There is currently no easy way to ask the revision traversal
machinery to include objects reachable from the index (e.g.,
blobs and trees that have not yet been committed). This
patch adds an option to do so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we call traverse_commit_list, we may have trees and
blobs in the pending array. As we process these, we pass the
"name" field from the pending entry as the path of the
object within the tree (which then becomes the root path if
we recurse into subtrees).
When we set up the traversal in prepare_revision_walk,
though, the "name" field of any pending trees and blobs is
likely to be the ref at which we found the object. We would
not want to make this part of the path (e.g., doing so would
make "git rev-list --objects v2.6.11-tree" in linux.git show
paths like "v2.6.11-tree/Makefile", which is nonsensical).
Therefore prepare_revision_walk sets the name field of each
pending tree and blobs to the empty string.
However, this leaves no room for a caller who does know the
correct path of a pending object to propagate that
information to the revision walker. We can fix this by
making two related changes:
1. Use the "path" field as the path instead of the "name"
field in traverse_commit_list. If the path is not set,
default to "" (which is what we always ended up with in
the current code, because of prepare_revision_walk).
2. In prepare_revision_walk, make a complete copy of the
entry. This makes the path field available to the
walker (if there is one), solving our problem.
Leaving the name field intact is now OK, as we do not
use it as a path due to point (1) above (and we can use
it to make more meaningful error messages if we want).
We also make the original "mode" field available to the
walker, though it does not actually use it.
Note that we still re-add the pending objects and free the
old ones (so we may strdup the path and name only to free
the old ones). This could be made more efficient by simply
copying the object_array entries that we are keeping.
However, that would require more restructuring of the code,
and is not done here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to add all reflog entries as tips for finding
reachable objects. The revision machinery can already do
this (to support "rev-list --reflog"); we can reuse that
code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we enter prepare_revision_walk, we have zero or more
entries in our "pending" array. We disconnect that array
from the rev_info, and then process each entry:
1. If the entry is a commit and the --source option is in
effect, we keep a pointer to the object name.
2. Otherwise, we re-add the item to the pending list with
a blank name.
We then throw away the old array by freeing the array
itself, but do not touch the "name" field of each entry. For
any items of type (2), we leak the memory associated with
the name. This commit fixes that by calling object_array_clear,
which handles the cleanup for us.
That breaks (1), though, because it depends on the memory
pointed to by the name to last forever. We can solve that by
making a copy of the name. This is slightly less efficient,
but it shouldn't matter in practice, as we do it only for
the tip commits of the traversal.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The API to allocate the structure to keep track of commit
decoration was cumbersome to use, inviting lazy code to
overallocate memory.
* jk/name-decoration-alloc:
log-tree: use FLEX_ARRAY in name_decoration
log-tree: make name_decoration hash static
log-tree: make add_name_decoration a public function
In the previous commit, we made add_name_decoration global
so that adders would not have to access the hash directly.
We now make the hash itself static so that callers _have_ to
add through our function, making sure that all additions go
through a single point. To do this, we have to add one more
accessor function: a way to lookup entries in the hash.
Since the only caller doesn't actually look at the returned
value, but rather only asks whether there is a decoration or
not, we could provide only a boolean "has_name_decoration".
That would allow us to make "struct name_decoration" local
to log-tree, as well.
However, it's unlikely to cause any maintainability harm
making the actual data public, and this interface is more
flexible if we need to look at decorations from other parts
of the code in the future.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, we parsed pretty options by looking for
"--pretty" at the start of the string, and then feeding the
rest (including an "=") to get_commit_format. Later, commit
48ded91 (log --pretty: do not accept bogus "--prettyshort",
2008-05-25) split this into a separate check for "--pretty"
versus "--pretty=".
However, when parsing "--pretty", we still passed "arg+8" to
get_commit_format. This is useless, since it will always
point to the NUL terminator at the end of the string. We can
simply pass NULL instead; both parameters are treated the
same by get_commit_format.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A handful of code paths had to read the commit object more than
once when showing header fields that are usually not parsed. The
internal data structure to keep track of the contents of the commit
object has been updated to reduce the need for this double-reading,
and to allow the caller find the length of the object.
* jk/commit-buffer-length:
reuse cached commit buffer when parsing signatures
commit: record buffer length in cache
commit: convert commit->buffer to a slab
commit-slab: provide a static initializer
use get_commit_buffer everywhere
convert logmsg_reencode to get_commit_buffer
use get_commit_buffer to avoid duplicate code
use get_cached_commit_buffer where appropriate
provide helpers to access the commit buffer
provide a helper to set the commit buffer
provide a helper to free commit buffer
sequencer: use logmsg_reencode in get_message
logmsg_reencode: return const buffer
do not create "struct commit" with xcalloc
commit: push commit_index update into alloc_commit_node
alloc: include any-object allocations in alloc_report
replace dangerous uses of strbuf_attach
commit_tree: take a pointer/len pair rather than a const strbuf
Move "commit->buffer" out of the in-core commit object and keep
track of their lengths. Use this to optimize the code paths to
validate GPG signatures in commit objects.
* jk/commit-buffer-length:
reuse cached commit buffer when parsing signatures
commit: record buffer length in cache
commit: convert commit->buffer to a slab
commit-slab: provide a static initializer
use get_commit_buffer everywhere
convert logmsg_reencode to get_commit_buffer
use get_commit_buffer to avoid duplicate code
use get_cached_commit_buffer where appropriate
provide helpers to access the commit buffer
provide a helper to set the commit buffer
provide a helper to free commit buffer
sequencer: use logmsg_reencode in get_message
logmsg_reencode: return const buffer
do not create "struct commit" with xcalloc
commit: push commit_index update into alloc_commit_node
alloc: include any-object allocations in alloc_report
replace dangerous uses of strbuf_attach
commit_tree: take a pointer/len pair rather than a const strbuf
"git log --exclude=<glob> --all | git shortlog" worked as expected,
but "git shortlog --exclude=<glob> --all", which is supposed to be
identical to the above pipeline, was not accepted at the command
line argument parser level.
* jc/shortlog-ref-exclude:
shortlog: allow --exclude=<glob> to be passed
"git log -2master" is a common typo that shows two commits starting
from whichever random branch that is not 'master' that happens to
be checked out currently.
* jc/revision-dash-count-parsing:
revision: parse "git log -<count>" more carefully
"git log -2master" is a common typo that shows two commits starting
from whichever random branch that is not 'master' that happens to
be checked out currently.
* jc/revision-dash-count-parsing:
revision: parse "git log -<count>" more carefully
Like the callsites in the previous commit, logmsg_reencode
already falls back to read_sha1_file when necessary.
However, I split its conversion out into its own commit
because it's a bit more complex.
We return either:
1. The original commit->buffer
2. A newly allocated buffer from read_sha1_file
3. A reencoded buffer (based on either 1 or 2 above).
while trying to do as few extra reads/allocations as
possible. Callers currently free the result with
logmsg_free, but we can simplify this by pointing them
straight to unuse_commit_buffer. This is a slight layering
violation, in that we may be passing a buffer from (3).
However, since the end result is to free() anything except
(1), which is unlikely to change, and because this makes the
interface much simpler, it's a reasonable bending of the
rules.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return value from logmsg_reencode may be either a newly
allocated buffer or a pointer to the existing commit->buffer.
We would not want the caller to accidentally free() or
modify the latter, so let's mark it as const. We can cast
away the constness in logmsg_free, but only once we have
determined that it is a free-able buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mistyped command line simply ignores "master" and ends up
showing two commits from the current HEAD:
$ git log -2master
because we feed "2master" to atoi() without making sure that the
whole string is parsed as an integer.
Use the strtol_i() helper function instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"log --exclude=<glob> --all | shortlog" worked as expected, but
"shortlog --exclude=<glob> --all" was not accepted at the command
line argument parser level.
* jc/shortlog-ref-exclude:
shortlog: allow --exclude=<glob> to be passed
These two commands are supposed to be equivalent:
$ git log --exclude=refs/notes/\* --all --no-merges --since=2.days |
git shortlog
$ git shortlog --exclude=refs/notes/\* --all --no-merges --since=2.days
However, the latter does not understand the ref-exclusion command
line option, even though other options understood by "log", such as
"--all" and "--no-merges", are understood.
This was because e7b432c5 (revision: introduce --exclude=<glob> to
tame wildcards, 2013-08-30) did not wire the new option fully to the
machinery. A new option understood by handle_revision_pseudo_opt()
must be told to handle_revision_opt() as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pack-objects is computing the reachability bitmap to
serve a fetch request, it can erroneously die() if some of
the UNINTERESTING objects are not present. Upload-pack
throws away HAVE lines from the client for objects we do not
have, but we may have a tip object without all of its
ancestors (e.g., if the tip is no longer reachable and was
new enough to survive a `git prune`, but some of its
reachable objects did get pruned).
