merge-ort was designed to minimize the amount of data needed and used,
and several changes were made to diffcore-rename to take advantage of
extra metadata to enable this data minimization (particularly the
relevant_sources variable for skipping "irrelevant" renames). This
effort obviously succeeded in drastically reducing computation times,
but should also theoretically allow partial clones to download much less
information. Previously, though, the "prefetch" command used in
diffcore-rename had never been modified and downloaded many blobs that
were unnecessary for merge-ort. This commit corrects that.
When doing basename comparisons, we want to fetch only the objects that
will be used for basename comparisons. If after basename fetching this
leaves us with no more relevant sources (or no more destinations), then
we won't need to do the full inexact rename detection and can skip
downloading additional source and destination files. Even if we have to
do that later full inexact rename detection, irrelevant sources are
culled after basename matching and before the full inexact rename
detection, so we can still avoid downloading the blobs for irrelevant
sources. Rename prefetch() to inexact_prefetch(), and introduce a
new basename_prefetch() to take advantage of this.
If we modify the testcase from commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2021-01-23)
to pass
--sparse --filter=blob:none
to the clone command, and use the new trace2 "fetch_count" output from
a few commits ago to track both the number of fetch subcommands invoked
and the number of objects fetched across all those fetches, then for
the mega-renames testcase we observe the following:
BEFORE this commit, rebasing 35 patches:
strategy # of fetches total # of objects fetched
--------- ------------ --------------------------
recursive 62 11423
ort 30 11391
AFTER this commit, rebasing the same 35 patches:
ort 32 63
This means that the new code only needs to download less than 2 blobs
per patch being rebased. That is especially interesting given that the
repository at the start only had approximately half a dozen TOTAL blobs
downloaded to start with (because the default sparse-checkout of just
the toplevel directory was in use).
So, for this particular linux kernel testcase that involved ~26,000
renames on the upstream side (drivers/ -> pilots/) across which 35
patches were being rebased, this change reduces the number of blobs that
need to be downloaded by a factor of ~180.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
estimate_similarity() was setting up a diff_populate_filespec_options
every time it was called, requiring the caller of estimate_similarity()
to pass in some data needed to set up this option. Currently the needed
data consisted of a single variable (skip_unmodified), but we want to
also have the different estimate_similarity() callsites start using
different missing_object_cb functions as well. Rather than also passing
that data in, just have the caller pass in the whole
diff_populate_filespec_options, and reduce the number of times we need to
set it up.
As a side note, this also drops the number of calls to
has_promisor_remote() dramatically. If L is the number of basename
paths to compare, M is the number of inexact sources, and N is the
number of inexact destinations, then the number of calls to
has_promisor_remote() drops from L+M*N down to at most 2 -- one for each
of the sites that calls estimate_similarity(). has_promisor_remote() is
a very fast function so this almost certainly has no measurable
performance impact, but it seems cleaner to avoid calling that function
so many times.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two spaces unaligned to anything is not part of the coding-style. A
single tab is.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to store ran_ff. Now it's obvious from the conditionals.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently "git pull --rebase" takes a shortcut in the case a
fast-forward merge is possible; run_merge() is called with --ff-only.
However, "git merge" didn't have an --autostash option, so, when "git
pull --rebase --autostash" was called *and* the fast-forward merge
shortcut was taken, then the pull failed.
This was fixed in commit f15e7cf5cc (pull: ff --rebase --autostash
works in dirty repo, 2017-06-01) by simply skipping the fast-forward
merge shortcut.
Later on "git merge" learned the --autostash option [a03b55530a
(merge: teach --autostash option, 2020-04-07)], and so did "git pull"
[d9f15d37f1 (pull: pass --autostash to merge, 2020-04-07)].
Therefore it's not necessary to skip the fast-forward merge shortcut
anymore when called with --rebase --autostash.
Let's always take the fast-forward merge shortcut by essentially
reverting f15e7cf5cc.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent update to contrib/completion/git-completion.bash causes bash to fail
auto complete custom commands that are wrapped with __git_func_wrap. Declaring
__git_cmd_idx=0 inside __git_func_wrap resolves the issue.
Signed-off-by: Fabian Wermelinger <fabianw@mavt.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not all systems have a readlink program available for use by the shell.
This causes t3210 to fail on at least AIX. Let's provide a perl
one-liner to do the same thing, and use it there.
I also updated calls in t9802. Nobody reported failure there, but it's
the same issue. Presumably nobody actually tests with p4 on AIX in the
first place (if it is even available there).
I left the use of readlink in the "--valgrind" setup in test-lib.sh, as
valgrind isn't available on exotic platforms anyway (and I didn't want
to increase dependencies between test-lib.sh and test-lib-functions.sh).
There's one other curious case. Commit d2addc3b96 (t7800: readlink may
not be available, 2016-05-31) fixed a similar case. We can't use our
wrapper function there, though, as it's inside a sub-script triggered by
Git. It uses a slightly different technique ("ls" piped to "sed"). I
chose not to use that here as it gives confusing "ls -l" output if the
file is unexpectedly not a symlink (which is OK for its limited use, but
potentially confusing for general use within the test suite). The perl
version emits the empty string.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new function "get_abbrev_oid" to get abbrev object ID. This
function has a default value which helps to prepare a nonempty replace
pattern for sed command. An empty replace pattern may cause sed fail
to allocate memory.
