Now that mktag has been migrated to use the fsck machinery to check
its input, it makes sense to teach it to run in the equivalent of "git
fsck"'s default mode.
For cases where mktag is used to (re)create a tag object using data
from an existing and malformed tag object, the validation may
optionally have to be loosened. Teach the command to take the
"--[no-]strict" option to do so.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In earlier commits mktag learned to use the fsck machinery, at which
point we needed to add fsck.extraHeaderEntry so it could be as strict
about extra headers as it's been ever since it was implemented.
But it's not nice to need to switch away from "mktag" to "hash-object"
+ manual "fsck" just because you'd like to have an extra header. So
let's support turning it off by getting "fsck.*" variables from the
config.
Pedantically speaking it's still not possible to make "mktag" behave
just like "hash-object -t tag" does, since we're unconditionally going
to check the referenced object in verify_object_in_tag(), which is our
own check, and not one that exists in fsck.c.
But the spirit of "this works like fsck" is preserved, in that if you
created such a tag with "hash-object" and did a full "fsck" on the
repository it would also error out about that invalid object, it just
wouldn't emit the same message as fsck does.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the validation logic in "mktag" to use fsck's fsck_tag()
instead of its own custom parser. Curiously the logic for both dates
back to the same commit[1]. Let's unify them so we're not maintaining
two sets functions to verify that a tag is OK.
The behavior of fsck_tag() and the old "mktag" code being removed here
is different in few aspects.
I think it makes sense to remove some of those checks, namely:
A. fsck only cares that the timezone matches [-+][0-9]{4}. The mktag
code disallowed values larger than 1400.
Yes there's currently no timezone with a greater offset[2], but
since we allow any number of non-offical timezones (e.g. +1234)
passing this through seems fine. Git also won't break in the
future if e.g. French Polynesia decides it needs to outdo the Line
Islands when it comes to timezone extravagance.
B. fsck allows missing author names such as "tagger <email>", mktag
wouldn't, but would allow e.g. "tagger [2 spaces] <email>" (but
not "tagger [1 space] <email>"). Now we allow all of these.
C. Like B, but "mktag" disallowed spaces in the <email> part, fsck
allows it.
In some ways fsck_tag() is stricter than "mktag" was, namely:
D. fsck disallows zero-padded dates, but mktag didn't care. So
e.g. the timestamp "0000000000 +0000" produces an error now. A
test in "t1006-cat-file.sh" relied on this, it's been changed to
use "hash-object" (without fsck) instead.
There was one check I deemed worth keeping by porting it over to
fsck_tag():
E. "mktag" did not allow any custom headers, and by extension (as an
empty commit is allowed) also forbade an extra stray trailing
newline after the headers it knew about.
Add a new check in the "ignore" category to fsck and use it. This
somewhat abuses the facility added in efaba7cc77 (fsck:
optionally ignore specific fsck issues completely, 2015-06-22).
This is somewhat of hack, but probably the least invasive change
we can make here. The fsck command will shuffle these categories
around, e.g. under --strict the "info" becomes a "warn" and "warn"
becomes "error". Existing users of fsck's (and others,
e.g. index-pack) --strict option rely on this.
So we need to put something into a category that'll be ignored by
all existing users of the API. Pretending that
fsck.extraHeaderEntry=error ("ignore" by default) was set serves
to do this for us.
1. ec4465adb3 (Add "tag" objects that can be used to sign other
objects., 2005-04-25)
2. https://en.wikipedia.org/wiki/List_of_UTC_time_offsets
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the mktag documentation to compare itself to the similar
"hash-object -t tag" command. Before this someone reading the
documentation wouldn't have much of an idea what the difference
was.
Let's allude to our own validation logic, and cross-link the "mktag"
and "hash-object" documentation to aid discover-ability. A follow-up
change to migrate "mktag" to use "fsck" validation will make the part
about validation logic clearer.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's background maintenance uses cron by default, but this is not
available on Windows. Instead, integrate with Task Scheduler.
Tasks can be scheduled using the 'schtasks' command. There are several
command-line options that can allow for some advanced scheduling, but
unfortunately these seem to all require authenticating using a password.
Instead, use the "/xml" option to pass an XML file that contains the
configuration for the necessary schedule. These XML files are based on
some that I exported after constructing a schedule in the Task Scheduler
GUI. These options only run background maintenance when the user is
logged in, and more fields are populated with the current username and
SID at run-time by 'schtasks'.
Since the GIT_TEST_MAINT_SCHEDULER environment variable allows us to
specify 'schtasks' as the scheduler, we can test the Windows-specific
logic on other platforms. Thus, add a check that the XML file written
by Git is valid when xmllint exists on the system.
Since we use a temporary file for the XML files sent to 'schtasks', we
prefix the random characters with the frequency so it is easier to
examine the proper file during tests. Instead of an exact match on the
'args' file, we 'grep' for the arguments other than the filename.
There is a deficiency in the current design. Windows has two kinds of
applications: GUI applications that start by "winmain()" and console
applications that start by "main()". Console applications are attached
to a new Console window if they are not already associated with a GUI
application. This means that every hour the scheudled task launches a
command window for the scheduled tasks. Not only is this visually
obtrusive, but it also takes focus from whatever else the user is
doing!
