zlib_compression_level is the compression level used for git's object store.
It's 1 by default, which is the fastest setting. This variable is also used
as the default compression level for ZIP archives created by git archive.
For archives, however, zlib's own default of 6 is more appropriate, as it's
favouring small size over speed -- archive creation is not that performance
critical most of the time.
This patch makes git archive independent from git's internal compression
level setting. It affects invocations of git archive without explicitly
specified compression level option, only.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch explains more carefully that `.gitignore` concerns only
untracked files and refers the reader to
git update-index --assume-unchanged
in the need of ignoring uncommitted changes in already tracked files.
The description of this option is lifted to a more "porcelainish"
level and explains the caveats of this usecase.
Whether feasible or not, I believe adding this functionality to
the porcelain is out of the scope of this patch. (And I personally
think that referring to the plumbing in the case of such a special
usage is fine.)
This is currently probably one of the top FAQs at #git and the
--assume-unchanged switch is not widely known; gitignore(5) is the first
place where people are likely to look for it.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch rewrites the general description yet again, first clarifying
the high-level concept, mentioning the difference to remotes and using
the subtree merge strategy, then getting to the details about tree
entries and .gitmodules file.
The patch also makes few smallar grammar fixups within the rest of the
description and clarifies how does 'init' relate to 'update --init'.
Cc: Heikki Orsila <shdl@zakalwe.fi>
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds only the minimum necessary to keep git pull/merge's diffstat from
wrapping. Notably absent is support for the K (erase) operation, and support
for POSIX write.
Signed-off-by: Peter Harris <git@peter.is-a-geek.org>
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function has to do three small and independent tasks, but all of them
were crammed into a single loop. This rewrites the function entirely by
unrolling these tasks.
We also now use is_dir_sep(c) instead of c == '/' to increase portability.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this simple fix "git gui" in the git source directory
finds the git-gui directory instead of the tcl script in /usr/bin.
Signed-off-by: Eric Raible <raible@gmail.com>
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check that all branches are displayed.
Signed-off-by: Fabian Emmes <fabian.emmes@rwth-aachen.de>
Signed-off-by: Lars Noschinski <lars@public.noschinski.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement cvs checkout's -c option by returning a list of all "modules".
This is more useful than displaying a perl warning if -c is given.
Signed-off-by: Lars Noschinski <lars@public.noschinski.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
req_update still parses /refs/heads manually. Replace this by
a call to show-ref.
Signed-off-by: Lars Noschinski <lars@public.noschinski.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The CVS_SERVER environment variable can cause some of the cvsimport tests
to fail. So unset this variable at the beginning of the test script.
Signed-off-by: Fabian Emmes <fabian.emmes@rwth-aachen.de>
Signed-off-by: Lars Noschinski <lars@public.noschinski.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 5b8e6f85 introduced stubs for three functions that make no sense
for git-shell. But those stubs defined libgit.a functions a second time
so that a linker can complain.
Now git-shell is only linked to a subset of libgit.a.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Scriptlets used form inside this test began with hardcoded "#!/bin/sh".
By setting SHELL_PATH the user is already telling us that what the vendor
has in /bin/sh isn't POSIX enough, and we really should try to honor that
request.
Originally noticed by SungHyun Nam who later tested this patch and
verified that it fixes the issue on Solaris 9.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When hold_locked_index() is called with a relative git_dir and you are
outside the work tree, the lock file become relative to the current
directory. So when later setup_work_tree() change the current directory
it breaks lock file path and commit_locked_index() fails.
This patch move index locking code after setup_work_tree() call to make
lock file relative to the working tree as it should be and add a test
case.
Noticed by Nick Andrew.
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/maint-index-pack:
index-pack: Honor core.deltaBaseCacheLimit when resolving deltas
index-pack: Track the object_entry that creates each base_data
index-pack: Chain the struct base_data on the stack for traversal
index-pack: Refactor base arguments of resolve_delta into a struct
Nick Andrew noticed that rev-list lets --quiet option to be parsed by
underlying diff_options parser but did not pick up the result. This
resulted in --quiet option to become effectively a no-op.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original code relied on an insane definition of skip_prefix() that
returned an empty string for a NULL input and returned the original if the
given "prefix" is not a prefix at all (it would have been justifiable if
it were called "come_up_with_a_short_name_to_report_ref()" or something,
though). In any case, when we replaced it with a more saner definition of
the function whose behaviour is true to its name, its callers needed to be
adjusted but the conversion missed one call site.
This introduces a helper function "abbrev_ref()" whose purpose is to get a
full refname and its possible prefix and to strip the prefix part if it
matches, or refname itself in full if it doesn't. This makes the callers
easier to read again.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace "run_command_v_opt_dir" by "run_command_v_opt_cd".