Refactor function "make_user_friendly_and_stable_output" to use
"get_abbrev_oid" to get abbrev object ID.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor function "create_commits_in" to use "test_commit" to create
commit.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before comparing with the expect file, we used to call function
"make_user_friendly_and_stable_output" to filter out trailing spaces in
output. Ævar recommends using pattern "s/Z$//" to prepare expect file,
and then compare it with raw output.
Since we have fixed the issue of occasionally missing the clear-to-eol
suffix when displaying sideband #2 messages, it is safe and stable to
test against raw output.
Suggested-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "demultiplex_sideband()" sees a nonempty message ending with CR or
LF on the sideband #2, it adds "suffix" string to clear to the end of
the current line, which helps when relaying a progress display whose
records are terminated with CRs. But if it sees a single LF, no
clear-to-end suffix should be appended, because this single LF is used
to end the progress display by moving to the next line, and the final
progress display above should be preserved.
However, the code forgot that depending on the length of the payload
line, such a CR may fall exactly at the packet boundary and the
number of bytes before the CR from the beginning of the packet could
be zero. In such a case, the message that was terminated by the CR
were leftover in the "scratch" buffer in the previous call to the
function and we still need to clear to the end of the current line.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ævar reported that the function `make_user_friendly_and_stable_output()`
failed on a i386 box (gcc45) in the gcc farm boxes with error:
sed: couldn't re-allocate memory
It turns out that older versions of bash (4.3) or dash (0.5.7) cannot
evaluate expression like `${A%${A#???????}}` used to get the leading 7
characters of variable A.
Replace the incompatible parameter expansion so that t6020 works on
older version of bash or dash.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Records are added in C# 9
Code example :
public record Person(string FirstName, string LastName);
For more information, see:
* https://docs.microsoft.com/en-us/dotnet/csharp/whats-new/csharp-9
Signed-off-by: Julian Verdurmen <julian.verdurmen@outlook.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These typos were found while searching the codebase for gendered
pronouns. In the case of t9300-fast-import.sh, remove a confusing
comment that is unnecessary to the understanding of the test.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We generally avoid specifying the gender of our users in order to be
more inclusive, but sometimes a few slip by due to habit.
Since by doing a little bit of rewording we can avoid this irrelevant
detail, let's do so.
Inspired-by: Derrick Stolee <dstolee@microsoft.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using gendered pronouns for an anonymous person applies a gender where
none is known and further excludes readers who do not use gendered
pronouns. Avoid such examples in the documentation by using "they" or
passive voice to avoid the need for a pronoun.
Inspired-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a missing test for the behavior of the pre-auto-gc hook added in
0b85d92661 (Documentation/hooks: add pre-auto-gc hook, 2008-04-02).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start by creating an "actual" file in a core.hooksPath test that has
the hook echoing to the "actual" file.
We later test_cmp that file to see what hooks were run. If we fail to
run our hook(s) we'll have an empty list of hooks for the test_cmp
instead of a nonexisting file. For the logic of this test that makes more sense.
See 867ad08a26 (hooks: allow customizing where the hook directory is,
2016-05-04) for the commit that added these tests.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without the "d", it sounds like a command, not an error, and is liable
to be translated incorrectly.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modernize test code added in ce567d1867 (Add test to show that
show-branch misses out the 8th column, 2008-07-23) and
11ee57bc4c (sort_in_topological_order(): avoid setting a commit flag,
2008-07-23) to use test helpers.
I'm renaming "out" to "actual" for consistency with other tests, and
introducing a "branches.sorted" file in the setup, to make it clear
that it's important that the list be sorted in this particular way.
The "show-branch" output is indented with spaces, which would cause
complaints under "git show --check" with an indented here-doc
block. Let's prefix the lines with "> " to work around that, and to
make it clear that the leading whitespace is important.
We can also get rid of the hardcoding of "main" added here in
334afbc76f (tests: mark tests relying on the current default for
`init.defaultBranch`, 2020-11-18). For this test we're setting up an
"initial" commit anyway, and now that we've moved over to test_commit
we can reference that instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the only *show-branch* test file to indicate that more tests
belong it in than just the one-off octopus test it now contains.
The test was initially added in ce567d1867 (Add test to show that
show-branch misses out the 8th column, 2008-07-23) and
11ee57bc4c (sort_in_topological_order(): avoid setting a commit flag,
2008-07-23). Those two add almost the same content, one with a
test_expect_success and the other a test_expect_failure (a bug being
tested for was fixed on one of the branches).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
report_result() sends a struct to the parent process, but that struct
would contain uninitialised padding bytes. Running this code under MSAN
rightly triggers a warning - but we don't particularly care about this
warning because we control the receiving code, and we therefore know
that those padding bytes won't be read on the receiving end.
We could simply suppress this warning under MSAN with the approporiate
ifdef'd attributes, but a less intrusive solution is to 0-initialise the
struct, which guarantees that the padding will also be initialised.
Interestingly, in the error-case branch, we only try to copy the first
two members of pc_item_result, by copying only PC_ITEM_RESULT_BASE_SIZE
bytes. However PC_ITEM_RESULT_BASE_SIZE is defined as
'offsetof(the_last_member)', which means that we're copying padding bytes
after the end of the second last member. We could avoid doing this by
redefining PC_ITEM_RESULT_BASE_SIZE as
'offsetof(second_last_member) + sizeof(second_last_member)', but there's
no huge benefit to doing so (and this patch silences the MSAN warning in
this scenario either way).
