Optimization for repositories with many alternate object store.
* ew/many-alternate-optim:
oidtree: a crit-bit tree for odb_loose_cache
oidcpy_with_padding: constify `src' arg
make object_directory.loose_objects_subdir_seen a bitmap
avoid strlen via strbuf_addstr in link_alt_odb_entry
speed up alt_odb_usable() with many alternates
With many alternates, the duplicate check in alt_odb_usable()
wastes many cycles doing repeated fspathcmp() on every existing
alternate. Use a khash to speed up lookups by odb->path.
Since the kh_put_* API uses the supplied key without
duplicating it, we also take advantage of it to replace both
xstrdup() and strbuf_release() in link_alt_odb_entry() with
strbuf_detach() to avoid the allocation and copy.
In a test repository with 50K alternates and each of those 50K
alternates having one alternate each (for a total of 100K total
alternates); this speeds up lookup of a non-existent blob from
over 16 minutes to roughly 2.7 seconds on my busy workstation.
Note: all underlying git object directories were small and
unpacked with only loose objects and no packs. Having to load
packs increases times significantly.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the dir_init() function and replace it with a DIR_INIT
macro. In many cases in the codebase we need to initialize things with
a function for good reasons, e.g. needing to call another function on
initialization. The "dir_init()" function was not one such case, and
could trivially be replaced with a more idiomatic macro initialization
pattern.
The only place where we made use of its use of memset() was in
dir_clear() itself, which resets the contents of an an existing struct
pointer. Let's use the new "memcpy() a 'blank' struct on the stack"
idiom to do that reset.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clean" and "git ls-files -i" had confusion around working on
or showing ignored paths inside an ignored directory, which has
been corrected.
* en/dir-traversal:
dir: introduce readdir_skip_dot_and_dotdot() helper
dir: update stale description of treat_directory()
dir: traverse into untracked directories if they may have ignored subfiles
dir: avoid unnecessary traversal into ignored directory
t3001, t7300: add testcase showcasing missed directory traversal
t7300: add testcase showing unnecessary traversal into ignored directory
ls-files: error out on -i unless -o or -c are specified
dir: report number of visited directories and paths with trace2
dir: convert trace calls to trace2 equivalents
Many places in the code were doing
while ((d = readdir(dir)) != NULL) {
if (is_dot_or_dotdot(d->d_name))
continue;
...process d...
}
Introduce a readdir_skip_dot_and_dotdot() helper to make that a one-liner:
while ((d = readdir_skip_dot_and_dotdot(dir)) != NULL) {
...process d...
}
This helper particularly simplifies checks for empty directories.
Also use this helper in read_cached_dir() so that our statistics are
consistent across platforms. (In other words, read_cached_dir() should
have been using is_dot_or_dotdot() and skipping such entries, but did
not and left it to treat_path() to detect and mark such entries as
path_none.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide more statistics in trace2 output that include the number of
directories and total paths visited by the directory traversal logic.
Subsequent patches will take advantage of this to ensure we do not
unnecessarily traverse into ignored directories.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Builds on top of the sparse-index infrastructure to mark operations
that are not ready to mark with the sparse index, causing them to
fall back on fully-populated index that they always have worked with.
* ds/sparse-index-protections: (47 commits)
name-hash: use expand_to_path()
sparse-index: expand_to_path()
name-hash: don't add directories to name_hash
revision: ensure full index
resolve-undo: ensure full index
read-cache: ensure full index
pathspec: ensure full index
merge-recursive: ensure full index
entry: ensure full index
dir: ensure full index
update-index: ensure full index
stash: ensure full index
rm: ensure full index
merge-index: ensure full index
ls-files: ensure full index
grep: ensure full index
fsck: ensure full index
difftool: ensure full index
commit: ensure full index
checkout: ensure full index
...
Several methods specify that they take a 'struct index_state' pointer
with the 'const' qualifier because they intend to only query the data,
not change it. However, we will be introducing a step very low in the
method stack that might modify a sparse-index to become a full index in
the case that our queries venture inside a sparse-directory entry.
