These tests intentionally break the &&-chain after using 'unset' since
they don't know if 'unset' will succeed or fail and don't want a local
'unset' failure to fail the test overall. We can do better by using
sane_unset(), which can be linked into the &&-chain as usual.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of our tests try to make sure Git behaves sensibly in a
read-only directory, by dropping 'w' permission bit before doing a
test and then restoring it after it is done. The latter is needed
for the test framework to clean after itself without leaving a
leftover directory that cannot be removed.
Ancient parts of tests however arrange the above with
chmod a-w . &&
... do the test ...
status=$?
chmod 775 .
(exit $status)
which obviously would not work if the test somehow dies before it
has the chance to do "chmod 775". Rewrite them by following a more
robust pattern recently written tests use, which is
test_when_finished "chmod 775 ." &&
chmod a-w . &&
... do the test ...
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "2>&1" notation in Powershell and in Unix shells implies that stderr
is redirected to the same handle into which stdout is already written.
Let's use this special value to allow the same trick with
GIT_REDIRECT_STDERR and GIT_REDIRECT_STDOUT: if the former's value is
`2>&1`, then stderr will simply be written to the same handle as stdout.
The functionality was suggested by Jeff Hostetler.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Particularly when calling Git from applications, such as Visual Studio's
Team Explorer, it is important that stdin/stdout/stderr are closed
properly. However, when spawning processes on Windows, those handles
must be marked as inheritable if we want to use them, but that flag is a
global flag and may very well be used by other spawned processes which
then do not know to close those handles.
Let's introduce a set of environment variables (GIT_REDIRECT_STDIN and
friends) that specify paths to files, or even better, named pipes (which
are similar to Unix sockets) and that are used by the spawned Git
process. This helps work around above-mentioned issue: those named
pipes will be opened in a non-inheritable way upon startup, and no
handles are passed around (and therefore no inherited handles need to be
closed by any spawned child).
This feature shipped with Git for Windows (marked as experimental) since
v2.11.0(2), so it has seen some serious testing in the meantime.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sub-test "init in long base path" in t0001 checks the ability to
handle long base paths with restrictive permissions (--x). On OpenBSD
getcwd(3) fails in that case even for short paths. Check the two
aspects separately by trying to use a long base path both with and
without execute-only permissions. Only attempt the former if we know
that getcwd(3) doesn't care.
Original-patch-by: David Coppa <dcoppa@openbsd.org>
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
FreeBSD implements getcwd(3) as a syscall, but falls back to a version
based on readdir(3) if it fails for some reason. The latter requires
permissions to read and execute path components, while the former does
not. That means that if our buffer is too small and we're missing
rights we could get EACCES, but we may succeed with a bigger buffer.
Keep retrying if getcwd(3) indicates lack of permissions until our
buffer can fit PATH_MAX bytes, as that's the maximum supported by the
syscall on FreeBSD anyway. This way we do what we can to be able to
benefit from the syscall, but we also won't loop forever if there is a
real permission issue.
This fixes a regression introduced with 7333ed17 (setup: convert
setup_git_directory_gently_1 et al. to strbuf, 2014-07-28) for paths
longer than 127 bytes with components that miss read or execute
permissions (e.g. 0711 on /home for privacy reasons); we used a fixed
PATH_MAX-sized buffer before.
Reported-by: Zenobiusz Kunegunda <zenobiusz.kunegunda@interia.pl>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test tweaks for those who have default ACL in their git source tree
that interfere with the umask test.
* mm/reset-facl-before-umask-test:
t0001: don't let a default ACL interfere with the umask test
The "init creates a new deep directory (umask vs. shared)" test expects
the permissions of newly created files to be based on the umask, which
fails if a default ACL is inherited from the working tree for git. So
attempt to remove a default ACL if there is one. Same idea as
8ed0a740dd. (I guess I'm the only one who
ever runs the test suite with a default ACL set.)
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function needs_work_tree_config() that is called from
create_default_files() is supposed to be fed the path to ".git" that
looks as if it is at the top of the working tree, and decide if that
location matches the actual worktree being used. This comparison allows
"git init" to decide if core.worktree needs to be recorded in the
working tree.
