Signed-off-by: Michal Rokos <michal.rokos@nextsoft.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Without this patch, it really is not sufficient to define NO_SVN_TESTS
in config.mak or the Makefile.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Allow NO_SVN_TESTS to be defined to skip git-svn tests. These
tests are time-consuming due to SVN being slow, and even more so
if SVN Perl libraries are not available.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* ew/instaweb:
instaweb: fix unportable ';' usage in sed
Makefile: replace ugly and unportable sed invocation
Add git-instaweb, instantly browse the working repo with gitweb
gitweb: Declare global variables with "our"
gitweb: Enable tree (directory) history display
gitweb: optimize per-file history generation
* jc/sha1:
A better-scheduled PPC SHA-1 implementation.
test-sha1: test hashing large buffer
Makefile: add framework to verify and bench sha1 implementations.
This makes the Git perl scripts check $GITPERLLIB instead of
$RUNNING_GIT_TESTS, which makes more sense if you are setting up your shell
environment to use a non-installed Git instance.
It also weeds out the @INC munging from the individual scripts and makes
Makefile add it during the .perl files processing, so that we can change
just a single place when we modify this shared logic. It looks ugly in the
scripts, too. ;-)
And instead of doing arcane things with the @INC array, we just do 'use lib'
instead, which is essentialy the same thing anyway.
I first want to do three separate patches but it turned out that it's quite
a lot neater when bundled together, so I hope it's ok.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Although our "git-%$X:" implicit target had dependency on
$(GITLIBS) which included xdiff/lib.a, git-http-{fetch,push} had
their own building rules and with an obsolete dependency on
$(LIB_FILES). Update the rules to depend on $(GITLIBS), to make
parallel build work correctly.
Signed-off-by: Junio C Hamano <junkio@cox.net>
On some platforms, Git.xs refuses to link with the rest of git
unless the latter is compiled with -fPIC, and we have USE_PIC
control in the Makefile for the user to set it. At least we
know x86-64 is such, so set it in the Makefile.
The original suggestion by Marco Roeland conservatively did this
only for Linux x86-64, but let's keep the Makefile simple and if
it breaks somebody let them holler.
Signed-off-by: Junio C Hamano <junkio@cox.net>
dst_ on #git reported that on Solaris 9, Perl was built by Sun CC
and perl/ is therefore being built with it as well, while the rest
of Git is built with gcc. The problem (the first one visible, anyway)
is that we passed perl/ even various gcc-specific options. This
separates those to a special variable.
This is not really meant for an application yet since it's not clear
if it will alone help anything.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Solaris' /bin/sh does not support $( )-style command substitution
Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
- We passed our own *.a archives as LIBS to the submake that runs
in perl/; separate LIBS and EXTLIBS and pass the latter which
tells what the system libraries are used.
- The quoting of preprocesor symbol definitions passed down to
perl/ submake was loose and we lost double quotes around
include directives. Use *_SQ to quote them properly.
- The installation location of perl/ submake is not
architecture neutral anymore, so use SITEARCH instead of
SITELIB.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When perl/Makefile is stale with respect to perl/Makefile.PL, it
prevents "make clean" from completing which is quite irritating.
Fix it by calling subdirectory make clean twice as needed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch introduces a very basic and barebone Git.pm module
with a sketch of how the generic interface would look like;
most functions are missing, but this should give some good base.
I will continue expanding it.
Most desirable now is more careful error reporting, generic_in() for feeding
input to Git commands and the repository() constructor doing some poking
with git-rev-parse to get the git directory and subdirectory prefix.
Those three are basically the prerequisities for converting git-mv.
I will send them as follow-ups to this patch.
Currently Git.pm just wraps up exec()s of Git commands, but even that
is not trivial to get right and various Git perl scripts do it in
various inconsistent ways. In addition to Git.pm, there is now also
Git.xs which provides barebone Git.xs for directly interfacing with
libgit.a, and as an example providing the hash_object() function using
libgit.
This adds the Git module, integrates it to the build system and as
an example converts the git-fmt-merge-msg.perl script to it (the result
is not very impressive since its advantage is not quite apparent in this
one, but I just picked up the simplest Git user around).
Compared to v3, only very minor things were fixed in this patch (some
whitespaces, a missing export, tiny bug in git-fmt-merge-msg.perl);
at first I wanted to post them as a separate patch but since this
is still only in pu, I decided that it will be cleaner to just resend
the patch.
