Instead of reading the whole directory of loose references the first
time any are needed, only read them on demand, one directory at a
time.
Use a new ref_entry flag bit REF_INCOMPLETE to indicate that the entry
represents a REF_DIR that hasn't been read yet. Whenever any entries
from such a directory are needed, read all of the loose references
from that directory.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref_cache can now be read from the ref_dir.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This means that a directory ref_entry contains all of the information
needed by read_loose_refs().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
That is what all the callers want, so give it to them.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert all accesses of a ref_dir within a ref_entry to use this
function. This function will later be responsible for reading loose
references from disk on demand.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new name better describes the function's purpose, and also makes
the old name available for a more suitable purpose.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it turtles all the way down. This affects the loose and packed
fields of ref_cache instances.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies the bookkeeping and allows an (artificial) restriction
on refname component length to be removed.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, the "dir" argument to get_ref_dir() was a pointer to the
top-level ref_dir. Change the function to expect a pointer to the
ref_dir corresponding to dirname. This allows entries to be added
directly to dir, without having to recurse through the reference trie
each time (i.e., we can use add_entry_to_dir() instead of add_ref()).
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes some conditional code and makes it consistent with the
way that direntry names are stored. Please note that this function is
never used on the top-level .git directory; it is always called for
directories at level .git/refs or deeper.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies the bookkeeping and allows an (artificial) restriction
on refname component length to be removed.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More message strings marked for i18n.
By Nguyễn Thái Ngọc Duy (10) and Jonathan Nieder (1)
* nd/i18n:
help: replace underlining "help -a" headers using hyphens with a blank line
i18n: bundle: mark strings for translation
i18n: index-pack: mark strings for translation
i18n: apply: update say_patch_name to give translators complete sentence
i18n: apply: mark strings for translation
i18n: remote: mark strings for translation
i18n: make warn_dangling_symref() automatically append \n
i18n: help: mark strings for translation
i18n: mark relative dates for translation
strbuf: convenience format functions with \n automatically appended
Makefile: feed all header files to xgettext
This helps remove \n from translatable strings
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the base argument has a "/" chararacter, then only iterate over the
reference subdir whose name is the part up to the last "/".
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Store references hierarchically in a tree that matches the
pseudo-directory structure of the reference names. Add a new kind of
ref_entry (with flag REF_DIR) to represent a whole subdirectory of
references. Sort ref_dirs one subdirectory at a time.
NOTE: the dirs can now be sorted as a side-effect of other function
calls. Therefore, it would be problematic to do something from a
each_ref_fn callback that could provoke the sorting of a directory
that is currently being iterated over (i.e., the directory containing
the entry that is being processed or any of its parents).
This is a bit far-fetched, because a directory is always sorted just
before being iterated over. Therefore, read-only accesses cannot
trigger the sorting of a directory whose iteration has already
started. But if a callback function would add a reference to a parent
directory of the reference in the iteration, then try to resolve a
reference under that directory, a re-sort could be triggered and cause
the iteration to work incorrectly.
Nevertheless...add a comment in refs.h warning against modifications
during iteration.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the more usual indexing idiom for clarity.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This purely textual change is in preparation for storing references
hierarchically, when the old ref_array structure will represent one
"directory" of references. Rename functions that deal with this
structure analogously, and also rename the structure's "refs" member
to "entries".
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change is obviously silly by itself, but it is a step towards
adding a second member to the union.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Return 0 (instead of -1) for zero-length components. Move the
interpretation of zero-length components as illegal to
check_refname_format().
This will make it easier to extend check_refname_format() to also
check whether directory names are valid.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function free_ref_entry(). This function will become nontrivial
when ref_entry (soon) becomes polymorphic.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Save a bunch of lines of code and a couple of strlen() calls.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It costs a bit of boilerplate, but it means that the function can be
ignorant of how cached refs are stored.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract function do_for_each_ref_in_arrays() from do_for_each_ref().
The new function will be a useful building block for storing refs
hierarchically.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract function do_for_each_ref_in_array() from do_for_each_ref().