In the current code, however, we feed the return value from
get_git_dir(), which can be totally different from what the function
expects when "gitdir" file is involved. Instead of giving the path to
the ".git" at the top of the working tree, we end up feeding the actual
path that the file points at.
This original location of ".git" however is only known to init_db().
Make init_db() save it and have it passed to create_default_files() as a
new parameter, which passes the correct location down to
needs_work_tree_config() to fix this.
Noticed-by: Max Nordlund <max.nordlund@sqore.com>
Helped-by: Michael J Gruber <git@drmicha.warpmail.net>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git init' is called from a linked worktree, we treat '.git'
dir (which is $GIT_COMMON_DIR/worktrees/something) as the main
'.git' (i.e. $GIT_COMMON_DIR) and populate the whole repository skeleton
in there. It does not harm anything (*) but it is still wrong.
Since 'git init' calls set_git_dir() at preparation time, which
indirectly calls get_common_dir() and correctly detects multiple
worktree setup, all git_path_buf() calls in create_default_files() will
return correct paths in both single and multiple worktree setups. The
only thing left is copy_templates(), which targets $GIT_DIR, not
$GIT_COMMON_DIR.
Fix that with get_git_common_dir(). This function will return $GIT_DIR
in single-worktree setup, so we don't have to make a special case for
multiple-worktree here.
(*) It does in fact, thanks to another bug. More on that later.
Noticed-by: Max Nordlund <max.nordlund@sqore.com>
Helped-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git_config() runs, it looks in the system, user-wide,
and repo-level config files. It gets the latter by calling
git_pathdup(), which in turn calls get_git_dir(). If we
haven't set up the git repository yet, this may simply
return ".git", and we will look at ".git/config". This
seems like it would be helpful (presumably we haven't set up
the repository yet, so it tries to find it), but it turns
out to be a bad idea for a few reasons:
- it's not sufficient, and therefore hides bugs in a
confusing way. Config will be respected if commands are
run from the top-level of the working tree, but not from
a subdirectory.
- it's not always true that we haven't set up the
repository _yet_; we may not want to do it at all. For
instance, if you run "git init /some/path" from inside
another repository, it should not load config from the
existing repository.
- there might be a path ".git/config", but it is not the
actual repository we would find via setup_git_directory().
This may happen, e.g., if you are storing a git
repository inside another git repository, but have
munged one of the files in such a way that the
inner repository is not valid (e.g., by removing HEAD).
We have at least two bugs of the second type in git-init,
introduced by ae5f677 (lazily load core.sharedrepository,
2016-03-11). It causes init to use git_configset(), which
loads all of the config, including values from the current
repo (if any). This shows up in two ways:
1. If we happen to be in an existing repository directory,
we'll read and respect core.sharedrepository from it,
even though it should have no bearing on the new
repository. A new test in t1301 covers this.
2. Similarly, if we're in an existing repo that sets
core.logallrefupdates, that will cause init to fail to
set it in a newly created repository (because it thinks
that the user's templates already did so). A new test
in t0001 covers this.
We also need to adjust an existing test in t1302, which
gives another example of why this patch is an improvement.
That test creates an embedded repository with a bogus
core.repositoryformatversion of "99". It wants to make sure
that we actually stop at the bogus repo rather than
continuing upward to find the outer repo. So it checks that
"git config core.repositoryformatversion" returns 99. But
that only works because we blindly read ".git/config", even
though we _know_ we're in a repository whose vintage we do
not understand.
After this patch, we avoid reading config from the unknown
vintage repository at all, which is a safer choice. But we
need to tweak the test, since core.repositoryformatversion
will not return 99; it will claim that it could not find the
variable at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Unix (and Linux), files and directories whose names start with a dot
are usually not shown by default. This convention is used by Git: the
.git/ directory should be left alone by regular users, and only accessed
through Git itself.
On Windows, no such convention exists. Instead, there is an explicit flag
to mark files or directories as hidden.
In the early days, Git for Windows did not mark the .git/ directory (or
for that matter, any file or directory whose name starts with a dot)
hidden. This lead to quite a bit of confusion, and even loss of data.