A simple fix would be to insert a GUI application that acts as a shim
between the scheduled task and Git. This is currently possible in Git
for Windows by setting the <Command> tag equal to
C:\Program Files\Git\git-bash.exe
with options "--hide --no-needs-console --command=cmd\git.exe"
followed by the arguments currently used. Since git-bash.exe is not
included in Windows builds of core Git, I chose to leave out this
feature. My plan is to submit a small patch to Git for Windows that
converts the use of git.exe with this use of git-bash.exe in the
short term. In the long term, we can consider creating this GUI
shim application within core Git, perhaps in contrib/.
Co-authored-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing mechanism for scheduling background maintenance is done
through cron. The 'crontab -e' command allows updating the schedule
while cron itself runs those commands. While this is technically
supported by macOS, it has some significant deficiencies:
1. Every run of 'crontab -e' must request elevated privileges through
the user interface. When running 'git maintenance start' from the
Terminal app, it presents a dialog box saying "Terminal.app would
like to administer your computer. Administration can include
modifying passwords, networking, and system settings." This is more
alarming than what we are hoping to achieve. If this alert had some
information about how "git" is trying to run "crontab" then we would
have some reason to believe that this dialog might be fine. However,
it also doesn't help that some scenarios just leave Git waiting for
a response without presenting anything to the user. I experienced
this when executing the command from a Bash terminal view inside
Visual Studio Code.
2. While cron initializes a user environment enough for "git config
--global --show-origin" to show the correct config file information,
it does not set up the environment enough for Git Credential Manager
Core to load credentials during a 'prefetch' task. My prefetches
against private repositories required re-authenticating through UI
pop-ups in a way that should not be required.
The solution is to switch from cron to the Apple-recommended [1]
'launchd' tool.
[1] https://developer.apple.com/library/archive/documentation/MacOSX/Conceptual/BPSystemStartup/Chapters/ScheduledJobs.html
The basics of this tool is that we need to create XML-formatted
"plist" files inside "~/Library/LaunchAgents/" and then use the
'launchctl' tool to make launchd aware of them. The plist files
include all of the scheduling information, along with the command-line
arguments split across an array of <string> tags.
For example, here is my plist file for the weekly scheduled tasks:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0"><dict>
<key>Label</key><string>org.git-scm.git.weekly</string>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/git-core/git</string>
<string>--exec-path=/usr/local/libexec/git-core</string>
<string>for-each-repo</string>
<string>--config=maintenance.repo</string>
<string>maintenance</string>
<string>run</string>
<string>--schedule=weekly</string>
</array>
<key>StartCalendarInterval</key>
<array>
<dict>
<key>Day</key><integer>0</integer>
<key>Hour</key><integer>0</integer>
<key>Minute</key><integer>0</integer>
</dict>
</array>
</dict>
</plist>
The schedules for the daily and hourly tasks are more complicated
since we need to use an array for the StartCalendarInterval with
an entry for each of the six days other than the 0th day (to avoid
colliding with the weekly task), and each of the 23 hours other
than the 0th hour (to avoid colliding with the daily task).
The "Label" value is currently filled with "org.git-scm.git.X"
where X is the frequency. We need a different plist file for each
frequency.
The launchctl command needs to be aligned with a user id in order
to initialize the command environment. This must be done using
the 'launchctl bootstrap' subcommand. This subcommand is new as
of macOS 10.11, which was released in September 2015. Before that
release the 'launchctl load' subcommand was recommended. The best
source of information on this transition I have seen is available
at [2]. The current design does not preclude a future version that
detects the available fatures of 'launchctl' to use the older
commands. However, it is best to rely on the newest version since
Apple might completely remove the deprecated version on short
notice.
[2] https://babodee.wordpress.com/2016/04/09/launchctl-2-0-syntax/
To remove a schedule, we must run 'launchctl bootout' with a valid
plist file. We also need to 'bootout' a task before the 'bootstrap'
subcommand will succeed, if such a task already exists.
The need for a user id requires us to run 'id -u' which works on
POSIX systems but not Windows. Further, the need for fully-qualitifed
path names including $HOME behaves differently in the Git internals and
the external test suite. The $HOME variable starts with "C:\..." instead
of the "/c/..." that is provided by Git in these subcommands. The test
therefore has a prerequisite that we are not on Windows. The cross-
platform logic still allows us to test the macOS logic on a Linux
machine.
We can verify the commands that were run by 'git maintenance start'
and 'git maintenance stop' by injecting a script that writes the
command-line arguments into GIT_TEST_MAINT_SCHEDULER.
An earlier version of this patch accidentally had an opening
"<dict>" tag when it should have had a closing "</dict>" tag. This
was caught during manual testing with actual 'launchctl' commands,
but we do not want to update developers' tasks when running tests.
It appears that macOS includes the "xmllint" tool which can verify
the XML format. This is useful for any system that might contain
the tool, so use it whenever it is available.
We strive to make these tests work on all platforms, but Windows caused
some headaches. In particular, the value of getuid() called by the C
code is not guaranteed to be the same as `$(id -u)` invoked by a test.