MSAN output from t2080 (partially interleaved due to the
parallel work :) ):
Uninitialized bytes in __interceptor_write at offset 12 inside [0x7fff37d83408, 160)
==23279==WARNING: MemorySanitizer: use-of-uninitialized-value
Uninitialized bytes in __interceptor_write at offset 12 inside [0x7ffdb8a07ec8, 160)
==23280==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0xd5ac28 in xwrite /home/ahunt/git/git/wrapper.c:256:8
#1 0xd5b327 in write_in_full /home/ahunt/git/git/wrapper.c:311:21
#2 0xb0a8c4 in do_packet_write /home/ahunt/git/git/pkt-line.c:221:6
#3 0xb0a5fd in packet_write /home/ahunt/git/git/pkt-line.c:242:6
#4 0x4f7441 in report_result /home/ahunt/git/git/builtin/checkout--worker.c:69:2
#5 0x4f6be6 in worker_loop /home/ahunt/git/git/builtin/checkout--worker.c💯3
#6 0x4f68d3 in cmd_checkout__worker /home/ahunt/git/git/builtin/checkout--worker.c:143:2
#7 0x4a1e76 in run_builtin /home/ahunt/git/git/git.c:461:11
#8 0x49e1e7 in handle_builtin /home/ahunt/git/git/git.c:714:3
#9 0x4a0c08 in run_argv /home/ahunt/git/git/git.c:781:4
#10 0x49d5a8 in cmd_main /home/ahunt/git/git/git.c:912:19
#11 0x7974da in main /home/ahunt/git/git/common-main.c:52:11
#12 0x7f8778114349 in __libc_start_main (/lib64/libc.so.6+0x24349)
#13 0x421bd9 in _start /home/abuild/rpmbuild/BUILD/glibc-2.26/csu/../sysdeps/x86_64/start.S:120
Uninitialized value was created by an allocation of 'res' in the stack frame of function 'report_result'
#0 0x4f72c0 in report_result /home/ahunt/git/git/builtin/checkout--worker.c:55
SUMMARY: MemorySanitizer: use-of-uninitialized-value /home/ahunt/git/git/wrapper.c:256:8 in xwrite
Exiting
#0 0xd5ac28 in xwrite /home/ahunt/git/git/wrapper.c:256:8
#1 0xd5b327 in write_in_full /home/ahunt/git/git/wrapper.c:311:21
#2 0xb0a8c4 in do_packet_write /home/ahunt/git/git/pkt-line.c:221:6
#3 0xb0a5fd in packet_write /home/ahunt/git/git/pkt-line.c:242:6
#4 0x4f7441 in report_result /home/ahunt/git/git/builtin/checkout--worker.c:69:2
#5 0x4f6be6 in worker_loop /home/ahunt/git/git/builtin/checkout--worker.c💯3
#6 0x4f68d3 in cmd_checkout__worker /home/ahunt/git/git/builtin/checkout--worker.c:143:2
#7 0x4a1e76 in run_builtin /home/ahunt/git/git/git.c:461:11
#8 0x49e1e7 in handle_builtin /home/ahunt/git/git/git.c:714:3
#9 0x4a0c08 in run_argv /home/ahunt/git/git/git.c:781:4
#10 0x49d5a8 in cmd_main /home/ahunt/git/git/git.c:912:19
#11 0x7974da in main /home/ahunt/git/git/common-main.c:52:11
#12 0x7f2749a0e349 in __libc_start_main (/lib64/libc.so.6+0x24349)
#13 0x421bd9 in _start /home/abuild/rpmbuild/BUILD/glibc-2.26/csu/../sysdeps/x86_64/start.S:120
Uninitialized value was created by an allocation of 'res' in the stack frame of function 'report_result'
#0 0x4f72c0 in report_result /home/ahunt/git/git/builtin/checkout--worker.c:55
SUMMARY: MemorySanitizer: use-of-uninitialized-value /home/ahunt/git/git/wrapper.c:256:8 in xwrite
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cache_entry contains an object_id, and compare_ce_content() would
include that field when calling memcmp on a subset of the cache_entry.
Depending on which hashing algorithm is being used, only part of
object_id.hash is actually being used, therefore including it in a
memcmp() is incorrect. Instead we choose to exclude the object_id when
calling memcmp(), and call oideq() separately.
This issue was found when running t1700-split-index with MSAN, see MSAN
output below (on my machine, offset 76 corresponds to 4 bytes after the
start of object_id.hash).