Consequently, Git for Windows introduced the core.hideDotFiles setting,
with three possible values: true, false, and dotGitOnly, defaulting to
marking only the .git/ directory as hidden.
The rationale: users do not need to access .git/ directly, and indeed (as
was demonstrated) should not really see that directory, either. However,
not all dot files should be hidden by default, as e.g. Eclipse does not
show them (and the user would therefore be unable to see, say, a
.gitattributes file).
In over five years since the last attempt to bring this patch into core
Git, a slightly buggy version of this patch has served Git for Windows'
users well: no single report indicated problems with the hidden .git/
directory, and the stream of problems caused by the previously non-hidden
.git/ directory simply stopped. The bugs have been fixed during the
process of getting this patch upstream.
Note that there is a funny quirk we have to pay attention to when
creating hidden files: we use Win32's _wopen() function which
transmogrifies its arguments and hands off to Win32's CreateFile()
function. That latter function errors out with ERROR_ACCESS_DENIED (the
equivalent of EACCES) when the equivalent of the O_CREAT flag was passed
and the file attributes (including the hidden flag) do not match an
existing file's. And _wopen() accepts no parameter that would be
transmogrified into said hidden flag. Therefore, we simply try again
without O_CREAT.
A slightly different method is required for our fopen()/freopen()
function as we cannot even *remove* the implicit O_CREAT flag.
Therefore, we briefly mark existing files as unhidden when opening them
via fopen()/freopen().
The ERROR_ACCESS_DENIED error can also be triggered by opening a file
that is marked as a system file (which is unlikely to be tracked in
Git), and by trying to create a file that has *just* been deleted and is
awaiting the last open handles to be released (which would be handled
better by the "Try again?" logic, a story for a different patch series,
though). In both cases, it does not matter much if we try again without
the O_CREAT flag, read: it does not hurt, either.
For details how ERROR_ACCESS_DENIED can be triggered, see
https://msdn.microsoft.com/en-us/library/windows/desktop/aa363858
Original-patch-by: Erik Faye-Lund <kusmabite@gmail.com>
Initial-Test-By: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hotfix for a test breakage made between 2.7 and 'master'.
* nd/clear-gitenv-upon-use-of-alias:
t0001: fix GIT_* environment variable check under --valgrind
When a test case is run without --valgrind, the wrap-for-bin.sh
helper script inserts the environment variable GIT_TEXTDOMAINDIR, but
when run with --valgrind, the variable is missing. A recently
introduced test case expects the presence of the variable, though, and
fails under --valgrind.
Rewrite the test case to strip conditially defined environment variables
from both expected and actual output.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
d95138e6 (setup: set env $GIT_WORK_TREE when work tree is set, like
$GIT_DIR, 2015-06-26) attempted to work around a glitch in alias
handling by overwriting GIT_WORK_TREE environment variable to
affect subprocesses when set_git_work_tree() gets called, which
resulted in a rather unpleasant regression to "clone" and "init".
Try to address the same issue by always restoring the environment
and respawning the real underlying command when handling alias.
* nd/clear-gitenv-upon-use-of-alias:
run-command: don't warn on SIGPIPE deaths
git.c: make sure we do not leak GIT_* to alias scripts
setup.c: re-fix d95138e (setup: set env $GIT_WORK_TREE when ..
git.c: make it clear save_env() is for alias handling only
The unfortunate commit d95138e (setup: set env $GIT_WORK_TREE when
work tree is set, like $GIT_DIR - 2015-06-26) exposes another problem,
besides git-clone that's described in the previous commit. If
GIT_WORK_TREE (or even GIT_DIR) is exported to an alias script, it may
mislead git commands in the script where the repo is. Granted, most
scripts work on the repo where the alias is summoned from. But nowhere
do we forbid the script to visit another repository.
The revert of d95138e in the previous commit is sufficient as a
fix. However, to protect us from accidentally leaking GIT_*
environment variables again, we restore certain sensitive env before
calling the external script.
GIT_PREFIX is let through because there's another setup side effect
that we simply accepted so far: current working directory is
moved. Maybe in future we can introduce a new alias format that
guarantees no cwd move, then we can unexport GIT_PREFIX.
