We should be able to fall back to loose objects or alternative packs when
a pack becomes corrupted. This is especially true when an object exists
in one pack only as a delta but its base object is corrupted. Currently
there is no way to retrieve the former object even if the later is
available in another pack or loose.
This patch allows for a delta to be resolved (with a performance cost)
using a base object from a source other than the pack where that delta
is located. Same thing for non-delta objects: rather than failing
outright, a search is made in other packs or used loose when the
currently active pack has it but corrupted.
Of course git will become extremely noisy with error messages when that
happens. However, if the operation succeeds nevertheless, a simple
'git repack -a -f -d' will "fix" the corrupted repository given that all
corrupted objects have a good duplicate somewhere in the object store,
possibly manually copied from another source.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The AIX mkstemp will modify it's template parameter to an empty string if
the call fails. This caused a subsequent mkdir to fail.
Signed-off-by: Patrick Higgins <patrick.higgins@cexp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this function we must be careful to handle drive-local paths else there
is a danger that it runs into an infinite loop.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
As explained in the documentation[*] this is totally useless on
filesystems that do ordered/journalled data writes, but it can be a
useful safety feature on filesystems like HFS+ that only journal the
metadata, not the actual file contents.
It defaults to off, although we could presumably in theory some day
auto-enable it on a per-filesystem basis.
[*] Yes, I updated the docs for the thing. Hell really _has_ frozen
over, and the four horsemen are probably just beyond the horizon.
EVERYBODY PANIC!
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was implemented as a thin wrapper around an otherwise unused
helper function parse_pack_index_file(). The code becomes simpler
and easier to read by consolidating the two.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a shared repository, we should make sure adjust_shared_perm() is called
after creating the initial fan-out directories under objects/ directory.
Earlier an logico called the function only when mkdir() failed; we should
do so when mkdir() succeeded.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before even calling this, all callers have done a "has_sha1_file(sha1)"
or "has_loose_object(sha1)" check, so there is no point in doing a
second check.
If something races with us on object creation, we handle that in the
final link() that moves it to the right place.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we've made the loose SHA1 file reading more careful and
streamlined, we only use the old find_sha1_file() function for checking
whether a loose object file exists at all.
As such, the whole 'return stat information' part of it was just
pointless (nobody cares any more), and the naming of the function is not
really all that relevant either.
So simplify it to not do a 'stat()', but just an existence check (which
is what the callers want), and rename it to 'has_loose_object()' which
matches the use.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to do 'stat()+open()+mmap()+close()' to read the loose object
file data, which does work fine, but has a couple of problems:
- it unnecessarily walks the filename twice (at 'stat()' time and then
again to open it)
- NFS generally has open-close consistency guarantees, which means that
the initial 'stat()' was technically done outside of the normal
consistency rules.
So change it to do 'open()+fstat()+mmap()+close()' instead, which avoids
both these issues.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of creating new temporary objects in the top-level git object
directory, create them in the same directory they will finally end up in
anyway. This avoids making the final atomic "rename to stable name"
operation be a cross-directory event, which makes it a lot easier for
various filesystems.
Several filesystems do things like change the inode number when moving
files across directories (or refuse to do it entirely).
In particular, it can also cause problems for NFS implementations that
change the filehandle of a file when it moves to a different directory,
like the old user-space NFS server did, and like the Linux knfsd still
does if you don't export your filesystems with 'no_subtree_check' or if
you export a filesystem that doesn't have stable inode numbers across
renames).
This change also obviously implies creating the object fan-out
subdirectory at tempfile creation time, rather than at the final
move_temp_to_file() time. Which actually accounts for most of the size
of the patch.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_sha1_from_fd() and write_sha1_to_fd() were dead code nobody called,
neither the latter's helper repack_object() was.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This consolidates the common operations for closing the new temporary file
that we have written, before we move it into place with the final name.
There's some common code there (make it read-only and check for errors on
close), but more importantly, this also gives a single place to add an
fsync_or_die() call if we want to add a safe mode.
This was triggered due to Denis Bueno apparently twice being able to
corrupt his git repository on OS X due to an unlucky combination of kernel
crashes and a not-very-robust filesystem.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier commit 633f43e (Remove redundant code, eliminate one static
variable, 2008-05-24) had a thinko (perhaps an eyeno) that broke
sha1_pack_index_name() function. One symptom of this was that the http
walker is now completely broken.
This should fix it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/clone-in-c:
Add test for cloning with "--reference" repo being a subset of source repo
Add a test for another combination of --reference
Test that --reference actually suppresses fetching referenced objects
clone: fall back to copying if hardlinking fails
builtin-clone.c: Need to closedir() in copy_or_link_directory()
builtin-clone: fix initial checkout
Build in clone
Provide API access to init_db()
Add a function to set a non-default work tree
Allow for having for_each_ref() list extra refs
Have a constant extern refspec for "--tags"
Add a library function to add an alternate to the alternates file
Add a lockfile function to append to a file
Mark the list of refs to fetch as const
Conflicts:
cache.h
t/t5700-clone-reference.sh
This is meant to force the creation of a loose object even if it
already exists packed. Needed for the next commit.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in the core so that, if the alternates file has already been
read, the addition can be parsed and put into effect for the current
process.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when looking for a packed object from the pack idx, a
simple binary search is used.
A conventional binary search loop looks like this:
unsigned lo, hi;
do {
unsigned mi = (lo + hi) / 2;
int cmp = "entry pointed at by mi" minus "target";
if (!cmp)
return mi; "mi is the wanted one"
if (cmp > 0)
hi = mi; "mi is larger than target"
else
lo = mi+1; "mi is smaller than target"
} while (lo < hi);
"did not find what we wanted"
The invariants are:
- When entering the loop, 'lo' points at a slot that is never
above the target (it could be at the target), 'hi' points at
a slot that is guaranteed to be above the target (it can
never be at the target).
- We find a point 'mi' between 'lo' and 'hi' ('mi' could be
the same as 'lo', but never can be as high as 'hi'), and
check if 'mi' hits the target. There are three cases:
- if it is a hit, we have found what we are looking for;
- if it is strictly higher than the target, we set it to
'hi', and repeat the search.
- if it is strictly lower than the target, we update 'lo'
to one slot after it, because we allow 'lo' to be at the
target and 'mi' is known to be below the target.
If the loop exits, there is no matching entry.
When choosing 'mi', we do not have to take the "middle" but
anywhere in between 'lo' and 'hi', as long as lo <= mi < hi is
satisfied. When we somehow know that the distance between the
target and 'lo' is much shorter than the target and 'hi', we
could pick 'mi' that is much closer to 'lo' than (hi+lo)/2,
which a conventional binary search would pick.
This patch takes advantage of the fact that the SHA-1 is a good
hash function, and as long as there are enough entries in the
table, we can expect uniform distribution. An entry that begins
with for example "deadbeef..." is much likely to appear much
later than in the midway of a reasonably populated table. In
fact, it can be expected to be near 87% (222/256) from the top
of the table.
This is a work-in-progress and has switches to allow easier
experiments and debugging. Exporting GIT_USE_LOOKUP environment
variable enables this code.
