The `--bisect-write` subcommand is no longer used from the
git-bisect.sh shell script. Instead the function `bisect_write()`
is directly called from the C implementation.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement the `bisect_replay` shell function in C and also add
`--bisect-replay` subcommand to `git bisect--helper` to call it from
git-bisect.sh
Using `--bisect-replay` subcommand is a temporary measure to port shell
function to C so as to use the existing test suite.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement the `bisect_log()` shell function in C and also add
`--bisect-log` subcommand to `git bisect--helper` to call it from
git-bisect.sh .
Using `--bisect-log` subcommand is a temporary measure to port shell
function to C so as to use the existing test suite.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following sequence leads to a "BUG" assertion running under MacOS:
DIR=git-test-restore-p
Adiarnfd=$(printf 'A\314\210')
DIRNAME=xx${Adiarnfd}yy
mkdir $DIR &&
cd $DIR &&
git init &&
mkdir $DIRNAME &&
cd $DIRNAME &&
echo "Initial" >file &&
git add file &&
echo "One more line" >>file &&
echo y | git restore -p .
Initialized empty Git repository in /tmp/git-test-restore-p/.git/
BUG: pathspec.c:495: error initializing pathspec_item
Cannot close git diff-index --cached --numstat
[snip]
The command `git restore` is run from a directory inside a Git repo.
Git needs to split the $CWD into 2 parts:
The path to the repo and "the rest", if any.
"The rest" becomes a "prefix" later used inside the pathspec code.
As an example, "/path/to/repo/dir-inside-repå" would determine
"/path/to/repo" as the root of the repo, the place where the
configuration file .git/config is found.
The rest becomes the prefix ("dir-inside-repå"), from where the
pathspec machinery expands the ".", more about this later.
If there is a decomposed form, (making the decomposing visible like this),
"dir-inside-rep°a" doesn't match "dir-inside-repå".
Git commands need to:
(a) read the configuration variable "core.precomposeunicode"
(b) precocompose argv[]
(c) precompose the prefix, if there was any
The first commit,
76759c7dff "git on Mac OS and precomposed unicode"
addressed (a) and (b).
The call to precompose_argv() was added into parse-options.c,
because that seemed to be a good place when the patch was written.
Commands that don't use parse-options need to do (a) and (b) themselfs.
The commands `diff-files`, `diff-index`, `diff-tree` and `diff`
learned (a) and (b) in
commit 90a78b83e0 "diff: run arguments through precompose_argv"
Branch names (or refs in general) using decomposed code points
resulting in decomposed file names had been fixed in
commit 8e712ef6fc "Honor core.precomposeUnicode in more places"
The bug report from above shows 2 things:
- more commands need to handle precomposed unicode
- (c) should be implemented for all commands using pathspecs
Solution:
precompose_argv() now handles the prefix (if needed), and is renamed into
precompose_argv_prefix().
Inside this function the config variable core.precomposeunicode is read
into the global variable precomposed_unicode, as before.
This reading is skipped if precomposed_unicode had been read before.
The original patch for preocomposed unicode, 76759c7dff, placed
precompose_argv() into parse-options.c
Now add it into git.c::run_builtin() as well. Existing precompose
calls in diff-files.c and others may become redundant, and if we
audit the callflows that reach these places to make sure that they
can never be reached without going through the new call added to
run_builtin(), we might be able to remove these existing ones.
But in this commit, we do not bother to do so and leave these
precompose callsites as they are. Because precompose() is
idempotent and can be called on an already precomposed string
safely, this is safer than removing existing calls without fully
vetting the callflows.
There is certainly room for cleanups - this change intends to be a bug fix.
Cleanups needs more tests in e.g. t/t3910-mac-os-precompose.sh, and should
be done in future commits.
[1] git-bugreport-2021-01-06-1209.txt (git can't deal with special characters)
[2] https://lore.kernel.org/git/A102844A-9501-4A86-854D-E3B387D378AA@icloud.com/
Reported-by: Daniel Troger <random_n0body@icloud.com>
Helped-By: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree list" annotates each worktree according to its state such
as "prunable" or "locked", however it is not immediately obvious why
these worktrees are being annotated. For prunable worktrees a reason
is available that is returned by should_prune_worktree() and for locked
worktrees a reason might be available provided by the user via `lock`
command.
Let's teach "git worktree list" a --verbose mode that outputs the reason
why the worktrees are being annotated. The reason is a text that can take
virtually any size and appending the text on the default columned format
will make it difficult to extend the command with other annotations and
not fit nicely on the screen. In order to address this shortcoming the
annotation is then moved to the next line indented followed by the reason
If the reason is not available the annotation stays on the same line as
the worktree itself.
The output of "git worktree list" with verbose becomes like so:
$ git worktree list --verbose
...
/path/to/locked-no-reason acb124 [branch-a] locked
/path/to/locked-with-reason acc125 [branch-b]
locked: worktree with a locked reason
/path/to/prunable-reason ace127 [branch-d]
prunable: gitdir file points to non-existent location
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git worktree list" command shows the absolute path to the worktree,
the commit that is checked out, the name of the branch, and a "locked"
annotation if the worktree is locked, however, it does not indicate
whether the worktree is prunable.
The "prune" command will remove a worktree if it is prunable unless
`--dry-run` option is specified. This could lead to a worktree being
removed without the user realizing before it is too late, in case the
user forgets to pass --dry-run for instance. If the "list" command shows
which worktree is prunable, the user could verify before running
"git worktree prune" and hopefully prevents the working tree to be
removed "accidentally" on the worse case scenario.
Let's teach "git worktree list" to show when a worktree is a prunable
candidate for both default and porcelain format.
In the default format a "prunable" text is appended:
$ git worktree list
/path/to/main aba123 [main]
/path/to/linked 123abc [branch-a]
/path/to/prunable ace127 (detached HEAD) prunable
In the --porcelain format a prunable label is added followed by
its reason:
$ git worktree list --porcelain
...
worktree /path/to/prunable
HEAD abc1234abc1234abc1234abc1234abc1234abc12
detached
prunable gitdir file points to non-existent location
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c57b3367be (worktree: teach `list` to annotate locked worktree,
2020-10-11) taught "git worktree list" to annotate locked worktrees by
appending "locked" text to its output, however, this is not listed in
the --porcelain format.
Teach "list --porcelain" to do the same and add a "locked" attribute
followed by its reason, thus making both default and porcelain format
consistent. If the locked reason is not available then only "locked"
is shown.
The output of the "git worktree list --porcelain" becomes like so:
$ git worktree list --porcelain
...
worktree /path/to/locked
HEAD 123abcdea123abcd123acbd123acbda123abcd12
detached
locked
worktree /path/to/locked-with-reason
HEAD abc123abc123abc123abc123abc123abc123abc1
detached
locked reason why it is locked
...
In porcelain mode, if the lock reason contains special characters
such as newlines, they are escaped with backslashes and the entire
reason is enclosed in double quotes. For example:
$ git worktree list --porcelain
...
locked "worktree's path mounted in\nremovable device"
...
Furthermore, let's update the documentation to state that some
attributes in the porcelain format might be listed alone or together
with its value depending whether the value is available or not. Thus
documenting the case of the new "locked" attribute.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
worktree_lock_reason() aborts with an assertion failure when called on
the main worktree since locking the main worktree is nonsensical. Not
only is this behavior undocumented, thus callers might not even be aware
that the call could potentially crash the program, but it also forces
clients to be extra careful:
if (!is_main_worktree(wt) && worktree_locked_reason(...))
...
Since we know that locking makes no sense in the context of the main
worktree, we can simply return false for the main worktree, thus making
client code less complex by eliminating the need for the callers to have
inside knowledge about the implementation:
if (worktree_lock_reason(...))
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of teaching "git worktree list" to annotate worktree that is a
candidate for pruning, let's move should_prune_worktree() from
builtin/worktree.c to worktree.c in order to make part of the worktree
public API.
should_prune_worktree() knows how to select the given worktree for
pruning based on an expiration date, however the expiration value is
stored in a static file-scope variable and it is not local to the
function. In order to move the function, teach should_prune_worktree()
to take the expiration date as an argument and document the new
parameter that is not immediately obvious.
Also, change the function comment to clearly state that the worktree's
path is returned in `wtpath` argument.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are looking up an oid in an array, we obviously don't need to
write to the array. Let's mark it as const in the function interfaces,
as well as in the local variables we use to derference the void pointer
(note a few cases use pointers-to-pointers, so we mark everything
const).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of our callers are actually looking up an object_id, not a bare
hash. Likewise, the arrays they are looking in are actual arrays of
object_id (not just raw bytes of hashes, as we might find in a pack
.idx; those are handled by bsearch_hash()).
Using an object_id gives us more type safety, and makes the callers
slightly shorter. It also gets rid of the word "sha1" from several
access functions, though we could obviously also rename those with
s/sha1/hash/.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when called with exactly two arguments, `git range-diff`
tests for a literal `..` in each of the two. Likewise, the argument
provided via `--range-diff` to `git format-patch` is checked in the same
manner.
However, `<commit>^!` is a perfectly valid commit range, equivalent to
`<commit>^..<commit>` according to the `SPECIFYING RANGES` section of
gitrevisions[7].
In preparation for allowing more sophisticated ways to specify commit
ranges, let's refactor the check into its own function.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the hidden "grep --debug" and "log --grep-debug" options added
in 17bf35a3c7 (grep: teach --debug option to dump the parse tree,
2012-09-13).
At the time these options seem to have been intended to go along with
a documentation discussion and to help the author of relevant tests to
perform ad-hoc debugging on them[1].
Reasons to want this gone:
1. They were never documented, and the only (rather trivial) use of
them in our own codebase for testing is something I removed back
in e01b4dab01 (grep: change non-ASCII -i test to stop using
--debug, 2017-05-20).
2. Googling around doesn't show any in-the-wild uses I could dig up,
and on the Git ML the only mentions after the original discussion
seem to have been when they came up in unrelated diff contexts, or
that test commit of mine.
3. An exception to that is c581e4a749 (grep: under --debug, show
whether PCRE JIT is enabled, 2019-08-18) where we added the
ability to dump out when PCREv2 has the JIT in effect.
The combination of that and my earlier b65abcafc7 (grep: use PCRE
v2 for optimized fixed-string search, 2019-07-01) means Git prints
this out in its most common in-the-wild configuration:
$ git log --grep-debug --grep=foo --grep=bar --grep=baz --all-match
pcre2_jit_on=1
pcre2_jit_on=1
pcre2_jit_on=1
[all-match]
(or
pattern_body<body>foo
(or
pattern_body<body>bar
pattern_body<body>baz
)
)
$ git grep --debug \( -e foo --and -e bar \) --or -e baz
pcre2_jit_on=1
pcre2_jit_on=1
pcre2_jit_on=1
(or
(and
patternfoo
patternbar
)
patternbaz
)
I.e. for each pattern we're considering for the and/or/--all-match
etc. debugging we'll now diligently spew out another identical line
saying whether the PCREv2 JIT is on or not.
I think that nobody's complained about that rather glaringly obviously
bad output says something about how much this is used, i.e. it's
not.
The need for this debugging aid for the composed grep/log patterns
seems to have passed, and the desire to dump the JIT config seems to
have been another one-off around the time we had JIT-related issues on
the PCREv2 codepath. That the original author of this debugging
facility seemingly hasn't noticed the bad output since then[2] is
probably some indicator.
1. https://lore.kernel.org/git/cover.1347615361.git.git@drmicha.warpmail.net/
2. https://lore.kernel.org/git/xmqqk1b8x0ac.fsf@gitster-ct.c.googlers.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new option that unconditionally enables the pack.writeReverseIndex
setting in order to run the whole test suite in a mode that generates
on-disk reverse indexes. Additionally, enable this mode in the second
run of tests under linux-gcc in 'ci/run-build-and-tests.sh'.
Once on-disk reverse indexes are proven out over several releases, we
can change the default value of that configuration to 'true', and drop
this patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have an implementation that can write the new reverse index
format, enable writing a .rev file in 'git pack-objects' by consulting
the pack.writeReverseIndex configuration variable.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach 'git index-pack' to optionally write and verify reverse index with
'--[no-]rev-index', as well as respecting the 'pack.writeReverseIndex'
configuration option.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To derive the filename for a .idx file, 'git index-pack' uses
derive_filename() to strip the '.pack' suffix and add the new suffix.
Prepare for stripping off suffixes other than '.pack' by making the
suffix to strip a parameter of derive_filename(). In order to make this
consistent with the "suffix" parameter which does not begin with a ".",
an additional check in derive_filename.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Specify the format of the on-disk reverse index 'pack-*.rev' file, as
well as prepare the code for the existence of such files.
The reverse index maps from pack relative positions (i.e., an index into
the array of object which is sorted by their offsets within the
packfile) to their position within the 'pack-*.idx' file. Today, this is
done by building up a list of (off_t, uint32_t) tuples for each object
(the off_t corresponding to that object's offset, and the uint32_t
corresponding to its position in the index). To convert between pack and
index position quickly, this array of tuples is radix sorted based on
its offset.
This has two major drawbacks:
First, the in-memory cost scales linearly with the number of objects in
a pack. Each 'struct revindex_entry' is sizeof(off_t) +
sizeof(uint32_t) + padding bytes for a total of 16.
To observe this, force Git to load the reverse index by, for e.g.,
running 'git cat-file --batch-check="%(objectsize:disk)"'. When asking
for a single object in a fresh clone of the kernel, Git needs to
allocate 120+ MB of memory in order to hold the reverse index in memory.
Second, the cost to sort also scales with the size of the pack.
Luckily, this is a linear function since 'load_pack_revindex()' uses a
radix sort, but this cost still must be paid once per pack per process.
As an example, it takes ~60x longer to print the _size_ of an object as
it does to print that entire object's _contents_:
Benchmark #1: git.compile cat-file --batch <obj
Time (mean ± σ): 3.4 ms ± 0.1 ms [User: 3.3 ms, System: 2.1 ms]
Range (min … max): 3.2 ms … 3.7 ms 726 runs
Benchmark #2: git.compile cat-file --batch-check="%(objectsize:disk)" <obj
Time (mean ± σ): 210.3 ms ± 8.9 ms [User: 188.2 ms, System: 23.2 ms]
Range (min … max): 193.7 ms … 224.4 ms 13 runs
Instead, avoid computing and sorting the revindex once per process by
writing it to a file when the pack itself is generated.
The format is relatively straightforward. It contains an array of
uint32_t's, the length of which is equal to the number of objects in the
pack. The ith entry in this table contains the index position of the
ith object in the pack, where "ith object in the pack" is determined by
pack offset.
