All tests in t6035 are protected by SYMLINKS. But that is not necessary,
because a lot of the functionality can be tested provided symbolic link
entries enter the index and object data base. Use test_ln_s_add for this
purpose.
Some test cases do test the presence of symbolic links on the file system.
Move these tests into separate test cases that remain protected by
SYMLINKS.
There is one instance of expect_failure. There is a possibility that this
test case fails differently depending on whether SYMLINKS is present or
not; but this is not the case.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t4023 and t4114, we have to remove the entries using 'git rm' because
otherwise the entries that must turn from symbolic links to regular files
would stay symbolic links in the index. For the same reason, we have to
use 'git mv' instead of plain 'mv' in t3509.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This undoes the special casing introduced in this test by 704a3143
(Use prerequisite tags to skip tests that depend on symbolic links,
2009-03-04).
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test cases include many corner-cases of merge-recursive's behavior,
some of them involve type changes and symbolic links. All cases, including
those that are protected by SYMLINKS check only whether the result of
merge-recursive is correctly stored in the database and the index; the
file system is not investigated. Use test_ln_s_add to enter a symbolic
link in the index in the test setup and run the tests without the
SYMLINKS prerequisite.
Notice that one test that has the SYMLINKS protection removed is an
expect_failure. There is a possibility that the test fails differently
depending on whether SYMLINKS is present or not; but this is not the case
presently.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0000-basic hard-codes many object IDs. To cater to file systems that do
not support symbolic links, different IDs are used depending on the
SYMLINKS prerequisite. But we can observe the symbolic links are only
needed to generate index entries. Use test_ln_s_add to generate the
index entries and get rid of explicit SYMLINKS checks.
This undoes the special casing introduced in this test by 704a3143
(Use prerequisite tags to skip tests that depend on symbolic links,
2009-03-04).
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many instances where the treatment of symbolic links in the
object model and the algorithms are tested, but where it is not
necessary to actually have a symbolic link in the worktree. Make
adjustments to the tests and remove the SYMLINKS prerequisite when
appropriate in trivial cases, where "trivial" means:
- merely a replacement of 'ln -s a b && git add b' by test_ln_s_add
is needed;
- a test for symbolic link on the file system can be split off (and
remains protected by SYMLINKS);
- existing code is equivalent to test_ln_s_add.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new function that creates a symbolic link and adds it to the index
to be used in cases where a symbolic link is not required on the file
system. We will use it to remove many SYMLINKS prerequisites from test
cases.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular:
- move test preparations inside test_expect_success
- place test description on the test_expect_success line
- indent with a tab
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users can sanitize from address manually.
Verify that these are suppressed properly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
add test where sender address needs to be quoted.
Make sure --suppress-cc=self works well in this case.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check that suppress-cc=self works when applied
to output of cccmd.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a test wants to make sure there is no <string> in an output
file, we should just say "! grep string output".
"test_must_fail" is there only to test Git command and catch unusual
deaths we know about (e.g. segv) as an error, not as an expected
failure. "test_must_fail grep string output" is unnecessary, as
we are not making sure the system binaries do not dump core or
anything like that.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a basic test for --suppress-cc=self
option of git send-email.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of 95c6f271 "dir.c: unify is_excluded and is_path_excluded APIs", the
is_excluded API no longer recurses into directories that match an ignore
pattern, and returns the directory's ignored state for all contained paths.
This is OK for normal ignore patterns, i.e. ignoring a directory affects
the entire contents recursively.
Unfortunately, this also "works" for negated ignore patterns ('!dir'), i.e.
the entire contents is "not-ignored" recursively, regardless of ignore
patterns that match the contents directly.
In prep_exclude, skip recursing into a directory only if it is really
ignored (i.e. the ignore pattern is not negated).
Signed-off-by: Karsten Blees <blees@dcon.de>
Tested-by: Øystein Walle <oystwa@gmail.com>
Reviewed-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Case folding is not done correctly when matching against the [:upper:]
character class and uppercased character ranges (e.g. A-Z).
Specifically, an uppercase letter fails to match against any of them
when case folding is requested because plain characters in the pattern
and the whole string are preemptively lowercased to handle the base case
fast.
That optimization is kept and ISLOWER() is used in the [:upper:] case
when case folding is requested, while matching against a character range
is retried with toupper() if the character was lowercase, as the bounds
of the range itself cannot be modified (in a case-insensitive context,
[A-_] is not equivalent to [a-_]).