On my admittedly memory starved machine, with a partial KDE
repository (3.0G pack with 95M idx):
$ GIT_USE_LOOKUP=t git log -800 --stat HEAD >/dev/null
3.93user 0.16system 0:04.09elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+55588minor)pagefaults 0swaps
Without the patch, the numbers are:
$ git log -800 --stat HEAD >/dev/null
4.00user 0.15system 0:04.17elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+60258minor)pagefaults 0swaps
In the same repository:
$ GIT_USE_LOOKUP=t git log -2000 HEAD >/dev/null
0.12user 0.00system 0:00.12elapsed 97%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+4241minor)pagefaults 0swaps
Without the patch, the numbers are:
$ git log -2000 HEAD >/dev/null
0.05user 0.01system 0:00.07elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+8506minor)pagefaults 0swaps
There isn't much time difference, but the number of minor faults
seems to show that we are touching much smaller number of pages,
which is expected.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit eb32d236df, there was a TODO
comment in packed_object_info_detail() about the SHA1 of base object to
OBJ_OFS_DELTA objects. So here it is at last.
While at it, providing the actual storage size information as well is now
trivial.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mk/maint-parse-careful:
peel_onion: handle NULL
check return value from parse_commit() in various functions
parse_commit: don't fail, if object is NULL
revision.c: handle tag->tagged == NULL
reachable.c::process_tree/blob: check for NULL
process_tag: handle tag->tagged == NULL
check results of parse_commit in merge_bases
list-objects.c::process_tree/blob: check for NULL
reachable.c::add_one_tree: handle NULL from lookup_tree
mark_blob/tree_uninteresting: check for NULL
get_sha1_oneline: check return value of parse_object
read_object_with_reference: don't read beyond the buffer
Now any commands may reference the empty tree object by its
sha1 (4b825dc642). This is
useful for showing some diffs, especially for initial
commits.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CRLF conversion bears a slight chance of corrupting data.
autocrlf=true will convert CRLF to LF during commit and LF to
CRLF during checkout. A file that contains a mixture of LF and
CRLF before the commit cannot be recreated by git. For text
files this is the right thing to do: it corrects line endings
such that we have only LF line endings in the repository.
But for binary files that are accidentally classified as text the
conversion can corrupt data.
If you recognize such corruption early you can easily fix it by
setting the conversion type explicitly in .gitattributes. Right
after committing you still have the original file in your work
tree and this file is not yet corrupted. You can explicitly tell
git that this file is binary and git will handle the file
appropriately.
Unfortunately, the desired effect of cleaning up text files with
mixed line endings and the undesired effect of corrupting binary
files cannot be distinguished. In both cases CRLFs are removed
in an irreversible way. For text files this is the right thing
to do because CRLFs are line endings, while for binary files
converting CRLFs corrupts data.
This patch adds a mechanism that can either warn the user about
an irreversible conversion or can even refuse to convert. The
mechanism is controlled by the variable core.safecrlf, with the
following values:
- false: disable safecrlf mechanism
- warn: warn about irreversible conversions
- true: refuse irreversible conversions
The default is to warn. Users are only affected by this default
if core.autocrlf is set. But the current default of git is to
leave core.autocrlf unset, so users will not see warnings unless
they deliberately chose to activate the autocrlf mechanism.
The safecrlf mechanism's details depend on the git command. The
general principles when safecrlf is active (not false) are:
- we warn/error out if files in the work tree can modified in an
irreversible way without giving the user a chance to backup the
original file.
- for read-only operations that do not modify files in the work tree
we do not not print annoying warnings.
There are exceptions. Even though...
- "git add" itself does not touch the files in the work tree, the
next checkout would, so the safety triggers;
- "git apply" to update a text file with a patch does touch the files
in the work tree, but the operation is about text files and CRLF
conversion is about fixing the line ending inconsistencies, so the
safety does not trigger;
- "git diff" itself does not touch the files in the work tree, it is
often run to inspect the changes you intend to next "git add". To
catch potential problems early, safety triggers.
The concept of a safety check was originally proposed in a similar
way by Linus Torvalds. Thanks to Dimitry Potapov for insisting
on getting the naked LF/autocrlf=true case right.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
fast-import was relying on the fact that on most systems mmap() and
write() are synchronized by the filesystem's buffer cache. We were
relying on the ability to mmap() 20 bytes beyond the current end
of the file, then later fill in those bytes with a future write()
call, then read them through the previously obtained mmap() address.
This isn't always true with some implementations of NFS, but it is
especially not true with our NO_MMAP=YesPlease build time option used
on some platforms. If fast-import was built with NO_MMAP=YesPlease
we used the malloc()+pread() emulation and the subsequent write()
call does not update the trailing 20 bytes of a previously obtained
"mmap()" (aka malloc'd) address.
Under NO_MMAP that behavior causes unpack_entry() in sha1_file.c to
be unable to read an object header (or data) that has been unlucky
enough to be written to the packfile at a location such that it
is in the trailing 20 bytes of a window previously opened on that
same packfile.
This bug has gone unnoticed for a very long time as it is highly data
dependent. Not only does the object have to be placed at the right
position, but it also needs to be positioned behind some other object
that has been accessed due to a branch cache invalidation. In other
words the stars had to align just right, and if you did run into
this bug you probably should also have purchased a lottery ticket.
Fortunately the workaround is a lot easier than the bug explanation.
Before we allow unpack_entry() to read data from a pack window
that has also (possibly) been modified through write() we force
all existing windows on that packfile to be closed. By closing
the windows we ensure that any new access via the emulated mmap()
will reread the packfile, updating to the current file content.
This comes at a slight performance degredation as we cannot reuse
previously cached windows when we update the packfile. But it
is a fairly minor difference as the window closes happen at only
two points:
- When the packfile is finalized and its .idx is generated:
At this stage we are getting ready to update the refs and any
data access into the packfile is going to be random, and is
going after only the branch tips (to ensure they are valid).
Our existing windows (if any) are not likely to be positioned
at useful locations to access those final tip commits so we
probably were closing them before anyway.
- When the branch cache missed and we need to reload:
At this point fast-import is getting change commands for the next
commit and it needs to go re-read a tree object it previously
had written out to the packfile. What windows we had (if any)
are not likely to cover the tree in question so we probably were
closing them before anyway.
We do try to avoid unnecessarily closing windows in the second case
by checking to see if the packfile size has increased since the
last time we called unpack_entry() on that packfile. If the size
has not changed then we have not written additional data, and any
existing window is still vaild. This nicely handles the cases where
fast-import is going through a branch cache reload and needs to read
many trees at once. During such an event we are not likely to be
updating the packfile so we do not cycle the windows between reads.
With this change in place t9301-fast-export.sh (which was broken
by c3b0dec509) finally works again.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old way of fixing warnings did not succeed on MinGW. MinGW
does not support C99 printf format strings for size_t [1]. But
gcc on MinGW issues warnings if C99 printf format is not used.
Hence, the old stragegy to avoid warnings fails.
[1] http://www.mingw.org/MinGWiki/index.php/C99
This commits passes arguments of type size_t through a tiny
helper functions that casts to the type expected by the format
string.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are some places that test for an absolute path. Use the helper
function to ease porting.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
RelNotes-1.5.3.5: describe recent fixes
merge-recursive.c: mrtree in merge() is not used before set
sha1_file.c: avoid gcc signed overflow warnings
Fix a small memory leak in builtin-add
honor the http.sslVerify option in shell scripts
With the recent gcc, we get:
sha1_file.c: In check_packed_git_:
sha1_file.c:527: warning: assuming signed overflow does not
occur when assuming that (X + c) < X is always false
sha1_file.c:527: warning: assuming signed overflow does not
occur when assuming that (X + c) < X is always false
for a piece of code that tries to make sure that off_t is large
enough to hold more than 2^32 offset. The test tried to make
sure these do not wrap-around:
/* make sure we can deal with large pack offsets */
off_t x = 0x7fffffffUL, y = 0xffffffffUL;
if (x > (x + 1) || y > (y + 1)) {
but gcc assumes it can do whatever optimization it wants for a
signed overflow (undefined behaviour) and warns about this
construct.
