* jn/test-sanitize-git-env:
tests: scrub environment of GIT_* variables
config: drop support for GIT_CONFIG_NOGLOBAL
gitattributes: drop support for GIT_ATTR_NOGLOBAL
tests: suppress system gitattributes
tests: stop worrying about obsolete environment variables
* jc/maint-fetch-alt:
fetch-pack: objects in our alternates are available to us
refs_from_alternate: helper to use refs from alternates
Conflicts:
builtin/receive-pack.c
When there are too many paths in the project, the number of rename source
candidates "git diff -C -C" finds will exceed the rename detection limit,
and no inexact rename detection is performed. We however could fall back
to "git diff -C" if the number of modified paths is sufficiently small.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.7.4.2
Work around broken ln on solaris as used in t8006
t/README: Add a note about running commands under valgrind
* so/submodule-no-update-first-time:
t7406: "git submodule update {--merge|--rebase]" with new submodules
submodule: no [--merge|--rebase] when newly cloned
The test setup in t8006-blame-textconv.sh uses "ln -sf" to
overwrite an existing symlink. Unfortunately, both /usr/bin/ln
and /usr/xpg4/bin/ln on solaris 9 don't properly handle -f and -s
used at the same time. This caused the test setup and subsequent
checks to fail.
Instead, remove the symlink and then create a new one in the
setup code.
The upstream Solaris bug (fixed in 10, but not 9) is documented
here:
http://bugs.opensolaris.org/view_bug.do?bug_id=4372462
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[jc: moved "cd subdir" inside subshell and fixed comparison with expected]
Signed-off-by: Piotr Krukowiecki <piotr.krukowiecki@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test suite runs valgrind with certain options activated. Add a
note saying how to run commands under the same conditions as the test
suite does.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When leaving a detached HEAD, we do a revision walk to make
sure the commit we are leaving isn't being orphaned.
However, this leaves crufty marks in the commit objects
which can confuse later walkers, like the one in
stat_tracking_info.
Let's clean up after ourselves to prevent this conflict.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 8e2dc6ac added a warning when we leave a detached
HEAD whose commit is not reachable from any ref tip. Let's
add a few basic tests to make sure it works.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/i18n-basic:
i18n: "make distclean" should clean up after "make pot"
i18n: Makefile: "pot" target to extract messages marked for translation
i18n: add stub Q_() wrapper for ngettext
i18n: do not poison translations unless GIT_GETTEXT_POISON envvar is set
i18n: add GETTEXT_POISON to simulate unfriendly translator
i18n: add no-op _() and N_() wrappers
commit, status: use status_printf{,_ln,_more} helpers
commit: refer to commit template as s->fp
wt-status: add helpers for printing wt-status lines
Conflicts:
builtin/commit.c
* jk/trace-sifter:
trace: give repo_setup trace its own key
add packet tracing debug code
trace: add trace_strbuf
trace: factor out "do we want to trace" logic
trace: refactor to support multiple env variables
trace: add trace_vprintf
* jk/format-patch-multiline-header:
format-patch: rfc2047-encode newlines in headers
format-patch: wrap long header lines
strbuf: add fixed-length version of add_wrapped_text
--separate-git-dir tells git to create git dir at the specified
location, instead of where it is supposed to be. A .git file that
points to that location will be put in place so that it appears normal
to repo discovery process.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support the well-know convention of reading standard input instead of a
named file if "-" (dash) is specified. GNU grep does the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the helper function split from the receiving end of "git push" to
allow the same optimization on the receiving end of "git fetch".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
The receiving end of "git push" advertises the objects that the repository
itself does not use, but are at the tips of refs in other repositories
whose object databases are used as alternates for it. This helps it avoid
having to receive (and the pusher having to send) objects that are already
available to the receiving repository via the alternates mechanism.
Tweak the helper function that implements this feature, and move it to
transport.[ch] for future reuse by other programs.
The additional test demonstrates how this optimization is helping "git push",
and "git fetch" is ignorant about it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Rename the make_*_path functions so it's clearer what they do, in
particlar make clear what the differnce between make_absolute_path and
make_nonrelative_path is by renaming them real_path and absolute_path
respectively. make_relative_path has an understandable name and is
renamed to relative_path to maintain the name convention.
The function calls have been replaced 1-to-1 in their usage.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Prepare draft release notes to 1.7.4.2
gitweb: highlight: replace tabs with spaces
make_absolute_path: return the input path if it points to our buffer
valgrind: ignore SSE-based strlen invalid reads
diff --submodule: split into bite-sized pieces
cherry: split off function to print output lines
branch: split off function that writes tracking info and commit subject
standardize brace placement in struct definitions
compat: make gcc bswap an inline function
enums: omit trailing comma for portability
Conflicts:
RelNotes
* lt/rename-no-extra-copy-detection:
diffcore-rename: improve estimate_similarity() heuristics
diffcore-rename: properly honor the difference between -M and -C
for_each_hash: allow passing a 'void *data' pointer to callback
* mg/placeholders-are-lowercase:
Make <identifier> lowercase in Documentation
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
CodingGuidelines: downcase placeholders in usage messages
The code notices that the caller does not want any detail of the changes
and only wants to know if there is a change or not by specifying --quiet.
And it breaks out of the loop when it knows it already found any change.
When you have a post-process filter (e.g. --diff-filter), however, the
path we found to be different in the previous round and set HAS_CHANGES
bit may end up being uninteresting, and there may be no output at the end.
The optimization needs to be disabled for such case.
Note that the f245194 (diff: change semantics of "ignore whitespace"
options, 2009-05-22) already disables this optimization by refraining
from setting HAS_CHANGES when post-process filters that need to inspect
the contents of the files (e.g. -S, -w) in diff_change() function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add two new unit tests. One to test the feature that that
was added in e32e00d, and another to test the regression
that was fixed in the parent to this commit.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some versions of strlen use SSE to speed up the calculation and load 4
bytes at a time, even if it means reading past the end of the
allocated memory. This read is safe and when the strlen function is
inlined, it is not replaced by valgrind, which reports a
false-possitive.
Tell valgrind to ignore this particular error, as the read is, in
fact, safe. Current upstream-released version 3.6.1 is affected. Some
distributions have this fixed in their latest versions.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Variables from the inherited environment that are meaningful to git
can break tests in undesirable ways. For example,
GIT_PAGER=more sh t5400-send-pack.sh -v -i
hangs. So unset all environment variables in the GIT_ namespace in
test-lib, with a few exceptions:
- GIT_TRACE* are useful for tracking down bugs exhibited by a failing
test;
- GIT_DEBUG* are GIT_TRACE variables by another name, practically
speaking. They should probably be tweaked to follow the
GIT_TRACE_foo scheme and use trace_printf machinery some time.
- GIT_USE_LOOKUP from v1.5.6-rc0~134^2~1 (sha1-lookup: more memory
efficient search in sorted list of SHA-1, 2007-12-29) is about
trying an alternate implementation strategy rather than changing
semantics and it can be useful to compare performance with and
without it set.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that test-lib sets $HOME to protect against pollution from user
settings, GIT_CONFIG_NOGLOBAL is not needed for use by the test
suite any more. And as luck would have it, a quick code search
reveals no other users in the wild.
This patch does not affect GIT_CONFIG_NOSYSTEM, which is still
needed.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set GIT_ATTR_NOSYSTEM in test-lib to make tests more reliable in two
ways:
- an invalid GIT_ATTR_NOSYSTEM setting should not cause tests to fail
with "fatal: bad config value for 'GIT_ATTR_NOSYSTEM'".
- /etc/gitattributes should not change the outcome of tests.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After v0.99.7~99 (Retire support for old environment variables,
2005-09-09), there is no more need to unset a stray AUTHOR_NAME
variable that might have entered the test environment.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-list --first-parent --boundary $commit^..$commit" segfaults on a
merge commit since 8d2dfc4 (process_{tree,blob}: show objects without
buffering, 2009-04-10), as it tried to dereference a commit that was
discarded as UNINTERESTING without being parsed (hence lacking "tree").
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cloning a p4 depot by default generates a single commit. The use
of the "@all" revision specifier instead tells git-p4 to import
all commits. Check to make sure both these invocations work as
expected.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the "could not %s %s... %s" message into "could not revert
%s... %s" and "could not apply %s... %s". This makes it easier for
translators to understand the message.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate the "Your local changes [...]" message without using the
`me' variable, instead split up the two messages so translators can
translate the whole messages as-is.
Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "renamed: %s -> %s" message which appears as part of
git-status(1) output. Two tests in t4001-diff-rename.sh explicitly
checked for this message. Change them to skip under
GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "# Initial commit" message. A test in t7501-commit.sh
explicitly checked for this message. Change it to skip under
GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "# Changes to be committed:" messages. Several tests
explicitly checked for this message. Change them to skip under
GETTEXT_POISON=YesPlease.
Since these tests didn't check for the rest of the git-status(1)
output this change has been split up from the "git-status basic
messages" patch.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "nothing to commit" messages. Many tests explicitly
checked for this message. Change them to skip under
GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the most common git-status messages. Many tests checked for
these explicitly. Change them to skip under GETTEXT_POISON=YesPlease.
Some of the tests in t7508-status.sh needed to be split up when I
added C_LOCALE_OUTPUT to them, since parts of them affected later
tests (some of which aren't being skipped) indirectly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "To prevent you from losing history" message. A test in
lib-httpd.sh and another in t5541-http-push.sh explicitly checked for
this message. Change them to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the tag_template message as translatable with N_() and then use
it later with _(). We need to skip a test under GETTEXT_POISON that
relies on the output having a leading newline.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the ""Unstaged changes after reset:" message. A test in
t7102-reset.sh explicitly checked for this message. Change it to skip
under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "Wonderful" message. A test in t7600-merge.sh
explicitly checked for this message. Change it to skip under
GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "You have not concluded your merge messages. A test in
t3030-merge-recursive.sh explicitly checked for this message. Change
it to skip the test under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "Updating %s..%s\n" message. A test in
t1200-tutorial.sh explicitly checked for this message. Split it into
two tests to skip the test_cmp test under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "--name-only/--name-status/--check does not make sense"
messages. A test in t4014-format-patch.sh explicitly checked for these
messages. Change them to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "--open-files-in-pager only works on the worktree"
message. A test in t7811-grep-open.sh explicitly checked for this
message. Change it to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate some of the formatting messages that appear on git-fetch
showing how branches/tags etc. were updated.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "# Please enter the commit message for your changes."
message. Several tests in t7500-commit.sh and t7502-commit.sh assume
that this message starts with a newline. Change the tests to to skip
under GETTEXT_POISON=YesPlease.