Uninitialized bytes in MemcmpInterceptorCommon at offset 76 inside [0x7f60e7c00118, 92)
==27914==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x4524ee in memcmp /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/msan/../sanitizer_common/sanitizer_common_interceptors.inc:873:10
#1 0xc867ae in compare_ce_content /home/ahunt/git/git/split-index.c:208:8
#2 0xc859fb in prepare_to_write_split_index /home/ahunt/git/git/split-index.c:336:9
#3 0xb4bbca in write_split_index /home/ahunt/git/git/read-cache.c:3107:2
#4 0xb42b4d in write_locked_index /home/ahunt/git/git/read-cache.c:3295:8
#5 0x638058 in try_merge_strategy /home/ahunt/git/git/builtin/merge.c:758:7
#6 0x63057f in cmd_merge /home/ahunt/git/git/builtin/merge.c:1663:9
#7 0x4a1e76 in run_builtin /home/ahunt/git/git/git.c:461:11
#8 0x49e1e7 in handle_builtin /home/ahunt/git/git/git.c:714:3
#9 0x4a0c08 in run_argv /home/ahunt/git/git/git.c:781:4
#10 0x49d5a8 in cmd_main /home/ahunt/git/git/git.c:912:19
#11 0x7974da in main /home/ahunt/git/git/common-main.c:52:11
#12 0x7f60e928e349 in __libc_start_main (/lib64/libc.so.6+0x24349)
#13 0x421bd9 in _start /home/abuild/rpmbuild/BUILD/glibc-2.26/csu/../sysdeps/x86_64/start.S:120
Uninitialized value was stored to memory at
#0 0x447eb9 in __msan_memcpy /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/msan/msan_interceptors.cpp:1558:3
#1 0xb4d1e6 in dup_cache_entry /home/ahunt/git/git/read-cache.c:3457:2
#2 0xd214fa in add_entry /home/ahunt/git/git/unpack-trees.c:215:18
#3 0xd1fae0 in keep_entry /home/ahunt/git/git/unpack-trees.c:2276:2
#4 0xd1ff9e in twoway_merge /home/ahunt/git/git/unpack-trees.c:2504:11
#5 0xd27028 in call_unpack_fn /home/ahunt/git/git/unpack-trees.c:593:12
#6 0xd2443d in unpack_nondirectories /home/ahunt/git/git/unpack-trees.c:1106:12
#7 0xd19435 in unpack_callback /home/ahunt/git/git/unpack-trees.c:1306:6
#8 0xd0d7ff in traverse_trees /home/ahunt/git/git/tree-walk.c:532:17
#9 0xd1773a in unpack_trees /home/ahunt/git/git/unpack-trees.c:1683:9
#10 0xdc6370 in checkout /home/ahunt/git/git/merge-ort.c:3590:8
#11 0xdc51c3 in merge_switch_to_result /home/ahunt/git/git/merge-ort.c:3728:7
#12 0xa195a9 in merge_ort_recursive /home/ahunt/git/git/merge-ort-wrappers.c:58:2
#13 0x637fff in try_merge_strategy /home/ahunt/git/git/builtin/merge.c:751:12
#14 0x63057f in cmd_merge /home/ahunt/git/git/builtin/merge.c:1663:9
#15 0x4a1e76 in run_builtin /home/ahunt/git/git/git.c:461:11
#16 0x49e1e7 in handle_builtin /home/ahunt/git/git/git.c:714:3
#17 0x4a0c08 in run_argv /home/ahunt/git/git/git.c:781:4
#18 0x49d5a8 in cmd_main /home/ahunt/git/git/git.c:912:19
#19 0x7974da in main /home/ahunt/git/git/common-main.c:52:11
Uninitialized value was created by a heap allocation
#0 0x44e73d in malloc /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/msan/msan_interceptors.cpp:901:3
#1 0xd592f6 in do_xmalloc /home/ahunt/git/git/wrapper.c:41:8
#2 0xd59248 in xmalloc /home/ahunt/git/git/wrapper.c:62:9
#3 0xa17088 in mem_pool_alloc_block /home/ahunt/git/git/mem-pool.c:22:6
#4 0xa16f78 in mem_pool_init /home/ahunt/git/git/mem-pool.c:44:3
#5 0xb481b8 in load_all_cache_entries /home/ahunt/git/git/read-cache.c
#6 0xb44d40 in do_read_index /home/ahunt/git/git/read-cache.c:2298:17
#7 0xb48a1b in read_index_from /home/ahunt/git/git/read-cache.c:2389:8
#8 0xbd5a0b in repo_read_index /home/ahunt/git/git/repository.c:276:8
#9 0xb4bcaf in repo_read_index_unmerged /home/ahunt/git/git/read-cache.c:3326:2
#10 0x62ed26 in cmd_merge /home/ahunt/git/git/builtin/merge.c:1362:6
#11 0x4a1e76 in run_builtin /home/ahunt/git/git/git.c:461:11
#12 0x49e1e7 in handle_builtin /home/ahunt/git/git/git.c:714:3
#13 0x4a0c08 in run_argv /home/ahunt/git/git/git.c:781:4
#14 0x49d5a8 in cmd_main /home/ahunt/git/git/git.c:912:19
#15 0x7974da in main /home/ahunt/git/git/common-main.c:52:11
#16 0x7f60e928e349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: MemorySanitizer: use-of-uninitialized-value /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/msan/../sanitizer_common/sanitizer_common_interceptors.inc:873:10 in memcmp
Exiting
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the mktag --no-strict test to actually test success under
--no-strict, that test was added in 06ce79152b (mktag: add a
--[no-]strict option, 2021-01-06).
It doesn't make sense to check that we have the same failure except
when we want --no-strict, by doing that we're assuming that the
behavior will be different under --no-strict, bun nothing was testing
for that.
We should instead assert that --strict is the same as --no-strict,
except in the cases where we've declared that it's not.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change check_verify_failure() helper to parse out options from
$@. This makes it easier to add new options in the future. See
06ce79152b (mktag: add a --[no-]strict option, 2021-01-06) for the
initial implementation.
Let's also replace "" quotes with '' for the test body, the varables
we need are eval'd into the body, so there's no need for the quoting
confusion.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, both forward and backslash are valid separators. In
22d5507493 (subtree: don't fuss with PATH, 2021-04-27), however, we
added code that assumes that it can only be the forward slash.
Let's fix that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 22d5507493 (subtree: don't fuss with PATH, 2021-04-27), `git
subtree` was broken thoroughly on Windows.