The new function will be a useful building block for storing refs
hierarchically.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set and clear current_ref within do_one_ref() instead of setting it
here and leaving it to somebody else to clear it.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reorder definitions in file: first check_refname_format() and helper
functions, then the functions for managing the ref_entry and ref_array
data structures, then ref_cache, then the more "business-logicky"
stuff. No code is changed.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The extra_refs provided a kludgy way to create fake references at a
global level in the hope that they would only affect some particular
code path. The last user of this API been rewritten, so strip this
stuff out before somebody else gets the bad idea of using it.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new function add_packed_ref() that adds a reference directly to
the in-memory packed reference cache. This will be useful for
creating local references while cloning.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keep track of how many entries at the beginning of a ref_array are already
sorted. In sort_ref_array(), return early if the the array is already
sorted (i.e., if no new references has been appended to the end of the
list since the last call to sort_ref_array()).
Sort ref_arrays only when needed, namely in search_ref_array() and in
do_for_each_ref(). However, never call sort_ref_array() on the
extra_refs, because extra_refs can contain multiple entries with the same
name and because sort_ref_array() not only sorts, but de-dups its
contents.
This change is currently not useful, because entries are not added to
ref_arrays after they are created. But in a moment they will be...
Implementation note: we could store a binary "sorted" value instead of
an integer, but storing the number of sorted entries leaves the way
open for a couple of possible future optimizations:
* In sort_ref_array(), sort *only* the unsorted entries, then merge
them with the sorted entries. This should be faster if most of the
entries are already sorted.
* Teach search_ref_array() to do a binary search of any sorted
entries, and if unsuccessful do a linear search of any unsorted
entries. This would avoid the need to sort the list every time that
search_ref_array() is called, and (given some intelligence about how
often to sort) could significantly improve the speed in certain
hypothetical usage patterns.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/ref-api:
add_ref(): take a (struct ref_entry *) parameter
create_ref_entry(): extract function from add_ref()
repack_without_ref(): remove temporary
resolve_gitlink_ref_recursive(): change to work with struct ref_cache
Pass a (ref_cache *) to the resolve_gitlink_*() helper functions
resolve_gitlink_ref(): improve docstring
get_ref_dir(): change signature
refs: change signatures of get_packed_refs() and get_loose_refs()
is_dup_ref(): extract function from sort_ref_array()
add_ref(): add docstring
parse_ref_line(): add docstring
is_refname_available(): remove the "quiet" argument
clear_ref_array(): rename from free_ref_array()
refs: rename parameters result -> sha1
refs: rename "refname" variables
struct ref_entry: document name member
Conflicts:
cache.h
refs.c
resolve_ref() may return a pointer to a shared buffer and can be
overwritten by the next resolve_ref() calls. Callers need to
pay attention, not to keep the pointer when the next call happens.
Rename with "_unsafe" suffix to warn developers (or reviewers) before
introducing new call sites.
This patch is generated using the following command
git grep -l 'resolve_ref(' -- '*.[ch]'|xargs sed -i 's/resolve_ref(/resolve_ref_unsafe(/g'
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Take a pointer to the ref_entry to add to the array, rather than
creating the ref_entry within the function. This opens the way to
having multiple kinds of ref_entries.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Separate the creation of the ref_entry from its addition to a ref_array.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_gitlink_ref() and resolve_gitlink_ref_recursive(), together,
basically duplicated the code in git_path_submodule(). So use that
function instead.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
And remove some redundant arguments from resolve_gitlink_packed_ref().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change get_ref_dir() to take a (struct ref_cache *) in place of the
submodule name.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change get_packed_refs() and get_loose_refs() to take a (struct
ref_cache *) instead of the name of the submodule.
Change get_ref_dir() to take a submodule name (i.e., "" for the main
module) rather than a submodule pointer (i.e., NULL for the main
module) so that refs->name can be used as its argument. (In a moment
this function will also be changed to take a (struct ref_cache *),
too.)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Giving the function a name makes the code easier to understand.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
quiet was always set to 0, so get rid of it. Add a function docstring
for good measure.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the function since it doesn't actually free the array object
that is passed to it.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Try consistently to use the name "sha1" for parameters to which a SHA1
will be stored.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Try to consistently use the variable name "refname" when referring to
a string that names a reference.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/resolve-ref:
Copy resolve_ref() return value for longer use
Convert many resolve_ref() calls to read_ref*() and ref_exists()
Conflicts:
builtin/fmt-merge-msg.c
builtin/merge.c
refs.c
* jc/pull-signed-tag:
commit-tree: teach -m/-F options to read logs from elsewhere
commit-tree: update the command line parsing
commit: teach --amend to carry forward extra headers
merge: force edit and no-ff mode when merging a tag object
commit: copy merged signed tags to headers of merge commit
merge: record tag objects without peeling in MERGE_HEAD
merge: make usage of commit->util more extensible
fmt-merge-msg: Add contents of merged tag in the merge message
fmt-merge-msg: package options into a structure
fmt-merge-msg: avoid early returns
refs DWIMmery: use the same rule for both "git fetch" and others
fetch: allow "git fetch $there v1.0" to fetch a tag
merge: notice local merging of tags and keep it unwrapped
fetch: do not store peeled tag object names in FETCH_HEAD
Split GPG interface into its own helper library
Conflicts:
builtin/fmt-merge-msg.c
builtin/merge.c
The add_extra_ref() interface is used to add an extra-ref that is _not_
our ref for the purpose of helping auto-following of tags and reducing
object transfer from remote repository, and they are typically formatted
as a tagname followed by ^{} to make sure no valid refs match that
pattern. In other words, these entries are deliberately formatted not to
pass check-refname-format test.
