This patch introduces a modified Damerau-Levenshtein algorithm into
Git's code base, and uses it with the following penalties to show some
similar commands when an unknown command was encountered:
swap = 0, insertion = 1, substitution = 2, deletion = 4
A typical output would now look like this:
$ git sm
git: 'sm' is not a git-command. See 'git --help'.
Did you mean one of these?
am
rm
The cut-off is at similarity rating 6, which was empirically determined
to give sensible results.
As a convenience, if there is only one candidate, Git continues under
the assumption that the user mistyped it. Example:
$ git reabse
WARNING: You called a Git program named 'reabse', which does
not exist.
Continuing under the assumption that you meant 'rebase'
[...]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move most of the of code from builtin-merge-recursive.c to a new file
merge-recursive.c and introduce merge_recursive_setup() in there so that
builtin-merge-recursive and other builtins call it.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
gitattributes: -crlf is not binary
git-apply: Loosen "match_beginning" logic
Fix example in git-name-rev documentation
shell: do not play duplicated definition games to shrink the executable
Fix use of hardlinks in "make install"
pack-objects: Allow missing base objects when creating thin packs
Playing with linker games to shrink git-shell did not go well with various
other platforms and compilers.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code failed to filter-out git-add properly on platforms were $X is
not empty (ATM there is only one such a platform).
Than it tried to create a hardlink to the file ($execdir/git-add) it just
removed (because git-add is first in the BUILT_INS), so ln failed (but
because stderr was redirected into /dev/null the error was never seen), and
the whole install ended up using "ln -s" instead.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mv/merge-custom:
t7606: fix custom merge test
Fix "git-merge -s bogo" help text
Update .gitignore to ignore git-help
Builtin git-help.
builtin-help: always load_command_list() in cmd_help()
Add a second testcase for handling invalid strategies in git-merge
Add a new test for using a custom merge strategy
builtin-merge: allow using a custom strategy
builtin-help: make some internal functions available to other builtins
Conflicts:
help.c
We make hardlinks from "git" to "git-<cmd>" built-ins and have been
careful to avoid cross-device links when linking "git-<cmd>" to
gitexecdir.
However, we were not prepared to deal with a build directory that is
incapable of making hard links within itself. This patch corrects it.
Instead of temporarily linking "git" to gitexecdir, directly link "git-
add", falling back to "cp". Try hardlinking that as "git-<cmd>", falling
back to symlinks or "cp" on error.
While at it, avoid 100+ error messages from hardlink failures when we are
going to fall back to symlinks or "cp" by redirecting the standard error
to /dev/null.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit daa0cc9a92.
It was a stupid idea to do this; when run as a log-in shell,
it is spawned with argv[0] set to "-git-shell", so the usual
name-based dispatch would not work to begin with.
/etc/passwd shell field must be something execable, you can't enter
"/usr/bin/git shell" there. git-shell must be present as a separate
executable, or it is useless.
Signed-off-by: Tommi Virtanen <tv@eagain.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 81cc66a, customization has been added to Makefile for supporting
HP-UX, but git commit is still problematic. This should fix the issue.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Acked-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This trivially makes "git-shell" a built-in. It makes the executable even
fatter, though.
And MinGW removed git-shell only because of the funny dependencies; there
is no reason to do so anymore.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tested-on-MinGW-by: Johannes Sixt <johannes.sixt@telecom.at>
* rs/imap:
Documentation: Improve documentation for git-imap-send(1)
imap-send.c: more style fixes
imap-send.c: style fixes
git-imap-send: Support SSL
git-imap-send: Allow the program to be run from subdirectories of a git tree
Playing with linker games to shrink git-shell did not go well with various
other platforms and compilers.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms do not have st_blocks member in "struct stat"; mingw
already emulates it by rounding it up to closest 512-byte blocks (even
though it could overcount when a file has holes).
The reason to use the member is only to figure out how many kilobytes the
files occupy on-disk, so give a helper function in git-compat-util.h to
compute this value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Johannes Sixt <johannes.sixt@telecom.at>
Current Makefile does not allow config.mak to override CC_LD_DYNPATH; it
only lets it affect indirectly via NO_R_TO_GCC_LINKER.