My current working state is available all the time at
http://pasky.or.cz/~xpasky/git-perl/Git.pm
and an irregularily updated API documentation is at
http://pasky.or.cz/~xpasky/git-perl/Git.html
Many thanks to Jakub Narebski, Junio and others for their feedback.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is beginning of patch series introducing installation configuration
using autoconf (and no other autotools) to git. The idea is to generate
config.mak.autogen using ./configure (generated from configure.ac by running
autoconf) from config.mak.in, so one can use autoconf as an _alternative_ to
ordinary Makefile, and creating one's own config.mak. Local settings in
config.mak override generated settings in config.mak.autogen
This patch includes minimal configure.ac and config.mak.in, so one can set
installation directories using autoconf generated ./configure script
e.g. ./configure --prefix=/usr
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I got tired of having to configure gitweb for every repository
I work on. I sometimes prefer gitweb to standard GUIs like gitk
or gitview; so this lets me automatically configure gitweb to
browse my working repository and also opens my browser to it.
Updates from the original patch:
Added Apache/mod_perl2 compatibility if Dennis Stosberg's gitweb
has been applied, too: <20060621130708.Gcbc6e5c@leonov.stosberg.net>
General cleanups in shell code usage.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch renames man1 and man7 variables to man1dir and man7dir,
according to "Makefile Conventions: Variables for Installation
Directories" in make.info of GNU Make.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Makefiles in subdirectories now use existing value of INSTALL, bindir,
mandir if it is set, allowing those to be set in main Makefile or in
included config.mak. Main Makefile exports variables which it sets.
Accidentally it renames bin to bindir in Documentation/Makefile
(should be bindir from start, but is unused, perhaps to be removed).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fleshes out the code that generates a three-way merge of a set of
blobs.
It still actually does the three-way merge using an external executable
(ie just calling "merge"), but the interfaces have been cleaned up a lot
and are now fully based on the 'mmfile_t' interface, so if libxdiff were
to ever grow a compatible three-way-merge, it could probably be directly
plugged in.
It also uses the previous XDL_EMIT_COMMON functionality extension to
libxdiff to generate a made-up base file for the merge for the case where
no base file previously existed. This should be equivalent to what we
currently do in git-merge-one-file.sh:
diff -u -La/$orig -Lb/$orig $orig $src2 | git-apply --no-add
except it should be much simpler and can be done using the direct libxdiff
interfaces.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the use of safe_strncpy() even more. Since it has the
same semantics as strlcpy() use this name instead. Also move the
definition from inside path.c to its own file compat/strlcpy.c, and use
it conditionally at compile time, since some platforms already has
strlcpy(). It's included in the same way as compat/setenv.c.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* js/lsfix:
Initialize lock_file struct to all zero.
Make git-update-ref a builtin
Make git-update-index a builtin
Make git-stripspace a builtin
Make git-mailinfo a builtin
Make git-mailsplit a builtin
Make git-write-tree a builtin
* jc/upload-corrupt:
daemon: send stderr to /dev/null instead of closing.
upload-pack/fetch-pack: support side-band communication
Retire git-clone-pack
upload-pack: prepare for sideband message support.
upload-pack: avoid sending an incomplete pack upon failure
Before this patch, -DDEFAULT_GIT_TEMPLATE_DIR was passed on compilation
command line to all and every .c file compiled. In fact the macro
is used by only one .c file, and unused by all other .c files.
Remove -DDEFAULT_GIT_TEMPLATE_DIR where unused. Follow the example of
exec_cmd.o. Pass -DDEFAULT_GIT_TEMPLATE_DIR only where actually used.
Signed-off-by: Yakov Lerner <iler.ml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The program is not used by git-clone since git-fetch-pack was extended
to allow its caller do what git-clone-pack alone did, and git-clone was
updated to use it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This creates a simple specialized object allocator for basic
objects.
This avoids wasting space with malloc overhead (metadata and
extra alignment), since the specialized allocator knows the
alignment, and that objects, once allocated, are never freed.
It also allows us to track some basic statistics about object
allocations. For example, for the mozilla import, it shows
object usage as follows:
blobs: 627629 (14710 kB)
trees: 1119035 (34969 kB)
commits: 196423 (8440 kB)
tags: 1336 (46 kB)
and the simpler allocator shaves off about 2.5% off the memory
footprint off a "git-rev-list --all --objects", and is a bit
faster too.
