People who work on projects with mostly linear history with frequent
whole file renames may want to always use "git log --follow" when
inspecting the life of the content that live in a single path.
Teach the command to behave as if "--follow" was given from the
command line when log.follow configuration variable is set *and*
there is one (and only one) path on the command line.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Accept a list of emails separated by commas in flags --cc, --to and
--bcc. Multiple addresses can already be given by using these options
multiple times, but it is more convenient to allow cutting-and-pasting
a list of addresses from the header of an existing e-mail message,
which already lists them as comma-separated list, as a value to a
single parameter.
The following format can now be used:
$ git send-email --to='Jane <jdoe@example.com>, mike@example.com'
Remove the limitation imposed by 79ee555b (Check and document the
options to prevent mistakes, 2006-06-21) which rejected every argument
with comma in --cc, --to and --bcc.
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a safeguard, checking out a branch already checked out by a different
worktree is disallowed. This behavior can be overridden with
--ignore-other-worktrees, however, this option is neither obvious nor
particularly discoverable. As a common safeguard override, --force is
more likely to come to mind. Therefore, overload it to also suppress the
check for a branch already checked out elsewhere.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a convenience, when <branch> is omitted from "git worktree <path>
<branch>" and neither -b nor -B is used, automatically create a new
branch named after <path>, as if "-b $(basename <path>)" was specified.
Thus, "git worktree add ../hotfix" creates a new branch named "hotfix"
and associates it with new worktree "../hotfix".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a convenience, like "git branch" and "git checkout -b", make
"git worktree add -b <newbranch> <path> <branch>" default to HEAD when
<branch> is omitted.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that "git worktree add" has achieved user-facing feature-parity with
"git checkout --to", retire the latter.
Move the actual linked worktree creation functionality,
prepare_linked_checkout() and its helpers, verbatim from checkout.c to
worktree.c.
This effectively reverts changes to checkout.c by 529fef2 (checkout:
support checking out into a new working directory, 2014-11-30) with the
exception of merge_working_tree() and switch_branches() which still
require specialized knowledge that a the checkout is occurring in a
newly-created linked worktree (signaled to them by the private
GIT_CHECKOUT_NEW_WORKTREE environment variable).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of git-worktree's roles is to populate the new worktree, much like
git-checkout, and thus, for convenience, ought to support several of the
same shortcuts. Toward this goal, add -b/-B options to create a new
branch and check it out in the new worktree.
(For brevity, only -b is mentioned in the synopsis; -B is omitted.)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of git-worktree's roles is to populate the new worktree, much like
git-checkout, and thus, for convenience, ought to support several of the
same shortcuts. Toward this goal, add a --detach option to detach HEAD
in the new worktree.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, "git worktree add" refuses to create a new worktree when
the requested branch is already checked out elsewhere. Add a --force
option to override this safeguard.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plan is to relocate "git checkout --to" functionality to "git
worktree add". As a first step, introduce a bare-bones git-worktree
"add" command along with documentation. At this stage, "git worktree
add" merely invokes "git checkout --to" behind the scenes, but an
upcoming patch will move the actual functionality
(checkout.c:prepare_linked_checkout() and its helpers) to worktree.c.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to the (current) absence of a "git worktree lock" command, locking
a worktree's administrative files to prevent automatic pruning is a
manual task, necessarily requiring low-level understanding of linked
worktree functionality. However, this level of detail does not belong
in the high-level DESCRIPTION section, so add a generalized discussion
of locking to DESCRIPTION and move the technical information to DETAILS.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The DESCRIPTION section should provide a high-level overview of linked
worktree functionality to bring users up to speed quickly, without
overloading them with low-level details, so relocate the technical
information to a new DETAILS section.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Relocate submodule warning to BUGS and enumerate missing commands.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the git-worktree command exists, its documentation page is the
natural place for the linked worktree description to reside. Relocate
the "MULTIPLE WORKING TREES" description verbatim from git-checkout.txt
to git-worktree.txt.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-worktree options affect some worktree commands but not others, but
this is not necessarily obvious from the option descriptions. Make this
clear by indicating explicitly which commands are affected by which
options.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was missed when "git prune --worktrees" became "git worktree prune".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have proper documentation for --force's interaction with -d
and -m, we can avoid duplication and consider -M and -D as convenience
aliases for -m --force and -d --force.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --force option was modified in 356e91f (branch: allow -f with -m and
-d, 2014-12-08), but the documentation was not updated.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a "distributed" VCS, git should better define the encodings of its core
textual data structures, in particular those that are part of the network
protocol.