One thing that the on-disk format does _not_ contain is the full (up to)
eight-byte offset corresponding to each object. This is something that
the in-memory revindex contains (it stores an off_t in 'struct
revindex_entry' along with the same uint32_t that the on-disk format
has). Omit it in the on-disk format, since knowing the index position
for some object is sufficient to get a constant-time lookup in the
pack-*.idx file to ask for an object's offset within the pack.
This trades off between the on-disk size of the 'pack-*.rev' file for
runtime to chase down the offset for some object. Even though the lookup
is constant time, the constant is heavier, since it can potentially
involve two pointer walks in v2 indexes (one to access the 4-byte offset
table, and potentially a second to access the double wide offset table).
Consider trying to map an object's pack offset to a relative position
within that pack. In a cold-cache scenario, more page faults occur while
switching between binary searching through the reverse index and
searching through the *.idx file for an object's offset. Sure enough,
with a cold cache (writing '3' into '/proc/sys/vm/drop_caches' after
'sync'ing), printing out the entire object's contents is still
marginally faster than printing its size:
Benchmark #1: git.compile cat-file --batch-check="%(objectsize:disk)" <obj >/dev/null
Time (mean ± σ): 22.6 ms ± 0.5 ms [User: 2.4 ms, System: 7.9 ms]
Range (min … max): 21.4 ms … 23.5 ms 41 runs
Benchmark #2: git.compile cat-file --batch <obj >/dev/null
Time (mean ± σ): 17.2 ms ± 0.7 ms [User: 2.8 ms, System: 5.5 ms]
Range (min … max): 15.6 ms … 18.2 ms 45 runs
(Numbers taken in the kernel after cheating and using the next patch to
generate a reverse index). There are a couple of approaches to improve
cold cache performance not pursued here:
- We could include the object offsets in the reverse index format.
Predictably, this does result in fewer page faults, but it triples
the size of the file, while simultaneously duplicating a ton of data
already available in the .idx file. (This was the original way I
implemented the format, and it did show
`--batch-check='%(objectsize:disk)'` winning out against `--batch`.)
On the other hand, this increase in size also results in a large
block-cache footprint, which could potentially hurt other workloads.
- We could store the mapping from pack to index position in more
cache-friendly way, like constructing a binary search tree from the
table and writing the values in breadth-first order. This would
result in much better locality, but the price you pay is trading
O(1) lookup in 'pack_pos_to_index()' for an O(log n) one (since you
can no longer directly index the table).
So, neither of these approaches are taken here. (Thankfully, the format
is versioned, so we are free to pursue these in the future.) But, cold
cache performance likely isn't interesting outside of one-off cases like
asking for the size of an object directly. In real-world usage, Git is
often performing many operations in the revindex (i.e., asking about
many objects rather than a single one).
The trade-off is worth it, since we will avoid the vast majority of the
cost of generating the revindex that the extra pointer chase will look
like noise in the following patch's benchmarks.
This patch describes the format and prepares callers (like in
pack-revindex.c) to be able to read *.rev files once they exist. An
implementation of the writer will appear in the next patch, and callers
will gradually begin to start using the writer in the patches that
follow after that.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Abstract accesses to in-core revindex that allows enumerating
objects stored in a packfile in the order they appear in the pack,
in preparation for introducing an on-disk precomputed revindex.
* tb/pack-revindex-api: (21 commits)
for_each_object_in_pack(): clarify pack vs index ordering
pack-revindex.c: avoid direct revindex access in 'offset_to_pack_pos()'
pack-revindex: hide the definition of 'revindex_entry'
pack-revindex: remove unused 'find_revindex_position()'
pack-revindex: remove unused 'find_pack_revindex()'
builtin/gc.c: guess the size of the revindex
for_each_object_in_pack(): convert to new revindex API
unpack_entry(): convert to new revindex API
packed_object_info(): convert to new revindex API
retry_bad_packed_offset(): convert to new revindex API
get_delta_base_oid(): convert to new revindex API
rebuild_existing_bitmaps(): convert to new revindex API
try_partial_reuse(): convert to new revindex API
get_size_by_pos(): convert to new revindex API
show_objects_for_type(): convert to new revindex API
bitmap_position_packfile(): convert to new revindex API
check_object(): convert to new revindex API
write_reused_pack_verbatim(): convert to new revindex API
write_reused_pack_one(): convert to new revindex API
write_reuse_object(): convert to new revindex API
...
A bit of code refactoring.
* cc/write-promisor-file:
pack-write: die on error in write_promisor_file()
fetch-pack: refactor writing promisor file
fetch-pack: rename helper to create_promisor_file()
Clean-up docs, codepaths and tests around mailmap.
* ab/mailmap: (22 commits)
shortlog: remove unused(?) "repo-abbrev" feature
mailmap doc + tests: document and test for case-insensitivity
mailmap tests: add tests for empty "<>" syntax
mailmap tests: add tests for whitespace syntax
mailmap tests: add a test for comment syntax
mailmap doc + tests: add better examples & test them
tests: refactor a few tests to use "test_commit --append"
test-lib functions: add an --append option to test_commit
test-lib functions: add --author support to test_commit
test-lib functions: document arguments to test_commit
test-lib functions: expand "test_commit" comment template
mailmap: test for silent exiting on missing file/blob
mailmap tests: get rid of overly complex blame fuzzing
mailmap tests: add a test for "not a blob" error
mailmap tests: remove redundant entry in test
mailmap tests: improve --stdin tests
mailmap tests: modernize syntax & test idioms
mailmap tests: use our preferred whitespace syntax
mailmap doc: start by mentioning the comment syntax
check-mailmap doc: note config options
...
"git fetch" learns to treat ref updates atomically in all-or-none
fashion, just like "git push" does, with the new "--atomic" option.
* ps/fetch-atomic:
fetch: implement support for atomic reference updates
fetch: allow passing a transaction to `s_update_ref()`
fetch: refactor `s_update_ref` to use common exit path
fetch: use strbuf to format FETCH_HEAD updates
fetch: extract writing to FETCH_HEAD
Warn loudly when the "pack-redundant" command, which has been left
stale with almost unusable performance issues, gets used, as we no
longer want to recommend its use (instead just "repack -d" instead).
* jc/deprecate-pack-redundant:
pack-redundant: gauge the usage before proposing its removal
The implementation of "git branch --sort" wrt the detached HEAD
display has always been hacky, which has been cleaned up.
* ab/branch-sort:
branch: show "HEAD detached" first under reverse sort
branch: sort detached HEAD based on a flag
ref-filter: move ref_sorting flags to a bitfield
ref-filter: move "cmp_fn" assignment into "else if" arm
ref-filter: add braces to if/else if/else chain
branch tests: add to --sort tests
branch: change "--local" to "--list" in comment
"git mktag" validates its input using its own rules before writing
a tag object---it has been updated to share the logic with "git
fsck".
* ab/mktag: (23 commits)
mktag: add a --[no-]strict option
mktag: mark strings for translation
mktag: convert to parse-options
mktag: allow omitting the header/body \n separator
mktag: allow turning off fsck.extraHeaderEntry
fsck: make fsck_config() re-usable
mktag: use fsck instead of custom verify_tag()
mktag: use puts(str) instead of printf("%s\n", str)
mktag: remove redundant braces in one-line body "if"
mktag: use default strbuf_read() hint
mktag tests: test verify_object() with replaced objects
mktag tests: improve verify_object() test coverage
mktag tests: test "hash-object" compatibility
mktag tests: stress test whitespace handling
mktag tests: run "fsck" after creating "mytag"
mktag tests: don't create "mytag" twice
mktag tests: don't redirect stderr to a file needlessly
mktag tests: remove needless SHA-1 hardcoding
mktag tests: use "test_commit" helper
mktag tests: don't needlessly use a subshell
...
A future feature will want to load the sparse-checkout patterns into a
pattern_list, but the current mechanism to do so is a bit complicated.
This is made difficult due to needing to find the sparse-checkout file
in different ways throughout the codebase.
The logic implemented in the new get_sparse_checkout_patterns() was
duplicated in populate_from_existing_patterns() in unpack-trees.c. Use
the new method instead, keeping the logic around handling the struct
unpack_trees_options.
The callers to get_sparse_checkout_filename() in
builtin/sparse-checkout.c manipulate the sparse-checkout file directly,
so it is not appropriate to replace logic in that file with
get_sparse_checkout_patterns().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the method safer by allocating a cache_tree member for the given
index_state if it is not already present. This is preferrable to a
BUG() statement or returning with an error because future callers will
want to populate an empty cache-tree using this method.
Callers can also remove their conditional allocations of cache_tree.
Also drop local variables that can be found directly from the 'istate'
parameter.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During a merge conflict, the name of a file may appear multiple
times in "git ls-files" output, once for each stage. If you use
both `--delete` and `--modify` at the same time, the output may
mention a deleted file twice.
When none of the '-t', '-u', or '-s' options is in use, these
duplicate entries do not add much value to the output.
Introduce a new '--deduplicate' option to suppress them.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
[jc: extended doc and rewritten commit log]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will make it easier to show only one entry per filename in the
next step.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
[jc: corrected the log message]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This situation may occur in the original code: lstat() failed
but we use `&st` to feed ie_modified() later.
Therefore, we can directly execute show_ce without the judgment of
ie_modified() when lstat() has failed.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
[jc: fixed misindented code]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git-pack-objects, we iterate over all the tags if the --include-tag
option is passed on the command line. For some reason this uses
for_each_ref which is expensive if the repo has many refs. We should
use for_each_tag_ref instead.
Because the add_ref_tag callback will now only visit tags we
simplified it a bit.
The motivation for this change is that we observed performance issues
with a repository on gitlab.com that has 500,000 refs but only 2,000
tags. The fetch traffic on that repo is dominated by CI, and when we
changed CI to fetch with 'git fetch --no-tags' we saw a dramatic
change in the CPU profile of git-pack-objects. This lead us to this
particular ref walk. More details in:
https://gitlab.com/gitlab-com/gl-infra/scalability/-/issues/746#note_483546598
Signed-off-by: Jacob Vosmaer <jacob@gitlab.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git tag -d' accepts one or more tag refs to delete, but each deletion
is done by calling `delete_ref` on each argv. This is very slow when
removing from packed refs. Use delete_refs instead so all the removals
can be done inside a single transaction with a single update.
Do the same for 'git branch -d'.
Since delete_refs performs all the packed-refs delete operations
inside a single transaction, if any of the deletes fail then all
them will be skipped. In practice, none of them should fail since
we verify the hash of each one before calling delete_refs, but some
network error or odd permissions problem could have different results
after this change.
Also, since the file-backed deletions are not performed in the same
transaction, those could succeed even when the packed-refs transaction
fails.
After deleting branches, remove the branch config only if the branch
ref was removed and was not subsequently added back in.
A manual test deleting 24,000 tags took about 30 minutes using
delete_ref. It takes about 5 seconds using delete_refs.
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phil Hord <phil.hord@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The peel_ref() interface is confusing and error-prone:
- it's typically used by ref iteration callbacks that have both a
refname and oid. But since they pass only the refname, we may load
the ref value from the filesystem again. This is inefficient, but
also means we are open to a race if somebody simultaneously updates
the ref. E.g., this:
int some_ref_cb(const char *refname, const struct object_id *oid, ...)
{
if (!peel_ref(refname, &peeled))
printf("%s peels to %s",
oid_to_hex(oid), oid_to_hex(&peeled);
}
could print nonsense. It is correct to say "refname peels to..."
(you may see the "before" value or the "after" value, either of
which is consistent), but mentioning both oids may be mixing
before/after values.
Worse, whether this is possible depends on whether the optimization
to read from the current iterator value kicks in. So it is actually
not possible with:
for_each_ref(some_ref_cb);
but it _is_ possible with:
head_ref(some_ref_cb);
which does not use the iterator mechanism (though in practice, HEAD
should never peel to anything, so this may not be triggerable).
- it must take a fully-qualified refname for the read_ref_full() code
path to work. Yet we routinely pass it partial refnames from
callbacks to for_each_tag_ref(), etc. This happens to work when
iterating because there we do not call read_ref_full() at all, and
only use the passed refname to check if it is the same as the
iterator. But the requirements for the function parameters are quite
unclear.
Instead of taking a refname, let's instead take an oid. That fixes both
problems. It's a little funny for a "ref" function not to involve refs
at all. The key thing is that it's optimizing under the hood based on
having access to the ref iterator. So let's change the name to make it
clear why you'd want this function versus just peel_object().
There are two other directions I considered but rejected:
- we could pass the peel information into the each_ref_fn callback.
However, we don't know if the caller actually wants it or not. For
packed-refs, providing it is essentially free. But for loose refs,
we actually have to peel the object, which would be wasteful in most
cases. We could likewise pass in a flag to the callback indicating
whether the peeled information is known, but that complicates those
callbacks, as they then have to decide whether to manually peel
themselves. Plus it requires changing the interface of every
callback, whether they care about peeling or not, and there are many
of them.
- we could make a function to return the peeled value of the current
iterated ref (computing it if necessary), and BUG() otherwise. I.e.:
int peel_current_iterated_ref(struct object_id *out);
Each of the current callers is an each_ref_fn callback, so they'd
mostly be happy. But:
- we use those callbacks with functions like head_ref(), which do
not use the iteration code. So we'd need to handle the fallback
case there, anyway.
- it's possible that a caller would want to call into generic code
that sometimes is used during iteration and sometimes not. This
encapsulates the logic to do the fast thing when possible, and
fallback when necessary.
The implementation is mostly obvious, but I want to call out a few
things in the patch:
- the test-tool coverage for peel_ref() is now meaningless, as it all
collapses to a single peel_object() call (arguably they were pretty
uninteresting before; the tricky part of that function is the
fast-path we see during iteration, but these calls didn't trigger
that). I've just dropped it entirely, though note that some other
tests relied on the tags we created; I've moved that creation to the
tests where it matters.
- we no longer need to take a ref_store parameter, since we'd never
look up a ref now. We do still rely on a global "current iterator"
variable which _could_ be kept per-ref-store. But in practice this
is only useful if there are multiple recursive iterations, at which
point the more appropriate solution is probably a stack of
iterators. No caller used the actual ref-store parameter anyway
(they all call the wrapper that passes the_repository).
- the original only kicked in the optimization when the "refname"
pointer matched (i.e., not string comparison). We do likewise with
the "oid" parameter here, but fall back to doing an actual oideq()
call. This in theory lets us kick in the optimization more often,
though in practice no current caller cares. It should never be
wrong, though (peeling is a property of an object, so two refs
pointing to the same object would peel identically).
- the original took care not to touch the peeled out-parameter unless
we found something to put in it. But no caller cares about this, and
anyway, it is enforced by peel_object() itself (and even in the
optimized iterator case, that's where we eventually end up). We can
shorten the code and avoid an extra copy by just passing the
out-parameter through the stack.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'prefetch' task fetches refs from all remotes and places them in the
refs/prefetch/<remote>/ refspace. As this task is intended to run in the
background, this allows users to keep their local data very close to the
remote servers' data while not updating the users' understanding of the
remote refs in refs/remotes/<remote>/.
