"git stash push <pathspec>" did not work from a subdirectory at all.
Bugfix for a topic in v2.13
* ps/stash-push-pathspec-fix:
git-stash: fix pushing stash with pathspec from subdir
The result from "git diff" that compares two blobs, e.g. "git diff
$commit1:$path $commit2:$path", used to be shown with the full
object name as given on the command line, but it is more natural to
use the $path in the output and use it to look up .gitattributes.
* jk/diff-blob:
diff: use blob path for blob/file diffs
diff: use pending "path" if it is available
diff: use the word "path" instead of "name" for blobs
diff: pass whole pending entry in blobinfo
handle_revision_arg: record paths for pending objects
handle_revision_arg: record modes for "a..b" endpoints
t4063: add tests of direct blob diffs
get_sha1_with_context: dynamically allocate oc->path
get_sha1_with_context: always initialize oc->symlink_path
sha1_name: consistently refer to object_context as "oc"
handle_revision_arg: add handle_dotdot() helper
handle_revision_arg: hoist ".." check out of range parsing
handle_revision_arg: stop using "dotdot" as a generic pointer
handle_revision_arg: simplify commit reference lookups
handle_revision_arg: reset "dotdot" consistently
"git describe --contains" penalized light-weight tags so much that
they were almost never considered. Instead, give them about the
same chance to be considered as an annotated tag that is the same
age as the underlying commit would.
* jc/name-rev-lw-tag:
name-rev: favor describing with tags and use committer date to tiebreak
name-rev: refactor logic to see if a new candidate is a better name
perf-test update.
* jh/memihash-opt:
p0004: don't error out if test repo is too small
p0004: don't abort if multi-threaded is too slow
p0004: use test_perf
p0004: avoid using pipes
p0004: simplify calls of test-lazy-init-name-hash
"git pull --rebase --autostash" didn't auto-stash when the local history
fast-forwards to the upstream.
* tb/pull-ff-rebase-autostash:
pull: ff --rebase --autostash works in dirty repo
"git clean -d" used to clean directories that has ignored files,
even though the command should not lose ignored ones without "-x".
"git status --ignored" did not list ignored and untracked files
without "-uall". These have been corrected.
* sl/clean-d-ignored-fix:
clean: teach clean -d to preserve ignored paths
dir: expose cmp_name() and check_contains()
dir: hide untracked contents of untracked dirs
dir: recurse into untracked dirs for ignored files
t7061: status --ignored should search untracked dirs
t7300: clean -d should skip dirs with ignored files
A recent update to t5545-push-options.sh started skipping all the
tests in the script when a web server testing is disabled or
unavailable, not just the ones that require a web server. Non HTTP
tests have been salvaged to always run in this script.
* jc/skip-test-in-the-middle:
t5545: enhance test coverage when no http server is installed
test: allow skipping the remainder
The "run-command" API implementation has been made more robust
against dead-locking in a threaded environment.
* bw/forking-and-threading:
usage.c: drop set_error_handle()
run-command: restrict PATH search to executable files
run-command: expose is_executable function
run-command: block signals between fork and execve
run-command: add note about forking and threading
run-command: handle dup2 and close errors in child
run-command: eliminate calls to error handling functions in child
run-command: don't die in child when duping /dev/null
run-command: prepare child environment before forking
string-list: add string_list_remove function
run-command: use the async-signal-safe execv instead of execvp
run-command: prepare command before forking
t0061: run_command executes scripts without a #! line
t5550: use write_script to generate post-update hook
Introduce the BUG() macro to improve die("BUG: ...").
* jk/bug-to-abort:
usage: add NORETURN to BUG() function definitions
config: complain about --local outside of a git repo
setup_git_env: convert die("BUG") to BUG()
usage.c: add BUG() function
"git checkout --recurse-submodules" did not quite work with a
submodule that itself has submodules.
* sb/checkout-recurse-submodules:
submodule: properly recurse for read-tree and checkout
submodule: avoid auto-discovery in new working tree manipulator code
submodule_move_head: reuse child_process structure for futher commands
The `git stash push` command recently gained the ability to get a
pathspec as its argument to only stash matching files. Calling this
command from a subdirectory does not work, though, as one of the first
things we do is changing to the top level directory without keeping
track of the prefix from which the command is being run.