A recent series however added a test unconditionally to the add_ref()
function that is called from add_extra_ref(). The check may be sensible
for other two callsites of the add_ref() interface, but definitely is
a wrong thing to do in add_extra_ref(). Disable it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
resolve_ref() may return a pointer to a static buffer, which is not
safe for long-term use because if another resolve_ref() call happens,
the buffer may be changed. Many call sites though do not care about
this buffer. They simply check if the return value is NULL or not.
Convert all these call sites to new wrappers to reduce resolve_ref()
calls from 57 to 34. If we change resolve_ref() prototype later on
to avoid passing static buffer out, this helps reduce changes.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log frotz" can DWIM to "refs/remotes/frotz/HEAD", but in the remote
access context, "git fetch frotz" to fetch what the other side happened to
have fetched from what it calls 'frotz' (which may not have any relation
to what we consider is 'frotz') the last time would not make much sense,
so the fetch rules table did not include "refs/remotes/%.*s/HEAD".
When the user really wants to, "git fetch $there remotes/frotz/HEAD" would
let her do so anyway, so this is not about safety or security; it merely
is about confusion avoidance and discouraging meaningless usage.
Specifically, it is _not_ about ambiguity avoidance. A name that would
become ambiguous if we use the same rules table for both fetch and local
rev-parse would be ambiguous locally at the remote side.
So for the same reason as we added rule to allow "git fetch $there v1.0"
instead of "git fetch $there tags/v1.0" in the previous commit, here is a
bit longer rope for the users, which incidentally simplifies our code.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can already do so with "git fetch $there tags/v1.0" but if it is not
ambiguous there is no reason to force users to type more.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/broken-ref-dwim-fix:
resolve_ref(): report breakage to the caller without warning
resolve_ref(): expose REF_ISBROKEN flag
refs.c: move dwim_ref()/dwim_log() from sha1_name.c
* mh/ref-api:
clear_ref_cache(): inline function
write_ref_sha1(): only invalidate the loose ref cache
clear_ref_cache(): extract two new functions
clear_ref_cache(): rename parameter
invalidate_ref_cache(): expose this function in the refs API
invalidate_ref_cache(): take the submodule as parameter
invalidate_ref_cache(): rename function from invalidate_cached_refs()
629cd3a (resolve_ref(): emit warnings for improperly-formatted references,
2011-09-15) made resolve_ref() warn against files that are found in the
directories the ref dwimmery looks at. The intent may be good, but these
messages come from a wrong level of the API hierarchy.
Instead record the breakage in "flags" whose purpose is to explain the
result of the function to the caller, who is in a much better position to
make intelligent decision based on the information.
This updates sha1_name.c::dwim_ref() to warn against such a broken
candidate only when it does not appear directly below $GIT_DIR to restore
the traditional behaviour, as we know many files directly underneath
$GIT_DIR/ are not refs.
Warning against "git show config --" with "$GIT_DIR/config does not look
like a well-formed ref" does not make sense, and we may later tweak the
dwimmery not to even consider them as candidates, but that is a longer
term topic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of keeping this as an internal API, let the callers find
out the reason why resolve_ref() returned NULL is not because there
was no such file in $GIT_DIR but because a file was corrupt.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2c5c66b (Merge branch 'jp/get-ref-dir-unsorted', 2011-10-10) merged a
topic that forked from the mainline before a new helper function
get_packed_refs() refactored code to read packed-refs file. The merge made
the call to the helper function with an incorrect argument. The parameter
to the function has to be a path to the submodule.
Fix the mismerge.