In the non-bitmap case, we do a revision walk with the HAVE
objects marked as UNINTERESTING. The revision walker
explicitly ignores errors in accessing UNINTERESTING commits
to handle this case (and we do not bother looking at
UNINTERESTING trees or blobs at all).
When we have bitmaps, however, the process is quite
different. The bitmap index for a pack-objects run is
calculated in two separate steps:
First, we perform an extensive walk from all the HAVEs to
find the full set of objects reachable from them. This walk
is usually optimized away because we are expected to hit an
object with a bitmap during the traversal, which allows us
to terminate early.
Secondly, we perform an extensive walk from all the WANTs,
which usually also terminates early because we hit a commit
with an existing bitmap.
Once we have the resulting bitmaps from the two walks, we
AND-NOT them together to obtain the resulting set of objects
we need to pack.
When we are walking the HAVE objects, the revision walker
does not know that we are walking it only to mark the
results as uninteresting. We strip out the UNINTERESTING flag,
because those objects _are_ interesting to us during the
first walk. We want to keep going to get a complete set of
reachable objects if we can.
We need some way to tell the revision walker that it's OK to
silently truncate the HAVE walk, just like it does for the
UNINTERESTING case. This patch introduces a new
`ignore_missing_links` flag to the `rev_info` struct, which
we set only for the HAVE walk.
It also adds tests to cover UNINTERESTING objects missing
from several positions: a missing blob, a missing tree, and
a missing parent commit. The missing blob already worked (as
we do not care about its contents at all), but the other two
cases caused us to die().
Note that there are a few cases we do not need to test:
1. We do not need to test a missing tree, with the blob
still present. Without the tree that refers to it, we
would not know that the blob is relevant to our walk.
2. We do not need to test a tip commit that is missing.
Upload-pack omits these for us (and in fact, we
complain even in the non-bitmap case if it fails to do
so).
Reported-by: Siddharth Agarwal <sid0@fb.com>
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Attempts to show where a single-strand-of-pearls break in "git log"
output.
* nd/log-show-linear-break:
log: add --show-linear-break to help see non-linear history
object.h: centralize object flag allocation
Option explanation is in rev-list-options.txt. The interaction with -z
is left undecided.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/warn-on-object-refname-ambiguity:
rev-list: disable object/refname ambiguity check with --stdin
cat-file: restore warn_on_object_refname_ambiguity flag
cat-file: fix a minor memory leak in batch_objects
cat-file: refactor error handling of batch_objects
We started using wildmatch() in place of fnmatch(3); complete the
process and stop using fnmatch(3).
* nd/no-more-fnmatch:
actually remove compat fnmatch source code
stop using fnmatch (either native or compat)
Revert "test-wildmatch: add "perf" command to compare wildmatch and fnmatch"
use wildmatch() directly without fnmatch() wrapper
This is the "rev-list" analogue to 25fba78 (cat-file:
disable object/refname ambiguity check for batch mode,
2013-07-12). Like cat-file, "rev-list --stdin" may read a
large number of sha1 object names, and the warning check
introduces a significant slow-down.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Borrow the bitmap index into packfiles from JGit to speed up
enumeration of objects involved in a commit range without having to
fully traverse the history.
* jk/pack-bitmap: (26 commits)
ewah: unconditionally ntohll ewah data
ewah: support platforms that require aligned reads
read-cache: use get_be32 instead of hand-rolled ntoh_l
block-sha1: factor out get_be and put_be wrappers
do not discard revindex when re-preparing packfiles
pack-bitmap: implement optional name_hash cache
t/perf: add tests for pack bitmaps
t: add basic bitmap functionality tests
count-objects: recognize .bitmap in garbage-checking
repack: consider bitmaps when performing repacks
repack: handle optional files created by pack-objects
repack: turn exts array into array-of-struct
repack: stop using magic number for ARRAY_SIZE(exts)
pack-objects: implement bitmap writing
rev-list: add bitmap mode to speed up object lists
pack-objects: use bitmaps when packing objects
pack-objects: split add_object_entry
pack-bitmap: add support for bitmap indexes
documentation: add documentation for the bitmap format
ewah: compressed bitmap implementation
...
* ks/tree-diff-walk:
tree-walk: finally switch over tree descriptors to contain a pre-parsed entry
revision: convert to using diff_tree_sha1()
line-log: convert to using diff_tree_sha1()
tree-diff: convert diff_root_tree_sha1() to just call diff_tree_sha1 with old=NULL
tree-diff: allow diff_tree_sha1 to accept NULL sha1
This helps reduce the number of match_pathspec_depth() call sites and
show how match_pathspec_depth() is used.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clear that we don't use fnmatch() anymore.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --left-right A...B" lost the "leftness" of commits
reachable from A when A is a tag as a side effect of a recent
bugfix. This is a regression in 1.8.4.x series.
* jc/revision-range-unpeel:
revision: propagate flag bits from tags to pointees
revision: mark contents of an uninteresting tree uninteresting
Since diff_tree_sha1() can now accept empty trees via NULL sha1, we
could just call it without manually reading trees into tree_desc and
duplicating code.
Besides, that
if (!tree)
return 0;
looked suspect - we were saying an invalid tree != empty tree, but maybe it is
better to just say the tree is invalid here, which is what diff_tree_sha1()
does for such case.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --left-right A...B" lost the "leftness" of commits
reachable from A when A is a tag as a side effect of a recent
bugfix. This is a regression in 1.8.4.x series.
* jc/revision-range-unpeel:
revision: propagate flag bits from tags to pointees
revision: mark contents of an uninteresting tree uninteresting
With the previous fix 895c5ba3 (revision: do not peel tags used in
range notation, 2013-09-19), handle_revision_arg() that processes
command line arguments for the "git log" family of commands no
longer directly places the object pointed by the tag in the pending
object array when it sees a tag object. We used to place pointee
there after copying the flag bits like UNINTERESTING and
SYMMETRIC_LEFT.
This change meant that any flag that is relevant to later history
traversal must now be propagated to the pointed objects (most often
these are commits) while starting the traversal, which is partly
done by handle_commit() that is called from prepare_revision_walk().
We did propagate UNINTERESTING, but did not do so for others, most
notably SYMMETRIC_LEFT. This caused "git log --left-right v1.0..."
(where "v1.0" is a tag) to start losing the "leftness" from the
commit the tag points at.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-list --objects ^A^{tree} B^{tree}" ought to mean "I want a
list of objects inside B's tree, but please exclude the objects that
appear inside A's tree".
we see the top-level tree marked as uninteresting (i.e. ^A^{tree} in
the above example) and call mark_tree_uninteresting() on it; this
unfortunately prevents us from recursing into the tree and marking
the objects in the tree as uninteresting.
The reason why "git log ^A A" yields an empty set of commits,
i.e. we do not have a similar issue for commits, is because we call
mark_parents_uninteresting() after seeing an uninteresting commit.
The uninteresting-ness of the commit itself does not prevent its
parents from being marked as uninteresting.
Introduce mark_tree_contents_uninteresting() and structure the code
in handle_commit() in such a way that it makes it the responsibility
of the callchain leading to this function to mark commits, trees and
blobs as uninteresting, and also make it the responsibility of the
helpers called from this function to mark objects that are reachable
from them.
Note that this is a very old bug that probably dates back to the day
when "rev-list --objects" was introduced. The line to clear
tree->object.parsed at the end of mark_tree_contents_uninteresting()
can be removed when this fix is merged to the codebase after
6e454b9a (clear parsed flag when we free tree buffers, 2013-06-05).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a few duplicate implementations of prefix/suffix comparison
functions, and rename them to starts_with and ends_with.
* cc/starts-n-ends-with:
replace {pre,suf}fixcmp() with {starts,ends}_with()
strbuf: introduce starts_with() and ends_with()
builtin/remote: remove postfixcmp() and use suffixcmp() instead
environment: normalize use of prefixcmp() by removing " != 0"
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
People often wished a way to tell "git log --branches" (and "git
log --remotes --not --branches") to exclude some local branches
from the expansion of "--branches" (similarly for "--tags", "--all"
and "--glob=<pattern>"). Now they have one.
* jc/ref-excludes:
rev-parse: introduce --exclude=<glob> to tame wildcards
rev-list --exclude: export add/clear-ref-exclusion and ref-excluded API
rev-list --exclude: tests
document --exclude option
revision: introduce --exclude=<glob> to tame wildcards
All callers to parse_pathspec() must choose between getting no
pathspec or one path that is limited to the current directory
when there is no paths given on the command line, but there were
two callers that violated this rule, triggering a BUG().
* nd/magic-pathspec:
Fix calling parse_pathspec with no paths nor PATHSPEC_PREFER_* flags
"git rev-list --objects ^v1.0^ v1.0" gave v1.0 tag itself in the
output, but "git rev-list --objects v1.0^..v1.0" did not.