Fix the shortcoming by storing the prefix previous to the call to
`cd_to_toplevel` and then subsequently using `git rev-parse --prefix` to
correctly resolve the pathspec. Add a test to catch future breakage of
this usecase.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test for the case when only one parameter is passed to '-m'
(move/rename) option.
For example - if 'git branch -m bbb' is run while checked out on aaa
branch, it should rename the currently checked out branch to bbb.
There was no test for this particular case with only one parameter
for -m option. However, there's one similar test case for -M option.
Add test for making sure HEAD points to the bbb (new branch name). Also
add a test for making sure the reflog that is moved to 'bbb' retains
entries created for the currently checked out branch. Note that since
the topmost entry on reflog for bbb will be about branch creation, we
compare bbb@{1} (instead of bbb@{0}) with aaa@{0} to make sure the
reflog for bbb retains entries from aaa.
Signed-off-by: Sahil Dua <sahildua2305@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add some more simple mailinfo tests including a few that
produce:
fatal: `pos + len' is too far after the end of the buffer
Mark those as 'test_expect_failure'.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a1283866b (t5313: test bounds-checks of
corrupted/malicious pack/idx files, 2016-02-25) added a test
that requires our corrupted pack index to have two objects.
The entry for the first one remains untouched, but we
corrupt the entry for second one. Since the index stores the
entries in sha1-sorted order, this means that the test must
make sure that the sha1 of the object we expect to be
corrupted ("$object") sorts after the other placeholder
object.
That commit used the HEAD commit as the placeholder, but the
script never calls test_tick. That means that the commit
object (and thus its sha1) depends on the timestamp when the
test script is run. This usually works in practice, because
the sha1 of $object starts with "fff". The commit object
will sort after that only 1 in 4096 times, but when it does
the test will fail.
One obvious solution is to add the test_tick call to get a
deterministic commit sha1. But since we're relying on the
sort order for the test to function, let's make that very
explicit by just generating a second blob with a known sha1.
Reported-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test allowed both "git push" and "git receive-pack" on the other
end write their traces into the same file. This is OK on platforms
that allows atomically appending to a file opened with O_APPEND,
but on other platforms led to a mangled output, causing
intermittent test failures. This has been fixed by disabling
traces from "receive-pack" in the test.
* jk/alternate-ref-optim:
t5400: avoid concurrent writes into a trace file
"git interpret-trailers", when used as GIT_EDITOR for "git commit
-v", looked for and appended to a trailer block at the very end,
i.e. at the end of the "diff" output. The command has been
corrected to pay attention to the cut-mark line "commit -v" adds to
the buffer---the real trailer block should appear just before it.
* bm/interpret-trailers-cut-line-is-eom:
interpret-trailers: honor the cut line
"git clone --config var=val" is a way to populate the
per-repository configuration file of the new repository, but it did
not work well when val is an empty string. This has been fixed.
* jn/clone-add-empty-config-from-command-line:
clone: handle empty config values in -c
"git cherry-pick" and other uses of the sequencer machinery
mishandled a trailer block whose last line is an incomplete line.
This has been fixed so that an additional sign-off etc. are added
after completing the existing incomplete line.
* jt/use-trailer-api-in-commands:
sequencer: add newline before adding footers
The receive-pack program now makes sure that the push certificate
records the same set of push options used for pushing.
* jt/push-options-doc:
receive-pack: verify push options in cert
docs: correct receive.advertisePushOptions default
Make sure our tests would pass when the sources are checked out
with "platform native" line ending convention by default on
Windows. Some "text" files out tests use and the test scripts
themselves that are meant to be run with /bin/sh, ought to be
checked out with eol=LF even on Windows.
* js/eol-on-ourselves:
t4051: mark supporting files as requiring LF-only line endings
Fix the remaining tests that failed with core.autocrlf=true
t3901: move supporting files into t/t3901/
completion: mark bash script as LF-only
git-new-workdir: mark script as LF-only
Fix build with core.autocrlf=true
Tag objects, which are not reachable from any ref, that point at
missing objects were mishandled by "git gc" and friends (they
should silently be ignored instead)
* jk/ignore-broken-tags-when-ignoring-missing-links:
revision.c: ignore broken tags with ignore_missing_links
"pack-objects" can stream a slice of an existing packfile out when
the pack bitmap can tell that the reachable objects are all needed
in the output, without inspecting individual objects. This
strategy however would not work well when "--local" and other
options are in use, and need to be disabled.
