Describe the only <extra> option in `git archive`, that is the compression
level option. Previously this option is only described for zip backend;
add description also for tar backend.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since 'git sparse-checkout' was introduced [1] it is included in
'git --help' in the section "work on the current change" along with
the commands 'add', 'mv', 'restore', and 'rm'. It clearly doesn't
belong to that group, moreover it can't be considered such a common
command to belong to 'git --help' in the first place, so remove it
from there.
[1] 94c0956b60 (sparse-checkout: create builtin with 'list'
subcommand, 2019-11-21)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The implementation of digit-separating single-quotes introduced a
note-worthy regression: the change of a character literal with a
digit would splice the digit and the closing single-quote. For
example, the change from 'a' to '2' is now tokenized as
'[-a'-]{+2'+} instead of '[-a-]{+2+}'.
The options to fix the regression are:
- Tighten the regular expression such that the single-quote can only
occur between digits (that would match the official syntax).
- Remove support for digit separators.
I chose to remove support, because
- I have not seen a lot of code make use of digit separators.
- If code does use digit separators, then the numbers are typically
long. If a change in one of the segments occurs, it is actually
better visible if only that segment is highlighted as the word
that changed instead of the whole long number.
This choice does introduce another minor regression, though, which
is highlighted in the test case: when a change occurs in the second
or later segment of a hexadecimal number where the segment begins
with a digit, but also has letters, the segment is mistaken as
consisting of a number and an identifier. I can live with that.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A refactoring[1] done as part of the recent conversion of
'git submodule add' to builtin, changed the error message
shown when a Git directory already exists locally for a submodule
name. Before the refactoring, the error used to appear like so:
--- START OF OUTPUT ---
$ git submodule add ../sub/ subm
A git directory for 'subm' is found locally with remote(s):
origin /me/git-repos-for-test/sub
If you want to reuse this local git directory instead of cloning again from
/me/git-repos-for-test/sub
use the '--force' option. If the local git directory is not the correct repo
or you are unsure what this means choose another name with the '--name' option.
--- END OF OUTPUT ---
After the refactoring the error started appearing like so:
--- START OF OUTPUT ---
$ git submodule add ../sub/ subm
A git directory for 'subm' is found locally with remote(s): origin /me/git-repos-for-test/sub
fatal: If you want to reuse this local git directory instead of cloning again from
/me/git-repos-for-test/sub
use the '--force' option. If the local git directory is not the correct repo
or if you are unsure what this means, choose another name with the '--name' option.
--- END OF OUTPUT ---
As one could observe the remote information is printed along with the
first line rather than on its own line. Also, there's an additional
newline following output.
Make the error message consistent with the error message that used to be
printed before the refactoring.
This also moves the 'fatal:' prefix that appears in the middle of the
error message to the first line as it would more appropriate to have
it in the first line. The output after the change would look like:
--- START OF OUTPUT ---
$ git submodule add ../sub/ subm
fatal: A git directory for 'subm' is found locally with remote(s):
origin /me/git-repos-for-test/sub
If you want to reuse this local git directory instead of cloning again from
/me/git-repos-for-test/sub
use the '--force' option. If the local git directory is not the correct repo
or you are unsure what this means choose another name with the '--name' option.
--- END OF OUTPUT ---
[1]: https://lore.kernel.org/git/20210710074801.19917-5-raykar.ath@gmail.com/#t
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description section for the command mentions config and reflog
are moved or copied by these options, but the description for these
options did not. Make them match.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When dwim_log() returns the "ref" is always ether NULL or an
xstrdup()'d string.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a missing strbuf_release() and a clear_pathspec() to the
submodule--helper.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At this point in cmd_clone the "git_dir" is always either an
xstrdup()'d string, or something we got from mkpathdup(). Let's free()
it before we clobber it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Free the "path_list" used in builtin/grep.c, it was declared as
STRING_LIST_INIT_NODUP, let's change it to a STRING_LIST_INIT_DUP
since an early user in cmd_grep() appends a string passed via
parse-options.c to it, which needs to be duplicated.
Let's then convert the remaining callers to use
string_list_append_nodup() instead, allowing us to free the list.