If the command line, config.mak or config.mak.autogen wants to set
CC_LD_DYNPATH differently, we should just allow it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On platforms with $X, make removes any leftover scripts 'a' from
earlier builds if a new binary 'a.exe' is now built. However, on
cygwin 1.7.0, 'git' and 'git.exe' now consistently name the same file.
Test for file equality before attempting a remove, in order to avoid
nuking just-built binaries.
Signed-off-by: Eric Blake <ebb9@byu.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a make target which can be used to try to execute certain shell
constructs which are required for compiling and running git.
This patch provides a test for the $() notation for command substition
which is used in the Makefile and extensively in the git scripts.
The make target is named in such a way as to be a hint to the user that
SHELL_PATH should be set to an appropriate shell. If the shell command
fails, the user should receive a message similar to the following:
make: *** [please_set_SHELL_PATH_to_a_more_modern_shell] Error 2
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch splits out git-help's functions to builtin-help.c and leaves
only functions used by other builtins in help.c.
First this removes git-help's functions from libgit which are not
interesting for other builtins, second this makes 'git help help' work
again.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make load_command_list() capable of filtering for a given prefix and
loading into a pair of "struct cmdnames" supplied by the caller.
Make the static add_cmdname(), exclude_cmds() and is_in_cmdlist()
functions non-static.
Make list_commands() accept a custom title, and work from a pair of
"struct cmdnames" supplied by the caller.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an earlier commit c70a8d9 (Makefile: Do not install a copy of 'git' in
$(gitexecdir), 2008-07-21), we tried to avoid installing two git, one in
/usr/bin/git and the other in /usr/libexec/git-core/git. It mistakenly
removed the only copy of git when gitexecdir and bindir are set to the
same directory, i.e. the traditional layout.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a follow-up patch to 49fa65a (Allow the built-in exec path to be
relative to the command invocation path, 2008-07-23). Without specific
gitexecdir passed from the command line, git-gui's build procedure would
try to figure out the value for it by running an installed git.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow SSL to be used when a imaps:// URL is used for the host name.
Also, automatically use TLS when not using imaps:// by using the IMAP
STARTTLS command, if the server supports it.
Tested with Courier and Gimap IMAP servers.
Signed-off-by: Robert Shearman <robertshearman@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If GIT_EXEC_PATH (the macro that is defined in the Makefile) is relative,
it is interpreted relative to the command's invocation path, which usually
is $(bindir).
The Makefile rules were written with the assumption that $(gitexecdir) is
an absolute path. We introduce a separate variable that names the
(absolute) installation directory.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$(gitexecdir) (as defined in the Makefile) has gained another path
component, but the relative paths in the MINGW section of the Makefile,
which are interpreted relative to it, do not account for it.
Instead of adding another ../ in front of the path, we change the code that
constructs the absolute paths to do it relative to the command's directory,
which is essentially $(bindir). We do it this way because we will also
allow a relative $(gitexecdir) later.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The install target needs to check whether the user has opted to make
$(gitexecdir) equal to $(bindir). It did so by a straight string
comparison. Since we are going to allow a relative $(gitexecdir), we have
to normalize paths before comparison, which we do with $(cd there && pwd).
The normalized paths are stored in shell variables. These we can now
reuse in the subsequent install statements, which conveniently shortens
the lines a bit.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is already a copy in $(bindir). A subsequent patch will enable git
to derive the exec-path from its invocation path. If git is invoked
recursively, the first invocation puts the exec-path into PATH, so that
the recursive invocation would find the instance in the exec-path. This
second instance would again try to derive an exec-path from its invocation
path, but would base its result on the wrong "bindir".
We do install the copy of git first, but remove it later, so that we can
use it as the source of the hardlinks for the builtins.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
launch_editor() is declared in strbuf.h but defined in builtin-tag.c.
This patch moves launch_editor() into a new source file editor.c,
but keeps the declaration in strbuf.h.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile records paths to a few programs in GIT-BUILD-OPTIONS file. These
paths need to be quoted twice: once to protect specials from the shell
that runs the generated GIT-BUILD-OPTIONS file, and again to protect them
(and the first level of quoting itself) from the shell that runs the
"echo" inside the Makefile.
You can test this by trying:
$ ln -s /bin/tar "$HOME/Tes' program/tar"
$ make TAR="$HOME/Tes' program/tar" test
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name path_list was correct for the first usage of that data structure,
but it really is a general-purpose string list.