These fail under GETTEXT_POISON=YesPlease because the poison editor
message doesn't do the right thing with comments and line breaks, so
these messages will be incorrectly broken up across lines.
This test should not be skipped under a hypothetical future testing
mode that tests Git under language locales, since those messages
should all start with a newline like the original.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "(root-commit)" and "detached HEAD" fragments that
appear when you commit either the root commit, or a commit in a
detached head translatable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "You are in the middle of a merge -- cannot amend."
message. Several tests in t7110-reset-merge.sh explicitly checked for
this message. Change them to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "HEAD is now at" messages. Several tests in t7201-co.sh
explicitly checked for this message. Change them to skip under
GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "(no branch)" message that's shown by "git branch" when
you're in a detached HEAD.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "git branch -v" messages translatable, e.g.:
5054b57 [ahead 8] branch error fixup
This is possibly a plumbing message.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "Deleted %sbranch %s (was %s).\n" messages. test in
t3200-branch.sh explicitly checked for this message. Change it to skip
under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "remove '%s'" message translatable. It's displayed under `git
add -u --verbose`. Also skip the corresponding test when output is not
in the C locale.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "did not match any files" message translatable, and skip the
test that checks for it when the C_LOCALE_OUTPUT prereq is not
present.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests t2204 (.gitignore) and t3700 (add) explicitly check for
these messages, so while at it, split each relevant test into a part
that just checks "git add"'s exit status and a part that checks
porcelain output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These messages could benefit from splitting up. An earlier version of
this patch began like this:
const char *reinit_shared = _("Reinitialized existing shared Git repository in %s\n");
const char *init_shared = _("Initialized empty shared Git repository in %s\n");
const char *reinit_noshared = _("Reinitialized existing Git repository in %s\n");
const char *init_noshared = _("Initialized empty Git repository in %s\n");
But in the first round of gettextization I'm aiming to keep code
changes to a minimum for ease of review. So just add a comment
explaining to translators how the sprintf format gets used so they
can cope for now if the language's grammar allows.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* so/submodule-no-update-first-time:
t7406: "git submodule update {--merge|--rebase]" with new submodules
submodule: no [--merge|--rebase] when newly cloned
The --max-count limit is implemented by counting revisions in
get_revision(), but the -S and -G take effect later when running diff.
Hence "--max-count=10 -Sfoo" meant "examine the 10 first revisions, and
out of them, show only those changing the occurences of foo", not "show 10
revisions changing the occurences of foo".
In case the commit isn't actually shown, cancel the decrement of
max_count.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Fix typo in t/README
ls-remote documentation: <refs> argument is optional
Add Author and Documentation sections to git-for-each-ref.txt
Documentation: remove redundant colons in git-for-each-ref.txt
If the commit to be checked out on "git submodule update" has already been
fetched in the submodule there is no need to run "git fetch" again. Since
"git fetch" recently learned recursion (and the new on-demand mode to
fetch commits recorded in the superproject is enabled by default) this
will happen pretty often, thereby making the unconditional fetch during
"git submodule update" unnecessary.
If the commit is not present in the submodule (e.g. the user disabled the
fetch on-demand mode) the fetch will be run as before.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When looking for submodules where new commits have been recorded in the
superproject ignore those cases where the submodules commits are already
present locally. This can happen e.g. when the submodule has been rewound
to an earlier state. Then there is no need to fetch the submodule again
as the commit recorded in the newly fetched superproject commit has
already been fetched earlier into the submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now the behavior of fetch and pull can be configured to the recently added
'on-demand' mode separately for each submodule too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To enable the user to change the default behavior of "git fetch" and "git
pull" regarding submodule recursion add the new "on-demand" value which
has just been added to the "--recurse-submodules" command line option.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now the --recurse-submodules option could only be used to either
fetch all populated submodules recursively or to disable recursion
completely. As fetch and pull now by default just fetch those submodules
for which new commits have been fetched in the superproject, a command
line option to enforce that behavior is needed to be able to override
configuration settings.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To be able to access all commits of populated submodules referenced by the
superproject it is sufficient to only then let "git fetch" recurse into a
submodule when the new commits fetched in the superproject record new
commits for it. Having these commits present is extremely useful when
using the "--submodule" option to "git diff" (which is what "git gui" and
"gitk" do since 1.6.6), as all submodule commits needed for creating a
descriptive output can be accessed. Also merging submodule commits (added
in 1.7.3) depends on the submodule commits in question being present to
work. Last but not least this enables disconnected operation when using
submodules, as all commits necessary for a successful "git submodule
update -N" will have been fetched automatically. So we choose this mode as
the default for fetch and pull.
Before a new or changed ref from upstream is updated in update_local_ref()
"git rev-list <new-sha1> --not --branches --remotes" is used to determine
all newly fetched commits. These are then walked and diffed against their
parent(s) to see if a submodule has been changed. If that is the case, its
path is stored to be fetched after the superproject fetch is completed.
Using the "--recurse-submodules" or the "--no-recurse-submodules" option
disables the examination of the fetched refs because the result will be
ignored anyway.
There is currently no infrastructure for storing deleted and new
submodules in the .git directory of the superproject. That's why fetch and
pull for now only fetch submodules that are already checked out and are
not renamed.
In t7403 the "--no-recurse-submodules" argument had to be added to "git
pull" to avoid failure because of the moved upstream submodule repo.
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You no longer get this output with GIT_TRACE=1; instead, you
can do GIT_TRACE_SETUP=1.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak the GETTEXT_POISON facility so it is activated at run time
instead of compile time. If the GIT_GETTEXT_POISON environment
variable is set, _(msg) will result in gibberish as before; but if the
GIT_GETTEXT_POISON variable is not set, it will return the message for
human-readable output. So the behavior of mistranslated and
untranslated git can be compared without rebuilding git in between.
For simplicity we always set the GIT_GETTEXT_POISON variable in tests.
This does not affect builds without the GETTEXT_POISON compile-time
option set, so non-i18n git will not be slowed down.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new GETTEXT_POISON compile-time parameter to make _(msg) always
return gibberish. So now you can run
make GETTEXT_POISON=YesPlease
to get a copy of git that functions correctly (one hopes) but produces
output that is in nobody's native language at all.
This is a debugging aid for people who are working on the i18n part of
the system, to make sure that they are not marking plumbing messages
that should never be translated with _().
As new strings get marked for translation, naturally a number of tests
will be broken in this mode. Tests that depend on output from
Porcelain will need to be marked with the new C_LOCALE_OUTPUT test
prerequisite. Newly failing tests that do not depend on output from
Porcelain would be bugs due to messages that should not have been
marked for translation.
Note that the string we're using ("# GETTEXT POISON #") intentionally
starts the pound sign. Some of Git's tests such as
t3404-rebase-interactive.sh rely on interactive editing with a fake
editor, and will needlessly break if the message doesn't start with
something the interactive editor considers a comment.
A future patch will fix fix the underlying cause of that issue by
adding "#" characters to the commit advice automatically.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/rename-no-extra-copy-detection:
diffcore-rename: improve estimate_similarity() heuristics
diffcore-rename: properly honor the difference between -M and -C
for_each_hash: allow passing a 'void *data' pointer to callback
In 882fd11 (merge-recursive: Delay content merging for renames 2010-09-20),
there was code that checked for whether we could skip updating a file in
the working directory, based on whether the merged version matched the
current working copy. Due to the desire to handle directory/file conflicts
that were resolvable, that commit deferred content merging by first
updating the index with the unmerged entries and then moving the actual
merging (along with the skip-the-content-update check) to another function
that ran later in the merge process. As part moving the content merging
code, a bug was introduced such that although the message about skipping
the update would be printed (whenever GIT_MERGE_VERBOSITY was sufficiently
high), the file would be unconditionally updated in the working copy
anyway.
When we detect that the file does not need to be updated in the working
copy, update the index appropriately and then return early before updating
the working copy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'svn-fe' of git://repo.or.cz/git/jrn: (31 commits)
fast-import: make code "-Wpointer-arith" clean
vcs-svn: teach line_buffer about temporary files
vcs-svn: allow input from file descriptor
vcs-svn: allow character-oriented input
vcs-svn: add binary-safe read function
t0081 (line-buffer): add buffering tests
vcs-svn: tweak test-line-buffer to not assume line-oriented input
tests: give vcs-svn/line_buffer its own test script
vcs-svn: make test-line-buffer input format more flexible
vcs-svn: teach line_buffer to handle multiple input files
vcs-svn: collect line_buffer data in a struct
vcs-svn: replace buffer_read_string memory pool with a strbuf
vcs-svn: eliminate global byte_buffer
fast-import: add 'ls' command
vcs-svn: Allow change nodes for root of tree (/)
vcs-svn: Implement Prop-delta handling
vcs-svn: Sharpen parsing of property lines
vcs-svn: Split off function for handling of individual properties
vcs-svn: Make source easier to read on small screens
vcs-svn: More dump format sanity checks
...