Follow Linus's suggestion to check sizeof(off_t) instead to work
around the problem.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ph/strbuf: (44 commits)
Make read_patch_file work on a strbuf.
strbuf_read_file enhancement, and use it.
strbuf change: be sure ->buf is never ever NULL.
double free in builtin-update-index.c
Clean up stripspace a bit, use strbuf even more.
Add strbuf_read_file().
rerere: Fix use of an empty strbuf.buf
Small cache_tree_write refactor.
Make builtin-rerere use of strbuf nicer and more efficient.
Add strbuf_cmp.
strbuf_setlen(): do not barf on setting length of an empty buffer to 0
sq_quote_argv and add_to_string rework with strbuf's.
Full rework of quote_c_style and write_name_quoted.
Rework unquote_c_style to work on a strbuf.
strbuf API additions and enhancements.
nfv?asprintf are broken without va_copy, workaround them.
Fix the expansion pattern of the pseudo-static path buffer.
builtin-for-each-ref.c::copy_name() - do not overstep the buffer.
builtin-apply.c: fix a tiny leak introduced during xmemdupz() conversion.
Use xmemdupz() in many places.
...
For that purpose, the ->buf is always initialized with a char * buf living
in the strbuf module. It is made a char * so that we can sloppily accept
things that perform: sb->buf[0] = '\0', and because you can't pass "" as an
initializer for ->buf without making gcc unhappy for very good reasons.
strbuf_init/_detach/_grow have been fixed to trust ->alloc and not ->buf
anymore.
as a consequence strbuf_detach is _mandatory_ to detach a buffer, copying
->buf isn't an option anymore, if ->buf is going to escape from the scope,
and eventually be free'd.
API changes:
* strbuf_setlen now always works, so just make strbuf_reset a convenience
macro.
* strbuf_detatch takes a size_t* optional argument (meaning it can be
NULL) to copy the buffer's len, as it was needed for this refactor to
make the code more readable, and working like the callers.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Now, those functions take an "out" strbuf argument, where they store their
result if any. In that case, it also returns 1, else it returns 0.
* those functions support "in place" editing, in the sense that it's OK to
call them this way:
convert_to_git(path, sb->buf, sb->len, sb);
When doable, conversions are done in place for real, else the strbuf
content is just replaced with the new one, transparentely for the caller.
If you want to create a new filter working this way, being the accumulation
of filter1, filter2, ... filtern, then your meta_filter would be:
int meta_filter(..., const char *src, size_t len, struct strbuf *sb)
{
int ret = 0;
ret |= filter1(...., src, len, sb);
if (ret) {
src = sb->buf;
len = sb->len;
}
ret |= filter2(...., src, len, sb);
if (ret) {
src = sb->buf;
len = sb->len;
}
....
return ret | filtern(..., src, len, sb);
}
That's why subfilters the convert_to_* functions called were also rewritten
to work this way.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This brings builtin-stripspace, builtin-tag and mktag to use strbufs.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Under some types of packfile corruption the zlib stream holding the
data for a delta within a packfile may fail to inflate, due to say
a CRC failure within the compressed data itself. When this occurs
the unpack_compressed_entry function will return NULL as a signal to
the caller that the data is not available. Unfortunately we then
tried to use that NULL as though it referenced a memory location
where a delta was stored and tried to apply it to the delta base.
Loading a byte from the NULL address typically causes a SIGSEGV.
cate on #git noticed this failure in `git fsck --full` where the
call to verify_pack() first noticed that the packfile was corrupt
by finding that the packfile's SHA-1 did not match the raw data of
the file. After finding this fsck went ahead and tried to verify
every object within the packfile, even though the packfile was
already known to be bad. If we are going to shovel bad data at
the delta unpacking code, we better handle it correctly.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Print the index version when an error occurs so the user
knows what type of header (and size) we thought the index
should have had.
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new name is closer to the purpose of the function.
A NUL-terminated buffer makes things easier when callers need that.
Since the function returns only the memory written with data,
almost always allocating more space than needed because final
size is unknown, an extra NUL terminating the buffer is harmless.
It is not included in the returned size, so the function
remains working as before.
Also, now the function allows the buffer passed to be NULL at first,
and alloc_nr is now used for growing the buffer, instead size=*2.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Document -<n> for git-format-patch
glossary: add 'reflog'
diff --no-index: fix --name-status with added files
Don't smash stack when $GIT_ALTERNATE_OBJECT_DIRECTORIES is too long
There is no restriction on the length of the name returned by
get_object_directory, other than the fact that it must be a stat'able
git object directory. That means its name may have length up to
PATH_MAX-1 (i.e., often 4095) not counting the trailing NUL.
Combine that with the assumption that the concatenation of that name and
suffixes like "/info/alternates" and "/pack/---long-name---.idx" will fit
in a buffer of length PATH_MAX, and you see the problem. Here's a fix:
sha1_file.c (prepare_packed_git_one): Lengthen "path" buffer
so we are guaranteed to be able to append "/pack/" without checking.
Skip any directory entry that is too long to be appended.
(read_info_alternates): Protect against a similar buffer overrun.
Before this change, using the following admittedly contrived environment
setting would cause many git commands to clobber their stack and segfault
on a system with PATH_MAX == 4096:
t=$(perl -e '$s=".git/objects";$n=(4096-6-length($s))/2;print "./"x$n . $s')
export GIT_ALTERNATE_OBJECT_DIRECTORIES=$t
touch g
./git-update-index --add g
If you run the above commands, you'll soon notice that many
git commands now segfault, so you'll want to do this:
unset GIT_ALTERNATE_OBJECT_DIRECTORIES
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A pack-file can get created without any objects in it (to transfer "no
data" - which can happen if you use a reference git repo, for example,
or just otherwise just end up transferring only branch head information
and already have all the objects themselves).
And while we probably should never create an index for such a pack, if we
do (and we do), the index file size sanity checking was incorrect.
This fixes it.
Reported-and-tested-by: Jocke Tjernlund <tjernlund@tjernlund.se>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/pack:
Style nit - don't put space after function names
Ensure the pack index is opened before access
Simplify index access condition in count-objects, pack-redundant
Test for recent rev-parse $abbrev_sha1 regression
rev-parse: Identify short sha1 sums correctly.
Attempt to delay prepare_alt_odb during get_sha1
Micro-optimize prepare_alt_odb
Lazily open pack index files on demand
* maint:
git-config: Improve documentation of git-config file handling
git-config: Various small fixes to asciidoc documentation
decode_85(): fix missing return.
fix signed range problems with hex conversions
* maint-1.5.1:
git-config: Improve documentation of git-config file handling
git-config: Various small fixes to asciidoc documentation
decode_85(): fix missing return.
fix signed range problems with hex conversions
Jon Smirl said:
| Once an object reference hits a pack file it is very likely that
| following references will hit the same pack file. So first place to
| look for an object is the same place the previous object was found.
This is indeed a good heuristic so here it is. The search always start
with the pack where the last object lookup succeeded. If the wanted
object is not available there then the search continues with the normal
pack ordering.