$ perl -i -pe 's/path-list/string-list/g' $(git grep -l path-list)
$ perl -i -pe 's/path_list/string_list/g' $(git grep -l path_list)
$ git mv path-list.h string-list.h
$ git mv path-list.c string-list.c
$ perl -i -pe 's/has_path/has_string/g' $(git grep -l has_path)
$ perl -i -pe 's/path/string/g' string-list.[ch]
$ git mv Documentation/technical/api-path-list.txt \
Documentation/technical/api-string-list.txt
$ perl -i -pe 's/strdup_paths/strdup_strings/g' $(git grep -l strdup_paths)
... and then fix all users of string-list to access the member "string"
instead of "path".
Documentation/technical/api-string-list.txt needed some rewrapping, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This in the short term will break on platforms that use compat implemenations
that call outside compat layer, but that is exactly what we want. To give
incentive to fix things for people who are affected and more importantly have
environment to test their fixes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds only the minimum necessary to keep git pull/merge's diffstat from
wrapping. Notably absent is support for the K (erase) operation, and support
for POSIX write.
Signed-off-by: Peter Harris <git@peter.is-a-geek.org>
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 5b8e6f85 introduced stubs for three functions that make no sense
for git-shell. But those stubs defined libgit.a functions a second time
so that a linker can complain.
Now git-shell is only linked to a subset of libgit.a.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mv/dashless:
make remove-dashes: apply to scripts and programs as well, not just to builtins
git-bisect: use dash-less form on git bisect log
t1007-hash-object.sh: use quotes for the test description
t0001-init.sh: change confusing directory name
* mv/merge-in-c:
reduce_heads(): protect from duplicate input
reduce_heads(): thinkofix
Add a new test for git-merge-resolve
t6021: add a new test for git-merge-resolve
Teach merge.log to "git-merge" again
Build in merge
Fix t7601-merge-pull-config.sh on AIX
git-commit-tree: make it usable from other builtins
Add new test case to ensure git-merge prepends the custom merge message
Add new test case to ensure git-merge reduces octopus parents when possible
Introduce reduce_heads()
Introduce get_merge_bases_many()
Add new test to ensure git-merge handles more than 25 refs.
Introduce get_octopus_merge_bases() in commit.c
git-fmt-merge-msg: make it usable from other builtins
Move read_cache_unmerged() to read-cache.c
Add new test to ensure git-merge handles pull.twohead and pull.octopus
Move parse-options's skip_prefix() to git-compat-util.h
Move commit_list_count() to commit.c
Move split_cmdline() to alias.c
Conflicts:
Makefile
parse-options.c
All programs and scripts are now moved outside PATH, so it's a good idea
not to use the dashed forms for them, either.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch moves rerere()-related functions into a newly created
rerere.c file.
The setup_rerere() function is needed by both rerere() and cmd_rerere(),
so this function is moved to rerere.c and declared non-static (and "extern")
in newly created rerere.h file.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* dr/ceiling:
Eliminate an unnecessary chdir("..")
Add support for GIT_CEILING_DIRECTORIES
Fold test-absolute-path into test-path-utils
Implement normalize_absolute_path
Conflicts:
cache.h
setup.c
As pointed out by Linus, this strategy tries to take the best merge
base, but 'recursive' just does it better. If one needs something more
than 'resolve' then he/she should really use 'recursive' and not
'stupid'.
Cf. Message-ID: <alpine.LFD.1.10.0807030947360.18105@woody.linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* j6t/mingw: (38 commits)
compat/pread.c: Add a forward declaration to fix a warning
Windows: Fix ntohl() related warnings about printf formatting
Windows: TMP and TEMP environment variables specify a temporary directory.
Windows: Make 'git help -a' work.
Windows: Work around an oddity when a pipe with no reader is written to.
Windows: Make the pager work.
When installing, be prepared that template_dir may be relative.
Windows: Use a relative default template_dir and ETC_GITCONFIG
Windows: Compute the fallback for exec_path from the program invocation.
Turn builtin_exec_path into a function.
Windows: Use a customized struct stat that also has the st_blocks member.
Windows: Add a custom implementation for utime().
Windows: Add a new lstat and fstat implementation based on Win32 API.
Windows: Implement a custom spawnve().