* mg/placeholders-are-lowercase:
Make <identifier> lowercase in Documentation
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
CodingGuidelines: downcase placeholders in usage messages
* pw/p4:
git-p4: support clone --bare
git-p4: decode p4 wildcard characters
git-p4: better message for "git-p4 sync" when not cloned
git-p4: reinterpret confusing p4 message
git-p4: accommodate new move/delete type in p4
git-p4: add missing newline in initial import message
git-p4: fix key error for p4 problem
git-p4: test script
* uk/checkout-ambiguous-ref:
Rename t2019 with typo "amiguous" that meant "ambiguous"
checkout: rearrange update_refs_for_switch for clarity
checkout: introduce --detach synonym for "git checkout foo^{commit}"
checkout: split off a function to peel away branchname arg
checkout: fix bug with ambiguous refs
Conflicts:
builtin/checkout.c
* en/object-list-with-pathspec:
Add testcases showing how pathspecs are handled with rev-list --objects
Make rev-list --objects work together with pathspecs
* nd/struct-pathspec: (22 commits)
t6004: add pathspec globbing test for log family
t7810: overlapping pathspecs and depth limit
grep: drop pathspec_matches() in favor of tree_entry_interesting()
grep: use writable strbuf from caller for grep_tree()
grep: use match_pathspec_depth() for cache/worktree grepping
grep: convert to use struct pathspec
Convert ce_path_match() to use match_pathspec_depth()
Convert ce_path_match() to use struct pathspec
struct rev_info: convert prune_data to struct pathspec
pathspec: add match_pathspec_depth()
tree_entry_interesting(): optimize wildcard matching when base is matched
tree_entry_interesting(): support wildcard matching
tree_entry_interesting(): fix depth limit with overlapping pathspecs
tree_entry_interesting(): support depth limit
tree_entry_interesting(): refactor into separate smaller functions
diff-tree: convert base+baselen to writable strbuf
glossary: define pathspec
Move tree_entry_interesting() to tree-walk.c and export it
tree_entry_interesting(): remove dependency on struct diff_options
Convert struct diff_options to use struct pathspec
...
The most important issue is that after unsetting `i18n.commitencoding'
config variable t9500 no longer will use author and comitter name
containing ISO-8859-1 characters, which are invalid UTF-8 characters.
Besides it is good practice in general to clean up the state in tests.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://github.com/gitster/git:
vcs-svn: Allow change nodes for root of tree (/)
vcs-svn: Implement Prop-delta handling
vcs-svn: Sharpen parsing of property lines
vcs-svn: Split off function for handling of individual properties
vcs-svn: Make source easier to read on small screens
vcs-svn: More dump format sanity checks
vcs-svn: Reject path nodes without Node-action
vcs-svn: Delay read of per-path properties
vcs-svn: Combine repo_replace and repo_modify functions
vcs-svn: Replace = Delete + Add
vcs-svn: handle_node: Handle deletion case early
vcs-svn: Use mark to indicate nodes with included text
vcs-svn: Unclutter handle_node by introducing have_props var
vcs-svn: Eliminate node_ctx.mark global
vcs-svn: Eliminate node_ctx.srcRev global
vcs-svn: Check for errors from open()
vcs-svn: Allow simple v3 dumps (no deltas yet)
Conflicts:
t/t9010-svn-fe.sh
vcs-svn/svndump.c
buffer_read_string works well for non line-oriented input except for
one problem: it does not tell the caller how many bytes were actually
written. This means that unless one is very careful about checking
for errors (and eof) the calling program cannot tell the difference
between the string "foo" followed by an early end of file and the
string "foo\0bar\0baz".
So introduce a variant that reports the length, too, a thinner wrapper
around strbuf_fread. Its result is written to a strbuf so the caller
does not need to keep track of the number of bytes read.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
POSIX makes the behavior of read(2) from a pipe fairly clear: a read
from an empty pipe will block until there is data available and any
other read will not block, prefering to return a partial result.
Likewise, fread(3) and fgets(3) are clearly specified to act as
though implemented by calling fgetc(3) in a simple loop. But the
buffering behavior of fgetc is less clear.
Luckily, no sane platform is going to implement fgetc by calling the
equivalent of read(2) more than once. fgetc has to be able to
return without filling its buffer to preserve errno when errors are
encountered anyway. So let's assume the simpler behavior (trust) but
add some tests to catch insane platforms that violate that when they
come (verify).
First check that fread can handle a 0-length read from an empty fifo.
Because open(O_RDONLY) blocks until the writing end is open, open the
writing end of the fifo in advance in a subshell.
Next try short inputs from a pipe that is not filled all the way.
Lastly (two tests) try very large inputs from a pipe that will not fit
in the relevant buffers. The first of these tests reads a little
more than 8192 bytes, which is BUFSIZ (the size of stdio's buffers)
on this Linux machine. The second reads a little over 64 KiB (the
pipe capacity on Linux) and is not run unless requested by setting
the GIT_REMOTE_SVN_TEST_BIG_FILES environment variable.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Do not expect an implicit newline after each input record.
Use a separate command to exercise buffer_skip_bytes.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Split the line_buffer test into small pieces and move it to its
own file as preparation for adding more tests.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Imitate the input format of test-obj-pool to support arbitrary
sequences of commands rather than alternating read/copy. This should
make it easier to add tests that exercise other line_buffer functions.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Lazy fast-import frontend authors that want to rely on the backend to
keep track of the content of the imported trees _almost_ have what
they need in the 'cat-blob' command (v1.7.4-rc0~30^2~3, 2010-11-28).
But it is not quite enough, since
(1) cat-blob can be used to retrieve the content of files, but
not their mode, and
(2) using cat-blob requires the frontend to keep track of a name
(mark number or object id) for each blob to be retrieved
Introduce an 'ls' command to complement cat-blob and take care of the
remaining needs. The 'ls' command finds what is at a given path
within a given tree-ish (tag, commit, or tree):
'ls' SP <dataref> SP <path> LF
or in fast-import's active commit:
'ls' SP <path> LF
The response is a single line sent through the cat-blob channel,
imitating ls-tree output. So for example:
FE> ls :1 Documentation
gfi> 040000 tree 9e6c2b599341d28a2a375f8207507e0a2a627fe9 Documentation
FE> ls 9e6c2b599341d28a2a375f8207507e0a2a627fe9 git-fast-import.txt
gfi> 100644 blob 4f92954396e3f0f97e75b6838a5635b583708870 git-fast-import.txt
FE> ls :1 RelNotes
gfi> 120000 blob b942e49944 RelNotes
FE> cat-blob b942e49944
gfi> b942e49944 blob 32
gfi> Documentation/RelNotes/1.7.4.txt
The most interesting parts of the reply are the first word, which is
a 6-digit octal mode (regular file, executable, symlink, directory,
or submodule), and the part from the second space to the tab, which is
a <dataref> that can be used in later cat-blob, ls, and filemodify (M)
commands to refer to the content (blob, tree, or commit) at that path.
If there is nothing there, the response is "missing some/path".
The intent is for this command to be used to read files from the
active commit, so a frontend can apply patches to them, and to copy
files and directories from previous revisions.
For example, proposed updates to svn-fe use this command in place of
its internal representation of the repository directory structure.
This simplifies the frontend a great deal and means support for
resuming an import in a separate fast-import run (i.e., incremental
import) is basically free.
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Sverre Rabbelier <srabbelier@gmail.com>
When "git commit" was rewritten in C (v1.5.4-rc0~78^2~30,
2007-11-08), a subtle bug in --template was introduced. If the
file named by a --template parameter is missing, previously git
would error out with a message:
Commit template file does not exist.
but in the C version the --template parameter gets ignored and
the default template is used.
t7500 has two tests for this case which would have caught it, except
that with the default $EDITOR, the commit message template is left
unmodified, causing 'git commit' to error out and the test to
succeed.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subject and identity headers may be arbitrarily long. In the
past, we just assumed that single-line headers would be
reasonably short. For multi-line subjects that we squish
into a single line, we just "pre-folded" the data in
pp_title_line by adding a newline and indentation.
There were two problems. One is that, although rare,
single-line messages can actually be longer than the
recommended line-length limits. The second is that the
pre-folding interacted badly with rfc2047 encoding, leading
to malformed headers.
Instead, let's stop pre-folding the subject lines, and just
fold everything based on length in add_rfc2047, whether
it is encoded or not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is possible to break your repository config by creating an invalid key. The
config parser in turn chokes on it:
$ git init
Initialized empty Git repository in /tmp/gittest/.git/
$ git config .foo false
$ git config core.bare
fatal: bad config file line 6 in .git/config
This patch makes git-config reject keys which start or end with a dot and adds
tests for these cases.
Signed-off-by: Libor Pechacek <lpechacek@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sanity-check config variable names when adding and retrieving them. As a side
effect code duplication between git_config_set_multivar and get_value (in
builtin/config.c) was removed and the common functionality was placed in
git_config_parse_key.
This breaks a test in t1300 which used invalid section-less keys in the tests
for "git -c". However, allowing such names there was useless, since there was
no way to set them via config file, and no part of git actually tried to use
section-less keys. This patch updates the test to use more realistic examples
as well as adding its own test.
Signed-off-by: Libor Pechacek <lpechacek@suse.cz>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic in builtin_diffstat assumes that a
complete_rewrite pair should have its lines counted. This is
nonsensical for binary files and leads to confusing things
like:
$ git diff --stat --summary HEAD^ HEAD
foo.rand | Bin 4096 -> 4096 bytes
1 files changed, 0 insertions(+), 0 deletions(-)
$ git diff --stat --summary -B HEAD^ HEAD
foo.rand | 34 +++++++++++++++-------------------
1 files changed, 15 insertions(+), 19 deletions(-)
rewrite foo.rand (100%)
So let's reorder the function to handle binary files first
(which from diffstat's perspective look like complete
rewrites anyway), then rewrites, then actual diffstats.
There are two bonus prizes to this reorder:
1. It gets rid of a now-superfluous goto.
2. The binary case is at the top, which means we can
further optimize it in the next patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the user was advised to use commit -c CHERRY_PICK_HEAD after
a conflicting cherry-pick. While this would preserve the original
commit's authorship, it would sadly discard cherry-pick's carefully
crafted MERGE_MSG (which contains the list of conflicts as well as the
original commit-id in the case of cherry-pick -x).
On the other hand, if a bare 'commit' were performed, it would preserve
the MERGE_MSG while resetting the authorship.
In other words, there was no way to simultaneously take the authorship
from CHERRY_PICK_HEAD and the commit message from MERGE_MSG.
This change fixes that situation. A bare 'commit' will now take the
authorship from CHERRY_PICK_HEAD and the commit message from MERGE_MSG.
If the user wishes to reset authorship, that must now be done explicitly
via --reset-author.
A side-benefit of passing commit authorship along this way is that we
can eliminate redundant authorship parsing code from revert.c.
(Also removed an unused include from revert.c)
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a cherry-pick conflicts git advises:
$ git commit -c <original commit id>
to preserve the original commit message and authorship. Instead, let's
record the original commit id in CHERRY_PICK_HEAD and advise:
$ git commit -c CHERRY_PICK_HEAD
A later patch teaches git to handle the '-c CHERRY_PICK_HEAD' part.