* jk/disable-pack-reuse-when-broken:
t5310: fix "; do" style
pack-objects: disable pack reuse for object-selection options
Setting "log.decorate=false" in the configuration file did not take
effect in v2.13, which has been corrected.
* ah/log-decorate-default-to-auto:
builtin/log: honor log.decorate
Update tests to pass under GETTEXT_POISON (a mechanism to ensure
that output strings that should not be translated are not
translated by mistake), and tell TravisCI to run them.
* ab/fix-poison-tests:
travis-ci: add job to run tests with GETTEXT_POISON
travis-ci: setup "prove cache" in "script" step
tests: fix tests broken under GETTEXT_POISON=YesPlease
The Web interface to gmane news archive is long gone, even though
the articles are still accessible via NTTP. Replace the links with
ones to public-inbox.org. Because their message identification is
based on the actual message-id, it is likely that it will be easier
to migrate away from it if/when necessary.
* ab/doc-replace-gmane-links:
doc: replace more gmane links
doc: replace a couple of broken gmane links
When `git pull --rebase --autostash` in a dirty repository resulted in a
fast-forward, nothing was being autostashed and the pull failed. This
was due to a shortcut to avoid running rebase when we can fast-forward,
but autostash is ignored on that codepath.
Now we will only take the shortcut if autostash is not in effect.
Based on a few tests against the git.git repo, the shortcut does not
seem to give us significant performance benefits, on Linux at least.
Regardless, it is more important to be correct than to be fast.
Signed-off-by: Tyler Brazier <tyler@tylerbrazier.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes the test by changing "branch.s/s/dummy" to "branch.s/s.dummy" which is
the right way of accessing config key "branch.s/s.dummy". Purpose of
this test is to confirm that this key doesn't exist after the branch
"s/s" has been renamed to "s".
Earlier it was trying to access invalid config key and hence was getting
an error. However, this wasn't caught because we were expecting the
command to fail for other reason as mentioned above.
Signed-off-by: Sahil Dua <sahildua2305@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a test line that's exactly the same as the preceding
line.
This was brought in in commit feabcc173b ("Integrate wildmatch to
git", 2012-10-15), these tests are originally copied from rsync.git,
but the duplicate line was never present there, so must have just
snuck in during integration with git by accident.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we diff a blob against a working tree file like:
git diff HEAD:Makefile Makefile
we always use the working tree filename for both sides of
the diff. In most cases that's fine, as the two would be the
same anyway, as above. And until recently, we used the
"name" for the blob, not the path, which would have the
messy "HEAD:" on the beginning.
But when they don't match, like:
git diff HEAD:old_path new_path
it makes sense to show both names.
This patch uses the blob's path field if it's available, and
otherwise falls back to using the filename (in preference to
the blob's name, which is likely to be garbage like a raw
sha1).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's a subtle distinction between "name" and "path" for a
blob that we resolve: the name is what the user told us on
the command line, and the path is what we traversed when
finding the blob within a tree (if we did so).
When we diff blobs directly, we use "name", but "path" is
more likely to be useful to the user (it will find the
correct .gitattributes, and give them a saner diff header).
We still have to fall back to using the name for some cases
(i.e., any blob reference that isn't of the form tree:path).
That's the best we can do in such a case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "a..b" revision syntax was designed to handle commits,
so it doesn't bother to record any mode we find while
traversing a "tree:path" endpoint. These days "git diff" can
diff blobs using either "a:path..b:path" (with dots) or
"a:path b:path" (without), but the two behave
inconsistently, as the with-dots version fails to notice the
mode.
Let's teach the dot-dot range parser to record modes; it
doesn't cost us anything, and it makes this case work.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-diff command can directly compare two blobs (or a
blob and a file), but we don't test this at all. Let's add
some basic tests that reveal a few problems.
