In some cases, horizontal lines in rendered graphs can lose their
coloring. This is due to a use of graph_line_addch() instead of
graph_line_write_column(). Using a ternary operator to pick the
character is nice for compact code, but we actually need a column to
provide the color.
Add a test to t4215-log-skewed-merges.sh to prevent regression.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git log --graph" shows a merge commit that has two collapsing
lines, like:
| | | | *
| |_|_|/|
|/| | |/
| | |/|
| |/| |
| * | |
* | | |
we trigger an assert():
graph.c:1228: graph_output_collapsing_line: Assertion
`graph->mapping[i - 3] == target' failed.
The assert was introduced by eaf158f8 ("graph API: Use horizontal
lines for more compact graphs", 2009-04-21), which is quite old.
This assert is trying to say that when we complete a horizontal
line with a single slash, it is because we have reached our target.
It is actually the _second_ collapsing line that hits this assert.
The reason we are in this code path is because we are collapsing
the first line, and in that case we are hitting our target now
that the horizontal line is complete. However, the second line
cannot be a horizontal line, so it will collapse without horizontal
lines. In this case, it is inappropriate to assert that we have
reached our target, as we need to continue for another column
before reaching the target. Dropping the assert is safe here.
The new behavior in 0f0f389f12 (graph: tidy up display of
left-skewed merges, 2019-10-15) caused the behavior change that
made this assertion failure possible. In addition to making the
assert possible, it also changed how multiple edges collapse.
In a larger example, the current code will output a collapse
as follows:
| | | | | | *
| |_|_|_|_|/|\
|/| | | | |/ /
| | | | |/| /
| | | |/| |/
| | |/| |/|
| |/| |/| |
| | |/| | |
| | * | | |
However, the intended collapse should allow multiple horizontal lines
as follows:
| | | | | | *
| |_|_|_|_|/|\
|/| | | | |/ /
| | |_|_|/| /
| |/| | | |/
| | | |_|/|
| | |/| | |
| | * | | |
This behavior is not corrected by this change, but is noted for a later
update.
Helped-by: Jeff King <peff@peff.net>
Reported-by: Bradley Smith <brad@brad-smith.co.uk>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* hw/doc-in-header:
trace2: move doc to trace2.h
submodule-config: move doc to submodule-config.h
tree-walk: move doc to tree-walk.h
trace: move doc to trace.h
run-command: move doc to run-command.h
parse-options: add link to doc file in parse-options.h
credential: move doc to credential.h
argv-array: move doc to argv-array.h
cache: move doc to cache.h
sigchain: move doc to sigchain.h
pathspec: move doc to pathspec.h
revision: move doc to revision.h
attr: move doc to attr.h
refs: move doc to refs.h
remote: move doc to remote.h and refspec.h
sha1-array: move doc to sha1-array.h
merge: move doc to ll-merge.h
graph: move doc to graph.h and graph.c
dir: move doc to dir.h
diff: move doc to diff.h and diffcore.h
Correct unintentional duplication(s) of words, such as "the the",
and "can can" etc.
The changes are only applied to cases where it's fixing what is clearly
wrong or prone to misunderstanding, as suggested by the reviewers.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Denton Liu <liu.denton@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: ryenus <ryenus@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the documentation from Documentation/technical/api-history-graph.txt to
graph.h and graph.c as it's easier for the developers to find the usage
information beside the code instead of looking for it in another doc file.
The graph library was already well documented, so few comments were added to
both graph.h and graph.c
Also documentation/technical/api-history-graph.txt is removed because
the information it has is now redundant and it'll be hard to keep it up to
date and synchronized with the documentation in the header file.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 04005834ed ("log: fix coloring of certain octopus merge shapes",
2018-09-01) there is a fix for the coloring of dashes following an
octopus merge. It makes a distinction between the case where all parents
introduce a new column, versus the case where the first parent collapses
into an existing column:
| *-. | *-.
| |\ \ | |\ \
| | | | |/ / /
The latter case means that the columns for the merge parents begin one
place to the left in the `new_columns` array compared to the former
case.
However, the implementation only works if the commit's parents are kept
in order as they map onto the visual columns, as we get the colors by
iterating over `new_columns` as we print the dashes. In general, the
commit's parents can arbitrarily merge with existing columns, and change
their ordering in the process.