Signed-off-by: Anthony Ramine <n.oxyde@gmail.com>
Reviewed-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are some index handling subtleties in 'commit --only' that are
best tested when we have an existing index, but an unborn or empty
HEAD. These circumstances are easily produced by 'checkout --orphan',
but we did not previously have a test for it.
The main expected failure mode would be: erroneously loading the
existing index contents when building the temporary index that is used
for --only. Cf.
http://article.gmane.org/gmane.comp.version-control.git/225969
and subsequent discussion.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The temporary directory prepared by "difftool --dir-diff" to
show the result of a change can be modified by the user via
the tree diff program, and we try hard not to lose changes
to them after tree diff program returns to us.
However, the set of files to be copied back is computed
differently between --symlinks and --no-symlinks modes. The
former checks all paths that start out as identical to the
working tree file, while the latter checks paths that
already had a local modification in the working tree,
allowing changes made in the tree diff program to paths that
did not have any local change to be lost.
Signed-off-by: Kenichi Saita <nitoyon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are rebasing without options ('am' mode), the head rebased lives
in '$g/rebase-apply/head-name', so lets use that information so it's
reported the same way as if we were doing other rebases (-i or -m).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an empty message is specified with the option -m of git commit then
the editor is started. That's unexpected and unnecessary. Instead of
using the length of the message string for checking if the user
specified one, directly remember if the option -m was given.
Reported-by: Mislav Marohnić <mislav.marohnic@gmail.com>
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In diff_tree_combined we make a copy of diffopts. In
try_to_follow_renames, called via diff_tree_sha1, we free and
re-initialize diffopts->pathspec->items. Since we did not make a deep
copy of diffopts in diff_tree_combined, the original diffopts does not
get the update. By the time we return from diff_tree_combined,
rev->diffopt->pathspec->items points to an invalid memory address. We
get a segfault next time we try to access that pathspec.
Instead, along with the copy of diffopts, make a copy pathspec->items as
well.
We would also have to make a copy of pathspec->raw to keep it consistent
with pathspec->items, but nobody seems to rely on that.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
index-pack --strict looks up and follows parent commits. If shallow
information is not ready by the time index-pack is run, index-pack may
be led to non-existent objects. Make fetch-pack save shallow file to
disk before invoking index-pack.
git learns new global option --shallow-file to pass on the alternate
shallow file path. Undocumented (and not even support --shallow-file=
syntax) because it's unlikely to be used again elsewhere.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when no (valid) upstream is configured for a branch, you get
an error like:
$ git show @{u}
error: No upstream configured for branch 'upstream-error'
error: No upstream configured for branch 'upstream-error'
fatal: ambiguous argument '@{u}': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
The "error: " line actually appears twice, and the rest of the error
message is useless. In sha1_name.c:interpret_branch_name(), there is
really no point in processing further if @{u} couldn't be resolved, and
we might as well die() instead of returning an error(). After making
this change, you get:
$ git show @{u}
fatal: No upstream configured for branch 'upstream-error'
Also tweak a few tests in t1507 to expect this output.
This only turns error() that may be called after we know we are
dealing with an @{upstream} marker into die(), without touching
silent error returns "return -1" from the function. Any caller that
wants to handle an error condition itself will not be hurt by this
change, unless they want to see the message from error() and then
exit silently without giving its own message, which needs to be
fixed anyway.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a file with a long name to the test archive in order to check
entries with pax extended headers. Also add a check for tar versions
that doen't understand this format. Those versions should extract the
headers as a regular files. Add code to check_tar() to interpret the
path header if present, so that our tests work even with those tar
versions.
It's important to use the fallback code only if needed to still be
able to detect git archive errorously creating pax headers as regular
file entries (with a suitable tar version, of course).
The archive used to check for pax header support in tar was generated
using GNU tar 1.26 and its option --format=pax.
Tested successfully on NetBSD 6.1, which has a tar version lacking pax
header support.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just compare the archives created by git tar-tree with the ones created
using git archive with the equivalent options, whose contents are
checked already, instead of extracting them again.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perform the full range of checks against all archived files instead of
looking only at the file type of a few of them. Also add a test of a
git archive with a prefix ending in with a slash, i.e. adding a full
directory level.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a helper function that extracts a tar archive and checks its
contents, modelled after check_zip in t5003.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create the directories b and c just before they are needed instead of
up front. For t5003 it turns out we don't need them at all. For t5000
it makes the coming modifications easier.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of creating extra archives for testing substitutions, set the
attribute export-subst and overwrite the marked file with the expected
(expanded) content right between committing and archiving. Thus
placeholder expansion based on the committed content is performed with
each archive creation and the comparison with the contents of directory
a yields the correct result. We can then remove the special tests for
export-subst.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This parameter is equivalent to the parameter --parents on svn cp commands
and is useful for non-standard repository layouts.