To test this I split the Linux repository into 66 packs and performed a
"time git-rev-list --objects --all > /dev/null". Best results are as
follows:
Pack Sort w/o this patch w/ this patch
-------------------------------------------------------------
recent objects last 26.4s 20.9s
recent objects first 24.9s 18.4s
This shows that the pack order based on object age has some influence,
but that the last-used-pack heuristic is even more significant in
reducing object lookup.
Signed-off-by: Nicolas Pitre <nico@cam.org> --- Note: the
--max-pack-size to git-repack currently produces packs with old objects
after those containing recent objects. The pack sort based on
filesystem timestamp is therefore backward for those. This needs to be
fixed of course, but at least it made me think about this variable for
the test.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make hexval_table[] "const". Also make sure that the accessor
function hexval() does not access the table with out-of-range
values by declaring its parameter "unsigned char", instead of
"unsigned int".
With this, gcc can just generate:
movzbl (%rdi), %eax
movsbl hexval_table(%rax),%edx
movzbl 1(%rdi), %eax
movsbl hexval_table(%rax),%eax
sall $4, %edx
orl %eax, %edx
for the code to generate a byte from two hex characters.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Our style is to not put a space after a function name. I did here,
and Junio applied the patch with the incorrect formatting. So I'm
cleaning up after myself since I noticed it upon review.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Calling getenv() is not that expensive, but its also not free,
and its certainly not cheaper than testing to see if alt_odb_tail
is not null.
Because we are calling prepare_alt_odb() from within find_sha1_file
every time we cannot find an object file locally we want to skip out
of prepare_alt_odb() as early as possible once we have initialized
our alternate list.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In some repository configurations the user may have many packfiles,
but all of the recent commits/trees/tags/blobs are likely to
be in the most recent packfile (the one with the newest mtime).
It is therefore common to be able to complete an entire operation
by accessing only one packfile, even if there are 25 packfiles
available to the repository.
Rather than opening and mmaping the corresponding .idx file for
every pack found, we now only open and map the .idx when we suspect
there might be an object of interest in there.
Of course we cannot known in advance which packfile contains an
object, so we still need to scan the entire packed_git list to
locate anything. But odds are users want to access objects in the
most recently created packfiles first, and that may be all they
ever need for the current operation.
Junio observed in b867092f that placing recent packfiles before
older ones can slightly improve access times for recent objects,
without degrading it for historical object access.
This change improves upon Junio's observations by trying even harder
to avoid the .idx files that we won't need.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* np/pack:
deprecate the new loose object header format
make "repack -f" imply "pack-objects --no-reuse-object"
allow for undeltified objects not to be reused
This patch fixes all calls to xread() where the return value is not
stored into an ssize_t. The patch should not have any effect whatsoever,
other than putting better/more appropriate type names on variables.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that we encourage and actively preserve objects in a packed form
more agressively than we did at the time the new loose object format and
core.legacyheaders were introduced, that extra loose object format
doesn't appear to be worth it anymore.
Because the packing of loose objects has to go through the delta match
loop anyway, and since most of them should end up being deltified in
most cases, there is really little advantage to have this parallel loose
object format as the CPU savings it might provide is rather lost in the
noise in the end.
This patch gets rid of core.legacyheaders, preserve the legacy format as
the only writable loose object format and deprecate the other one to
keep things simpler.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Start preparing for 1.5.1.3
Sanitize @to recipients.
git-svn: Ignore usernames in URLs in find_by_url
Document --dry-run and envelope-sender for git-send-email.
Allow users to optionally specify their envelope sender.
Ensure clean addresses are always used with Net::SMTP
Validate @recipients before using it for sendmail and Net::SMTP.
Perform correct quoting of recipient names.
Change the scope of the $cc variable as it is not needed outside of send_message.
Debugging cleanup improvements
Prefix Dry- to the message status to denote dry-runs.
Document --dry-run parameter to send-email.
git-svn: Don't rely on $_ after making a function call
Fix handle leak in write_tree
Actually handle some-low memory conditions
Conflicts:
RelNotes
git-send-email.perl
Tim Ansell discovered his Debian server didn't permit git-daemon to
use as much memory as it needed to handle cloning a project with
a 128 MiB packfile. Filtering the strace provided by Tim of the
rev-list child showed this gem of a sequence:
open("./objects/pack/pack-*.pack", O_RDONLY|O_LARGEFILE <unfinished ...>
<... open resumed> ) = 5
OK, so the packfile is fd 5...
mmap2(NULL, 33554432, PROT_READ, MAP_PRIVATE, 5, 0 <unfinished ...>
<... mmap2 resumed> ) = 0xb5e2d000
and we mapped one 32 MiB window from it at position 0...
mmap2(NULL, 31020635, PROT_READ, MAP_PRIVATE, 5, 0x6000 <unfinished ...>
<... mmap2 resumed> ) = -1 ENOMEM (Cannot allocate memory)
And we asked for another window further into the file. But got
denied. In Tim's case this was due to a resource limit on the
git-daemon process, and its children.
Now where are we in the code? We're down inside use_pack(),
after we have called unuse_one_window() enough times to make sure
we stay within our allowed maximum window size. However since we
didn't unmap the prior window at 0xb5e2d000 we aren't exceeding
the current limit (which probably was just the defaults).
But we're actually down inside xmmap()...
So we release the window we do have (by calling release_pack_memory),
assuming there is some memory pressure...
munmap(0xb5e2d000, 33554432 <unfinished ...>
<... munmap resumed> ) = 0
close(5 <unfinished ...>
<... close resumed> ) = 0
And that was the last window in this packfile. So we closed it.
Way to go us. Our xmmap did not expect release_pack_memory to
close the fd its about to map...
mmap2(NULL, 31020635, PROT_READ, MAP_PRIVATE, 5, 0x6000 <unfinished ...>
<... mmap2 resumed> ) = -1 EBADF (Bad file descriptor)
And so the Linux kernel happily tells us f' off.
write(2, "fatal: ", 7 <unfinished ...>
<... write resumed> ) = 7
write(2, "Out of memory? mmap failed: Bad "..., 47 <unfinished ...>
<... write resumed> ) = 47
And we report the bad file descriptor error, and not the ENOMEM,
and die, claiming we are out of memory. But actually that mmap
should have succeeded, as we had enough memory for that window,
seeing as how we released the prior one.
Originally when I developed the sliding window mmap feature I had
this exact same bug in fast-import, and I dealt with it by handing
in the struct packed_git* we want to open the new window for, as the
caller wasn't prepared to reopen the packfile if unuse_one_window
closed it. The same is true here from xmmap, but the caller doesn't
have the struct packed_git* handy. So I'm using the file descriptor
instead to perform the same test.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'jc/attr': (28 commits)
lockfile: record the primary process.
convert.c: restructure the attribute checking part.
Fix bogus linked-list management for user defined merge drivers.
Simplify calling of CR/LF conversion routines
Document gitattributes(5)
Update 'crlf' attribute semantics.
Documentation: support manual section (5) - file formats.
Simplify code to find recursive merge driver.
Counto-fix in merge-recursive
Fix funny types used in attribute value representation
Allow low-level driver to specify different behaviour during internal merge.
Custom low-level merge driver: change the configuration scheme.
Allow the default low-level merge driver to be configured.
Custom low-level merge driver support.
Add a demonstration/test of customized merge.
Allow specifying specialized merge-backend per path.
merge-recursive: separate out xdl_merge() interface.
Allow more than true/false to attributes.
Document git-check-attr
Change attribute negation marker from '!' to '-'.
...