That git is encoding agnostic is only really true for blob objects. E.g.
the 'non-NUL bytes' requirement of tree and commit objects excludes
UTF-16/32, and the special meaning of '/' in the index file as well as
space and linefeed in commit objects eliminates EBCDIC and other non-ASCII
encodings.
Git expects bytes < 0x80 to be pure ASCII, thus CJK encodings that partly
overlap with the ASCII range are problematic as well. E.g. fmt_ident()
removes trailing 0x5C from user names on the assumption that it is ASCII
'\'. However, there are over 200 GBK double byte codes that end in 0x5C.
UTF-8 as default encoding on Linux and respective path translations in the
Mac and Windows versions have established UTF-8 NFC as de-facto standard
for path names.
Update the documentation in i18n.txt to reflect the current status-quo.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is sometimes useful for importers to be able to read the SHA-1
corresponding to a mark that they have created via fast-import. For
example, they might want to embed the SHA-1 into the commit message of
a later commit. Or it might be useful for internal bookkeeping uses,
or for logging.
Add a "get-mark" command to "git fast-import" that allows the importer
to ask for the value of a mark that has been created earlier.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--count should be mentioned in the usage guide, this updates code and
documentation.
Signed-off-by: Lawrence Siebert <lawrencesiebert@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if commits were removed (i.e. a line was deleted) and print
warnings or stop git rebase depending on the value of the
configuration variable rebase.missingCommitsCheck.
This patch gives the user the possibility to avoid silent loss of
information (losing a commit through deleting the line in this case)
if he wants.
Add the configuration variable rebase.missingCommitsCheck.
- When unset or set to "ignore", no checking is done.
- When set to "warn", the commits are checked, warnings are
displayed but git rebase still proceeds.
- When set to "error", the commits are checked, warnings are
displayed and the rebase is stopped.
(The user can then use 'git rebase --edit-todo' and
'git rebase --continue', or 'git rebase --abort')
rebase.missingCommitsCheck defaults to "ignore".
Signed-off-by: Galan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of removing a line to remove the commit, you can use the
command "drop" (just like "pick" or "edit"). It has the same effect as
deleting the line (removing the commit) except that you keep a visual
trace of your actions, allowing a better control and reducing the
possibility of removing a commit by mistake.
Signed-off-by: Galan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This feeds the format directly to strftime. Besides being a
little more flexible, the main advantage is that your system
strftime may know more about your locale's preferred format
(e.g., how to spell the days of the week).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 23af91d (prune: strategies for linked checkouts - 2014-11-30)
adds "--worktrees" to "git prune" without realizing that "git prune" is
for object database only. This patch moves the same functionality to a
new command "git worktree".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
The sorting we could probably live without, but printing
duplicates is just a hassle for the user, who must then
de-dup themselves (or risk a wrong answer if they are doing
something like counting objects with a particular property).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"color.diff.plain" was a misnomer; give it 'color.diff.context' as
a more logical synonym.
* jk/color-diff-plain-is-context:
diff.h: rename DIFF_PLAIN color slot to DIFF_CONTEXT
diff: accept color.diff.context as a synonym for "plain"
Traditionally, external low-level 3-way merge drivers are expected
to produce their results based solely on the contents of the three
variants given in temporary files named by %O, %A and %B on their
command line. Additionally allow them to look at the final path
(given by %P).
* jc/ll-merge-expose-path:
ll-merge: pass the original path to external drivers
"git pull" has become more aware of the options meant for
underlying "git fetch" and then learned to use parse-options
parser.