* jc/revision-range-unpeel:
revision: do not peel tags used in range notation
Normally parse_pathspec() is used on command line arguments where it
can do fancy thing like parsing magic on each argument or adding magic
for all pathspecs based on --*-pathspecs options.
There's another use of parse_pathspec(), where pathspec is needed, but
the input is known to be pure paths. In this case we usually don't
want --*-pathspecs to interfere. And we definitely do not want to
parse magic in these paths, regardless of --literal-pathspecs.
Add new flag PATHSPEC_LITERAL_PATH for this purpose. When it's set,
--*-pathspecs are ignored, no magic is parsed. And if the caller
allows PATHSPEC_LITERAL (i.e. the next calls can take literal magic),
then PATHSPEC_LITERAL will be set.
This fixes cases where git chokes when GIT_*_PATHSPECS are set because
parse_pathspec() indicates it won't take any magic. But
GIT_*_PATHSPECS add them anyway. These are
export GIT_LITERAL_PATHSPECS=1
git blame -- something
git log --follow something
git log --merge
"git ls-files --with-tree=path" (aka parse_pathspec() in
overlay_tree_on_cache()) is safe because the input is empty, and
producing one pathspec due to PATHSPEC_PREFER_CWD does not take any
magic into account.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit enables users of `struct rev_info` to peform custom limiting
during a revision walk (i.e. `get_revision`).
If the field `include_check` has been set to a callback, this callback
will be issued once for each commit before it is added to the "pending"
list of the revwalk. If the include check returns 0, the commit will be
marked as added but won't be pushed to the pending list, effectively
limiting the walk.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parse_pathspec() is called with no paths, the behavior could be
either return no paths, or return one path that is cwd. Some commands
do the former, some the latter. parse_pathspec() itself does not make
either the default and requires the caller to specify either flag if
it may run into this situation.
I've grep'd through all parse_pathspec() call sites. Some pass
neither, but those are guaranteed never pass empty path to
parse_pathspec(). There are two call sites that may pass empty path
and are fixed with this patch.
[jc: added a test from Antoine's bug report]
Reported-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A range notation "A..B" means exactly the same thing as what "^A B"
means, i.e. the set of commits that are reachable from B but not
from A. But the internal representation after the revision parser
parsed these two notations are subtly different.
- "rev-list ^A B" leaves A and B in the revs->pending.objects[]
array, with the former marked as UNINTERESTING and the revision
traversal machinery propagates the mark to underlying commit
objects A^0 and B^0.
- "rev-list A..B" peels tags and leaves A^0 (marked as
UNINTERESTING) and B^0 in revs->pending.objects[] array before
the traversal machinery kicks in.
This difference usually does not matter, but starts to matter when
the --objects option is used. For example, we see this:
$ git rev-list --objects v1.8.4^1..v1.8.4 | grep $(git rev-parse v1.8.4)
$ git rev-list --objects v1.8.4 ^v1.8.4^1 | grep $(git rev-parse v1.8.4)
04f013dc38d7512eadb915eba22efc414f18b869 v1.8.4
With the former invocation, the revision traversal machinery never
hears about the tag v1.8.4 (it only sees the result of peeling it,
i.e. the commit v1.8.4^0), and the tag itself does not appear in the
output. The latter does send the tag object itself to the output.
Make the range notation keep the unpeeled objects and feed them to
the traversal machinery to fix this inconsistency.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of typing four capital letters "HEAD", you can say "@" now,
e.g. "git log @".
* fc/at-head:
Add new @ shortcut for HEAD
sha1-name: pass len argument to interpret_branch_name()
"git mv A B" when moving a submodule A does "the right thing",
inclusing relocating its working tree and adjusting the paths in
the .gitmodules file.
* jl/submodule-mv: (53 commits)
rm: delete .gitmodules entry of submodules removed from the work tree
mv: update the path entry in .gitmodules for moved submodules
submodule.c: add .gitmodules staging helper functions
mv: move submodules using a gitfile
mv: move submodules together with their work trees
rm: do not set a variable twice without intermediate reading.
t6131 - skip tests if on case-insensitive file system
parse_pathspec: accept :(icase)path syntax
pathspec: support :(glob) syntax
pathspec: make --literal-pathspecs disable pathspec magic
pathspec: support :(literal) syntax for noglob pathspec
kill limit_pathspec_to_literal() as it's only used by parse_pathspec()
parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN
parse_pathspec: make sure the prefix part is wildcard-free
rename field "raw" to "_raw" in struct pathspec
tree-diff: remove the use of pathspec's raw[] in follow-rename codepath
remove match_pathspec() in favor of match_pathspec_depth()
remove init_pathspec() in favor of parse_pathspec()
remove diff_tree_{setup,release}_paths
convert common_prefix() to use struct pathspec
...
This is useful to make sure we don't step outside the boundaries of what
we are interpreting at the moment. For example while interpreting
foobar@{u}~1, the job of interpret_branch_name() ends right before ~1,
but there's no way to figure that out inside the function, unless the
len argument is passed.
So let's do that.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
People often find "git log --branches" etc. that includes _all_
branches is cumbersome to use when they want to grab most but except
some. The same applies to --tags, --all and --glob.
Teach the revision machinery to remember patterns, and then upon the
next such a globbing option, exclude those that match the pattern.
With this, I can view only my integration branches (e.g. maint,
master, etc.) without topic branches, which are named after two
letters from primary authors' names, slash and topic name.
git rev-list --no-walk --exclude=??/* --branches |
git name-rev --refs refs/heads/* --stdin
This one shows things reachable from local and remote branches that
have not been merged to the integration branches.
git log --remotes --branches --not --exclude=??/* --branches
It may be a bit rough around the edges, in that the pattern to give
the exclude option depends on what globbing option follows. In
these examples, the pattern "??/*" is used, not "refs/heads/??/*",
because the globbing option that follows the -"-exclude=<pattern>"
is "--branches". As each use of globbing option resets previously
set "--exclude", this may not be such a bad thing, though.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reflog walking logic (git log -g) replaces the true parent list
with the preceding commit in the reflog. This results in bogus commit
diffs when combined with options such as -p; the diff is against the
reflog predecessor, not the parent of the commit.
Save the true parents on the side, extending the functions from the
previous commit. The diff logic picks them up and uses them to show
the correct diffs.
We do have to be somewhat careful about repeated calling of
save_parents(), since the reflog may list a commit more than once. We
now store (commit_list*)-1 to distinguish the "not saved yet" and
"root commit" cases. This lets us preserve an empty parent list even
if save_parents() is repeatedly called.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using pathspec filtering in combination with diff-based log
output, parent simplification happens before the diff is computed.
The diff is therefore against the *simplified* parents.
This works okay, arguably by accident, in the normal case:
simplification reduces to one parent as long as the commit is TREESAME
to it. So the simplified parent of any given commit must have the
same tree contents on the filtered paths as its true (unfiltered)
parent.
However, --full-diff breaks this guarantee, and indeed gives pretty
spectacular results when comparing the output of
git log --graph --stat ...
git log --graph --full-diff --stat ...
(--graph internally kicks in parent simplification, much like
--parents).
To fix it, store a copy of the parent list before simplification (in a
slab) whenever --full-diff is in effect. Then use the stored parents
instead of the simplified ones in the commit display code paths. The
latter do not actually check for --full-diff to avoid duplicated code;
they just grab the original parents if save_parents() has not been
called for this revision walk.
For ordinary commits it should be obvious that this is the right thing
to do.
Merge commits are a bit subtle. Observe that with default
simplification, merge simplification is an all-or-nothing decision:
either the merge is TREESAME to one parent and disappears, or it is
different from all parents and the parent list remains intact.
Redundant parents are not pruned, so the existing code also shows them
as a merge.
So if we do show a merge commit, the parent list just consists of the
rewrite result on each parent. Running, e.g., --cc on this in
--full-diff mode is not very useful: if any commits were skipped, some
hunks will disagree with all sides of the merge (with one side,
because commits were skipped; with the others, because they didn't
have those changes in the first place). This triggers --cc showing
these hunks spuriously.
Therefore I believe that even for merge commits it is better to show
the diffs wrt. the original parents.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at there, move free_pathspec() to pathspec.c
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These call sites follow the pattern:
paths = get_pathspec(prefix, argv);
init_pathspec(&pathspec, paths);
which can be converted into a single parse_pathspec() call.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I attempted to make index_state->cache[] a "const struct cache_entry **"
to find out how existing entries in index are modified and where. The
question I have is what do we do if we really need to keep track of on-disk
changes in the index. The result is
- diff-lib.c: setting CE_UPTODATE
- name-hash.c: setting CE_HASHED
- preload-index.c, read-cache.c, unpack-trees.c and
builtin/update-index: obvious
- entry.c: write_entry() may refresh the checked out entry via
fill_stat_cache_info(). This causes "non-const struct cache_entry
*" in builtin/apply.c, builtin/checkout-index.c and
builtin/checkout.c
- builtin/ls-files.c: --with-tree changes stagemask and may set
CE_UPDATE
Of these, write_entry() and its call sites are probably most
interesting because it modifies on-disk info. But this is stat info
and can be retrieved via refresh, at least for porcelain
commands. Other just uses ce_flags for local purposes.