Helped-by: Mark Levedahl <mlevedahl@gmail.com>
Helped-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
clear_ref_cache() was only called from one place, so inline it
there.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since write_ref_sha1() can only write loose refs and cannot write
symbolic refs, there is no need for it to invalidate the packed ref
cache.
Suggested by: Martin Fick <mfick@codeaurora.org>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract two new functions from clear_cached_refs():
clear_loose_ref_cache() and clear_packed_ref_cache().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
...for consistency with the rest of this module.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make invalidate_ref_cache() an official part of the refs API. It is
currently a fact of life that code outside of refs.c mucks about with
references. This change gives such code a way of informing the refs
module that it should no longer trust its cache.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of invalidating the ref cache on an all-or-nothing basis,
invalidate the cache for a specific submodule.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is the cache that is being invalidated, not the references, and the
new name makes this unambiguous. Rename other items analogously:
* struct cached_refs -> struct ref_cache
* cached_refs (the variable) -> ref_cache
* clear_cached_refs() -> clear_ref_cache()
* create_cached_refs() -> create_ref_cache()
* get_cached_refs() -> get_ref_cache()
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both dwim_ref()/dwim_log() functions are intimately related to the ref
parsing rules defined in refs.c and better fits there. Move them together
with substitute_branch_name(), a file scope static helper function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit message for c976d41 (git-branch: add options and tests for
branch renaming, 2006-11-28) mentions RENAME_REF but otherwise this is not
documented anywhere, and it does not appear in any of the tests.
Worse yet, the name of the actual file is "RENAMED-REF".
This was supposed to hold the commit object name at the tip of the branch
the most recent "branch -m/-M" renamed, but that is not necessary in order
to be able to recover from a mistake. Even when "branch -M A B" overwrites
an existing branch B, what is kept in RENAMED-REF is the commit at the tip
of the original branch A, not the commit B from the now-lost branch.
Just remove this unused "feature".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jp/get-ref-dir-unsorted:
refs.c: free duplicate entries in the ref array instead of leaking them
refs.c: abort ref search if ref array is empty
refs.c: ensure struct whose member may be passed to realloc is initialized
refs: Use binary search to lookup refs faster
Don't sort ref_list too early
Conflicts:
refs.c
* mh/check-ref-format-3: (23 commits)
add_ref(): verify that the refname is formatted correctly
resolve_ref(): expand documentation
resolve_ref(): also treat a too-long SHA1 as invalid
resolve_ref(): emit warnings for improperly-formatted references
resolve_ref(): verify that the input refname has the right format
remote: avoid passing NULL to read_ref()
remote: use xstrdup() instead of strdup()
resolve_ref(): do not follow incorrectly-formatted symbolic refs
resolve_ref(): extract a function get_packed_ref()
resolve_ref(): turn buffer into a proper string as soon as possible
resolve_ref(): only follow a symlink that contains a valid, normalized refname
resolve_ref(): use prefixcmp()
resolve_ref(): explicitly fail if a symlink is not readable
Change check_refname_format() to reject unnormalized refnames
Inline function refname_format_print()
Make collapse_slashes() allocate memory for its result
Do not allow ".lock" at the end of any refname component
Refactor check_refname_format()
Change check_ref_format() to take a flags argument
Change bad_ref_char() to return a boolean value
...
* mh/iterate-refs:
refs.c: make create_cached_refs() static
Retain caches of submodule refs
Store the submodule name in struct cached_refs
Allocate cached_refs objects dynamically
Change the signature of read_packed_refs()
Access reference caches only through new function get_cached_refs()
Extract a function clear_cached_refs()
The bsearch() implementation on IRIX 6.5 segfaults if it is passed NULL
for the base array argument even if number-of-elements is zero. So, let's
work around it by detecting an empty array and aborting early.
This is a useful optimization in its own right anyway, since we avoid a
useless allocation and initialization of the ref_entry when the ref array
is empty.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variable "refs" is allocated on the stack but is not initialized. It
is passed to read_packed_refs(), and its struct members may eventually be
passed to add_ref() and ALLOC_GROW(). Since the structure has not been
initialized, its members may contain random non-zero values. So let's
initialize it.
The call sequence looks something like this:
resolve_gitlink_packed_ref(...) {
struct cached_refs refs;
...
read_packed_refs(f, &refs);
...
}
read_packed_refs(FILE*, struct cached_refs *cached_refs) {
...
add_ref(name, sha1, flag, &cached_refs->packed, &last);
...