* lt/gitlink:
Tests for core subproject support
Expose subprojects as special files to "git diff" machinery
Fix some "git ls-files -o" fallout from gitlinks
Teach "git-read-tree -u" to check out submodules as a directory
Teach git list-objects logic to not follow gitlinks
Fix gitlink index entry filesystem matching
Teach "git-read-tree -u" to check out submodules as a directory
Teach git list-objects logic not to follow gitlinks
Don't show gitlink directories when we want "other" files
Teach git-update-index about gitlinks
Teach directory traversal about subprojects
Fix thinko in subproject entry sorting
Teach core object handling functions about gitlinks
Teach "fsck" not to follow subproject links
Add "S_IFDIRLNK" file mode infrastructure for git links
Add 'resolve_gitlink_ref()' helper function
Avoid overflowing name buffer in deep directory structures
diff-lib: use ce_mode_from_stat() rather than messing with modes manually
... which consists of existing code split out of packed_delta_info()
for other callers to use it as well.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This teaches the really fundamental core SHA1 object handling routines
about gitlinks. We can compare trees with gitlinks in them (although we
can not actually generate patches for them yet - just raw git diffs),
and they show up as commits in "git ls-tree".
We also know to compare gitlinks as if they were directories (ie the
normal "sort as trees" rules apply).
[jc: amended a cut&paste error]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this patch, packs larger than 4GB are usable, even on a 32-bit machine
(at least on Linux). If off_t is not large enough to deal with a large
pack then die() is called instead of attempting to use the pack and
producing garbage.
This was tested with a 8GB pack specially created for the occasion on
a 32-bit machine.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch introduces the MSB() macro to obtain the desired number of
most significant bits from a given variable independently of the variable
type.
It is then used to better implement the overflow test on the OBJ_OFS_DELTA
base offset variable with the property of always working correctly
regardless of the type/size of that variable.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The coming index format change doesn't allow for the number of objects
to be determined from the size of the index file directly. Instead, Let's
initialize a field in the packed_git structure with the object count when
the index is validated since the count is always known at that point.
While at it let's reorder some struct packed_git fields to avoid padding
due to needed 64-bit alignment for some of them.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Let's avoid the open coded pack index reference in pack-object and use
nth_packed_object_sha1() instead. This will help encapsulating index
format differences in one place.
And while at it there is no reason to copy SHA1's over and over while a
direct pointer to it in the index will do just fine.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I stumbled across this in the context of the fchmod 0444 patch.
At first, I was going to unlink and call error like the two subsequent
tests do, but a failed write (above) provokes a "die", so I made
this do the same. This is testing for a write failure, after all.
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When some operations are interrupted (or "die()'d" or crashed) then the
partial object/pack/index file may remain around. Make it more obvious
in their name that those files are temporary stuff and can be cleaned up
if no operation is in progress.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When creating a new object, we use "deflate(stream, Z_FINISH)" in a loop
until it no longer returns Z_OK, and then we do "deflateEnd()" to finish
up business.
That should all work, but the fact is, it's not how you're _supposed_ to
use the zlib return values properly:
- deflate() should never return Z_OK in the first place, except if we
need to increase the output buffer size (which we're not doing, and
should never need to do, since we pre-allocated a buffer that is
supposed to be able to hold the output in full). So the "while()" loop
was incorrect: Z_OK doesn't actually mean "ok, continue", it means "ok,
allocate more memory for me and continue"!
- if we got an error return, we would consider it to be end-of-stream,
but it could be some internal zlib error. In short, we should check
for Z_STREAM_END explicitly, since that's the only valid return value
anyway for the Z_FINISH case.
- we never checked deflateEnd() return codes at all.
Now, admittedly, none of these issues should ever happen, unless there is
some internal bug in zlib. So this patch should make zero difference, but
it seems to be the right thing to do.
We should probablybe anal and check the return value of "deflateInit()"
too!
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use hash_sha1_file() instead of duplicating code to compute object SHA1.
While at it make it accept a const pointer.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The thing is, if the output buffer is empty, we should *still* actually
use the zlib routines to *unpack* that empty output buffer.
But we had a test that said "only unpack if we still expect more output".
So we wouldn't use up all the zlib stream, because we felt that we didn't
need it, because we already had all the bytes we wanted. And it was
"true": we did have all the output data. We just needed to also eat all
the input data!
We've had this bug before - thinking that we don't need to inflate()
anything because we already had it all..
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This provides a smoother degradation in performance when the cache
gets trashed due to the delta_base_cache_limit being reached. Limited
testing with really small delta_base_cache_limit values appears to confirm
this.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently there are 3 different ways to deal with the cache size.
Let's stick to only one. The compiler is smart enough to produce the exact
same code in those cases anyway.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The new configuration variable core.deltaBaseCacheLimit allows the
user to control how much memory they are willing to give to Git for
caching base objects of deltas. This is not normally meant to be
a user tweakable knob; the "out of the box" settings are meant to
be suitable for almost all workloads.
We default to 16 MiB under the assumption that the cache is not
meant to consume all of the user's available memory, and that the
cache's main purpose was to cache trees, for faster path limiters
during revision traversal. Since trees tend to be relatively small
objects, this relatively small limit should still allow a large
number of objects.
On the other hand we don't want the cache to start storing 200
different versions of a 200 MiB blob, as this could easily blow
the entire address space of a 32 bit process.
We evict OBJ_BLOB from the cache first (credit goes to Junio) as
we want to favor OBJ_TREE within the cache. These are the objects
that have the highest inflate() startup penalty, as they tend to
be small and thus don't have that much of a chance to ammortize
that penalty over the entire data.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A malloc() + memcpy() will always be faster than mmap() +
malloc() + inflate(). If the data is already there it is
certainly better to copy it straight away.
With this patch below I can do 'git log drivers/scsi/ >
/dev/null' about 7% faster. I bet it might be even more on
those platforms with bad mmap() support.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This trivial 256-entry delta_base cache improves performance for some
loads by a factor of 2.5 or so.
Instead of always re-generating the delta bases (possibly over and over
and over again), just cache the last few ones. They often can get re-used.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This doesn't change any code, it just creates a point for where we'd
actually do the caching of delta bases that have been generated.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Especially with the new index format to come, it is more appropriate
to encapsulate more into check_packed_git_idx() and assume less of the
index format in struct packed_git.
To that effect, the index_base is renamed to index_data with void * type
so it is not used directly but other pointers initialized with it. This
allows for a couple pointer cast removal, as well as providing a better
generic name to grep for when adding support for new index versions or
formats.
And index_data is declared const too while at it.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When accessing objects, we first look for them in packs that
are linked together in the reverse order of discovery.
Since younger packs tend to contain more recent objects, which
are more likely to be accessed often, and local packs tend to
contain objects more relevant to our specific projects, sort the
list of packs before starting to access them. In addition,
favoring local packs over the ones borrowed from alternates can
be a win when alternates are mounted on network file systems.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some systems have sizeof(off_t) == 8 while sizeof(size_t) == 4.
This implies that we are able to access and work on files whose
maximum length is around 2^63-1 bytes, but we can only malloc or
mmap somewhat less than 2^32-1 bytes of memory.
On such a system an implicit conversion of off_t to size_t can cause
the size_t to wrap, resulting in unexpected and exciting behavior.
Right now we are working around all gcc warnings generated by the
-Wshorten-64-to-32 option by passing the off_t through xsize_t().
In the future we should make xsize_t on such problematic platforms
detect the wrapping and die if such a file is accessed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not all platforms have declared 'unsigned long' to be a 64 bit value,
but we want to support a 64 bit packfile (or close enough anyway)
in the near future as some projects are getting large enough that
their packed size exceeds 4 GiB.