Signed-off-by: Tobias Schulte <tobias.schulte@gliderpilot.de>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Commit 02c5631 (difftool --dir-diff: symlink all files matching the
working tree, 2013-03-14) does not handle the case where a file that is
being compared does not exist in the working tree. Fix this by checking
for existence explicitly before running git-hash-object.
Reported-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you were on 'frotz' branch before you checked out your current
branch, "git merge @{-1}~22" means the same as "git merge frotz~22".
The strbuf_branchname() function, when interpret_branch_name() gives
up resolving "@{-1}~22" fully, returns "frotz" and tells the caller
that it only resolved "@{-1}" part of the input, mistakes this as a
total failure, and appends the whole thing to the result, yielding
"frotz@{-1}~22", which does not make any sense.
Inspect the return value from interpret_branch_name() a bit more
carefully. When it errored out without consuming anything, we will
get -1 and we should return the whole thing. Otherwise, we should
append the remainder (i.e. "~22" in the earlier example) to the
partially resolved name (i.e. "frotz").
The test suite adds enough number of checkout to make @{-12} in the
last test in t0100 that tried to check "we haven't flipped branches
that many times" error case succeed; raise the number to a hundred.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation assures users that "A...B" is defined as "A B --not
$(git merge-base --all A B)". This wasn't in fact quite true, because
the calculated merge bases were not sent to add_rev_cmdline().
The main effect of this was that although
git rev-list --ancestry-path A B --not $(git merge-base --all A B)
worked, the simpler form
git rev-list --ancestry-path A...B
failed with a "no bottom commits" error.
Other potential users of bottom commits could also be affected by this
problem, if they examine revs->cmdline_info; I came across the issue in
my proposed history traversal refinements series.
So ensure that the calculated merge bases are sent to add_rev_cmdline(),
flagged with new 'whence' enum value REV_CMD_MERGE_BASE.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a deletion is followed by exactly 3 (or whatever the number of
context lines) unchanged lines, followed by another change, the combined
diff output would hide the first deletion, resulting in a malformed
diff.
This happened because the 3 lines before each change are painted
interesting, but also marked as no_pre_delete to prevent showing deletes
that were previously marked as uninteresting. This behaviour was
introduced in c86fbe53 (diff -c/--cc: do not include uninteresting
deletion before leading context). However, as a side effect, this could
also mark deletes that were already interesting as no_pre_delete. This
would happen only if the delete was exactly 3 lines away from the next
change, since lines farther away would not be touched by the "paint
three lines before the change" code and lines closer would be painted
by the "merge two adjacent hunks" code instead, which does not set the
no_pre_delete flag.
This commit fixes this problem by only setting the no_pre_delete flag
for changes that were previously uninteresting.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The set-up step to prepare a repository with 50000 tags used a
non-porable '\+' to match one-or-more.
The error was not caught because the next test that uses that
repository did not even bother to check if these expected tags were
actually cloned to the resulting repository.
Fix the sed construct to use BRE and update the "clone" test that
wanted to test cloning from such a repository with many refs to
check the resulting repository.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Git 1.8.2.3
t5004: avoid using tar for checking emptiness of archive
t5004: ignore pax global header file
mergetools/kdiff3: do not use --auto when diffing
transport-helper: trivial style cleanup
Test 2 of t5004 checks if a supposedly empty tar archive really
contains no files. 24676f02 (t5004: fix issue with empty archive test
and bsdtar) removed our commit hash to make it work with bsdtar, but
the test still fails on NetBSD and OpenBSD, which use their own tar
that considers a tar file containing only NULs as broken.
Here's what the different archivers do when asked to create a tar
file without entries:
$ uname -v
NetBSD 6.0.1 (GENERIC)
$ gtar --version | head -1
tar (GNU tar) 1.26
$ bsdtar --version
bsdtar 2.8.4 - libarchive 2.8.4
$ : >zero.tar
$ perl -e 'print "\0" x 10240' >tenk.tar
$ sha1 zero.tar tenk.tar
SHA1 (zero.tar) = da39a3ee5e6b4b0d3255bfef95601890afd80709
SHA1 (tenk.tar) = 34e163be8e43c5631d8b92e9c43ab0bf0fa62b9c
$ : | tar cf - -T - | sha1
da39a3ee5e6b4b0d3255bfef95601890afd80709
$ : | gtar cf - -T - | sha1
34e163be8e43c5631d8b92e9c43ab0bf0fa62b9c
$ : | bsdtar cf - -T - | sha1
34e163be8e43c5631d8b92e9c43ab0bf0fa62b9c
So NetBSD's native tar creates an empty file, while GNU tar and bsdtar
both give us 10KB of NULs -- just like git archive with an empty tree.