The reason is that it assumes Unix semantics, where `PATH` is
colon-separated, and it assumes that `$GIT_EXEC_PATH:` is a verbatim
prefix of `$PATH`. Neither are true, the latter in particular because
`GIT_EXEC_PATH` is a Windows-style path, while `PATH` is a Unix-style
path list.
Let's make extra certain that `$GIT_EXEC_PATH` and the first component
of `$PATH` refer to different entities before erroring out.
We do that by using the `test <path1> -ef <path2>` command that verifies
that the inode of `<path1>` and of `<path2>` is the same.
Sadly, this construct is non-portable, according to
https://pubs.opengroup.org/onlinepubs/009695399/utilities/test.html.
However, it does not matter in practice because we still first look
whether `$GIT_EXEC_PREFIX` is string-identical to the first component of
`$PATH`. This will give us the expected result everywhere but in Git for
Windows, and Git for Windows' own Bash _does_ handle the `-ef` operator.
Just in case that we _do_ need to show the error message _and_ are
running in a shell that lacks support for `-ef`, we simply suppress the
error output for that part.
This fixes https://github.com/git-for-windows/git/issues/3260
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an object is already mentioned in a reachability bitmap we are
building, then by definition so are all of the objects it can reach. We
have an optimization to stop traversing commits when we see they are
already in the bitmap, but we don't do the same for trees.
It's generally unavoidable to recurse into trees for commits not yet
covered by bitmaps (since most commits generally do have unique
top-level trees). But they usually have subtrees that are shared with
other commits (i.e., all of the subtrees the commit _didn't_ touch). And
some of those commits (and their trees) may be covered by the bitmap.
Usually this isn't _too_ big a deal, because we'll visit those subtrees
only once in total for the whole walk. But if you have a large number of
unbitmapped commits, and if your tree is big, then you may end up
opening a lot of sub-trees for no good reason.
We can use the same optimization we do for commits here: when we are
about to open a tree, see if it's in the bitmap (either the one we are
building, or the "seen" bitmap which covers the UNINTERESTING side of
the bitmap when doing a set-difference).
This works especially well because we'll visit all commits before
hitting any trees. So even in a history like:
A -- B
if "A" has a bitmap on disk but "B" doesn't, we'll already have OR-ed in
the results from A before looking at B's tree (so we really will only
look at trees touched by B).
For most repositories, the timings produced by p5310 are unspectacular.
Here's linux.git:
Test HEAD^ HEAD
--------------------------------------------------------------------
5310.4: simulated clone 6.00(5.90+0.10) 5.98(5.90+0.08) -0.3%
5310.5: simulated fetch 2.98(5.45+0.18) 2.85(5.31+0.18) -4.4%
5310.7: rev-list (commits) 0.32(0.29+0.03) 0.33(0.30+0.03) +3.1%
5310.8: rev-list (objects) 1.48(1.44+0.03) 1.49(1.44+0.05) +0.7%
Any improvement there is within the noise (the +3.1% on test 7 has to be
noise, since we are not recursing into trees, and thus the new code
isn't even run). The results for git.git are likewise uninteresting.
But here are numbers from some other real-world repositories (that are
not public). This one's tree is comparable in size to linux.git, but has
~16k refs (and so less complete bitmap coverage):
Test HEAD^ HEAD
-------------------------------------------------------------------------
5310.4: simulated clone 38.34(39.86+0.74) 33.95(35.53+0.76) -11.5%
5310.5: simulated fetch 2.29(6.31+0.35) 2.20(5.97+0.41) -3.9%
5310.7: rev-list (commits) 0.99(0.86+0.13) 0.96(0.85+0.11) -3.0%
5310.8: rev-list (objects) 11.32(11.04+0.27) 6.59(6.37+0.21) -41.8%
And here's another with a very large tree (~340k entries), and a fairly
large number of refs (~10k):
Test HEAD^ HEAD
-------------------------------------------------------------------------
5310.3: simulated clone 53.83(54.71+1.54) 39.77(40.76+1.50) -26.1%
5310.4: simulated fetch 19.91(20.11+0.56) 19.79(19.98+0.67) -0.6%
5310.6: rev-list (commits) 0.54(0.44+0.11) 0.51(0.43+0.07) -5.6%
5310.7: rev-list (objects) 24.32(23.59+0.73) 9.85(9.49+0.36) -59.5%
This patch provides substantial improvements in these larger cases, and
have any drawbacks for smaller ones (the cost of the bitmap check is
quite small compared to an actual tree traversal).
Note that we have to add a version of revision.c's include_check
callback which handles non-commits. We could possibly consolidate this
into a single callback for all objects types, as there's only one user
of the feature which would need converted (pack-bitmap.c:should_include).
That would in theory let us avoid duplicating any logic. But when I
tried it, the code ended up much worse to read, with lots of repeated
"if it's a commit do this, otherwise do that". Having two separate
callbacks splits that naturally, and matches the existing split of
show_commit/show_object callbacks.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test clean-up.
* ab/test-lib-updates:
test-lib: split up and deprecate test_create_repo()
test-lib: do not show advice about init.defaultBranch under --verbose
test-lib: reformat argument list in test_create_repo()
submodule tests: use symbolic-ref --short to discover branch name
test-lib functions: add --printf option to test_commit
describe tests: convert setup to use test_commit
test-lib functions: add an --annotated option to "test_commit"
test-lib-functions: document test_commit --no-tag
test-lib-functions: reword "test_commit --append" docs
test-lib tests: remove dead GIT_TEST_FRAMEWORK_SELFTEST variable
test-lib: bring $remove_trash out of retirement
The "-m" option in "git log -m" that does not specify which format,
if any, of diff is desired did not have any visible effect; it now
implies some form of diff (by default "--patch") is produced.