Windows: Implement wrappers for gethostbyname(), socket(), and connect().
Windows: Work around incompatible sort and find.
Windows: Implement asynchronous functions as threads.
Windows: Disambiguate DOS style paths from SSH URLs.
Windows: A rudimentary poll() emulation.
Windows: Implement start_command().
...
A lot of modules that have nothing to do with git-shell functionality
were linked in, bloating git-shell more than 8 times.
This patch cuts off redundant dependencies by:
1. providing stubs for three functions that make no sense for git-shell;
2. moving quote_path_fully from environment.c to quote.c to make the
later self sufficient;
3. moving make_absolute_path into a new separate file.
The following numbers have been received with the default optimization
settings on master using GCC 4.1.2:
Before:
text data bss dec hex filename
143915 1348 93168 238431 3a35f git-shell
After:
text data bss dec hex filename
17670 788 8232 26690 6842 git-shell
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the Makefile in the template/ subdirectory is only used to install
the templates, we do not simply pass down the setting of template_dir
when it is relative, but construct the intended destination in a new
variable: A relative template_dir is relative to gitexecdir.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
With this definition the templates and system config file will be found
irrespective of the installation location.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
* jh/clone-packed-refs:
Teach "git clone" to pack refs
Prepare testsuite for a "git clone" that packs refs
Move pack_refs() and friends into libgit
Incorporate fetched packs in future object traversal
Otherwise remote executions directly over ssh won't find them as they used
to. --upload-pack and --receive-pack options _could_ be used on the
client side, but things should keep working out-of-box for older clients.
Later versions of clients (fetch-pack and send-pack) probably could start
asking for these programs with dashless form, but that is a different
topic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before we can successfully parse a builtin command from the program name
we must strip off unneeded parts, that is, the file extension.
Furthermore, we must take Windows style path names into account when we
parse the program name.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this change GIT can be compiled and linked using MinGW. Builtins
that only read the repository such as the log family and grep already
work.
Simple stubs are provided for a number of functions that the Windows C
runtime does not offer. They will be completed in later patches.
However, a fix for the snprintf/vsnprintf replacement is applied here
to avoid buffer overflows.
Dmitry Kakurin pointed out that access(..., X_OK) would always fails on
Vista and suggested the -D__USE_MINGW_ACCESS workaround.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
These programs depend on difficult to emulate POSIX functionality.
On Windows, we won't compile them.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
This makes it possible to install html documents from the top level
directory. Previously such target was only in Documentation/Makefile.
Signed-off-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves pack_refs() and underlying functionality into the library,
to make pack-refs functionality easily available to all git programs.
Most of builtin-pack-refs.c has been moved verbatim into a new file
pack-refs.c that is compiled into libgit.a. A corresponding header
file, pack-refs.h, has also been added, declaring pack_refs() and
the #defines associated with the flags parameter to pack_refs().
This patch introduces no other changes in functionality.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier series to rename documentation pages around did not update this
target and left check-docs broken. This should fix it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds support to compile and run git on 12 additional platforms.
The platforms are based on UNIX Systems Labs (USL)/Novell/SYS V code base.
The most common are Novell UnixWare 2.X.X, SCO UnixWare 7.X.X,
OpenServer 5.0.X, OpenServer 6.0.X, and SCO pre OSR 5 platforms.
Looking at the the various platform headers, I find:
#if defined(_KERNEL) || !defined(_POSIX_SOURCE) \
&& !defined(_POSIX_C_SOURCE) && !defined(_XOPEN_SOURCE)
which hides u_short and other typedefs that other header files on these
platforms depend on. WIth _XOPEN_SOURCE defined, sources that include
system header files that depend on the typedefs such as u_short cannot be
compiled on these platforms.
__USLC__ indicates UNIX System Labs Corperation (USLC), or a Novell-derived
compiler and/or some SysV based OS's.
__M_UNIX indicates XENIX/SCO UNIX/OpenServer 5.0.7 and prior releases
of the SCO OS's. It is used just like Apple and BSD, both of these
shouldn't have _XOPEN_SOURCE defined.
This is with suggestions and modifications from
Daniel Barkalow, Junio C Hamano, Thomas Harning, and Jeremy Maitin-Shepard.