Now let's see how the archivers handle these two kinds of empty tar
files:
$ tar tf zero.tar; echo $?
tar: Unexpected EOF on archive file
1
$ gtar tf zero.tar; echo $?
gtar: This does not look like a tar archive
gtar: Exiting with failure status due to previous errors
2
$ bsdtar tf zero.tar; echo $?
0
$ tar tf tenk.tar; echo $?
tar: Cannot identify format. Searching...
tar: End of archive volume 1 reached
tar: Sorry, unable to determine archive format.
1
$ gtar tf tenk.tar; echo $?
0
$ bsdtar tf tenk.tar; echo $?
0
NetBSD's tar complains about both, bsdtar happily accepts any of them
and GNU tar doesn't like zero-length archive files. So the safest
course of action is to stay with our block-of-NULs format which is
compatible with GNU tar and bsdtar, as we can't make NetBSD's native
tar happy anyway.
We can simplify our test, however, by taking tar out of the picture.
Instead of extracting the archive and checking for the non-presence of
files, check if the file has a size of 10KB and contains only NULs.
This makes t5004 pass on NetBSD and OpenBSD.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test to verify the emptiness of an archive by extracting its
contents. Don't run this test if the version of tar doesn't support
archives containing only a comment header, though.
The existing check 'tar archive of empty tree is empty' used to work
like that (minus the tar capability check) but was changed to depend
on the exact representation of empty tar files created by git archive
instead of on the behaviour of tar in order to avoid issues with
different tar versions.
The different approaches test different things: The existing one is
for empty trees, for which we know the exact expected output and thus
we can simply check it without extracting; the new one is for commits
with empty trees, whose archives include stamps and so the more
"natural" check by extraction is a better fit because it focuses on
the interesting aspect, namely the absence of any archive entries.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test 2 of t5004 checks if a supposedly empty tar archive really
contains no files. 24676f02 (t5004: fix issue with empty archive test
and bsdtar) removed our commit hash to make it work with bsdtar, but
the test still fails on NetBSD and OpenBSD, which use their own tar
that considers a tar file containing only NULs as broken.
Here's what the different archivers do when asked to create a tar
file without entries:
$ uname -v
NetBSD 6.0.1 (GENERIC)
$ gtar --version | head -1
tar (GNU tar) 1.26
$ bsdtar --version
bsdtar 2.8.4 - libarchive 2.8.4
$ : >zero.tar
$ perl -e 'print "\0" x 10240' >tenk.tar
$ sha1 zero.tar tenk.tar
SHA1 (zero.tar) = da39a3ee5e6b4b0d3255bfef95601890afd80709
SHA1 (tenk.tar) = 34e163be8e43c5631d8b92e9c43ab0bf0fa62b9c
$ : | tar cf - -T - | sha1
da39a3ee5e6b4b0d3255bfef95601890afd80709
$ : | gtar cf - -T - | sha1
34e163be8e43c5631d8b92e9c43ab0bf0fa62b9c
$ : | bsdtar cf - -T - | sha1
34e163be8e43c5631d8b92e9c43ab0bf0fa62b9c
So NetBSD's native tar creates an empty file, while GNU tar and bsdtar
both give us 10KB of NULs -- just like git archive with an empty tree.
Now let's see how the archivers handle these two kinds of empty tar
files:
$ tar tf zero.tar; echo $?
tar: Unexpected EOF on archive file
1
$ gtar tf zero.tar; echo $?
gtar: This does not look like a tar archive
gtar: Exiting with failure status due to previous errors
2
$ bsdtar tf zero.tar; echo $?
0
$ tar tf tenk.tar; echo $?
tar: Cannot identify format. Searching...
tar: End of archive volume 1 reached
tar: Sorry, unable to determine archive format.
$ gtar tf tenk.tar; echo $?
0
$ bsdtar tf tenk.tar; echo $?
