The documentation tries to consistently spell "GPG"; when
referring to the specific program name, "gpg" is used.
* dn/gpg-doc:
Documentation: GPG capitalization
The documentation set has been updated so that literal commands,
configuration variables and environment variables are consistently
typeset in fixed-width font and bold in manpages.
* tr/doc-tt:
doc: change configuration variables format
doc: more consistency in environment variables format
doc: change environment variables format
doc: clearer rule about formatting literals
Before this change,
$ echo "* text=auto" >.gitattributes
$ echo "* eol=crlf" >>.gitattributes
would have the same effect as
$ echo "* text" >.gitattributes
$ git config core.eol crlf
Since the 'eol' attribute had higher priority than 'text=auto', this may
corrupt binary files and is not what most users expect to happen.
Make the 'eol' attribute to obey 'text=auto' and now
$ echo "* text=auto" >.gitattributes
$ echo "* eol=crlf" >>.gitattributes
behaves the same as
$ echo "* text=auto" >.gitattributes
$ git config core.eol crlf
In other words,
$ echo "* text=auto eol=crlf" >.gitattributes
has the same effect as
$ git config core.autocrlf true
and
$ echo "* text=auto eol=lf" >.gitattributes
has the same effect as
$ git config core.autocrlf input
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the "remote -> local" line, if either ref is a substring of the
other, the common part in the other string is replaced with "*". For
example
abc -> origin/abc
refs/pull/123/head -> pull/123
become
abc -> origin/*
refs/*/head -> pull/123
Activated with fetch.output=compact.
For the record, this output is not perfect. A single giant ref can
push all refs very far to the right and likely be wrapped around. We
may have a few options:
- exclude these long lines smarter
- break the line after "->", exclude it from column width calculation
- implement a new format, { -> origin/}foo, which makes the problem
go away at the cost of a bit harder to read
- reverse all the arrows so we have "* <- looong-ref", again still
hard to read.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is an application of the newly added CodingGuidelines to HEAD and
variants like FETCH_HEAD. It was obtained with:
perl -pi -e "s/'([A-Z_]*HEAD)'/\`\$1\`/g" *.txt
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current practice is:
git/Documentation$ git grep "'HEAD'" | wc -l
24
git/Documentation$ git grep "\`HEAD\`" | wc -l
66
Let's adopt the majority as a guideline.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was obtained with:
perl -pi -e "s/'--'/\`--\`/g" *.txt
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similarly to the previous commit, use backquotes instead of
forward-quotes, for long options.
This was obtained with:
perl -pi -e "s/'(--[a-z][a-z=<>-]*)'/\`\$1\`/g" *.txt
and manual tweak to remove false positive in ascii-art (o'--o'--o' to
describe rewritten history).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was common in our documentation to surround short option names with
forward quotes, which renders as italic in HTML. Instead, use backquotes
which renders as monospace. This is one more step toward conformance to
Documentation/CodingGuidelines.
This was obtained with:
perl -pi -e "s/'(-[a-z])'/\`\$1\`/g" *.txt
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace spaces with tabs to avoid a warning when further patches change
these lines.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the fetch flag code consistent with push, where '-' means
deleted ref.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This documents the ref update status of fetch. The structure of this
output is defined in [1]. The ouput content is refined a bit in [2]
[3] [4].
This patch is a copy from git-push.txt, modified a bit because the
flag '-' means different things in push (delete) and fetch (tag
update).
PS. For code archaeologists, the discussion mentioned in [1] is
probably [5].
[1] 165f390 (git-fetch: more terse fetch output - 2007-11-03)
[2] 6315472 (fetch: report local storage errors ... - 2008-06-26)
[3] f360d84 (builtin-fetch: add --prune option - 2009-11-10)
[4] 0997ada (fetch: describe new refs based on where... - 2012-04-16)
[5] http://thread.gmane.org/gmane.comp.version-control.git/61657
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation tries to consistently spell "GPG"; when
referring to the specific program name, "gpg" is used.
* dn/gpg-doc:
Documentation: GPG capitalization
The documentation set has been updated so that literal commands,
configuration variables and environment variables are consistently
typeset in fixed-width font and bold in manpages.
* tr/doc-tt:
doc: change configuration variables format
doc: more consistency in environment variables format
doc: change environment variables format
doc: clearer rule about formatting literals
It has always been command-list.txt even at the time this
new-command.txt document is added.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users may want to always use "--show-signature" while using git-log and
related commands.
When log.showSignature is set to true, git-log and related commands will
behave as if "--show-signature" was given to them.
Note that this config variable is meant to affect git-log, git-show,
git-whatchanged and git-reflog. Other commands like git-format-patch,
git-rev-list are not to be affected by this config variable.
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the only remaining attribute that is commonly
supported (at least by xterm) that we don't support. Let's
add it for completeness.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already support bold, underline, and similar attributes.
Let's add italic to the mix. According to the Wikipedia
page on ANSI colors, this attribute is "not widely
supported", but it does seem to work on my xterm.
We don't have to bump the maximum color size because we were
already over-allocating it (but we do adjust the comment
appropriately).
Requested-by: Simon Courtois <scourtois@cubyx.fr>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using "no-bold" rather than "nobold" is easier to read and
more natural to type (to me, anyway, even though I was the
person who introduced "nobold" in the first place). It's
easy to allow both.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a general cleanup of the description of colors in
git-config, mostly to address inaccuracies and confusion
that had grown over time:
- you can have many attributes, not just one
- the discussion flip-flopped between colors and
attributes; now we discuss everything about colors, then
everything about attributes
- many concepts were lumped into the first paragraph,
making it hard to read, and especially to find the
actual lists of colors and attributes. I stopped short
of breaking those out into their own lists, as it seemed
like an excessive use of vertical screen real estate.
- we introduced negated attributes, but then the next
paragraph basically explains how each item starts off
with no attributes. So why would one need negated
attributes? We now explain.
- minor typo, language, and typography fixes
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
http://git-htmldocs.googlecode.com/git/git.html says
There was no service found for the uri requested.
Link to the rendered documentation on Jekyll instead.
Reported-by: Andrea Stacchiotti <andreastacchiotti@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In v2.9.0, we prematurely flipped the default to force cloning
submodules shallowly, when the superproject is getting cloned
shallowly. This is likely to fail when the upstream repositories
submodules are cloned from a repository that is not prepared to
serve histories that ends at a commit that is not at the tip of a
branch, and we know the world is not yet ready.
Use a safer default to clone the submodules fully, unless the user
tells us that she knows that the upstream repository of the
submodules are willing to cooperate with "--shallow-submodules"
option.
Noticed-by: Vadim Eisenberg <VADIME@il.ibm.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree add" learned that '-' can be used as a short-hand for
"@{-1}", the previous branch.