Signed-off-by: Boyd Lynn Gerber <gerberb@zenez.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/diff-no-no-index:
git diff --no-index: default to page like other diff frontends
git-diff: allow --no-index semantics a bit more
"git diff": do not ignore index without --no-index
diff-files: do not play --no-index games
tests: do not use implicit "git diff --no-index"
* db/clone-in-c:
Add test for cloning with "--reference" repo being a subset of source repo
Add a test for another combination of --reference
Test that --reference actually suppresses fetching referenced objects
clone: fall back to copying if hardlinking fails
builtin-clone.c: Need to closedir() in copy_or_link_directory()
builtin-clone: fix initial checkout
Build in clone
Provide API access to init_db()
Add a function to set a non-default work tree
Allow for having for_each_ref() list extra refs
Have a constant extern refspec for "--tags"
Add a library function to add an alternate to the alternates file
Add a lockfile function to append to a file
Mark the list of refs to fetch as const
Conflicts:
cache.h
t/t5700-clone-reference.sh
Even if "foo" and/or "bar" does not exist in index, "git diff foo bar"
should not change behaviour drastically from "git diff foo bar baz" or
"git diff foo". A feature that "sometimes works and is handy" is an
unreliable cute hack.
"git diff foo bar" outside a git repository continues to work as a more
colourful alternative to "diff -u" as before.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
normalize_absolute_path removes several oddities form absolute paths,
giving nice clean paths like "/dir/sub1/sub2". Also add a test case
for this utility, based on a new test program (in the style of test-sha1).
Signed-off-by: David Reiss <dreiss@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
NO_MKDTEMP is required to build, FREAD_READS_DIRECTORIES and the definition
of _LARGE_FILES fix test suite failures and INTERNAL_QSORT is required for
adequate performance.
Tested on AIX v5.3 Maintenance Level 06
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Tested-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/case-insensitive:
Make git-add behave more sensibly in a case-insensitive environment
When adding files to the index, add support for case-independent matches
Make unpack-tree update removed files before any updated files
Make branch merging aware of underlying case-insensitive filsystems
Add 'core.ignorecase' option
Make hash_name_lookup able to do case-independent lookups
Make "index_name_exists()" return the cache_entry it found
Move name hashing functions into a file of its own
Make unpack_trees_options bit flags actual bitfields
This new API allows the commit history to be displayed as a text-based
graphical representation.
Signed-off-by: Adam Simpkins <adam@adamsimpkins.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thanks to Johannes Schindelin for various comments and improvements,
including supporting cloning full bundles.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when looking for a packed object from the pack idx, a
simple binary search is used.
A conventional binary search loop looks like this:
unsigned lo, hi;
do {
unsigned mi = (lo + hi) / 2;
int cmp = "entry pointed at by mi" minus "target";
if (!cmp)
return mi; "mi is the wanted one"
if (cmp > 0)
hi = mi; "mi is larger than target"
else
lo = mi+1; "mi is smaller than target"
} while (lo < hi);
"did not find what we wanted"
The invariants are:
- When entering the loop, 'lo' points at a slot that is never
above the target (it could be at the target), 'hi' points at
a slot that is guaranteed to be above the target (it can
never be at the target).
- We find a point 'mi' between 'lo' and 'hi' ('mi' could be
the same as 'lo', but never can be as high as 'hi'), and
check if 'mi' hits the target. There are three cases:
- if it is a hit, we have found what we are looking for;
- if it is strictly higher than the target, we set it to
'hi', and repeat the search.
- if it is strictly lower than the target, we update 'lo'
to one slot after it, because we allow 'lo' to be at the
target and 'mi' is known to be below the target.
If the loop exits, there is no matching entry.
When choosing 'mi', we do not have to take the "middle" but
anywhere in between 'lo' and 'hi', as long as lo <= mi < hi is
satisfied. When we somehow know that the distance between the
target and 'lo' is much shorter than the target and 'hi', we
could pick 'mi' that is much closer to 'lo' than (hi+lo)/2,
which a conventional binary search would pick.
This patch takes advantage of the fact that the SHA-1 is a good
hash function, and as long as there are enough entries in the
table, we can expect uniform distribution. An entry that begins
with for example "deadbeef..." is much likely to appear much
later than in the midway of a reasonably populated table. In
fact, it can be expected to be near 87% (222/256) from the top
of the table.