This change only removes the 'const' qualifiers that are necessary for
the following change which will actually modify the implementation of
index_name_stage_pos().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a number of callers of add_patterns() and its sibling
functions. Let's give them a "flags" parameter for adding new options
without having to touch each caller. We'll use this in a future patch to
add O_NOFOLLOW support. But for now each caller just passes 0.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future feature will want to load the sparse-checkout patterns into a
pattern_list, but the current mechanism to do so is a bit complicated.
This is made difficult due to needing to find the sparse-checkout file
in different ways throughout the codebase.
The logic implemented in the new get_sparse_checkout_patterns() was
duplicated in populate_from_existing_patterns() in unpack-trees.c. Use
the new method instead, keeping the logic around handling the struct
unpack_trees_options.
The callers to get_sparse_checkout_filename() in
builtin/sparse-checkout.c manipulate the sparse-checkout file directly,
so it is not appropriate to replace logic in that file with
get_sparse_checkout_patterns().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The dir structure seemed to have a number of leaks and problems around
it. First I noticed that parent_hashmap and recursive_hashmap were
being leaked (though Peff noticed and submitted fixes before me). Then
I noticed in the previous commit that clear_directory() was only taking
responsibility for a subset of fields within dir_struct, despite the
fact that entries[] and ignored[] we allocated internally to dir.c.
That, of course, resulted in many callers either leaking or haphazardly
trying to free these arrays and their contents.
Digging further, I found that despite the pretty clear documentation
near the top of dir.h that folks were supposed to call clear_directory()
when the user no longer needed the dir_struct, there were four callers
that didn't bother doing that at all. However, two of them clearly
thought about leaks since they had an UNLEAK(dir) directive, which to me
suggests that the method to free the data was too unclear. I suspect
the non-obviousness of the API and its holes led folks to avoid it,
which then snowballed into further problems with the entries[],
ignored[], parent_hashmap, and recursive_hashmap problems.
Rename clear_directory() to dir_clear() to be more in line with other
data structures in git, and introduce a dir_init() to handle the
suggested memsetting of dir_struct to all zeroes. I hope that a name
like "dir_clear()" is more clear, and that the presence of dir_init()
will provide a hint to those looking at the code that they need to look
for either a dir_clear() or a dir_free() and lead them to find
dir_clear().
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The calling convention for the dir API is supposed to end with a call to
clear_directory() to free up no longer needed memory. However,
clear_directory() didn't free dir->entries or dir->ignored. I believe
this was an oversight, but a number of callers noticed memory leaks and
started free'ing these. Unfortunately, they did so somewhat haphazardly
(sometimes freeing the entries in the arrays, and sometimes only
free'ing the arrays themselves). This suggests the callers weren't
trying to make sure any possible memory used might be free'd, but just
the memory they noticed their usecase definitely had allocated.
Fix this mess by moving all the duplicated free'ing logic into
clear_directory(). End by resetting dir to a pristine state so it could
be reused if desired.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Management of sparsely checked-out working tree has gained a
dedicated "sparse-checkout" command.
* ds/sparse-cone: (21 commits)
sparse-checkout: improve OS ls compatibility
sparse-checkout: respect core.ignoreCase in cone mode
sparse-checkout: check for dirty status
sparse-checkout: update working directory in-process for 'init'
sparse-checkout: cone mode should not interact with .gitignore
sparse-checkout: write using lockfile
sparse-checkout: use in-process update for disable subcommand
sparse-checkout: update working directory in-process
sparse-checkout: sanitize for nested folders
unpack-trees: add progress to clear_ce_flags()
unpack-trees: hash less in cone mode
sparse-checkout: init and set in cone mode
sparse-checkout: use hashmaps for cone patterns
sparse-checkout: add 'cone' mode
trace2: add region in clear_ce_flags
sparse-checkout: create 'disable' subcommand
sparse-checkout: add '--stdin' option to set subcommand
sparse-checkout: 'set' subcommand
clone: add --sparse mode
sparse-checkout: create 'init' subcommand
...
The sparse-checkout feature in "cone mode" can use the fact that
the recursive patterns are "connected" to the root via parent
patterns to decide if a directory is entirely contained in the
sparse-checkout or entirely removed.
In these cases, we can skip hashing the paths within those
directories and simply set the skipworktree bit to the correct
value.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make the cone pattern set easy to use, update the behavior of
'git sparse-checkout (init|set)'.