* jg/dash-is-last-branch-in-worktree-add:
worktree: allow "-" short-hand for @{-1} in add command
An upstream project can make a recommendation to shallowly clone
some submodules in the .gitmodules file it ships.
* sb/submodule-recommend-shallowness:
submodule update: learn `--[no-]recommend-shallow` option
submodule-config: keep shallow recommendation around
"git fast-import" learned the same performance trick to avoid
creating too small a packfile as "git fetch" and "git push" have,
using *.unpackLimit configuration.
* ew/fast-import-unpack-limit:
fast-import: invalidate pack_id references after loosening
fast-import: implement unpack limit
We use different types of signature formats in different places.
Set up the infrastructure and overview to describe them systematically
in our technical documentation.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "GPG" is used in a sentence it is now consistently capitalized.
When referring to the binary it is left as "gpg".
Signed-off-by: David Nicolson <david.nicolson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add example usage to the git-svn documentation.
Reported-by: Joseph Pecoraro <pecoraro@apple.com>
Signed-off-by: Alfred Perlstein <alfred@freebsd.org>
Reviewed-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you use "repack -adk" currently, we will pack all objects
that are already packed into the new pack, and then drop the
old packs. However, loose unreachable objects will be left
as-is. In theory these are meant to expire eventually with
"git prune". But if you are using "repack -k", you probably
want to keep things forever and therefore do not run "git
prune" at all. Meaning those loose objects may build up over
time and end up fooling any object-count heuristics (such as
the one done by "gc --auto", though since git-gc does not
support "repack -k", this really applies to whatever custom
scripts people might have driving "repack -k").
With this patch, we instead stuff any loose unreachable
objects into the pack along with the already-packed
unreachable objects. This may seem wasteful, but it is
really no more so than using "repack -k" in the first place.
We are at a slight disadvantage, in that we have no useful
ordering for the result, or names to hand to the delta code.
However, this is again no worse than what "repack -k" is
already doing for the packed objects. The packing of these
objects doesn't matter much because they should not be
accessed frequently (unless they actually _do_ become
referenced, but then they would get moved to a different
part of the packfile during the next repack).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usual way to do a full repack (and what is done by
git-gc) is to run "repack -Ad --unpack-unreachable=<when>",
which will loosen any unreachable objects newer than
"<when>", and drop any older ones.
This is a safer alternative to "repack -ad", because
"<when>" becomes a grace period during which we will not
drop any new objects that are about to be referenced.
However, it isn't perfectly safe. It's always possible that
a process is about to reference an old object. Even if that
process were to take care to update the timestamp on the
object, there is no atomicity with a simultaneously running
"repack" process.
So while unlikely, there is a small race wherein we may drop
an object that is in the process of being referenced. If you
do automated repacking on a large number of active
repositories, you may hit it eventually, and the result is a
corrupted repository.
It would be nice to fix that race in the long run, but it's
complicated. In the meantime, there is a much simpler
strategy for automated repository maintenance: do not drop
objects at all. We already have a "--keep-unreachable"
option in pack-objects; we just need to plumb it through
from git-repack.
Note that this _isn't_ plumbed through from git-gc, so at
this point it's strictly a tool for people doing their own
advanced repository maintenance strategy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was added back in 7e52f56 (gc: do not explode objects
which will be immediately pruned, 2012-04-07), but not
documented at the time, since it was an internal detail
between git-gc and git-repack. However, as people with
complicated setups may want to effectively reimplement the
steps of git-gc themselves, it is nice for us to document
these interfaces.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was changed in 10a6cc8 (fetch --prune: Run prune before
fetching, 2014-01-02), but it seems that nobody in that
discussion realized we were advertising the "after"
explicitly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It turns out that the earlier effort to update the heuristics may
want to use a bit more time to mature. Turn it off by default.
* jk/diff-compact-heuristic:
diff: disable compaction heuristic for now
http://lkml.kernel.org/g/20160610075043.GA13411@sigill.intra.peff.net
reports that a change to add a new "function" with common ending
with the existing one at the end of the file is shown like this:
def foo
do_foo_stuff()
+ common_ending()
+end
+
+def bar
+ do_bar_stuff()
+
common_ending()
end
when the new heuristic is in use. In reality, the change is to add
the blank line before "def bar" and everything below, which is what
the code without the new heuristic shows.
Disable the heuristics by default, and resurrect the documentation
for the option and the configuration variables, while clearly
marking the feature as still experimental.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change configuration variables that where in italic style
to monospace font according to the guideline. It was obtained with
grep '[[:alpha:]]*\.[[:alpha:]]*::$' config.txt | \
sed -e 's/::$//' -e 's/\./\\\\./' | \
xargs -iP perl -pi -e "s/\'P\'/\`P\`/g" ./*.txt
Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org>
Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org>
Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wrap with backticks (monospaced font) unwrapped or single-quotes wrapped
(italic type) environment variables which are followed by the word
"environment". It was obtained with:
perl -pi -e "s/\'?(\\\$?[0-9A-Z\_]+)\'?(?= environment ?)/\`\1\`/g" *.txt
One of the main purposes is to stick to the CodingGuidelines as possible so
that people writting new documentation by mimicking the existing are more likely
to have it right (even if they didn't read the CodingGuidelines).
Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org>
Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org>
Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change GIT_* variables that where in italic style to monospaced font
according to the guideline. It was obtained with
perl -pi -e "s/\'(GIT_.*?)\'/\`\1\`/g" *.txt
One of the main purposes is to stick to the CodingGuidelines as possible so
that people writting new documentation by mimicking the existing are more likely
to have it right (even if they didn't read the CodingGuidelines).
Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org>
Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org>
Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the guideline text that we want for our documentation clearer.
Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org>
Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org>
Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of bugs around core.autocrlf have been fixed.
* tb/core-eol-fix:
convert.c: ident + core.autocrlf didn't work
t0027: test cases for combined attributes
convert: allow core.autocrlf=input and core.eol=crlf
t0027: make commit_chk_wrnNNO() reliable
Combined with "git format-patch --pretty=mboxrd", this should
allow us to round-trip commit messages with embedded mbox
"From " lines without corruption.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will allow us to parse the output of --pretty=mboxrd
and the output of other mboxrd generators.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CSS is widely used, motivating it being included as a built-in pattern.
It must be noted that the word_regex for CSS (i.e. the regex defining
what is a word in the language) does not consider '.' and '#' characters
(in CSS selectors) to be part of the word. This behavior is documented
by the test t/t4018/css-rule.
The logic behind this behavior is the following: identifiers in CSS
selectors are identifiers in a HTML/XML document. Therefore, the '.'/'#'
character are not part of the identifier, but an indicator of the nature
of the identifier in HTML/XML (class or id). Diffing ".class1" and
".class2" must show that the class name is changed, but we still are
selecting a class.