Note that we record CHERRY_PICK_HEAD even in the case where there
are no conflicts so that we may use it to communicate authorship to
commit; this will then allow us to remove set_author_ident_env from
revert.c. However, we do not record CHERRY_PICK_HEAD when --no-commit
is used, as presumably the user intends to further edit the commit
and possibly even cherry-pick additional commits on top.
Tests and documentation contributed by Jonathan Nieder.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All the tests in t3507 (cherry-pick with conflicts) begin with the
same checkout + read-tree + clean incantation to ensure a predictable
starting point. Factor out a function for that so the interesting
part of the tests is easier to read.
The "update-index --refresh" and "diff-index --exit-code HEAD" are not
necessary as the point of this testsuite is not about testing
"read-tree --reset".
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git traditionally overwrites untracked symlinks silently. This will
generally not cause massive data loss, but it is inconsistent with
the behavior for regular files, which are not silently overwritten.
With this change, git refuses to overwrite untracked symlinks by
default. If the user really wants to overwrite the untracked
symlink, he has git-clean and git-checkout -f at his disposal.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
t/t7500-commit.sh: use test_cmp instead of test
t/gitweb-lib.sh: Ensure that errors are shown for --debug --immediate
gitweb/gitweb.perl: don't call S_ISREG() with undef
gitweb/gitweb.perl: remove use of qw(...) as parentheses
Test 5 wants to test --cherry-pick but limits by pathspec in such a way
that there are no commits on the left side of the range.
Add a test without "--cherry-pick" which displays this, and add two
more commits and another test which tests what we're after. This also
shortens the last test.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change commit_msg_is() in t/t7500-commit.sh to use test_cmp instead of
the shell's test function. Now if a test fails we'll get test_cmp
output showing us what failed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because '--immediate' stops test suite after first error, therefore in
this mode
test_debug 'cat gitweb.log'
was never ran, thus in effect negating effect of '--debug' option.
This made finidng the cause of errors in gitweb test sute difficult.
Modify the gitweb_run test subroutine to run test_debug itself in the
case of errors (and also remove "test_debug 'cat gitweb.log'" from
gitweb tests).
This makes it possible to run *gitweb tests* with --immediate ---debug
combination of options; also it makes gitweb tests to not output
spurious debug data that is not considered error.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like git clone --bare, build a .git directory but no
checked out files.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-By: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are four wildcard characters in p4. Files with these
characters can be added to p4 repos using the "-f" option.
They are stored in %xx notation, and when checked out, p4
converts them back to normal.
This patch does the same thing when importing into git,
converting the four special characters. Without this change,
the files appear with literal %xx in their names.
Be careful not to produce "*" in filenames on windows. That
will fail.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some p4 failures result in an error, but the info['code'] is not
set. These include a bad p4 executable, or a core dump from p4,
and other odd internal errors where p4 fails to generate proper
marshaled output.
Make sure the info key exists before using it to avoid a python
traceback.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We would allow rename detection to do copy detection even when asked
purely for renames. That confuses users, but more importantly it can
terminally confuse the recursive merge rename logic.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 86ac751 (Allow cloning an empty repository,
2009-01-23), doing:
git clone does-not-exist
has created does-not-exist as an empty repository. This was
an unintentional side effect of 86ac751. Even weirder,
doing:
git clone does-not-exist new-dir
_does_ fail, making this "feature" (if you want to consider
it such) broken. Let's detect this situation and explicitly
die. It's almost certainly not what the user intended.
This patch also adds two tests. One for the missing path
case, and one to confirm that a similar case, cloning a
non-repository directory, fails.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Mac OS X 10.5.0, test_terminal gets stuck reading from the pty
master every once in a while. To reproduce the problem:
perl -MIO::Pty -MFile::Copy -e '
for (my $i = 0;; $i++) {
my $master = new IO::Pty;
my $slave = $master->slave;
if (fork == 0) {
close $master or die "close: $!";
open STDOUT, ">&", $slave or die "dup2: $!";
close $slave or die "close: $!";
exec("echo", "hi", $i) or die "exec: $!";
}
close $slave or die "close: $!";
copy($master, \*STDOUT) or die "copy: $!";
close $master or die "close: $!";
wait;
}
'
It blocks after 7000 iterations or so in sysread(). The relevant
sysread() call is the second call by the parent, which presumably
executes before the child dies but after the parent has read all
output from there.
Since this is an intermitent problem, the quick check of terminal
support in lib-terminal doesn't catch it. Skip these tests on the Mac
for now.
Noticed-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add two test cases in t7406 to ensure that the --merge/--rebase options
are ignored for "git submodule update" with new modules. These test that
a simple checkout is performed instead.
Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, patch-id trips over our very own diff extension for marking
the absence of newline at EOF.
Fix it. (Ignore it, it's whitespace.)
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, patch-id trips over our very own output that marks the absence
of newline at EOF.
Expose this in a test.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a new branch using the --track option, we must make sure that
we don't try to set an upstream that does not make sense to follow (using
'git pull') or update (using 'git push'). The current code checks against
using HEAD as upstream (since tracking a symref doesn't make sense). However,
tracking a tag doesn't make sense either. Indeed, tracking _any_ ref that is
not a (local or remote) branch doesn't make sense, and should be disallowed.
This patch achieves this by checking that the ref we're trying to --track
resides within refs/heads/* or refs/remotes/*. This new check replaces the
previous check against HEAD.
A couple of testcases are also added, verifying that we cannot create
branches with tags as upstreams.
Finally, some selftests relying on using a non-branch as an upstream have
been reworked or removed:
- t6040: Reverse the meaning of two tests that depend on the ability to
use (lightweight and annotated) tags as upstreams. These two tests were
originally added in commits 1be570f and 57ffc5f, and this patch reverts the
intention of those two commits.
- t7201: Remove part of a test (introduced in 9188ed8) relying on a
non-branch as upstream.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since bb0a484 (mergetool: Skip autoresolved paths, 2010-08-17),
mergetool uses different ways of figuring out the list of files with
merge conflicts depending on whether rerere is active. If rerere is
active, mergetool will use 'git rerere status' to list the files with
remaining conflicts. However, the output from that command does not
list conflicts of types that rerere does not handle, such as
modify/remove conflicts.
Another problem with solely relying on the output from 'git rerere
status' is that, for new conflicts that are not yet known to rerere,
the output from the command will list the files even after adding them
to the index. This means that if the conflicts in some files have been
resolved and 'git mergetool' is run again, it will ask the user
something like the following for each of those files.
file1: file does not need merging
Continue merging other unresolved paths (y/n) ?
Solve both of these problems by replacing the call to 'git rerere
status' with a call to the new 'git rerere remaining' that was
introduced in the previous commit.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a merge is stopped due to conflicts or --no-commit, the
subsequent commit calls the prepare-commit-msg hook. However,
it is not called after a clean merge. Fix this inconsistency
by invoking the hook after clean merges as well.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
*.c part for matches with '<[A-Z]+>' (and affected test).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds tests where an untracked file and an untracked symlink are in the
way where a directory should be created by 'git checkout'. Commit b1735b1a
(do not overwrite files in leading path, 2010-12-14) fixed the case where
a file is in the way, but the untracked symlink is still removed silently.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When command_input_pipe and command_output_pipe are used as a
method of a Git::repository instance, they eventually call into
_cmd_exec method that sets up the execution environment such as
GIT_DIR, GIT_WORK_TREE environment variables and the current
working directory in the child process that interacts with the
repository.
command_bidi_pipe however didn't expect to be called as such, and
lacked all these set-up. Because of this, a program that did this
did not work as expected:
my $repo = Git->repository(Directory => '/some/where/else');
my ($pid, $in, $out, $ctx) =
$repo->command_bidi_pipe(qw(hash-object -w --stdin-paths));
This patch refactors the _cmd_exec into _setup_git_cmd_env that
sets up the execution environment, and makes _cmd_exec and
command_bidi_pipe to use it.
Note that unlike _cmd_exec that execv's a git command as an
external process, command_bidi_pipe is called from the main line
of control, and the execution environment needs to be restored
after open2() does its magic.
Signed-off-by: Masatake Osanai <unpush@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git rebase' without arguments is currently not supported. Make it
default to 'git rebase @{upstream}'. That is also what 'git pull
[--rebase]' defaults to, so it only makes sense that 'git rebase'
defaults to the same thing.
Defaulting to @{upstream} will make it possible to run e.g. 'git
rebase -i' without arguments, which is probably a quite common use
case. It also improves the scenario where you have multiple branches
that rebase against a remote-tracking branch, where you currently have
to choose between the extra network delay of 'git pull' or the
slightly awkward keys to enter 'git rebase @{u}'.
The error reporting when no upstream is configured for the current
branch or when no branch is checked out is reused from git-pull.sh. A
function is extracted into git-parse-remote.sh for this purpose.
Helped-by: Yann Dirson <ydirson@altern.org>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If '--[no-]allow_rerere_autoupdate' is passed when 'git rebase -m' is
called and a merge conflict occurs, the flag will be forgotten for the
rest of the rebase process. Make rebase remember it by saving the
value.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a rebase is resumed, interactive rebase remembers any merge
strategy passed when the rebase was initated. Make non-interactive
rebase remember any merge strategy as well. Also make non-interactive
rebase remember any merge strategy options.
To be able to resume a rebase that was initiated with an older version
of git (older than this commit), make sure not to expect the saved
option files to exist.
Test case idea taken from Junio's 71fc224 (t3402: test "rebase
-s<strategy> -X<opt>", 2010-11-11).
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sub commands '--continue', '--skip' or '--abort' may only be used
standalone according to the documentation. Other options following the
sub command are currently not accepted, but options preceeding them
are. For example, 'git rebase --continue -v' is not accepted, while
'git rebase -v --continue' is. Tighten up the check and allow no other
options when one of these sub commands are used.
Only check that it is standalone for non-interactive rebase for
now. Once the command line processing for interactive rebase has been
replaced by the command line processing in git-rebase.sh, this check
will also apply to interactive rebase.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Here is a 'feature' command for streams to use to require support for
the notemodify (N) command.