Add '--cone' flag to 'git sparse-checkout init' to set the config
option 'core.sparseCheckoutCone=true'.
When running 'git sparse-checkout set' in cone mode, a user only
needs to supply a list of recursive folder matches. Git will
automatically add the necessary parent matches for the leading
directories.
When testing 'git sparse-checkout set' in cone mode, check the
error stream to ensure we do not see any errors. Specifically,
we want to avoid the warning that the patterns do not match
the cone-mode patterns.
Helped-by: Eric Wong <e@80x24.org>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parent and recursive patterns allowed by the "cone mode"
option in sparse-checkout are restrictive enough that we
can avoid using the regex parsing. Everything is based on
prefix matches, so we can use hashsets to store the prefixes
from the sparse-checkout file. When checking a path, we can
strip path entries from the path and check the hashset for
an exact match.
As a test, I created a cone-mode sparse-checkout file for the
Linux repository that actually includes every file. This was
constructed by taking every folder in the Linux repo and creating
the pattern pairs here:
/$folder/
!/$folder/*/
This resulted in a sparse-checkout file sith 8,296 patterns.
Running 'git read-tree -mu HEAD' on this file had the following
performance:
core.sparseCheckout=false: 0.21 s (0.00 s)
core.sparseCheckout=true: 3.75 s (3.50 s)
core.sparseCheckoutCone=true: 0.23 s (0.01 s)
The times in parentheses above correspond to the time spent
in the first clear_ce_flags() call, according to the trace2
performance traces.
While this example is contrived, it demonstrates how these
patterns can slow the sparse-checkout feature.
Helped-by: Eric Wong <e@80x24.org>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the documentation from Documentation/technical/api-directory-listing.txt
to dir.h as it's easier for the developers to find the usage information
beside the code instead of looking for it in another doc file.
Also documentation/technical/api-directory-listing.txt is removed because
the information it has is now redundant and it'll be hard to keep it up to
date and synchronized with the documentation in the header files.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clean" fixes.
* en/clean-nested-with-ignored:
dir: special case check for the possibility that pathspec is NULL
clean: fix theoretical path corruption
clean: rewrap overly long line
clean: avoid removing untracked files in a nested git repository
clean: disambiguate the definition of -d
git-clean.txt: do not claim we will delete files with -n/--dry-run
dir: add commentary explaining match_pathspec_item's return value
dir: if our pathspec might match files under a dir, recurse into it
dir: make the DO_MATCH_SUBMODULE code reusable for a non-submodule case
dir: also check directories for matching pathspecs
dir: fix off-by-one error in match_pathspec_item
dir: fix typo in comment
t7300: add testcases showing failure to clean specified pathspecs
Users expect files in a nested git repository to be left alone unless
sufficiently forced (with two -f's). Unfortunately, in certain
circumstances, git would delete both tracked (and possibly dirty) files
and untracked files within a nested repository. To explain how this
happens, let's contrast a couple cases. First, take the following
example setup (which assumes we are already within a git repo):
git init nested
cd nested
>tracked
git add tracked
git commit -m init
>untracked
cd ..
In this setup, everything works as expected; running 'git clean -fd'
will result in fill_directory() returning the following paths:
nested/
nested/tracked
nested/untracked
and then correct_untracked_entries() would notice this can be compressed
to
nested/
and then since "nested/" is a directory, we would call
remove_dirs("nested/", ...), which would
check is_nonbare_repository_dir() and then decide to skip it.
However, if someone also creates an ignored file:
>nested/ignored
then running 'git clean -fd' would result in fill_directory() returning
the same paths:
nested/
nested/tracked
nested/untracked
but correct_untracked_entries() will notice that we had ignored entries
under nested/ and thus simplify this list to
nested/tracked
nested/untracked
Since these are not directories, we do not call remove_dirs() which was
the only place that had the is_nonbare_repository_dir() safety check --
resulting in us deleting both the untracked file and the tracked (and
possibly dirty) file.