Logic behind the "pattern" regex is:
1. reject lines ending with a colon/semicolon (properties)
2. if a line begins with a name in column 1, pick the whole line
Credits to Johannes Sixt (j6t@kdbg.org) for the pattern regex and most
of the tests.
Signed-off-by: William Duclot <william.duclot@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The manpage output of our documentation did not render well in
terminal; typeset literals in bold by default to make them stand
out more.
* em/man-bold-literal:
Documentation: bold literals in man
"git cherry-pick --help" had three instances of word "behavior",
one of which was spelled "behaviour", which is updated to match the
other two.
* pa/cherry-pick-doc-typo:
git-cherry-pick.txt: correct a small typo
When upload-pack serves a client request, it turns to
pack-objects to do the heavy lifting of creating a
packfile. There's no easy way to intercept the call to
pack-objects, but there are a few good reasons to want to do
so:
1. If you're debugging a client or server issue with
fetching, you may want to store a copy of the generated
packfile.
2. If you're gathering data from real-world fetches for
performance analysis or debugging, storing a copy of
the arguments and stdin lets you replay the pack
generation at your leisure.
3. You may want to insert a caching layer around
pack-objects; it is the most CPU- and memory-intensive
part of serving a fetch, and its output is a pure
function[1] of its input, making it an ideal place to
consolidate identical requests.
This patch adds a simple "hook" interface to intercept calls
to pack-objects. The new test demonstrates how it can be
used for debugging (using it for caching is a
straightforward extension; the tricky part is writing the
actual caching layer).
This hook is unlike the normal hook scripts found in the
"hooks/" directory of a repository. Because we promise that
upload-pack is safe to run in an untrusted repository, we
cannot execute arbitrary code or commands found in the
repository (neither in hooks/, nor in the config). So
instead, this hook is triggered from a config variable that
is explicitly ignored in the per-repo config.
The config variable holds the actual shell command to run as
the hook. Another approach would be to simply treat it as a
boolean: "should I respect the upload-pack hooks in this
repo?", and then run the script from "hooks/" as we usually
do. However, that isn't as flexible; there's no way to run a
hook approved by the site administrator (e.g., in
"/etc/gitconfig") on a repository whose contents are not
trusted. The approach taken by this patch is more
fine-grained, if a little less conventional for git hooks
(it does behave similar to other configured commands like
diff.external, etc).
[1] Pack-objects isn't _actually_ a pure function. Its
output depends on the exact packing of the object
database, and if multi-threading is used for delta
compression, can even differ racily. But for the
purposes of caching, that's OK; of the many possible
outputs for a given input, it is sufficient only that we
output one of them.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct faulty recommendation to use "git submodule deinit ." when
de-initialising all submodules, which would result in a strange
error message in a pathological corner case.
* sb/submodule-deinit-all:
submodule deinit: require '--all' instead of '.' for all submodules
"http.cookieFile" configuration variable clearly wants a pathname,
but we forgot to treat it as such by e.g. applying tilde expansion.
* bn/http-cookiefile-config:
http: expand http.cookieFile as a path
Documentation: config: improve word ordering for http.cookieFile
Since `git worktree add` uses `git checkout` when `[<branch>]` is used,
and `git checkout -` is already supported, it makes sense to allow the
same shortcut in `git worktree add`.
Signed-off-by: Jordan DE GEA <jordan.de-gea@grenoble-inp.org>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Backticks are emphasized through monospaced styling in the HTML
version of Git documentation. But they were left unstyled in the
manual pages.
To make the man pages more comfortably read, `MAN_BOLD_LITERAL` was
added by 5121a6d (Documentation: option to render literal text as
bold for manpages, 2009-03-27). It allowed the user to build the
manpages with literals in bold style.
For precaution it was not set by default back then.
Since 79c461d (docs: default to more modern toolset, 2010-11-19), it
is assumed ASCIIDOC 8 and at least docbook-xsl 1.73 are used, so the
need for compatibility concern is much lessor now.
Remove `MAN_BOLD_LITERAL`, and typeset literals as bold by default .
Add `NO_MAN_BOLD_LITERAL`, a new Makefile option, disabling this
feature when defined.
Signed-off-by: Erwan MATHONIERE <erwan.mathoniere@grenoble-inp.org>
Signed-off-by: Samuel GROOT <samuel.groot@grenoble-inp.org>
Signed-off-by: Tom RUSSELLO <tom.russello@grenoble-inp.org>
Signed-off-by: Matthieu MOY <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the parse-options API rather than a hand-rolled option parser.
Description for --stateless-rpc and --advertise-refs come from
42526b4 (Add stateless RPC options to upload-pack,
receive-pack, 2009-10-30).
Signed-off-by: Antoine Queru <antoine.queru@grenoble-inp.org>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We forgot to add "git log --decorate=auto" to documentation when we
added the feature back in v2.1.0 timeframe.
* rj/log-decorate-auto:
log: document the --decorate=auto option
Most of the document mentions `behavior` instead of the British
variation, `behaviour`. This change makes it consistent.
Signed-off-by: Pablo Santiago Blum de Aguiar <scorphus@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For those who use two-factor authentication with gmail, git-send-email
will not work unless it is setup with an app-specific password. The
example for setting up git-send-email for use with gmail will now
include information on generating and storing the app-specific password.
Signed-off-by: Michael Rappazzo <rappazzo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes the history of a submodule is not considered important by
the projects upstream. To make it easier for downstream users, allow
a boolean field 'submodule.<name>.shallow' in .gitmodules, which can
be used to recommend whether upstream considers the history important.
This field is honored in the initial clone by default, it can be
ignored by giving the `--no-recommend-shallow` option.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, .git and optionally any files whose name starts with a
dot are now marked as hidden, with a core.hideDotFiles knob to
customize this behaviour.
* js/windows-dotgit:
mingw: remove unnecessary definition
mingw: introduce the 'core.hideDotFiles' setting
Documentation for "git merge --verify-signatures" has been updated
to clarify that the signature of only the commit at the tip is
verified. Also the phrasing used for signature and key validity is
adjusted to align with that used by OpenPGP.
* kf/gpg-sig-verification-doc:
Documentation: clarify signature verification
Implement the GIT_TRACE_CURL environment variable to allow a
greater degree of detail of GIT_CURL_VERBOSE, in particular
the complete transport header and all the data payload exchanged.
It might be useful if a particular situation could require a more
thorough debugging analysis. Document the new GIT_TRACE_CURL
environment variable.
Helped-by: Torsten Bögershausen <tboegi@web.de>
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is probably not the best order. But it makes it no-brainer to know
where to insert new commands. At some point we might want to reorder at
least the synopsis part again, grouping commonly use subcommands together.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Find common mistakes when writing gitlink: in our documentation and
drive the check from "make check-docs".
I am not entirely happy with the way the script chooses what input
file to validate, but it is not worse than not having anything, so
let's move it forward and have the logic improved later when people
care about it deeply.