This is a work-in-progress and has switches to allow easier
experiments and debugging. Exporting GIT_USE_LOOKUP environment
variable enables this code.
On my admittedly memory starved machine, with a partial KDE
repository (3.0G pack with 95M idx):
$ GIT_USE_LOOKUP=t git log -800 --stat HEAD >/dev/null
3.93user 0.16system 0:04.09elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+55588minor)pagefaults 0swaps
Without the patch, the numbers are:
$ git log -800 --stat HEAD >/dev/null
4.00user 0.15system 0:04.17elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+60258minor)pagefaults 0swaps
In the same repository:
$ GIT_USE_LOOKUP=t git log -2000 HEAD >/dev/null
0.12user 0.00system 0:00.12elapsed 97%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+4241minor)pagefaults 0swaps
Without the patch, the numbers are:
$ git log -2000 HEAD >/dev/null
0.05user 0.01system 0:00.07elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+8506minor)pagefaults 0swaps
There isn't much time difference, but the number of minor faults
seems to show that we are touching much smaller number of pages,
which is expected.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's really totally separate functionality, and if we want to start
doing case-insensitive hash lookups, I'd rather do it when it's
separated out.
It also renames "remove_index_entry()" to "remove_name_hash()", because
that really describes the thing better. It doesn't actually remove the
index entry, that's done by "remove_index_entry_at()", which is something
very different, despite the similarity in names.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The earlier one did not correctly propagate GITWEB_CONFIG_SYSTEM from
Makefile to generated gitweb.cgi script.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
From a distribution point of view, configuration files for applications
should reside in /etc/. On the other hand it's convenient for multiple
instances of gitweb (e.g. virtual web servers on a single machine) to have
a per-instance configuration file, just as gitweb currently supports
through the file gitweb_config.perl next to the cgi.
To support both at runtime, this commit introduces GITWEB_CONFIG_SYSTEM as
a system-wide configuration file which will be used as a fallback if the
config file sprecified throug GITWEB_CONFIG does not exist.
See also
http://bugs.debian.org/450592
Signed-off-by: Gerrit Pape <pape@smarden.org>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On some systems, 'sh' isn't very friendly. In particular,
t7003 fails on Solaris because it doesn't understand $().
Instead, use the specified SHELL_PATH to run shell code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we just chose whether to allow external grep
based on the __unix__ define. However, there are systems
which define this macro but which have an inferior group
(e.g., one that does not support all options used by t7002).
This allows users to accept the potential speed penalty to
get a more consistent grep experience (and to pass the
testsuite).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With flattened one-line-per-item list that is sorted, hopefully we will
have less merge conflicts when various topics are merged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It used to make sense back when nothing but diff-files, diff-index and
friends depended on diffcore infrastructure, but pretty much everything
depends on revision infrastructure which in turn depends on DIFF_OBJS.
There is no reason to treat them any differently in the Makefile.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/remote:
"remote update": print remote name being fetched from
builtin remote rm: remove symbolic refs, too
remote: fix "update [group...]"
remote show: Clean up connection correctly if object fetch wasn't done
builtin-remote: prune remotes correctly that were added with --mirror
Make git-remote a builtin
Test "git remote show" and "git remote prune"
parseopt: add flag to stop on first non option
path-list: add functions to work with unsorted lists
Conflicts:
parse-options.c
Some systems (namely HPUX and Windows) return -1 when maxsize in snprintf()
and in vsnprintf() is reached. So replace snprintf() and vsnprintf()
functions with our own ones that return correct value upon overflow.
[jc: verified that review comments by J6t have been incorporated, and
tightened the check to verify the resulting buffer contents, suggested
by Wayne Davison]
Signed-off-by: Michal Rokos <michal.rokos@nextsoft.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does not allow changing the bit to a non-root user.