This is because `git.exe` is a native Windows program, whereas the
utility programs run by the test script mostly utilize the MSYS2 runtime,
which emulates a POSIX-like environment. Since the purpose of the test
is to check that the input to the hook is well-formed, the actual user
ID is immaterial, thus we can work around the problem by making the the
test UID-agnostic. Another subtle issue is the $HOME environment
variable being a Windows-style path instead of a Unix-style path. We can
be more flexible here instead of expecting exact path matches.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Co-authored-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We document the delta data as a set of instructions, but forget to
document the two sizes that precede those instructions: the size of the
base object and the size of the object to be reconstructed. Fix this
omission.
Rather than cramming all the details about the encoding into the running
text, introduce a separate section detailing our "size encoding" and
refer to it.
Reported-by: Ross Light <ross@zombiezen.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'gitmodules.txt' is a guide about the '.gitmodules' file that describes
submodule properties, and that file must exist at the root of the
repository. This was clarified in e5b5c1d2cf (Document clarification:
gitmodules, gitattributes, 2008-08-31).
However, that commit mistakenly uses the non-existing environment
variable 'GIT_WORK_DIR' to refer to the root of the repository.
Fix that by using the correct variable, 'GIT_WORK_TREE'. Take the
opportunity to modernize and improve the formatting of that guide,
and fix a grammar mistake.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows users to write hash-agnostic scripts and configs by
disabling abbreviations. Using "-c core.abbrev=40" will be
insufficient with SHA-256, and "-c core.abbrev=64" won't work with
SHA-1 repos today.
Signed-off-by: Eric Wong <e@80x24.org>
[jc: tweaked implementation, added doc and a test]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend the wording of documentation added in 6cfec03680 (mktag:
minimally update the description., 2007-06-10). It makes more sense to
say "when it exists" here, as we're referring to "the message".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "mktag" documentation to refer to the input hash as just
"hash", not "sha1". This command has supported SHA-256 for a while
now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'linkgit' Asciidoc macro is misspelled as 'linkit' in the
description of 'GIT_SEQUENCE_EDITOR' since the addition of that variable
to git(1) in 902a126eca (doc: mention GIT_SEQUENCE_EDITOR and
'sequence.editor' more, 2020-08-31). Also, it uses two colons instead of
one.
Fix that.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a missing "a" before "bunch".
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move description of --diff-merges option from git-log.txt to
diff-options.txt so that it is included in the git-show help.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After introduction of the --diff-merges=first-parent, the
--first-parent sets the default format for merges to the same value as
this new option. Document this behavior and add corresponding
reference to --diff-merges.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mention --diff-merges instead of -m in a note to merge formats to aid
discoverability, as -m is now described among --diff-merges options
anyway.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Describe all the new --diff-merges options in the git-log.txt and
adopt description of originals accordingly.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git worktree repair` knows how to repair the two-way links between the
repository and a worktree as long as a link in one or the other
direction is sound. For instance, if a linked worktree is moved (without
using `git worktree move`), repair is possible because the worktree
still knows the location of the repository even though the repository no
longer knows where the worktree is. Similarly, if the repository is
moved, repair is possible since the repository still knows the locations
of the worktrees even though the worktrees no longer know where the
repository is.
However, if both the repository and the worktrees are moved, then links
are severed in both directions, and no repair is possible. This is the
case even when the new worktree locations are specified as arguments to
`git worktree repair`. The reason for this limitation is twofold. First,
when `repair` consults the worktree's gitfile (/path/to/worktree/.git)
to determine the corresponding <repo>/worktrees/<id>/gitdir file to fix,
<repo> is the old path to the repository, thus it is unable to fix the
`gitdir` file at its new location since it doesn't know where it is.
Second, when `repair` consults <repo>/worktrees/<id>/gitdir to find the
location of the worktree's gitfile (/path/to/worktree/.git), the path
recorded in `gitdir` is the old location of the worktree's gitfile, thus
it is unable to repair the gitfile since it doesn't know where it is.
Fix these shortcomings by teaching `repair` to attempt to infer the new
location of the <repo>/worktrees/<id>/gitdir file when the location
recorded in the worktree's gitfile has become stale but the file is
otherwise well-formed. The inference is intentionally simple-minded.
For each worktree path specified as an argument, `git worktree repair`
manually reads the ".git" gitfile at that location and, if it is
well-formed, extracts the <id>. It then searches for a corresponding
<id> in <repo>/worktrees/ and, if found, concludes that there is a
reasonable match and updates <repo>/worktrees/<id>/gitdir to point at
the specified worktree path. In order for <repo> to be known, `git
worktree repair` must be run in the main worktree or bare repository.
`git worktree repair` first attempts to repair each incoming
/path/to/worktree/.git gitfile to point at the repository, and then
attempts to repair outgoing <repo>/worktrees/<id>/gitdir files to point
at the worktrees. This sequence was chosen arbitrarily when originally
implemented since the order of fixes is immaterial as long as one side
of the two-way link between the repository and a worktree is sound.
However, for this new repair technique to work, the order must be
reversed. This is because the new inference mechanism, when it is
successful, allows the outgoing <repo>/worktrees/<id>/gitdir file to be
repaired, thus fixing one side of the two-way link. Once that side is
fixed, the other side can be fixed by the existing repair mechanism,
hence the order of repairs is now significant.