* pt/pull-optparse:
pull: use git-rev-parse --parseopt for option parsing
pull: handle git-fetch's options as well
"git send-email" learned to handle more forms of sendmail style
aliases file.
* es/send-email-sendmail-alias:
send-email: further warn about unsupported sendmail aliases features
t9001: add sendmail aliases line continuation tests
t9001: refactor sendmail aliases test infrastructure
send-email: implement sendmail aliases line continuation support
send-email: simplify sendmail aliases comment and blank line recognizer
send-email: refactor sendmail aliases parser
send-email: fix style: cuddle 'elsif' and 'else' with closing brace
send-email: drop noise comments which merely repeat what code says
send-email: visually distinguish sendmail aliases parser warnings
send-email: further document missing sendmail aliases functionality
Identical to support in `git receive-pack for the config option
`receive.fsck.skiplist`, we now support ignoring given objects in
`git fsck` via `fsck.skiplist` altogether.
This is extremely handy in case of legacy repositories where it would
cause more pain to change incorrect objects than to live with them
(e.g. a duplicate 'author' line in an early commit object).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The optional new config option `receive.fsck.skipList` specifies the path
to a file listing the names, i.e. SHA-1s, one per line, of objects that
are to be ignored by `git receive-pack` when `receive.fsckObjects = true`.
This is extremely handy in case of legacy repositories where it would
cause more pain to change incorrect objects than to live with them
(e.g. a duplicate 'author' line in an early commit object).
The intended use case is for server administrators to inspect objects
that are reported by `git push` as being too problematic to enter the
repository, and to add the objects' SHA-1 to a (preferably sorted) file
when the objects are legitimate, i.e. when it is determined that those
problematic objects should be allowed to enter the server.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option avoids unpacking each and all blob objects, and just
verifies the connectivity. In particular with large repositories, this
speeds up the operation, at the expense of missing corrupt blobs,
ignoring unreachable objects and other fsck issues, if any.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have support in `git receive-pack` to deal with some legacy
repositories which have non-fatal issues.
Let's make `git fsck` itself useful with such repositories, too, by
allowing users to ignore known issues, or at least demote those issues
to mere warnings.
Example: `git -c fsck.missingEmail=ignore fsck` would hide
problems with missing emails in author, committer and tagger lines.
In the same spirit that `git receive-pack`'s usage of the fsck machinery
differs from `git fsck`'s – some of the non-fatal warnings in `git fsck`
are fatal with `git receive-pack` when receive.fsckObjects = true, for
example – we strictly separate the fsck.<msg-id> from the
receive.fsck.<msg-id> settings.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unsigned long option parsing (including 'k'/'m'/'g' suffix
parsing) is more widely applicable. Add support for OPT_MAGNITUDE
to parse-options.h and change pack-objects.c use this support.
The error behavior on parse errors follows that of OPT_INTEGER. The
name of the option that failed to parse is reported with a brief
message describing the expect format for the option argument and
then the full usage message for the command invoked.
This differs from the previous behavior for OPT_ULONG used in
pack-objects for --max-pack-size and --window-memory which used to
display the value supplied in the error message and did not display
the full usage message.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can sometimes be useful to examine all objects in the
repository. Normally this is done with "git rev-list --all
--objects", but:
1. That shows only reachable objects. You may want to look
at all available objects.
2. It's slow. We actually open each object to walk the
graph. If your operation is OK with seeing unreachable
objects, it's an order of magnitude faster to just
enumerate the loose directories and pack indices.
You can do this yourself using "ls" and "git show-index",
but it's non-obvious. This patch adds an option to
"cat-file --batch-check" to operate on all available
objects (rather than reading names from stdin).
This is based on a proposal by Charles Bailey to provide a
separate "git list-all-objects" command. That is more
orthogonal, as it splits enumerating the objects from
getting information about them. However, in practice you
will either:
a. Feed the list of objects directly into cat-file anyway,
so you can find out information about them. Keeping it
in a single process is more efficient.
b. Ask the listing process to start telling you more
information about the objects, in which case you will
reinvent cat-file's batch-check formatter.