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note that v1.4.4.5 supports pack index v2, and describe how to keep
your repositories backwards-compatible, shall you need to.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the message rerere issues after reusing previous conflict
resolution from "Resolved" to "Staged" when autoupdate option is in
effect.
It is envisioned that in practice, some auto resolitions are trickier and
iffier than others, and we would want to add a feature to mark individual
resolutions as "this is ok to autoupdate" or "do not autoupdate the result
using this resolution even when rerere.autoupdate is in effect" in the
future. When that happens, these messages will make the distinction
clearer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A patch title "[PATCH] 1" was sanitized by the original code by stripping
the "[PATCH]" from the front, but after the conversion to use strbuf this
behaviour was broken due to a counting error.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a context menu item to invoke blame -C -C -C on a chunk
of the file. The results are used to update the 'original
location' column of the blame display.
The chunk is computed as the smallest line range that covers
both the 'last change' and 'original location' ranges of the
line that was clicked to open the menu.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Currently 'git-gui blame' does not kill its back-end
process, hoping that it will die anyway when the pipe
is closed. However, in some cases the process works
for a long time without producing any output. This
behavior results in a runaway CPU hog.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
On huge repositories, -C -C can be way too slow to be
unconditionally enabled, and it can also be useful to control
its precision.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Apply the work-around for checking the executable
permission of hook files not only on Cygwin, but on
Windows in general.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The message length depends on the length of the branch name. In my case,
the branch name "origin/add-chickens2" put the first line of the "your
branch has diverged" message over 80 characters, which triggered "less -FS"
to not exit automatically as expected.
This patch rewords the messages to make the lines generally shorter, so
that you'd need a significantly longer branch name to trigger the problem.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mv/dashless:
make remove-dashes: apply to scripts and programs as well, not just to builtins
git-bisect: use dash-less form on git bisect log
t1007-hash-object.sh: use quotes for the test description
t0001-init.sh: change confusing directory name
* ls/mailinfo:
git-mailinfo: use strbuf's instead of fixed buffers
Add some useful functions for strbuf manipulation.
Make some strbuf_*() struct strbuf arguments const.
Conflicts:
builtin-mailinfo.c
Figuring out how submodules work conceptually is quite a bumpy
ride for a newcomer; the user manual helps (if one knows to actually
look into it), but the reference documentation should provide good
quick intro as well. This patch attempts to do that, with suggestions
from Heikki Orsila.
Cc: Heikki Orsila <shdl@zakalwe.fi>
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/dashless:
Make usage strings dash-less
t/: Use "test_must_fail git" instead of "! git"
t/test-lib.sh: exit with small negagive int is ok with test_must_fail
Conflicts:
builtin-blame.c
builtin-mailinfo.c
builtin-mailsplit.c
builtin-shortlog.c
git-am.sh
t/t4150-am.sh
t/t4200-rerere.sh
* sp/maint-index-pack:
index-pack: Honor core.deltaBaseCacheLimit when resolving deltas
index-pack: Track the object_entry that creates each base_data
index-pack: Chain the struct base_data on the stack for traversal
index-pack: Refactor base arguments of resolve_delta into a struct
* maint:
Start preparing 1.5.6.4 release notes
git fetch-pack: do not complain about "no common commits" in an empty repo
rebase-i: keep old parents when preserving merges
t7600-merge: Use test_expect_failure to test option parsing
Fix buffer overflow in prepare_attr_stack
Fix buffer overflow in git diff
Fix buffer overflow in git-grep
git-cvsserver: fix call to nonexistant cleanupWorkDir()
Documentation/git-cherry-pick.txt et al.: Fix misleading -n description
Conflicts:
RelNotes
If the repo is empty, it is obvious that there are no common commits
when fetching from _anywhere_.
So there is no use in saying it in that case, and it can even be
annoying. Therefore suppress the message unilaterally if the repository
is empty prior to the fetch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/maint-bash-completion-optim:
bash completion: Resolve git show ref:path<tab> losing ref: portion
bash completion: Append space after file names have been completed
bash completion: Don't offer "a.." as a completion for "a."
bash completion: Improve responsiveness of git-log completion
When "rebase -i -p" tries to preserve merges of unrelated branches, it
lost some parents:
- When you have more than two parents, the commit in the new history
ends up with fewer than expected number of parents and this breakage
goes unnoticed;
- When you are rebasing a merge with two parents and one is lost, the
command tries to cherry-pick the original merge commit, and the command
fails.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It used plain 'if git merge ...', which hides a segfault. The test does not pass.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If PATH_MAX on your system is smaller than a path stored in the git repo,
it may cause the buffer overflow in prepare_attr_stack.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If PATH_MAX on your system is smaller than a path stored, it may cause
buffer overflow and stack corruption in diff_addremove() and diff_change()
functions when running git-diff
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