Two safeguards are employed to avoid hijacking a worktree from a
different repository if the user accidentally specifies a foreign
worktree as an argument. The first, as described above, is that it
requires an <id> match between the repository and the worktree. That
itself is not foolproof for preventing hijack, so the second safeguard
is that the inference will only kick in if the worktree's
/path/to/worktree/.git gitfile does not point at a repository.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our users are going to be trained to prepare for future change of
init.defaultBranch configuration variable.
* js/init-defaultbranch-advice:
init: provide useful advice about init.defaultBranch
get_default_branch_name(): prepare for showing some advice
branch -m: allow renaming a yet-unborn branch
init: document `init.defaultBranch` better
Build optimization.
* rj/make-clean:
Makefile: don't use a versioned temp distribution directory
Makefile: don't try to clean old debian build product
gitweb/Makefile: conditionally include ../GIT-VERSION-FILE
Documentation/Makefile: conditionally include ../GIT-VERSION-FILE
Documentation/Makefile: conditionally include doc.dep
Newer versions of xsltproc can assign IDs in HTML documents it
generates in a consistent manner. Use the feature to help format
HTML version of the user manual reproducibly.
* ae/doc-reproducible-html:
doc: make HTML manual reproducible
The glossary described a branch as an "active" line of development,
which is misleading---a stale and non-moving branch is still a
branch.
* so/glossary-branch-is-not-necessarily-active:
glossary: improve "branch" definition
"git $cmd $args", when $cmd is not a recognised subcommand, by
default tries to see if $cmd is a typo of an existing subcommand
and optionally executes the corrected command if there is only one
possibility, depending on the setting of help.autocorrect; the
users can now disable the whole thing, including the cycles spent
to find a likely typo, by setting the configuration variable to
'never'.
* dd/help-autocorrect-never:
help.c: help.autocorrect=never means "do not compute suggestions"
Update the documentation of the file system monitor extension to
describe version 2.
The format was extended to support opaque tokens in:
56c6910028 fsmonitor: change last update timestamp on the index_state to opaque token
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was implemented in the 'git multi-pack-index' command and
merged in 468b3221 (Merge branch 'ds/multi-pack-verify',
2018-10-10).
And there's no 'git midx' command.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our documentation does not mention any future plan to change 'master' to
other value. It is a good idea to document this, though.
Initial-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git rev-parse has several options which print various paths. Some of
these paths are printed relative to the current working directory, and
some are absolute.
Normally, this is not a problem, but there are times when one wants
paths entirely in one format or another. This can be done trivially if
the paths are canonical, but canonicalizing paths is not possible on
some shell scripting environments which lack realpath(1) and also in Go,
which lacks functions that properly canonicalize paths on Windows.
To help out the scripter, let's provide an option which turns most of
the paths printed by git rev-parse to be either relative to the current
working directory or absolute and canonical. Document which options are
affected and which are not so that users are not confused.
This approach is cleaner and tidier than providing duplicates of
existing options which are either relative or absolute.
Note that if the user needs both forms, it is possible to pass an
additional option in the middle of the command line which changes the
behavior of subsequent operations.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a "key_value_separator" option to the "%(trailers)" pretty format,
to go along with the existing "separator" argument. In combination
these two options make it trivial to produce machine-readable (e.g. \0
and \0\0-delimited) format output.
As elaborated on in a previous commit which added "keyonly" it was
needlessly tedious to extract structured data from "%(trailers)"
before the addition of this "key_value_separator" option. As seen by
the test being added here extracting this data now becomes trivial.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for a "keyonly". This allows for easier parsing out of the
key and value. Before if you didn't want to make assumptions about how
the key was formatted. You'd need to parse it out as e.g.:
--pretty=format:'%H%x00%(trailers:separator=%x00%x00)' \
'%x00%(trailers:separator=%x00%x00,valueonly)'
And then proceed to deduce keys by looking at those two and
subtracting the value plus the hardcoded ": " separator from the
non-valueonly %(trailers) line. Now it's possible to simply do:
--pretty=format:'%H%x00%(trailers:separator=%x00%x00,keyonly)' \
'%x00%(trailers:separator=%x00%x00,valueonly)'
Which at least reduces it to a state machine where you get N keys and
correlate them with N values. Even better would be to have a way to
change the ": " delimiter to something easily machine-readable (a key
might contain ": " too). A follow-up change will add support for that.
I don't really have a use-case for just "keyonly" myself. I suppose it
would be useful in some cases as "key=*" matches case-insensitively,
so a plain "keyonly" will give you the variants of the keys you
matched. I'm mainly adding it to fix the inconsistency with
"valueonly".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the documentation for the various %(trailers) options so it
isn't repeating part of the documentation for "only" about how boolean
values are handled. Instead, let's split the description of that into
general documentation at the top.
It then suffices to refer to it by listing the options as
"opt[=<BOOL>]". I'm also changing it to upper-case "[=<BOOL>]" from
"[=val]" for consistency with "<SEP>"
It took me a couple of readings to realize that these options were
referring back to the "only" option's treatment of boolean
values.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'clean' target is still noticeably slow on cygwin, despite the
substantial improvement made by the previous patch. For example, the
second invocation of 'make clean' below:
$ make clean >/dev/null 2>&1
$ make clean
...
make[1]: Entering directory '/home/ramsay/git/Documentation'
make[2]: Entering directory '/home/ramsay/git'
make[2]: 'GIT-VERSION-FILE' is up to date.
make[2]: Leaving directory '/home/ramsay/git'
...