For example, in the following diagram, the number of each column
indicates which commit parent appears in each column.
| | *---.
| | |\ \ \
| | |/ / /
| |/| | /
| |_|_|/
|/| | |
3 1 0 2
If the columns are colored (red, green, yellow, blue), then the dashes
will currently be colored yellow and blue, whereas they should be blue
and red.
To fix this, we need to look up each column in the `mapping` array,
which before the `GRAPH_COLLAPSING` state indicates which logical column
is displayed in each visual column. This implementation is simpler as it
doesn't have any edge cases, and it also handles how left-skewed first
parents are now displayed:
| *-.
|/|\ \
| | | |
0 1 2 3
The color of the first dashes is always the color found in `mapping` two
columns to the right of the commit symbol. Because commits are displayed
after all edges have been collapsed together and the visual columns
match the logical ones, we can find the visual offset of the commit
symbol using `commit_index`.
Signed-off-by: James Coglan <jcoglan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a merge commit is printed and its final parent is the same commit
that occupies the column to the right of the merge, this results in a
kink in the displayed edges:
* |
|\ \
| |/
| *
Graphs containing these shapes can be hard to read, as the expansion to
the right followed immediately by collapsing back to the left creates a
lot of zig-zagging edges, especially when many columns are present.
We can improve this by eliminating the zig-zag and having the merge's
final parent edge fuse immediately with its neighbor:
* |
|\|
| *
This reduces the horizontal width for the current commit by 2, and
requires one less row, making the graph display more compact. Taken in
combination with other graph-smoothing enhancements, it greatly
compresses the space needed to display certain histories:
*
|\
| * *
| |\ |\
| | * | *
| | | | |\
| | \ | | *
| *-. \ | * |
| |\ \ \ => |/|\|
|/ / / / | | *
| | | / | * |
| | |/ | |/
| | * * /
| * | |/
| |/ *
* |
|/
*
One of the test cases here cannot be correctly rendered in Git v2.23.0;
it produces this output following commit E:
| | *-. \ 5_E
| | |\ \ \
| |/ / / /
| | | / _
| |_|/
|/| |
The new implementation makes sure that the rightmost edge in this
history is not left dangling as above.
Signed-off-by: James Coglan <jcoglan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a graph contains edges that are in the process of collapsing to the
left, but those edges cross a commit line, the effect is that the edges
have a jagged appearance:
*
|\
| *
| \
*-. \
|\ \ \
| | * |
| * | |
| |/ /
* | |
|/ /
* |
|/
*
We already takes steps to smooth edges like this when they're expanding;
when an edge appears to the right of a merge commit marker on a
GRAPH_COMMIT line immediately following a GRAPH_POST_MERGE line, we
render it as a `\`:
* \
|\ \
| * \
| |\ \
We can make a similar improvement to collapsing edges, making them
easier to follow and giving the overall graph a feeling of increased
symmetry:
*
|\
| *
| \
*-. \
|\ \ \
| | * |
| * | |
| |/ /
* / /
|/ /
* /
|/
*
To do this, we introduce a new special case for edges on GRAPH_COMMIT
lines that immediately follow a GRAPH_COLLAPSING line. By retaining a
copy of the `mapping` array used to render the GRAPH_COLLAPSING line in
the `old_mapping` array, we can determine that an edge is collapsing
through the GRAPH_COMMIT line and should be smoothed.
Signed-off-by: James Coglan <jcoglan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The change I'm about to make requires being able to inspect the mapping
array that was used to render the last GRAPH_COLLAPSING line while
rendering a GRAPH_COMMIT line. The `new_mapping` array currently exists
as a pre-allocated space for computing the next `mapping` array during
`graph_output_collapsing_line()`, but we can repurpose it to let us see
the previous `mapping` state.
To support this use it will make more sense if this array is named
`old_mapping`, as it will contain the mapping data for the previous line
we rendered, at the point we're rendering a commit line.
Signed-off-by: James Coglan <jcoglan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following the introduction of "left-skewed" merges, which are merges
whose first parent fuses with another edge to its left, we have some
more edge cases to deal with in the display of commit and post-merge
lines.