* jc/doc-lint:
ci: validate "linkgit:" in documentation
"git commit" learned to pay attention to "commit.verbose"
configuration variable and act as if "--verbose" option was
given from the command line.
* pb/commit-verbose-config:
commit: add a commit.verbose config variable
t7507-commit-verbose: improve test coverage by testing number of diffs
parse-options.c: make OPTION_COUNTUP respect "unspecified" values
t/t7507: improve test coverage
t0040-parse-options: improve test coverage
test-parse-options: print quiet as integer
t0040-test-parse-options.sh: fix style issues
"git format-patch" learned a new "--base" option to record what
(public, well-known) commit the original series was built on in
its output.
* xy/format-patch-base:
format-patch: introduce format.useAutoBase configuration
format-patch: introduce --base=auto option
format-patch: add '--base' option to record base tree info
patch-ids: make commit_patch_id() a public helper function
A couple of bugs around core.autocrlf have been fixed.
* tb/core-eol-fix:
convert.c: ident + core.autocrlf didn't work
t0027: test cases for combined attributes
convert: allow core.autocrlf=input and core.eol=crlf
t0027: make commit_chk_wrnNNO() reliable
Documentation for "git merge --verify-signatures" has been updated
to clarify that the signature of only the commit at the tip is
verified. Also the phrasing used for signature and key validity is
adjusted to align with that used by OpenPGP.
* kf/gpg-sig-verification-doc:
Documentation: clarify signature verification
On Windows, .git and optionally any files whose name starts with a
dot are now marked as hidden, with a core.hideDotFiles knob to
customize this behaviour.
* js/windows-dotgit:
mingw: remove unnecessary definition
mingw: introduce the 'core.hideDotFiles' setting
Correct faulty recommendation to use "git submodule deinit ." when
de-initialising all submodules, which would result in a strange
error message in a pathological corner case.
* sb/submodule-deinit-all:
submodule deinit: require '--all' instead of '.' for all submodules
Consolidate description of tilde-expansion that is done to
configuration variables that take pathname to a single place.
* jc/config-pathname-type:
config: describe 'pathname' value type
"http.cookieFile" configuration variable clearly wants a pathname,
but we forgot to treat it as such by e.g. applying tilde expansion.
* bn/http-cookiefile-config:
http: expand http.cookieFile as a path
Documentation: config: improve word ordering for http.cookieFile
A new configuration variable core.hooksPath allows customizing
where the hook directory is.
* ab/hooks:
hooks: allow customizing where the hook directory is
githooks.txt: minor improvements to the grammar & phrasing
githooks.txt: amend dangerous advice about 'update' hook ACL
githooks.txt: improve the intro section
"git commit-tree" plumbing command required the user to always sign
its result when the user sets the commit.gpgsign configuration
variable, which was an ancient mistake. Rework "git rebase" that
relied on this mistake so that it reads commit.gpgsign and pass (or
not pass) the -S option to "git commit-tree" to keep the end-user
expectation the same, while teaching "git commit-tree" to ignore
the configuration variable. This will stop requiring the users to
sign commit objects used internally as an implementation detail of
"git stash".
* jc/commit-tree-ignore-commit-gpgsign:
commit-tree: do not pay attention to commit.gpgsign
Clarify that "merge --verify-signatures" checks the signature on the
tip commit of the history being merged.
Uniformise the vocabulary used wrt. key/signature validity with OpenPGP:
- a signature is valid if made by a key with a valid uid;
- in the default trust-model, a uid is valid if signed by a trusted key;
- a key is trusted if the (local) user set a trust level for it.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Keller Fuchs <KellerFuchs@hashbang.sh>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With many incremental imports, small packs become highly
inefficient due to the need to readdir scan and load many
indices to locate even a single object. Frequent repacking and
consolidation may be prohibitively expensive in terms of disk
I/O, especially in large repositories where the initial packs
were aggressively optimized and marked with .keep files.
In those cases, users may be better served with loose objects
and relying on "git gc --auto".
This changes the default behavior of fast-import for small
imports found in test cases, so adjustments to t9300 were
necessary.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Unix (and Linux), files and directories whose names start with a dot
are usually not shown by default. This convention is used by Git: the
.git/ directory should be left alone by regular users, and only accessed
through Git itself.
On Windows, no such convention exists. Instead, there is an explicit flag
to mark files or directories as hidden.
In the early days, Git for Windows did not mark the .git/ directory (or
for that matter, any file or directory whose name starts with a dot)
hidden. This lead to quite a bit of confusion, and even loss of data.
Consequently, Git for Windows introduced the core.hideDotFiles setting,
with three possible values: true, false, and dotGitOnly, defaulting to
marking only the .git/ directory as hidden.
The rationale: users do not need to access .git/ directly, and indeed (as
was demonstrated) should not really see that directory, either. However,
not all dot files should be hidden by default, as e.g. Eclipse does not
show them (and the user would therefore be unable to see, say, a
.gitattributes file).
In over five years since the last attempt to bring this patch into core
Git, a slightly buggy version of this patch has served Git for Windows'
users well: no single report indicated problems with the hidden .git/
directory, and the stream of problems caused by the previously non-hidden
.git/ directory simply stopped. The bugs have been fixed during the
process of getting this patch upstream.
Note that there is a funny quirk we have to pay attention to when
creating hidden files: we use Win32's _wopen() function which
transmogrifies its arguments and hands off to Win32's CreateFile()
function. That latter function errors out with ERROR_ACCESS_DENIED (the
equivalent of EACCES) when the equivalent of the O_CREAT flag was passed
and the file attributes (including the hidden flag) do not match an
existing file's. And _wopen() accepts no parameter that would be
transmogrified into said hidden flag. Therefore, we simply try again
without O_CREAT.
A slightly different method is required for our fopen()/freopen()
function as we cannot even *remove* the implicit O_CREAT flag.
Therefore, we briefly mark existing files as unhidden when opening them
via fopen()/freopen().
The ERROR_ACCESS_DENIED error can also be triggered by opening a file
that is marked as a system file (which is unlikely to be tracked in
Git), and by trying to create a file that has *just* been deleted and is
awaiting the last open handles to be released (which would be handled
better by the "Try again?" logic, a story for a different patch series,
though). In both cases, it does not matter much if we try again without
the O_CREAT flag, read: it does not hurt, either.
For details how ERROR_ACCESS_DENIED can be triggered, see
https://msdn.microsoft.com/en-us/library/windows/desktop/aa363858
Original-patch-by: Erik Faye-Lund <kusmabite@gmail.com>
Initial-Test-By: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is easy to add incorrect "linkgit:<page>[<section>]" references
to our documentation suite. Catch these common classes of errors:
* Referring to Documentation/<page>.txt that does not exist.
* Referring to a <page> outside the Git suite. In general, <page>
must begin with "git".