$
has been timed at 12.364s on my laptop (an old core i5-4200M @ 2.50GHz,
8GB RAM, 1TB HDD).
Notice that the 'clean' target is making a nested call to the parent
Makefile to ensure that the GIT-VERSION-FILE is up-to-date (prior to
the previous patch, there would have been _two_ such invocations).
This is to ensure that the $(GIT_VERSION) make variable is set, once
that file had been included. However, the 'clean' target does not use
the $(GIT_VERSION) variable, directly or indirectly, so it does not
have any affect on what the target removes. Therefore, the time spent
on ensuring an up to date GIT-VERSION-FILE is wasted effort.
In order to eliminate such wasted effort, use the value of the internal
$(MAKECMDGOALS) variable to only '-include ../GIT-VERSION-FILE' when the
target is not 'clean'. (This drops the time down to 10.361s, on my laptop,
giving an improvement of 16.20%).
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'clean' target is noticeably slow on cygwin, even for a 'do-nothing'
invocation of 'make clean'. For example, the second 'make clean' below:
$ make clean >/dev/null 2>&1
$ make clean
GIT_VERSION = 2.29.0
...
make[1]: Entering directory '/home/ramsay/git/Documentation'
GEN mergetools-list.made
GEN cmd-list.made
GEN doc.dep
...
$
has been timed at 23.339s, using git v2.29.0, on my laptop (an old core
i5-4200M @ 2.50GHz, 8GB RAM, 1TB HDD).
Notice that, since the 'doc.dep' file does not exist, make takes the
time (about 8s) to generate several files in order to create the doc.dep
include file. (If an 'include' file is missing, but a target for the
said file is present in the Makefile, make will execute that target
and, if that file now exists, throw away all its internal data and
re-read and re-parse the Makefile). Having spent the time to include
the 'doc.dep' file, the 'clean' target immediately deletes those files.
The document dependencies specified in the 'doc.dep' include file,
expressed as make targets and prerequisites, do not affect what the
'clean' target removes. Therefore, the time spent in generating the
dependencies is completely wasted effort.
In order to eliminate such wasted effort, use the value of the internal
$(MAKECMDGOALS) variable to only '-include doc.dep' when the target is
not 'clean'. (This drops the time down to 12.364s, on my laptop, giving
an improvement of 47.02%).
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* ma/grep-init-default:
MyFirstObjectWalk: drop `init_walken_defaults()`
grep: copy struct in one fell swoop
grep: use designated initializers for `grep_defaults`
grep: don't set up a "default" repo for grep
The transport layer was taught to optionally exchange the session
ID assigned by the trace2 subsystem during fetch/push transactions.
* js/trace2-session-id:
receive-pack: log received client session ID
send-pack: advertise session ID in capabilities
upload-pack, serve: log received client session ID
fetch-pack: advertise session ID in capabilities
transport: log received server session ID
serve: advertise session ID in v2 capabilities
receive-pack: advertise session ID in v0 capabilities
upload-pack: advertise session ID in v0 capabilities
trace2: add a public function for getting the SID
docs: new transfer.advertiseSID option
docs: new capability to advertise session IDs
Various subcommands of "git config" that takes value_regex
learn the "--literal-value" option to take the value_regex option
as a literal string.
* ds/config-literal-value:
config doc: value-pattern is not necessarily a regexp
config: implement --fixed-value with --get*
config: plumb --fixed-value into config API
config: add --fixed-value option, un-implemented
t1300: add test for --replace-all with value-pattern
t1300: test "set all" mode with value-pattern
config: replace 'value_regex' with 'value_pattern'
config: convert multi_replace to flags
"git update-ref --stdin" learns to take multiple transactions in a
single session.
* ps/update-ref-multi-transaction:
update-ref: disallow "start" for ongoing transactions
p1400: use `git-update-ref --stdin` to test multiple transactions
update-ref: allow creation of multiple transactions
t1400: avoid touching refs on filesystem
Git diff reports a submodule directory as -dirty even when there are
only untracked files in the submodule directory. This is inconsistent
with what `git describe --dirty` says when run in the submodule
directory in that state.
Make `--ignore-submodules=untracked` the default for `git diff` when
there is no configuration variable or command line option, so that the
command would not give '-dirty' suffix to a submodule whose working
tree has untracked files, to make it consistent with `git
describe --dirty` that is run in the submodule working tree.
And also make `--ignore-submodules=none` the default for `git status`
so that the user doesn't end up deleting a submodule that has
uncommitted (untracked) files.
Signed-off-by: Sangeeta Jain <sangunb09@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git-parse-remote" shell script library outlived its usefulness.
* ab/retire-parse-remote:
submodule: fix fetch_in_submodule logic
parse-remote: remove this now-unused library
submodule: remove sh function in favor of helper
submodule: use "fetch" logic instead of custom remote discovery
Versions of docbook-xsl newer than 1.79.1 allows xsltproc to assign
IDs to nodes in the generated HTML consistently, to make the output
resulting from the same source stable and reproducible.