[ Side note: this concludes the series of "save memory in object storage".
The thing is, there simply isn't much more to be saved on the objects.
Doing "git-rev-list --all --objects" on the mozilla archive has a final
total RSS of 131498 pages for me: that's about 513MB. Of that, the
object overhead is now just 56MB, the rest is going somewhere else (put
another way: the fact that this patch shaves off 2.5% of the total
memory overhead, considering that objects are now not much more than 10%
of the total shows how big the wasted space really was: this makes
object allocations much more memory- and time-efficient).
I haven't looked at where the rest is, but I suspect the bulk of it is
just the pack-file loading. It may be that we should pack the tree
objects separately from the blob objects: for git-rev-list --objects, we
don't actually ever need to even look at the blobs, but since trees and
blobs are interspersed in the pack-file, we end up not being dense in
the tree accesses, so we end up looking at more pages than we strictly
need to.
So with a 535MB pack-file, it's entirely possible - even likely - that
most of the remaining RSS is just the mmap of the pack-file itself. We
don't need to map in _all_ of it, but we do end up mapping a fair
amount. ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This shrinks "struct object" to the absolutely minimal size possible.
It now contains /only/ the object flags and the SHA1 hash name of the
object.
The "refs" field, which is really needed only for fsck, is maintained in
a separate hashed lookup-table, allowing all normal users to totally
ignore it.
This helps memory usage, although not as much as I hoped: it looks like
the allocation overhead of malloc (and the alignment constraints in
particular) means that while the structure size shrinks, the actual
allocation overhead mostly does not.
[ That said: memory usage is actually down, but not as much as it should
be: I suspect just one of the object types actually ended up shrinking
its effective allocation size.
To get to the next level, we probably need specialized allocators that
don't pad the allocation more than necessary. ]
The separation makes for some code cleanup, though, and makes the ref
tracking that fsck wants a clearly separate thing.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-tar-tree adds an extended pax header to archives if its first
parameter points to a commit. It confuses older tars and isn't
very useful in the case of git anyway, so stop doing it.
Idea: Junio, implementation: Junio. I just wrote it up. :-)
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Detect changed prefix and/or changed build flags in the middle
of the build (or between 'make' and 'make install'), and if change
is detected, make sure all objects are compiled with same build
flags and same prefix, thus avoiding inconsistent/broken build.
[jc: removed otherwise unnecessary Makefile target to test the
change this patch introduces. ]
Signed-off-by: Yakov Lerner <iler.ml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
By being an internal command git-get-commit-id can make use of
struct ustar_header and other stuff and stops wasting precious
disk space.
Note: I recycled one of the two "tar-tree" entries instead of
splitting that cleanup into a separate patch.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The framework to create lockfiles that are removed at exit is
first used to reliably write the index file, but it is
applicable to other things, so stop calling it "cache_file".
This also rewords a few remaining error message that called the
index file "cache file".
Signed-off-by: Junio C Hamano <junkio@cox.net>
This ifdef's out more functions that are not used while !USE_MULTI
in http code. Also the dependency of http related objects on http.h
header file was missing in the Makefile.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/cache-tree: (26 commits)
builtin-rm: squelch compiler warnings.
git-write-tree writes garbage on sparc64
Fix crash when reading the empty tree
fsck-objects: do not segfault on missing tree in cache-tree
cache-tree: a bit more debugging support.
read-tree: invalidate cache-tree entry when a new index entry is added.
Fix test-dump-cache-tree in one-tree disappeared case.
fsck-objects: mark objects reachable from cache-tree
cache-tree: replace a sscanf() by two strtol() calls
cache-tree.c: typefix
test-dump-cache-tree: validate the cached data as well.
cache_tree_update: give an option to update cache-tree only.
read-tree: teach 1-way merege and plain read to prime cache-tree.
read-tree: teach 1 and 2 way merges about cache-tree.
update-index: when --unresolve, smudge the relevant cache-tree entries.
test-dump-cache-tree: report number of subtrees.
cache-tree: sort the subtree entries.
Teach fsck-objects about cache-tree.
index: make the index file format extensible.
cache-tree: protect against "git prune".
...
Conflicts:
Makefile, builtin.h, git.c: resolved the same way as in next.
Otherwise, if make is suspended, or killed with prejudice, or if the
system crashes, you could be left with an up-to-date, yet corrupt,
generated file.