So, keeping track of "dirty" entries is just a matter of setting a
flag in index modification functions exposed by read-cache.c. Except
unpack-trees, the rest of the code base does not do anything funny
behind read-cache's back.
The actual patch is less valueable than the summary above. But if
anyone wants to re-identify the above sites. Applying this patch, then
this:
diff --git a/cache.h b/cache.h
index 430d021..1692891 100644
--- a/cache.h
+++ b/cache.h
@@ -267,7 +267,7 @@ static inline unsigned int canon_mode(unsigned int mode)
#define cache_entry_size(len) (offsetof(struct cache_entry,name) + (len) + 1)
struct index_state {
- struct cache_entry **cache;
+ const struct cache_entry **cache;
unsigned int version;
unsigned int cache_nr, cache_alloc, cache_changed;
struct string_list *resolve_undo;
will help quickly identify them without bogus warnings.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log" learned the "--author-date-order" option, with which the
output is topologically sorted and commits in parallel histories
are shown intermixed together based on the author timestamp.
* jc/topo-author-date-sort:
t6003: add --author-date-order test
topology tests: teach a helper to set author dates as well
t6003: add --date-order test
topology tests: teach a helper to take abbreviated timestamps
t/lib-t6000: style fixes
log: --author-date-order
sort-in-topological-order: use prio-queue
prio-queue: priority queue of pointers to structs
toposort: rename "lifo" field
Define memory ownership and lifetime rules for what for-each-ref
feeds to its callbacks (in short, "you do not own it, so make a
copy if you want to keep it").
* mh/reflife: (25 commits)
refs: document the lifetime of the args passed to each_ref_fn
register_ref(): make a copy of the bad reference SHA-1
exclude_existing(): set existing_refs.strdup_strings
string_list_add_refs_by_glob(): add a comment about memory management
string_list_add_one_ref(): rename first parameter to "refname"
show_head_ref(): rename first parameter to "refname"
show_head_ref(): do not shadow name of argument
add_existing(): do not retain a reference to sha1
do_fetch(): clean up existing_refs before exiting
do_fetch(): reduce scope of peer_item
object_array_entry: fix memory handling of the name field
find_first_merges(): remove unnecessary code
find_first_merges(): initialize merges variable using initializer
fsck: don't put a void*-shaped peg in a char*-shaped hole
object_array_remove_duplicates(): rewrite to reduce copying
revision: use object_array_filter() in implementation of gc_boundary()
object_array: add function object_array_filter()
revision: split some overly-long lines
cmd_diff(): make it obvious which cases are exclusive of each other
cmd_diff(): rename local variable "list" -> "entry"
...
Major update to the revision traversal logic to improve culling of
irrelevant parents while traversing a mergy history.
* kb/full-history-compute-treesame-carefully-2:
revision.c: make default history consider bottom commits
revision.c: don't show all merges for --parents
revision.c: discount side branches when computing TREESAME
revision.c: add BOTTOM flag for commits
simplify-merges: drop merge from irrelevant side branch
simplify-merges: never remove all TREESAME parents
t6012: update test for tweaked full-history traversal
revision.c: Make --full-history consider more merges
Documentation: avoid "uninteresting"
rev-list-options.txt: correct TREESAME for P
t6111: add parents to tests
t6111: allow checking the parents as well
t6111: new TREESAME test set
t6019: test file dropped in -s ours merge
decorate.c: compact table when growing
Sometimes people would want to view the commits in parallel
histories in the order of author dates, not committer dates.
Teach "topo-order" sort machinery to do so, using a commit-info slab
to record the author dates of each commit, and prio-queue to sort
them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The primary invariant of sort_in_topological_order() is that a
parent commit is not emitted until all children of it are. When
traversing a forked history like this with "git log C E":
A----B----C
\
D----E
we ensure that A is emitted after all of B, C, D, and E are done, B
has to wait until C is done, and D has to wait until E is done.
In some applications, however, we would further want to control how
these child commits B, C, D and E on two parallel ancestry chains
are shown.
Most of the time, we would want to see C and B emitted together, and
then E and D, and finally A (i.e. the --topo-order output). The
"lifo" parameter of the sort_in_topological_order() function is used
to control this behaviour. We start the traversal by knowing two
commits, C and E. While keeping in mind that we also need to
inspect E later, we pick C first to inspect, and we notice and
record that B needs to be inspected. By structuring the "work to be
done" set as a LIFO stack, we ensure that B is inspected next,
before other in-flight commits we had known that we will need to
inspect, e.g. E.
When showing in --date-order, we would want to see commits ordered
by timestamps, i.e. show C, E, B and D in this order before showing
A, possibly mixing commits from two parallel histories together.
When "lifo" parameter is set to false, the function keeps the "work
to be done" set sorted in the date order to realize this semantics.
After inspecting C, we add B to the "work to be done" set, but the
next commit we inspect from the set is E which is newer than B.
The name "lifo", however, is too strongly tied to the way how the
function implements its behaviour, and does not describe what the
behaviour _means_.
Replace this field with an enum rev_sort_order, with two possible
values: REV_SORT_IN_GRAPH_ORDER and REV_SORT_BY_COMMIT_DATE, and
update the existing code. The mechanical replacement rule is:
"lifo == 0" is equivalent to "sort_order == REV_SORT_BY_COMMIT_DATE"
"lifo == 1" is equivalent to "sort_order == REV_SORT_IN_GRAPH_ORDER"
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many code paths will free a tree object's buffer and set it
to NULL after finishing with it in order to keep memory
usage down during a traversal. However, out of 8 sites that
do this, only one actually unsets the "parsed" flag back.
Those sites that don't are setting a trap for later users of
the tree object; even after calling parse_tree, the buffer
will remain NULL, causing potential segfaults.
It is not known whether this is triggerable in the current
code. Most commands do not do an in-memory traversal
followed by actually using the objects again. However, it
does not hurt to be safe for future callers.
In most cases, we can abstract this out to a
"free_tree_buffer" helper. However, there are two
exceptions:
1. The fsck code relies on the parsed flag to know that we
were able to parse the object at one point. We can
switch this to using a flag in the "flags" field.
2. The index-pack code sets the buffer to NULL but does
not free it (it is freed by a caller). We should still
unset the parsed flag here, but we cannot use our
helper, as we do not want to free the buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/line-log:
git-log(1): remove --full-line-diff description
line-log: fix documentation formatting
log -L: improve comments in process_all_files()
log -L: store the path instead of a diff_filespec
log -L: test merge of parallel modify/rename
t4211: pass -M to 'git log -M -L...' test
log -L: fix overlapping input ranges
log -L: check range set invariants when we look it up
Speed up log -L... -M
log -L: :pattern:file syntax to find by funcname
Implement line-history search (git log -L)
Export rewrite_parents() for 'log -L'
Refactor parse_loc
Previously, the memory management of the object_array_entry::name
field was inconsistent and undocumented. object_array_entries are
ultimately created by a single function, add_object_array_with_mode(),
which has an argument "const char *name". This function used to
simply set the name field to reference the string pointed to by the
name parameter, and nobody on the object_array side ever freed the
memory. Thus, it assumed that the memory for the name field would be
managed by the caller, and that the lifetime of that string would be
at least as long as the lifetime of the object_array_entry. But
callers were inconsistent:
* Some passed pointers to constant strings or argv entries, which was
OK.
* Some passed pointers to newly-allocated memory, but didn't arrange
for the memory ever to be freed.
* Some passed the return value of sha1_to_hex(), which is a pointer to
a statically-allocated buffer that can be overwritten at any time.
* Some passed pointers to refnames that they received from a
for_each_ref()-type iteration, but the lifetimes of such refnames is
not guaranteed by the refs API.
Bring consistency to this mess by changing object_array to make its
own copy for the object_array_entry::name field and free this memory
when an object_array_entry is deleted from the array.
Many callers were passing the empty string as the name parameter, so
as a performance optimization, treat the empty string specially.
Instead of making a copy, store a pointer to a statically-allocated
empty string to object_array_entry::name. When deleting such an
entry, skip the free().
Change the callers that were already passing copies to
add_object_array_with_mode() to either skip the copy, or (if the
memory needed to be allocated anyway) freeing the memory itself.
A part of this commit effectively reverts
70d26c6e76 read_revisions_from_stdin: make copies for handle_revision_arg
because the copying introduced by that commit (which is still
necessary) is now done at a deeper level.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use object_array_filter(), which will soon be made smarter about
cleaning up discarded entries properly. Also add a function comment.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of assuming that the memory pointed to by the name argument
will live forever, make a local copy of it before storing it in the
ref_cmdline_info.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, the default history treated bottom commits the same as any
other UNINTERESTING commit, which could force it down side branches.