Adding a cat-file option is simple and efficient. And if you
really do want just the object names, you can always do:
git cat-file --batch-check='%(objectname)' --batch-all-objects
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use a direct write() to output the results of --batch and
--batch-check. This is good for processes feeding the input
and reading the output interactively, but it introduces
measurable overhead if you do not want this feature. For
example, on linux.git:
$ git rev-list --objects --all | cut -d' ' -f1 >objects
$ time git cat-file --batch-check='%(objectsize)' \
<objects >/dev/null
real 0m5.440s
user 0m5.060s
sys 0m0.384s
This patch adds an option to use regular stdio buffering:
$ time git cat-file --batch-check='%(objectsize)' \
--buffer <objects >/dev/null
real 0m4.975s
user 0m4.888s
sys 0m0.092s
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify-tag by default displays human-readable output on standard error.
However, it can also be useful to get access to the raw gpg status
information, which is machine-readable, allowing automated
implementation of signing policy. Add a --raw option to make verify-tag
produce the gpg status information on standard error instead of the
human-readable format.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify-commit by default displays human-readable output on standard
error. However, it can also be useful to get access to the raw gpg
status information, which is machine-readable, allowing automated
implementation of signing policy. Add a --raw option to make
verify-commit produce the gpg status information on standard error
instead of the human-readable format.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the common case that the commit encoding matches the
output encoding, we do not touch the buffer at all, which
makes things much more efficient. But it might be unclear to
a consumer that we will pass through bogus sequences.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git checkout <pathspec> can be used to reset changes in the working tree.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Communication between the HTTP server and http_backend process can
lead to a dead-lock when relaying a large ref negotiation request.
Diagnose the situation better, and mitigate it by reading such a
request first into core (to a reasonable limit).
* jk/http-backend-deadlock:
http-backend: spool ref negotiation requests to buffer
t5551: factor out tag creation
http-backend: fix die recursion with custom handler
Clarify that "log --raw" and "log --format=raw" are unrelated
concepts.
* mm/log-format-raw-doc:
Documentation/log: clarify sha1 non-abbreviation in log --raw
Documentation/log: clarify what --raw means
"git send-email" learned the alias file format used by the sendmail
program (in an abbreviated form).
* ah/send-email-sendmail-alias:
t9001: write $HOME/, not ~/, to help shells without tilde expansion
send-email: add sendmail email aliases format
When debugging the pack protocol, it is sometimes useful to
store the verbatim pack that we sent or received on the
wire. Looking at the on-disk result is often not helpful for
a few reasons:
1. If the operation is a clone, we destroy the repo on
failure, leaving nothing on disk.
2. If the pack is small, we unpack it immediately, and the
full pack never hits the disk.
3. If we feed the pack to "index-pack --fix-thin", the
resulting pack has the extra delta bases added to it.
We already have a GIT_TRACE_PACKET mechanism for tracing
packets. Let's extend it with GIT_TRACE_PACKFILE to dump the
verbatim packfile.
There are a few other positive fallouts that come from
rearranging this code:
- We currently disable the packet trace after seeing the
PACK header, even though we may get human-readable lines
on other sidebands; now we include them in the trace.
- We currently try to print "PACK ..." in the trace to
indicate that the packfile has started. But because we
disable packet tracing, we never printed this line. We
will now do so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git describe does not show 'the most recent tag that is reachable from a
commit', but a descriptive name based on this tag. Fix the description to
reflect that.
Suggested-by: Albert Netymk <albertnetymk@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we have a null-terminated array, it would be useful to convert it
or append it to an argv_array for further manipulation.
Implement argv_array_pushv() which will push a null-terminated array of
strings on to an argv_array.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain git commands, such as git-pull, are simply wrappers around other
git commands like git-fetch, git-merge and git-rebase. As such, these
wrapper commands will typically need to "pass through" command-line
options of the commands they wrap.