This makes all the tests in t7811-grep-open.sh pass, 6/10 would fail
before this change. The only remaining failure would have been due to
a stray "git checkout" (which still leaks memory). In this case we can
use a "git reset --hard" instead, so let's do that, and move the
test_when_finished() above the code that would modify the relevant
file.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Free the "struct object_array" before exiting. This makes grep tests
(e.g. "t7815-grep-binary.sh") a bit happer under SANITIZE=leak.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stylistically fix up code added in bfac23d953 (grep: Fix two memory
leaks, 2010-01-30). We usually don't use the "arg" at all once we've
casted it to the struct we want, let's not do that here when we're
freeing it. Perhaps it was thought that a cast to "void *" would
otherwise be needed?
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in the error() path in handle_path_include(), this
allows us to run t1305-config-include.sh under SANITIZE=leak,
previously 4 tests there would fail. This fixes up a leak in
9b25a0b52e (config: add include directive, 2012-02-06).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "sparse" target needed the GIT-CFLAGS dependency before my
c234e8a0ec (Makefile: make the "sparse" target non-.PHONY,
2021-09-23), but since then it depends on the corresponding *.o files,
which in turn depend on the correct header files, as well as on
GIT-CFLAGS. There's no need to re-state this dependency here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove messages that were last used by the code removed in
a74b35081c (rebase: drop support for `--preserve-merges`,
2021-09-07).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "eval_ngettext()" function has been orphaned since its last user
was removed in a74b35081c (rebase: drop support for
`--preserve-merges`, 2021-09-07).
See b8fc9e43a7 (i18n: rebase-interactive: mark here-doc strings for
translation, 2016-06-17) for the commit that added these
eval_ngettext() wrappers.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a ref_sorting_release() in branch.c to free the memory from the
ref_sorting_options(). This plugs the final in-tree memory leak of
that API.
In the preceding commit the "sorting" variable was left in the
cmd_branch() scope, even though that wasn't needed anymore. Move it to
the "else if (list)" scope instead. We can also move the "struct
string_list" only used for that branch to be declared in that block
That "struct ref_sorting" does not need to be "static" (and isn't
re-used). The "ref_sorting_options()" will return a valid one, we
don't need to make it "static" to have it zero'd out. That it was
static was another artifact of the pre-image of the preceding commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a ref_sorting_release() and use it for some of the current API
users, the ref_sorting_default() function and its siblings will do a
malloc() which wasn't being free'd previously.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change cmd_tag() to free its "struct strbuf"'s instead of using an
UNLEAK() pattern. This changes code added in 886e1084d7 (builtin/:
add UNLEAKs, 2017-10-01).
As shown in the context of the declaration of the "struct
msg_arg" (which I'm changing to use a designated initializer while at
it, and to show the context in this change), that struct is just a
thin wrapper around an int and "struct strbuf".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in 8c32856133 (blame: document --color-* options,
2021-10-08), which added an extra newline before the "+" syntax.
The "Documentation/doc-diff HEAD~ HEAD" output with this applied is:
[...]
@@ -1815,13 +1815,13 @@ CONFIGURATION FILE
specified colors if the line was introduced before the given
timestamp, overwriting older timestamped colors.
- + Instead of an absolute timestamp relative timestamps work as well,
- e.g. 2.weeks.ago is valid to address anything older than 2 weeks.
+ Instead of an absolute timestamp relative timestamps work as well,
+ e.g. 2.weeks.ago is valid to address anything older than 2 weeks.
- + It defaults to blue,12 month ago,white,1 month ago,red, which colors
- everything older than one year blue, recent changes between one month
- and one year old are kept white, and lines introduced within the last
- month are colored red.
+ It defaults to blue,12 month ago,white,1 month ago,red, which
+ colors everything older than one year blue, recent changes between
+ one month and one year old are kept white, and lines introduced
+ within the last month are colored red.
color.blame.repeatedLines
Use the specified color to colorize line annotations for git blame
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The PATH used in CI job may be too wide and let incompatible dlls
to be grabbed, which can cause the build&test to fail. Tighten it.
* js/windows-ci-path-fix:
ci(windows): ensure that we do not pick up random executables
The "--color-lines" and "--color-by-age" options of "git blame"
have been missing, which are now documented.