When the 'feature' facility was introduced (v1.7.0-rc0~95^2~4,
2009-12-04), the notes import feature was old news (v1.6.6-rc0~21^2~8,
2009-10-09) and it was not obvious it deserved to be a named feature.
But now that is clear, since all major non-git fast-import backends
lack support for it.
Details: on git version with this patch applied, any "feature notes"
command in the features/options section at the beginning of a stream
will be treated as a no-op. On fast-import implementations without
the feature (and older git versions), the command instead errors out
with a message like
This version of fast-import does not support feature notes.
So by declaring use of notes at the beginning of a stream, frontends
can avoid wasting time and other resources when the backend does not
support notes. (This would be especially important for backends that
do not support rewinding history after a botched import.)
Improved-by: Thomas Rast <trast@student.ethz.ch>
Improved-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For example, one might use this when making a temporary merge to
test that two topics work well together.
Patch by Junio, with tests from Jeff King.
[jn: with some extra checks for bogus commandline usage]
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commits, trees and tags have structure. Don't let users feed git
with malformed ones. Sooner or later git will die() when
encountering them.
Note that this patch does not check semantics. A tree that points
to non-existent objects is perfectly OK (and should be so, users
may choose to add commit first, then its associated tree for example).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --cached" (without revision) used to mean "git diff --cached
HEAD" (i.e. the user was too lazy to type HEAD). This "correctly"
failed when there was no commit yet. But was that correctness useful?
This patch changes the definition of what particular command means.
It is a request to show what _would_ be committed without further "git
add". The internal implementation is the same "git diff --cached HEAD"
when HEAD exists, but when there is no commit yet, it compares the index
with an empty tree object to achieve the desired result.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test case verifies that filemode-only patches work as expected. Help
systems where "test -x" does not work by applying the test patch also to
the index, where the effects can be verified even on such systems.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first test did not run on msysGit due to the SYMLINKS constraint and
so subsequent tests failed because the test repository was not initialized.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier e10cb0f (tree_entry_interesting(): support wildcard matching,
2010-12-15) and b3d4b34 (tree_entry_interesting(): optimize wildcard
matching when base is matched, 2010-12-15) added tests for globbing
support for diff-tree plumbing. This is a follow-up to update the test
for revision traversal and path pruning machinery for the same topic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If base is already matched, skip that part when calling
fnmatch(). This happens quite often if users start a command from
worktree's subdirectory and prefix is usually prepended to all
pathspecs.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
never_interesting optimization is disabled if there is any wildcard
pathspec, even if it only matches exactly on trees.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a typo where the "git config" arguments "-f" and "--unset" were
swapped leading to the creation of a "--unset" file.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
rebase -i: clarify in-editor documentation of "exec"
tests: sanitize more git environment variables
fast-import: treat filemodify with empty tree as delete
rebase: give a better error message for bogus branch
rebase: use explicit "--" with checkout
Conflicts:
t/t9300-fast-import.sh
These variables should generally not be set in one's
environment, but they do get set by rebase, which means
doing an interactive rebase like:
pick abcd1234 foo
exec make test
will cause false negatives in the test suite.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normal git processes do not allow one to build a tree with an empty
subtree entry without trying hard at it. This is in keeping with the
general UI philosophy: git tracks content, not empty directories.
v1.7.3-rc0~75^2 (2010-06-30) changed that by making it easy to include
an empty subtree in fast-import's active commit:
M 040000 4b825dc642 subdir
One can trigger this by reading an empty tree (for example, the tree
corresponding to an empty root commit) and trying to move it to a
subtree. It is better and more closely analogous to 'git read-tree
--prefix' to treat such commands as requests to remove the subtree.
Noticed-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/setup-fixes:
t1510: fix typo in the comment of a test
Documentation updates for 'GIT_WORK_TREE without GIT_DIR' historical usecase
Subject: setup: officially support --work-tree without --git-dir
tests: compress the setup tests
tests: cosmetic improvements to the repo-setup test
t/README: hint about using $(pwd) rather than $PWD in tests
Fix expected values of setup tests on Windows
The original intention of --work-tree was to allow people to work in a
subdirectory of their working tree that does not have an embedded .git
directory. Because their working tree, which their $cwd was in, did not
have an embedded .git, they needed to use $GIT_DIR to specify where it is,
and because this meant there was no way to discover where the root level
of the working tree was, so we needed to add $GIT_WORK_TREE to tell git
where it was.
However, this facility has long been (mis)used by people's scripts to
start git from a working tree _with_ an embedded .git directory, let git
find .git directory, and then pretend as if an unrelated directory were
the associated working tree of the .git directory found by the discovery
process. It happens to work in simple cases, and is not worth causing
"regression" to these scripts.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New test helpers:
- setup_repo, to initialize a repository or gitfile pointing to a
repository, with core.bare and core.worktree set as specified;
- try_case, to run setup from a given directory and validate the
result, with GIT_DIR and GIT_WORK_TREE set as specified;
- try_repo, to initialize a repository and call "try_case" from the
toplevel and a subdirectory;
- run_wt_tests, to run a battery of tests that check for sane
behavior when GIT_WORK_TREE is set to various positions relative to
the .git dir and cwd.
Use these helpers to make the test shorter, less repetitive, and (one
hopes) easier to understand and modify.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give an overview in "sh t1510-repo-setup.sh --help" output.
Waste some vertical and horizontal space for clearer code.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rj/maint-test-fixes:
t9501-*.sh: Fix a test failure on Cygwin
lib-git-svn.sh: Add check for mis-configured web server variables
lib-git-svn.sh: Avoid setting web server variables unnecessarily
t9142: Move call to start_httpd into the setup test
t3600-rm.sh: Don't pass a non-existent prereq to test #15
Rearrange code to be easier to browse:
- first data
- then functions
- then test assertions
Mark up inline test vectors as
cat >vector <<-\EOF
data
data
EOF
for visual scannability. Use words like "set up" for tests that set
up for other tests, to make it obvious which tests are safe to skip.
Use repeated function calls instead of a loop for the
language-specific tests, so the invocations can be easily tweaked
individually (for example if one starts to fail).
This means if you add a new subdirectory to t4034/, it will not be
automatically used. I think that's worth it for the added
explicitness.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The builtin word regexes should be tested with some simple examples
against simple issues. Do this in bulk.
Mainly due to a lack of language knowledge and inspiration, most of
the test cases (cpp, csharp, java, objc, pascal, php, python, ruby)
are directly based off a C operator precedence table to verify that
all operators are split correctly. This means that they are probably
incomplete or inaccurate except for 'cpp' itself.
Still, they are good enough to already have uncovered a typo in the
python and ruby patterns.
'fortran' is based on my anecdotal knowledge of the DO10I parsing
rules, and thus probably useless. The rest (bibtex, html, tex) are an
ad-hoc test of what I consider important splits in those languages.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a frontend uses a marks file to ensure its state persists between
runs, it may represent "clean slate" when bootstrapping with "no marks
yet". In such a case, feeding the last state with --import-marks and
saving the state after the current run with --export-marks would be a
natural thing to do.
The --import-marks option however errors out when the specified marks file
doesn't exist; this makes bootstrapping a bit difficult. The location of
the marks file becomes backend-dependent when --relative-marks is in
effect, and the frontend cannot check for the existence of the file in
such a case.
The --import-marks-if-exists option does the same thing as --import-marks
but does not flag an error if the named file does not exist yet to help
these frontends.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rj/test-fixes:
t4135-*.sh: Skip the "backslash" tests on cygwin
t3032-*.sh: Do not strip CR from line-endings while grepping on MinGW
t3032-*.sh: Pass the -b (--binary) option to sed on cygwin
t6038-*.sh: Pass the -b (--binary) option to sed on cygwin
Conflicts:
t/t3032-merge-recursive-options.sh
t0000 contains two snippets of actual test output. This causes
problems when passing -v to the test[*]: the test infrastructure
echoes the tests before running them, and the TAP parser then sees
this test output and concludes that two tests failed and that the TAP
output was badly formatted.
Guard against this by quoting the output in the source.
[*] either by running 'make smoke' with GIT_TEST_OPTS=-v, or with
prove ./t0000-basic.sh :: -v
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usual dwim_ref lookup prefers tags to branches. Because
checkout primarily works on branches, though, we switch that
behavior to prefer branches.
However, there was a bug in the implementation in which we
used lookup_commit_reference (which used the regular lookup
rules) to get the actual commit to checkout. Checking out an
ambiguous ref therefore ended up putting us in an extremely
broken state in which we wrote the branch ref into HEAD, but
actually checked out the tree for the tag.
This patch fixes the bug by always attempting to pull the
commit to be checked out from the branch-ified version of
the name we were given.
Patch by Junio, tests and commit message from Jeff King.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests require an svn version 1.5 or newer to run correctly.
In particular, all 1.4.x versions and earlier are too old, so fix
up the case label regex to cover this range exactly.
[Fix provided by Anders Kaseorg <andersk@MIT.EDU>]
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds just a "do it this way" instruction without a lot of explanation,
because the details are too complex to be explained at this point.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, bash stores absolute path names in shell variables in POSIX
format that begins with a slash, rather than in drive-letter format; such
a value is converted to the latter format when it is passed to a non-MSYS
program such as git.
When an expected test value is constructed, it must contain the value that
will be produced by git, which will be in the drive-letter format. But
TRASH_DIRECTORY is in POSIX format. Fix this by using $(pwd), which
produces drive-letter format since 4114156a (Tests on Windows: $(pwd) must
return Windows-style paths).
The change in t1510 is a straight seach-and-replace, except for the first
hunk of the diff.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If svn is built against one version of SQLite and run against another,
libsvn_subr needlessly errors out in operations that need to make a
commit.
That is clearly not a bug in git but let us consider the ramifications for
the test suite. git-svn uses libsvn directly and is probably broken by
that bug; it is right for git-svn tests to fail. The vcs-svn lib, on the
other hand, does not use libsvn and the test t9010 only uses svn to check
its work. This points to two possible improvements:
- do not disable most vcs-svn tests if svn is missing.
- skip validation rather than failing it when svn fails.