However, this can clutter 'git log' decorations with copies of the refs
with the full name 'refs/prefetch/<remote>/<branch>'.
The log.excludeDecoration config option was added in a6be5e67 (log: add
log.excludeDecoration config option, 2020-05-16) for exactly this
purpose.
Ensure we set this only for users that would benefit from it by
assigning it at the beginning of the prefetch task. Other alternatives
would be during 'git maintenance register' or 'git maintenance start',
but those might assign the config even when the prefetch task is
disabled by existing config. Further, users could run 'git maintenance
run --task=prefetch' using their own scripting or scheduling. This
provides the best coverage to automatically update the config when
valuable.
It is improbable, but possible, that users might want to run the
prefetch task _and_ see these refs in their log decorations. This seems
incredibly unlikely to me, but users can always opt-in on a
command-by-command basis using --decorate-refs=refs/prefetch/.
Test that this works in a few cases. In particular, ensure that our
assignment of log.excludeDecoration=refs/prefetch/ is additive to other
existing exclusions. Further, ensure we do not add multiple copies in
multiple runs.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git for-each-repo --config=<var> <cmd>" should not run <cmd> for
any repository when the configuration variable <var> is not defined
even once.
* ds/for-each-repo-noopfix:
for-each-repo: do nothing on empty config
Follow-up on the "maintenance part-3" which introduced scheduled
maintenance tasks to support platforms whose native scheduling
methods are not 'cron'.
* ds/maintenance-part-4:
maintenance: use Windows scheduled tasks
maintenance: use launchctl on macOS
maintenance: include 'cron' details in docs
maintenance: extract platform-specific scheduling
"git stash" did not work well in a sparsely checked out working
tree.
* en/stash-apply-sparse-checkout:
stash: fix stash application in sparse-checkouts
stash: remove unnecessary process forking
t7012: add a testcase demonstrating stash apply bugs in sparse checkouts
Retire more names with "sha1" in it.
* ma/sha1-is-a-hash:
hash-lookup: rename from sha1-lookup
sha1-lookup: rename `sha1_pos()` as `hash_pos()`
object-file.c: rename from sha1-file.c
object-name.c: rename from sha1-name.c
"git rev-parse" can be explicitly told to give output as absolute
or relative path with the `--path-format=(absolute|relative)` option.
* bc/rev-parse-path-format:
rev-parse: add option for absolute or relative path formatting
abspath: add a function to resolve paths with missing components
'estimate_repack_memory()' takes into account the amount of memory
required to load the reverse index in memory by multiplying the assumed
number of objects by the size of the 'revindex_entry' struct.
Prepare for hiding the definition of 'struct revindex_entry' by removing
a 'sizeof()' of that type from outside of pack-revindex.c. Instead,
guess that one off_t and one uint32_t are required per object. Strictly
speaking, this is a worse guess than asking for 'sizeof(struct
revindex_entry)' directly, since the true size of this struct is 16
bytes with padding on the end of the struct in order to align the offset
field.
But, this is an approximation anyway, and it does remove a use of the
'struct revindex_entry' from outside of pack-revindex internals.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace direct accesses to the revindex with calls to
'offset_to_pack_pos()' and 'pack_pos_to_index()'.
Since this caller already had some error checking (it can jump to the
'give_up' label if it encounters an error), we can easily check whether
or not the provided offset points to an object in the given pack. This
error checking existed prior to this patch, too, since the caller checks
whether the return value from 'find_pack_revindex()' was NULL or not.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace a direct access to the revindex array with
'pack_pos_to_offset()'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace direct revindex accesses with calls to 'pack_pos_to_offset()'
and 'pack_pos_to_index()'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
First replace 'find_pack_revindex()' with its replacement
'offset_to_pack_pos()'. This prevents any bogus OFS_DELTA that may make
its way through until 'write_reuse_object()' from causing a bad memory
read (if 'revidx' is 'NULL')
Next, replace a direct access of '->nr' with the wrapper function
'pack_pos_to_index()'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's replace the 2 different pieces of code that write a
promisor file in 'builtin/repack.c' and 'fetch-pack.c'
with a new function called 'write_promisor_file()' in
'pack-write.c' and 'pack.h'.
This might also help us in the future, if we want to put
back the ref names and associated hashes that were in
the promisor files we are repacking in 'builtin/repack.c'
as suggested by a NEEDSWORK comment just above the code
we are refactoring.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove support for the magical "repo-abbrev" comment in .mailmap
files. This was added to .mailmap parsing in [1], as a generalized
feature of the git-shortlog Perl script added earlier in [2].
There was no documentation or tests for this feature, and I don't
think it's used in practice anymore.
What it did was to allow you to specify a single string to be
search-replaced with "/.../" in the .mailmap file. E.g. for
linux.git's current .mailmap:
git archive --remote=git@gitlab.com:linux-kernel/linux.git \
HEAD -- .mailmap | grep -a repo-abbrev
# repo-abbrev: /pub/scm/linux/kernel/git/
Then when running e.g.:
git shortlog --merges --author=Linus -1 v5.10-rc7..v5.10 | grep Merge
We'd emit (the [...] is mine):
Merge tag [...]git://git.kernel.org/.../tip/tip
But will now emit:
Merge tag [...]git.kernel.org/pub/scm/linux/kernel/git/tip/tip
I think at this point this is just a historical artifact we can get
rid of. It was initially meant for Linus's own use when we integrated
the Perl script[2], but since then it seems he's stopped using it.
Digging through Linus's release announcements on the LKML[3] the last
release I can find that made use of this output is Linux 2.6.25-rc6
back in March 2008[4]. Later on Linus started using --no-merges[5],
and nowadays seems to prefer some custom not-quite-shortlog format of
merges from lieutenants[6].
You will still see it on linux.git if you run "git shortlog" manually
yourself with --merges, with this removed you can still get the same
output with:
git log --pretty=fuller v5.10-rc7..v5.10 |
sed 's!/pub/scm/linux/kernel/git/!/.../!g' |
git shortlog
Arguably we should do the same for the search-replacing of "[PATCH]"
at the beginning with "". That seems to be another relic of a bygone
era when linux.git patches would have their E-Mail subject lines
applied as-is by "git am" or whatever. But we documented that feature
in "git-shortlog(1)", and it seems more widely applicable than
something purely kernel-specific.
1. 7595e2ee6e (git-shortlog: make common repository prefix
configurable with .mailmap, 2006-11-25)
2. fa375c7f1b (Add git-shortlog perl script, 2005-06-04)
3. https://lore.kernel.org/lkml/
4. https://lore.kernel.org/lkml/alpine.LFD.1.00.0803161651350.3020@woody.linux-foundation.org/
5. https://lore.kernel.org/lkml/BANLkTinrbh7Xi27an3uY7pDWrNKhJRYmEA@mail.gmail.com/
6. https://lore.kernel.org/lkml/CAHk-=wg1+kf1AVzXA-RQX0zjM6t9J2Kay9xyuNqcFHWV-y5ZYw@mail.gmail.com/
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When executing a fetch, then git will currently allocate one reference
transaction per reference update and directly commit it. This means that
fetches are non-atomic: even if some of the reference updates fail,
others may still succeed and modify local references.
This is fine in many scenarios, but this strategy has its downsides.
- The view of remote references may be inconsistent and may show a
bastardized state of the remote repository.
- Batching together updates may improve performance in certain
scenarios. While the impact probably isn't as pronounced with loose
references, the upcoming reftable backend may benefit as it needs to
write less files in case the update is batched.
- The reference-update hook is currently being executed twice per
updated reference. While this doesn't matter when there is no such
hook, we have seen severe performance regressions when doing a
git-fetch(1) with reference-transaction hook when the remote
repository has hundreds of thousands of references.
Similar to `git push --atomic`, this commit thus introduces atomic
fetches. Instead of allocating one reference transaction per updated
reference, it causes us to only allocate a single transaction and commit
it as soon as all updates were received. If locking of any reference
fails, then we abort the complete transaction and don't update any
reference, which gives us an all-or-nothing fetch.
Note that this may not completely fix the first of above downsides, as
the consistent view also depends on the server-side. If the server
doesn't have a consistent view of its own references during the
reference negotiation phase, then the client would get the same
inconsistent view the server has. This is a separate problem though and,
if it actually exists, can be fixed at a later point.
This commit also changes the way we write FETCH_HEAD in case `--atomic`
is passed. Instead of writing changes as we go, we need to accumulate
all changes first and only commit them at the end when we know that all
reference updates succeeded. Ideally, we'd just do so via a temporary
file so that we don't need to carry all updates in-memory. This isn't
trivially doable though considering the `--append` mode, where we do not
truncate the file but simply append to it. And given that we support
concurrent processes appending to FETCH_HEAD at the same time without
any loss of data, seeding the temporary file with current contents of
FETCH_HEAD initially and then doing a rename wouldn't work either. So
this commit implements the simple strategy of buffering all changes and
appending them to the file on commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The handling of ref updates is completely handled by `s_update_ref()`,
which will manage the complete lifecycle of the reference transaction.
This is fine right now given that git-fetch(1) does not support atomic
fetches, so each reference gets its own transaction. It is quite
inflexible though, as `s_update_ref()` only knows about a single
reference update at a time, so it doesn't allow us to alter the
strategy.
This commit prepares `s_update_ref()` and its only caller
`update_local_ref()` to allow passing an external transaction. If none
is given, then the existing behaviour is triggered which creates a new
transaction and directly commits it. Otherwise, if the caller provides a
transaction, then we only queue the update but don't commit it. This
optionally allows the caller to manage when a transaction will be
committed.
Given that `update_local_ref()` is always called with a `NULL`
transaction for now, no change in behaviour is expected from this
change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The cleanup code in `s_update_ref()` is currently duplicated for both
succesful and erroneous exit paths. This commit refactors the function
to have a shared exit path for both cases to remove the duplication.
Suggested-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit refactors `append_fetch_head()` to use a `struct strbuf` for
formatting the update which we're about to append to the FETCH_HEAD
file. While the refactoring doesn't have much of a benefit right now, it
serves as a preparatory step to implement atomic fetches where we need
to buffer all updates to FETCH_HEAD and only flush them out if all
reference updates succeeded.
No change in behaviour is expected from this commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When performing a fetch with the default `--write-fetch-head` option, we
write all updated references to FETCH_HEAD while the updates are
performed. Given that updates are not performed atomically, it means
that we we write to FETCH_HEAD even if some or all of the reference
updates fail.
Given that we simply update FETCH_HEAD ad-hoc with each reference, the
logic is completely contained in `store_update_refs` and thus quite hard
to extend. This can already be seen by the way we skip writing to the
FETCH_HEAD: instead of having a conditional which simply skips writing,
we instead open "/dev/null" and needlessly write all updates there.
We are about to extend git-fetch(1) to accept an `--atomic` flag which
will make the fetch an all-or-nothing operation with regards to the
reference updates. This will also require us to make the updates to
FETCH_HEAD an all-or-nothing operation, but as explained doing so is not
easy with the current layout. This commit thus refactors the wa we write
to FETCH_HEAD and pulls out the logic to open, append to, commit and
close the file. While this may seem rather over-the top at first,
pulling out this logic will make it a lot easier to update the code in a
subsequent commit. It also allows us to easily skip writing completely
in case `--no-write-fetch-head` was passed.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git for-each-repo --config=X' should return success without calling any
subcommands when the config key 'X' has no value. The current
implementation instead segfaults.
A user could run into this issue if they used 'git maintenance start' to
initialize their cron schedule using 'git for-each-repo
--config=maintenance.repo ...' but then using 'git maintenance
unregister' to remove the config option. (Note: 'git maintenance stop'
would remove the config _and_ remove the cron schedule.)
Add a simple test to ensure this works. Use 'git help --no-such-option'
as the potential subcommand to ensure that we will hit a failure if the
subcommand is ever run.
Reported-by: Andreas Bühmann <dev@uuml.de>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the ref-filter sorting of detached HEAD to check the
FILTER_REFS_DETACHED_HEAD flag, instead of relying on the ref
description filled-in by get_head_description() to start with "(",
which in turn we expect to ASCII-sort before any other reference.
For context, we'd like the detached line to appear first at the start
of "git branch -l", e.g.:
$ git branch -l
* (HEAD detached at <hash>)
master
This doesn't change that, but improves on a fix made in
28438e84e0 (ref-filter: sort detached HEAD lines firstly, 2019-06-18)
and gives the Chinese translation the ability to use its preferred
punctuation marks again.
In Chinese the fullwidth versions of punctuation like "()" are
typically written as (U+FF08 fullwidth left parenthesis), (U+FF09
fullwidth right parenthesis) instead[1]. This form is used in both
po/zh_{CN,TW}.po in most cases where "()" is translated in a string.
Aside from that improvement to the Chinese translation, it also just
makes for cleaner code that we mark any special cases in the ref_array
we're sorting with flags and make the sort function aware of them,
instead of piggy-backing on the general-case of strcmp() doing the
right thing.
As seen in the amended tests this made reverse sorting a bit more
consistent. Before this we'd sometimes sort this message in the
middle, now it's consistently at the beginning or end, depending on
whether we're doing a normal or reverse sort. Having it at the end
doesn't make much sense either, but at least it behaves consistently
now. A follow-up commit will make this behavior under reverse sorting
even better.
I'm removing the "TRANSLATORS" comments that were in the old code
while I'm at it. Those were added in d4919bb288 (ref-filter: move
get_head_description() from branch.c, 2017-01-10). I think it's
obvious from context, string and translation memory in typical
translation tools that these are the same or similar string.
1. https://en.wikipedia.org/wiki/Chinese_punctuation#Marks_similar_to_European_punctuation
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the reverse/ignore_case/version sort flags in the ref_sorting
struct into a bitfield. Having three of them was already a bit
unwieldy, but it would be even more so if another flag needed a
function like ref_sorting_icase_all() introduced in
76f9e569ad (ref-filter: apply --ignore-case to all sorting keys,
2020-05-03).
A follow-up change will introduce such a flag, so let's move this over
to a bitfield. Instead of using the usual '#define' pattern I'm using
the "enum" pattern from builtin/rebase.c's b4c8eb024a (builtin
rebase: support --quiet, 2018-09-04).
Perhaps there's a more idiomatic way of doing the "for each in list
amend mask" pattern than this "mask/on" variable combo. This function
doesn't allow us to e.g. do any arbitrary changes to the bitfield for
multiple flags, but I think in this case that's fine. The common case
is that we're calling this with a list of one.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree repair" learned to deal with the case where both the
repository and the worktree moved.