* Listing the manual <section> incorrectly. The first line of the
Documentation/<page>.txt must end with "(<section>)".
with a new script "ci/lint-gitlink", and drive it from "make check-docs".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add commit.verbose configuration variable as a convenience for those
who always prefer --verbose.
Add tests to check the behavior introduced by this commit and also to
verify that behavior of status doesn't break because of this commit.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a handful of incorrect "linkgit:<page>[<section>]"
instances in our documentation set.
* Some have an extra colon after "linkgit:"; fix them by removing
the extra colon;
* Some refer to a page outside the Git suite, namely curl(1); fix
them by using the `curl(1)` that already appears on the same page
for the same purpose of referring the readers to its manual page.
* Some spell the name of the page incorrectly, e.g. "rev-list" when
they mean "git-rev-list"; fix them.
* Some list the manual section incorrectly; fix them to make sure
they match what is at the top of the target of the link.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HTTP transport clients learned to throw extra HTTP headers at the
server, specified via http.extraHeader configuration variable.
* js/http-custom-headers:
http: support sending custom HTTP headers
Many instances of duplicate words (e.g. "the the path") and
a few typoes are fixed, originally in multiple patches.
wildmatch: fix duplicate words of "the"
t: fix duplicate words of "output"
transport-helper: fix duplicate words of "read"
Git.pm: fix duplicate words of "return"
path: fix duplicate words of "look"
pack-protocol.txt: fix duplicate words of "the"
precompose-utf8: fix typo of "sequences"
split-index: fix typo
worktree.c: fix typo
remote-ext: fix typo
utf8: fix duplicate words of "the"
git-cvsserver: fix duplicate words
Signed-off-by: Li Peng <lip@dtdream.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't consistently use `backticks` for formatting shell variables.
This patch improves the consistency on shell variables (and a few nearby
mentions of "gpg" commands), though it still doesn't straighten out the
use of "quotes."
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The discussion in [1] pointed out that '.' is a faulty suggestion as
there is a corner case where it fails:
> "submodule deinit ." may have "worked" in the sense that you would
> have at least one path in your tree and avoided this "nothing
> matches" most of the time. It would have still failed with the
> exactly same error if run in an empty repository, i.e.
>
> $ E=/var/tmp/x/empty && rm -fr "$E" && mkdir -p "$E" && cd "$E"
> $ git init
> $ rungit v2.6.6 submodule deinit .
> error: pathspec '.' did not match any file(s) known to git.
> Did you forget to 'git add'?
> $ >file && git add file
> $ rungit v2.6.6 submodule deinit .
> $ echo $?
> 0
So instead of a pathspec add the '--all' option to deinit all submodules
and add a test to check for the corner case of an empty repository.
The code only needs to learn about the '--all' option and doesn't
require further changes as `git submodule--helper list "$@"` will list
all submodules when "$@" is empty.
[1] http://news.gmane.org/gmane.comp.version-control.git/289535
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OPT_COUNTUP() merely increments the counter upon --option, and resets it
to 0 upon --no-option, which means that there is no "unspecified" value
with which a client can initialize the counter to determine whether or
not --[no]-option was seen at all.
Make OPT_COUNTUP() treat any negative number as an "unspecified" value
to address this shortcoming. In particular, if a client initializes the
counter to -1, then if it is still -1 after parse_options(), then
neither --option nor --no-option was seen; if it is 0, then --no-option
was seen last, and if it is 1 or greater, than --option was seen last.
This change does not affect the behavior of existing clients because
they all use the initial value of 0 (or more).
Note that builtin/clean.c initializes the variable used with
OPT__FORCE (which uses OPT_COUNTUP()) to a negative value, but it is set
to either 0 or 1 by reading the configuration before the code calls
parse_options(), i.e. as far as parse_options() is concerned, the
initial value of the variable is not negative.
To test this behavior, in test-parse-options.c, "verbose" is set to
"unspecified" while quiet is set to 0 which will test the new behavior
with all sets of values.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the hardcoded lookup for .git/hooks/* to optionally lookup in
$(git config core.hooksPath)/* instead.
This is essentially a more intrusive version of the git-init ability to
specify hooks on init time via init templates.
The difference between that facility and this feature is that this can
be set up after the fact via e.g. ~/.gitconfig or /etc/gitconfig to
apply for all your personal repositories, or all repositories on the
system.
I plan on using this on a centralized Git server where users can create
arbitrary repositories under /gitroot, but I'd like to manage all the
hooks that should be run centrally via a unified dispatch mechanism.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change:
* Sentences that needed "the" or "a" to either add those or change them
so they don't need them.
* The little tangent about "You can use this to do X (if your project
wants to do X)" can just be shortened to "if you want to do X".
* s/parameter/parameters/ when the plural made more sense.
Most of this goes all the way back to the initial introduction of
hooks.txt in 6d35cc76 (Document hooks., 2005-09-02).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Any ACL you implement via an 'update' hook isn't actual access control
if the user has login access to the machine running git, because they
can trivially just build their own version of Git which doesn't run the
hook.
Change the documentation to take this dangerous edge case into account,
and remove the mention of the advice originating on the mailing list,
the users reading this don't care where the idea came up.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the documentation so that:
* We don't talk about "little scripts". Hooks can be as big as you
want, and don't have to be scripts, just call them "programs".
* We note that we change the working directory before a hook is called,
nothing documented this explicitly, but the current behavior is
predictable. It helps a lot to know what directory these hooks will
be executed from.
* We don't make claims about the example hooks which may not be true
depending on the configuration of 'init.templateDir'. Clarify that
we're talking about the default settings of git-init in those cases,
and move some of this documentation into git-init's documentation
about the default templates.
* We briefly note in the intro that hooks can get their arguments in
various different ways, and that how exactly is described below for
each hook.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should handle .gitconfig files that specify things like:
[http]
cookieFile = "~/.gitcookies"
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a dedicated section for various value-types used in the
configuration variables already, because we needed to describe how
booleans and scaled integers can be spelled, and the pathname type
would fit there.
Adjust the description of `include.path`, `core.excludesFile` and
`commit.template` variables slightly to clarify that these variables
are of this type.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ba3c69a9 (commit: teach --gpg-sign option, 2011-10-05) introduced a
"signed commit" by teaching the --[no]-gpg-sign option and the
commit.gpgsign configuration variable to various commands that
create commits.
Teaching these to "git commit" and "git merge", both of which are
end-user facing Porcelain commands, was perfectly fine. Allowing
the plumbing "git commit-tree" to suddenly change the behaviour to
surprise the scripts by paying attention to commit.gpgsign was not.
Among the in-tree scripts, filter-branch, quiltimport, rebase and
stash are the commands that run "commit-tree". If any of these
wants to allow users to always sign every single commit, they should
offer their own configuration (e.g. "filterBranch.gpgsign") with an
option to disable signing (e.g. "git filter-branch --no-gpgsign").