* bs/doc-blame-color-lines:
blame: document --color-* options
blame: describe default output format
Recent sparse-index work broke safety against attempts to add paths
with trailing slashes to the index, which has been corrected.
* rs/make-verify-path-really-verify-again:
read-cache: let verify_path() reject trailing dir separators again
read-cache: add verify_path_internal()
t3905: show failure to ignore sub-repo
"git cat-file --batch" with the "--batch-all-objects" option is
supposed to iterate over all the objects found in a repository, but
it used to translate these object names using the replace mechanism,
which defeats the point of enumerating all objects in the repository.
This has been corrected.
* jk/cat-file-batch-all-wo-replace:
cat-file: use packed_object_info() for --batch-all-objects
cat-file: split ordered/unordered batch-all-objects callbacks
cat-file: disable refs/replace with --batch-all-objects
cat-file: mention --unordered along with --batch-all-objects
t1006: clean up broken objects
An editor session launched during a Git operation (e.g. during 'git
commit') can leave the terminal in a funny state. The code path
has updated to save the terminal state before, and restore it
after, it spawns an editor.
* cm/save-restore-terminal:
editor: save and reset terminal after calling EDITOR
terminal: teach git how to save/restore its terminal settings
Code clean-up.
* ab/designated-initializers-more:
builtin/remote.c: add and use SHOW_INFO_INIT
builtin/remote.c: add and use a REF_STATES_INIT
urlmatch.[ch]: add and use URLMATCH_CONFIG_INIT
builtin/blame.c: refactor commit_info_init() to COMMIT_INFO_INIT macro
daemon.c: refactor hostinfo_init() to HOSTINFO_INIT macro
"git repack" has been taught to generate multi-pack reachability
bitmaps.
* tb/repack-write-midx:
test-read-midx: fix leak of bitmap_index struct
builtin/repack.c: pass `--refs-snapshot` when writing bitmaps
builtin/repack.c: make largest pack preferred
builtin/repack.c: support writing a MIDX while repacking
builtin/repack.c: extract showing progress to a variable
builtin/repack.c: rename variables that deal with non-kept packs
builtin/repack.c: keep track of existing packs unconditionally
midx: preliminary support for `--refs-snapshot`
builtin/multi-pack-index.c: support `--stdin-packs` mode
midx: expose `write_midx_file_only()` publicly
The "--preserve-merges" option of "git rebase" has been removed.
* js/retire-preserve-merges:
sequencer: restrict scope of a formerly public function
rebase: remove a no-longer-used function
rebase: stop mentioning the -p option in comments
rebase: remove obsolete code comment
rebase: drop the internal `rebase--interactive` command
git-svn: drop support for `--preserve-merges`
rebase: drop support for `--preserve-merges`
pull: remove support for `--rebase=preserve`
tests: stop testing `git rebase --preserve-merges`
remote: warn about unhandled branch.<name>.rebase values
t5520: do not use `pull.rebase=preserve`
The mergesort implementation used to sort linked list has been
optimized.
* rs/mergesort:
test-mergesort: use repeatable random numbers
mergesort: use ranks stack
p0071: test performance of llist_mergesort()
p0071: measure sorting of already sorted and reversed files
test-mergesort: add unriffle_skewed mode
test-mergesort: add unriffle mode
test-mergesort: add generate subcommand
test-mergesort: add test subcommand
test-mergesort: add sort subcommand
test-mergesort: use strbuf_getline()
When a transport helper pushes via send-pack, it passes --helper-status
to get a machine-readable status back for each ref. The previous commit
taught the send-pack code to hand back "error expecting report" if the
server did not send us the proper ref-status. And that's enough to cause
us to recognize that an error occurred for the ref and print something
sensible in our final status table.
But we do interpret these messages on the remote-helper side to turn
them back into REF_STATUS_* enum values. Recognizing this token to turn
it back into REF_STATUS_EXPECTING_REPORT has two advantages:
1. We now print exactly the same message in the human-readable (and
machine-readable --porcelain) output for this situation whether the
transport went through a helper (e.g., http) or not (e.g., ssh).
2. If any code in the helper really cares about distinguishing
EXPECT_REPORT from more generic error conditions, it could now do
so. I didn't find any, so this is mostly future-proofing.