* es/worktree-repair-both-moved:
worktree: teach `repair` to fix multi-directional breakage
When a user does not tell "git pull" to use rebase or merge, the
command gives a loud message telling a user to choose between
rebase or merge but creates a merge anyway, forcing users who would
want to rebase to redo the operation. Fix an early part of this
problem by tightening the condition to give the message---there is
no reason to stop or force the user to choose between rebase or
merge if the history fast-forwards.
* fc/pull-merge-rebase:
pull: display default warning only when non-ff
pull: correct condition to trigger non-ff advice
pull: get rid of unnecessary global variable
pull: give the advice for choosing rebase/merge much later
pull: refactor fast-forward check
Various improvements to the codepath that writes out pack bitmaps.
* tb/pack-bitmap: (24 commits)
pack-bitmap-write: better reuse bitmaps
pack-bitmap-write: relax unique revwalk condition
pack-bitmap-write: use existing bitmaps
pack-bitmap: factor out 'add_commit_to_bitmap()'
pack-bitmap: factor out 'bitmap_for_commit()'
pack-bitmap-write: ignore BITMAP_FLAG_REUSE
pack-bitmap-write: build fewer intermediate bitmaps
pack-bitmap.c: check reads more aggressively when loading
pack-bitmap-write: rename children to reverse_edges
t5310: add branch-based checks
commit: implement commit_list_contains()
bitmap: implement bitmap_is_subset()
pack-bitmap-write: fill bitmap with commit history
pack-bitmap-write: pass ownership of intermediate bitmaps
pack-bitmap-write: reimplement bitmap writing
ewah: add bitmap_dup() function
ewah: implement bitmap_or()
ewah: make bitmap growth less aggressive
ewah: factor out bitmap growth
rev-list: die when --test-bitmap detects a mismatch
...
There has never been a "git branch --local", this is just a typo for
"--list". Fixes a comment added in 23e714df91 (branch: roll
show_detached HEAD into regular ref_list, 2015-09-23).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the guidelines in parse-options.h,
we should not end in a full stop or start with
a capital letter. Fix old error and usage
messages to match this expectation.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that mktag has been migrated to use the fsck machinery to check
its input, it makes sense to teach it to run in the equivalent of "git
fsck"'s default mode.
For cases where mktag is used to (re)create a tag object using data
from an existing and malformed tag object, the validation may
optionally have to be loosened. Teach the command to take the
"--[no-]strict" option to do so.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A `struct lock_file` is pretty much just a wrapper around a tempfile.
But it's easy enough to avoid relying on this. Use the wrappers that the
lock file API provides rather than peeking at the temp file or even into
*its* internals.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the errors mktag might emit for translation. This is a plumbing
command, but the errors it emits are intended to be human-readable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the "mktag" command to use parse-options.h instead of its own
ad-hoc argc handling. This doesn't matter much in practice since it
doesn't support any options, but removes another special-case in our
codebase, and makes it easier to add options to it in the future.
It does marginally improve the situation for programs that want to
execute git commands in a consistent manner and e.g. always use
--end-of-options. E.g. "gitaly" does that, and has a blacklist of
built-ins that don't support --end-of-options. This is one less
special case for it and other similar programs to support.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In earlier commits mktag learned to use the fsck machinery, at which
point we needed to add fsck.extraHeaderEntry so it could be as strict
about extra headers as it's been ever since it was implemented.
But it's not nice to need to switch away from "mktag" to "hash-object"
+ manual "fsck" just because you'd like to have an extra header. So
let's support turning it off by getting "fsck.*" variables from the
config.
Pedantically speaking it's still not possible to make "mktag" behave
just like "hash-object -t tag" does, since we're unconditionally going
to check the referenced object in verify_object_in_tag(), which is our
own check, and not one that exists in fsck.c.
But the spirit of "this works like fsck" is preserved, in that if you
created such a tag with "hash-object" and did a full "fsck" on the
repository it would also error out about that invalid object, it just
wouldn't emit the same message as fsck does.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the fsck_config() function from builtin/fsck.c to fsck.[ch]. This
allows for re-using it in other tools that expose fsck logic and want
to support its configuration variables.
A logical continuation of this change would be to use a common
function for all of {fetch,receive}.fsck.* and fsck.*. See
5d477a334a (fsck (receive-pack): allow demoting errors to warnings,
2015-06-22) and my own 1362df0d41 (fetch: implement fetch.fsck.*,
2018-07-27) for the relevant code.
However, those routines want to not parse the fsck.skipList into OIDs,
but rather pass them along with the --strict option to another
process. It would be possible to refactor that whole thing so we
support e.g. a "fetch." prefix, then just keep track of the skiplist
as a filename instead of parsing it, and learn to spew that all out
from our internal structures into something we can append to the
--strict option.
But instead I'm planning to re-use this in "mktag", which'll just
re-use these "fsck.*" variables as-is.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the validation logic in "mktag" to use fsck's fsck_tag()
instead of its own custom parser. Curiously the logic for both dates
back to the same commit[1]. Let's unify them so we're not maintaining
two sets functions to verify that a tag is OK.
The behavior of fsck_tag() and the old "mktag" code being removed here
is different in few aspects.
I think it makes sense to remove some of those checks, namely:
A. fsck only cares that the timezone matches [-+][0-9]{4}. The mktag
code disallowed values larger than 1400.
Yes there's currently no timezone with a greater offset[2], but
since we allow any number of non-offical timezones (e.g. +1234)
passing this through seems fine. Git also won't break in the
future if e.g. French Polynesia decides it needs to outdo the Line
Islands when it comes to timezone extravagance.
B. fsck allows missing author names such as "tagger <email>", mktag
wouldn't, but would allow e.g. "tagger [2 spaces] <email>" (but
not "tagger [1 space] <email>"). Now we allow all of these.
C. Like B, but "mktag" disallowed spaces in the <email> part, fsck
allows it.
In some ways fsck_tag() is stricter than "mktag" was, namely:
D. fsck disallows zero-padded dates, but mktag didn't care. So
e.g. the timestamp "0000000000 +0000" produces an error now. A
test in "t1006-cat-file.sh" relied on this, it's been changed to
use "hash-object" (without fsck) instead.
There was one check I deemed worth keeping by porting it over to
fsck_tag():
E. "mktag" did not allow any custom headers, and by extension (as an
empty commit is allowed) also forbade an extra stray trailing
newline after the headers it knew about.
Add a new check in the "ignore" category to fsck and use it. This
somewhat abuses the facility added in efaba7cc77 (fsck:
optionally ignore specific fsck issues completely, 2015-06-22).
This is somewhat of hack, but probably the least invasive change
we can make here. The fsck command will shuffle these categories
around, e.g. under --strict the "info" becomes a "warn" and "warn"
becomes "error". Existing users of fsck's (and others,
e.g. index-pack) --strict option rely on this.
So we need to put something into a category that'll be ignored by
all existing users of the API. Pretending that
fsck.extraHeaderEntry=error ("ignore" by default) was set serves
to do this for us.
1. ec4465adb3 (Add "tag" objects that can be used to sign other
objects., 2005-04-25)
2. https://en.wikipedia.org/wiki/List_of_UTC_time_offsets
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces no functional change, but refactors the print-out of
the hash at the end to do the same thing with less code.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This minor stylistic churn is usually something we'd avoid, but if we
don't do this then the file after changes in subsequent commits will
only have this minor style inconsistency, so let's change this while
we're at it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the hardcoded hint of 2^12 to 0. The default strbuf hint is
perfectly fine here, and the only reason we were hardcoding it is
because it survived migration from a pre-strbuf fixed-sized buffer.
See fd17f5b5f7 (Replace all read_fd use with strbuf_read, and get rid
of it., 2007-09-10) for that migration.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's background maintenance uses cron by default, but this is not
available on Windows. Instead, integrate with Task Scheduler.
Tasks can be scheduled using the 'schtasks' command. There are several
command-line options that can allow for some advanced scheduling, but
unfortunately these seem to all require authenticating using a password.
Instead, use the "/xml" option to pass an XML file that contains the
configuration for the necessary schedule. These XML files are based on
some that I exported after constructing a schedule in the Task Scheduler
GUI. These options only run background maintenance when the user is
logged in, and more fields are populated with the current username and
SID at run-time by 'schtasks'.
Since the GIT_TEST_MAINT_SCHEDULER environment variable allows us to
specify 'schtasks' as the scheduler, we can test the Windows-specific
logic on other platforms. Thus, add a check that the XML file written
by Git is valid when xmllint exists on the system.
Since we use a temporary file for the XML files sent to 'schtasks', we
prefix the random characters with the frequency so it is easier to
examine the proper file during tests. Instead of an exact match on the
'args' file, we 'grep' for the arguments other than the filename.
There is a deficiency in the current design. Windows has two kinds of
applications: GUI applications that start by "winmain()" and console
applications that start by "main()". Console applications are attached
to a new Console window if they are not already associated with a GUI
application. This means that every hour the scheudled task launches a
command window for the scheduled tasks. Not only is this visually
obtrusive, but it also takes focus from whatever else the user is
doing!
A simple fix would be to insert a GUI application that acts as a shim
between the scheduled task and Git. This is currently possible in Git
for Windows by setting the <Command> tag equal to
C:\Program Files\Git\git-bash.exe
with options "--hide --no-needs-console --command=cmd\git.exe"
followed by the arguments currently used. Since git-bash.exe is not
included in Windows builds of core Git, I chose to leave out this
feature. My plan is to submit a small patch to Git for Windows that
converts the use of git.exe with this use of git-bash.exe in the
short term. In the long term, we can consider creating this GUI
shim application within core Git, perhaps in contrib/.
Co-authored-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing mechanism for scheduling background maintenance is done
through cron. The 'crontab -e' command allows updating the schedule
while cron itself runs those commands. While this is technically
supported by macOS, it has some significant deficiencies:
1. Every run of 'crontab -e' must request elevated privileges through
the user interface. When running 'git maintenance start' from the
Terminal app, it presents a dialog box saying "Terminal.app would
like to administer your computer. Administration can include
modifying passwords, networking, and system settings." This is more
alarming than what we are hoping to achieve. If this alert had some
information about how "git" is trying to run "crontab" then we would
have some reason to believe that this dialog might be fine. However,
it also doesn't help that some scenarios just leave Git waiting for
a response without presenting anything to the user. I experienced
this when executing the command from a Bash terminal view inside
Visual Studio Code.
2. While cron initializes a user environment enough for "git config
--global --show-origin" to show the correct config file information,
it does not set up the environment enough for Git Credential Manager
Core to load credentials during a 'prefetch' task. My prefetches
against private repositories required re-authenticating through UI
pop-ups in a way that should not be required.
The solution is to switch from cron to the Apple-recommended [1]
'launchd' tool.
[1] https://developer.apple.com/library/archive/documentation/MacOSX/Conceptual/BPSystemStartup/Chapters/ScheduledJobs.html
The basics of this tool is that we need to create XML-formatted
"plist" files inside "~/Library/LaunchAgents/" and then use the
'launchctl' tool to make launchd aware of them. The plist files
include all of the scheduling information, along with the command-line
arguments split across an array of <string> tags.
For example, here is my plist file for the weekly scheduled tasks:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0"><dict>
<key>Label</key><string>org.git-scm.git.weekly</string>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/git-core/git</string>
<string>--exec-path=/usr/local/libexec/git-core</string>
<string>for-each-repo</string>
<string>--config=maintenance.repo</string>
<string>maintenance</string>
<string>run</string>
<string>--schedule=weekly</string>
</array>
<key>StartCalendarInterval</key>
<array>
<dict>
<key>Day</key><integer>0</integer>
<key>Hour</key><integer>0</integer>
<key>Minute</key><integer>0</integer>
</dict>
</array>
</dict>
</plist>
The schedules for the daily and hourly tasks are more complicated
since we need to use an array for the StartCalendarInterval with
an entry for each of the six days other than the 0th day (to avoid
colliding with the weekly task), and each of the 23 hours other
than the 0th hour (to avoid colliding with the daily task).
The "Label" value is currently filled with "org.git-scm.git.X"
where X is the frequency. We need a different plist file for each
frequency.
The launchctl command needs to be aligned with a user id in order
to initialize the command environment. This must be done using
the 'launchctl bootstrap' subcommand. This subcommand is new as
of macOS 10.11, which was released in September 2015. Before that
release the 'launchctl load' subcommand was recommended. The best
source of information on this transition I have seen is available
at [2]. The current design does not preclude a future version that
detects the available fatures of 'launchctl' to use the older
commands. However, it is best to rely on the newest version since
Apple might completely remove the deprecated version on short
notice.
[2] https://babodee.wordpress.com/2016/04/09/launchctl-2-0-syntax/
To remove a schedule, we must run 'launchctl bootout' with a valid
plist file. We also need to 'bootout' a task before the 'bootstrap'
subcommand will succeed, if such a task already exists.
The need for a user id requires us to run 'id -u' which works on
POSIX systems but not Windows. Further, the need for fully-qualitifed
path names including $HOME behaves differently in the Git internals and
the external test suite. The $HOME variable starts with "C:\..." instead
of the "/c/..." that is provided by Git in these subcommands. The test
therefore has a prerequisite that we are not on Windows. The cross-
platform logic still allows us to test the macOS logic on a Linux
machine.
We can verify the commands that were run by 'git maintenance start'
and 'git maintenance stop' by injecting a script that writes the
command-line arguments into GIT_TEST_MAINT_SCHEDULER.
An earlier version of this patch accidentally had an opening
"<dict>" tag when it should have had a closing "</dict>" tag. This
was caught during manual testing with actual 'launchctl' commands,
but we do not want to update developers' tasks when running tests.
It appears that macOS includes the "xmllint" tool which can verify
the XML format. This is useful for any system that might contain
the tool, so use it whenever it is available.
We strive to make these tests work on all platforms, but Windows caused
some headaches. In particular, the value of getuid() called by the C
code is not guaranteed to be the same as `$(id -u)` invoked by a test.
This is because `git.exe` is a native Windows program, whereas the
utility programs run by the test script mostly utilize the MSYS2 runtime,
which emulates a POSIX-like environment. Since the purpose of the test
is to check that the input to the hook is well-formed, the actual user
ID is immaterial, thus we can work around the problem by making the the
test UID-agnostic. Another subtle issue is the $HOME environment
variable being a Windows-style path instead of a Unix-style path. We can
be more flexible here instead of expecting exact path matches.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Co-authored-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user specifies a base commit to switch to, check if it actually
references a commit right away to avoid getting confused later on when
it turns out to be an invalid object.