Implement the parse_opt_passthru_argv() parse-options callback, which
will reconstruct all the provided command-line options into an
argv_array, such that it can be passed to another git command. This is
useful for passing command-line options that can be specified multiple
times.
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain git commands, such as git-pull, are simply wrappers around other
git commands like git-fetch, git-merge and git-rebase. As such, these
wrapper commands will typically need to "pass through" command-line
options of the commands they wrap.
Implement the parse_opt_passthru() parse-options callback, which will
reconstruct the command-line option into an char* string, such that it
can be passed to another git command.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A config option 'rebase.instructionFormat' can override the
default 'oneline' format of the rebase instruction list.
Since the list is parsed using the left, right or boundary mark plus
the sha1, they are prepended to the instruction format.
Signed-off-by: Michael Rappazzo <rappazzo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"color.diff.plain" was a misnomer; give it 'color.diff.context' as
a more logical synonym.
* jk/color-diff-plain-is-context:
diff.h: rename DIFF_PLAIN color slot to DIFF_CONTEXT
diff: accept color.diff.context as a synonym for "plain"
Allow whitespace breakages in deleted and context lines to be also
painted in the output.
* jc/diff-ws-error-highlight:
diff.c: --ws-error-highlight=<kind> option
diff.c: add emit_del_line() and emit_context_line()
t4015: separate common setup and per-test expectation
t4015: modernise style
reroll count documentation states that v<n> will be pretended to the
filename. Judging by the examples that should have been 'prepended'.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
for_each_ref() callback functions were taught to name the objects
not with "unsigned char sha1[20]" but with "struct object_id".
* bc/object-id: (56 commits)
struct ref_lock: convert old_sha1 member to object_id
warn_if_dangling_symref(): convert local variable "junk" to object_id
each_ref_fn_adapter(): remove adapter
rev_list_insert_ref(): remove unneeded arguments
rev_list_insert_ref_oid(): new function, taking an object_oid
mark_complete(): remove unneeded arguments
mark_complete_oid(): new function, taking an object_oid
clear_marks(): rewrite to take an object_id argument
mark_complete(): rewrite to take an object_id argument
send_ref(): convert local variable "peeled" to object_id
upload-pack: rewrite functions to take object_id arguments
find_symref(): convert local variable "unused" to object_id
find_symref(): rewrite to take an object_id argument
write_one_ref(): rewrite to take an object_id argument
write_refs_to_temp_dir(): convert local variable sha1 to object_id
submodule: rewrite to take an object_id argument
shallow: rewrite functions to take object_id arguments
handle_one_ref(): rewrite to take an object_id argument
add_info_ref(): rewrite to take an object_id argument
handle_one_reflog(): rewrite to take an object_id argument
...
Introduce <branch>@{push} short-hand to denote the remote-tracking
branch that tracks the branch at the remote the <branch> would be
pushed to.
* jk/at-push-sha1:
for-each-ref: accept "%(push)" format
for-each-ref: use skip_prefix instead of starts_with
sha1_name: implement @{push} shorthand
sha1_name: refactor interpret_upstream_mark
sha1_name: refactor upstream_mark
remote.c: add branch_get_push
remote.c: return upstream name from stat_tracking_info
remote.c: untangle error logic in branch_get_upstream
remote.c: report specific errors from branch_get_upstream
remote.c: introduce branch_get_upstream helper
remote.c: hoist read_config into remote_get_1
remote.c: provide per-branch pushremote name
remote.c: hoist branch.*.remote lookup out of remote_get_1
remote.c: drop "remote" pointer from "struct branch"
remote.c: refactor setup of branch->merge list
remote.c: drop default_remote_name variable
The pull.ff configuration was supposed to override the merge.ff
configuration, but it didn't.
* pt/pull-ff-vs-merge-ff:
pull: parse pull.ff as a bool or string
pull: make pull.ff=true override merge.ff
A literal block in the tutorial had lines with unequal lengths to
delimit it from the rest of the document, which choke GitHub's
AsciiDoc renderer.