}
add_ref(..., struct ref_array *refs, struct ref_entry **) {
...
ALLOC_GROW(refs->refs, refs->nr + 1, refs->alloc);
}
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In add_ref(), verify that the refname is formatted correctly before
adding it to the ref_list. Here we have to allow refname components
that start with ".", since (for example) the remote protocol uses
synthetic reference name ".have". So add a new REFNAME_DOT_COMPONENT
flag that can be passed to check_refname_format() to allow leading
dots.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Record information about resolve_ref(), hard-won via reverse
engineering, in a comment for future spelunkers.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the SHA1 in a reference file is not terminated by a space or
end-of-file, consider it malformed and emit a warning.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While resolving references, if a reference is found that is in an
unrecognized format, emit a warning (and then fail, as before).
Wouldn't *you* want to know?
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Emit a warning and fail if a symbolic reference refers to an
incorrectly-formatted refname.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Making it a function and giving it a name makes the code clearer. I
also have a strong suspicion that the function will find other uses in
the future.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Immediately strip off trailing spaces and null-terminate the string
holding the contents of the reference file; this allows the use of
string functions and avoids the need to keep separate track of the
string's length. (get_sha1_hex() fails automatically if the string is
too short.)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Terminate the link content string one step earlier, allowing
prefixcmp() to be used instead of the less clear memcmp().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the failure came later, after a few steps in which the
length was treated like the actual length of a string. Even though
the old code gave the same answers, it was somewhat misleading.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since much of the infrastructure does not work correctly with
unnormalized refnames, change check_refname_format() to reject them.
Similarly, change "git check-ref-format" to reject unnormalized
refnames by default. But add an option --normalize, which causes "git
check-ref-format" to normalize the refname before checking its format,
and print the normalized refname. This is exactly the behavior of the
old --print option, which is retained but deprecated.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allowing any refname component to end with ".lock" is looking for
trouble; for example,
$ git br foo.lock/bar
$ git br foo
fatal: Unable to create '[...]/.git/refs/heads/foo.lock': File exists.
Therefore, do not allow any refname component to end with ".lock".
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Among other things, extract a function check_refname_component().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change check_ref_format() to take a flags argument that indicates what
is acceptable in the reference name (analogous to "git
check-ref-format"'s "--allow-onelevel" and "--refspec-pattern"). This
is more convenient for callers and also fixes a failure in the test
suite (and likely elsewhere in the code) by enabling "onelevel" and
"refspec-pattern" to be allowed independently of each other.
Also rename check_ref_format() to check_refname_format() to make it
obvious that it deals with refnames rather than references themselves.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously most bad characters were indicated by returning 1, but "*"
was special-cased to return 2 instead of 1. One caller examined the
return value to see whether the special case occurred.
But it is easier (to document and understand) for bad_ref_char()
simply to return a boolean value, treating "*" like any other bad
character. Special-case the handling of "*" (which only occurs in
very specific circumstances) at the caller. The resulting calling
code thereby also becomes more transparent.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently we linearly search through lists of refs when we need to
find a specific ref. This can be very slow if we need to lookup a
large number of refs. By changing to a binary search we can make this
faster.
In order to be able to use a binary search we need to change from
using linked lists to arrays, which we can manage using ALLOC_GROW.
We can now also use the standard library qsort function to sort the
refs arrays.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_ref_dir is called recursively for subdirectories, which means that
we were calling sort_ref_list for each directory of refs instead of
once for all the refs. This is a massive wast of processing, so now
just call sort_ref_list on the result of the top-level get_ref_dir, so
that the sort is only done once.
In the common case of only a few different directories of refs the
difference isn't very noticable, but it becomes very noticeable when
you have a large number of direcotries containing refs (e.g. as
created by Gerrit).
Reported by Martin Fick.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
DEL is an ASCII control character and therefore should not be
permitted in reference names. Add tests for this and other unusual
characters.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function was not gentle at all to the callers and died without giving
them a chance to deal with possible errors. Rename it to read_gitfile(),
and update all the callers.
As no existing caller needs a true "gently" variant, we do not bother
adding one at this point.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of keeping track of one cache for refs in the main repo and
another single cache shared among submodules, keep a linked list of
cached_refs objects, one for each module/submodule. Change
invalidate_cached_refs() to invalidate all caches. (Previously, it
only invalidated the cache of the main repo because the submodule
caches were not reused anyway.)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change it to return a (struct ref_list *) instead of writing into
a cached_refs structure. (This removes the need to create a
cached_refs structure in resolve_gitlink_packed_ref(), where it
is otherwise unneeded.)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for dividing the refs of a single repository into multiple
namespaces, each of which can have its own branches, tags, and HEAD.