Reported-by: Gabriel Ganne <gabriel.ganne@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The init code predates strbufs, and uses PATH_MAX-sized
buffers along with many manual checks on intermediate sizes
(some of which make magic assumptions, such as that init
will not create a path inside .git longer than 50
characters).
We can simplify this greatly by using strbufs, which drops
some hard-to-verify strcpy calls in favor of git_path_buf.
While we're in the area, let's also convert existing calls
to git_path to the safer git_path_buf (our existing calls
were passed to pretty tame functions, and so were not a
problem, but it's easy to be consistent and safe here).
Note that we had an explicit test that "git init" rejects
long template directories. This comes from 32d1776 (init: Do
not segfault on big GIT_TEMPLATE_DIR environment variable,
2009-04-18). We can drop the test_must_fail here, as we now
accept this and need only confirm that we don't segfault,
which was the original point of the test.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since time immemorial, the test of whether to set "core.filemode"
has been done by trying to toggle the u+x bit on $GIT_DIR/config,
which we know always exists, and then testing whether the change
"took". I find it somewhat odd to use the config file for this
test, but whatever.
The test code didn't set the u+x bit back to its original state
itself, instead relying on the subsequent call to git_config_set()
to re-write the config file with correct permissions.
But ever since
daa22c6f8d config: preserve config file permissions on edits (2014-05-06)
git_config_set() copies the permissions from the old config file to
the new one. This is a good change in and of itself, but it
invalidates the create_default_files()'s assumption, causing "git
init" to leave the executable bit set on $GIT_DIR/config.
Reset the permissions on $GIT_DIR/config when we are done with the
test in create_default_files().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some subcommands do not want to be aliased because of the side
effects that happens while the definitions of the aliases are looked
up from configuration system.
* nd/init-restore-env:
git potty: restore environments after alias expansion
Commit 4ad8332 (t0001: test git init when run via an alias -
2010-11-26) noted breakages when running init via alias. The problem
is for alias to be used, $GIT_DIR must be searched, but 'init' and
'clone' are not happy with that. So we start a new process like an
external command, with clean environment in this case. Env variables
that are set by command line (e.g. "git --git-dir=.. ") are kept.
This should also fix autocorrecting a command typo to "init" because
it's the same problem: aliases are read, then "init" is unhappy with
$GIT_DIR already set up because of that.
Reminded-by: David Turner <dturner@twopensource.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust shell scripts to use $(cmd) instead of `cmd`.
* ep/shell-command-substitution: (41 commits)
t5000-tar-tree.sh: use the $( ... ) construct for command substitution
t4204-patch-id.sh: use the $( ... ) construct for command substitution
t4119-apply-config.sh: use the $( ... ) construct for command substitution
t4116-apply-reverse.sh: use the $( ... ) construct for command substitution
t4057-diff-combined-paths.sh: use the $( ... ) construct for command substitution
t4038-diff-combined.sh: use the $( ... ) construct for command substitution
t4036-format-patch-signer-mime.sh: use the $( ... ) construct for command substitution
t4014-format-patch.sh: use the $( ... ) construct for command substitution
t4013-diff-various.sh: use the $( ... ) construct for command substitution
t4012-diff-binary.sh: use the $( ... ) construct for command substitution
t4010-diff-pathspec.sh: use the $( ... ) construct for command substitution
t4006-diff-mode.sh: use the $( ... ) construct for command substitution
t3910-mac-os-precompose.sh: use the $( ... ) construct for command substitution
t3905-stash-include-untracked.sh: use the $( ... ) construct for command substitution
t1050-large.sh: use the $( ... ) construct for command substitution
t1020-subdirectory.sh: use the $( ... ) construct for command substitution
t1004-read-tree-m-u-wf.sh: use the $( ... ) construct for command substitution
t1003-read-tree-prefix.sh: use the $( ... ) construct for command substitution
t1002-read-tree-m-u-2way.sh: use the $( ... ) construct for command substitution
t1001-read-tree-m-2way.sh: use the $( ... ) construct for command substitution
...