Bring about both by putting the svn invocations into a single test that
builds a repo to compare the test-svn-fe result against. The test will
always pass but only will set the new SVNREPO test prereq if svn succeeds;
and validation using that repo gets an SVNREPO prerequisite so it only
runs with working svn installations.
Works-around: http://bugs.debian.org/608925
Noticed-by: A Large Angry SCM <gitzilla@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
The function resolve_relative_url was not prepared to deal with an
scp-style origin 'user@host:path' in the case where 'path' is only a
single component. Fix this by extending the logic that strips one
path component from the $remoteurl.
Also add tests for both styles of URLs.
Noticed-by: Jeffrey Phillips Freeman <jeffrey.freeman@syncleus.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The BSLASHPSPEC tests (11-13) fail on cygwin, since you can't
create files containing an backslash character in the name.
In order to skip these tests, we simply stop (incorrectly)
asserting the BSLASHPSPEC prerequisite in test-lib.sh.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default grep reads in text mode and converts CRLF into LF line
endings, which causes tests 4, 6 and 8 to fail. In a similar manner
to commit a94114ad (Do not strip CR when grepping HTTP headers,
2010-09-12), we set (and export) the GREP_OPTIONS variable to -U so
that grep will use binary mode.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test using the conflict_hunks helper function (test 9) fails
on cygwin, since sed (by default) throws away the CR from CRLF
line endings. This behaviour is undesirable, since the validation
code expects the CRLF line-ending to be present. In order to fix
the problem we pass the -b (--binary) option to sed, using the
SED_OPTIONS variable. We use the SED_STRIPS_CR prerequisite in the
conditional initialisation of SED_OPTIONS.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests using the fuzz_conflict helper function (tests 5-6)
fail on cygwin in the same way they used to on MinGW, prior
to commit ca02ad3. The solution is also the same; passing the
-b (--binary) option to sed, using the SED_OPTIONS variable.
We introduce a new prerequisite SED_STRIPS_CR to use in the
conditional initialisation of SED_OPTIONS, rather than MINGW.
The new prerequisite is set in test-lib.sh for both MinGW and
Cygwin.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX leaves as unspecified the handling of labels greater than 8
characters. Apparently, Sun decided to treat them as errors. Make sed on
Solaris happy by trimming the length of labels to 8 characters.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On some shells (like /usr/xpg4/bin/sh on Solaris), unset will exit
non-zero when passed the name of a variable that has not been set. Use
sane_unset instead so that the return value of unset can be ignored while
the && linkage of the test script can be preserved.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/README recommends chaining test assertions.
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This library file is currently sourced by 57 test files, of which
only four may (optionally) start a web-server in order to access
the svn repo via an http url, rather than a file url.
In addition to isolating the current web-server handling code from
the majority of tests, in a new prepare_httpd function, we also
add some more error checking and reporting code to validate the
apache installation. Only those tests which attempt to start the
web-server, by calling start_httpd, will execute this code.
Note that it is important for start_httpd to return an error
indication, if prepare_httpd fails, so that the failure to use
the web-server, as requested by the user, should not go unnoticed.
(Unless the svnrepo variable is set to an http url at the end of
start_httpd, the remaining tests will use file urls, without
comment.)
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code leads to
fatal: bad config value for 'cvsimport.r' in .git/config
for a standard use case with cvsimport.r set.
cvsimport sets internal variables by checking the config for each
possible command line option. The problem is that config items are case
insensitive, so config.r and config.R are the same. The ugly error is
due to that fact that cvsimport expects a bool for -R (and thus
config.R) but a remote name for -r (and thus config.r).
Fix this by making cvsimport expect long names for uppercase options.
config options for cvsimport have been undocumented so far, though
present in the code and advertised in several tutorials. So one may read
"enhance" for "fix". Similarly, the names for the options are
"documented" in the code, waitiing for their lowercase equivalents to be
transformed into long config options, as well.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add in missing Perl prerequisites for new tests of send-email.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ks/blame-worktree-textconv-cached:
fill_textconv(): Don't get/put cache if sha1 is not valid
t/t8006: Demonstrate blame is broken when cachetextconv is on
For example, this would allow cherry-picking or reverting patches from
a piece of history with a different end-of-line style, like so:
$ git revert -Xrenormalize old-problematic-commit
Currently that is possible with manual use of merge-recursive but the
cherry-pick/revert porcelain does not expose the functionality.
While at it, document the existing support for --strategy.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--no-chain-reply-to' option is a Getopt::Long boolean option. The
'--no-' prefix (as in --no-chain-reply-to) for boolean options is not
supported in Getopt::Long version 2.32 which was released with Perl 5.8.0.
This version only supports '--no' as in '--nochain-reply-to'. More recent
versions of Getopt::Long, such as version 2.34, support either prefix. So
use the older form in the tests.
See also:
907a0b1e0484eeb687de3fee1fe871
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/setup: (47 commits)
setup_work_tree: adjust relative $GIT_WORK_TREE after moving cwd
git.txt: correct where --work-tree path is relative to
Revert "Documentation: always respect core.worktree if set"
t0001: test git init when run via an alias
Remove all logic from get_git_work_tree()
setup: rework setup_explicit_git_dir()
setup: clean up setup_discovered_git_dir()
t1020-subdirectory: test alias expansion in a subdirectory
setup: clean up setup_bare_git_dir()
setup: limit get_git_work_tree()'s to explicit setup case only
Use git_config_early() instead of git_config() during repo setup
Add git_config_early()
git-rev-parse.txt: clarify --git-dir
t1510: setup case #31
t1510: setup case #30
t1510: setup case #29
t1510: setup case #28
t1510: setup case #27
t1510: setup case #26
t1510: setup case #25
...
If the user's shell in NSS passwd is /bin/false (eg as found during Gentoo's
package building), the git-rebase exec tests will fail, because they call
$SHELL around the command, and in the existing testcase, $SHELL was not being
cleared sufficently.
This lead to false positive failures of t3404 on systems where the package
build user was locked down as noted above.
Signed-off-by: "Robin H. Johnson" <robbat2@gentoo.org>
X-Gentoo-Bug: 349083
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=349083
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default function name discovery already works quite well for Perl
code... with the exception of here-documents (or rather their ending).
sub foo {
print <<END
here-document
END
return 1;
}
The default funcname pattern treats the unindented END line as a
function declaration and puts it in the @@ line of diff and "grep
--show-function" output.
With a little knowledge of perl syntax, we can do better. You can
try it out by adding "*.perl diff=perl" to the gitattributes file.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When setup_work_tree() is called, it moves cwd to $GIT_WORK_TREE and
makes internal copy of $GIT_WORK_TREE absolute. The environt variable,
if set by user, remains unchanged. If the variable is relative, it is
no longer correct because its base dir has changed.
Instead of making $GIT_WORK_TREE absolute too, we just say "." and let
subsequent git processes handle it.
Reported-by: Michel Briand <michelbriand@free.fr>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX awk seems to explicitly not support hexadecimal escape sequences.
From http://pubs.opengroup.org/onlinepubs/009695399/:
Regular expressions in awk have been extended somewhat...
One sequence that is not supported is hexadecimal value escapes
beginning with '\x'.
This affects the awk on IRIX 6.5, and causes t4015.56 to fail.
Use octal instead.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "rebase --skip" is used to skip the last patch in the series, the
code to wrap up the rewrite by copying the notes from old to new commits
and also by running the post-rewrite hook was bypassed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fake filter did not read from the standard input at all,
which caused the calling side to die with SIGPIPE, depending
on the timing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rj/maint-test-fixes:
t9501-*.sh: Fix a test failure on Cygwin
lib-git-svn.sh: Add check for mis-configured web server variables
lib-git-svn.sh: Avoid setting web server variables unnecessarily
t9142: Move call to start_httpd into the setup test
t3600-rm.sh: Don't pass a non-existent prereq to test #15
* nd/maint-fix-add-typo-detection:
Revert "excluded_1(): support exclude files in index"
unpack-trees: fix sparse checkout's "unable to match directories"
unpack-trees: move all skip-worktree checks back to unpack_trees()
dir.c: add free_excludes()
cache.h: realign and use (1 << x) form for CE_* constants
Add some tests to document the correct behavior of (possibly aliased)
init when run within and outside a git directory.
If I set up a simple git alias “quietinit = init --quiet”, usually it
will work just like ‘git init --quiet’.
There are some differences, unfortunately, since in the process of
checking for aliases, git has to look for a .git/config file. If ‘git
quietinit’ is run from a subdirectory of an existing git repository,
that repository’s configuration will affect the configuration of the
new repository. In particular, the new repository can inherit
bogus values for core.bare and core.worktree.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is the most complex one among the three setup_*
functions because all GIT_DIR, GIT_WORK_TREE, core.worktree and
core.bare are involved.
Because core.worktree is only effective inside
setup_explicit_git_dir() and the extra code in setup_git_directory()
is to handle that. The extra code can now be retired.
Also note that setup_explicit assignment is removed, worktree setting
is no longer decided by get_git_work_tree(). get_git_work_tree() will
be simplified in the next commit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If core.bare is true, discard the discovered worktree, move back to
original cwd.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test for alias expansion in a subdirectory of the worktree.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_git_work_tree() takes input as core.worktree, core.bare,
GIT_WORK_TREE and decides correct worktree setting.
Unfortunately it does not do its job well. core.worktree and
GIT_WORK_TREE should only be taken into account, if GIT_DIR is set
(which is handled by setup_explicit_git_dir). For other setup cases,
only core.bare matters.
Add a temporary variable setup_explicit to adjust get_git_work_tree()
behavior as such. This variable will be gone once setup_* rework is
done.
Also remove is_bare_repository_cfg check in set_git_work_tree() to
ease the rework. We are going to check for core.bare and core.worktree
early before setting worktree. For example, if core.bare is true, no
need to set worktree.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Filtering to support keyword expansion may need the name of
the file being filtered. In particular, to support p4 keywords
like
$File: //depot/product/dir/script.sh $
the smudge filter needs to know the name of the file it is
smudging.
Allow "%f" in the custom filter command line specified in the
configuration. This will be substituted by the filename
inside a single-quote pair to be passed to the shell.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, when creating a temporary file failed, a generic 'Unable to create
temporary file' message was printed. In some cases this could lead to
confusion as to which directory should be checked for correct permissions etc.