Reported-by: LeSeulArtichaut <leseulartichaut@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change all remnants of "sha1" in hash-lookup.c and .h and rename them to
reflect that we're not just able to handle SHA-1 these days.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename this function to reflect that we're not just able to handle SHA-1
these days. There are a few instances of "sha1" left in sha1-lookup.[ch]
after this, but those will be addressed in the next commit.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop the last remnant of "sha1" in this file and rename it to reflect
that we're not just able to handle SHA-1 these days.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hotfix for a topic of this cycle.
* ma/maintenance-crontab-fix:
t7900-maintenance: test for magic markers
gc: fix handling of crontab magic markers
git-maintenance.txt: add missing word
"git pack-redandant" when there is only one packfile used to crash,
which has been corrected.
* jx/pack-redundant-on-single-pack:
pack-redundant: fix crash when one packfile in repo
On `git maintenance start`, we add a few entries to the user's cron
table. We wrap our entries using two magic markers, "# BEGIN GIT
MAINTENANCE SCHEDULE" and "# END GIT MAINTENANCE SCHEDULE". At a later
`git maintenance stop`, we will go through the table and remove these
lines. Or rather, we will remove the "BEGIN" marker, the "END" marker
and everything between them.
Alas, we have a bug in how we detect the "END" marker: we don't. As we
loop through all the lines of the crontab, if we are in the "old
region", i.e., the region we're aiming to remove, we make an early
`continue` and don't get as far as checking for the "END" marker. Thus,
once we've seen our "BEGIN", we remove everything until the end of the
file.
Rewrite the logic for identifying these markers. There are four cases
that are mutually exclusive: The current line starts a region or it ends
it, or it's firmly within the region, or it's outside of it (and should
be printed).
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a segmentation fault.
The bug is caused by dereferencing `new_branch_info->commit` when it is
`NULL`, which is the case when the tree-ish argument is actually a tree,
not a commit-ish. This was introduced in 5602b500c3 (builtin/checkout:
fix `git checkout -p HEAD...` bug, 2020-10-07), where we tried to ensure
that the special tree-ish `HEAD...` is handled correctly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move logic that handles implying -p on -c/--cc from
log_setup_revisions_tweak() to diff_merges_setup_revs(), where it
belongs.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call it where given functionality is needed instead of direct
checking/tweaking of diff merges related fields.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function sets all the relevant flags to disabled state, so that
no code that checks only one of them get it wrong.
Then we call this new function everywhere where diff merges output
suppression is needed.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename diff_merges_default_to_enable() to
diff_merges_default_to_first_parent() to match its semantics.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The checks for first_parent_only don't in fact belong to this module,
as the primary purpose of this flag is history traversal limiting, so
get it out of this module and rename the
diff_merges_first_parent_defaults_to_enable()
to
diff_merges_default_to_enable()
to match new semantics.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the same "diff_merges" prefix for all the diff merges function
names.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create separate diff-merges.c and diff-merges.h files, and move all
the code related to handling of diff merges there.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use these implementations from show_setup_revisions_tweak() and
log_setup_revisions_tweak() in builtin/log.c.
This completes moving of management of diff merges parameters to a
single place, where we can finally observe them simultaneously.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git worktree repair` knows how to repair the two-way links between the
repository and a worktree as long as a link in one or the other
direction is sound. For instance, if a linked worktree is moved (without
using `git worktree move`), repair is possible because the worktree
still knows the location of the repository even though the repository no
longer knows where the worktree is. Similarly, if the repository is
moved, repair is possible since the repository still knows the locations
of the worktrees even though the worktrees no longer know where the
repository is.
However, if both the repository and the worktrees are moved, then links
are severed in both directions, and no repair is possible. This is the
case even when the new worktree locations are specified as arguments to
`git worktree repair`. The reason for this limitation is twofold. First,
when `repair` consults the worktree's gitfile (/path/to/worktree/.git)
to determine the corresponding <repo>/worktrees/<id>/gitdir file to fix,
<repo> is the old path to the repository, thus it is unable to fix the
`gitdir` file at its new location since it doesn't know where it is.
Second, when `repair` consults <repo>/worktrees/<id>/gitdir to find the
location of the worktree's gitfile (/path/to/worktree/.git), the path
recorded in `gitdir` is the old location of the worktree's gitfile, thus
it is unable to repair the gitfile since it doesn't know where it is.
Fix these shortcomings by teaching `repair` to attempt to infer the new
location of the <repo>/worktrees/<id>/gitdir file when the location
recorded in the worktree's gitfile has become stale but the file is
otherwise well-formed. The inference is intentionally simple-minded.
For each worktree path specified as an argument, `git worktree repair`
manually reads the ".git" gitfile at that location and, if it is
well-formed, extracts the <id>. It then searches for a corresponding
<id> in <repo>/worktrees/ and, if found, concludes that there is a
reasonable match and updates <repo>/worktrees/<id>/gitdir to point at
the specified worktree path. In order for <repo> to be known, `git
worktree repair` must be run in the main worktree or bare repository.
`git worktree repair` first attempts to repair each incoming
/path/to/worktree/.git gitfile to point at the repository, and then
attempts to repair outgoing <repo>/worktrees/<id>/gitdir files to point
at the worktrees. This sequence was chosen arbitrarily when originally
implemented since the order of fixes is immaterial as long as one side
of the two-way link between the repository and a worktree is sound.
However, for this new repair technique to work, the order must be
reversed. This is because the new inference mechanism, when it is
successful, allows the outgoing <repo>/worktrees/<id>/gitdir file to be
repaired, thus fixing one side of the two-way link. Once that side is
fixed, the other side can be fixed by the existing repair mechanism,
hence the order of repairs is now significant.
Two safeguards are employed to avoid hijacking a worktree from a
different repository if the user accidentally specifies a foreign
worktree as an argument. The first, as described above, is that it
requires an <id> match between the repository and the worktree. That
itself is not foolproof for preventing hijack, so the second safeguard
is that the inference will only kick in if the worktree's
/path/to/worktree/.git gitfile does not point at a repository.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our users are going to be trained to prepare for future change of
init.defaultBranch configuration variable.
* js/init-defaultbranch-advice:
init: provide useful advice about init.defaultBranch
get_default_branch_name(): prepare for showing some advice
branch -m: allow renaming a yet-unborn branch
init: document `init.defaultBranch` better
Command `git pack-redundant --all` will crash if there is only one
packfile in the repository. This is because, if there is only one
packfile in local_packs, `cmp_local_packs` will do nothing and will
leave `pl->unique_objects` as uninitialized.
Also add testcases for repository with no packfile and one packfile
in t5323.
Reported-by: Daniel C. Klauer <daniel.c.klauer@web.de>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to display the annoying warning on every pull... only
the ones that are not fast-forward.
The current warning tests still pass, but not because of the arguments
or the configuration, but because they are all fast-forward.
We need to test non-fast-forward situations now.
Suggestions-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the advise() call that teaches users how they can choose
between merge and rebase into a helper function. This revealed that
the caller's logic needs to be further clarified to allow future
actions (like "erroring out" instead of the current "go ahead and
merge anyway") that should happen whether the advice message is
squelched out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is easy enough to do, and gives a more descriptive name to the
variable that is scoped in a more focused way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove this unreachable code. It was found by SunCC, it's found by a
non-fatal warning emitted by SunCC. It's one of the things it's more
vehement about than GCC & Clang.
It complains about a lot of other similarly unreachable code, e.g. a
BUG(...) without a "return", and a "return 0" after a long if/else,
both of whom have "return" statements. Those are also genuine
redundancies to a compiler, but arguably make the code a bit easier to
read & less fragile to maintain.
These return/break cases are just unnecessary however, and as seen
here the surrounding code just did a plain "return" without a "break"
already.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The subcommand is unusably slow and the reason why nobody reports it
as a performance bug is suspected to be the absense of users. Let's
show a big message that asks the user to tell us that they still
care about the command when an attempt is made to run the command,
with an escape hatch to override it with a command line option.
In a few releases, we may turn it into an error and keep it for a
few more releases before finally removing it (during the whole time,
the plan to remove it would be interrupted by end user raising hand).
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eventually we want to be omit the advice when we can fast-forward
in which case there is no reason to require the user to choose
between rebase or merge.
In order to do so, we need to delay giving the advice up to the
point where we can check if we can fast-forward or not.
Additionally, config_get_rebase() was probably never its true home.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We would like to be able to make this check before the decision to
rebase is made in a future step. Besides, using a separate helper
makes the code easier to follow.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are about to introduce a message giving users running `git init` some
advice about `init.defaultBranch`. This will necessarily be done in
`repo_default_branch_name()`.
Not all code paths want to show that advice, though. In particular, the
`git clone` codepath _specifically_ asks for `init_db()` to be quiet,
via the `INIT_DB_QUIET` flag.
In preparation for showing users above-mentioned advice, let's change
the function signature of `get_default_branch_name()` to accept the
parameter `quiet`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In one of the next commits, we would like to give users some advice
regarding the initial branch name, and how to modify it.
To that end, it would be good if `git branch -m <name>` worked in a
freshly initialized repository without any commits. Let's make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git rev-parse has several options which print various paths. Some of
these paths are printed relative to the current working directory, and
some are absolute.
Normally, this is not a problem, but there are times when one wants
paths entirely in one format or another. This can be done trivially if
the paths are canonical, but canonicalizing paths is not possible on
some shell scripting environments which lack realpath(1) and also in Go,
which lacks functions that properly canonicalize paths on Windows.
To help out the scripter, let's provide an option which turns most of
the paths printed by git rev-parse to be either relative to the current
working directory or absolute and canonical. Document which options are
affected and which are not so that users are not confused.
This approach is cleaner and tidier than providing duplicates of
existing options which are either relative or absolute.
Note that if the user needs both forms, it is possible to pass an
additional option in the middle of the command line which changes the
behavior of subsequent operations.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git maintenance run/start/stop" needed to be run in a repository
to hold the lockfile they use, but didn't make sure they are
actually in a repository, which has been corrected.
* rs/maintenance-run-outside-repo:
t7900: fix typo: "test_execpt_success"
maintenance: fix SEGFAULT when no repository
Code clean-up.
* ma/grep-init-default:
MyFirstObjectWalk: drop `init_walken_defaults()`
grep: copy struct in one fell swoop
grep: use designated initializers for `grep_defaults`
grep: don't set up a "default" repo for grep
The transport layer was taught to optionally exchange the session
ID assigned by the trace2 subsystem during fetch/push transactions.
* js/trace2-session-id:
receive-pack: log received client session ID
send-pack: advertise session ID in capabilities
upload-pack, serve: log received client session ID
fetch-pack: advertise session ID in capabilities
transport: log received server session ID
serve: advertise session ID in v2 capabilities
receive-pack: advertise session ID in v0 capabilities
upload-pack: advertise session ID in v0 capabilities
trace2: add a public function for getting the SID
docs: new transfer.advertiseSID option
docs: new capability to advertise session IDs
"git maintenance" command had trouble working in a directory whose
pathname contained an ERE metacharacter like '+'.
* ds/maintenance-part-3:
maintenance: use 'git config --fixed-value'
Various subcommands of "git config" that takes value_regex
learn the "--literal-value" option to take the value_regex option
as a literal string.
* ds/config-literal-value:
config doc: value-pattern is not necessarily a regexp
config: implement --fixed-value with --get*
config: plumb --fixed-value into config API
config: add --fixed-value option, un-implemented
t1300: add test for --replace-all with value-pattern
t1300: test "set all" mode with value-pattern
config: replace 'value_regex' with 'value_pattern'
config: convert multi_replace to flags
"git update-ref --stdin" learns to take multiple transactions in a
single session.
* ps/update-ref-multi-transaction:
update-ref: disallow "start" for ongoing transactions
p1400: use `git-update-ref --stdin` to test multiple transactions
update-ref: allow creation of multiple transactions
t1400: avoid touching refs on filesystem
The on-disk bitmap format has a flag to mark a bitmap to be "reused".
This is a rather curious feature, and works like this:
- a run of pack-objects would decide to mark the last 80% of the
bitmaps it generates with the reuse flag
- the next time we generate bitmaps, we'd see those reuse flags from
the last run, and mark those commits as special:
- we'd be more likely to select those commits to get bitmaps in
the new output
- when generating the bitmap for a selected commit, we'd reuse the
old bitmap as-is (rearranging the bits to match the new pack, of
course)
However, neither of these behaviors particularly makes sense.
Just because a commit happened to be bitmapped last time does not make
it a good candidate for having a bitmap this time. In particular, we may
choose bitmaps based on how recent they are in history, or whether a ref
tip points to them, and those things will change. We're better off
re-considering fresh which commits are good candidates.
Reusing the existing bitmap _is_ a reasonable thing to do to save
computation. But only reusing exact bitmaps is a weak form of this. If
we have an old bitmap for A and now want a new bitmap for its child, we
should be able to compute that only by looking at trees and that are new
to the child. But this code would consider only exact reuse (which is
perhaps why it was eager to select those commits in the first place).
Furthermore, the recent switch to the reverse-edge algorithm for
generating bitmaps dropped this optimization entirely (and yet still
performs better).
So let's do a few cleanups:
- drop the whole "reusing bitmaps" phase of generating bitmaps. It's
not helping anything, and is mostly unused code (or worse, code that
is using CPU but not doing anything useful)
- drop the use of the on-disk reuse flag to select commits to bitmap
- stop setting the on-disk reuse flag in bitmaps we generate (since
nothing respects it anymore)
We will keep a few innards of the reuse code, which will help us
implement a more capable version of the "reuse" optimization:
- simplify rebuild_existing_bitmaps() into a function that only builds
the mapping of bits between the old and new orders, but doesn't
actually convert any bitmaps
- make rebuild_bitmap() public; we'll call it lazily to convert bitmaps
as we traverse (using the mapping created above)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If 'git clone' couldn't execute 'transport_fetch_refs()' (e.g., because
of an error on the remote's side in 'git upload-pack'), then it will
silently ignore it.
Even though this has been the case at least since clone was ported to C
(way back in 8434c2f1af (Build in clone, 2008-04-27)), 'git fetch'
doesn't ignore these and reports any failures it sees.
That suggests that ignoring the return value in 'git clone' is simply an
oversight that should be corrected. That's exactly what this patch does.
(Noticing and fixing this is no coincidence, we'll want it in the next
patch in order to demonstrate a regression in 'git upload-pack' via a
'git clone'.)
There's no additional logging here, but that matches how 'git fetch'
handles the same case. An assumption there is that whichever part of
transport_fetch_refs() fails will complain loudly, so any additional
logging here is redundant.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the logic to deal with a repack operation that ended up
creating the same packfile.
* tb/repack-simplify:
builtin/repack.c: don't move existing packs out of the way
builtin/repack.c: keep track of what pack-objects wrote
repack: make "exts" array available outside cmd_repack()
"git pull --rebase --recurse-submodules" checked for local changes
in a wrong range and failed to run correctly when it should.