So this is mostly cosmetic for now, but it seems like the
least-surprising thing for the transport-helper code to be doing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing to a server which erroneously omits the final ref-status
report, the client side should complain about the refs for which we
didn't receive the status (because we can't just assume they were
updated). This works over most transports like ssh, but for http we'll
print a very misleading "Everything up-to-date".
It works for ssh because send-pack internally sets the status of each
ref to REF_STATUS_EXPECTING_REPORT, and then if the server doesn't tell
us about a particular ref, it will stay at that value. When we print the
final status table, we'll see that we're still on EXPECTING_REPORT and
complain then.
But for http, we go through remote-curl, which invokes send-pack with
"--stateless-rpc --helper-status". The latter option causes send-pack to
return a machine-readable list of ref statuses to the remote helper. But
ever since its inception in de1a2fdd38 (Smart push over HTTP: client
side, 2009-10-30), the send-pack code has simply omitted mention of any
ref which ended up in EXPECTING_REPORT.
In the remote helper, we then take the absence of any status report
from send-pack to mean that the ref was not even something we tried to
send, and thus it prints "Everything up-to-date". Fortunately it does
detect the eventual non-zero exit from send-pack, and propagates that in
its own non-zero exit code. So at least a careful script invoking "git
push" would notice the failure. But sending the misleading message on
stderr is certainly confusing for humans (not to mention the
machine-readable "push --porcelain" output, though again, any careful
script should be checking the exit code from push, too).
Nobody seems to have noticed because the server in this instance has to
be misbehaving: it has promised to support the ref-status capability
(otherwise the client will not set EXPECTING_REPORT at all), but didn't
send us any. If the connection were simply cut, then send-pack would
complain about getting EOF while trying to read the status. But if the
server actually sends a flush packet (i.e., saying "now you have all of
the ref statuses" without actually sending any), then the client ends up
in this confused situation.
The fix is simple: we should return an error message from "send-pack
--helper-status", just like we would for any other error per-ref error
condition (in the test I included, the server simply omits all ref
status responses, but a more insidious version of this would skip only
some of them).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We read stdout from gpg into a strbuf, then split it into a list of
strbufs, pull out one element, and return it. But we don't free either
the original stdout buffer, nor the list returned from strbuf_split().
This patch fixes both. Note that we have to detach the returned string
from its strbuf before calling strbuf_list_free(), as that would
otherwise throw it away.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We xmemdupz() this buffer, but never free it. Let's do so. We'll use a
cleanup label, since there are multiple exits from the function.
Note that it was also declared a "const char *". We could switch that to
"char *" to indicate that it's allocated, but that make it awkward to
use with skip_prefix(). So instead, we'll introduce an extra non-const
pointer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We run a few operations and make sure they produce identical results
with and without sparse-index; the version we merged to the "next"
branch used the "-q" option to work around a breakage caused by a
version used at Microsoft with some unreleased changes, but since
we would want to make sure the commands produce identical results,
including reports given to the output that lists which commits were
picked, use of "-q" loses too much interesting information.
Let's drop "-q" from the command invocation and revisit the issue
when the problematic changes are upstreamed.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function was added in 4981fe750b (pkt-line: share
buffer/descriptor reading implementation, 2013-02-23), but in
01f9ec64c8 (Use packet_reader instead of packet_read_line,
2018-12-29) the code that was using it was removed.
Since it's being removed we can in turn remove the "src" and "src_len"
arguments to packet_read(), all the remaining users just passed a
NULL/NULL pair to it.
That function is only a thin wrapper for packet_read_with_status()
which still needs those arguments, but for the thin packet_read()
convenience wrapper we can do away with it for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function was added in f1f4d8acf4 (pkt-line: add
packet_buf_write_len function, 2018-03-15) for use in
0f1dc53f45 (remote-curl: implement stateless-connect command,
2018-03-15).
In a97d00799a (remote-curl: use post_rpc() for protocol v2 also,
2019-02-21) that only user of it went away, let's remove it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a MIDX, we atomically move the new MIDX into place via
commit_lock_file(), but do not check to see if that call was successful.
Make sure that we do check in order to prevent us from incorrectly
reporting that we wrote a new MIDX if we actually encountered an error.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply similar treatment as in the last commit to the MIDX `repack`
operation.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before a new MIDX can be written, expire_midx_packs() first loads the
existing MIDX, figures out which packs can be expired, and then writes a
new MIDX based on that information.