Pass the generate.consistent.ids parameter from the command line to
ask for this feature. Older versions of the tool simply ignores the
parameter and produces their output the same way as before this
change, so there is no need to check for toolchain version.
Signed-off-by: Arnout Engelen <arnout@bzzt.net>
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Helped-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old phrasing is at least questionable, if not wrong, as there are
a lot of branches out there that didn't see active development for
years, yet they are still branches, ready to become active again any
time.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Multiple "credential-store" backends can race to lock the same
file, causing everybody else but one to fail---reattempt locking
with some timeout to reduce the rate of the failure.
* sa/credential-store-timeout:
crendential-store: use timeout when locking file
Expectation for the original contributor after responding to a
review comment to use the explanation in a patch update has been
described.
* jc/do-not-just-explain-but-update-your-patch:
MyFirstContribition: answering questions is not the end of the story
Fix an option name in "gc" documentation.
* ab/gc-keep-base-option:
gc: rename keep_base_pack variable for --keep-largest-pack
gc docs: change --keep-base-pack to --keep-largest-pack
In a recent commit, we stopped calling `init_grep_defaults()` from this
function. Thus, by the end of the tutorial, we still haven't added any
contents to this function. Let's remove it for simplicity.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The introductory part of the "git config --help" mentions the
optional value-pattern argument, but give no hint that it can be
something other than a regular expression (worse, it just says
"POSIX regexp", which usually means BRE but the regexp the command
takes is ERE). Also, it needs to be documented that the '!' prefix
to negate the match, which is only mentioned in this part of the
document, works only with regexp and not with the --fixed-value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git config' builtin takes a 'value-pattern' parameter for several
actions. This can cause confusion when expecting exact value matches
instead of regex matches, especially when the input string contains
metacharacters. While callers can escape the patterns themselves, it
would be more friendly to allow an argument to disable the pattern
matching in favor of an exact string match.
Add a new '--fixed-value' option that does not currently change the
behavior. The implementation will be filled in by later changes for
each appropriate action. For now, check and test that --fixed-value
will abort the command when included with an incompatible action or
without a 'value-pattern' argument.
The name '--fixed-value' was chosen over something simpler like
'--fixed' because some commands allow regular expressions on the
key in addition to the value.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'value_regex' argument in the 'git config' builtin is poorly named,
especially related to an upcoming change that allows exact string
matches instead of ERE pattern matches.
Perform a mostly mechanical change of every instance of 'value_regex' to
'value_pattern' in the codebase. This is only critical for documentation
and error messages, but it is best to be consistent inside the codebase,
too.
For documentation, use 'value-pattern' which is better punctuation. This
affects Documentation/git-config.txt and the usage in builtin/config.c,
which was already mixed between 'value_regex' and 'value-regex'.
I gave some thought to leaving the value_regex variables inside config.c
that are regex_t pointers. However, it is probably best to keep the name
consistent with the rest of the variables.
This does not update the translations inside the po/ directory, as that
creates conflicts with ongoing work. The input strings should
automatically update through automation, and a few of the output strings
currently use "[value_regex]" directly.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While help.autocorrect can be set to 0 to decline auto-execution of
possibly mistyped commands, it still spends cycles to compute the
suggestions, and it wastes screen real estate.
Update help.autocorrect to accept the string "never" to just exit
with error upon mistyped commands to help users who prefer to never
see suggested corrections at all.
While at it, introduce "immediate" as a more readable way to
immediately execute the auto-corrected command, which can be done
with negative value.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When holding the lock for rewriting the credential file, use a timeout
to avoid race conditions when the credentials file needs to be updated
in parallel.
An example would be doing `fetch --all` on a repository with several
remotes that need credentials, using parallel fetching.
The timeout can be configured using "credentialStore.lockTimeoutMS",
defaulting to 1 second.
Signed-off-by: Simão Afonso <simao.afonso@powertools-tech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Emit a trace2 error event whenever warning() is called, just like when
die(), error(), or usage() is called.
This helps debugging issues that would trigger warnings but not errors.
In particular, this might have helped debugging an issue I encountered
with commit graphs at $DAYJOB [1].
There is a tradeoff between including potentially relevant messages and
cluttering up the trace output produced. I think that warning() messages
should be included in traces, because by its nature, Git is used over
multiple invocations of the Git tool, and a failure (currently traced)
in a Git invocation might be caused by an unexpected interaction in a
previous Git invocation that only has a warning (currently untraced) as
a symptom - as is the case in [1].
[1] https://lore.kernel.org/git/20200629220744.1054093-1-jonathantanmy@google.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A review exchange may begin with a reviewer asking "what did you
mean by this phrase in your log message (or here in the doc)?", the
author answering what was meant, and then the reviewer saying "ah,
that is what you meant---then the flow of the logic makes sense".
But that is not the happy end of the story. New contributors often
forget that the material that has been reviewed in the above exchange
is still unclear in the same way to the next person who reads it,
until it gets updated.