Ignoring commit.gpgsign option _obviously_ breaks the backward
compatibility, but it is easy to follow the standard pattern in
scripts to honor whatever configuration variable they choose to
follow. E.g.
case $(git config --bool commit.gpgsign) in
true) sign=-S ;;
*) sign= ;;
esac &&
git commit-tree $sign ...whatever other args...
Do so to make sure that "git rebase" keeps paying attention to the
configuration variable, which unfortunately is a documented mistake.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch --help" showed `-s` and `--no-patch` as if these
are valid options to the command. We already hide `--patch` option
from the documentation, because format-patch is about showing the
diff, and the documentation now hides these options as well.
* es/format-patch-doc-hide-no-patch:
git-format-patch.txt: don't show -s as shorthand for multiple options
The repository set-up sequence has been streamlined (the biggest
change is that there is no longer git_config_early()), so that we
do not attempt to look into refs/* when we know we do not have a
Git repository.
* jk/check-repository-format:
verify_repository_format: mark messages for translation
setup: drop repository_format_version global
setup: unify repository version callbacks
init: use setup.c's repo version verification
setup: refactor repo format reading and verification
config: drop git_config_early
check_repository_format_gently: stop using git_config_early
lazily load core.sharedrepository
wrap shared_repository global in get/set accessors
setup: document check_repository_format()
Also change UK english "behaviour" to US english "behavior".
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that people around here are all happy with the updated
heuristics used to decide where the hunks are separated. Let's keep
that as the default. Even though we do not expect too much trouble
from the difference between the old and the new algorithms, just in
case let's leave the implementation of the knobs to turn it off for
emergencies. There is no longer need for documenting them, though.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be tempting for a server admin to want a stable set of
long-lived packs for dumb clients; but also want to enable bitmaps
to serve smart clients more quickly.
Unfortunately, such a configuration is impossible; so at least warn
users of this incompatibility since commit 21134714 (pack-objects:
turn off bitmaps when we split packs, 2014-10-16).
Tested the warning by inspecting the output of:
make -C t t5310-pack-bitmaps.sh GIT_TEST_OPTS=-v
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We introduce a way to send custom HTTP headers with all requests.
This allows us, for example, to send an extra token from build agents
for temporary access to private repositories. (This is the use case that
triggered this patch.)
This feature can be used like this:
git -c http.extraheader='Secret: sssh!' fetch $URL $REF
Note that `curl_easy_setopt(..., CURLOPT_HTTPHEADER, ...)` takes only
a single list, overriding any previous call. This means we have to
collect _all_ of the headers we want to use into a single list, and
feed it to cURL in one shot. Since we already unconditionally set a
"pragma" header when initializing the curl handles, we can add our new
headers to that list.
For callers which override the default header list (like probe_rpc),
we provide `http_copy_default_headers()` so they can do the same
trick.
Big thanks to Jeff King and Junio Hamano for their outstanding help and
patient reviews.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The possible reasons for exiting are now ordered by the exit code value.
While at it, rewrite the `can not write to the config file` to
`the config file cannot be written` to be grammatically correct and a
proper sentence.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows to record the base commit automatically, it is equivalent
to set --base=auto in cmdline.
The format.useAutoBase has lower priority than command line option,
so if user set format.useAutoBase and pass the command line option in
the meantime, base_commit will be the one passed to command line
option.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce --base=auto to record the base commit info automatically, the
base_commit will be the merge base of tip commit of the upstream branch
and revision-range specified in cmdline.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Maintainers or third party testers may want to know the exact base tree
the patch series applies to. Teach git format-patch a '--base' option
to record the base tree info and append it at the end of the first
message (either the cover letter or the first patch in the series).
The base tree info consists of the "base commit", which is a well-known
commit that is part of the stable part of the project history everybody
else works off of, and zero or more "prerequisite patches", which are
well-known patches in flight that is not yet part of the "base commit"
that need to be applied on top of "base commit" in topological order
before the patches can be applied.
The "base commit" is shown as "base-commit: " followed by the 40-hex of
the commit object name. A "prerequisite patch" is shown as
"prerequisite-patch-id: " followed by the 40-hex "patch id", which can
be obtained by passing the patch through the "git patch-id --stable"
command.
Imagine that on top of the public commit P, you applied well-known
patches X, Y and Z from somebody else, and then built your three-patch
series A, B, C, the history would be like:
---P---X---Y---Z---A---B---C
With "git format-patch --base=P -3 C" (or variants thereof, e.g. with
"--cover-letter" of using "Z..C" instead of "-3 C" to specify the
range), the base tree information block is shown at the end of the
first message the command outputs (either the first patch, or the
cover letter), like this:
base-commit: P
prerequisite-patch-id: X
prerequisite-patch-id: Y
prerequisite-patch-id: Z
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a shallow clone of a repository with submodules, the depth
argument does not influence the submodules, i.e. the submodules are done
as non-shallow clones. It is unclear what the best default is for the
depth of submodules of a shallow clone, so we need to have the possibility
to do all kinds of combinations:
* shallow super project with shallow submodules
e.g. build bots starting always from scratch. They want to transmit
the least amount of network data as well as using the least amount
of space on their hard drive.
* shallow super project with unshallow submodules
e.g. The superproject is just there to track a collection of repositories
and it is not important to have the relationship between the repositories
intact. However the history of the individual submodules matter.
* unshallow super project with shallow submodules
e.g. The superproject is the actual project and the submodule is a
library which is rarely touched.
The new switch to select submodules to be shallow or unshallow supports
all of these three cases.
It is easy to transition from the first to the second case by just
unshallowing the submodules (`git submodule foreach git fetch
--unshallow`), but it is not possible to transition from the second to the
first case (as we would have already transmitted the non shallow over
the network). That is why we want to make the first case the default in
case of a shallow super project. This leads to the inconvenience in the
second case with the shallow super project and unshallow submodules,
as you need to pass `--no-shallow-submodules`.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the configuration parser errors out when core.autocrlf
is set to 'input' when core.eol is set to 'crlf', there is no need
to do so, because the core.autocrlf setting trumps core.eol.
Allow all combinations of core.crlf and core.eol and document
that core.autocrlf overrides core.eol.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit said:
We could add the same option to "git pull" and have it passed
through to underlying "git merge". I do not have a fundamental
opposition against such a feature, but this commit does not do
so and instead leaves it as low-hanging fruit for others,
because such a "two project merge" would be done after fetching
the other project into some location in the working tree of an
existing project and making sure how well they fit together, it
is sufficient to allow a local merge without such an option
pass-through from "git pull" to "git merge".
Prepare a patch to make it a reality, just in case it is needed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to produce the smallest possible diff and combine several diff
hunks together, we implement a heuristic from GNU Diff which moves diff
hunks forward as far as possible when we find common context above and
below a diff hunk. This sometimes produces less readable diffs when
writing C, Shell, or other programming languages, ie:
...