The current graph code handles the following cases for edges appearing
to the right of the commit (*) on commit lines. A 2-way merge is usually
followed by vertical lines:
| | |
| * |
| |\ \
An octopus merge (more than two parents) is always followed by edges
sloping to the right:
| | \ | | \
| *-. \ | *---. \
| |\ \ \ | |\ \ \ \
A 2-way merge is followed by a right-sloping edge if the commit line
immediately follows a post-merge line for a commit that appears in the
same column as the current commit, or any column to the left of that:
| * | * |
| |\ | |\ \
| * \ | | * \
| |\ \ | | |\ \
This commit introduces the following new cases for commit lines. If a
2-way merge skews to the left, then the edges to its right are always
vertical lines, even if the commit follows a post-merge line:
| | | | |\
| * | | * |
|/| | |/| |
A commit with 3 parents that skews left is followed by vertical edges:
| | |
| * |
|/|\ \
If a 3-way left-skewed merge commit appears immediately after a
post-merge line, then it may be followed the right-sloping edges, just
like a 2-way merge that is not skewed.
| |\
| * \
|/|\ \
Octopus merges with 4 or more parents that skew to the left will always
be followed by right-sloping edges, because the existing columns need to
expand around the merge.
| | \
| *-. \
|/|\ \ \
On post-merge lines, usually all edges following the current commit
slope to the right:
| * | |
| |\ \ \
However, if the commit is a left-skewed 2-way merge, the edges to its
right remain vertical. We also need to display a space after the
vertical line descending from the commit marker, whereas this line would
normally be followed by a backslash.
| * | |
|/| | |
If a left-skewed merge has more than 2 parents, then the edges to its
right are still sloped as they bend around the edges introduced by the
merge.
| * | |
|/|\ \ \
To handle these new cases, we need to know not just how many parents
each commit has, but how many new columns it adds to the display; this
quantity is recorded in the `edges_added` field for the current commit,
and `prev_edges_added` field for the previous commit.
Here, "column" refers to visual columns, not the logical columns of the
`columns` array. This is because even if all the commit's parents end up
fusing with existing edges, they initially introduce distinct edges in
the commit and post-merge lines before those edges collapse. For
example, a 3-way merge whose 2nd and 3rd parents fuse with existing
edges still introduces 2 visual columns that affect the display of edges
to their right.
| | | \
| | *-. \
| | |\ \ \
| |_|/ / /
|/| | / /
| | |/ /
| |/| |
| | | |
This merge does not introduce any *logical* columns; there are 4 edges
before and after this commit once all edges have collapsed. But it does
initially introduce 2 new edges that need to be accommodated by the
edges to their right.
Signed-off-by: James Coglan <jcoglan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when we display a merge whose first parent is already present
in a column to the left of the merge commit, we display the first parent
as a vertical pipe `|` in the GRAPH_POST_MERGE line and then immediately
enter the GRAPH_COLLAPSING state. The first-parent line tracks to the
left and all the other parent lines follow it; this creates a "kink" in
those lines:
| *---.
| |\ \ \
|/ / / /
| | | *
This change tidies the display of such commits such that if the first
parent appears to the left of the merge, we render it as a `/` and the
second parent as a `|`. This reduces the horizontal and vertical space
needed to render the merge, and makes the resulting lines easier to
read.
| *-.
|/|\ \
| | | *
If the first parent is separated from the merge by several columns, a
horizontal line is drawn in a similar manner to how the GRAPH_COLLAPSING
state displays the line.
| | | *-.
| |_|/|\ \
|/| | | | *
This effect is applied to both "normal" two-parent merges, and to
octopus merges. It also reduces the vertical space needed for pre-commit
lines, as the merge occupies one less column than usual.
Before: After:
| * | *
| |\ | |\
| | \ | * \
| | \ |/|\ \
| *-. \
| |\ \ \
Signed-off-by: James Coglan <jcoglan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This computation is repeated in a couple of places and I need to add
another condition to it to implement a further improvement to the graph
rendering, so I'm extracting this into a function.
Signed-off-by: James Coglan <jcoglan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's a duplication of logic between `graph_insert_into_new_columns()`
and `graph_update_width()`. `graph_insert_into_new_columns()` is called
repeatedly by `graph_update_columns()` with an `int *` that tracks the
offset into the `mapping` array where we should write the next value.
Each call to `graph_insert_into_new_columns()` effectively pushes one
column index and one "null" value (-1) onto the `mapping` array and
therefore increments `mapping_idx` by 2.