There are basically four interesting inputs:
1. sha1 against sha1 (where diff has no information beyond
the contents)
2. tree:path against tree:path (where it can get
information via get_sha1_with_context)
3. Same as (2), but using the ".." range syntax
4. tree:path against a filename
And beyond generating a sane diff, we care about a few
little bits: which paths they show in the diff header, and
whether they correctly pick up a mode change.
They should all be able to show a mode except for (1),
though note that case (3) is currently broken.
For the headers, we would ideally show the path within the
tree if we have it, making:
git diff a:path b:path
look the same as:
git diff a b -- path
We can't always do that (e.g., in the direct sha1/sha1 diff,
we have no path to show), in which case we should fall back
to the name that resolved to the blob (which is nonsense
from the repository's perspective, but is the best we can
do).
Aside from the fallback case in (1), none of the cases get
this right. Cases (2) and (3) always show the full
tree:path, even though we should be able to know just the
"path" portion.
Case (4) picks up the filename path, but assigns it to
_both_ sides of the diff. So this works for:
git diff tree:path path
but not for:
git diff tree:other_path path
The appropriate tests are marked to expect failure.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are parsing a range like "a..b", we write a
temporary NUL over the first ".", so that we can access the
names "a" and "b" as C strings. But our restoration of the
original "." is done at inconsistent times, which can lead
to confusing results.
For most calls, we restore the "." after we resolve the
names, but before we call verify_non_filename(). This means
that when we later call add_pending_object(), the name for
the left-hand "a" has been re-expanded to "a..b". You can
see this with:
git log --source a...b
where "b" will be correctly marked with "b", but "a" will be
marked with "a...b". Likewise with "a..b" (though you need
to use --boundary to even see "a" at all in that case).
To top off the confusion, when the REVARG_CANNOT_BE_FILENAME
flag is set, we skip the non-filename check, and leave the
NUL in place.
That means we do report the correct name for "a" in the
pending array. But some code paths try to show the whole
"a...b" name in error messages, and these erroneously show
only "a" instead of "a...b". E.g.:
$ git cherry-pick HEAD:foo...HEAD:foo
error: object d95f3ad14dee633a758d2e331151e950dd13e4ed is a blob, not a commit
error: object d95f3ad14dee633a758d2e331151e950dd13e4ed is a blob, not a commit
fatal: Invalid symmetric difference expression HEAD:foo
(That last message should be "HEAD:foo...HEAD:foo"; I used
cherry-pick because it passes the CANNOT_BE_FILENAME flag).
As an interesting side note, cherry-pick actually looks at
and re-resolves the arguments from the pending->name fields.
So it would have been visibly broken by the first bug, but
the effect was canceled out by the second one.
This patch makes the whole function consistent by re-writing
the NUL immediately after calling verify_non_filename(), and
then restoring the "." as appropriate in some error-printing
and early-return code paths.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is an implicit assumption that a directory containing only
untracked and ignored paths should itself be considered untracked. This
makes sense in use cases where we're asking if a directory should be
added to the git database, but not when we're asking if a directory can
be safely removed from the working tree; as a result, clean -d would
assume that an "untracked" directory containing ignored paths could be
deleted, even though doing so would also remove the ignored paths.
To get around this, we teach clean -d to collect ignored paths and skip
an untracked directory if it contained an ignored path, instead just
removing the untracked contents thereof. To achieve this, cmd_clean()
has to collect all untracked contents of untracked directories, in
addition to all ignored paths, to determine which untracked dirs must be
skipped (because they contain ignored paths) and which ones should *not*
be skipped.
For this purpose, correct_untracked_entries() is introduced to prune a
given dir_struct of untracked entries containing ignored paths and those
untracked entries encompassed by the untracked entries which are not
pruned away.
A memory leak is also fixed in cmd_clean().
This also fixes the known breakage in t7300, since clean -d now skips
untracked directories containing ignored paths.
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of the test was not enclosed in single quotes, which
broke the coloring scheme that I am used to. Upon closer inspection
the test is good, but the description is a bit vague. So extend the
description of the first test.