This patch adds the template for the temporary filename to the error message,
converting it to an absolute path if needed. A test verifies that the template
is indeed printed when pointing to a nonexistent or unwritable directory.
A copy of the original template is made in case mkstemp clears the template.
Signed-off-by: Arnout Engelen <arnouten@bzzt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ks/blame-worktree-textconv-cached:
fill_textconv(): Don't get/put cache if sha1 is not valid
t/t8006: Demonstrate blame is broken when cachetextconv is on
* nd/oneline-sha1-name-from-specific-ref:
get_sha1: handle special case $commit^{/}
get_sha1: support $commit^{/regex} syntax
get_sha1_oneline: make callers prepare the commit list to traverse
get_sha1_oneline: fix lifespan rule of temp_commit_buffer variable
Unlike bash and ksh, dash passes through hexadecimal \xcc escapes.
So when run with dash, these tests *pass* (since '\xcc' is a perfectly
reasonable filename) but they are not testing what was intended.
Use octal escapes instead, in the spirit of v1.6.1-rc1~55^2
(2008-11-09).
Reported-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some shells, for example dash versions older than 0.5.4, need to
spell a variable reference as '$N' rather than 'N' in an arithmetic
expansion. In order to avoid the syntax error, we change the
offending variable reference from 'i' to '$i' in function scramble.
There is nothing bash specific to this test script (and we shouldn't
have any bash dependent test). Fix its shebang line.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After making commits (either by pulling or doing their own work) after a
failed "am", the user will be reminded by next "am" invocation that there
was a failed "am" that the user needs to decide to resolve or to get rid
of the old "am" attempt. The "am --abort" option was meant to help the
latter. However, it rewinded the HEAD back to the beginning of the failed
"am" attempt, discarding commits made (perhaps by mistake) since.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user gives "git commit --date=foobar", we silently
ignore the --date flag. We should note the error.
This patch puts the fix at the lowest level of fmt_ident,
which means it also handles GIT_AUTHOR_DATE=foobar, as well.
There are two down-sides to this approach:
1. Technically this breaks somebody doing something like
"git commit --date=now", which happened to work because
bogus data is the same as "now". Though we do
explicitly handle the empty string, so anybody passing
an empty variable through the environment will still
work.
If the error is too much, perhaps it can be downgraded
to a warning?
2. The error checking happens _after_ the commit message
is written, which can be annoying to the user. We can
put explicit checks closer to the beginning of
git-commit, but that feels a little hack-ish; suddenly
git-commit has to care about how fmt_ident works. Maybe
we could simply call fmt_ident earlier?
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When blaming files in the working tree, the filespec is marked with
!sha1_valid, as we have not given the contents an object name yet. The
function to cache textconv results (keyed on the object name), however,
didn't check this condition, and ended up on storing the cached result
under a random object name.
Cc: Axel Bonnet <axel.bonnet@ensimag.imag.fr>
Cc: Clément Poulain <clement.poulain@ensimag.imag.fr>
Cc: Diane Gasselin <diane.gasselin@ensimag.imag.fr>
Cc: Jeff King <peff@peff.net>
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I have a git repository with lots of .doc and .pdf files. There diff
works ok, but blaming is painfully slow without textconv cache, and with
textconv cache, blame says lots of lines are 'Not Yet Committed' which
is wrong.
Here is a test that demonstrates the problem.
Cc: Axel Bonnet <axel.bonnet@ensimag.imag.fr>
Cc: Clément Poulain <clement.poulain@ensimag.imag.fr>
Cc: Diane Gasselin <diane.gasselin@ensimag.imag.fr>
Cc: Jeff King <peff@peff.net>
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is unfortunate to have to issue thousands of one-byte read calls to
work around dd's refusal to buffer input that would fill a block after
a short read (a3a6f4, 2010-12-13). We could do better by using
"head -c", if it were available on all platforms we cared about.
Replace it with some simple perl.
While doing so, restructure 9300.114 to use a subshell instead of a
script. Subshells can inherit functions (like the new head_c) from
the parent shell while external scripts cannot.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This failed on the branch where it was introduced, but was fixed
by merging with 6e67619 (Merge branch 'jn/parse-options-extra').
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/fast-import-blob-access:
t9300: avoid short reads from dd
t9300: remove unnecessary use of /dev/stdin
fast-import: Allow cat-blob requests at arbitrary points in stream
fast-import: let importers retrieve blobs
fast-import: clarify documentation of "feature" command
fast-import: stricter parsing of integer options
Conflicts:
fast-import.c
* nd/extended-sha1-relpath:
get_sha1: teach ":$n:<path>" the same relative path logic
get_sha1: support relative path ":path" syntax
Make prefix_path() return char* without const
Conflicts:
sha1_name.c
* jn/maint-svn-fe:
t9010 fails when no svn is available
vcs-svn: fix intermittent repo_tree corruption
treap: make treap_insert return inserted node
t9010 (svn-fe): Eliminate dependency on svn perl bindings
This works like ":/regex" syntax that finds a recently created commit
starting from all refs, but limits the discovery to those reachable from
the named commit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first (setup) test attempts to create a file, using the
test_commit function, called 'i can has snapshot?'. On cygwin
(and MinGW) this fails with a "No such file or directory" error.
In order to fix the tests, we simply remove the '?' wildcard
from the name, since the purpose of these tests is not about
creating funny filenames.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the SVN_HTTPD_PORT variable is not set, then we will not even
attempt to start a web server in the start_httpd function (despite
it's name), so there is no need to determine values for the
SVN_HTTPD_PATH and SVN_HTTPD_MODULE_PATH variables.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to being more consistent with the other calls to
start_httpd in tests t9115-*.sh, t9118-*.sh and t9120-*.sh, this
has the added benefit of making the test less noisy. (start_httpd
writes "SVN_HTTPD_PORT is not defined!" on stderr.)
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c91cfd19 (tests: A SANITY test prereq for testing if we're
root, 2010-08-06) introduced a SANITY prerequisite which had very
similar semantics to RO_DIR. That commit removed the code to set
RO_DIR, but forgot to replace RO_DIR with SANITY in test #15.
In order not to skip test 15 unnecessarily, since RO_DIR will never
be set, we pass the SANITY prerequisite instead.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An aborted merge prints the list of rejected paths as part of the
error message. Since commit f66caaf9 (do not overwrite files in
leading path), some of those paths do not have static buffers, so
we have to keep a copy. Use string_list's to accomplish this.
This changes the order of the list to the order in which the paths
are processed. Previously, it was reversed.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the work tree contains an untracked file x, and
unpack-trees wants to checkout a path x/*, the
file x is removed unconditionally.
Instead, apply the same checks that are normally
used for untracked files, and abort if the file
cannot be removed.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the test_commit and test_path_is_missing
functions from the test library.
Also make sure that a merge which fails due to
pre-merge checks aborts properly and does not
leave MERGE_HEAD behind.
The "will not overwrite removed file" test is an
exception to this. It notices the untracked file
at a stage where the merge is already well under
way. Therefore we cannot abort the merge without
major restructuring. See the following thread for
more details.
http://mid.gmane.org/7vskopwxej.fsf@gitster.siamese.dyndns.org
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tc/http-urls-ends-with-slash:
http-fetch: rework url handling
http-push: add trailing slash at arg-parse time, instead of later on
http-push: check path length before using it
http-push: Normalise directory names when pushing to some WebDAV servers
http-backend: use end_url_with_slash()
url: add str wrapper for end_url_with_slash()
shift end_url_with_slash() from http.[ch] to url.[ch]
t5550-http-fetch: add test for http-fetch
t5550-http-fetch: add missing '&&'
* gc/http-with-non-ascii-username-url:
Fix username and password extraction from HTTP URLs
t5550: test HTTP authentication and userinfo decoding
Conflicts:
t/lib-httpd/apache.conf
Currently we have three test files matching t800?-blame.sh.
Rename the latter two to make it easier to spot where additions would
go.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are some common but minor errors we tend to make in
writing test scripts:
1. Scripts are left non-executable. This is not usually
noticed immediately because "make test" does not need
the bit, but it is a matter of git policy to make them
executable (and is a slight convenience when running
individual scripts).
2. Two scripts are allocated the same number. Usually this
happens on separate branches, and the problem only
comes about during a merge. But since there is no
textual conflict, the merger would have to be very
observant to notice.
This is also a minor error, but can make GIT_SKIP_TESTS
ambiguous.
This patch introduces a "test-lint" target which checks
both. It is not invoked by default. You can invoke it as
"make test-lint", or you can make it a prerequisite of
running the tests by specifying "TEST_LINT = test-lint" in
your config.mak or on the command line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
dd is a thin wrapper around read(2). As open group Issue 7 explains:
It shall read the input one block at a time, using the specified
input block size; it shall then process the block of data
actually returned, which could be smaller than the requested
block size.
Any short read --- for example from a pipe whose capacity cannot fill
a block --- results in that block being truncated. As a result, the
first cat-blob test (9300.114) fails on Mac OS X, where the pipe
capacity is around 8 KiB.
Fix the test by using a block size of 1. Each read will block until
the next byte of input is available.
It would be even nicer to use head -c which expresses the intention
more clearly. Alas, IRIX "head" does not support the -c option.
Reported-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tc/http-urls-ends-with-slash:
http-fetch: rework url handling
http-push: add trailing slash at arg-parse time, instead of later on
http-push: check path length before using it
http-push: Normalise directory names when pushing to some WebDAV servers
http-backend: use end_url_with_slash()
url: add str wrapper for end_url_with_slash()
shift end_url_with_slash() from http.[ch] to url.[ch]
t5550-http-fetch: add test for http-fetch
t5550-http-fetch: add missing '&&'
* jn/git-cmd-h-bypass-setup:
update-index -h: show usage even with corrupt index
merge -h: show usage even with corrupt index
ls-files -h: show usage even with corrupt index
gc -h: show usage even with broken configuration
commit/status -h: show usage even with broken configuration
checkout-index -h: show usage even in an invalid repository
branch -h: show usage even in an invalid repository
Conflicts:
builtin/merge.c
* mg/maint-tag-rfc1991:
tag: recognize rfc1991 signatures
tag: factor out sig detection for tag display
tag: factor out sig detection for body edits
verify-tag: factor out signature detection
t/t7004-tag: test handling of rfc1991 signatures
We taught the object name parser to take ":./<path>", ":../<path>", etc.
and understand them to be relative to the current working directory.