Consider the following history:
*A--*B---D--*F * marks !TREESAME parent paths
\ /*
`-C-'
When requesting "B..F", B is UNINTERESTING but TREESAME to D. C is
!UNINTERESTING.
So default following would go from D into the irrelevant side branch C
to A, rather than to B. Note also that if there had been an extra
!UNINTERESTING commit B1 between B and D, it wouldn't have gone down C.
Change the default following to test relevant_commit() instead of
!UNINTERESTING, so it can proceed straight from D to B, thus finishing
the traversal of that path.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using --parents or --children, get_commit_action() previously showed
all merges, even if TREESAME to both parents.
This was intended to tie together the topology of the rewritten parents,
but it was excessive - in fact we only need to show merges that have two
or more relevant parents. Merges at the boundary do not necessarily need
to be shown.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the BOTTOM flag to define relevance for pruning. Relevant commits
are those that are !UNINTERESTING or BOTTOM, and this allows us to
identify irrelevant side branches (UNINTERESTING && !BOTTOM).
If a merge has relevant parents, and it is TREESAME to them, then do not
let irrelevant parents cause the merge to be treated as !TREESAME.
When considering simplification, don't always include all merges -
merges with exactly one relevant parent can be simplified, if TREESAME
according to the above rule.
These two changes greatly increase simplification in limited, pruned
revision lists.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When performing edge-based operations on the revision graph, it can be
useful to be able to identify the INTERESTING graph's connection(s) to
the bottom commit(s) specified by the user.
Conceptually when the user specifies "A..B" (== B ^A), they are asking
for the history from A to B. The first connection from A onto the
INTERESTING graph is part of that history, and should be considered. If
we consider only INTERESTING nodes and their connections, then we're
really only considering the history from A's immediate descendants to B.
This patch does not change behaviour, but adds a new BOTTOM flag to
indicate the bottom commits specified by the user, ready to be used by
following patches.
We immediately use the BOTTOM flag to return collect_bottom_commits() to
its original approach of examining the pending commit list rather than
the command line. This will ensure alignment of the definition of
"bottom" with future patches.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement commit 4b7f53da on top of the new simplify-merges
infrastructure, tightening the condition to only consider root parents;
the original version incorrectly dropped parents that were TREESAME to
anything.
Original log message follows.
The merge simplification rule stated in 6546b59 (revision traversal:
show full history with merge simplification, 2008-07-31) still
treated merge commits too specially. Namely, in a history with this
shape:
---o---o---M
/
x---x---x
where three 'x' were on a history completely unrelated to the main
history 'o' and do not touch any of the paths we are following, we
still said that after simplifying all of the parents of M, 'x'
(which is the leftmost 'x' that rightmost 'x simplifies down to) and
'o' (which would be the last commit on the main history that touches
the paths we are following) are independent from each other, and
both need to be kept.
That is incorrect; when the side branch 'x' never touches the paths,
it should be removed to allow M to simplify down to the last commit
on the main history that touches the paths.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When simplifying an odd merge, such as one that used "-s ours", we may
find ourselves TREESAME to apparently redundant parents. Prevent
simplify_merges() from removing every TREESAME parent; if this would
happen reinstate the first TREESAME parent - the one that the default
log would have followed.
This avoids producing a totally disjoint history from the default log
when the default log is a better explanation of the end result, and aids
visualisation of odd merges.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
History simplification previously always treated merges as TREESAME
if they were TREESAME to any parent.
While this was consistent with the default behaviour, this could be
extremely unhelpful when searching detailed history, and could not be
overridden. For example, if a merge had ignored a change, as if by "-s
ours", then:
git log -m -p --full-history -Schange file
would successfully locate "change"'s addition but would not locate the
merge that resolved against it.
Futher, simplify_merges could drop the actual parent that a commit
was TREESAME to, leaving it as a normal commit marked TREESAME that
isn't actually TREESAME to its remaining parent.
Now redefine a commit's TREESAME flag to be true only if a commit is
TREESAME to _all_ of its parents. This doesn't affect either the default
simplify_history behaviour (because partially TREESAME merges are turned
into normal commits), or full-history with parent rewriting (because all
merges are output). But it does affect other modes. The clearest
difference is that --full-history will show more merges - sufficient to
ensure that -m -p --full-history log searches can really explain every
change to the file, including those changes' ultimate fate in merges.
Also modify simplify_merges to recalculate TREESAME after removing
a parent. This is achieved by storing per-parent TREESAME flags on the
initial scan, so the combined flag can be easily recomputed.
This fixes some t6111 failures, but creates a couple of new ones -
we are now showing some merges that don't need to be shown.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation assures users that "A...B" is defined as "A B --not
$(git merge-base --all A B)". This wasn't in fact quite true, because
the calculated merge bases were not sent to add_rev_cmdline().
The main effect of this was that although
git rev-list --ancestry-path A B --not $(git merge-base --all A B)
worked, the simpler form
git rev-list --ancestry-path A...B
failed with a "no bottom commits" error.
Other potential users of bottom commits could also be affected by this
problem, if they examine revs->cmdline_info; I came across the issue in
my proposed history traversal refinements series.
So ensure that the calculated merge bases are sent to add_rev_cmdline(),
flagged with new 'whence' enum value REV_CMD_MERGE_BASE.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pretty-printing body of the commit that is stored in non UTF-8
encoding did not work well. The early part of this series fixes
it. And then it adds %C(auto) specifier that turns the coloring on
when we are emitting to the terminal, and adds column-aligning
format directives.
* nd/pretty-formats:
pretty: support %>> that steal trailing spaces
pretty: support truncating in %>, %< and %><
pretty: support padding placeholders, %< %> and %><
pretty: add %C(auto) for auto-coloring
pretty: split color parsing into a separate function
pretty: two phase conversion for non utf-8 commits
utf8.c: add reencode_string_len() that can handle NULs in string
utf8.c: add utf8_strnwidth() with the ability to skip ansi sequences
utf8.c: move display_mode_esc_sequence_len() for use by other functions
pretty: share code between format_decoration and show_decorations
pretty-formats.txt: wrap long lines
pretty: get the correct encoding for --pretty:format=%e
pretty: save commit encoding from logmsg_reencode if the caller needs it
A fix to a long-standing issue in the command line parser for
revisions, which was triggered by mv/sequence-pick-error-diag topic.
* tr/copy-revisions-from-stdin:
read_revisions_from_stdin: make copies for handle_revision_arg
The commit encoding is parsed by logmsg_reencode, there's no need for
the caller to re-parse it again. The reencoded message now has the new
encoding, not the original one. The caller would need to read commit
object again before parsing.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read_revisions_from_stdin() has passed pointers to its read buffer
down to handle_revision_arg() since its inception way back in 42cabc3
(Teach rev-list an option to read revs from the standard input.,
2006-09-05). Even back then, this was a bug: through
add_pending_object, the argument was recorded in the object_array's
'name' field.
Fix it by making a copy whenever read_revisions_from_stdin() passes an
argument down the callchain. The other caller runs handle_revision_arg()
on argv[], where it would be redundant to make a copy.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kevin Bracey reports that the change regresses a case shown in the
user manual.
Trading one fix with another breakage is not worth it. Just keep
the test to document the existing breakage, and revert the change
for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.8.1:
Start preparing for 1.8.1.6
git-tag(1): we tag HEAD by default
Fix revision walk for commits with the same dates
t2003: work around path mangling issue on Windows
pack-refs: add fully-peeled trait
pack-refs: write peeled entry for non-tags
use parse_object_or_die instead of die("bad object")
avoid segfaults on parse_object failure
entry: fix filter lookup
t2003: modernize style
name-hash.c: fix endless loop with core.ignorecase=true
Allow the revision "slop" code to look deeper while commits with
exactly the same timestamps come next to each other (which can
often happen after a large "am" and "rebase" session).
* kk/revwalk-slop-too-many-commit-within-a-second:
Fix revision walk for commits with the same dates
The --simplify-merges logic did not cull irrelevant parents from a
merge that is otherwise not interesting with respect to the paths
we are following.
This touches a fairly core part of the revision traversal
infrastructure; even though I think this change is correct, please
report immediately if you find any unintended side effect.
* jc/remove-treesame-parent-in-simplify-merges:
simplify-merges: drop merge from irrelevant side branch
This is a rewrite of much of Bo's work, mainly in an effort to split
it into smaller, easier to understand routines.
The algorithm is built around the struct range_set, which encodes a
series of line ranges as intervals [a,b). This is used in two
contexts:
* A set of lines we are tracking (which will change as we dig through
history).
* To encode diffs, as pairs of ranges.
The main routine is range_set_map_across_diff(). It processes the
diff between a commit C and some parent P. It determines which diff
hunks are relevant to the ranges tracked in C, and computes the new
ranges for P.