While at it align the description of the file to match what we actually
test in the file.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we taught read_directory_recursive() to recurse into untracked
directories in search of ignored files given DIR_SHOW_IGNORED_TOO, that
had the side effect of teaching it to collect the untracked contents of
untracked directories. It doesn't always make sense to return these,
though (we do need them for `clean -d`), so we introduce a flag
(DIR_KEEP_UNTRACKED_CONTENTS) to control whether or not read_directory()
strips dir->entries of the untracked contents of untracked dirs.
We also introduce check_contains() to check if one dir_entry corresponds
to a path which contains the path corresponding to another dir_entry.
This also fixes known breakages in t7061, since status --ignored now
searches untracked directories for ignored files.
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Per eb8c5b87, `status --ignored` by design does not list ignored files
if they are in a directory which contains only ignored and untracked
files (which is itself considered to be untracked) without `-uall`. This
does not make sense for `--ignored`, which claims to "Show ignored files
as well."
Thus we revisit eb8c5b87 and decide that for such directories, `status
--ignored` will list the directory as untracked *and* list all ignored
files within said directory even without `-uall`.
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If git sees a directory which contains only untracked and ignored
files, clean -d should not remove that directory. It was recently
discovered that this is *not* true of git clean -d, and it's possible
that this has never worked correctly; this test and its accompanying
patch series aims to fix that.
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When peeling a tag for prepare_revision_walk(), we do not
respect the ignore_missing_links flag. This can lead to a
bogus error when pack-objects walks the possibly-broken
unreachable-but-recent part of the object graph.
The other link-following all happens via traverse_commit_list(),
which explains why this case was missed. And our tests
covered only broken links from commits. Let's be more
comprehensive and cover broken tree entries (which do work)
and tags (which shows off this bug).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a commit message is edited with the "verbose" option, the buffer
will have a cut line and diff after the log message, like so:
my subject
# ------------------------ >8 ------------------------
# Do not touch the line above.
# Everything below will be removed.
diff --git a/foo.txt b/foo.txt
index 5716ca5..7601807 100644
--- a/foo.txt
+++ b/foo.txt
@@ -1 +1 @@
-bar
+baz
"git interpret-trailers" is unaware of the cut line, and assumes the
trailer block would be at the end of the whole thing. This can easily
be seen with:
$ GIT_EDITOR='git interpret-trailers --in-place --trailer Acked-by:me' \
git commit --amend -v
Teach "git interpret-trailers" to notice the cut-line and ignore the
remainder of the input when looking for a place to add new trailer
block. This makes it consistent with how "git commit -v -s" inserts a
new Signed-off-by: line.
This can be done by the same logic as the existing helper function,
wt_status_truncate_message_at_cut_line(), uses, but it wants the caller
to pass a strbuf to it. Because the function ignore_non_trailer() used
by the command takes a <pointer, length> pair, not a strbuf, steal the
logic from wt_status_truncate_message_at_cut_line() to create a new
wt_status_locate_end() helper function that takes <pointer, length>
pair, and make ignore_non_trailer() call it to help "interpret-trailers".
Since there is only one caller of wt_status_truncate_message_at_cut_line()
in cmd_commit(), rewrite it to call wt_status_locate_end() helper instead
and remove the old helper that no longer has any caller.
Signed-off-by: Brian Malehorn <bmalehorn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One test in t5400 examines the packet exchange between git-push and
git-receive-pack. The latter inherits the GIT_TRACE_PACKET environment
variable, so that both processes dump trace data into the same file
concurrently. This should not be a problem because the trace file is
opened with O_APPEND.
On Windows, however, O_APPEND is not atomic as it should be: it is
emulated as lseek(SEEK_END) followed by write(). For this reason, the
test is unreliable: it can happen that one process overwrites a line
that was just written by the other process. As a consequence, the test
sometimes does not find one or another line that is expected (and it is
also successful occasionally).
The test case is actually only interested in the output of git-push.
To ensure that only git-push writes to the trace file, override the
receive-pack command such that it does not even open the trace file.
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 438fc68462 ("push options: pass push options to the transport
helper", 08-02-2017), the test coverage was reduced to run no tests at all
if you lack a http server. Move the http initialization to the end,
such that only http tests are skipped when a http server is missing.
The test in between that tests submodule propagation is safe to run before
the http tests as it makes its own test directories `parent` and
`parent_upstream`.
Noticed-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