In order to load the existing MIDX, it uses load_multi_pack_index(),
which mmaps the multi-pack-index file, but does not store the resulting
`struct multi_pack_index *` in the object store.
write_midx_internal() also needs to open the existing MIDX, and it does
so by iterating the results of get_multi_pack_index(), so that it reuses
the same pointer held by the object store. But before it can move the
new MIDX into place, it close_object_store() to munmap() the
multi-pack-index file to accommodate platforms like Windows which don't
allow overwriting files which are memory mapped.
That's where things get weird. Since expire_midx_packs has its own
*separate* memory mapped copy of the MIDX, the MIDX file is still memory
mapped! Interestingly, this doesn't seem to cause a problem in our
tests. (I believe that this has much more to do with my own lack of
familiarity with Windows than it does a lack of coverage in our tests).
In any case, we can side-step the whole issue by teaching
expire_midx_packs() to use the `struct multi_pack_index` pointer it
found via the object store instead of maintain its own copy. That way,
when write_midx_internal() calls `close_object_store()`, we know that
there are no memory mapped copies of the MIDX laying around.
A couple of other small notes about this patch:
- As far as I can tell, passing `local == 1` to the call to
load_multi_pack_index() was an error, since object_dir could be an
alternate. But it doesn't matter, since even though we write
`m->local = 1`, we never read that field back later on.
- Setting `m = NULL` after write_midx_internal() was likely to prevent
a double-free back from when that function took a `struct
multi_pack_index *` that it called close_midx() on itself. We can
rely on write_midx_internal() to call that for us now.
Finally, this enforces the same "the value of --object-dir must be the
local object store, or an alternate" rule from f57a739691 (midx: avoid
opening multiple MIDXs when writing, 2021-09-01) to the `expire`
sub-command, too.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first thing that write_midx_internal() does is load the MIDX
corresponding to the given object directory, if one is present.
Prepare for other functions in midx.c to do the same thing by extracting
that operation out to a small helper function.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tb/repack-write-midx:
test-read-midx: fix leak of bitmap_index struct
builtin/repack.c: pass `--refs-snapshot` when writing bitmaps
builtin/repack.c: make largest pack preferred
builtin/repack.c: support writing a MIDX while repacking
builtin/repack.c: extract showing progress to a variable
builtin/repack.c: rename variables that deal with non-kept packs
builtin/repack.c: keep track of existing packs unconditionally
midx: preliminary support for `--refs-snapshot`
builtin/multi-pack-index.c: support `--stdin-packs` mode
midx: expose `write_midx_file_only()` publicly
Speed up the "lint-docs" target by making it non-.PHONY. Similar to my
c234e8a0ec (Makefile: make the "sparse" target non-.PHONY,
2021-09-23). We'll now create empty files corresponding to a
dependency graph for each of these lint scripts.
This speeds things up a bit[1], and makes the output correspond to any
in-tree changes we have:
$ touch git-add.txt; make lint-docs; make lint-docs
GEN cmd-list.made
GEN doc.dep
LINT GITLINK git-add.txt
LINT MAN END git-add.txt
LINT MAN SEC git-add.txt
make: Nothing to be done for 'lint-docs'.
As with the "sparse" target changes this has a hard dependency on the
use of ".DELETE_ON_ERROR" in the Makefile, added here in
db10fc6c09 (doc: simplify Makefile using .DELETE_ON_ERROR,
2021-05-21). This method also depends on the output for us emitting
any errors on STDERR (fixed in a preceding commit), as well us these
scripts exiting with non-zero on any errors (which they were already
doing).
1.
$ git show HEAD~:Documentation/Makefile >Makefile.old
$ hyperfine --warmup 2 -L f ",.old" 'make -j1 -f Makefile{f} lint-docs'
Benchmark #1: make -j1 -f Makefile lint-docs
Time (mean ± σ): 60.8 ms ± 1.4 ms [User: 58.7 ms, System: 2.5 ms]
Range (min … max): 58.9 ms … 64.0 ms 48 runs
Benchmark #2: make -j1 -f Makefile.old lint-docs
Time (mean ± σ): 84.0 ms ± 1.5 ms [User: 78.6 ms, System: 5.7 ms]
Range (min … max): 81.8 ms … 87.8 ms 35 runs
Summary
'make -j1 -f Makefile lint-docs' ran
1.38 ± 0.04 times faster than 'make -j1 -f Makefile.old lint-docs'
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the trick we use to speed up the "clean" target to also extend
to the "lint-docs" target. See 54df87555b (Documentation/Makefile:
conditionally include doc.dep, 2020-12-08) for the "clean"
implementation.