I left off the `clean' addition, because I believe "make clean" should
not remove wildcard patterns like "*+", on the off-chance that someone
uses names like that for files they care about. Besides, in practice,
those temporary files are left behind so rarely that they're not a bother,
and they're removed again as part of the next build.
[jc: sign-off?]
Signed-off-by: Junio C Hamano <junkio@cox.net>
As both DESTDIR and the prefix are supposed to be absolute pathnames
they can simply be concatenated without an extra / (like in the main Makefile).
The extra slash may even break installation on Windows.
[jc: adjusted an earlier workaround for this problem in the dist-doc
target in the main Makefile as well. ]
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes "git format-patch" a built-in.
* js/fmt-patch:
git-rebase: use canonical A..B syntax to format-patch
git-format-patch: now built-in.
fmt-patch: Support --attach
fmt-patch: understand old <his> notation
Teach fmt-patch about --keep-subject
Teach fmt-patch about --numbered
fmt-patch: implement -o <dir>
fmt-patch: output file names to stdout
Teach fmt-patch to write individual files.
Use RFC2822 dates from "git fmt-patch".
git-fmt-patch: thinkofix to show [PATCH] properly.
rename internal format-patch wip
Minor tweak on subject line in --pretty=email
Tentative built-in format-patch.
This makes 'git add' and 'git rm' built-ins.
* lt/dirwalk:
Add builtin "git rm" command
Move pathspec matching from builtin-add.c into dir.c
Prevent bogus paths from being added to the index.
builtin-add: fix unmatched pathspec warnings.
Remove old "git-add.sh" remnants
builtin-add: warn on unmatched pathspecs
Do "git add" as a builtin
Clean up git-ls-file directory walking library interface
libify git-ls-files directory traversal
Moving "git-cmd" commands out of the path and into a special
git exec path, should include the builtins.
[jc: fixed the case where bindir == gitexecdir - ln -f fails
with a complaint that src and dst are the same, likewise for
the fallback cp.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
For systems which lack inet_ntop(), this adds compat/inet_ntop.c,
and related build constant, NO_INET_NTOP. Older Cygwin(s) lack
inet_ntop().
Signed-off-by: Yakov Lerner <iler.ml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This commit is what this branch is all about. It records the
evil merge needed to adjust built-in git-add and git-rm for
the cache-tree extension.
* lt/dirwalk:
Add builtin "git rm" command
Move pathspec matching from builtin-add.c into dir.c
Prevent bogus paths from being added to the index.
builtin-add: fix unmatched pathspec warnings.
Remove old "git-add.sh" remnants
builtin-add: warn on unmatched pathspecs
Do "git add" as a builtin
Clean up git-ls-file directory walking library interface
libify git-ls-files directory traversal
Conflicts:
Makefile
builtin.h
git.c
update-index.c
* jc/cache-tree: (24 commits)
Fix crash when reading the empty tree
fsck-objects: do not segfault on missing tree in cache-tree
cache-tree: a bit more debugging support.
read-tree: invalidate cache-tree entry when a new index entry is added.
Fix test-dump-cache-tree in one-tree disappeared case.
fsck-objects: mark objects reachable from cache-tree
cache-tree: replace a sscanf() by two strtol() calls
cache-tree.c: typefix
test-dump-cache-tree: validate the cached data as well.
cache_tree_update: give an option to update cache-tree only.
read-tree: teach 1-way merege and plain read to prime cache-tree.
read-tree: teach 1 and 2 way merges about cache-tree.
update-index: when --unresolve, smudge the relevant cache-tree entries.
test-dump-cache-tree: report number of subtrees.
cache-tree: sort the subtree entries.
Teach fsck-objects about cache-tree.
index: make the index file format extensible.
cache-tree: protect against "git prune".
Add test-dump-cache-tree
Use cache-tree in update-index.
...
This makes tar-tree a built-in. As an added bonus, you can now
say:
git tar-tree --remote=remote-repository <ent> [<base>]
This does not work with git-daemon yet, but should work with
localhost and git over ssh transports.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes semantics very subtly, because it adds a new atomicity
guarantee.
In particular, if you "git rm" several files, it will now do all or
nothing. The old shell-script really looped over the removed files one by
one, and would basically randomly fail in the middle if "-f" was used and
one of the files didn't exist in the working directory.