`graph_update_width()` duplicates this process: the `width` of the graph
is essentially the initial width of the `mapping` array before edges
begin collapsing. The `graph_update_width()` function's logic
effectively works out how many times `graph_insert_into_new_columns()`
was called based on the relationship of the current commit to the rest
of the graph.
I'm about to make some changes that make the assignment of values into
the `mapping` array more complicated. Rather than make
`graph_update_width()` more complicated at the same time, we can simply
remove this function and use `graph->width` to track the offset into the
`mapping` array as we're building it. This removes the duplication and
makes sure that `graph->width` is the same as the visual width of the
`mapping` array once `graph_update_columns()` is complete.
Signed-off-by: James Coglan <jcoglan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I will shortly be making some changes to this function and so am trying
to simplify it. It currently contains some duplicated logic; both
branches the function can take assign the commit's column index into
the `mapping` array and increment `mapping_index`.
Here I change the function so that the only conditional behaviour is
that it appends the commit to `new_columns` if it's not present. All
manipulation of `mapping` now happens on a single code path.
Signed-off-by: James Coglan <jcoglan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I will shortly be making some changes to
`graph_insert_into_new_columns()` and so am trying to simplify it. One
possible simplification is that we can extract the loop for finding the
element in `new_columns` containing the given commit.
`find_new_column_by_commit()` contains a very similar loop but it
returns a `struct column *` rather than an `int` offset into the array.
Here I'm introducing a version that returns `int` and using that in
`graph_insert_into_new_columns()` and `graph_output_post_merge_line()`.
Signed-off-by: James Coglan <jcoglan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the display width of graph lines is implicitly tracked via the
`graph_line` interface, the calls to `graph_pad_horizontally()` no
longer need to be located inside the individual output functions, where
the character counting was previously being done.
All the functions called by `graph_next_line()` generate a line of
output, then call `graph_pad_horizontally()`, and finally change the
graph state if necessary. As padding is the final change to the output
done by all these functions, it can be removed from all of them and done
in `graph_next_line()` instead.
I've also moved the guard in `graph_output_padding_line()` that checks
the graph has a commit; this function is only called by
`graph_next_line()` and we must not pad the `graph_line` if no commit is
set.
Signed-off-by: James Coglan <jcoglan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All the output functions called by `graph_next_line()` currently keep
track of how many printable chars they've written to the buffer, before
calling `graph_pad_horizontally()` to pad the line with spaces. Some
functions do this by incrementing a counter whenever they write to the
buffer, and others do it by encoding an assumption about how many chars
are written, as in:
graph_pad_horizontally(graph, sb, graph->num_columns * 2);
This adds a fair amount of noise to the functions' logic and is easily
broken if one forgets to increment the right counter or update the
calculations used for padding.
To make this easier to use, I'm introducing a new struct called
`graph_line` that wraps a `strbuf` and keeps count of its display width
implicitly. `graph_next_line()` wraps this around the `struct strbuf *`
it's given and passes a `struct graph_line *` to the output functions,
which use its interface.
The `graph_line` interface wraps the `strbuf_addch()`,
`strbuf_addchars()` and `strbuf_addstr()` functions, and adds the
`graph_line_write_column()` function for adding a single character with
color formatting. The `graph_pad_horizontally()` function can then use
the `width` field from the struct rather than taking a character count
as a parameter.
Signed-off-by: James Coglan <jcoglan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --graph" showing an octopus merge sometimes miscounted the
number of display columns it is consuming to show the merge and its
parent commits, which has been corrected.
* np/log-graph-octopus-fix:
log: fix coloring of certain octopus merge shapes
For octopus merges where the first parent edge immediately merges into
the next column to the left, the number of columns should be one less
than the usual case.
First parent to the left case:
| *-.
| |\ \
|/ / /
The usual case:
| *-.
| |\ \
| | | *
Also refactor the code to iterate over columns rather than dashes,
building from an initial patch suggested by Jeff King.
Signed-off-by: Noam Postavsky <npostavs@users.sourceforge.net>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
strbuf_addf() can be used to add a specific number of space characters
by using the format "%*s" with an empty string and specifying the
desired width. Use strbuf_addchars() instead as it's shorter, makes the
intent clearer and is a bit more efficient.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people feel the default set of colors used by "git log --graph"
rather limiting. A mechanism to customize the set of colors has
been introduced.