One possible fix for this issue would be walking the parent directories
of each path and checking if they represent nonbare repositories, but
that would be wasteful. Even if we added caching of some sort, it's
still a waste because we should have been able to check that "nested/"
represented a nonbare repository before even descending into it in the
first place. Add a DIR_SKIP_NESTED_GIT flag to dir_struct.flags and use
it to prevent fill_directory() and friends from descending into nested
git repos.
With this change, we also modify two regression tests added in commit
91479b9c72 ("t7300: add tests to document behavior of clean and nested
git", 2015-06-15). That commit, nor its series, nor the six previous
iterations of that series on the mailing list discussed why those tests
coded the expectation they did. In fact, it appears their purpose was
simply to test _existing_ behavior to make sure that the performance
changes didn't change the behavior. However, these two tests directly
contradicted the manpage's claims that two -f's were required to delete
files/directories under a nested git repository. While one could argue
that the user gave an explicit path which matched files/directories that
were within a nested repository, there's a slippery slope that becomes
very difficult for users to understand once you go down that route (e.g.
what if they specified "git clean -f -d '*.c'"?) It would also be hard
to explain what the exact behavior was; avoid such problems by making it
really simple.
Also, clean up some grammar errors describing this functionality in the
git-clean manpage.
Finally, there are still a couple bugs with -ffd not cleaning out enough
(e.g. missing the nested .git) and with -ffdX possibly cleaning out the
wrong files (paying attention to outer .gitignore instead of inner).
This patch does not address these cases at all (and does not change the
behavior relative to those flags), it only fixes the handling when given
a single -f. See
https://public-inbox.org/git/20190905212043.GC32087@szeder.dev/ for more
discussion of the -ffd[X?] bugs.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For git clean, if a directory is entirely untracked and the user did not
specify -d (corresponding to DIR_SHOW_IGNORED_TOO), then we usually do
not want to remove that directory and thus do not recurse into it.
However, if the user manually specified specific (or even globbed) paths
somewhere under that directory to remove, then we need to recurse into
the directory to make sure we remove the relevant paths under that
directory as the user requested.
Note that this does not mean that the recursed-into directory will be
added to dir->entries for later removal; as of a few commits earlier in
this series, there is another more strict match check that is run after
returning from a recursed-into directory before deciding to add it to the
list of entries. Therefore, this will only result in files underneath
the given directory which match one of the pathspecs being added to the
entries list.
Two notes of potential interest to future readers:
* If we wanted to only recurse into a directory when it is specifically
matched rather than matched-via-glob (e.g. '*.c'), then we could do
so via making the final non-zero return in match_pathspec_item be
MATCHED_RECURSIVELY instead of MATCHED_RECURSIVELY_LEADING_PATHSPEC.
(Note that the relative order of MATCHED_RECURSIVELY_LEADING_PATHSPEC
and MATCHED_RECURSIVELY are important for such a change.) I was
leaving open that possibility while writing an RFC asking for the
behavior we want, but even though we don't want it, that knowledge
might help you understand the code flow better.
* There is a growing amount of logic in read_directory_recursive() for
deciding whether to recurse into a subdirectory. However, there is a
comment immediately preceding this logic that says to recurse if
instructed by treat_path(). It may be better for the logic in
read_directory_recursive() to ultimately be moved to treat_path() (or
another function it calls, such as treat_directory()), but I have
left that for someone else to tackle in the future.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first consumer of pattern-matching filenames was the
.gitignore feature. In that context, storing a list of patterns
as a 'struct exclude_list' makes sense. However, the
sparse-checkout feature then adopted these structures and methods,
but with the opposite meaning: these patterns match the files
that should be included!
Now that this library is renamed to use 'struct pattern_list'
and 'struct pattern', we can now rename the method used by
the sparse-checkout feature to determine which paths should
appear in the working directory.
The method is_excluded_from_list() is only used by the
sparse-checkout logic in unpack-trees and list-objects-filter.
The confusing part is that it returned 1 for "excluded" (i.e.
it matches the list of exclusions) but that really manes that
the path matched the list of patterns for _inclusion_ in the
working directory.