By using off_t, the POSIX type that is declared to mean an offset
within a file, we support whatever maximum file size the underlying
operating system will handle. For most modern systems this is up
around 2^60 or higher.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As we permit up to 2^32-1 objects in a single packfile we cannot
use a signed int to represent the object offset within a packfile,
after 2^31-1 objects we will start seeing negative indexes and
error out or compute bad addresses within the mmap'd index.
This is a minor cleanup that does not introduce any significant
logic changes. It is roach free.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We shouldn't attempt to assign constant strings into char*, as the
string is not writable at runtime. Likewise we should always be
treating unsigned values as unsigned values, not as signed values.
Most of these are very straightforward. The only exception is the
(unnecessary) xstrdup/free in builtin-branch.c for the detached
head case. Since this is a user-level interactive type program
and that particular code path is executed no more than once, I feel
that the extra xstrdup call is well worth the easy elimination of
this warning.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If an index is corrupt, or is simply too new for us to understand,
we were leaking the mmap that held the entire content of the index.
This could be a considerable size on large projects, given that
the index is at least 24 bytes * nr_objects.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Because we are currently cheating and never supplying the delta base
for an OBJ_OFS_DELTA we get a random SHA-1 in the delta base field.
Instead lets clear the hash out so its at least all 0's. This is
somewhat more obvious that something fishy is going on, like we
don't actually have the SHA-1 of the base handy. :)
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We did not detect broken loose object files, either when
underlying inflate() signalled the breakage, nor inflate()
finished and we had garbage trailing at the end. We do better
now.
We also make unpack_sha1_file() a static function to
sha1_file.c, since it is not used by anybody outside.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We currently have two parallel notation for dealing with object types
in the code: a string and a numerical value. One of them is obviously
redundent, and the most used one requires more stack space and a bunch
of strcmp() all over the place.
This is an initial step for the removal of the version using a char array
found in object reading code paths. The patch is unfortunately large but
there is no sane way to split it in smaller parts without breaking the
system.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Sometime typename() is used, sometimes type_names[] is accessed directly.
Let's enforce typename() all the time which allows for validating the
type.
Also let's add a function to go from a name to a type and use it instead
of manual memcpy() when appropriate.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
First there are too many offsets there and it is getting confusing.
So 'offset' is now 'curpos' to distinguish from other offsets like
'obj_offset'.
Then structures like x = foo(x, &y) are now done as y = foo(&x).
It looks more natural that the result y be returned directly and
x be passed as reference to be updated in place. This has the effect
of reducing some line length and removing a few, needing a bit less
stack space, and it even reduces the compiled code size.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Let's have hdr be a simple char pointer/array when possible, and let's
reduce its storage to 32 bytes. Especially for sha1_loose_object_info()
where 128 bytes is way excessive and wastes extra CPU cycles inflating.
The object type is already restricted to 10 bytes in parse_sha1_header()
and the size, even if it is 64 bits, will fit in 20 decimal numbers. So
32 bytes is plenty.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lt/crlf:
Teach core.autocrlf to 'git apply'
t0020: add test for auto-crlf
Make AutoCRLF ternary variable.
Lazy man's auto-CRLF
* jc/apply-config:
t4119: test autocomputing -p<n> for traditional diff input.
git-apply: guess correct -p<n> value for non-git patches.
git-apply: notice "diff --git" patch again
Fix botched "leak fix"
t4119: add test for traditional patch and different p_value
apply: fix memory leak in prefix_one()
git-apply: require -p<n> when working in a subdirectory.
git-apply: do not lose cwd when run from a subdirectory.
Teach 'git apply' to look at $HOME/.gitconfig even outside of a repository
Teach 'git apply' to look at $GIT_DIR/config
This ensures that a given area is mapped at most twice, and greatly
reduces the virtual address space usage.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It currently does NOT know about file attributes, so it does its
conversion purely based on content. Maybe that is more in the "git
philosophy" anyway, since content is king, but I think we should try to do
the file attributes to turn it off on demand.
Anyway, BY DEFAULT it is off regardless, because it requires a
[core]
AutoCRLF = true
in your config file to be enabled. We could make that the default for
Windows, of course, the same way we do some other things (filemode etc).
But you can actually enable it on UNIX, and it will cause:
- "git update-index" will write blobs without CRLF
- "git diff" will diff working tree files without CRLF
- "git checkout" will write files to the working tree _with_ CRLF
and things work fine.
Funnily, it actually shows an odd file in git itself:
git clone -n git test-crlf
cd test-crlf
git config core.autocrlf true
git checkout
git diff
shows a diff for "Documentation/docbook-xsl.css". Why? Because we have
actually checked in that file *with* CRLF! So when "core.autocrlf" is
true, we'll always generate a *different* hash for it in the index,
because the index hash will be for the content _without_ CRLF.
Is this complete? I dunno. It seems to work for me. It doesn't use the
filename at all right now, and that's probably a deficiency (we could
certainly make the "is_binary()" heuristics also take standard filename
heuristics into account).
I don't pass in the filename at all for the "index_fd()" case
(git-update-index), so that would need to be passed around, but this
actually works fine.
NOTE NOTE NOTE! The "is_binary()" heuristics are totally made-up by yours
truly. I will not guarantee that they work at all reasonable. Caveat
emptor. But it _is_ simple, and it _is_ safe, since it's all off by
default.
The patch is pretty simple - the biggest part is the new "convert.c" file,
but even that is really just basic stuff that anybody can write in
"Teaching C 101" as a final project for their first class in programming.
Not to say that it's bug-free, of course - but at least we're not talking
about rocket surgery here.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Here's a patch that I think we can merge right now. There may be
other places that need this, but this at least points out the
three places that read/write working tree files for git
update-index, checkout and diff respectively. That should cover
a lot of it [jc: git-apply uses an entirely different codepath
both for reading and writing].
Some day we can actually implement it. In the meantime, this
points out a place for people to start. We *can* even start with
a really simple "we do CRLF conversion automatically, regardless
of filename" kind of approach, that just look at the data (all
three cases have the _full_ file data already in memory) and
says "ok, this is text, so let's convert to/from DOS format
directly".
THAT somebody can write in ten minutes, and it would already
make git much nicer on a DOS/Windows platform, I suspect.
And it would be totally zero-cost if you just make it a config
option (but please make it dynamic with the _default_ just being
0/1 depending on whether it's UNIX/Windows, just so that UNIX
people can _test_ it easily).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The new interface allows an application to temporarily hash a
small number of objects and pretend that they are available in
the object store without actually writing them.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If open_packed_git failed it may have been because the packfile
actually exists and is readable, but some sort of verification
did not pass. In this case open_packed_git left pack_fd filled
in, as the file descriptor is valid. We don't want to leak the
file descriptor, nor do we want to allow someone in the future
to use this packed_git.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Matthias Lederhofer identified a race condition where a Git reader
process was able to locate an object in a packed_git index, but
was then preempted while a `git repack -a -d` ran and completed.
By the time the reader was able to seek in the packfile to get the
object data, the packfile no longer existed on disk.
In this particular case the reader process did not attempt to
open the packfile before it was deleted, so it did not already
have the pack_fd field popuplated. With the packfile itself gone,
there was no way for the reader to open it and fetch the data.