This C builtin one will not re-write the index after each remove, but
instead remove all files at once. However, that means that if "-f" is used
(to also force removal of the file from the working directory), and some
files have already been removed from the workspace, it won't stop in the
middle in some half-way state like the old one did.
So what happens is that if the _first_ file fails to be removed with "-f",
we abort the whole "git rm". But once we've started removing, we don't
leave anything half done. If some of the other files don't exist, we'll
just ignore errors of removal from the working tree.
This is only an issue with "-f", of course.
I think the new behaviour is strictly an improvement, but perhaps more
importantly, it is _different_. As a special case, the semantics are
identical for the single-file case (which is the only one our test-suite
seems to test).
The other question is what to do with leading directories. The old "git
rm" script didn't do anything, which is somewhat inconsistent. This one
will actually clean up directories that have become empty as a result of
removing the last file, but maybe we want to have a flag to decide the
behaviour?
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
c3c8835fbb broke the default template
location which is in builtin-init-db.o, by not supplying the
compilation-time constant to the right build commands.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Basically this just renames init-db.c to builtin-init-db.c and makes
some strings const.
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Importing a quilt patch series into git is not very difficult
but parsing the patch descriptions and all of the other
minutia take a bit of effort to get right, so this automates it.
Since git and quilt complement each other it makes sense
to make it easy to go back and forth between the two.
If a patch is encountered that it cannot derive the author
from the user is asked.
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: rewrote by stealing from what I run to update html and
man branches automatically]
Signed-off-by: Tilman Sauerbeck <tilman@code-monkey.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This was surprisingly easy. The diff is truly minimal: rename "main()" to
"cmd_rev_list()" in rev-list.c, and rename the whole file to reflect its
new built-in status.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
First try. Let's see how well this works.
In many ways, the hard parts of "git commit" are not so different from
this, and a builtin commit would share a lot of the code, I think.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This moves the core directory traversal and filename exclusion logic
into the general git library, making it available for other users
directly.
If we ever want to do "git commit" or "git add" as a built-in (and we
do), we want to be able to handle most of git-ls-files as a library.
NOTE! Not all of git-ls-files is libified by this. The index matching
and pathspec prefix calculation is still in ls-files.c, but this is a
big part of it.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/grep: (22 commits)
Fix silly typo in new builtin grep
builtin-grep: unparse more command line options.
builtin-grep: use external grep when we can take advantage of it
builtin-grep: -F (--fixed-strings)
builtin-grep: -w fix
builtin-grep: typofix
builtin-grep: tighten argument parsing.
builtin-grep: documentation
Teach -f <file> option to builtin-grep.
builtin-grep: -L (--files-without-match).
builtin-grep: binary files -a and -I
builtin-grep: terminate correctly at EOF
builtin-grep: tighten path wildcard vs tree traversal.
builtin-grep: support -w (--word-regexp).
builtin-grep: support -c (--count).
builtin-grep: allow more than one patterns.
builtin-grep: allow -<n> and -[ABC]<n> notation for context lines.
builtin-grep: printf %.*s length is int, not ptrdiff_t.
builtin-grep: do not use setup_revisions()
builtin-grep: support '-l' option.
...
* fix:
Fix pack-index issue on 64-bit platforms a bit more portably.
Install git-send-email by default
Fix compilation on newer NetBSD systems
git config syntax updates
Another config file parsing fix.
checkout: use --aggressive when running a 3-way merge (-m).
After 567ffeb772 and
4bc87a28be, git-send-email no
longer requires any non-standard Perl modules, so there's no
reason to special-case it.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
NetBSD >=2.0 has iconv() in libc. A libiconv is not required and
does not exist.
See: http://netbsd.gw.com/cgi-bin/man-cgi?iconv+3+NetBSD-2.0
[jc: with a bit of simplification later discussed on the list.]
Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
After 567ffeb772 and
4bc87a28be, git-send-email no
longer requires any non-standard Perl modules, so there's no
reason to special-case it.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* np/delta:
improve diff-delta with sparse and/or repetitive data
tiny optimization to diff-delta
replace adler32 with Rabin's polynomial in diff-delta
use delta index data when finding best delta matches
split the diff-delta interface
This adds "binary patch" to the diff output and teaches apply
what to do with them.
On the diff generation side, traditionally, we said "Binary
files differ\n" without giving anything other than the preimage
and postimage object name on the index line. This was good
enough for applying a patch generated from your own repository
(very useful while rebasing), because the postimage would be
available in such a case. However, this was not useful when the
recipient of such a patch via e-mail were to apply it, even if
the preimage was available.