0
NetBSD's tar complains about both, bsdtar happily accepts any of them
and GNU tar doesn't like zero-length archive files. So the safest
course of action is to stay with our block-of-NULs format which is
compatible with GNU tar and bsdtar, as we can't make NetBSD's native
tar happy anyway.
We can simplify our test, however, by taking tar out of the picture.
Instead of extracting the archive and checking for the non-presence of
files, check if the file has a size of 10KB and contains only NULs.
This makes t5004 pass on NetBSD and OpenBSD.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Versions of tar that don't know pax headers -- like the ones in NetBSD 6
and OpenBSD 5.2 -- extract them as regular files. Explicitly ignore the
file created for our global header when checking the list of extracted
files, as this is normal and harmless fall-back behaviour. This fixes
test 3 of t5004 on these platforms.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SVN::Fetcher module is now able to filter for inclusion as well
as exclusion (as used by --ignore-path). Also added tests, documentation
changes and git completion script.
If you have an SVN repository with many top level directories and you
only want a git-svn clone of some of them then using --ignore-path is
difficult as it requires a very long regexp. In this case it's much
easier to filter for inclusion.
[ew: remove trailing whitespace]
Signed-off-by: Paul Walmsley <pjwhams@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
When svn.pushmergeinfo is set, the target branch is included in the
mergeinfo if it was previously merged into one of the source branches.
SVN does not do this.
Remove merge target branch path from resulting mergeinfo when
svn.pushmergeinfo is set to better match the behavior of SVN. Update the
svn-mergeinfo-push test.
[ew: 80 columns]
Signed-off-by: Michael Contreras <michael@inetric.com>
Reported-by: Avishay Lavie <avishay.lavie@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
git-merge-tree causes a null pointer dereference when a directory
entry exists in only one or two of the three trees being compared with
no corresponding entry in the other tree(s).
When this happens, we want to handle the entry as a directory and not
attempt to mark it as a file merge. Do this by setting the entries bit
in the directory mask when the entry is missing or when it is a
directory, only performing the file comparison when we know that a file
entry exists.
Reported-by: Andreas Jacobsen <andreas@andreasjacobsen.com>
Signed-off-by: John Keeping <john@keeping.me.uk>
Tested-by: Andreas Jacobsen <andreas@andreasjacobsen.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there's already a remote-helper tracking ref, we can fetch the
SHA-1 to report proper push messages (as opposed to always reporting
[new branch]).
The remote-helper currently can specify the old SHA-1 to avoid this
problem, but there's no point in forcing all remote-helpers to be aware
of git commit ids; they should be able to be agnostic of them.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/remote-tighten-commandline-parsing:
remote: 'show' and 'prune' can take more than one remote
remote: check for superfluous arguments in 'git remote add'
remote: add a test for extra arguments, according to docs
When the client sends a 'shallow' line for an object that the server does
not have, the server should just ignore it and let the client keep that
unknown shallow boundary.
Signed-off-by: Michael Heemskerk <mheemskerk@atlassian.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/remote-tighten-commandline-parsing:
remote: 'show' and 'prune' can take more than one remote
remote: check for superfluous arguments in 'git remote add'
remote: add a test for extra arguments, according to docs
Commit d24fbca (Remove Git's support for smoke testing - 2011-12-23)
removed the smoke test support from the test suite but it was
re-added by commit 342e9ef (Introduce a performance testing
framework - 2012-02-17). This appears to be the result of a
mis-rebase, since re-adding the smoke testing infrastructure does
not relate to the subject of that commit.
The current 'smoke' target is broken since the 'harness' script it
uses no longer exists, so just reapply this section of commit d24fbca
and remove all of the smoke testing section in the makefile.
Signed-off-by: John Keeping <john@keeping.me.uk>
Acked-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit aacecc3 (merge-tree: don't print entries that match "local" -
2013-04-07) had a typo causing the "same in both" check to be incorrect
and check if both the base and "their" versions are removed instead of
checking that both the "our" and "their" versions are removed. Fix
this.
Reported-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Test-written-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rt/commentchar-fmt-merge-msg:
t6200: avoid path mangling issue on Windows
fmt-merge-msg: use core.commentchar in tag signatures completely
fmt-merge-msg: respect core.commentchar in people credits
The shell syntax "export X=Y A=B" is not understood by all shells.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell syntax "export X=Y" is not understood by all shells.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell syntax "export X=Y" is not understood by all shells.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a rebase stops (e.g. interrupted by a merge conflict), it could
be useful to know how far a rebase has progressed and how many
commits in total this rebase will apply. Teach the __git_ps1()
command to display the number of commits so far applied and the
total number of commits to be applied, like this:
((3ec0a6a...)|REBASE 2/5)
In the example above the rebase has stopped at the second commit due to
a merge conflict and there are a total number of five commits to be
applied by this rebase.