I'm fixing the race condition by teaching find_pack_entry to ignore
a packed_git whose packfile is not currently open and which cannot
be opened. If none of the currently known packs can supply the
object, we will return 0 and the caller will decide the object is
not available. If this is the first attempt at finding an object,
the caller will reprepare_packed_git and try again. If it was
the second attempt, the caller will typically return NULL back,
and an error message about a missing object will be reported.
This patch does not address the situation of a reader which is
being starved out by a tight sequence of `git repack -a -d` runs.
In this particular case the reader will try twice, probably fail
both times, and declare the object in question cannot be found.
As it is highly unlikely that a real world `git repack -a -d` can
complete faster than a reader can open a packfile, so I don't think
this is a huge concern.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Because I want to reuse open_packed_git in a context where I don't
want the process to die if the packfile in question is bogus, I'm
changing its behavior to return error("...") rather than die("...")
when it detects something is wrong with the packfile it was given.
Right now we still must die out of use_pack should open_packed_git
fail, as none of use_pack's callers are prepared to handle a failure
from that function.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
After staring at the comment and the associated for loop, I
realized the comment was completely bogus. The section of
code its talking about is trying to avoid duplicate mapping
of the same packfile.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There is little point in having the linked list insertion code
appearing in install_packed_git, and then again just 30 lines
further down in the same file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We used to call find_pack_entry() twice from read_sha1_file() in order
to avoid printing an error message, when the object did not exist. This
is fixed by moving the call to error() to the only place it really
could be called.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Way back when Junio developed the 64 bit index topic he came up
with a means of changing the .idx file format so that older Git
clients would recognize that they don't understand the file and
refuse to read it, while newer clients could tell the difference
between the old-style and new-style .idx files. Unfortunately
this wasn't recorded anywhere.
This change documents how we might go about changing the .idx
file format by using a special signature in the first four bytes.
Credit (and possible blame) goes completely to Junio for thinking
up this technique.
The change also modifies the error message of the current Git code
so that users get a recommendation to upgrade their Git software
should this version or later encounter a new-style .idx which it
cannot process. We already do this for the .pack files, but since
we usually process the .idx files first its important that these
files are recognized and encourage an upgrade.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Originally I introduced read_or_die for the purpose of reading
the pack header and trailer, and I was too lazy to print proper
error messages.
Linus Torvalds <torvalds@osdl.org>:
> For a read error, at the very least you have to say WHICH FILE
> couldn't be read, because it's usually a matter of some file just
> being too short, not some system-wide problem.
and of course Linus is right. Make it so.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With the new-and-improved write_in_full() semantics, where a partial write
simply always returns a real error (and always sets 'errno' when that
happens, including for the disk full case), a lot of the callers of
write_in_full() were just unnecessarily complex.
In particular, there's no reason to ever check for a zero length or
return: if the length was zero, we'll return zero, otherwise, if a disk
full resulted in the actual write() system call returning zero the
write_in_full() logic would have correctly turned that into a negative
return value, with 'errno' set to ENOSPC.
I really wish every "write_in_full()" user would just check against "<0"
now, but this fixes the nasty and stupid ones.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Unfortunately, while {read,write}_in_full do take into account
zero-sized reads/writes; their die and whine variants do not.
I have a repository where there are zero-sized files in
the history that was triggering these things.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We have a number of badly checked write() calls. Often we are
expecting write() to write exactly the size we requested or fail,
this fails to handle interrupts or short writes. Switch to using
the new write_in_full(). Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xwrite().
Note, the changes to config handling are much larger and handled
in the next patch in the sequence.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We have a number of badly checked read() calls. Often we are
expecting read() to read exactly the size we requested or fail, this
fails to handle interrupts or short reads. Add a read_in_full()
providing those semantics. Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xread().
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I do not have any proof that this matters to any existing
problems I am seeing, but I do not think of any reason not to do
this.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In some cases we did not even bother to check the return value of
mmap() and just assume it worked. This is bad, because if we are
out of virtual address space the kernel returned MAP_FAILED and we
would attempt to dereference that address, segfaulting without any
real error output to the user.
We are replacing all calls to mmap() with xmmap() and moving all
MAP_FAILED checking into that single location. If a mmap call
fails we try to release enough least-recently-used pack windows
to possibly succeed, then retry the mmap() attempt. If we cannot
mmap even after releasing pack memory then we die() as none of our
callers have any reasonable recovery strategy for a failed mmap.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If we are about to fail because this process has run out of memory we
should first try to automatically control our appetite for address
space by releasing enough least-recently-used pack windows to gain
back enough memory such that we might actually be able to meet the
current allocation request.
This should help users who have fairly large repositories but are
working on systems with relatively small virtual address space.
Many times we see reports on the mailing list of these users running
out of memory during various Git operations. Dynamically decreasing
the amount of pack memory used when the demand for heap memory is
increasing is an intelligent solution to this problem.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Much like the alloc_report() function can be useful to report on
object allocation statistics while debugging the new pack_report()
function can be useful to report on the behavior of the mmap window
code used for packfile access.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If a command opens a packfile for only temporary access and does not
install the struct packed_git* into the global packed_git list then
we are unable to unmap any inactive windows within that packed_git,
causing the overall process to exceed core.packedGitLimit.
We cannot force the callers to install their temporary packfile
into the packed_git chain as doing so would allow that (possibly
corrupt but currently being verified) temporary packfile to become
part of the local ODB, which may allow it to be considered for
object resolution when it may not actually be a valid packfile.
So to support unmapping the windows of these temporary packfiles we
also scan the windows of the struct packed_git which was supplied
to use_pack(). Since commands only work with one temporary packfile
at a time scanning the one supplied to use_pack() and all packs
installed into packed_git should cover everything available in
memory.
We also have to be careful to not close the file descriptor of
the packed_git which was handed to use_pack() when all of that
packfile's windows have been unmapped, as we are already past the
open call that would open the packfile and need the file descriptor
to be ready for mmap() after unuse_one_window returns.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If we are unable to mmap the a region of the packfile with the mmap()
system call there may be a good reason why, such as a closed file
descriptor or out of address space. Reporting the system level
error message can help to debug such problems.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This finally turns on the sliding window behavior for packfile data
access by mapping limited size windows and chaining them under the
packed_git->windows list.
We consider a given byte offset to be within the window only if there
would be at least 20 bytes (one hash worth of data) accessible after
the requested offset. This range selection relates to the contract
that use_pack() makes with its callers, allowing them to access
one hash or one object header without needing to call use_pack()
for every byte of data obtained.
In the worst case scenario we will map the same page of data twice
into memory: once at the end of one window and once again at the
start of the next window. This duplicate page mapping will happen
only when an object header or a delta base reference is spanned
over the end of a window and is always limited to just one page of
duplication, as no sane operating system will ever have a page size
smaller than a hash.
I am assuming that the possible wasted page of virtual address
space is going to perform faster than the alternatives, which
would be to copy the object header or ref delta into a temporary
buffer prior to parsing, or to check the window range on every byte
during header parsing. We may decide to revisit this decision in
the future since this is just a gut instinct decision and has not
actually been proven out by experimental testing.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
To support multiple windows per packfile we need to unmap only one
window at a time from that packfile, leaving any other windows in
place and available for reference.
We treat all windows from all packfiles equally; the least recently
used, not-in-use window across all packfiles will always be closed
first.