Git can expose each namespace as an independent repository to pull from
and push to, while sharing the object store, and exposing all the refs
to operations such as git-gc.
Storing multiple repositories as namespaces of a single repository
avoids storing duplicate copies of the same objects, such as when
storing multiple branches of the same source. The alternates mechanism
provides similar support for avoiding duplicates, but alternates do not
prevent duplication between new objects added to the repositories
without ongoing maintenance, while namespaces do.
To specify a namespace, set the GIT_NAMESPACE environment variable to
the namespace. For each ref namespace, git stores the corresponding
refs in a directory under refs/namespaces/. For example,
GIT_NAMESPACE=foo will store refs under refs/namespaces/foo/. You can
also specify namespaces via the --namespace option to git.
Note that namespaces which include a / will expand to a hierarchy of
namespaces; for example, GIT_NAMESPACE=foo/bar will store refs under
refs/namespaces/foo/refs/namespaces/bar/. This makes paths in
GIT_NAMESPACE behave hierarchically, so that cloning with
GIT_NAMESPACE=foo/bar produces the same result as cloning with
GIT_NAMESPACE=foo and cloning from that repo with GIT_NAMESPACE=bar. It
also avoids ambiguity with strange namespace paths such as
foo/refs/heads/, which could otherwise generate directory/file conflicts
within the refs directory.
Add the infrastructure for ref namespaces: handle the GIT_NAMESPACE
environment variable and --namespace option, and support iterating over
refs in a namespace.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The do_for_each_ref iteration function accepts a prefix and a trim, and
checks for the prefix on each ref before passing in that ref; it also
supports trimming off part of the ref before passing it. However,
do_for_each_ref used trim as the length of the prefix to check, ignoring
the actual length of the prefix. Switch to using prefixcmp, checking
the entire length of the prefix string, to properly support a trim value
different than the length of the prefix.
Several callers passed a prefix of "refs/" to filter out everything
outside of refs/, but a trim of 0 to avoid trimming off the "refs/"; the
trim of 0 meant that the filter of "refs/" no longer applied. Change
these callers to pass an empty prefix instead, to avoid changing the
existing behavior. Various callers count on this lack of filtering,
such as receive-pack which uses add_extra_ref to add alternates as refs
named ".have"; adding filtering would break that, causing
t5501-fetch-push-alternates.sh to fail. That lack of filtering doesn't
currently have any other effect, since the loose ref functions can never
supply refs outside of "refs/", and packed-refs will not normally
include such refs unless manually edited.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
refs.c had a error message "Trying to write ref with nonexistant object".
And no tests relied on the wrong spelling.
Also typo was present in some test scripts internals, these tests still pass.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When create a new branch, we fed "refs/heads/<proposed name>" as a string
to get_sha1() and expected it to fail when a branch already exists.
The right way to check if a ref exists is to check with resolve_ref().
A naïve solution that might appear attractive but does not work is to
forbid slashes in get_describe_name() but that will not work. A describe
name is is in the form of "ANYTHING-g<short sha1>", and that ANYTHING part
comes from a original tag name used in the repository the user ran the
describe command. A sick user could have a confusing hierarchical tag
whose name is "refs/heads/foobar" (stored as refs/tags/refs/heads/foobar")
to generate a describe name "refs/heads/foobar-6-g02ac983", and we should
be able to use that name to refer to the object whose name is 02ac983.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* hv/submodule-find-ff-merge:
Implement automatic fast-forward merge for submodules
setup_revisions(): Allow walking history in a submodule
Teach ref iteration module about submodules
Conflicts:
submodule.c
* maint:
backmerge a few more fixes to 1.7.1.X series
rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
fix git branch -m in presence of cross devices
Conflicts:
RelNotes
builtin/rev-parse.c
By passing the path to a submodule in opt->submodule, the function can
be used to walk history in the named submodule repository, instead of
the toplevel repository.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will use this in a later patch to extend setup_revisions() to
load revisions directly from a submodule.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have for example a bare repository stored on NFS, and that you
create new workdirs locally (using contrib's git-new-workdir), logs/refs
is a symlink to a different device. Hence when the reflogs are renamed,