The "doc-lint" target only depends on *.txt files, so we don't need to
generate GIT-VERSION-FILE etc. if that's all we're doing. This makes
the "make lint-docs" target more than 2x as fast:
$ git show HEAD~:Documentation/Makefile >Makefile.old
$ hyperfine -L f ",.old" 'make -f Makefile{f} lint-docs'
Benchmark #1: make -f Makefile lint-docs
Time (mean ± σ): 100.2 ms ± 1.3 ms [User: 93.7 ms, System: 6.7 ms]
Range (min … max): 98.4 ms … 103.1 ms 29 runs
Benchmark #2: make -f Makefile.old lint-docs
Time (mean ± σ): 220.0 ms ± 20.0 ms [User: 206.0 ms, System: 18.0 ms]
Range (min … max): 206.6 ms … 267.5 ms 11 runs
Summary
'make -f Makefile lint-docs' ran
2.19 ± 0.20 times faster than 'make -f Makefile.old lint-docs'
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Have all of the scripts invoked by "make check-docs" emit their output
on STDERR. This does not currently matter due to the way we're
invoking them, but will in a subsequent change. It's a good idea to do
this in any case for consistency with other tools we invoke.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the broken "make lint-docs" (or "make check-docs" at the
top-level) target, which has been broken since my cafd9828e8 (doc
lint: lint and fix missing "GIT" end sections, 2021-04-09).
The CI for "seen" is emitting an error about a broken gitlink, but due
to there being 3x scripts chained via ";" instead of "&&" we're not
carrying forward the non-zero exit code.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 459b8d22e5 (tests: do not borrow from COPYING and README from the
real source, 2015-02-15) tests that used "lib-diff.sh" (called
"diff-lib.sh" then) were made to stop relying on the top-level COPYING
file, but we still had other tests that referenced it.
Let's move them over to use the "COPYING_test_data" utility function
introduced in the preceding commit, and in the case of the one test
that needed the "README" file use a ROT 13 version of that "COPYING"
test data. That test added in afd222967c (Extend testing git-mv for
renaming of subdirectories, 2006-07-26) just needs more test data that's not the same as the "COPYING" test data, so a ROT 13 version will do.
This change removes the last references to ../{README,COPYING} in the
test suite.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow-up the change in 459b8d22e5 (tests: do not borrow from COPYING
and README from the real source, 2015-02-15) by not shipping a full
copy of older versions of the top-level "COPYING" and "README" files.
The tests that use them just need the small blurb at the top of
"COPYING" as test data, or mock data that's dissimilar. Let's provide
that with a "COPYING_test_data" function instead.
We're not replacing this with some other generic test
data (e.g. "lorum ipsum") because these tests require test file header
to be the old "COPYING" file. See e.g. "t4003-diff-rename-1.sh" which
changes the file, and then does full "test_cmp" comparisons on the
resulting "git diff" output.
This change only changes tests that used the "lib-diff.sh" library,
but splits up what they need into a new "lib-diff-data.sh". A
subsequent commit will change related tests that were missed in
459b8d22e5.
For the test in "t4008-diff-break-rewrite.sh" the "README" file can go
away in favor of echoing the line "some dissimilar content" to a file
in the one test that needed it.
The point of that test is to start with files "A" and "B", and then
have A be more similar to the state of "B" than to its old version (by
copying over the content from the "COPYING" file). Just comparing the
pre-image of "some dissimilar content" and later a munged version of
the "COPYING" output serves that purpose.
While we're at it get rid of a stray "echo $tree" debugging line added
in 15d061b435 ([PATCH] Fix the way diffcore-rename records unremoved
source., 2005-05-27), and stop calling "hash-object" to get the hash
of an object we've just added to the index. We can instead extract
that information from the index itself with "rev-parse".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