* pb/pull-rebase-recurse-submodules:
pull: check for local submodule modifications with the right range
t5572: describe '--rebase' tests a little more
t5572: add notes on a peculiar test
pull --rebase: compute rebase arguments in separate function
sparse-checkouts are built on the patterns in the
$GIT_DIR/info/sparse-checkout file, where commands have modified
behavior for paths that do not match those patterns. The differences in
behavior, as far as the bugs concerned here, fall into three different
categories (with git subcommands that fall into each category listed):
* commands that only look at files matching the patterns:
* status
* diff
* clean
* update-index
* commands that remove files from the working tree that do not match
the patterns, and restore files that do match them:
* read-tree
* switch
* checkout
* reset (--hard)
* commands that omit writing files to the working tree that do not
match the patterns, unless those files are not clean:
* merge
* rebase
* cherry-pick
* revert
There are some caveats above, e.g. a plain `git diff` ignores files
outside the sparsity patterns but will show diffs for paths outside the
sparsity patterns when revision arguments are passed. (Technically,
diff is treating the sparse paths as matching HEAD.) So, there is some
internal inconsistency among these commands. There are also additional
commands that should behave differently in the face of sparse-checkouts,
as the sparse-checkout documentation alludes to, but the above is
sufficient for me to explain how `git stash` is affected.
What is relevant here is that logically 'stash' should behave like a
merge; it three-way merges the changes the user had in progress at stash
creation time, the HEAD at the time the stash was created, and the
current HEAD, in order to get the stashed changes applied to the current
branch. However, this simplistic view doesn't quite work in practice,
because stash tweaks it a bit due to two factors: (1) flags like
--keep-index and --include-untracked (why we used two different verbs,
'keep' and 'include', is a rant for another day) modify what should be
staged at the end and include more things that should be quasi-merged,
(2) stash generally wants changes to NOT be staged. It only provides
exceptions when (a) some of the changes had conflicts and thus we want
to use stages to denote the clean merges and higher order stages to
mark the conflicts, or (b) if there is a brand new file we don't want
it to become untracked.
stash has traditionally gotten this special behavior by first doing a
merge, and then when it's clean, applying a pipeline of commands to
modify the result. This series of commands for
unstaging-non-newly-added-files came from the following commands:
git diff-index --cached --name-only --diff-filter=A $CTREE >"$a"
git read-tree --reset $CTREE
git update-index --add --stdin <"$a"
rm -f "$a"
Looking back at the different types of special sparsity handling listed
at the beginning of this message, you may note that we have at least one
of each type covered here: merge, diff-index, and read-tree. The weird
mix-and-match led to 3 different bugs:
(1) If a path merged cleanly and it didn't match the sparsity patterns,
the merge backend would know to avoid writing it to the working tree and
keep the SKIP_WORKTREE bit, simply only updating it in the index.
Unfortunately, the subsequent commands would essentially undo the
changes in the index and thus simply toss the changes altogether since
there was nothing left in the working tree. This means the stash is
only partially applied.
(2) If a path existed in the worktree before `git stash apply` despite
having the SKIP_WORKTREE bit set, then the `git read-tree --reset` would
print an error message of the form
error: Entry 'modified' not uptodate. Cannot merge.
and cause stash to abort early.
(3) If there was a brand new file added by the stash, then the
diff-index command would save that pathname to the temporary file, the
read-tree --reset would remove it from the index, and the update-index
command would barf due to no such file being present in the working
copy; it would print a message of the form:
error: NEWFILE: does not exist and --remove not passed
fatal: Unable to process path NEWFILE
and then cause stash to abort early.
Basically, the whole idea of unstage-unless-brand-new requires special
care when you are dealing with a sparse-checkout. Fix these problems
by applying the following simple rule:
When we unstage files, if they have the SKIP_WORKTREE bit set,
clear that bit and write the file out to the working directory.
(*) If there's already a file present in the way, rename it first.
This fixes all three problems in t7012.13 and allows us to mark it as
passing.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When stash was converted from shell to a builtin, it merely
transliterated the forking of various git commands from shell to a C
program that would fork the same commands. Some of those were converted
over to actual library calls, but much of the pipeline-of-commands
design still remains. Fix some of this by replacing the portion
corresponding to
git diff-index --cached --name-only --diff-filter=A $CTREE >"$a"
git read-tree --reset $CTREE
git update-index --add --stdin <"$a"
rm -f "$a"
into a library function that does the same thing. (The read-tree
--reset was already partially converted over to a library call, but as
an independent piece.) Note here that this came after a merge operation
was performed. The merge machinery always stages anything that cleanly
merges, and the above code only runs if there are no conflicts. Its
purpose is to make it so that when there are no conflicts, all the
changes from the stash are unstaged. However, that causes brand new
files from the stash to become untracked, so the code above first saves
those files off and then re-adds them afterwards.
We replace the whole series of commands with a simple function that will
unstage files that are not newly added. This doesn't fix any bugs in
the usage of these commands, it simply matches the existing behavior but
makes it into a single atomic operation that we can then operate on as a
whole. A subsequent commit will take advantage of this to fix issues
with these commands in sparse-checkouts.
This conversion incidentally fixes t3906.1, because the separate
update-index process would die with the following error messages:
error: uninitialized_sub: is a directory - add files inside instead
fatal: Unable to process path uninitialized_sub
The unstaging of the directory as a submodule meant it was no longer
tracked, and thus as an uninitialized directory it could not be added
back using `git update-index --add`, thus resulting in this error and
early abort. Most of the submodule tests in 3906 continue to fail after
this change, this change was just enough to push the first of those
tests to success.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To generate its filename, the 'git bugreport' builtin asks the system
for the current time with 'localtime()'. Since this uses a shared
buffer, it is not thread-safe.
Even though 'git bugreport' is not multi-threaded, using localtime() can
trigger some static analysis tools to complain, and a quick
$ git grep -oh 'localtime\(_.\)\?' -- **/*.c | sort | uniq -c
shows that the only usage of the thread-unsafe 'localtime' is in a piece
of documentation.
So, convert this instance to use the thread-safe version for
consistency, and to appease some analysis tools.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Multiple "credential-store" backends can race to lock the same
file, causing everybody else but one to fail---reattempt locking
with some timeout to reduce the rate of the failure.
* sa/credential-store-timeout:
crendential-store: use timeout when locking file
Fix formulation of an error message with two placeholders in "git
worktree add" subcommand.
* mt/worktree-error-message-fix:
worktree: fix order of arguments in error message
Fix an option name in "gc" documentation.
* ab/gc-keep-base-option:
gc: rename keep_base_pack variable for --keep-largest-pack
gc docs: change --keep-base-pack to --keep-largest-pack
The "git maintenance run" and "git maintenance start/stop" commands
holds a file-based lock at the .git/maintenance.lock and
.git/schedule.lock respectively. These locks are used to ensure only
one maintenance process is executed at the time as both operations
involves writing data into the git repository.
The path to the lock file is built using
"the_repository->objects->odb->path" that results in SEGFAULT when we
have no repository available as "the_repository->objects->odb" is
set to NULL.
Let's teach maintenance command to use RUN_SETUP option that will
provide the validation and fail when running outside of a repository.
Hence fixing the SEGFAULT for all three operations and making the
behaviour consistent across all subcommands.
Setting the RUN_SETUP also provides the same protection for all
subcommands given that the "register" and "unregister" also requires to
be executed inside a repository.
Furthermore let's remove the local validation implemented by the
"register" and "unregister" as this will not be required anymore with
the new option.
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code was not prepared to deal with pack .idx file that is
larger than 4GB.
* jk/4gb-idx:
packfile: detect overflow in .idx file size checks
block-sha1: take a size_t length parameter
fsck: correctly compute checksums on idx files larger than 4GB
use size_t to store pack .idx byte offsets
compute pack .idx byte offsets using size_t
The exchange between receive-pack and proc-receive hook did not
carefully check for errors.
* jx/t5411-flake-fix:
receive-pack: use default version 0 for proc-receive
receive-pack: gently write messages to proc-receive
t5411: new helper filter_out_user_friendly_and_stable_output
When a repository's leading directories contain regex metacharacters,
the config calls for 'git maintenance register' and 'git maintenance
unregister' are not careful enough. Use the new --fixed-value option
to direct the config machinery to use exact string matches. This is a
more robust option than escaping these arguments in a piecemeal fashion.
For the test, require that we are not running on Windows since the '+'
and '*' characters are not allowed on that filesystem.
Reported-by: Emily Shaffer <emilyshaffer@google.com>
Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config builtin does its own regex matching of values for the --get,
--get-all, and --get-regexp modes. Plumb the existing 'flags' parameter
to the get_value() method so we can initialize the value-pattern argument
as a fixed string instead of a regex pattern.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git_config_set_multivar_in_file_gently() and related methods now
take a 'flags' bitfield, so add a new bit representing the --fixed-value
option from 'git config'. This alters the purpose of the value_pattern
parameter to be an exact string match. This requires some initialization
changes in git_config_set_multivar_in_file_gently() and a new strcmp()
call in the matches() method.
The new CONFIG_FLAGS_FIXED_VALUE flag is initialized in builtin/config.c
based on the --fixed-value option, and that needs to be updated in
several callers.
This patch only affects some of the modes of 'git config', and the rest
will be completed in the next change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git config' builtin takes a 'value-pattern' parameter for several
actions. This can cause confusion when expecting exact value matches
instead of regex matches, especially when the input string contains
metacharacters. While callers can escape the patterns themselves, it
would be more friendly to allow an argument to disable the pattern
matching in favor of an exact string match.
Add a new '--fixed-value' option that does not currently change the
behavior. The implementation will be filled in by later changes for
each appropriate action. For now, check and test that --fixed-value
will abort the command when included with an incompatible action or
without a 'value-pattern' argument.
The name '--fixed-value' was chosen over something simpler like
'--fixed' because some commands allow regular expressions on the
key in addition to the value.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'value_regex' argument in the 'git config' builtin is poorly named,
especially related to an upcoming change that allows exact string
matches instead of ERE pattern matches.
Perform a mostly mechanical change of every instance of 'value_regex' to
'value_pattern' in the codebase. This is only critical for documentation
and error messages, but it is best to be consistent inside the codebase,
too.
For documentation, use 'value-pattern' which is better punctuation. This
affects Documentation/git-config.txt and the usage in builtin/config.c,
which was already mixed between 'value_regex' and 'value-regex'.
I gave some thought to leaving the value_regex variables inside config.c
that are regex_t pointers. However, it is probably best to keep the name
consistent with the rest of the variables.
This does not update the translations inside the po/ directory, as that
creates conflicts with ongoing work. The input strings should
automatically update through automation, and a few of the output strings
currently use "[value_regex]" directly.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will extend the flexibility of the config API. Before doing so, let's
take an existing 'int multi_replace' parameter and replace it with a new
'unsigned flags' parameter that can take multiple options as a bit field.
Update all callers that specified multi_replace to now specify the
CONFIG_FLAGS_MULTI_REPLACE flag. To add more clarity, extend the
documentation of git_config_set_multivar_in_file() including a clear
labeling of its arguments. Other config API methods in config.h require
only a change of the final parameter from 'int' to 'unsigned'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When holding the lock for rewriting the credential file, use a timeout
to avoid race conditions when the credentials file needs to be updated
in parallel.
An example would be doing `fetch --all` on a repository with several
remotes that need credentials, using parallel fetching.
The timeout can be configured using "credentialStore.lockTimeoutMS",
defaulting to 1 second.
Signed-off-by: Simão Afonso <simao.afonso@powertools-tech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing schedule mechanism using 'cron' is supported by POSIX
platforms, but not Windows. It also works slightly differently on
macOS to significant detriment of the user experience. To allow for
new implementations on these platforms, extract a method that
performs the platform-specific scheduling mechanism. This will be
swapped at compile time with new implementations on specialized
platforms.
As we add this generality, rename GIT_TEST_CRONTAB to
GIT_TEST_MAINT_SCHEDULER. Further, this variable is now parsed as
"<scheduler>:<command>" so we can test platform-specific scheduling
logic even when not on the correct platform. By specifying the
<scheduler> in this string, we will be able to test all three sets of
Git logic from a Linux machine.
Co-authored-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Restore a space that was lost in 8a0fc8d19d (stash: convert apply to
builtin, 2019-02-25).
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A specialization of hashmap that uses a string as key has been
introduced. Hopefully it will see wider use over time.
* en/strmap:
shortlog: use strset from strmap.h
Use new HASHMAP_INIT macro to simplify hashmap initialization
strmap: take advantage of FLEXPTR_ALLOC_STR when relevant
strmap: enable allocations to come from a mem_pool
strmap: add a strset sub-type
strmap: split create_entry() out of strmap_put()
strmap: add functions facilitating use as a string->int map
strmap: enable faster clearing and reusing of strmaps
strmap: add more utility functions
strmap: new utility functions
hashmap: provide deallocation function names
hashmap: introduce a new hashmap_partial_clear()
hashmap: allow re-use after hashmap_free()
hashmap: adjust spacing to fix argument alignment
hashmap: add usage documentation explaining hashmap_free[_entries]()
"git rev-parse" learned the "--end-of-options" to help scripts to
safely take a parameter that is supposed to be a revision, e.g.
"git rev-parse --verify -q --end-of-options $rev".
* jk/rev-parse-end-of-options:
rev-parse: handle --end-of-options
rev-parse: put all options under the "-" check
rev-parse: don't accept options after dashdash
The maximum length of output filenames "git format-patch" creates
has become configurable (used to be capped at 64).
* jc/format-patch-name-max:
format-patch: make output filename configurable
In 15fabd1bbd ("builtin/grep.c: make configuration callback more
reusable", 2012-10-09), we learned to fill a `static struct grep_opt
grep_defaults` which we can use as a blueprint for other such structs.
At the time, we didn't consider designated initializers to be widely
useable, but these days, we do. (See, e.g., cbc0f81d96 ("strbuf: use
designated initializers in STRBUF_INIT", 2017-07-10).)
Use designated initializers to let the compiler set up the struct and so
that we don't need to remember to call `init_grep_defaults()`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`init_grep_defaults()` fills a `static struct grep_opt grep_defaults`.
This struct is then used by `grep_init()` as a blueprint for other such
structs. Notably, `grep_init()` takes a `struct repo *` and assigns it
into the target struct.
As a result, it is unnecessary for us to take a `struct repo *` in
`init_grep_defaults()` as well. We assign it into the default struct and
never look at it again. And in light of how we return early if we have
already set up the default struct, it's not just unnecessary, but is
also a bit confusing: If we are called twice and with different repos,
is it a bug or a feature that we ignore the second repo?