This information can be already obtained from the following files which are
being generated during the rebase:
GIT_DIR/.git/rebase-merge/msgnum (git-rebase--merge.sh)
GIT_DIR/.git/rebase-merge/end (git-rebase--merge.sh)
GIT_DIR/.git/rebase-apply/next (git-am.sh)
GIT_DIR/.git/rebase-apply/last (git-am.sh)
but "rebase -i" does not leave necessary clues.
Implement this feature by doing these three things:
1) Modify git-rebase--interactive.sh to also create
GIT_DIR/.git/rebase-merge/msgnum
GIT_DIR/.git/rebase-merge/end
files for the number of commits so far applied and the total
number of commits to be applied.
2) Modify git-prompt.sh to read and display info from the above
files.
3) Update test t9903-bash-prompt.sh to reflect changes introduced
by this patch.
Signed-off-by: Zoltan Klinger <zoltan.klinger@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows remote-helpers to declare they can handle signed tags, and
issue a warning when using those that don't.
* jk/remote-helper-with-signed-tags:
transport-helper: add 'signed-tags' capability
transport-helper: pass --signed-tags=warn-strip to fast-export
fast-export: add --signed-tags=warn-strip mode
"git log -S/-G" started paying attention to textconv filter, but
there was no way to disable this. Make it honor --no-textconv
option.
* sr/log-SG-no-textconv:
diffcore-pickaxe: unify code for log -S/-G
diffcore-pickaxe: fix leaks in "log -S<block>" and "log -G<pattern>"
diffcore-pickaxe: port optimization from has_changes() to diff_grep()
diffcore-pickaxe: respect --no-textconv
diffcore-pickaxe: remove fill_one()
diffcore-pickaxe: remove unnecessary call to get_textconv()
"git merge $(git rev-parse v1.8.2)" behaved quite differently from
"git merge v1.8.2", as if v1.8.2 were written as v1.8.2^0 and did
not pay much attention to the annotated tag payload. Make the code
notice the type of the tag object, in addition to the dwim_ref()
based classification the current code uses (i.e. the name appears in
refs/tags/) to decide when to special case merging of tags.
* jc/merge-tag-object:
t6200: test message for merging of an annotated tag
t6200: use test_config/test_unconfig
merge: a random object may not necssarily be a commit
The 'git remote show' and 'prune' subcommands are documented as taking
only a single remote name argument, but that is not the case; they
will simply iterate the action over all remotes given. Update the
documentation and tests to match.
With the last user of the -f flag gone, we also remove the code
supporting it.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git remote add' subcommand did not check for superfluous command
line arguments. Make it so.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds one test or comment for each subcommand of git-remote
according to its current documentation. All but 'set-branches' and
'update' are listed as taking only a fixed number of arguments; for
those we can write a test with one more (bogus) argument, and see if
the command notices that.
They fail on several counts: 'add' does not check for extra arguments,
and 'show' and 'prune' actually iterate over remotes (i.e., take any
number of args). We'll fix them in the next two patches.
The -f machinery is only there to make the tests readable while still
ensuring they pass as a whole, and will be removed in the final patch.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we 'git rebase $upstream', git uses 'rev-parse --verify
$current_branch' to find ORIG_HEAD. But if $current_branch
is ambiguous, 'rev-parse --verify' emits a warning and returns
a SHA1 anyway. When the wrong ambiguous choice is used,
git-rebase fails non-gracefully: it emits a warning about
failing to lock $current_branch, an error about being unable to
checkout $current_branch again, and it might even decide the
rebase is a fast-forward when it is not.
In the 'rebase $upstream' case, we already know the unambiguous
spelling of $current_branch is "HEAD". Fix git-rebase to find
$orig_head unambiguously.
Add a test in t3400-rebase.sh which creates an ambiguous branch
name and rebases it implicitly with 'git rebase $other'.
Signed-off-by: Phil Hord <hordp@cisco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pretty-printing body of the commit that is stored in non UTF-8
encoding did not work well. The early part of this series fixes
it. And then it adds %C(auto) specifier that turns the coloring on
when we are emitting to the terminal, and adds column-aligning
format directives.