all must happen below logs/refs or one gets cross device rename errors
like:
git branch -m foo
error: unable to move logfile logs/refs/heads/master to tmp-renamed-log: Invalid cross-device link
fatal: Branch rename failed
The fix is hence to use logs/refs/.tmp-renamed-log as a temporary log
name, instead of just tmp-renamed-log.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gv/portable:
test-lib: use DIFF definition from GIT-BUILD-OPTIONS
build: propagate $DIFF to scripts
Makefile: Tru64 portability fix
Makefile: HP-UX 10.20 portability fixes
Makefile: HPUX11 portability fixes
Makefile: SunOS 5.6 portability fix
inline declaration does not work on AIX
Allow disabling "inline"
Some platforms lack socklen_t type
Make NO_{INET_NTOP,INET_PTON} configured independently
Makefile: some platforms do not have hstrerror anywhere
git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition
test_cmp: do not use "diff -u" on platforms that lack one
fixup: do not unconditionally disable "diff -u"
tests: use "test_cmp", not "diff", when verifying the result
Do not use "diff" found on PATH while building and installing
enums: omit trailing comma for portability
Makefile: -lpthread may still be necessary when libc has only pthread stubs
Rewrite dynamic structure initializations to runtime assignment
Makefile: pass CPPFLAGS through to fllow customization
Conflicts:
Makefile
wt-status.h
859c301 (refs: split log_ref_write logic into log_ref_setup,
2010-05-21) refactors the stack allocation of the log_file array into
the new log_ref_setup() function, but passes it back to the caller.
Since the original intent seems to have been to split the work between
log_ref_setup and log_ref_write, make it the caller's responsibility
to allocate the buffer.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Separation of the logic for testing and preparing the reflogs from
function log_ref_write to a new non static new function: log_ref_setup.
This allows to be performed from outside the first all reasonable checks
and procedures for writing reflogs.
Signed-off-by: Erick Mattos <erick.mattos@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unfortunately, there are still plenty of production systems with
vendor compilers that choke unless all compound declarations can be
determined statically at compile time, for example hpux10.20 (I can
provide a comprehensive list of our supported platforms that exhibit
this problem if necessary).
This patch simply breaks apart any compound declarations with dynamic
initialisation expressions, and moves the initialisation until after
the last declaration in the same block, in all the places necessary to
have the offending compilers accept the code.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The notes code intends to write reflog entries, but currently they are
not written because log_ref_write() checks for the refname path
explicitly.
Add refs/notes to the list of allowed paths so that notes references are
treated just like branch heads, i.e. according to core.logAllRefUpdates
and core.bare.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/notes-display:
git-notes(1): add a section about the meaning of history
notes: track whether notes_trees were changed at all
notes: add shorthand --ref to override GIT_NOTES_REF
commit --amend: copy notes to the new commit
rebase: support automatic notes copying
notes: implement helpers needed for note copying during rewrite
notes: implement 'git notes copy --stdin'
rebase -i: invoke post-rewrite hook
rebase: invoke post-rewrite hook
commit --amend: invoke post-rewrite hook
Documentation: document post-rewrite hook
Support showing notes from more than one notes tree
test-lib: unset GIT_NOTES_REF to stop it from influencing tests
Conflicts:
git-am.sh
refs.c
Brandon Casey noticed that t5505 had accidentally broken its && chain,
hiding inconsistency between the code that writes the warning to the
standard output and the test that expects to see the warning on the
standard error, which was introduced by f8948e2 (remote prune: warn
dangling symrefs, 2009-02-08).
It turns out that the issue is deeper than that. After f8948e2, a symref
that is dangling is marked with a NULL sha1, and the idea of using NULL
sha1 to mean a deleted ref was scrapped, but somehow a follow-up eafb452
(do_one_ref(): null_sha1 check is not about broken ref, 2009-07-22)
incorrectly reorganized do_one_ref(), still thinking NULL sha1 is never
used in the code.
Fix this by:
- adopt Brandon's fix to t5505 test;
- introduce REF_BROKEN flag to mark a ref that fails to resolve (dangling
symref);
- move the check for broken ref back inside the "if we are skipping
dangling refs" code block.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As Vladimir reported, "git log -g refs/stash" surprisingly showed the reflog
of HEAD if the message in the reflog file was too long. To fix this, convert
for_each_recent_reflog_ent() to use strbuf_getwholeline() instead of fgets(),
for safety and to avoid any size limits for reflog entries.