The algorithm is then simply to process history in topological order
from newest to oldest, computing ranges and (partial) diffs. At
branch points, we need to merge the ranges we are watching. We will
find that many commits do not affect the chosen ranges, and mark them
TREESAME (in addition to those already filtered by pathspec limiting).
Another pass of history simplification then gets rid of such commits.
This is wired as an extra filtering pass in the log machinery. This
currently only reduces code duplication, but should allow for other
simplifications and options to be used.
Finally, we hook a diff printer into the output chain. Ideally we
would wire directly into the diff logic, to optionally use features
like word diff. However, that will require some major reworking of
the diff chain, so we completely replace the output with our own diff
for now.
As this was a GSoC project, and has quite some history by now, many
people have helped. In no particular order, thanks go to
Jakub Narebski <jnareb@gmail.com>
Jens Lehmann <Jens.Lehmann@web.de>
Jonathan Nieder <jrnieder@gmail.com>
Junio C Hamano <gitster@pobox.com>
Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Will Palmer <wmpalmer@gmail.com>
Apologies to everyone I forgot.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function rewrite_one is used to rewrite a single
parent of the current commit, and is used by rewrite_parents
to rewrite all the parents.
Decouple the dependence between them by making rewrite_one
a callback function that is passed to rewrite_parents. Then
export rewrite_parents for reuse by the line history browser.
We will use this function in line-log.c.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Logic in still_interesting function allows to stop the commits
traversing if the oldest processed commit is not older then the
youngest commit on the list to process and the list contains only
commits marked as not interesting ones. It can be premature when dealing
with a set of coequal commits. For example git rev-list A^! --not B
provides wrong answer if all commits in the range A..B had the same
commit time and there are more then 7 of them.
To fix this problem the relevant part of the logic in still_interesting
is changed to: the walk can be stopped if the oldest processed commit is
younger then the youngest commit on the list to processed.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you run "git log --grep=foo", we will run your regex on
the literal bytes of the commit message. This can provide
confusing results if the commit message is not in the same
encoding as your grep expression (or worse, you have commits
in multiple encodings, in which case your regex would need
to be written to match either encoding). On top of this, we
might also be grepping in the commit's notes, which are
already re-encoded, potentially leading to grepping in a
buffer with mixed encodings concatenated. This is insanity,
but most people never noticed, because their terminal and
their commit encodings all match.
Instead, let's massage the to-be-grepped commit into a
standardized encoding. There is not much point in adding a
flag for "this is the encoding I expect my grep pattern to
match"; the only sane choice is for it to use the log output
encoding. That is presumably what the user's terminal is
using, and it means that the patterns found by the grep will
match the output produced by git.
As a bonus, this fixes a potential segfault in commit_match
when commit->buffer is NULL, as we now build on logmsg_reencode,
which handles reading the commit buffer from disk if
necessary. The segfault can be triggered with:
git commit -m 'text1' --allow-empty
git commit -m 'text2' --allow-empty
git log --graph --no-walk --grep 'text2'
which arguably does not make any sense (--graph inherently
wants a connected history, and by --no-walk the command line
is telling us to show discrete points in history without
connectivity), and we probably should forbid the
combination, but that is a separate issue.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The merge simplification rule stated in 6546b59 (revision traversal:
show full history with merge simplification, 2008-07-31) still
treated merge commits too specially. Namely, in a history with this
shape:
---o---o---M
/
x---x---x
where three 'x' were on a history completely unrelated to the main
history 'o' and do not touch any of the paths we are following, we
still said that after simplifying all of the parents of M, 'x'
(which is the leftmost 'x' that rightmost 'x simplifies down to) and
'o' (which would be the last commit on the main history that touches
the paths we are following) are independent from each other, and
both need to be kept.
That is incorrect; when the side branch 'x' never touches the paths,
it should be removed to allow M to simplify down to the last commit
on the main history that touches the paths.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we taught the commit_match() mechanism to pay attention to the
new --use-mailmap option, we started to unconditionally copy the
commit object to a temporary buffer, just in case we need the author
and committer lines updated via the mailmap mechanism, and rewrite
author and committer using the mailmap.
It turns out that this has a rather unpleasant performance
implications. In the linux kernel repository, running
$ git log --author='Junio C Hamano' --pretty=short >/dev/null
under /usr/bin/time, with and without --use-mailmap (the .mailmap
file is 118 entries long, the particular author does not appear in
it), cost (with warm cache):
[without --use-mailmap]
5.42user 0.26system 0:05.70elapsed 99%CPU (0avgtext+0avgdata 2005936maxresident)k
0inputs+0outputs (0major+137669minor)pagefaults 0swaps
[with --use-mailmap]
6.47user 0.30system 0:06.78elapsed 99%CPU (0avgtext+0avgdata 2006288maxresident)k
0inputs+0outputs (0major+137692minor)pagefaults 0swaps
which incurs about 20% overhead. The command is doing extra work,
so the extra cost may be justified.
But it is inexcusable to pay the cost when we do not need
author/committer match. In the same repository,
$ git log --grep='fix menuconfig on debian lenny' --pretty=short >/dev/null
shows very similar numbers as the above:
[without --use-mailmap]
5.32user 0.30system 0:05.63elapsed 99%CPU (0avgtext+0avgdata 2005984maxresident)k
0inputs+0outputs (0major+137672minor)pagefaults 0swaps
[with --use-mailmap]
6.64user 0.24system 0:06.89elapsed 99%CPU (0avgtext+0avgdata 2006320maxresident)k
0inputs+0outputs (0major+137694minor)pagefaults 0swaps
The latter case is an unnecessary performance regression. We may
want to _show_ the result with mailmap applied, but we do not have
to copy and rewrite the author/committer of all commits we try to
match if we do not query for these fields.
Trivially optimize this performace regression by limiting the
rewrites for only when we are matching with author/committer fields.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently you can use mailmap to display log authors and committers
but you can't use the mailmap to find commits with mapped values.
This commit allows you to run:
git log --use-mailmap --author mapped_name_or_email
git log --use-mailmap --committer mapped_name_or_email
Of course it only works if the --use-mailmap option is used.
The new name and email are copied only when necessary.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Emit the notes attached to the commit in "format-patch --notes"
output after three-dashes.
* jc/prettier-pretty-note:
format-patch: add a blank line between notes and diffstat
Doc User-Manual: Patch cover letter, three dashes, and --notes
Doc format-patch: clarify --notes use case
Doc notes: Include the format-patch --notes option
Doc SubmittingPatches: Mention --notes option after "cover letter"
Documentation: decribe format-patch --notes
format-patch --notes: show notes after three-dashes
format-patch: append --signature after notes
pretty_print_commit(): do not append notes message
pretty: prepare notes message at a centralized place
format_note(): simplify API
pretty: remove reencode_commit_message()
We either stuff the notes message without modification for %N
userformat, or format it for human consumption. Using two bits
is an overkill that does not benefit anybody.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we added the "--perl-regexp" option (or "-P") to "git grep", we
should have done the same for the commands in the "git log" family,
but somehow we forgot to do so. This corrects it, but we will
reserve the short-and-sweet "-P" option for something else for now.
Also introduce the "--basic-regexp" option for completeness, so that
the "last one wins" principle can be used to defeat an earlier -E
option, e.g. "git log -E --basic-regexp --grep='<bre>'". Note that
it cannot have the short "-G" option as the option is to grep in the
patch text in the context of "log" family.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line option parser for "git log -F -E --grep='<ere>'"
did not flip the "fixed" bit, violating the general "last option
wins" principle among conflicting options.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using the hand-rolled initialization sequence,
use grep_init() to populate the necessary bits. This opens
the door to allow the calling commands to optionally read
grep.* configuration variables via git_config() if they
want to.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-log-grep-all-match-1:
grep.c: make two symbols really file-scope static this time
t7810-grep: test --all-match with multiple --grep and --author options
t7810-grep: test interaction of multiple --grep and --author options
t7810-grep: test multiple --author with --all-match
t7810-grep: test multiple --grep with and without --all-match
t7810-grep: bring log --grep tests in common form
grep.c: mark private file-scope symbols as static
log: document use of multiple commit limiting options
log --grep/--author: honor --all-match honored for multiple --grep patterns
grep: show --debug output only once
grep: teach --debug option to dump the parse tree
Notes are shown after commit body. From user perspective it looks
pretty much like commit body and they may assume --grep would search
in that part too.
Make it so.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to --author/--committer which filters commits by author and
committer header fields. --grep-reflog adds a fake "reflog" header to
commit and a grep filter to search on that line.
All rules to --author/--committer apply except no timestamp stripping.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a long-standing bug in "git log --grep" when multiple "--grep"
are used together with "--all-match" and "--author" or "--committer".