/*
+ *
+ *
+ */
+
+/*
...
instead of the more readable equivalent of
...
+/*
+ *
+ *
+ */
+
/*
...
Implement the following heuristic to (optionally) produce the desired
output.
If there are diff chunks which can be shifted around, shift each hunk
such that the last common empty line is below the chunk with the rest
of the context above.
This heuristic appears to resolve the above example and several other
common issues without producing significantly weird results. However, as
with any heuristic it is not really known whether this will always be
more optimal. Thus, it can be disabled via diff.compactionHeuristic.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fetching of history by naming a commit object name directly didn't
work across remote-curl transport.
* gf/fetch-pack-direct-object-fetch:
fetch-pack: update the documentation for "<refs>..." arguments
fetch-pack: fix object_id of exact sha1
"git config --get-urlmatch", unlike other variants of the "git
config --get" family, did not signal error with its exit status
when there was no matching configuration.
* jk/config-get-urlmatch:
Documentation/git-config: fix --get-all description
Documentation/git-config: use bulleted list for exit codes
config: fail if --get-urlmatch finds no value
When "git log" shows the log message indented by 4-spaces, the
remainder of a line after a HT does not align in the way the author
originally intended. The command now expands tabs by default in
such a case, and allows the users to override it with a new option,
'--no-expand-tabs'.
* lt/pretty-expand-tabs:
pretty: test --expand-tabs
pretty: allow tweaking tabwidth in --expand-tabs
pretty: enable --expand-tabs by default for selected pretty formats
pretty: expand tabs in indented logs to make things line up properly
"git pull --rebase" learned "--[no-]autostash" option, so that
the rebase.autostash configuration variable set to true can be
overridden from the command line.
* mj/pull-rebase-autostash:
t5520: test --[no-]autostash with pull.rebase=true
t5520: reduce commom lines of code
t5520: factor out common "failing autostash" code
t5520: factor out common "successful autostash" code
t5520: use better test to check stderr output
t5520: ensure consistent test conditions
t5520: use consistent capitalization in test titles
pull --rebase: add --[no-]autostash flag
git-pull.c: introduce git_pull_config()
"git format-patch --help" showed `-s` and `--no-patch` as if these
are valid options to the command. We already hide `--patch` option
from the documentation, because format-patch is about showing the
diff, and the documentation now hides these options as well.
* es/format-patch-doc-hide-no-patch:
git-format-patch.txt: don't show -s as shorthand for multiple options
"git worktree add" can be given "--no-checkout" option to only
create an empty worktree without checking out the files.
* rz/worktree-no-checkout:
worktree: add: introduce --checkout option
The repository set-up sequence has been streamlined (the biggest
change is that there is no longer git_config_early()), so that we
do not attempt to look into refs/* when we know we do not have a
Git repository.
* jk/check-repository-format:
verify_repository_format: mark messages for translation
setup: drop repository_format_version global
setup: unify repository version callbacks
init: use setup.c's repo version verification
setup: refactor repo format reading and verification
config: drop git_config_early
check_repository_format_gently: stop using git_config_early
lazily load core.sharedrepository
wrap shared_repository global in get/set accessors
setup: document check_repository_format()
"git merge" used to allow merging two branches that have no common
base by default, which led to a brand new history of an existing
project created and then get pulled by an unsuspecting maintainer,
which allowed an unnecessary parallel history merged into the
existing project. The command has been taught not to allow this by
default, with an escape hatch "--allow-unrelated-histories" option
to be used in a rare event that merges histories of two projects
that started their lives independently.
* jc/merge-refuse-new-root:
merge: refuse to create too cool a merge by default
"git tag" can create an annotated tag without explicitly given an
"-a" (or "-s") option (i.e. when a tag message is given). A new
configuration variable, tag.forceSignAnnotated, can be used to tell
the command to create signed tag in such a situation.
* la/tag-force-signing-annotated-tags:
tag: add the option to force signing of annotated tags
"git rebase -x" can be used without passing "-i" option.
* sb/rebase-x:
t3404: cleanup double empty lines between tests
rebase: decouple --exec from --interactive
A major part of "git submodule update" has been ported to C to take
advantage of the recently added framework to run download tasks in
parallel.
* sb/submodule-parallel-update:
clone: allow an explicit argument for parallel submodule clones
submodule update: expose parallelism to the user
submodule helper: remove double 'fatal: ' prefix
git submodule update: have a dedicated helper for cloning
run_processes_parallel: rename parameters for the callbacks
run_processes_parallel: treat output of children as byte array
submodule update: direct error message to stderr
fetching submodules: respect `submodule.fetchJobs` config option
submodule-config: drop check against NULL
submodule-config: keep update strategy around
The correct api is trace_printf_key(), not trace_print_key().
Also do not throw a random string at printf(3)-like function;
instead, feed it as a parameter that is fed to a "%s" conversion
specifier.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-format-patch recognizes -s as shorthand only for --signoff, however,
its documentation shows -s as shorthand for both --signoff and
--no-patch. Resolve this confusion by suppressing the bogus -s shorthand
for --no-patch.
While here, also avoid showing the --no-patch option in git-format-patch
documentation since it doesn't make sense to ask to suppress the patch
while at the same time explicitly asking to format the patch (which,
after all, is the purpose of git-format-patch).
Reported-by: Kevin Brodsky <corax26@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fetching of history by naming a commit object name directly didn't
work across remote-curl transport.
* gf/fetch-pack-direct-object-fetch:
fetch-pack: update the documentation for "<refs>..." arguments
fetch-pack: fix object_id of exact sha1
"git config --get-urlmatch", unlike other variants of the "git
config --get" family, did not signal error with its exit status
when there was no matching configuration.
* jk/config-get-urlmatch:
Documentation/git-config: fix --get-all description
Documentation/git-config: use bulleted list for exit codes
config: fail if --get-urlmatch finds no value
The credential.helper configuration variable is cumulative and
there is no good way to override it from the command line. As
a special case, giving an empty string as its value now serves
as the signal to clear the values specified in various files.
* jk/credential-clear-config:
credential: let empty credential specs reset helper list
The end-user facing Porcelain level commands like "diff" and "log"
now enables the rename detection by default.
* mm/diff-renames-default:
diff: activate diff.renames by default
log: introduce init_log_defaults()
t: add tests for diff.renames (true/false/unset)
t4001-diff-rename: wrap file creations in a test
Documentation/diff-config: fix description of diff.renames
'git for-each-ref's manpage says that '--contains' only lists tags,
but it lists all kinds of refs.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the local convention of the project is to use tab width that is
not 8, it may make sense to allow "git log --expand-tabs=<n>" to
tweak the output to match it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --pretty={medium,full,fuller}" and "git log" by default
prepend 4 spaces to the log message, so it makes sense to enable
the new "expand-tabs" facility by default for these formats.