* nd/pretty-formats:
pretty: support %>> that steal trailing spaces
pretty: support truncating in %>, %< and %><
pretty: support padding placeholders, %< %> and %><
pretty: add %C(auto) for auto-coloring
pretty: split color parsing into a separate function
pretty: two phase conversion for non utf-8 commits
utf8.c: add reencode_string_len() that can handle NULs in string
utf8.c: add utf8_strnwidth() with the ability to skip ansi sequences
utf8.c: move display_mode_esc_sequence_len() for use by other functions
pretty: share code between format_decoration and show_decorations
pretty-formats.txt: wrap long lines
pretty: get the correct encoding for --pretty:format=%e
pretty: save commit encoding from logmsg_reencode if the caller needs it
Fixes a handful of issues in the code to traverse working tree to
find untracked and/or ignored files, cleans up and optimizes the
codepath in general.
* kb/status-ignored-optim-2:
dir.c: git-status --ignored: don't scan the work tree twice
dir.c: git-status --ignored: don't scan the work tree three times
dir.c: git-status: avoid is_excluded checks for tracked files
dir.c: replace is_path_excluded with now equivalent is_excluded API
dir.c: unify is_excluded and is_path_excluded APIs
dir.c: move prep_exclude
dir.c: factor out parts of last_exclude_matching for later reuse
dir.c: git-clean -d -X: don't delete tracked directories
dir.c: make 'git-status --ignored' work within leading directories
dir.c: git-status --ignored: don't list empty directories as ignored
dir.c: git-ls-files --directories: don't hide empty directories
dir.c: git-status --ignored: don't list empty ignored directories
dir.c: git-status --ignored: don't list files in ignored directories
dir.c: git-status --ignored: don't drop ignored directories
If the bisection completes with only skipped commits left to as possible
first bad commit, output the list of possible first bad commits to human
readers of the bisection log.
Signed-off-by: Torstein Hegge <hegge@resisty.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve documentation to illustrate "push authenticated, fetch
anonymous" configuration for smart HTTP servers.
* jk/doc-http-backend:
doc/http-backend: match query-string in apache half-auth example
doc/http-backend: give some lighttpd config examples
doc/http-backend: clarify "half-auth" repo configuration
"git clone" did not work if a repository pointed at by the
"--reference" option is a gitfile that points at another place.
* as/clone-reference-with-gitfile:
clone: Allow repo using gitfile as a reference
clone: Fix error message for reference repository
Preparatory steps to make "git add <pathspec>" take notice of
removed paths that match <pathspec> by default in Git 2.0.
* 'jc/add-2.0-delete-default' (early part):
git add: rephrase the "removal will cease to be ignored" warning
git add: rework the logic to warn "git add <pathspec>..." default change
git add: start preparing for "git add <pathspec>..." to default to "-A"
builtin/add.c: simplify boolean variables
Make the initial "sparse" selection of the paths more sticky across
"git checkout".
* nd/checkout-keep-sparse:
checkout: add --ignore-skip-worktree-bits in sparse checkout mode
A commit object whose author or committer ident are malformed
crashed some code that trusted that a name, an email and an
timestamp can always be found in it.
* jk/chopped-ident:
blame: handle broken commit headers gracefully
pretty: handle broken commit headers gracefully
cat-file: print tags raw for "cat-file -p"
Improve documentation to illustrate "push authenticated, fetch
anonymous" configuration for smart HTTP servers.
* jk/doc-http-backend:
doc/http-backend: match query-string in apache half-auth example
doc/http-backend: give some lighttpd config examples
doc/http-backend: clarify "half-auth" repo configuration
The current code for validating tracking branches (e.g. the argument to
the -t/--track option) hardcodes refs/heads/* and refs/remotes/* as the
potential locations for tracking branches. This works with the refspecs
created by "git clone" or "git remote add", but is suboptimal in other
cases:
- If "refs/remotes/foo/bar" exists without any association to a remote
(i.e. there is no remote named "foo", or no remote with a refspec
that matches "refs/remotes/foo/bar"), then it is impossible to set up
a valid upstream config that tracks it. Currently, the code defaults
to using "refs/remotes/foo/bar" from repo "." as the upstream, which
works, but is probably not what the user had in mind when running
"git branch baz --track foo/bar".
- If the user has tweaked the fetch refspec for a remote to put its
remote-tracking branches outside of refs/remotes/*, e.g. by running
git config remote.foo.fetch "+refs/heads/*:refs/foo_stuff/*"
then the current code will refuse to use its remote-tracking branches
as --track arguments, since they do not match refs/remotes/*.