This patch allows the diff to generate "binary" patch when
operating under --full-index option. The binary patch follows
the usual extended git diff headers, and looks like this:
"GIT binary patch\n"
<length byte><data>"\n"
...
"\n"
Each line is prefixed with a "length-byte", whose value is upper
or lowercase alphabet that encodes number of bytes that the data
on the line decodes to (1..52 -- 'A' means 1, 'B' means 2, ...,
'Z' means 26, 'a' means 27, ...). <data> is 1 or more groups of
5-byte sequence, each of which encodes up to 4 bytes in base85
encoding. Because 52 / 4 * 5 = 65 and we have the length byte,
an output line is capped to 66 characters. The payload is the
same diff-delta as we use in the packfiles.
On the consumption side, git-apply now can decode and apply the
binary patch when --allow-binary-replacement is given, the diff
was generated with --full-index, and the receiving repository
has the preimage blob, which is the same condition as it always
required when accepting an "Binary files differ\n" patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When inspecting a project whose build infrastructure used to
assume that .git/HEAD is a symlink ref, core.prefersymlinkrefs
in the config file of such a project would help to bisect its
history.
Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from 9f0bb90d16 commit)
We used to depend on bignum from openssl for rev-list to compute
merge-order, but there is no reason to use different build
recipe from other programs anymore. Just build it with git-%$X
rule like everybody else.
Noticed by Alexey Dobriyan.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When inspecting a project whose build infrastructure used to
assume that .git/HEAD is a symlink ref, core.prefersymlinkrefs
in the config file of such a project would help to bisect its
history.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove the shell-script version, make the hardlink from the git
binary, and update the documentation to describe a new option.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This attempts to set up built-in "git grep" to further reduce
our dependence on the shell, while at the same time optionally
allowing to run grep against object database. You could do
funky things like these:
git grep --cached -e pattern ;# grep from index
git grep -e pattern master ;# or in a rev
git grep -e pattern master next ;# or in multiple revs
git grep -e pattern pu^@ ;# even like this with an
;# extension from another topic ;-)
git grep -e pattern master..next ;# or even from rev ranges
git grep -e pattern master~20:Documentation
;# or an arbitrary tree
git grep -e pattern next:git-commit.sh
;# or an arbitrary blob
Right now, it does not understand and/or obey many options grep
should accept, and the pattern must be given with -e option due
to the way the parameter parser is structured, both of which
obviously need to be fixed for usability.
But this is going in the right direction. The shell script
version is one of the worst Portability offender in the git
barebone Porcelainish; it uses xargs -0 to pass paths around and
shell arrays to sift flags and parameters.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a builtin "push" command, which is largely just a C'ification of
the "git-push.sh" script.
Now, the reason I did it as a built-in is partly because it's yet another
step on relying less on shell, but it's actually mostly because I've
wanted to be able to push to _multiple_ repositories, and the most obvious
and simplest interface for that would seem be to just have a "remotes"
file that has multiple URL entries.
(For "pull", having multiple entries should either just select the first
one, or you could fall back on the others on failure - your choice).
And quite frankly, it just became too damn messy to do that in shell.
Besides, we actually have a fair amount of infrastructure in C, so it just
wasn't that hard to do.
Of course, this is almost totally untested. It probably doesn't work for
anything but the one trial I threw at it. "Simple" doesn't necessarily
mean "obviously correct".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This brings another small repacking speedup for sensibly the same pack
size. On the Linux kernel repo, git-repack -a -f is 3.7% faster for a
0.4% larger pack.
Credits to Geert Bosch who brought the Rabin's polynomial idea to my
attention.
This also eliminate the issue of adler32() reading past the data buffer,
as noticed by Johannes Schindelin.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also it learned to do -v (verbose) to report:
- number of loose objects
- disk occupied by loose objects
- number of objects in local packs
- number of loose objects that are also in pack
- unrecognised garbage in .git/objects/??/.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master:
commit-tree: allow generic object name for the tree as well.
Makefile: remove and create xdiff library from scratch.
t0000-basic: Add ls-tree recursive test back.
Libified diff-index: backward compatibility fix.
Libify diff-index.
Libify diff-files.
Makefile: remove and create libgit.a from scratch.