Also reverse the logic of the part of the function that only looks at file
tails. It used to close the file if fgets() succeeded. The following
fgets() call in the while loop was likely to fail in this case, too, so
passing an offset to for_each_recent_reflog_ent() never worked. Change it to
error out if strbuf_getwholeline() fails instead.
Reported-by: Vladimir Panteleev <vladimir@thecybershadow.net>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, you can set notes.displayRef to a glob that points at
your favourite notes refs, e.g.,
[notes]
displayRef = refs/notes/*
Then git-log and friends will show notes from all trees.
Thanks to Junio C Hamano for lots of feedback, which greatly
influenced the design of the entire series and this commit in
particular.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since local branch, tags and remote tracking branch namespaces are
most often used, add shortcut notations for globbing those in
manner similar to --glob option.
With this, one can express the "what I have but origin doesn't?"
as:
'git log --branches --not --remotes=origin'
Original-idea-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add --glob=<glob-pattern> option to rev-parse and everything that
accepts its options. This option matches all refs that match given
shell glob pattern (complete with some DWIM logic).
Example:
'git log --branches --not --glob=remotes/origin'
To show what you have that origin doesn't.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Different callers of warn_dangling_symref() may want to control whether its
output goes to stdout or stderr so let it take a FILE argument.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the old error message just told the user that it was not
possible to delete the ref from the packed-refs file. Give instructions
on how to resolve the problem.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* cc/replace:
t6050: check pushing something based on a replaced commit
Documentation: add documentation for "git replace"
Add git-replace to .gitignore
builtin-replace: use "usage_msg_opt" to give better error messages
parse-options: add new function "usage_msg_opt"
builtin-replace: teach "git replace" to actually replace
Add new "git replace" command
environment: add global variable to disable replacement
mktag: call "check_sha1_signature" with the replacement sha1
replace_object: add a test case
object: call "check_sha1_signature" with the replacement sha1
sha1_file: add a "read_sha1_file_repl" function
replace_object: add mechanism to replace objects found in "refs/replace/"
refs: add a "for_each_replace_ref" function
When you have an embedded git work tree in your work tree (be it
an orphaned submodule, or an independent checkout of an unrelated
project), "git clean -d -f" blindly descended into it and removed
everything. This is rarely what the user wants.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
SunOS grep does not understand -C<n> nor -e
Fix export_marks() error handling.
git branch: clean up detached branch handling
git branch: avoid unnecessary object lookups
git branch: fix performance problem
do_one_ref(): null_sha1 check is not about broken ref
Conflicts:
Makefile
f8948e2 (remote prune: warn dangling symrefs, 2009-02-08) introduced a
more dangerous variant of for_each_ref() family that skips the check for
dangling refs, but it also made another unrelated check optional by
mistake.
The check to see if a ref points at 0{40} is not about brokenness, but is
about a possible future plan to represent a deleted ref by writing 40 "0"
in a loose ref when there is a stale version of the same ref already in
.git/packed-refs, so that we can implement deletion of a ref without
having to rewrite the packed refs file excluding the ref being deleted.
This check has to live outside of the conditional.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change calls to die(..., strerror(errno)) to use the new die_errno().
In the process, also make slight style adjustments: at least state
_something_ about the function that failed (instead of just printing
the pathname), and put paths in single quotes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is some preparation work for the following patches that are using
the "refs/replace/" ref namespace.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/unlink-err:
print unlink(2) errno in copy_or_link_directory
replace direct calls to unlink(2) with unlink_or_warn
Introduce an unlink(2) wrapper which gives warning if unlink failed
One of the ways that locking might fail is that there is a
DF conflict between two refs (e.g., you want to lock
"foo/bar" but "foo" already exists). In this case, we return
an error, but there is no way for the caller to know the
specific problem.
This patch sets errno to ENOTDIR, which is the most sensible
code. It's what we would see if the refs were stored purely
in the filesystem (but these days we must check the
namespace manually due to packed refs).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation to be used when the ref object is not available
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is asking for trouble since '\' is a directory separator in
Windows and thus may produce unpredictable results.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helps to notice when something's going wrong, especially on
systems which lock open files.
I used the following criteria when selecting the code for replacement:
- it was already printing a warning for the unlink failures
- it is in a function which already printing something or is
called from such a function
- it is in a static function, returning void and the function is only
called from a builtin main function (cmd_)
- it is in a function which handles emergency exit (signal handlers)
- it is in a function which is obvously cleaning up the lockfiles
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