* jc/maint-log-grep-all-match:
t7810-grep: test --all-match with multiple --grep and --author options
t7810-grep: test interaction of multiple --grep and --author options
t7810-grep: test multiple --author with --all-match
t7810-grep: test multiple --grep with and without --all-match
t7810-grep: bring log --grep tests in common form
grep.c: mark private file-scope symbols as static
log: document use of multiple commit limiting options
log --grep/--author: honor --all-match honored for multiple --grep patterns
grep: show --debug output only once
grep: teach --debug option to dump the parse tree
* mz/cherry-pick-cmdline-order:
cherry-pick/revert: respect order of revisions to pick
demonstrate broken 'git cherry-pick three one two'
teach log --no-walk=unsorted, which avoids sorting
Our "grep" allows complex boolean expressions to be formed to match
each individual line with operators like --and, '(', ')' and --not.
Introduce the "--debug" option to show the parse tree to help people
who want to debug and enhance it.
Also "log" learns "--grep-debug" option to do the same. The command
line parser to the log family is a lot more limited than the general
"git grep" parser, but it has special handling for header matching
(e.g. "--author"), and a parse tree is valuable when working on it.
Note that "--all-match" is *not* any individual node in the parse
tree. It is an instruction to the evaluator to check all the nodes
in the top-level backbone have matched and reject a document as
non-matching otherwise.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log .." errored out saying it is both rev range and a path when
there is no disambiguating "--" is on the command line. Update the
command line parser to interpret ".." as a path in such a case.
* jc/dotdot-is-parent-directory:
specifying ranges: we did not mean to make ".." an empty set
"git cherry-pick A C B" used to replay changes in A and then B and
then C if these three commits had committer timestamps in that
order, which is not what the user who said "A C B" naturally expects.
* mz/cherry-pick-cmdline-order:
cherry-pick/revert: respect order of revisions to pick
demonstrate broken 'git cherry-pick three one two'
teach log --no-walk=unsorted, which avoids sorting
* maint-1.7.11:
Almost 1.7.11.6
gitweb: URL-decode $my_url/$my_uri when stripping PATH_INFO
rebase -i: use full onto sha1 in reflog
sh-setup: protect from exported IFS
receive-pack: do not leak output from auto-gc to standard output
t/t5400: demonstrate breakage caused by informational message from prune
setup: clarify error messages for file/revisions ambiguity
send-email: improve RFC2047 quote parsing
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
"git diff" had a confusion between taking data from a path in the
working tree and taking data from an object that happens to have
name 0{40} recorded in a tree.
* jk/maint-null-in-trees:
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
"git log .." errored out saying it is both rev range and a path when
there is no disambiguating "--" is on the command line. Update the
command line parser to interpret ".." as a path in such a case.
* jc/dotdot-is-parent-directory:
specifying ranges: we did not mean to make ".." an empty set
When 'git log' is passed the --no-walk option, no revision walk takes
place, naturally. Perhaps somewhat surprisingly, however, the provided
revisions still get sorted by commit date. So e.g 'git log --no-walk
HEAD HEAD~1' and 'git log --no-walk HEAD~1 HEAD' give the same result
(unless the two revisions share the commit date, in which case they
will retain the order given on the command line). As the commit that
introduced --no-walk (8e64006 (Teach revision machinery about
--no-walk, 2007-07-24)) points out, the sorting is intentional, to
allow things like
git log --abbrev-commit --pretty=oneline --decorate --all --no-walk
to show all refs in order by commit date.
But there are also other cases where the sorting is not wanted, such
as
<command producing revisions in order> |
git log --oneline --no-walk --stdin
To accomodate both cases, leave the decision of whether or not to sort
up to the caller, by allowing --no-walk={sorted,unsorted}, defaulting
to 'sorted' for backward-compatibility reasons.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not want a link to 0{40} object stored anywhere in our objects.
* jk/maint-null-in-trees:
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
Either end of revision range operator can be omitted to default to HEAD,
as in "origin.." (what did I do since I forked) or "..origin" (what did
they do since I forked). But the current parser interprets ".." as an
empty range "HEAD..HEAD", and worse yet, because ".." does exist on the
filesystem, we get this annoying output:
$ cd Documentation/howto
$ git log .. ;# give me recent commits that touch Documentation/ area.
fatal: ambiguous argument '..': both revision and filename
Use '--' to separate filenames from revisions
Surely we could say "git log ../" or even "git log -- .." to disambiguate,
but we shouldn't have to.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff_setup_done() has historically returned an error code, but lost
the last nonzero return in 943d5b7 (allow diff.renamelimit to be set
regardless of -M/-C, 2006-08-09). The callers were in a pretty
confused state: some actually checked for the return code, and some
did not.
Let it return void, and patch all callers to take this into account.
This conveniently also gets rid of a handful of different(!) error
messages that could never be triggered anyway.
Note that the function can still die().
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff code represents paths using the diff_filespec
struct. This struct has a sha1 to represent the sha1 of the
content at that path, as well as a sha1_valid member which
indicates whether its sha1 field is actually useful. If
sha1_valid is not true, then the filespec represents a
working tree file (e.g., for the no-index case, or for when
the index is not up-to-date).
The diff_filespec is only used internally, though. At the
interfaces to the diff subsystem, callers feed the sha1
directly, and we create a diff_filespec from it. It's at
that point that we look at the sha1 and decide whether it is
valid or not; callers may pass the null sha1 as a sentinel
value to indicate that it is not.
We should not typically see the null sha1 coming from any
other source (e.g., in the index itself, or from a tree).
However, a corrupt tree might have a null sha1, which would
cause "diff --patch" to accidentally diff the working tree
version of a file instead of treating it as a blob.
This patch extends the edges of the diff interface to accept
a "sha1_valid" flag whenever we accept a sha1, and to use
that flag when creating a filespec. In some cases, this
means passing the flag through several layers, making the
code change larger than would be desirable.
One alternative would be to simply die() upon seeing
corrupted trees with null sha1s. However, this fix more
directly addresses the problem (while bogus sha1s in a tree
are probably a bad thing, it is really the sentinel
confusion sending us down the wrong code path that is what
makes it devastating). And it means that git is more capable
of examining and debugging these corrupted trees. For
example, you can still "diff --raw" such a tree to find out
when the bogus entry was introduced; you just cannot do a
"--patch" diff (just as you could not with any other
corrupted tree, as we do not have any content to diff).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log -n 1 -- rarely-touched-path" was spending unnecessary
cycles after showing the first change to find the next one, only to
discard it.
* jk/revision-walk-stop-at-max-count:
revision: avoid work after --max-count is reached
Teaches the object name parser things like a "git describe" output
is always a commit object, "A" in "git log A" must be a committish,
and "A" and "B" in "git log A...B" both must be committish, etc., to
prolong the lifetime of abbreviated object names.
* jc/sha1-name-more: (27 commits)
t1512: match the "other" object names
t1512: ignore whitespaces in wc -l output
rev-parse --disambiguate=<prefix>
rev-parse: A and B in "rev-parse A..B" refer to committish
reset: the command takes committish
commit-tree: the command wants a tree and commits
apply: --build-fake-ancestor expects blobs
sha1_name.c: add support for disambiguating other types
revision.c: the "log" family, except for "show", takes committish
revision.c: allow handle_revision_arg() to take other flags
sha1_name.c: introduce get_sha1_committish()
sha1_name.c: teach lookup context to get_sha1_with_context()
sha1_name.c: many short names can only be committish
sha1_name.c: get_sha1_1() takes lookup flags
sha1_name.c: get_describe_name() by definition groks only commits
sha1_name.c: teach get_short_sha1() a commit-only option
sha1_name.c: allow get_short_sha1() to take other flags
get_sha1(): fix error status regression
sha1_name.c: restructure disambiguation of short names
sha1_name.c: correct misnamed "canonical" and "res"
...
During a revision traversal in which --max-count has been
specified, we decrement a counter for each revision returned
by get_revision. When it hits 0, we typically return NULL
(the exception being if we still have boundary commits to
show).
However, before we check the counter, we call get_revision_1
to get the next commit. This might involve looking at a
large number of commits if we have restricted the traversal
(e.g., we might traverse until we find the next commit whose
diff actually matches a pathspec).
There's no need to make this get_revision_1 call when our
counter runs out. If we are not in --boundary mode, we will
just throw away the result and immediately return NULL. If
we are in --boundary mode, then we will still throw away the
result, and then start showing the boundary commits.
However, as git_revision_1 does not impact the boundary
list, it should not have an impact.
In most cases, avoiding this work will not be especially
noticeable. However, in some cases, it can make a big
difference:
[before]
$ time git rev-list -1 origin Documentation/RelNotes/1.7.11.2.txt
8d141a1d56
real 0m0.301s
user 0m0.280s
sys 0m0.016s
[after]
$ time git rev-list -1 origin Documentation/RelNotes/1.7.11.2.txt
8d141a1d56
real 0m0.010s
user 0m0.008s
sys 0m0.000s
Note that the output is produced almost instantaneously in
the first case, and then git uselessly spends a long time
looking for the next commit to touch that file (but there
isn't one, and we traverse all the way down to the roots).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git log" gets "--simplify-merges/by-decoration" together with
"--first-parent", the combination of these options makes the
simplification logic to use in-core commit objects that haven't been
examined for relevance, either producing incorrect result or taking
too long to produce any output. Teach the simplification logic to
ignore commits that the first-parent traversal logic ignored when
both are in effect to work around the issue.