Drop the repo parameter for `init_grep_defaults()`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git worktree add` (without --force) errors out when given a path
that is already registered as a worktree and the path is missing on
disk. But the `cmd` and `path` strings are switched on the error
message. Let's fix that.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in an earlier change the keep_base_pack variable name is a
relic from an earlier on-list version of ae4e89e549 ("gc: add
--keep-largest-pack option", 2018-04-15) before it was renamed to
--keep-largest-pack.
Let's change the variable name to avoid that confusion, it's easier to
read the code if there's a 1=1 mapping between the variable name and
option name.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In d18c950a69 (pull: warn if the user didn't say whether to rebase or
to merge, 2020-03-09), a new hint was introduced to encourage users to
make a conscious decision about whether they want their pull to merge or
to rebase by configuring the `pull.rebase` setting.
This warning was clearly intended to advise users, but as pointed out in
https://lore.kernel.org/git/87ima2rdsm.fsf%40evledraar.gmail.com, it
uses `warning()` instead of `advise()`.
One consequence is that the advice is not colorized in the same manner
as other, similar messages. So let's use `advise()` instead.
Pointed-out-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
compare_tasks_by_selection() is used with QSORT and gets passed pointers
to the elements of "static struct maintenance_task tasks[]". It casts
the *addresses* of these passed pointers to element pointers, though,
and thus effectively compares some unrelated values from the stack. Fix
the casts to actually compare array elements.
Detected by USan (make SANITIZE=undefined test).
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git blame -L :funcname -- path" did not work well for a path for
which a userdiff driver is defined.
* pb/blame-funcname-range-userdiff:
blame: simplify 'setup_blame_bloom_data' interface
blame: simplify 'setup_scoreboard' interface
blame: enable funcname blaming with userdiff driver
line-log: mention both modes in 'blame' and 'log' short help
doc: add more pointers to gitattributes(5) for userdiff
blame-options.txt: also mention 'funcname' in '-L' description
doc: line-range: improve formatting
doc: log, gitk: move '-L' description to 'line-range-options.txt'
Preparation for a new merge strategy.
* en/merge-ort-api-null-impl:
merge,rebase,revert: select ort or recursive by config or environment
fast-rebase: demonstrate merge-ort's API via new test-tool command
merge-ort-wrappers: new convience wrappers to mimic the old merge API
merge-ort: barebones API of new merge strategy with empty implementation
Parts of "git maintenance" to ease writing crontab entries (and
other scheduling system configuration) for it.
* ds/maintenance-part-3:
maintenance: add troubleshooting guide to docs
maintenance: use 'incremental' strategy by default
maintenance: create maintenance.strategy config
maintenance: add start/stop subcommands
maintenance: add [un]register subcommands
for-each-repo: run subcommands on configured repos
maintenance: add --schedule option and config
maintenance: optionally skip --auto process
"git rebase -i" did not store ORIG_HEAD correctly.
* pw/rebase-i-orig-head:
rebase -i: simplify get_revision_ranges()
rebase -i: use struct object_id when writing state
rebase -i: use struct object_id rather than looking up commit
rebase -i: stop overwriting ORIG_HEAD buffer
"git format-patch --output=there" did not work as expected and
instead crashed. The option is now supported.
* jk/format-patch-output:
format-patch: support --output option
format-patch: tie file-opening logic to output_directory
format-patch: refactor output selection
"git log -L<range>:<path>" is documented to take no pathspec, but
this was not enforced by the command line option parser, which has
been corrected.
* jc/line-log-takes-no-pathspec:
log: diagnose -L used with pathspec as an error
The code to see if "git stash drop" can safely remove refs/stash
has been made more carerful.
* rs/empty-reflog-check-fix:
stash: simplify reflog emptiness check
When 'git repack' creates a pack with the same name as any existing
pack, it moves the existing one to 'old-pack-xxx.{pack,idx,...}' and
then renames the new one into place.
Eventually, it would be nice to have 'git repack' allow for writing a
multi-pack index at the critical time (after the new packs have been
written / moved into place, but before the old ones have been deleted).
Guessing that this option might be called '--write-midx', this makes the
following situation (where repacks are issued back-to-back without any
new objects) impossible:
$ git repack -adb
$ git repack -adb --write-midx
In the second repack, the existing packs are overwritten verbatim with
the same rename-to-old sequence. At that point, the current MIDX is
invalidated, since it refers to now-missing packs. So that code wants to
be run after the MIDX is re-written. But (prior to this patch) the new
MIDX can't be written until the new packs are moved into place. So, we
have a circular dependency.
This is all hypothetical, since no code currently exists to write a MIDX
safely during a 'git repack' (the 'GIT_TEST_MULTI_PACK_INDEX' does so
unsafely). Putting hypothetical aside, though: why do we need to rename
existing packs to be prefixed with 'old-' anyway?
This behavior dates all the way back to 2ad47d6 (git-repack: Be
careful when updating the same pack as an existing one., 2006-06-25).
2ad47d6 is mainly concerned about a case where a newly written pack
would have a different structure than its index. This used to be
possible when the pack name was a hash of the set of objects. Under this
naming scheme, two packs that store the same set of objects could differ
in delta selection, object positioning, or both. If this happened, then
any such packs would be unreadable in the instant between copying the
new pack and new index (i.e., either the index or pack will be stale
depending on the order that they were copied).
But since 1190a1a (pack-objects: name pack files after trailer hash,
2013-12-05), this is no longer possible, since pack files are named not
after their logical contents (i.e., the set of objects), but by the
actual checksum of their contents. So, this old- behavior can safely go,
which allows us to avoid our circular dependency above.
In addition to avoiding the circular dependency, this patch also makes
'git repack' a lot simpler, since we don't have to deal with failures
encountered when renaming existing packs to be prefixed with 'old-'.
This patch is mostly limited to removing code paths that deal with the
'old' prefixing, with the exception of files that include the pack's
name in their own filename, like .idx, .bitmap, and related files. The
exception is that we want to continue to trust what pack-objects wrote.
That is, it is not the case that we pretend as if pack-objects didn't
write files identical to ones that already exist, but rather that we
respect what pack-objects wrote as the source of truth. That cuts two
ways:
- If pack-objects produced an identical pack to one that already
exists with a bitmap, but did not produce a bitmap, we remove the
bitmap that already exists. (This behavior is codified in t7700.14).
- If pack-objects produced an identical pack to one that already
exists, we trust the just-written version of the coresponding .idx,
.promisor, and other files over the ones that already exist. This
ensures that we use the most up-to-date versions of this files,
which is safe even in the face of format changes in, say, the .idx
file (which would not be reflected in the .idx file's name).
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since 'git pull' learned '--recurse-submodules' in a6d7eb2c7a
(pull: optionally rebase submodules (remote submodule changes only),
2017-06-23), we check if there are local submodule modifications by
checking the revision range 'curr_head --not rebase_fork_point'.
The goal of this check is to abort the pull if there are submodule
modifications in the local commits being rebased, since this scenario is
not supported.
However, the actual range of commits being rebased is not
'rebase_fork_point..curr_head', as the logic in
'get_rebase_newbase_and_upstream' reveals, it is 'upstream..curr_head'.
If the 'git merge-base --fork-point' invocation in
'get_rebase_fork_point' fails to find a fork point between the current
branch and the remote-tracking branch we are pulling from,
'rebase_fork_point' is null and since 4d36f88be7 (submodule: do not pass
null OID to setup_revisions, 2018-05-24), 'submodule_touches_in_range'
checks 'curr_head' and all its ancestors for submodule modifications.
Since it is highly likely that there are submodule modifications in this
range (which is in effect the whole history of the current branch), this
prevents 'git pull --rebase --recurse-submodules' from succeeding if no
fork point exists between the current branch and the remote-tracking
branch being pulled. This can happen, for example, when the current
branch was forked from a commit which was never recorded in the reflog
of the remote-tracking branch we are pulling, as the last two paragraphs
of the "Discussion on fork-point mode" section in git-merge-base(1)
explain.
Fix this bug by passing 'upstream' instead of 'rebase_fork_point' as the
'excl_oid' argument to 'submodule_touches_in_range'.
Reported-by: Brice Goglin <bgoglin@free.fr>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function 'run_rebase' is responsible for constructing the
command line to be passed to 'git rebase'. This includes both forwarding
pass-through options given to 'git pull' as well computing the <newbase>
and <upstream> arguments to 'git rebase'.
A following commit will need to access the <upstream> argument in
'cmd_pull' to fix a bug with 'git pull --rebase --recurse-submodules'.
In order to do so, refactor the code so that the <newbase> and
<upstream> commits are computed in a new, separate function,
'get_rebase_newbase_and_upstream'.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the subsequent commit, it will become useful to keep track of which
metadata files were written by pack-objects. We already do this to an
extent with the 'exts' array, which only is used in the context of
existing packs.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We'll use it in a helper function soon.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is currently possible to write multiple "start" commands into
git-update-ref(1) for a single session, but none of them except for the
first one actually have any effect.
Using such nested "start"s may eventually have a sensible effect. One
may imagine that it restarts the current transaction, effectively
emptying it and creating a new one. It may also allow for creation of
nested transactions. But currently, none of these are implemented.
Silently ignoring this misuse is making it hard to iterate in the future
if "start" is ever going to have meaningful semantics in such a context.
This commit thus makes sure to error out in case we see such use.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While git-update-ref has recently grown commands which allow interactive
control of transactions in e48cf33b61 (update-ref: implement interactive
transaction handling, 2020-04-02), it is not yet possible to create
multiple transactions in a single session. To do so, one currently still
needs to invoke the executable multiple times.
This commit addresses this shortcoming by allowing the "start" command
to create a new transaction if the current transaction has already been
either committed or aborted.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We sometimes store the offset into a pack .idx file as an "unsigned
long", but the mmap'd size of a pack .idx file can exceed 4GB. This is
sufficient on LP64 systems like Linux, but will be too small on LLP64
systems like Windows, where "unsigned long" is still only 32 bits. Let's
use size_t, which is a better type for an offset into a memory buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A pack and its matching .idx file are limited to 2^32 objects, because
the pack format contains a 32-bit field to store the number of objects.
Hence we use uint32_t in the code.
But the byte count of even a .idx file can be much larger than that,
because it stores at least a hash and an offset for each object. So
using SHA-1, a v2 .idx file will cross the 4GB boundary at 153,391,650
objects. This confuses load_idx(), which computes the minimum size like
this:
unsigned long min_size = 8 + 4*256 + nr*(hashsz + 4 + 4) + hashsz + hashsz;
Even though min_size will be big enough on most 64-bit platforms, the
actual arithmetic is done as a uint32_t, resulting in a truncation. We
actually exceed that min_size, but then we do:
unsigned long max_size = min_size;
if (nr)
max_size += (nr - 1)*8;
to account for the variable-sized table. That computation doesn't
overflow quite so low, but with the truncation for min_size, we end up
with a max_size that is much smaller than our actual size. So we
complain that the idx is invalid, and can't find any of its objects.
We can fix this case by casting "nr" to a size_t, which will do the
multiplication in 64-bits (assuming you're on a 64-bit platform; this
will never work on a 32-bit system since we couldn't map the whole .idx
anyway). Likewise, we don't have to worry about further additions,
because adding a smaller number to a size_t will convert the other side
to a size_t.
A few notes:
- obviously we could just declare "nr" as a size_t in the first place
(and likewise, packed_git.num_objects). But it's conceptually a
uint32_t because of the on-disk format, and we correctly treat it
that way in other contexts that don't need to compute byte offsets
(e.g., iterating over the set of objects should and generally does
use a uint32_t). Switching to size_t would make all of those other
cases look wrong.
- it could be argued that the proper type is off_t to represent the
file offset. But in practice the .idx file must fit within memory,
because we mmap the whole thing. And the rest of the code (including
the idx_size variable we're comparing against) uses size_t.
- we'll add the same cast to the max_size arithmetic line. Even though
we're adding to a larger type, which will convert our result, the
multiplication is still done as a 32-bit value and can itself
overflow. I didn't check this with my test case, since it would need
an even larger pack (~530M objects), but looking at compiler output
shows that it works this way. The standard should agree, but I
couldn't find anything explicit in 6.3.1.8 ("usual arithmetic
conversions").
The case in load_idx() was the most immediate one that I was able to
trigger. After fixing it, looking up actual objects (including the very
last one in sha1 order) works in a test repo with 153,725,110 objects.
That's because bsearch_hash() works with uint32_t entry indices, and the
actual byte access:
int cmp = hashcmp(table + mi * stride, sha1);
is done with "stride" as a size_t, causing the uint32_t "mi" to be
promoted to a size_t. This is the way most code will access the index
data.
However, I audited all of the other byte-wise accesses of
packed_git.index_data, and many of the others are suspect (they are
similar to the max_size one, where we are adding to a properly sized
offset or directly to a pointer, but the multiplication in the
sub-expression can overflow). I didn't trigger any of these in practice,
but I believe they're potential problems, and certainly adding in the
cast is not going to hurt anything here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When receive-pack receives a session-id capability from the client, log
the received session ID via a trace2 data event.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When transfer.advertiseSID is true, advertise receive-pack's session ID
via the new session-id capability.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that hashamp has lazy initialization and a HASHMAP_INIT macro,
hashmaps allocated on the stack can be initialized without a call to
hashmap_init() and in some cases makes the code a bit shorter. Convert
some callsites over to take advantage of this.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the verison negotiation phase between "receive-pack" and
"proc-receive", "proc-receive" can send an empty flush-pkt to end the
negotiation and use default version 0. Capabilities (such as
"push-options") are not supported in version 0.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes found a flaky hang in `t5411/test-0013-bad-protocol.sh` in the
osx-clang job of the CI/PR builds, and ran into an issue when using
the `--stress` option with the following error messages:
fatal: unable to write flush packet: Broken pipe
send-pack: unexpected disconnect while reading sideband packet
fatal: the remote end hung up unexpectedly
In this test case, the "proc-receive" hook sends an error message and
dies earlier. While "receive-pack" on the other side of the pipe
should forward the error message of the "proc-receive" hook to the
client side, but it fails to do so. This is because "receive-pack"
uses `packet_write_fmt()` and `packet_flush()` to write pkt-line
message to "proc-receive" hook, and these functions die immediately
when pipe is broken. Using "gently" forms for these functions will get
more predicable output.
Add more "--die-*" options to test helper to test different stages of
the protocol between "receive-pack" and "proc-receive" hook.
Reported-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We taught rev-list a new way to separate options from revisions in
19e8789b23 (revision: allow --end-of-options to end option parsing,
2019-08-06), but rev-parse uses its own parser. It should know about
--end-of-options not only for consistency, but because it may be
presented with similarly ambiguous cases. E.g., if a caller does:
git rev-parse "$rev" -- "$path"
to parse an untrusted input, then it will get confused if $rev contains
an option-like string like "--local-env-vars". Or even "--not-real",
which we'd keep as an option to pass along to rev-list.