Rename the method to be path_matches_pattern_list() and have
it return an explicit 'enum pattern_match_result'. Here, the
values MATCHED = 1, UNMATCHED = 0, and UNDECIDED = -1 agree
with the previous integer values. This shift allows future
consumers to better understand what the retur values mean,
and provides more type checking for handling those values.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first consumer of pattern-matching filenames was the
.gitignore feature. In that context, storing a list of patterns
as a 'struct exclude_list' makes sense. However, the
sparse-checkout feature then adopted these structures and methods,
but with the opposite meaning: these patterns match the files
that should be included!
It would be clearer to rename this entire library as a "pattern
matching" library, and the callers apply exclusion/inclusion
logic accordingly based on their needs.
This commit renames several methods defined in dir.h to make
more sense with the renamed 'struct exclude_list' to 'struct
pattern_list' and 'struct exclude' to 'struct path_pattern':
* last_exclude_matching() -> last_matching_pattern()
* parse_exclude() -> parse_path_pattern()
In addition, the word 'exclude' was replaced with 'pattern'
in the methods below:
* add_exclude_list()
* add_excludes_from_file_to_list()
* add_excludes_from_file()
* add_excludes_from_blob_to_list()
* add_exclude()
* clear_exclude_list()
A few methods with the word "exclude" remain. These will
be handled seperately. In particular, the method
"is_excluded()" is concretely about the .gitignore file
relative to a specific directory. This is the important
boundary between library and consumer: is_excluded() cares
about .gitignore, but is_excluded() calls
last_matching_pattern() to make that decision.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first consumer of pattern-matching filenames was the
.gitignore feature. In that context, storing a list of patterns
as a 'struct exclude_list' makes sense. However, the
sparse-checkout feature then adopted these structures and methods,
but with the opposite meaning: these patterns match the files
that should be included!
It would be clearer to rename this entire library as a "pattern
matching" library, and the callers apply exclusion/inclusion
logic accordingly based on their needs.
This commit replaces 'EXCL_FLAG_' to 'PATTERN_FLAG_' in the
names of the flags used on 'struct path_pattern'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first consumer of pattern-matching filenames was the
.gitignore feature. In that context, storing a list of patterns
as a 'struct exclude_list' makes sense. However, the
sparse-checkout feature then adopted these structures and methods,
but with the opposite meaning: these patterns match the files
that should be included!
It would be clearer to rename this entire library as a "pattern
matching" library, and the callers apply exclusion/inclusion
logic accordingly based on their needs.
This commit renames 'struct exclude_list' to 'struct pattern_list'
and renames several variables called 'el' to 'pl'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first consumer of pattern-matching filenames was the
.gitignore feature. In that context, storing a list of patterns
as a list of 'struct exclude' items makes sense. However, the
sparse-checkout feature then adopted these structures and methods,
but with the opposite meaning: these patterns match the files
that should be included!
It would be clearer to rename this entire library as a "pattern
matching" library, and the callers apply exclusion/inclusion
logic accordingly based on their needs.
This commit renames 'struct exclude' to 'struct path_pattern'
and renames several variable names to match. 'struct pattern'
was already taken by attr.c, and this more completely describes
that the patterns are specific to file paths.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mechanically and systematically drop "extern" from function
declarlation.
* dl/no-extern-in-func-decl:
*.[ch]: manually align parameter lists
*.[ch]: remove extern from function declarations using sed
*.[ch]: remove extern from function declarations using spatch
Further code clean-up to allow the lowest level of name-to-object
mapping layer to work with a passed-in repository other than the
default one.
* nd/sha1-name-c-wo-the-repository: (34 commits)
sha1-name.c: remove the_repo from get_oid_mb()
sha1-name.c: remove the_repo from other get_oid_*
sha1-name.c: remove the_repo from maybe_die_on_misspelt_object_name
submodule-config.c: use repo_get_oid for reading .gitmodules
sha1-name.c: add repo_get_oid()
sha1-name.c: remove the_repo from get_oid_with_context_1()
sha1-name.c: remove the_repo from resolve_relative_path()
sha1-name.c: remove the_repo from diagnose_invalid_index_path()
sha1-name.c: remove the_repo from handle_one_ref()
sha1-name.c: remove the_repo from get_oid_1()
sha1-name.c: remove the_repo from get_oid_basic()
sha1-name.c: remove the_repo from get_describe_name()
sha1-name.c: remove the_repo from get_oid_oneline()
sha1-name.c: add repo_interpret_branch_name()
sha1-name.c: remove the_repo from interpret_branch_mark()
sha1-name.c: remove the_repo from interpret_nth_prior_checkout()
sha1-name.c: remove the_repo from get_short_oid()
sha1-name.c: add repo_for_each_abbrev()
sha1-name.c: store and use repo in struct disambiguate_state
sha1-name.c: add repo_find_unique_abbrev_r()
...