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many tests do something like:
(
mkdir foo &&
cd foo &&
git init
)
You can do the same these days with "git init foo", which
makes the tests shorter and simpler to read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many tests use subshells, but don't actually change the
shell environment. They were probably cargo-culted from
earlier tests which did need subshells. Drop the useless
ones.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We've hand-rolled several "if" statements looking for
failures. We can use test_must_fail here, which is shorter
and more robust.
Note that we modify the commands slightly (to use "git init
foo" rather than "cd foo && git init") to avoid dealing with
a subshell, but this should not affect the outcome.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We hand-set several config options using :
git config -f $HOME/.gitconfig ...
Instead, we can use "test_config_global". Not only is this
more readable, but it cleans up for us so that subsequent
tests aren't polluted by our settings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0001 predates the test_path_is_* helpers, and uses "test
-f" and "test -d" directly. Using the helpers provides
better debugging output, and are a little more robust.
As opposed to "! test -d", test_path_is_missing will
actually makes sure the path does not exist at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the final test of t0001, we have a repo whose .git is a
symlink to a directory "here", and we use
"--separate-git-dir" to migrate that to a .git file pointing
to a different directory. We check that the data is migrated
to the new directory and that .git looks like a git-file.
We also check that "here" is not a directory, which is
slightly misleading. It should not be a directory, but
neither should it be gone. It is the actual resting place of
the git-file, and .git remains a symlink to it.
Let's check that more explicitly, both to make our test more
robust, and to make further cleanups in this area more
obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests want to check or set config in another
repository. E.g., t1000 creates repositories and makes sure
that their core.bare and core.worktree settings are what we
expect. We can do this with:
GIT_CONFIG=$repo/.git/config git config ...
but it better shows the intent to just enter the repository
and let "git config" do the normal lookups:
(cd $repo && git config ...)
In theory, this would cause us to use an extra subshell, but
in all such cases, we are actually already in a subshell.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several test scripts manually unset GIT_CONFIG and other
GIT_* variables. These are generally taken care of for us by
test-lib.sh already.
Unsetting these is not only useless, but can be confusing to
a reader, who may wonder why some tests in a script unset
them and others do not (t0001 is particularly guilty of this
inconsistency, probably because many of its tests predate
the test-lib.sh environment-cleansing).
Note that we cannot always get rid of such unsetting. For
example, t9130 can drop the GIT_CONFIG unset, but not the
GIT_DIR one, because lib-git-svn.sh sets the latter. And in
t1000, we unset GIT_TEMPLATE_DIR, which is explicitly
initialized by test-lib.sh.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes reinitializing on a .git file repository work.
This is probably the only case that setup_git_env() (via
set_git_dir()) is called on a .git file. Other cases in
setup_git_dir_gently() and enter_repo() both cover .git file case
explicitly because they need to verify the target repo is valid.
Reported-by: Ximin Luo <infinity0@gmx.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/i18n-fixup: (24 commits)
i18n: use test_i18n{cmp,grep} in t7600, t7607, t7611 and t7811
i18n: use test_i18n{grep,cmp} in t7508
i18n: use test_i18ngrep in t7506
i18n: use test_i18ngrep and test_i18ncmp in t7502
i18n: use test_i18ngrep in t7501
i18n: use test_i18ncmp in t7500
i18n: use test_i18ngrep in t7201
i18n: use test_i18ncmp and test_i18ngrep in t7102 and t7110
i18n: use test_i18ncmp and test_i18ngrep in t5541, t6040, t6120, t7004, t7012 and t7060
i18n: use test_i18ncmp and test_i18ngrep in t3700, t4001 and t4014
i18n: use test_i18ncmp and test_i18ngrep in t3203, t3501 and t3507
i18n: use test_i18ngrep in t2020, t2204, t3030, and t3200
i18n: use test_i18ngrep in lib-httpd and t2019
i18n: do not overuse C_LOCALE_OUTPUT (grep)
i18n: use test_i18ncmp in t1200 and t2200
i18n: .git file is not a human readable message (t5601)
i18n: do not overuse C_LOCALE_OUTPUT
i18n: mark init-db messages for translation
i18n: mark checkout plural warning for translation
i18n: mark checkout --detach messages for translation
...