Add --no-expand-tabs option to override the new default.
The change alone breaks a test in t4201 that runs "git shortlog"
on the output from "git log", and expects that the output from
"git log" does not do such a tab expansion. Adjust the test to
explicitly disable expand-tabs with --no-expand-tabs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A commit log message sometimes tries to line things up using tabs,
assuming fixed-width font with the standard 8-place tab settings.
Viewing such a commit however does not work well in "git log", as
we indent the lines by prefixing 4 spaces in front of them.
This should all line up:
Column 1 Column 2
-------- --------
A B
ABCD EFGH
SPACES Instead of Tabs
Even with multi-byte UTF8 characters:
Column 1 Column 2
-------- --------
Ä B
åäö 100
A Møøse once bit my sister..
Tab-expand the lines in "git log --expand-tabs" output before
prefixing 4 spaces.
This is based on the patch by Linus Torvalds, but at this step, we
require an explicit command line option to enable the behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By adding this option which defaults to true, we can use the
corresponding --no-checkout to make some customizations before
the checkout, like sparse checkout, etc.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Ray Zhang <zhanglei002@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OPT_CMDMODE mechanism was introduced in the release of 1.8.5 to actively
notice when multiple "operation mode" options that specify mutually
incompatible operation modes are given.
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While it makes sense to allow merging unrelated histories of two
projects that started independently into one, in the way "gitk" was
merged to "git" itself aka "the coolest merge ever", such a merge is
still an unusual event. Worse, if somebody creates an independent
history by starting from a tarball of an established project and
sends a pull request to the original project, "git merge" however
happily creates such a merge without any sign of something unusual
is happening.
Teach "git merge" to refuse to create such a merge by default,
unless the user passes a new "--allow-unrelated-histories" option to
tell it that the user is aware that two unrelated projects are
merged.
Because such a "two project merge" is a rare event, a configuration
option to always allow such a merge is not added.
We could add the same option to "git pull" and have it passed
through to underlying "git merge". I do not have a fundamental
opposition against such a feature, but this commit does not do so
and instead leaves it as low-hanging fruit for others, because such
a "two project merge" would be done after fetching the other project
into some location in the working tree of an existing project and
making sure how well they fit together, it is sufficient to allow a
local merge without such an option pass-through from "git pull" to
"git merge". Many tests that are updated by this patch does the
pass-through manually by turning:
git pull something
into its equivalent:
git fetch something &&
git merge --allow-unrelated-histories FETCH_HEAD
If somebody is inclined to add such an option, updated tests in this
change need to be adjusted back to:
git pull --allow-unrelated-histories something
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Noticed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `tag.forcesignannotated` configuration variable makes "git tag"
that would implicitly create an annotated tag to instead create a
signed tag. For example
$ git tag -m "This is a message" tag-with-message
$ git tag -F message-file tag-with-message
would create a signed tag if the configuration variable is in
effect. To override this from the command line, the user can
explicitly ask for an annotated tag, like so:
$ git tag -a -m "This is a message" tag-with-message
$ git tag -a -F message-file tag-with-message
Creation of a light-weight tag, i.e.
$ git tag lightweight
is not affected.
Signed-off-by: Laurent Arnoud <laurent@spkdev.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If rebase.autoStash configuration variable is set, there is no way to
override it for "git pull --rebase" from the command line.
Teach "git pull --rebase" the --[no-]autostash command line flag which
overrides the current value of rebase.autoStash, if set. As "git rebase"
understands the --[no-]autostash option, it's just a matter of passing
the option to underlying "git rebase" when "git pull --rebase" is called.
Helped-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Paul Tan <pyokagan@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the later steps of preparing a patch series I do not want to
edit or reorder the patches any more, but just make sure the
test suite passes after each patch and also to fix breakage
right there if some of the steps fail. I could run
EDITOR=true git rebase -i <anchor> -x "make test"
but it would be simpler if it can be spelled like so:
git rebase <anchor> -x "make test"
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.5:
Git 2.5.5
Git 2.4.11
list-objects: pass full pathname to callbacks
list-objects: drop name_path entirely
list-objects: convert name_path to a strbuf
show_object_with_name: simplify by using path_name()
http-push: stop using name_path
tree-diff: catch integer overflow in combine_diff_path allocation
add helpers for detecting size_t overflow
* maint-2.4:
Git 2.4.11
list-objects: pass full pathname to callbacks
list-objects: drop name_path entirely
list-objects: convert name_path to a strbuf
show_object_with_name: simplify by using path_name()
http-push: stop using name_path
tree-diff: catch integer overflow in combine_diff_path allocation
add helpers for detecting size_t overflow
The two alternative ways to spell "ssh://" transport have been
deprecated for a long time. The last mention of them has finally
removed from the documentation.
* cn/deprecate-ssh-git-url:
Disown ssh+git and git+ssh
Map a P4 user to a specific name and email address in Git with the
"git-p4.mapUser" config. The config value must be a string adhering
to the format "p4user = First Lastname <email@address.com>".
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expand the area of globs applicability for branches and tags
in git-svn. It is now possible to use globs like 'a*e', or 'release_*'.
This allows users to avoid long lines in config like:
branches = branches/{release_20,release_21,release_22,...}
In favor of:
branches = branches/release_*
[ew: amended commit message, minor formatting and style fixes]
Signed-off-by: Victor Leschuk <vleschuk@accesssoftek.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
There are no more callers, and it's a rather confusing
interface. This could just be folded into
git_config_with_options(), but for the sake of readability,
we'll leave it as a separate (static) helper function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation did not clearly state that the 'simple' mode is
now the default for "git push" when push.default configuration is
not set.
* mm/push-simple-doc:
Documentation/git-push: document that 'simple' is the default
* jk/tighten-alloc: (23 commits)
compat/mingw: brown paper bag fix for 50a6c8e
ewah: convert to REALLOC_ARRAY, etc
convert ewah/bitmap code to use xmalloc
diff_populate_gitlink: use a strbuf
transport_anonymize_url: use xstrfmt
git-compat-util: drop mempcpy compat code
sequencer: simplify memory allocation of get_message
test-path-utils: fix normalize_path_copy output buffer size
fetch-pack: simplify add_sought_entry
fast-import: simplify allocation in start_packfile
write_untracked_extension: use FLEX_ALLOC helper
prepare_{git,shell}_cmd: use argv_array
use st_add and st_mult for allocation size computation
convert trivial cases to FLEX_ARRAY macros
use xmallocz to avoid size arithmetic
convert trivial cases to ALLOC_ARRAY
convert manual allocations to argv_array
argv-array: add detach function
add helpers for allocating flex-array structs
harden REALLOC_ARRAY and xcalloc against size_t overflow
...