* nd/log-graph-configurable-colors:
document behavior of empty color name
color_parse_mem: allow empty color spec
log --graph: customize the graph lines with config log.graphColors
color.c: trim leading spaces in color_parse_mem()
color.c: fix color_parse_mem() with value_len == 0
Exchange the values of graph->columns and graph->new_columns using the
macro SWAP instead of hand-rolled code. The result is shorter and
easier to read.
This transformation was not done by the semantic patch swap.cocci
because there's an unrelated statement between the second and the last
step of the exchange, so it didn't match the expected pattern.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the semantic patch swap.cocci to convert hand-rolled swaps to use
the macro SWAP. The resulting code is shorter and easier to read, the
object code is effectively unchanged.
The patch for object.c had to be hand-edited in order to preserve the
comment before the change; Coccinelle tried to eat it for some reason.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have a 256 colors terminal (or one with true color support), then
the predefined 12 colors seem limited. On the other hand, you don't want
to draw graph lines with every single color in this mode because the two
colors could look extremely similar. This option allows you to hand pick
the colors you want.
Even with standard terminal, if your background color is neither black
or white, then the graph line may match your background and become
hidden. You can exclude your background color (or simply the colors you
hate) with this.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "graph" API used in "git log --graph" miscounted the number of
output columns consumed so far when drawing a padding line, which
has been fixed; this did not affect any existing code as nobody
tried to write anything after the padding on such a line, though.
* jk/graph-padding-fix:
graph: fix extra spaces in graph_padding_line
The graph_padding_line() function outputs a series of "|"
columns, and then pads with spaces to graph->width by
calling graph_pad_horizontally(). However, we tell the
latter that we wrote graph->num_columns characters, which is
not true; we also needed spaces between the columns. Let's
keep a count of how many characters we've written, which is
what all the other callers of graph_pad_horizontally() do.
Without this, any output that is written at the end of a
padding line will be bumped out by at least an extra
graph->num_columns spaces. Presumably nobody ever noticed
the bug because there's no code path that actually writes to
the end of a padding line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an extension to git-diff and git-log (and any other graph-aware
displayable output) such that "--line-prefix=<string>" will print the
additional line-prefix on every line of output.
To make this work, we have to fix a few bugs in the graph API that force
graph_show_commit_msg to be used only when you have a valid graph.
Additionally, we extend the default_diff_output_prefix handler to work
even when no graph is enabled.
This is somewhat of a hack on top of the graph API, but I think it
should be acceptable here.
This will be used by a future extension of submodule display which
displays the submodule diff as the actual diff between the pre and post
commit in the submodule project.
Add some tests for both git-log and git-diff to ensure that the prefix
is honored correctly.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"diff/log --stat" has a logic that determines the display columns
available for the diffstat part of the output and apportions it for
pathnames and diffstat graph automatically.
5e71a84a (Add output_prefix_length to diff_options, 2012-04-16)
added the output_prefix_length field to diff_options structure to
allow this logic to subtract the display columns used for the
history graph part from the total "terminal width"; this matters
when the "git log --graph -p" option is in use.
The field must be set to the number of display columns needed to
show the output from the output_prefix() callback, which is error
prone. As there is only one user of the field, and the user has the
actual value of the prefix string, let's get rid of the field and
have the user count the display width itself.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commands in the "log/diff" family have had an FILE* pointer in the
data structure they pass around for a long time, but some codepaths
used to always write to the standard output. As a preparatory step
to make "git format-patch" available to the internal callers, these
codepaths have been updated to consistently write into that FILE*
instead.
* js/log-to-diffopt-file:
mingw: fix the shortlog --output=<file> test
diff: do not color output when --color=auto and --output=<file> is given
t4211: ensure that log respects --output=<file>
shortlog: respect the --output=<file> setting
format-patch: use stdout directly
format-patch: avoid freopen()
format-patch: explicitly switch off color when writing to files
shortlog: support outputting to streams other than stdout
graph: respect the diffopt.file setting
line-log: respect diffopt's configured output file stream
log-tree: respect diffopt's configured output file stream
log: prepare log/log-tree to reuse the diffopt.close_file attribute
When the caller overrides diffopt.file (which defaults to stdout),
the diff machinery already redirects its output, and the graph display
should also write to that file.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass graph width to pretty formatting, to make N in '%>|(N)'
include columns consumed by graph rendered when --graph option
is in use.