In previous patches, extern was mechanically removed from function
declarations without care to formatting, causing parameter lists to be
misaligned. Manually format changed sections such that the parameter
lists should be realigned.
Viewing this patch with 'git diff -w' should produce no output.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There has been a push to remove extern from function declarations.
Remove some instances of "extern" for function declarations which are
caught by Coccinelle. Note that Coccinelle has some difficulty with
processing functions with `__attribute__` or varargs so some `extern`
declarations are left behind to be dealt with in a future patch.
This was the Coccinelle patch used:
@@
type T;
identifier f;
@@
- extern
T f(...);
and it was run with:
$ git ls-files \*.{c,h} |
grep -v ^compat/ |
xargs spatch --sp-file contrib/coccinelle/noextern.cocci --in-place
Files under `compat/` are intentionally excluded as some are directly
copied from external sources and we should avoid churning them as much
as possible.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This hasn't been used since 17ddc66e70 (convert report_path_error to
take struct pathspec, 2013-07-14), as the names in the struct will have
already been prefixed when they were parsed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the match_patchspec API and friends take an index_state instead
of assuming the_index in dir.c. All external call sites are converted
blindly to keep the patch simple and retain current behavior.
Individual call sites may receive further updates to use the right
index instead of the_index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (42 commits)
merge-one-file: compute empty blob object ID
add--interactive: compute the empty tree value
Update shell scripts to compute empty tree object ID
sha1_file: only expose empty object constants through git_hash_algo
dir: use the_hash_algo for empty blob object ID
sequencer: use the_hash_algo for empty tree object ID
cache-tree: use is_empty_tree_oid
sha1_file: convert cached object code to struct object_id
builtin/reset: convert use of EMPTY_TREE_SHA1_BIN
builtin/receive-pack: convert one use of EMPTY_TREE_SHA1_HEX
wt-status: convert two uses of EMPTY_TREE_SHA1_HEX
submodule: convert several uses of EMPTY_TREE_SHA1_HEX
sequencer: convert one use of EMPTY_TREE_SHA1_HEX
merge: convert empty tree constant to the_hash_algo
builtin/merge: switch tree functions to use object_id
builtin/am: convert uses of EMPTY_TREE_SHA1_BIN to the_hash_algo
sha1-file: add functions for hex empty tree and blob OIDs
builtin/receive-pack: avoid hard-coded constants for push certs
diff: specify abbreviation size in terms of the_hash_algo
upload-pack: replace use of several hard-coded constants
...
Moving a submodule that itself has submodule in it with "git mv"
forgot to make necessary adjustment to the nested sub-submodules;
now the codepath learned to recurse into the submodules.
* sb/submodule-move-nested:
submodule: fixup nested submodules after moving the submodule
submodule-config: remove submodule_from_cache
submodule-config: add repository argument to submodule_from_{name, path}
submodule-config: allow submodule_free to handle arbitrary repositories
grep: remove "repo" arg from non-supporting funcs
submodule.h: drop declaration of connect_work_tree_and_git_dir
Convert the exclude_sha1 member of struct untracked_cache_dir and rename
it to exclude_oid. Eliminate several hard-coded integral constants, and
update a function name that referred to SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
connect_work_tree_and_git_dir is used to connect a submodule worktree with
its git directory and vice versa after events that require a reconnection
such as moving around the working tree. As submodules can have nested
submodules themselves, we'd also want to fix the nested submodules when
asked to. Add an option to recurse into the nested submodules and connect
them as well.
As submodules are identified by their name (which determines their git
directory in relation to their superproject's git directory) internally
and by their path in the working tree of the superproject, we need to
make sure that the mapping of name <-> path is kept intact. We can do
that in the git-mv command by writing out the gitmodules file first
and then forcing a reload of the submodule config machinery.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some bugs around "untracked cache" feature have been fixed.