Instead of skipping the whole test, introduce test_i18ngrep wrapper that
pretends a successful result under GETTEXT_POISON build.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--separate-git-dir tells git to create git dir at the specified
location, instead of where it is supposed to be. A .git file that
points to that location will be put in place so that it appears normal
to repo discovery process.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that test-lib sets $HOME to protect against pollution from user
settings, GIT_CONFIG_NOGLOBAL is not needed for use by the test
suite any more. And as luck would have it, a quick code search
reveals no other users in the wild.
This patch does not affect GIT_CONFIG_NOSYSTEM, which is still
needed.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These messages could benefit from splitting up. An earlier version of
this patch began like this:
const char *reinit_shared = _("Reinitialized existing shared Git repository in %s\n");
const char *init_shared = _("Initialized empty shared Git repository in %s\n");
const char *reinit_noshared = _("Reinitialized existing Git repository in %s\n");
const char *init_noshared = _("Initialized empty Git repository in %s\n");
But in the first round of gettextization I'm aiming to keep code
changes to a minimum for ease of review. So just add a comment
explaining to translators how the sprintf format gets used so they
can cope for now if the language's grammar allows.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On some shells (like /usr/xpg4/bin/sh on Solaris), unset will exit
non-zero when passed the name of a variable that has not been set. Use
sane_unset instead so that the return value of unset can be ignored while
the && linkage of the test script can be preserved.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/setup: (47 commits)
setup_work_tree: adjust relative $GIT_WORK_TREE after moving cwd
git.txt: correct where --work-tree path is relative to
Revert "Documentation: always respect core.worktree if set"
t0001: test git init when run via an alias
Remove all logic from get_git_work_tree()
setup: rework setup_explicit_git_dir()
setup: clean up setup_discovered_git_dir()
t1020-subdirectory: test alias expansion in a subdirectory
setup: clean up setup_bare_git_dir()
setup: limit get_git_work_tree()'s to explicit setup case only
Use git_config_early() instead of git_config() during repo setup
Add git_config_early()
git-rev-parse.txt: clarify --git-dir
t1510: setup case #31
t1510: setup case #30
t1510: setup case #29
t1510: setup case #28
t1510: setup case #27
t1510: setup case #26
t1510: setup case #25
...
Add some tests to document the correct behavior of (possibly aliased)
init when run within and outside a git directory.
If I set up a simple git alias “quietinit = init --quiet”, usually it
will work just like ‘git init --quiet’.
There are some differences, unfortunately, since in the process of
checking for aliases, git has to look for a .git/config file. If ‘git
quietinit’ is run from a subdirectory of an existing git repository,
that repository’s configuration will affect the configuration of the
new repository. In particular, the new repository can inherit
bogus values for core.bare and core.worktree.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The same pattern is used in many tests, and makes it easy for new ones to
rely on $HOME being a trashable, clean, directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests depend on not being able to write to files after chmod
-w. This doesn't work when running the tests as root.
Change test-lib.sh to test if this works, and if so it sets a new
SANITY test prerequisite. The tests that use this previously failed
when run under root.
There was already a test for this in t3600-rm.sh, added by Junio C
Hamano in 2283645 in 2006. That check now uses the new SANITY
prerequisite.
Some of this was resurrected from the "Tests in Cygwin" thread in May
2009:
http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we know we are creating a bare repository, we use setenv
to set the GIT_DIR directory to the current directory
(either where we already were, or one we created and chdir'd
into with "git init --bare <dir>").
However, with "git --bare init <dir>" (note the --bare as a
git wrapper option), the setup code actually sets GIT_DIR
for us, but it uses the wrong, original cwd when a directory
is given. Because our setenv does not use the overwrite
flag, it is ignored.
We need to set the overwrite flag, but only when we are
given a directory on the command line. That still allows:
GIT_DIR=foo.git git init --bare
to work. The behavior is changed for:
GIT_DIR=foo.git git init --bare bar.git
which used to create the repository in foo.git, but now will
use bar.git. This is more sane, as command line options
should generally override the environment.
Noticed by Oliver Hoffmann.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