* so/log-m-implies-p:
diff-merges: let "-m" imply "-p"
diff-merges: rename "combined_imply_patch" to "merges_imply_patch"
stash list: stop passing "-m" to "git log"
git-svn: stop passing "-m" to "git rev-list"
diff-merges: move specific diff-index "-m" handling to diff-index
t4013: test "git diff-index -m"
t4013: test "git diff-tree -m"
t4013: test "git log -m --stat"
t4013: test "git log -m --raw"
t4013: test that "-m" alone has no effect in "git log"
Optimize out repeated rename detection in a sequence of mergy
operations.
* en/ort-perf-batch-11:
merge-ort, diffcore-rename: employ cached renames when possible
merge-ort: handle interactions of caching and rename/rename(1to1) cases
merge-ort: add helper functions for using cached renames
merge-ort: preserve cached renames for the appropriate side
merge-ort: avoid accidental API mis-use
merge-ort: add code to check for whether cached renames can be reused
merge-ort: populate caches of rename detection results
merge-ort: add data structures for in-memory caching of rename detection
t6429: testcases for remembering renames
fast-rebase: write conflict state to working tree, index, and HEAD
fast-rebase: change assert() to BUG()
Documentation/technical: describe remembering renames optimization
t6423: rename file within directory that other side renamed
"git fetch" over protocol v2 left its side of the socket open after
it finished speaking, which unnecessarily wasted the resource on
the other side.
* jk/fetch-pack-v2-half-close-early:
fetch-pack: signal v2 server that we are done making requests
Use the hashfile API in the codepath that writes the index file to
reduce code duplication.
* ds/write-index-with-hashfile-api:
read-cache: delete unused hashing methods
read-cache: use hashfile instead of git_hash_ctx
csum-file.h: increase hashfile buffer size
hashfile: use write_in_full()
Recent "git clone" left a temporary directory behind when the
transport layer returned an failure.
* jk/clone-clean-upon-transport-error:
clone: clean up directory after transport_fetch_refs() failure
"git send-email" learned the "--sendmail-cmd" command line option
and the "sendemail.sendmailCmd" configuration variable, which is a
more sensible approach than the current way of repurposing the
"smtp-server" that is meant to name the server to instead name the
command to talk to the server.
* ga/send-email-sendmail-cmd:
git-send-email: add option to specify sendmail command
The code to handle the "--format" option in "for-each-ref" and
friends made too many string comparisons on %(atom)s used in the
format string, which has been corrected by converting them into
enum when the format string is parsed.
* zh/ref-filter-atom-type:
ref-filter: introduce enum atom_type
ref-filter: add objectsize to used_atom
Fix typos in documentation, code comments, and RelNotes which repeat
various words. In trivial cases, just delete the duplicated word and
rewrap text, if needed. Reword the affected sentence in
Documentation/RelNotes/1.8.4.txt for it to make sense.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does not make sense to attempt to set MSGFMT_EXE when NO_GETTEXT is
configured, as such add a check for NO_GETTEXT before attempting to set
it.
Suggested-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users have expressed interest in a more "batteries included" way of
building via CMake[1], and a big part of that is providing easier access
to tooling external tools.
A straightforward way to accomplish this is to make it as simple as
possible is to enable the generation of the compile_commands.json file,
which is supported by many tools such as: clang-tidy, clang-format,
sourcetrail, etc.
This does come with a small run-time overhead during the configuration
step (~6 seconds on my machine):
Time to configure with CMAKE_EXPORT_COMPILE_COMMANDS=TRUE
real 1m9.840s
user 0m0.031s
sys 0m0.031s
Time to configure with CMAKE_EXPORT_COMPILE_COMMANDS=FALSE
real 1m3.195s
user 0m0.015s
sys 0m0.015s
This seems like a small enough price to pay to make the project more
accessible to newer users. Additionally there are other large projects
like llvm [2] which has had this enabled by default for >6 years at the
time of this writing, and no real negative consequences that I can find
with my search-skills.
NOTE: That the compile_commands.json is currently produced only when
using the Ninja and Makefile generators. See The CMake documentation[3]
for more info.
1: https://lore.kernel.org/git/CAOjrSZusMSvs7AS-ZDsV8aQUgsF2ZA754vSDjgFKMRgi_oZAWw@mail.gmail.com/
2: 2c5712051b
3: https://cmake.org/cmake/help/latest/variable/CMAKE_EXPORT_COMPILE_COMMANDS.html
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When building on windows users have the option to use vcpkg to provide
the dependencies needed to compile. Previously, this was used only when
using the Visual Studio generator which was not ideal because:
- Not all users who want to use vcpkg use the Visual Studio
generators.
- Some versions of Visual Studio 2019 moved away from using the
VS 2019 generator by default, making it impossible for Visual
Studio to configure the project in the likely event that it couldn't
find the dependencies.
- Inexperienced users of CMake are very likely to get tripped up by
the errors caused by a lack of vcpkg, making the above bullet point
both annoying and hard to debug.
As such, let's make using vcpkg the default on windows. Users who want
to avoid using vcpkg can disable it by passing -DNO_VCPKG=TRUE.