This patch removes the "refs/remotes/*" requirement for upstream branches,
and replaces it with explicit checking of the refspecs for each remote to
determine whether a given --track argument is a valid remote-tracking
branch. This solves both of the above problems, since the matching refspec
guarantees that there is a both a remote name and a remote branch name
that can be used for the upstream config.
However, this means that refs located within refs/remotes/* without a
corresponding remote/refspec will no longer be usable as upstreams.
The few existing tests which depended on this behavioral quirk has
already been fixed in the preceding patches.
This patch fixes the last remaining test failure in t2024-checkout-dwim.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are formalizing a requirement that any remote-tracking branch to be used
as an upstream (i.e. as an argument to --track), _must_ "belong" to a
configured remote by being matched by the "dst" side of a fetch refspec.
This test uses --track against a "remotes/trunk" ref which does not belong
to any configured (git) remotes, but is instead created by "git svn fetch"
operating on an svn-remote. It does not make sense to use an svn-remote as
an upstream for a local branch, as a regular "git pull" from (or "git push"
to) it would obviously fail (instead you would need to use "git svn" to
communicate with this remote). Furthermore, the usage of --track in this
case is unnecessary, since the upstreaming config that would be created is
never used.
Simply removing --track fixes the issue without changing the expected
behavior of the test.
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are formalizing a requirement that any remote-tracking branch to be used
as an upstream (i.e. as an argument to --track), _must_ "belong" to a
configured remote by being matched by the "dst" side of a fetch refspec.
Without this patch, this test would start failing when the new behavior is
introduced.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are formalizing a requirement that any remote-tracking branch to be used
as an upstream (i.e. as an argument to --track), _must_ "belong" to a
configured remote by being matched by the "dst" side of a fetch refspec.
This patch encodes the new expected behavior of this test, and marks the
test with "test_expect_failure" in anticipation of a following patch to
introduce the new behavior.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The DWIM mode of checkout allows you to run "git checkout foo" when there
is no existing local ref or path called "foo", and there is exactly _one_
remote with a remote-tracking branch called "foo". Git will automatically
create a new local branch called "foo" using the remote-tracking "foo" as
its starting point and configured upstream.
For example, consider the following unconventional (but perfectly valid)
remote setup:
[remote "origin"]
fetch = refs/heads/*:refs/remotes/origin/*
[remote "frotz"]
fetch = refs/heads/*:refs/remotes/frotz/nitfol/*
Case 1: Assume both "origin" and "frotz" have remote-tracking branches called
"foo", at "refs/remotes/origin/foo" and "refs/remotes/frotz/nitfol/foo"
respectively. In this case "git checkout foo" should fail, because there is
more than one remote with a "foo" branch.
Case 2: Assume only "frotz" have a remote-tracking branch called "foo". In
this case "git checkout foo" should succeed, and create a local branch "foo"
from "refs/remotes/frotz/nitfol/foo", using remote branch "foo" from "frotz"
as its upstream.
The current code hardcodes the assumption that all remote-tracking branches
must match the "refs/remotes/$remote/*" pattern (which is true for remotes
with "conventional" refspecs, but not true for the "frotz" remote above).
When running "git checkout foo", the current code looks for exactly one ref
matching "refs/remotes/*/foo", hence in the above example, it fails to find
"refs/remotes/frotz/nitfol/foo", which causes it to fail both case #1 and #2.
The better way to handle the above example is to actually study the fetch
refspecs to deduce the candidate remote-tracking branches for "foo"; i.e.
assume "foo" is a remote branch being fetched, and then map "refs/heads/foo"
through the refspecs in order to get the corresponding remote-tracking
branches "refs/remotes/origin/foo" and "refs/remotes/frotz/nitfol/foo".
Finally we check which of these happens to exist in the local repo, and
if there is exactly one, we have an unambiguous match for "git checkout foo",
and may proceed.
This fixes most of the failing tests introduced in the previous patch.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using "git checkout foo" to DWIM the creation of local "foo" from some
existing upstream "foo", we assume conventional refspecs as created by "git
clone" or "git remote add", and fail to work correctly if the current
refspecs do not follow the conventional "refs/remotes/$remote/*" pattern.
Improved-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The DWIM mode of checkout allows you to run "git checkout foo" when there is
no existing local ref or path called "foo", and there is exactly one remote
with a remote-tracking branch called "foo". Git will then automatically
create a new local branch called "foo" using the remote-tracking "foo" as
its starting point and configured upstream.
Improved-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