Document the configuration file
Document git-var -l listing also configuration variables
rev-parse: better error message for ambiguous arguments
make update-index --chmod work with multiple files and --stdin
socksetup: don't return on set_reuse_addr() error
Fix "git show --stat"
git-update-index --unresolve
Add git-unresolve <paths>...
Add colordiff for git to contrib/colordiff.
gitk: Let git-rev-list do the argument list parsing
Foolishly I renamed diff.o around which caused an old diff.o
taken out of libgit.a and got linked into resulting binary and
exhibited mysterious breakage for many people. This borrows
from the kernel Makefile (scripts/Makefile.build) to first remove
the target and then recreate.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This was useful in diagnosing the corrupt index.aux format
problem. But do not bother building or installing it by
default.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The cache_tree data structure is to cache tree object names that
would result from the current index file.
The idea is to have an optional file to record each tree object
name that corresponds to a directory path in the cache when we
run write_cache(), and read it back when we run read_cache().
During various index manupulations, we selectively invalidate
the parts so that the next write-tree can bypass regenerating
tree objects for unchanged parts of the directory hierarchy.
We could perhaps make the cache-tree data an optional part of
the index file, but that would involve the index format updates,
so unless we need it for performance reasons, the current plan
is to use a separate file, $GIT_DIR/index.aux to store this
information and link it with the index file with the checksum
that is already used for index file integrity check.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is the first installment to libify diff brothers.
The updated diff-files uses revision.c::setup_revisions()
infrastructure to parse its command line arguments, which means
the pathname arguments are checked more strictly than before.
The tests are adjusted to separate possibly missing paths from
the rest of arguments with double-dashes, to show the kosher
way.
As Linus pointed out, renaming diff.c to diff-lib.c was simply
stupid, so I am renaming it back. The new diff-lib.c is to
contain pieces extracted from diff brothers.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Right now it split it into "builtin-log.c" for log-related commands
("log", "show" and "whatchanged"), and "builtin-help.c" for the
informational commands (usage printing and "help" and "version").
This just makes things easier to read, I find.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This target lists undocumented commands, and/or whose document
is not referenced from the main git documentation.
For now, there are some exceptions I added primarily because I
lack the energy to document them myself:
- merge backends (we should really document them)
- ssh-push/ssh-pull (does anybody still use them?)
- annotate and blame (maybe after one of them eats the other ;-)
Signed-off-by: Junio C Hamano <junkio@cox.net>
Nobody except diff-stages used it -- the callers instead filtered
the input to diffcore themselves. Make diff-stages do that as
well and retire diffcore-pathspec.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This separates out the part that deals with one-commit diff-tree
(and --stdin form) into a separate log-tree module.
There are two goals with this. The more important one is to be
able to make this part available to "git log --diff", so that we
can have a native "git whatchanged" command. Another is to
simplify the commit log generation part simpler.
Signed-off-by: Junio C Hamano <junkio@cox.net>
With an old curl version, git-http-push is not compiled. But git-http-fetch
still needs to be linked with expat if NO_EXPAT is not defined.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This command removes untracked files from the working tree. This
implementation is based on cg-clean with some simplifications. The
documentation is included.
[jc: with trivial documentation fix, noticed by Jakub Narebski]
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This refactors the line-by-line callback mechanism used in
combine-diff so that other programs can reuse it more easily.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If git is not built with NO_EXPAT, this patch changes git-http-fetch to
attempt using DAV to get a list of remote packs and fall back to using
objects/info/packs if the DAV request fails.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Useful for diagnostics/troubleshooting to know which client versions are
hitting your server.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The dependency was not properly updated when we added this
library, breaking parallel build with $(MAKE) -j.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Introduce tree-walk.[ch] and move "struct tree_desc" and
associated functions from various places.
Rename DIFF_FILE_CANON_MODE(mode) macro to canon_mode(mode) and
move it to cache.h. This macro returns the canonicalized
st_mode value in the host byte order for files, symlinks and
directories -- to be compared with a tree_desc entry.
create_ce_mode(mode) in cache.h is similar but is intended to be
used for index entries (so it does not work for directories) and
returns the value in the network byte order.
Signed-off-by: Junio C Hamano <junkio@cox.net>
For some reason, I need ALL_LDFLAGS in the git target only on
AIX. Once it builds, only one test "fails" on AIX 5.1 with
1.3.0.rc1, t5500-fetch-pack.sh, but it looks like it's some
odd tool problem in the tester + my setup and not a real bug.
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