* ja/tutorial-asciidoctor-fix:
doc: fix unmatched code fences
A literal block in the tutorial had lines with unequal lengths to
delimit it from the rest of the document, which choke GitHub's
AsciiDoc renderer.
* jk/stripspace-asciidoctor-fix:
doc: fix unmatched code fences in git-stripspace
Various documentation mark-up fixes to make the output more
consistent in general and also make AsciiDoctor (an alternative
formatter) happier.
* jk/asciidoc-markup-fix:
doc: convert AsciiDoc {?foo} to ifdef::foo[]
doc: put example URLs and emails inside literal backticks
doc: drop backslash quoting of some curly braces
doc: convert \--option to --option
doc/add: reformat `--edit` option
doc: fix length of underlined section-title
doc: fix hanging "+"-continuation
doc: fix unquoted use of "{type}"
doc: fix misrendering due to `single quote'
Code clean-up for xdg configuration path support.
* pt/xdg-config-path:
path.c: remove home_config_paths()
git-config: replace use of home_config_paths()
git-commit: replace use of home_config_paths()
credential-store.c: replace home_config_paths() with xdg_config_home()
dir.c: replace home_config_paths() with xdg_config_home()
attr.c: replace home_config_paths() with xdg_config_home()
path.c: implement xdg_config_home()
t0302: "unreadable" test needs POSIXPERM
t0302: test credential-store support for XDG_CONFIG_HOME
git-credential-store: support XDG_CONFIG_HOME
git-credential-store: support multiple credential files
The interface to custom low-level merge driver was modeled to be
capable of driving programs like "merge" (from the RCS suite) that
can produce result solely by looking at three files that hold
contents of common ancestor, ours and theirs. The information we
feed to the external drivers via the command line placeholders %O,
%A, and %B were designed to be purely about contents by giving
names of the temporary files that hold these variants without
exposing the original pathname. No matter where the result goes,
merging the same three variants should produce the same result,
contents is the king, that is the Git way.
The external driver interface, however, is meant to help people to
step outside the Git worldview, and sometimes people want to know
the final path that the resulting merged contents would be stored
in. Expose this to the external drivers via a new placeholder %P.
Requested-by: Andreas Gondek
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the am.threeWay configuration variable to use the -3 or --3way
option of git am by default. When am.threeway is set and not desired
for a specific git am command, the --no-3way option can be used to
override it.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While parsing the command-line arguments, git-pull stops parsing at the
first unrecognized option, assuming that any subsequent options are for
git-fetch, and can thus be kept in the shell's positional parameters
list, so that it can be passed to git-fetch via the expansion of "$@".
However, certain functions in git-pull assume that the positional
parameters do not contain any options:
* error_on_no_merge_candidates() uses the number of positional
parameters to determine which error message to print out, and will
thus print the wrong message if git-fetch's options are passed in as
well.
* the call to get_remote_merge_branch() assumes that the positional
parameters only contains the optional repo and refspecs, and will
thus silently fail if git-fetch's options are passed in as well.
* --dry-run is a valid git-fetch option, but if provided after any
git-fetch options, it is not recognized by git-pull and thus git-pull
will continue to run the merge or rebase.
Fix these bugs by teaching git-pull to parse git-fetch's options as
well. Add tests to prevent regressions.
This removes the limitation where git-fetch's options have to come after
git-merge's and git-rebase's options on the command line. Update the
documentation to reflect this.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Logical lines in sendmail aliases files can be spread over multiple
physical lines[1]. A line beginning with whitespace is folded into the
preceding line. A line ending with '\' consumes the following line.
[1]: https://www.freebsd.org/cgi/man.cgi?query=aliases&sektion=5
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sendmail aliases[1] supports expansion to a file ("/path/name") or
pipe ("|command"), as well as file inclusion (":include: /path/name"),
however, our implementation does not support such functionality.
[1]: https://www.freebsd.org/cgi/man.cgi?query=aliases&sektion=5
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Complement existing --show-email option with fallback
configuration variable, with tests.
Signed-off-by: Quentin Neill <quentin.neill@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