While we are in the vicinity, rephrase the verb "request" used to
refer to comments by reviewers to "suggest"---this matches the
contrast between "original" and "suggested" that appears later in
the same paragraph, and more importantly makes it clearer that it is
not like authors are to please reviewers' wishes but rather
reviewers are merely helping authors to polish their commits.
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Advanced and expert users may want to know how 'git maintenance start'
schedules background maintenance in order to customize their own
schedules beyond what the maintenance.* config values allow. Start a new
set of sections in git-maintenance.txt that describe how 'cron' is used
to run these tasks.
This is particularly valuable for users who want to inspect what Git is
doing or for users who want to customize the schedule further. Having a
baseline can provide a way forward for users who have never worked with
cron schedules.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-parse" learned the "--end-of-options" to help scripts to
safely take a parameter that is supposed to be a revision, e.g.
"git rev-parse --verify -q --end-of-options $rev".
* jk/rev-parse-end-of-options:
rev-parse: handle --end-of-options
rev-parse: put all options under the "-" check
rev-parse: don't accept options after dashdash
The maximum length of output filenames "git format-patch" creates
has become configurable (used to be capped at 64).
* jc/format-patch-name-max:
format-patch: make output filename configurable
In 15fabd1bbd ("builtin/grep.c: make configuration callback more
reusable", 2012-10-09), we learned to fill a `static struct grep_opt
grep_defaults` which we can use as a blueprint for other such structs.
At the time, we didn't consider designated initializers to be widely
useable, but these days, we do. (See, e.g., cbc0f81d96 ("strbuf: use
designated initializers in STRBUF_INIT", 2017-07-10).)
Use designated initializers to let the compiler set up the struct and so
that we don't need to remember to call `init_grep_defaults()`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`init_grep_defaults()` fills a `static struct grep_opt grep_defaults`.
This struct is then used by `grep_init()` as a blueprint for other such
structs. Notably, `grep_init()` takes a `struct repo *` and assigns it
into the target struct.
As a result, it is unnecessary for us to take a `struct repo *` in
`init_grep_defaults()` as well. We assign it into the default struct and
never look at it again. And in light of how we return early if we have
already set up the default struct, it's not just unnecessary, but is
also a bit confusing: If we are called twice and with different repos,
is it a bug or a feature that we ignore the second repo?
Drop the repo parameter for `init_grep_defaults()`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --keep-base-pack option never existed in git.git. It was the name
for the --keep-largest-pack option in earlier revisions of that series
before it landed as ae4e89e549 ("gc: add --keep-largest-pack option",
2018-04-15).
The later patches in that series[1][2] weren't changed to also refer
to --keep-largest-pack, so we've had this reference to a nonexisting
option ever since the feature initially landed.
1. 55dfe13df9 ("gc: add gc.bigPackThreshold config", 2018-04-15)
2. 9806f5a7bf ("gc --auto: exclude base pack if not enough mem to
"repack -ad"", 2018-04-15)
Reported-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git blame -L :funcname -- path" did not work well for a path for
which a userdiff driver is defined.
* pb/blame-funcname-range-userdiff:
blame: simplify 'setup_blame_bloom_data' interface
blame: simplify 'setup_scoreboard' interface
blame: enable funcname blaming with userdiff driver
line-log: mention both modes in 'blame' and 'log' short help
doc: add more pointers to gitattributes(5) for userdiff
blame-options.txt: also mention 'funcname' in '-L' description
doc: line-range: improve formatting
doc: log, gitk: move '-L' description to 'line-range-options.txt'
Parts of "git maintenance" to ease writing crontab entries (and
other scheduling system configuration) for it.
* ds/maintenance-part-3:
maintenance: add troubleshooting guide to docs
maintenance: use 'incremental' strategy by default
maintenance: create maintenance.strategy config
maintenance: add start/stop subcommands
maintenance: add [un]register subcommands
for-each-repo: run subcommands on configured repos
maintenance: add --schedule option and config
maintenance: optionally skip --auto process
While git-update-ref has recently grown commands which allow interactive
control of transactions in e48cf33b61 (update-ref: implement interactive
transaction handling, 2020-04-02), it is not yet possible to create
multiple transactions in a single session. To do so, one currently still
needs to invoke the executable multiple times.
This commit addresses this shortcoming by allowing the "start" command
to create a new transaction if the current transaction has already been
either committed or aborted.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous two commits removed the last use of a function in this
library, but most of it had been dead code for a while[1][2]. Only the
"get_default_remote" function was still being used.
Even though we had a manual page for this library it was never
intended (or I expect, actually) used outside of git.git. Let's just
remove it, if anyone still cares about a function here they can pull
them into their own project[3].
1. Last use of error_on_missing_default_upstream():
d03ebd411c ("rebase: remove the rebase.useBuiltin setting",
2019-03-18)
2. Last use of get_remote_merge_branch(): 49eb8d39c7 ("Remove
contrib/examples/*", 2018-03-25)
3. https://lore.kernel.org/git/87a6vmhdka.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document a new config option that allows users to determine whether or
not to advertise their session IDs to remote Git clients and servers.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In future patches, we will add the ability for Git servers and clients
to advertise unique session IDs via protocol capabilities. This
allows for easier debugging when both client and server logs are
available.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation on the "--abbrev=<n>" option did not say the
output may be longer than "<n>" hexdigits, which has been
clarified.