Or even more importantly:
git rev-parse --verify "$rev"
can be confused by options, even though its purpose is safely parsing
untrusted input. On the plus side, it will always fail the --verify
part, as it will not have parsed a revision, so the caller will
generally "fail closed" rather than continue to use the untrusted
string. But it will still trigger whatever option was in "$rev"; this
should be mostly harmless, since rev-parse options are all read-only,
but I didn't carefully audit all paths.
This patch lets callers write:
git rev-parse --end-of-options "$rev" -- "$path"
and:
git rev-parse --verify --end-of-options "$rev"
which will both treat "$rev" always as a revision parameter. The latter
is a bit clunky. It would be nicer if we had defined "--verify" to
require that its next argument be the revision. But we have not
historically done so, and:
git rev-parse --verify -q "$rev"
does currently work. I added a test here to confirm that we didn't break
that.
A few implementation notes:
- We don't document --end-of-options explicitly in commands, but rather
in gitcli(7). So I didn't give it its own section in git-rev-parse(1).
But I did call it out specifically in the --verify section, and
include it in the examples, which should show best practices.
- We don't have to re-indent the main option-parsing block, because we
can combine our "did we see end of options" check with "does it start
with a dash". The exception is the pre-setup options, which need
their own block.
- We do however have to pull the "--" parsing out of the "does it start
with dash" block, because we want to parse it even if we've seen
--end-of-options.
- We'll leave "--end-of-options" in the output. This is probably not
technically necessary, as a careful caller will do:
git rev-parse --end-of-options $revs -- $paths
and anything in $revs will be resolved to an object id. However, it
does help a slightly less careful caller like:
git rev-parse --end-of-options $revs_or_paths
where a path "--foo" will remain in the output as long as it also
exists on disk. In that case, it's helpful to retain --end-of-options
to get passed along to rev-list, s it would otherwise see just
"--foo".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option-parsing loop of rev-parse checks whether the first character
of an arg is "-". If so, then it enters a series of conditionals
checking for individual options. But some options are inexplicably
outside of that outer conditional.
This doesn't produce the wrong behavior; the conditional is actually
redundant with the individual option checks, and it's really only its
fallback "continue" that we care about. But we should at least be
consistent.
One obvious alternative is that we could get rid of the conditional
entirely. But we'll be using the extra block it provides in the next
patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because of the order in which we check options in rev-parse, there are a
few options we accept even after a "--". This is wrong, because the
whole point of "--" is to say "everything after here is a path". Let's
move the "did we see a dashdash" check (it's called "as_is" in the code)
to the top of the parsing loop.
Note there is one subtlety here. The options are ordered so that some
are checked before we even see if we're in a repository (they continue
the loop, and if we get past a certain point, then we do the repository
setup). By moving the as_is check higher, it's also in that "before
setup" section, even though it might look at the repository via
verify_filename(). However, this works out: we'd never set as_is until
we parse "--", and we don't parse that until after doing the setup.
An alternative here to avoid the subtlety is to put the as_is check at
the top of the post-setup options. But then every pre-setup option would
have to remember to check "if (!as_is && !strcmp(...))". So while this
is a bit magical, it's harder for future code to get wrong.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the past 15 years, we've used the hardcoded 64 as the length
limit of the filename of the output from the "git format-patch"
command. Since the value is shorter than the 80-column terminal, it
could grow without line wrapping a bit. At the same time, since the
value is longer than half of the 80-column terminal, we could fit
two or more of them in "ls" output on such a terminal if we allowed
to lower it.
Introduce a new command line option --filename-max-length=<n> and a
new configuration variable format.filenameMaxLength to override the
hardcoded default.
While we are at it, remove a check that the name of output directory
does not exceed PATH_MAX---this check is pointless in that by the
time control reaches the function, the caller would already have
done an equivalent of "mkdir -p", so if the system does not like an
overly long directory name, the control wouldn't have reached here,
and otherwise, we know that the system allowed the output directory
to exist. In the worst case, we will get an error when we try to
open the output file and handle the error correctly anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exit codes from "git remote add" etc. were not usable by scripted
callers.
* ab/git-remote-exit-code:
remote: add meaningful exit code on missing/existing
"git checkout-index" did not consistently signal an error with its
exit status.
* jk/checkout-index-errors:
checkout-index: propagate errors to exit code
checkout-index: drop error message from empty --stage=all
Now that all the external users of head_hash have been converted to
use a opts->orig_head instead we can stop returning head_hash from
get_revision_ranges().
Because we want to pass the full object names back to the caller in
`revisions` the find_unique_abbrev_r() call that was used to initialize
`head_hash` is replaced with oid_to_hex().
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than passing a string around pass the struct object_id that the
string was created from call oid_hex() when we write the file.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have a struct object_id containing the oid that we want to
set ORIG_HEAD to so use that rather than converting it to a string and
then calling get_oid() on that string.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After rebasing, ORIG_HEAD is supposed to point to the old HEAD of the
rebased branch. The code used find_unique_abbrev() to obtain the
object name of the old HEAD and wrote to both
.git/rebase-merge/orig-head (used by `rebase --abort` to go back to
the previous state) and to ORIG_HEAD. The buffer find_unique_abbrev()
gives back is volatile, unfortunately, and was overwritten after the
former file is written but before ORIG_FILE is written, leaving an
incorrect object name in it.
Avoid relying on the volatile buffer of find_unique_abbrev(), and
instead supply our own buffer to keep the object name.
I think that all of the users of head_hash should actually be using
opts->orig_head instead as passing a string rather than a struct
object_id around is a hang over from the scripted implementation. This
patch just fixes the immediate bug and adds a regression test based on
Caspar's reproduction example[1]. The users will be converted to use
struct object_id and head_hash removed in the next few commits.
[1] https://lore.kernel.org/git/CAFzd1+7PDg2PZgKw7U0kdepdYuoML9wSN4kofmB_-8NHrbbrHg@mail.gmail.com
Reported-by: Caspar Duregger <herr.kaste@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We've never intended to support diff's --output option in format-patch.
And until baa4adc66a (parse-options: disable option abbreviation with
PARSE_OPT_KEEP_UNKNOWN, 2019-01-27), it was impossible to trigger. We
first parse the format-patch options before handing the remainder off to
setup_revisions(). Before that commit, we'd accept "--output=foo" as an
abbreviation for "--output-directory=foo". But afterwards, we don't
check abbreviations, and --output gets passed to the diff code.
This results in nonsense behavior and bugs. The diff code will have
opened a filehandle at rev.diffopt.file, but we'll overwrite that with
our own handles that we open for each individual patch file. So the
--output file will always just be empty. But worse, the diff code also
sets rev.diffopt.close_file, so log_tree_commit() will close the
filehandle itself. And then the main loop in cmd_format_patch() will try
to close it again, resulting in a double-free.
The simplest solution would be to just disallow --output with
format-patch, as nobody ever intended it to work. However, we have
accidentally documented it (because format-patch includes diff-options).
And it does work with "git log", which writes the whole output to the
specified file. It's easy enough to make that work for format-patch,
too: it's really the same as --stdout, but pointed at a specific file.
We can detect the use of the --output option by the "close_file" flag
(note that we can't use rev.diffopt.file, since the diff setup will
otherwise set it to stdout). So we just need to unset that flag, but
don't have to do anything else. Our situation is otherwise exactly like
--stdout (note that we don't fclose() the file, but nor does the stdout
case; exiting the program takes care of that for us).
Reported-by: Johannes Postler <johannes.postler@txture.io>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In format-patch we're either outputting to stdout or to individual files
in an output directory (which may be just "./"). Our logic for whether
to open a new file for each patch is checked with "!use_stdout", but it
is equally correct to check for a non-NULL output_directory.
The distinction will matter when we add a new single-stream output in a
future patch, when only one of the three methods will want individual
files. Let's swap the logic here in preparation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --stdout and --output-directory options are mutually exclusive, but
it's hard to tell from reading the code. We have three separate
conditionals that check for use_stdout, and it's only after we've set up
the output_directory fully that we check whether the user also specified
--stdout.
Instead, let's check the exclusion explicitly first, then have a single
conditional that handles stdout versus an output directory. This is
slightly easier to follow now, and also will keep things sane when we
add another output mode in a future patch.
We'll add a few tests as well, covering the mutual exclusion and the
fact that we are not confused by a configured output directory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -L option is documented to accept no pathspec, but the
command line option parser has allowed the combination without
checking so far. Ensure that there is no pathspec when the -L
option is in effect to fix this.
Incidentally, this change fixes another bug in the command line
option parser, which has allowed the -L option used together
with the --follow option. Because the latter requires exactly
one path given, but the former takes no pathspec, they become
mutually incompatible automatically. Because the -L option
follows renames on its own, there is no reason to give --follow
at the same time.
The new tests say they may fail with "-L and --follow being
incompatible" instead of "-L and pathspec being incompatible".
Currently the expected failure can come only from the latter, but
this is to futureproof them, in case we decide to add code to
explicititly die on -L and --follow used together.
Heled-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow the testsuite to run where it treats requests for "recursive" or
the default merge algorithm via consulting the environment variable
GIT_TEST_MERGE_ALGORITHM which is expected to either be "recursive" (the
old traditional algorithm) or "ort" (the new algorithm).
Also, allow folks to pick the new algorithm via config setting. It
turns out builtin/merge.c already had a way to allow users to specify a
different default merge algorithm: pull.twohead. Rather odd
configuration name (especially to be in the 'pull' namespace rather than
'merge') but it's there. Add that same configuration to rebase,
cherry-pick, and revert.
This required updating the various callsites that called merge_trees()
or merge_recursive() to conditionally call the new API, so this serves
as another demonstration of what the new API looks and feels like.
There are almost certainly some callsites that have not yet been
modified to work with the new merge algorithm, but this represents the
ones that I have been testing with thus far.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff" family of commands learned the "-I<regex>" option to
ignore hunks whose changed lines all match the given pattern.
* mk/diff-ignore-regex:
diff: add -I<regex> that ignores matching changes
merge-base, xdiff: zero out xpparam_t structures
"git credential' didn't honor the core.askPass configuration
variable (among other things), which has been corrected.
* tk/credential-config:
credential: load default config
Document that the meaning of a Signed-off-by trailer can vary from
project to project in the end-user documentation, and clarify what
it means to this project.
* bk/sob-dco:
Documentation: stylistically normalize references to Signed-off-by:
SubmittingPatches: clarify DCO is our --signoff rule
Documentation: clarify and expand description of --signoff
doc: preparatory clean-up of description on the sign-off option
Test-coverage enhancement of running commit-graph task "git
maintenance" as needed led to discovery and fix of a bug.
* ds/maintenance-commit-graph-auto-fix:
maintenance: core.commitGraph=false prevents writes
maintenance: test commit-graph auto condition
"git fast-import" wasted a lot of memory when many marks were in use.
* jk/fast-import-marks-alloc-fix:
fast-import: fix over-allocation of marks storage
hashmap_free(), hashmap_free_entries(), and hashmap_free_() have existed
for a while, but aren't necessarily the clearest names, especially with
hashmap_partial_clear() being added to the mix and lazy-initialization
now being supported. Peff suggested we adopt the following names[1]:
- hashmap_clear() - remove all entries and de-allocate any
hashmap-specific data, but be ready for reuse
- hashmap_clear_and_free() - ditto, but free the entries themselves
- hashmap_partial_clear() - remove all entries but don't deallocate
table
- hashmap_partial_clear_and_free() - ditto, but free the entries
This patch provides the new names and converts all existing callers over
to the new naming scheme.
[1] https://lore.kernel.org/git/20201030125059.GA3277724@coredump.intra.peff.net/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The penultimate commit moved the initialization of 'sb.path' in
'builtin/blame.c::cmd_blame' before the call to
'blame.c::setup_blame_bloom_data'. Since 'cmd_blame' is the only caller
of 'setup_blame_bloom_data', it is now unnecessary for
'setup_blame_bloom_data' to receive 'path' as a separate argument, as
'sb.path' is already initialized.
Remove this argument from setup_blame_bloom_data's interface and use the
'path' field of the 'sb' 'struct blame_scoreboard' instead.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit moved the initialization of 'sb.path' in
'builtin/blame.c::cmd_blame' before the call to
'blame.c::setup_scoreboard'. Since 'cmd_blame' is the only caller of
'setup_scoreboard', it is now unnecessary for 'setup_scoreboard' to
receive 'path' as a separate argument, as 'sb.path' is already
initialized.
Remove this argument from setup_scoreboard's interface and use the
'path' field of the 'sb' 'struct blame_scoreboard' instead.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In blame.c::cmd_blame, we send the 'path' field of the 'sb' 'struct
blame_scoreboard' as the 'path' argument to
'line-range.c::parse_range_arg', but 'sb.path' is not set yet; it's set
to the local variable 'path' a few lines later at line 1137.
This 'path' argument is only used in 'parse_range_arg' if we are blaming
a funcname, i.e. `git blame -L :<funcname> <path>`, and in that case it
is sent to 'parse_range_funcname', where it is used to determine if a
userdiff driver should be used for said <path> to match the given
funcname.
Since 'path' is yet unset, the userdiff driver is never used, so we fall
back to the default funcname regex, which is usually not appropriate for
paths that are set to use a specific userdiff driver, and thus either we
match some unrelated lines, or we die with
fatal: -L parameter '<funcname>' starting at line 1: no match
This has been the case ever since `git blame` learned to blame a
funcname in 13b8f68c1f (log -L: :pattern:file syntax to find by
funcname, 2013-03-28).
Enable funcname blaming for paths using specific userdiff drivers by
initializing 'sb.path' earlier in 'cmd_blame', when some of its other
fields are initialized, so that it is set when passed to
'parse_range_arg'.
Add a regression test in 'annotate-tests.sh', which is sourced in
t8001-annotate.sh and t8002-blame.sh, leveraging an existing file used
to test the userdiff patterns in t4018-diff-funcname.
Also, use 'sb.path' instead of 'path' when constructing the error
message at line 1114, for consistency.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git blame -h' and 'git log -h' both show '-L <n,m>' and describe this
option as "Process only line range n,m, counting from 1". No hint is
given that a function name regex can also be used.
Use <range> instead, and expand the description of the option to mention
both modes. Remove "counting from 1" as it's uneeded; it's uncommon to
refer to the first line of a file as "line 0".
Also, for 'git log', improve the wording to better reflect the long help.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Calling rev-parse to check if the drop subcommand removed the last stash
and treating its failure as confirmation is fragile, as the command can
fail for other reasons, e.g. because the system is out of memory.
Directly check if the reflog is empty instead, which is more robust.
Reported-by: Marek Mrva <mrva@eof-studios.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