* nd/fix-untracked-cache-invalidation:
dir.c: ignore paths containing .git when invalidating untracked cache
dir.c: stop ignoring opendir() error in open_cached_dir()
dir.c: fix missing dir invalidation in untracked code
dir.c: avoid stat() in valid_cached_dir()
status: add a failing test showing a core.untrackedCache bug
read_directory() code ignores all paths named ".git" even if it's not
a valid git repository. See treat_path() for details. Since ".git" is
basically invisible to read_directory(), when we are asked to
invalidate a path that contains ".git", we can safely ignore it
because the slow path would not consider it anyway.
This helps when fsmonitor is used and we have a real ".git" repo at
worktree top. Occasionally .git/index will be updated and if the
fsmonitor hook does not filter it, untracked cache is asked to
invalidate the path ".git/index".
Without this patch, we invalidate the root directory unncessarily,
which:
- makes read_directory() fall back to slow path for root directory
(slower)
- makes the index dirty (because UNTR extension is updated). Depending
on the index size, writing it down could also be slow.
A note about the new "safe_path" knob. Since this new check could be
relatively expensive, avoid it when we know it's not needed. If the
path comes from the index, it can't contain ".git". If it does
contain, we may be screwed up at many more levels, not just this one.
Noticed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the declaration of struct sha1_stat. Adjust all usages of this
struct and replace hash{clr,cmp,cpy} with oid{clr,cmp,cpy} wherever
possible. Rename it to struct oid_stat.
Rename static function load_sha1_stat to load_oid_stat.
Remove macro EMPTY_BLOB_SHA1_BIN, as it's no longer used.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for implementing narrow/partial clone, the object
walking machinery has been taught a way to tell it to "filter" some
objects from enumeration.
* jh/object-filtering:
rev-list: support --no-filter argument
list-objects-filter-options: support --no-filter
list-objects-filter-options: fix 'keword' typo in comment
pack-objects: add list-objects filtering
rev-list: add list-objects filtering support
list-objects: filter objects in traverse_commit_list
oidset: add iterator methods to oidset
oidmap: add oidmap iterator methods
dir: allow exclusions from blob in addition to file
Refactor add_excludes() to separate the reading of the
exclude file into a buffer and the parsing of the buffer
into exclude_list items.
Add add_excludes_from_blob_to_list() to allow an exclude
file be specified with an OID without assuming a local
worktree or index exists.
Refactor read_skip_worktree_file_from_index() and add
do_read_blob() to eliminate duplication of preliminary
processing of blob contents.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We learned to talk to watchman to speed up "git status" and other
operations that need to see which paths have been modified.
* bp/fsmonitor:
fsmonitor: preserve utf8 filenames in fsmonitor-watchman log
fsmonitor: read entirety of watchman output
fsmonitor: MINGW support for watchman integration
fsmonitor: add a performance test
fsmonitor: add a sample integration script for Watchman
fsmonitor: add test cases for fsmonitor extension
split-index: disable the fsmonitor extension when running the split index test
fsmonitor: add a test tool to dump the index extension
update-index: add fsmonitor support to update-index
ls-files: Add support in ls-files to display the fsmonitor valid bit
fsmonitor: add documentation for the fsmonitor extension.
fsmonitor: teach git to optionally utilize a file system monitor to speed up detecting new or changed files.
update-index: add a new --force-write-index option
preload-index: add override to enable testing preload-index
bswap: add 64 bit endianness helper get_be64
Teach the status command more flexibility in how ignored files are
reported. Currently, the reporting of ignored files and untracked
files are linked. You cannot control how ignored files are reported
independently of how untracked files are reported (i.e. `all` vs
`normal`). This makes it impossible to show untracked files with the
`all` option, but show ignored files with the `normal` option.
This work 1) adds the ability to control the reporting of ignored
files independently of untracked files and 2) introduces the concept
of status reporting ignored paths that explicitly match an ignored
pattern. There are 2 benefits to these changes: 1) if a consumer needs
all untracked files but not all ignored files, there is a performance
benefit to not scanning all contents of an ignored directory and 2)
returning ignored files that explicitly match a path allow a consumer
to make more informed decisions about when a status result might be
stale.