* jc/abbrev-doc:
doc: clarify that --abbrev=<n> is about the minimum length
We taught rev-list a new way to separate options from revisions in
19e8789b23 (revision: allow --end-of-options to end option parsing,
2019-08-06), but rev-parse uses its own parser. It should know about
--end-of-options not only for consistency, but because it may be
presented with similarly ambiguous cases. E.g., if a caller does:
git rev-parse "$rev" -- "$path"
to parse an untrusted input, then it will get confused if $rev contains
an option-like string like "--local-env-vars". Or even "--not-real",
which we'd keep as an option to pass along to rev-list.
Or even more importantly:
git rev-parse --verify "$rev"
can be confused by options, even though its purpose is safely parsing
untrusted input. On the plus side, it will always fail the --verify
part, as it will not have parsed a revision, so the caller will
generally "fail closed" rather than continue to use the untrusted
string. But it will still trigger whatever option was in "$rev"; this
should be mostly harmless, since rev-parse options are all read-only,
but I didn't carefully audit all paths.
This patch lets callers write:
git rev-parse --end-of-options "$rev" -- "$path"
and:
git rev-parse --verify --end-of-options "$rev"
which will both treat "$rev" always as a revision parameter. The latter
is a bit clunky. It would be nicer if we had defined "--verify" to
require that its next argument be the revision. But we have not
historically done so, and:
git rev-parse --verify -q "$rev"
does currently work. I added a test here to confirm that we didn't break
that.
A few implementation notes:
- We don't document --end-of-options explicitly in commands, but rather
in gitcli(7). So I didn't give it its own section in git-rev-parse(1).
But I did call it out specifically in the --verify section, and
include it in the examples, which should show best practices.
- We don't have to re-indent the main option-parsing block, because we
can combine our "did we see end of options" check with "does it start
with a dash". The exception is the pre-setup options, which need
their own block.
- We do however have to pull the "--" parsing out of the "does it start
with dash" block, because we want to parse it even if we've seen
--end-of-options.
- We'll leave "--end-of-options" in the output. This is probably not
technically necessary, as a careful caller will do:
git rev-parse --end-of-options $revs -- $paths
and anything in $revs will be resolved to an object id. However, it
does help a slightly less careful caller like:
git rev-parse --end-of-options $revs_or_paths
where a path "--foo" will remain in the output as long as it also
exists on disk. In that case, it's helpful to retain --end-of-options
to get passed along to rev-list, s it would otherwise see just
"--foo".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the past 15 years, we've used the hardcoded 64 as the length
limit of the filename of the output from the "git format-patch"
command. Since the value is shorter than the 80-column terminal, it
could grow without line wrapping a bit. At the same time, since the
value is longer than half of the 80-column terminal, we could fit
two or more of them in "ls" output on such a terminal if we allowed
to lower it.
Introduce a new command line option --filename-max-length=<n> and a
new configuration variable format.filenameMaxLength to override the
hardcoded default.
While we are at it, remove a check that the name of output directory
does not exceed PATH_MAX---this check is pointless in that by the
time control reaches the function, the caller would already have
done an equivalent of "mkdir -p", so if the system does not like an
overly long directory name, the control wouldn't have reached here,
and otherwise, we know that the system allowed the output directory
to exist. In the worst case, we will get an error when we try to
open the output file and handle the error correctly anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exit codes from "git remote add" etc. were not usable by scripted
callers.
* ab/git-remote-exit-code:
remote: add meaningful exit code on missing/existing
More preliminary tests have been added to document desired outcome
of various "directory rename" situations.
* en/dir-rename-tests:
t6423: more involved rules for renaming directories into each other
t6423: update directory rename detection tests with new rule
t6423: more involved directory rename test
directory-rename-detection.txt: update references to regression tests
Fix misspelled "specified" and "occurred" in documentation and
comments.
Signed-off-by: Marlon Rac Cambasis <marlonrc08@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Early text written in 2006 explains the "--abbrev=<n>" option to
"show only a partial prefix", without saying that the length of the
partial prefix is not necessarily the number given to the option to
ensure that the output names the object uniquely.
Update documentation for the diff family of commands, "blame",
"branch --verbose", "ls-files" and "ls-tree" to stress that the
short prefix must uniquely refer to an object, and <n> is merely
the mininum number of hexdigits used in the prefix.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff" family of commands learned the "-I<regex>" option to
ignore hunks whose changed lines all match the given pattern.
* mk/diff-ignore-regex:
diff: add -I<regex> that ignores matching changes
merge-base, xdiff: zero out xpparam_t structures
Document that the meaning of a Signed-off-by trailer can vary from
project to project in the end-user documentation, and clarify what
it means to this project.
* bk/sob-dco:
Documentation: stylistically normalize references to Signed-off-by:
SubmittingPatches: clarify DCO is our --signoff rule
Documentation: clarify and expand description of --signoff
doc: preparatory clean-up of description on the sign-off option
When "git commit-graph" detects the same commit recorded more than
once while it is merging the layers, it used to die. The code now
ignores all but one of them and continues.
* ds/commit-graph-merging-fix:
commit-graph: don't write commit-graph when disabled
commit-graph: ignore duplicates when merging layers