If we have unmapped all windows in a packfile then we can also close
the packfile's file descriptor as its possible we won't need to map
any window from that file in the near future. This decision about
when to close the pack file descriptor may need to be revisited in
the future after additional testing on several different platforms
can be performed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we parse the object header or the delta base reference we
don't bother to loop over use_pack() calls. The reason we don't
need to bother with calling use_pack for each byte accessed is that
use_pack will always promise us at least 20 bytes (really the hash
size) after the offset. This promise from use_pack simplifies a
lot of code in the header parsing logic, as well as helps out the
zlib library by ensuring there's always some data for it to consume
during an inflate call.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When multiple mmaps start getting used for all pack file access it
is not possible to get all data associated with a specific object
in one contiguous memory region. This limitation prevents simply
passing a single address and length to SHA1_Update or to inflate.
Instead we need to loop until we have processed all data of interest.
As we loop over the data we are always interested in reusing the same
window 'cursor', as the prior window will no longer be of any use
to us. This allows the use_pack() call to automatically decrement
the use count of the prior window before setting up access for us
to the next window.
Within each loop we need to make use of the available length output
parameter of use_pack() to tell us how many bytes are available in
the current memory region, as we cannot tell otherwise.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Part of the implementation concept of the sliding mmap window for
pack access is to permit multiple windows per pack to be mapped
independently. Since the inuse_cnt is associated with the mmap and
not with the file, this value is in struct pack_window and needs to
be incremented/decremented for each pack_window accessed by any code.
To faciliate that implementation we need to replace all uses of
use_packed_git() and unuse_packed_git() with a different API that
follows struct pack_window objects rather than struct packed_git.
The way this works is when we need to start accessing a pack for
the first time we should setup a new window 'cursor' by declaring
a local and setting it to NULL:
struct pack_windows *w_curs = NULL;
To obtain the memory region which contains a specific section of
the pack file we invoke use_pack(), supplying the address of our
current window cursor:
unsigned int len;
unsigned char *addr = use_pack(p, &w_curs, offset, &len);
the returned address `addr` will be the first byte at `offset`
within the pack file. The optional variable len will also be
updated with the number of bytes remaining following the address.
Multiple calls to use_pack() with the same window cursor will
update the window cursor, moving it from one window to another
when necessary. In this way each window cursor variable maintains
only one struct pack_window inuse at a time.
Finally before exiting the scope which originally declared the window
cursor we must invoke unuse_pack() to unuse the current window (which
may be different from the one that was first obtained from use_pack):
unuse_pack(&w_curs);
This implementation is still not complete with regards to multiple
windows, as only one window per pack file is supported right now.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
To efficiently support mmaping of multiple regions of the same pack
file we want to keep the pack's file descriptor open while we are
actively working with that pack. So we are now keeping that file
descriptor in packed_git.pack_fd and closing it only after we unmap
the last window.
This is going to increase the number of file descriptors that are
in use at once, however that will be bounded by the total number of
pack files present and therefore should not be very high. It is
a small tradeoff which we may need to revisit after some testing
can be done on various repositories and systems.
For code clarity we also want to seperate out the implementation
of how we open a pack file from the implementation which locates
a suitable window (or makes a new one) from the given pack file.
Since this is a rather large delta I'm taking advantage of doing
it now, in a fairly isolated change.
When we open a pack file we need to examine the header and trailer
without having a mmap in place, as we may only need to mmap
the middle section of this particular pack. Consequently the
verification code has been refactored to make use of the new
read_or_die function.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The idea behind the sliding mmap window pack reader implementation
is to have multiple mmap regions active against the same pack file,
thereby allowing the process to mmap in only the active/hot sections
of the pack and reduce overall virtual address space usage.
To implement this we need to refactor the mmap related data
(pack_base, pack_use_cnt) out of struct packed_git and move them
into a new struct pack_window.
We are refactoring the code to support a single struct pack_window
per packfile, thereby emulating the prior behavior of mmap'ing the
entire pack file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Rather than hardcoding the maximum number of bytes which can be
mmapped from pack files we should make this value configurable,
allowing the end user to increase or decrease this limit on a
per-repository basis depending on the size of the repository
and the capabilities of their operating system.
In general users should not need to manually tune such a low-level
setting within the core code, but being able to artifically limit
the number of bytes which we can mmap at once from pack files will
make it easier to craft test cases for the new mmap sliding window
implementation.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The unpack_entry_gently function currently has only two callers:
the delta base resolution in sha1_file.c and the main loop of
pack-check.c. Both of these must change to using unpack_entry
directly when we implement sliding window mmap logic, so I'm doing
it earlier to help break down the change set.
This may cause a slight performance decrease for delta base
resolution as well as for pack-check.c's verify_packfile(), as
the pack use counter will be incremented and decremented for every
object that is unpacked.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If ever new object types are added for future extensions then better
have current git version report them as "unknown" instead of
"corrupted".
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We used to try loose objects first with sha1_object_info(), but packed
objects first with read_sha1_file(). Now, prefer packed objects over loose
ones with sha1_object_info(), too.
Usually the old behaviour would pose no problem, but when you tried to fix
a fscked up repository by inserting a known-good pack,
git cat-file $(git cat-file -t <sha1>) <sha1>
could fail, even when
git cat-file blob <sha1>
would _not_ fail. Worse, a repack would fail, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently the error e.g. when pushing to a read-only repository is quite
confusing, this attempts to clean it up, unifies error reporting between
various object writers and uses error() on couple more places.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since keeping a pushed pack or exploding it into loose objects
should be a local repository decision this teaches receive-pack
to decide if it should call unpack-objects or index-pack --stdin
--fix-thin based on the setting of receive.unpackLimit and the
number of objects contained in the received pack.
If the number of objects (hdr_entries) in the received pack is
below the value of receive.unpackLimit (which is 5000 by default)
then we unpack-objects as we have in the past.
If the hdr_entries >= receive.unpackLimit then we call index-pack and
ask it to include our pid and hostname in the .keep file to make it
easier to identify why a given pack has been kept in the repository.
Currently this leaves every received pack as a kept pack. We really
don't want that as received packs will tend to be small. Instead we
want to delete the .keep file automatically after all refs have
been updated. That is being left as room for future improvement.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (90 commits)
gitweb: Better support for non-CSS aware web browsers
gitweb: Output also empty patches in "commitdiff" view
gitweb: Use git-for-each-ref to generate list of heads and/or tags
for-each-ref: "creator" and "creatordate" fields
Add --global option to git-repo-config.
pack-refs: Store the full name of the ref even when packing only tags.
git-clone documentation didn't mention --origin as equivalent of -o
Minor grammar fixes for git-diff-index.txt
link_temp_to_file: call adjust_shared_perm() only when we created the directory
Remove uneccessarily similar printf() from print_ref_list() in builtin-branch
pack-objects doesn't create random pack names
branch: work in subdirectories.
gitweb: Use 's' regexp modifier to secure against filenames with LF
gitweb: Secure against commit-ish/tree-ish with the same name as path
gitweb: esc_html() author in blame
git-svnimport: support for partial imports
link_temp_to_file: don't leave the path truncated on adjust_shared_perm failure
Move deny_non_fast_forwards handling completely into receive-pack.
revision traversal: --unpacked does not limit commit list anymore.
Continue traversal when rev-list --unpacked finds a packed commit.
...
* maint:
git-clone documentation didn't mention --origin as equivalent of -o
Minor grammar fixes for git-diff-index.txt
link_temp_to_file: call adjust_shared_perm() only when we created the directory
This allows us to pass just the file name of a pack rather than
the complete path when we want pack-objects to consider its
contents as though they were loose objects. This can be helpful
if $GIT_OBJECT_DIRECTORY contains shell metacharacters which make
it cumbersome to pass complete paths safely in a shell script.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