This commit implements --ignored=matching with --untracked-files=all.
The following commit will implement --ignored=matching with
--untracked=files=normal.
As an example of where this flexibility could be useful is that our
application (Visual Studio) runs the status command and presents the
output. It shows all untracked files individually (e.g. using the
'--untracked-files==all' option), and would like to know about which
paths are ignored. It uses information about ignored paths to make
decisions about when the status result might have changed.
Additionally, many projects place build output into directories inside
a repository's working directory (e.g. in "bin/" and "obj/"
directories). Normal usage is to explicitly ignore these 2 directory
names in the .gitignore file (rather than or in addition to the *.obj
pattern).If an application could know that these directories are
explicitly ignored, it could infer that all contents are ignored as
well and make better informed decisions about files in these
directories. It could infer that any changes under these paths would
not affect the output of status. Additionally, there can be a
significant performance benefit by avoiding scanning through ignored
directories.
When status is set to report matching ignored files, it has the
following behavior. Ignored files and directories that explicitly
match an exclude pattern are reported. If an ignored directory matches
an exclude pattern, then the path of the directory is returned. If a
directory does not match an exclude pattern, but all of its contents
are ignored, then the contained files are reported instead of the
directory.
Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the index is read from disk, the fsmonitor index extension is used
to flag the last known potentially dirty index entries. The registered
core.fsmonitor command is called with the time the index was last
updated and returns the list of files changed since that time. This list
is used to flag any additional dirty cache entries and untracked cache
directories.
We can then use this valid state to speed up preload_index(),
ie_match_stat(), and refresh_cache_ent() as they do not need to lstat()
files to detect potential changes for those entries marked
CE_FSMONITOR_VALID.
In addition, if the untracked cache is turned on valid_cached_dir() can
skip checking directories for new or changed files as fsmonitor will
invalidate the cache only for those directories that have been
identified as having potential changes.
To keep the CE_FSMONITOR_VALID state accurate during git operations;
when git updates a cache entry to match the current state on disk,
it will now set the CE_FSMONITOR_VALID bit.
Inversely, anytime git changes a cache entry, the CE_FSMONITOR_VALID bit
is cleared and the corresponding untracked cache directory is marked
invalid.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar functions exist in apply.c and builtin/show-branch.c for
counting the number of slashes in a string. Also in the later
patches, we introduce a third caller for the same. Hence, we unify
it now by cleaning the existing functions and declaring a common
function count_slashes in dir.h and implementing it in dir.c to
remove this code duplication.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clean -d" used to clean directories that has ignored files,
even though the command should not lose ignored ones without "-x".
"git status --ignored" did not list ignored and untracked files
without "-uall". These have been corrected.
* sl/clean-d-ignored-fix:
clean: teach clean -d to preserve ignored paths
dir: expose cmp_name() and check_contains()
dir: hide untracked contents of untracked dirs
dir: recurse into untracked dirs for ignored files
t7061: status --ignored should search untracked dirs
t7300: clean -d should skip dirs with ignored files
We want to use cmp_name() and check_contains() (which both compare
`struct dir_entry`s, the former in terms of the sort order, the latter
in terms of whether one lexically contains another) outside of dir.c,
so we have to (1) change their linkage and (2) rename them as
appropriate for the global namespace. The second is achieved by
renaming cmp_name() to cmp_dir_entry() and check_contains() to
check_dir_entry_contains().
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we taught read_directory_recursive() to recurse into untracked
directories in search of ignored files given DIR_SHOW_IGNORED_TOO, that
had the side effect of teaching it to collect the untracked contents of
untracked directories. It doesn't always make sense to return these,
though (we do need them for `clean -d`), so we introduce a flag
(DIR_KEEP_UNTRACKED_CONTENTS) to control whether or not read_directory()
strips dir->entries of the untracked contents of untracked dirs.
We also introduce check_contains() to check if one dir_entry corresponds
to a path which contains the path corresponding to another dir_entry.
This also fixes known breakages in t7061, since status --ignored now
searches untracked directories for ignored files.
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