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The multimail project is developed independently and has its own project
page. Traditionally, we shipped a copy in contrib/.
However, such a copy is prone to become stale, and users are much better
served to be directed to the actual project instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ibuf can be reused for multiple iterations of the loop. Specifically:
deflate() overwrites s.avail_in to show how much of the input buffer
has not been processed yet - and sometimes leaves 'avail_in > 0', in
which case ibuf will be processed again during the loop's subsequent
iteration.
But if we declare ibuf within the loop, then (in theory) we get a new
(and uninitialised) buffer for every iteration. In practice, my compiler
seems to resue the same buffer - meaning that this code does work - but
it doesn't seem safe to rely on this behaviour. MSAN correctly catches
this issue - as soon as we hit the 's.avail_in > 0' condition, we end up
reading from what seems to be uninitialised memory.
Therefore, we move ibuf out of the loop, making this reuse safe.
See MSAN output from t1050-large below - the interesting part is the
ibuf creation at the end, although there's a lot of indirection before
we reach the read from unitialised memory:
==11294==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x7f75db58fb1c in crc32_little crc32.c:283:9
#1 0x7f75db58d5b3 in crc32_z crc32.c:220:20
#2 0x7f75db59668c in crc32 crc32.c:242:12
#3 0x8c94f8 in hashwrite csum-file.c:101:15
#4 0x825faf in stream_to_pack bulk-checkin.c:154:5
#5 0x82467b in deflate_to_pack bulk-checkin.c:225:8
#6 0x823ff1 in index_bulk_checkin bulk-checkin.c:264:15
#7 0xa7cff2 in index_stream object-file.c:2234:9
#8 0xa7bff7 in index_fd object-file.c:2256:9
#9 0xa7d22d in index_path object-file.c:2274:7
#10 0xb3c8c9 in add_to_index read-cache.c:802:7
#11 0xb3e039 in add_file_to_index read-cache.c:835:9
#12 0x4a99c3 in add_files add.c:458:7
#13 0x4a7276 in cmd_add add.c:670:18
#14 0x4a1e76 in run_builtin git.c:461:11
#15 0x49e1e7 in handle_builtin git.c:714:3
#16 0x4a0c08 in run_argv git.c:781:4
#17 0x49d5a8 in cmd_main git.c:912:19
#18 0x7974da in main common-main.c:52:11
#19 0x7f75da66f349 in __libc_start_main (/lib64/libc.so.6+0x24349)
#20 0x421bd9 in _start start.S:120
Uninitialized value was stored to memory at
#0 0x7f75db58fa6b in crc32_little crc32.c:283:9
#1 0x7f75db58d5b3 in crc32_z crc32.c:220:20
#2 0x7f75db59668c in crc32 crc32.c:242:12
#3 0x8c94f8 in hashwrite csum-file.c:101:15
#4 0x825faf in stream_to_pack bulk-checkin.c:154:5
#5 0x82467b in deflate_to_pack bulk-checkin.c:225:8
#6 0x823ff1 in index_bulk_checkin bulk-checkin.c:264:15
#7 0xa7cff2 in index_stream object-file.c:2234:9
#8 0xa7bff7 in index_fd object-file.c:2256:9
#9 0xa7d22d in index_path object-file.c:2274:7
#10 0xb3c8c9 in add_to_index read-cache.c:802:7
#11 0xb3e039 in add_file_to_index read-cache.c:835:9
#12 0x4a99c3 in add_files add.c:458:7
#13 0x4a7276 in cmd_add add.c:670:18
#14 0x4a1e76 in run_builtin git.c:461:11
#15 0x49e1e7 in handle_builtin git.c:714:3
#16 0x4a0c08 in run_argv git.c:781:4
#17 0x49d5a8 in cmd_main git.c:912:19
#18 0x7974da in main common-main.c:52:11
#19 0x7f75da66f349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Uninitialized value was stored to memory at
#0 0x447eb9 in __msan_memcpy msan_interceptors.cpp:1558:3
#1 0x7f75db5c2011 in flush_pending deflate.c:746:5
#2 0x7f75db5cafa0 in deflate_stored deflate.c:1815:9
#3 0x7f75db5bb7d2 in deflate deflate.c:1005:34
#4 0xd80b7f in git_deflate zlib.c:244:12
#5 0x825dff in stream_to_pack bulk-checkin.c:140:12
#6 0x82467b in deflate_to_pack bulk-checkin.c:225:8
#7 0x823ff1 in index_bulk_checkin bulk-checkin.c:264:15
#8 0xa7cff2 in index_stream object-file.c:2234:9
#9 0xa7bff7 in index_fd object-file.c:2256:9
#10 0xa7d22d in index_path object-file.c:2274:7
#11 0xb3c8c9 in add_to_index read-cache.c:802:7
#12 0xb3e039 in add_file_to_index read-cache.c:835:9
#13 0x4a99c3 in add_files add.c:458:7
#14 0x4a7276 in cmd_add add.c:670:18
#15 0x4a1e76 in run_builtin git.c:461:11
#16 0x49e1e7 in handle_builtin git.c:714:3
#17 0x4a0c08 in run_argv git.c:781:4
#18 0x49d5a8 in cmd_main git.c:912:19
#19 0x7974da in main common-main.c:52:11
Uninitialized value was stored to memory at
#0 0x447eb9 in __msan_memcpy msan_interceptors.cpp:1558:3
#1 0x7f75db644241 in _tr_stored_block trees.c:873:5