* jc/rev-list-simplify-merges-first-parent:
revision: ignore side parents while running simplify-merges
revision: note the lack of free() in simplify_merges()
revision: "simplify" options imply topo-order sort
"git diff COPYING HEAD:COPYING" gave a nonsense error message that
claimed that the treeish HEAD did not have COPYING in it.
* mm/verify-filename-fix:
verify_filename(): ask the caller to chose the kind of diagnosis
sha1_name: do not trigger detailed diagnosis for file arguments
Add a field to setup_revision_opt structure and allow these callers
to tell the setup_revisions command parsing machinery that short SHA1
it encounters are meant to name committish.
This step does not go all the way to connect the setup_revisions()
to sha1_name.c yet.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing "cant_be_filename" that tells the function that the
caller knows the arg is not a path (hence it does not have to be
checked for absense of the file whose name matches it) is made into
a bit in the flag word.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many callers know that the user meant to name a committish by
syntactical positions where the object name appears. Calling this
function allows the machinery to disambiguate shorter-than-unique
abbreviated object names between committish and others.
Note that this does NOT error out when the named object is not a
committish. It is merely to give a hint to the disambiguation
machinery.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function takes user input string and returns the object name
(binary SHA-1) with mode bits and path when the object was looked
up in a tree.
Additionally give hints to help disambiguation of abbreviated object
names when the caller knows what it is looking for.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are only two callers, and they will benefit from being able to
pass disambiguation hints to underlying get_sha1_with_context() API
once it happens.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "--simplify-merges/by-decoration" is given together with
"--first-parent" to "git log", the combination of these options
makes the simplification logic to use in-core commit objects that
haven't been examined for relevance, either producing incorrect
result or taking too long to produce any output. Teach the
simplification logic to ignore commits that the first-parent
traversal logic ignored when both are in effect to work around the
issue.
verify_filename() can be called in two different contexts. Either we
just tried to interpret a string as an object name, and it fails, so
we try looking for a working tree file (i.e. we finished looking at
revs that come earlier on the command line, and the next argument
must be a pathname), or we _know_ that we are looking for a
pathname, and shouldn't even try interpreting the string as an
object name.
For example, with this change, we get:
$ git log COPYING HEAD:inexistant
fatal: HEAD:inexistant: no such path in the working tree.
Use '-- <path>...' to specify paths that do not exist locally.
$ git log HEAD:inexistant
fatal: Path 'inexistant' does not exist in 'HEAD'
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The simplify_merges() function needs to look at all history chain to
find the closest ancestor that is relevant after the simplification,
but after --first-parent traversal, side parents haven't been marked
for relevance (they are irrelevant by definition due to the nature
of first-parent-only traversal) nor culled from the parents list of
resulting commits.
We cannot simply remove these side parents from the parents list, as
the output phase still wants to see the parents. Instead, teach
simplify_one() and its callees to ignore the later parents.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Among the three similar-looking loops that walk singly linked
commit_list, the first one is only peeking and the same list is
later used for real work. Leave a comment not to mistakenly
free its elements there.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code internally runs sort_in_topo_order() already; it is more clear
to spell it out in the option parsing phase, instead of adding a special
case in simplify_merges() function.
There is no need for "commit_list_reverse()" function that only invites
inefficient code.
By René Scharfe
* rs/commit-list-append:
commit: remove commit_list_reverse()
revision: append to list instead of insert and reverse
sequencer: export commit_list_append()
The command line parser choked "git cherry-pick $name" when $name can be
both revision name and a pathname, even though $name can never be a path
in the context of the command.
The issue the patch addresses is real, but the way it is implemented felt
unnecessarily invasive a bit. It may be cleaner for this caller to add
the "--" to the end of the argv_array it passes to setup_revisions().
By Clemens Buchacher
* cb/cherry-pick-rev-path-confusion:
cherry-pick: do not expect file arguments
By using commit_list_insert(), we added new items to the top of the
list and, since this is not the order we want, reversed it afterwards.
Simplify this process by adding new items at the bottom instead,
getting rid of the reversal step.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push --recurse-submodules" learns to optionally look into the
histories of submodules bound to the superproject and push them out.
By Heiko Voigt
* hv/submodule-recurse-push:
push: teach --recurse-submodules the on-demand option
Refactor submodule push check to use string list instead of integer
Teach revision walking machinery to walk multiple times sequencially
Setting up a revision traversal with many starting points was inefficient
as these were placed in a date-order priority queue one-by-one.
By René Scharfe (3) and Junio C Hamano (1)
* rs/commit-list-sort-in-batch:
mergesort: rename it to llist_mergesort()
revision: insert unsorted, then sort in prepare_revision_walk()
commit: use mergesort() in commit_list_sort_by_date()
add mergesort() for linked lists
If a commit-ish passed to cherry-pick or revert happens to have a file
of the same name, git complains that the argument is ambiguous and
advises to use '--'. To make things worse, the '--' argument is removed
by parse_options, und so passing '--' has no effect.
Instead, always interpret cherry-pick/revert arguments as revisions.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Speed up prepare_revision_walk() by adding commits without sorting
to the commit_list and at the end sort the list in one go. Thanks
to mergesort() working behind the scenes, this is a lot faster for
large numbers of commits than the current insert sort.
Also introduce and use commit_list_reverse(), to keep the ordering
of commits sharing the same commit date unchanged. That's because
commit_list_insert_by_date() sorts commits with descending date,
but adds later entries with the same date entries last, while
commit_list_insert() always inserts entries at the top. The
following commit_list_sort_by_date() keeps the order of entries
sharing the same date.
Jeff's test case, in a repo with lots of refs, was to run:
# make a new commit on top of HEAD, but not yet referenced
sha1=`git commit-tree HEAD^{tree} -p HEAD </dev/null`
# now do the same "connected" test that receive-pack would do
git rev-list --objects $sha1 --not --all
With a git.git with a ref for each revision, master needs (best of
five):
real 0m2.210s
user 0m2.188s
sys 0m0.016s
And with this patch:
real 0m0.480s
user 0m0.456s
sys 0m0.020s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously it was not possible to iterate revisions twice using the
revision walking api. We add a reset_revision_walk() which clears the
used flags. This allows us to do multiple sequencial revision walks.
We add the appropriate calls to the existing submodule machinery doing
revision walks. This is done to avoid surprises if future code wants to
call these functions more than once during the processes lifetime.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Junio C Hamano (2) and Ramsay Jones (1)
* jc/pickaxe-ignore-case:
ctype.c: Fix a sparse warning
pickaxe: allow -i to search in patch case-insensitively
grep: use static trans-case table
"git log -S<string>" is a useful way to find the last commit in the
codebase that touched the <string>. As it was designed to be used by a
porcelain script to dig the history starting from a block of text that
appear in the starting commit, it never had to look for anything but an
exact match.
When used by an end user who wants to look for the last commit that
removed a string (e.g. name of a variable) that he vaguely remembers,
however, it is useful to support case insensitive match.
When given the "--regexp-ignore-case" (or "-i") option, which originally
was designed to affect case sensitivity of the search done in the commit
log part, e.g. "log --grep", the matches made with -S/-G pickaxe search is
done case insensitively now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/grep-binary-attribute:
grep: pre-load userdiff drivers when threaded
grep: load file data after checking binary-ness
grep: respect diff attributes for binary-ness
grep: cache userdiff_driver in grep_source
grep: drop grep_buffer's "name" parameter
convert git-grep to use grep_source interface
grep: refactor the concept of "grep source" into an object
grep: move sha1-reading mutex into low-level code
grep: make locking flag global
* jk/grep-binary-attribute:
grep: pre-load userdiff drivers when threaded
grep: load file data after checking binary-ness
grep: respect diff attributes for binary-ness
grep: cache userdiff_driver in grep_source
grep: drop grep_buffer's "name" parameter
convert git-grep to use grep_source interface
grep: refactor the concept of "grep source" into an object
grep: move sha1-reading mutex into low-level code
grep: make locking flag global
Before the grep_source interface existed, grep_buffer was
used by two types of callers:
1. Ones which pulled a file into a buffer, and then wanted
to supply the file's name for the output (i.e.,
git grep).
2. Ones which really just wanted to grep a buffer (i.e.,
git log --grep).
Callers in set (1) should now be using grep_source. Callers
in set (2) always pass NULL for the "name" parameter of
grep_buffer. We can therefore get rid of this now-useless
parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/index-pack-no-recurse:
index-pack: eliminate unlimited recursion in get_base_data()
index-pack: eliminate recursion in find_unresolved_deltas
Eliminate recursion in setting/clearing marks in commit list