Given that ":<path>" is just a short-hand for ":0:<path>" (i.e. "take
stage #0 of that path"), we should allow ":$n:<path>" to interpret them
the same way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not depend on internal implementation details of svn,
which right now uses perl to create a .gz file.
So this test case will even work in the future,
when svn changes its implementation.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
As a first step towards preserving merges across dcommit, we need a
mechanism to update the svn:mergeinfo property.
[ew: fixed bashism and style issues in test case]
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Running test t9010 without svn currently errors out for no good reason.
The test uses "svnadmin" without checking if svn is available. This was a
regression introduced by b0ad24b (t9010 (svn-fe): Eliminate dependency on
svn perl bindings, 2010-10-10) when it stopped including ./lib-git-svn.sh
that had the safety.
This should fix it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gc/http-with-non-ascii-username-url:
Fix username and password extraction from HTTP URLs
t5550: test HTTP authentication and userinfo decoding
Conflicts:
t/lib-httpd/apache.conf
* mg/maint-tag-rfc1991:
tag: recognize rfc1991 signatures
tag: factor out sig detection for tag display
tag: factor out sig detection for body edits
verify-tag: factor out signature detection
t/t7004-tag: test handling of rfc1991 signatures
* jh/notes-merge: (23 commits)
Provide 'git merge --abort' as a synonym to 'git reset --merge'
cmd_merge(): Parse options before checking MERGE_HEAD
Provide 'git notes get-ref' to easily retrieve current notes ref
git notes merge: Add testcases for merging notes trees at different fanouts
git notes merge: Add another auto-resolving strategy: "cat_sort_uniq"
git notes merge: --commit should fail if underlying notes ref has moved
git notes merge: List conflicting notes in notes merge commit message
git notes merge: Manual conflict resolution, part 2/2
git notes merge: Manual conflict resolution, part 1/2
Documentation: Preliminary docs on 'git notes merge'
git notes merge: Add automatic conflict resolvers (ours, theirs, union)
git notes merge: Handle real, non-conflicting notes merges
builtin/notes.c: Refactor creation of notes commits.
git notes merge: Initial implementation handling trivial merges only
builtin/notes.c: Split notes ref DWIMmery into a separate function
notes.c: Use two newlines (instead of one) when concatenating notes
(trivial) t3303: Indent with tabs instead of spaces for consistency
notes.h/c: Propagate combine_notes_fn return value to add_note() and beyond
notes.h/c: Allow combine_notes functions to remove notes
notes.c: Reorder functions in preparation for next commit
...
Conflicts:
builtin.h
It is not uncommon for a svn repository to include change records for
properties at the top level of the tracked tree:
Node-path:
Node-kind: dir
Node-action: change
Prop-delta: true
Prop-content-length: 43
Content-length: 43
K 10
svn:ignore
V 11
build-area
PROPS-END
Unfortunately a recent svn-fe change (vcs-svn: More dump format sanity
checks, 2010-11-19) causes such nodes to be rejected with the error
message
fatal: invalid dump: path to be modified is missing
The repo_tree module does not keep a dirent for the root of the tree.
Add a block to the dump parser to take care of this case.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently :path and ref:path can be used to refer to a specific object
in index or ref respectively. "path" component is absolute path. This
patch allows "path" to be written as "./path" or "../path", which is
relative to user's original cwd.
This does not work in commands for which startup_info is NULL
(i.e. non-builtin ones, it seems none of them needs this anyway).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 55892d23 "git clone" itself checks that the destination path is not
a file but an empty directory if it exists, so there is no need anymore
for module_clone() to check that too.
Two tests have been added to test the behavior of "git submodule add" when
path is a file or a directory (A subshell had to be added to the former
last test to stay in the right directory).
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On the "Text Last Updated" line, "git svn info <file>" does not give the
timestamp of the commit that touched the path most recently, unlike "svn
info <file>". Do not expect the output from two commands to match on
these lines.
There was a "ptouch" attempt to transplant the timestamp from svn working
tree files to corresponding git working tree files, which mostly hid this
difference, but is made pointless now with this change. Remove the helper
function and calls to it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* pn/commit-autosquash:
add tests of commit --squash
commit: --squash option for use with rebase --autosquash
add tests of commit --fixup
commit: --fixup option for use with rebase --autosquash
pretty.c: teach format_commit_message() to reencode the output
commit: helper methods to reduce redundant blocks of code
Conflicts:
Documentation/git-commit.txt
t/t3415-rebase-autosquash.sh
We really shouldn't be using these funny /dev/* files that did not exist
in V7 UNIX in our tests when we do not have to.
Output from
$ git grep -n -e /dev/ --and --not -e /dev/null t/
tells us that, aside from use of /dev/urandom in apache.conf used in http
tests, "dd if=/dev/stdin" added recently to t/t9300-fast-import.sh are the
only offenders, and "dd" reads from the standard input by default, so
removing them should be straightforward.
Reported-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new whitespace "rule" is added that sets the tab width to use for
whitespace checks and fix-ups and replaces the hard-coded constant 8.
Since the setting is part of the rules, it can be set per file using
.gitattributes.
The new configuration is backwards compatible because older git versions
simply ignore unknown whitespace rules.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the whitespace rule tab-in-indent is enabled, apply --whitespace=fix
replaces tabs by the appropriate amount of blanks. The code used
"dst->len % 8" as the criterion to stop adding blanks. But it forgot that
dst holds more than just the current line. Consequently, the modulus was
computed correctly only for the first added line, but not for the second
and subsequent lines. Fix it.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new rule: a "cat-blob" can be inserted wherever a comment is
allowed, which means at the start of any line except in the middle of
a "data" command.
This saves frontends from having to loop over everything they want to
commit in the next commit and cat-ing the necessary objects in
advance.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New objects written by fast-import are not available immediately.
Until a checkpoint has been started and finishes writing the pack
index, any new blobs will not be accessible using standard git tools.
So introduce a new way to access them: a "cat-blob" command in the
command stream requests for fast-import to print a blob to stdout or a
file descriptor specified by the argument to --cat-blob-fd. The value
for cat-blob-fd cannot be specified in the stream because that would
be a layering violation: the decision of where to direct a stream has
to be made when fast-import is started anyway, so we might as well
make the stream format is independent of that detail.
Output uses the same format as "git cat-file --batch".
Thanks to Sverre Rabbelier and Sam Vilain for guidance in designing
the protocol.
Based-on-patch-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Barr <david.barr@cordelta.com>
Acked-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check the result from strtoul to avoid accepting arguments like
--depth=-1 and --active-branches=foo,bar,baz.
Requested-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matching index entries against an excludes file currently has two
problems.
First, there's no function to do it. Code paths (like sparse
checkout) that wanted to try it would iterate over index entries and
for each index entry pass that path to excluded_from_list(). But that
is not how excluded_from_list() works; one is supposed to feed in each
ancester of a path before a given path to find out if it was excluded
because of some parent or grandparent matching a
bigsubdirectory/
pattern despite the path not matching any .gitignore pattern directly.
Second, it's inefficient. The excludes mechanism is supposed to let
us block off vast swaths of the filesystem as uninteresting; separately
checking every index entry doesn't fit that model.
Introduce a new function to take care of both these problems. This
traverses the index in depth-first order (well, that's what order the
index is in) to mark un-excluded entries.
Maybe some day the in-core index format will be restructured to make
this sort of operation easier. Or maybe we will want to try some
binary search based thing. The interface is simple enough to allow
all those things. Example:
clear_ce_flags(the_index.cache, the_index.cache_nr,
CE_CANDIDATE, CE_CLEARME, exclude_list);
would clear the CE_CLEARME flag on all index entries with
CE_CANDIDATE flag and not matched by exclude_list.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cb/leading-path-removal:
use persistent memory for rejected paths
do not overwrite files in leading path
lstat_cache: optionally return match_len
add function check_ok_to_remove()
t7607: add leading-path tests
t7607: use test-lib functions and check MERGE_HEAD
Conflicts:
t/t7607-merge-overwrite.sh
* en/merge-recursive: (41 commits)
t6022: Use -eq not = to test output of wc -l
merge-recursive:make_room_for_directories - work around dumb compilers
merge-recursive: Remove redundant path clearing for D/F conflicts
merge-recursive: Make room for directories in D/F conflicts
handle_delete_modify(): Check whether D/F conflicts are still present
merge_content(): Check whether D/F conflicts are still present
conflict_rename_rename_1to2(): Fix checks for presence of D/F conflicts
conflict_rename_delete(): Check whether D/F conflicts are still present
merge-recursive: Delay modify/delete conflicts if D/F conflict present
merge-recursive: Delay content merging for renames
merge-recursive: Delay handling of rename/delete conflicts
merge-recursive: Move handling of double rename of one file to other file
merge-recursive: Move handling of double rename of one file to two
merge-recursive: Avoid doubly merging rename/add conflict contents
merge-recursive: Update merge_content() call signature
merge-recursive: Update conflict_rename_rename_1to2() call signature
merge-recursive: Structure process_df_entry() to handle more cases
merge-recursive: Have process_entry() skip D/F or rename entries
merge-recursive: New function to assist resolving renames in-core only
merge-recursive: New data structures for deferring of D/F conflicts
...
Conflicts:
t/t6020-merge-df.sh
t/t6036-recursive-corner-cases.sh
* jn/fast-import-fix:
fast-import: do not clear notes in do_change_note_fanout()
t9300 (fast-import): another test for the "replace root" feature
fast-import: tighten M 040000 syntax
fast-import: filemodify after M 040000 <tree> "" crashes
You can tell "git status" to paint the name of the current branch in its
output (the line that says "On branch ...") by setting the configuration
variable color.status.branch; it is by default turned off.
Signed-off-by: Aleksi Aalto <aga@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since c85c792 (pull --rebase: be cleverer with rebased upstream
branches, 2008-01-26), "git pull --rebase" has used the reflog to try to
rebase from the old upstream onto the new upstream.
Make this work if the local repository is explicitly passed on the
command line as in 'git pull --rebase . foo'.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Acked-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