#2 0x7f75db5cad7c in deflate_stored deflate.c:1813:9
#3 0x7f75db5bb7d2 in deflate deflate.c:1005:34
#4 0xd80b7f in git_deflate zlib.c:244:12
#5 0x825dff in stream_to_pack bulk-checkin.c:140:12
#6 0x82467b in deflate_to_pack bulk-checkin.c:225:8
#7 0x823ff1 in index_bulk_checkin bulk-checkin.c:264:15
#8 0xa7cff2 in index_stream object-file.c:2234:9
#9 0xa7bff7 in index_fd object-file.c:2256:9
#10 0xa7d22d in index_path object-file.c:2274:7
#11 0xb3c8c9 in add_to_index read-cache.c:802:7
#12 0xb3e039 in add_file_to_index read-cache.c:835:9
#13 0x4a99c3 in add_files add.c:458:7
#14 0x4a7276 in cmd_add add.c:670:18
#15 0x4a1e76 in run_builtin git.c:461:11
#16 0x49e1e7 in handle_builtin git.c:714:3
#17 0x4a0c08 in run_argv git.c:781:4
#18 0x49d5a8 in cmd_main git.c:912:19
#19 0x7974da in main common-main.c:52:11
Uninitialized value was stored to memory at
#0 0x447eb9 in __msan_memcpy msan_interceptors.cpp:1558:3
#1 0x7f75db5c8fcf in deflate_stored deflate.c:1783:9
#2 0x7f75db5bb7d2 in deflate deflate.c:1005:34
#3 0xd80b7f in git_deflate zlib.c:244:12
#4 0x825dff in stream_to_pack bulk-checkin.c:140:12
#5 0x82467b in deflate_to_pack bulk-checkin.c:225:8
#6 0x823ff1 in index_bulk_checkin bulk-checkin.c:264:15
#7 0xa7cff2 in index_stream object-file.c:2234:9
#8 0xa7bff7 in index_fd object-file.c:2256:9
#9 0xa7d22d in index_path object-file.c:2274:7
#10 0xb3c8c9 in add_to_index read-cache.c:802:7
#11 0xb3e039 in add_file_to_index read-cache.c:835:9
#12 0x4a99c3 in add_files add.c:458:7
#13 0x4a7276 in cmd_add add.c:670:18
#14 0x4a1e76 in run_builtin git.c:461:11
#15 0x49e1e7 in handle_builtin git.c:714:3
#16 0x4a0c08 in run_argv git.c:781:4
#17 0x49d5a8 in cmd_main git.c:912:19
#18 0x7974da in main common-main.c:52:11
#19 0x7f75da66f349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Uninitialized value was stored to memory at
#0 0x447eb9 in __msan_memcpy msan_interceptors.cpp:1558:3
#1 0x7f75db5ea545 in read_buf deflate.c:1181:5
#2 0x7f75db5c97f7 in deflate_stored deflate.c:1791:9
#3 0x7f75db5bb7d2 in deflate deflate.c:1005:34
#4 0xd80b7f in git_deflate zlib.c:244:12
#5 0x825dff in stream_to_pack bulk-checkin.c:140:12
#6 0x82467b in deflate_to_pack bulk-checkin.c:225:8
#7 0x823ff1 in index_bulk_checkin bulk-checkin.c:264:15
#8 0xa7cff2 in index_stream object-file.c:2234:9
#9 0xa7bff7 in index_fd object-file.c:2256:9
#10 0xa7d22d in index_path object-file.c:2274:7
#11 0xb3c8c9 in add_to_index read-cache.c:802:7
#12 0xb3e039 in add_file_to_index read-cache.c:835:9
#13 0x4a99c3 in add_files add.c:458:7
#14 0x4a7276 in cmd_add add.c:670:18
#15 0x4a1e76 in run_builtin git.c:461:11
#16 0x49e1e7 in handle_builtin git.c:714:3
#17 0x4a0c08 in run_argv git.c:781:4
#18 0x49d5a8 in cmd_main git.c:912:19
#19 0x7974da in main common-main.c:52:11
Uninitialized value was created by an allocation of 'ibuf' in the stack frame of function 'stream_to_pack'
#0 0x825710 in stream_to_pack bulk-checkin.c:101
SUMMARY: MemorySanitizer: use-of-uninitialized-value crc32.c:283:9 in crc32_little
Exiting
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When compiling with -O3, some gcc versions (10.2.1 here) complain about
an out-of-bounds subscript:
revision.c: In function ‘do_add_index_objects_to_pending’:
revision.c:321:22: error: array subscript [1, 2147483647] is outside array bounds of ‘char[1]’ [-Werror=array-bounds]
321 | if (0 < len && name[len] && buf.len)
| ~~~~^~~~~
The "len" parameter here comes from calling interpret_branch_name(),
which intends to return the number of characters of "name" it parsed.
But the compiler doesn't realize this. It knows the size of the empty
string "name" passed in from do_add_index_objects_to_pending(), but it
has no clue that the "len" we get back will be constrained to "0" in
that case.
And I don't think the warning is telling us about some subtle or clever
bug. The implementation of interpret_branch_name() is in another file
entirely, and the compiler can't see it (you can even verify there is no
clever LTO going on by replacing it with "return 0" and still getting
the warning).
We can work around this by replacing our "did we hit the trailing NUL"
subscript dereference with a length check. We do not even have to pay
the cost for an extra strlen(), as we can pass our new length into
interpret_branch_name(), which was converting our "0" into a call to
strlen() anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