For example, in the output of
git log --all --graph --pretty='format: [%>|(20)%h] %ar%d'
this change will make all commit hashes align at 20th column from
the edge of the terminal, not from the edge of the graph.
Signed-off-by: Josef Kufner <josef@kufner.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of these cases can be converted to use ALLOC_ARRAY or
REALLOC_ARRAY, which has two advantages:
1. It automatically checks the array-size multiplication
for overflow.
2. It always uses sizeof(*array) for the element-size,
so that it can never go out of sync with the declared
type of the array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Deduplicate code common to both branches of if statements.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When drawing the graph of an octopus merge, we draw a horizontal line
from parents 3 and above into the asterisk representing the commit. The
sections of this line should be colored to match the graph lines coming
in from above.
However, if the commit is not in the left-most column we do not take
into account the columns to the left of the commit when calculating
these colors. Fix this by adding the appropriate offset to the column
index used for calculating the color.
Signed-off-by: Hemmo Nieminen <hemmo.nieminen@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit ba35480439.
CGit uses these symbols to output the correct HTML around graph
elements. Making these symbols private means that CGit cannot be
updated to use Git 1.8.0 or newer, so let's not do that.
On top of the revert, also add comments so that we avoid reintroducing
this problem in the future and suggest to those modifying this API
that they might want to discuss it with the CGit developers.
Signed-off-by: John Keeping <john@keeping.me.uk>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When showing merges in git-log, the same commit is shown once for each
parent. Combined with "--graph" this results in graph_show_commit()
being called once for each parent without graph_update() being called.
Currently graph_show_commit() does not print anything on subsequent
invocations for the same commit (this was changed by commit 656197a -
"graph.c: infinite loop in git whatchanged --graph -m" from the previous
behaviour of looping infinitely).
Change this so that if the graph code believes it has already shown the
commit it prints a single padding line.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running "whatchanged --graph -m" on a simple two-head merges
can fall into infinite loop.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add output_prefix_length to diff_options. Initialize the value to 0 and only
set it when graph.c:diff_output_prefix_callback() is called.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we read a color value either from a config file or from
the command line, we use git_config_colorbool to convert it
from the tristate always/never/auto into a single yes/no
boolean value.
This has some timing implications with respect to starting
a pager.
If we start (or decide not to start) the pager before
checking the colorbool, everything is fine. Either isatty(1)
will give us the right information, or we will properly
check for pager_in_use().
However, if we decide to start a pager after we have checked
the colorbool, things are not so simple. If stdout is a tty,
then we will have already decided to use color. However, the
user may also have configured color.pager not to use color
with the pager. In this case, we need to actually turn off
color. Unfortunately, the pager code has no idea which color
variables were turned on (and there are many of them
throughout the code, and they may even have been manipulated
after the colorbool selection by something like "--color" on
the command line).
This bug can be seen any time a pager is started after
config and command line options are checked. This has
affected "git diff" since 89d07f7 (diff: don't run pager if
user asked for a diff style exit code, 2007-08-12). It has
also affect the log family since 1fda91b (Fix 'git log'
early pager startup error case, 2010-08-24).
This patch splits the notion of parsing a colorbool and
actually checking the configuration. The "use_color"
variables now have an additional possible value,
GIT_COLOR_AUTO. Users of the variable should use the new
"want_color()" wrapper, which will lazily determine and
cache the auto-color decision.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This lets us store more than just a bit flag for whether we
want color; we can also store whether we want automatic
colors. This can be useful for making the automatic-color
decision closer to the point of use.
This mostly just involves replacing DIFF_OPT_* calls with
manipulations of the flag. The biggest exception is that
calls to DIFF_OPT_TST must check for "o->use_color > 0",
which lets an "unknown" value (i.e., the default) stay at
"no color". In the previous code, a value of "-1" was not
propagated at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also adds the new colors to show-branch that were added a while
back for graph output.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, we have identical code for generating revision marks ('<',
'>', '-') in 5 places.
Factor out the code to a single function get_revision_mark() for easier
maintenance and extensibility.
Note that the check for !!revs in graph.c (which gets removed
effectively by this patch) is superfluous.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