This fixes t1301-shared-repo.sh on the platform.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* np/verify-pack:
add storage size output to 'git verify-pack -v'
fix unimplemented packed_object_info_detail() features
make verify_one_pack() a bit less wrong wrt packed_git structure
factorize revindex code out of builtin-pack-objects.c
Conflicts:
Makefile
* mk/maint-parse-careful:
receive-pack: use strict mode for unpacking objects
index-pack: introduce checking mode
unpack-objects: prevent writing of inconsistent objects
unpack-object: cache for non written objects
add common fsck error printing function
builtin-fsck: move common object checking code to fsck.c
builtin-fsck: reports missing parent commits
Remove unused object-ref code
builtin-fsck: move away from object-refs to fsck_walk
add generic, type aware object chain walker
Conflicts:
Makefile
builtin-fsck.c
No functional change. This is needed to fix verify-pack in a later patch.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The top-level Makefile now creates a GIT-BUILD-OPTIONS file
which stores any options selected by the make process that
may be of use to further parts of the build process.
Specifically, we store the SHELL_PATH so that it can be used
by tests to construct shell scripts on the fly.
The format of the GIT-BUILD-OPTIONS file is Bourne shell,
and it is sourced by test-lib.sh; all tests can rely on just
having $SHELL_PATH correctly set in the environment.
The GIT-BUILD-OPTIONS file is written every time the
toplevel 'make' is invoked. Since the only users right now
are the test scripts, there's no drawback to updating its
timestamp. If something build-related depends on this, we
can do a trick similar to the one used by GIT-CFLAGS.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/checkout: (21 commits)
checkout: error out when index is unmerged even with -m
checkout: show progress when checkout takes long time while switching branches
Add merge-subtree back
checkout: updates to tracking report
builtin-checkout.c: Remove unused prefix arguments in switch_branches path
checkout: work from a subdirectory
checkout: tone down the "forked status" diagnostic messages
Clean up reporting differences on branch switch
builtin-checkout.c: fix possible usage segfault
checkout: notice when the switched branch is behind or forked
Build in checkout
Move code to clean up after a branch change to branch.c
Library function to check for unmerged index entries
Use diff -u instead of diff in t7201
Move create_branch into a library file
Build-in merge-recursive
Add "skip_unmerged" option to unpack_trees.
Discard "deleted" cache entries after using them to update the working tree
Send unpack-trees debugging output to stderr
Add flag to make unpack_trees() not print errors.
...
Conflicts:
Makefile
* ae/pack-autothread:
Revert "pack-objects: Print a message describing the number of threads for packing"
pack-objects: Print a message describing the number of threads for packing
pack-objects: Add runtime detection of online CPU's
The requirements are:
* it may not crash on NULL pointers
* a callback function is needed, as index-pack/unpack-objects
need to do different things
* the type information is needed to check the expected <-> real type
and print better error messages
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This converts git_config_alias to the public alias_lookup
function. Because of the nature of our config parser, we
still have to rely on setting static data. However, that
interface is wrapped so that you can just say
value = alias_lookup(key);
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Cygwin we have to use git-archive.exe as the target, otherwise
running 'make dist' does not compile git-archive in the current
directory. That may cause 'make dist' to fail on a clean source
tree that has never been built before.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Packing objects can be done in parallell nowadays, but it's
only done if the config option pack.threads is set to a value
above 1. Because of that, the code-path used is often not the
most optimal one.
This patch adds a routine to detect the number of online CPU's
at runtime (online_cpus()). When pack.threads (or --threads=) is
given a value of 0, the number of threads is set to the number of
online CPU's. This feature is also documented.
As per Nicolas Pitre's recommendations, the default is still to
run pack-objects single-threaded unless explicitly activated,
either by configuration or by command line parameter.
The routine online_cpus() is a rework of "numcpus.c", written by
one Philip Willoughby <pgw99@doc.ic.ac.uk>. numcpus.c is in the
public domain and can presently be downloaded from
http://csgsoft.doc.ic.ac.uk/numcpus/
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier commit e1b3a2c (Build-in merge-recursive) made the
subtree merge strategy backend unavailable. This resurrects
it.
A new test t6029 currently only tests the strategy is available,
but it should be enhanced to check the real "subtree" case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves low-level merge functions out of merge-recursive.c and
places them in a new separate file, ll-merge.c
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only differences in behavior should be:
- git checkout -m with non-trivial merging won't print out
merge-recursive messages (see the change in t7201-co.sh)
- git checkout -- paths... will give a sensible error message if
HEAD is invalid as a commit.
- some intermediate states which were written to disk in the shell
version (in particular, index states) are only kept in memory in
this version, and therefore these can no longer be revealed by
later write operations becoming impossible.
- when we change branches, we discard MERGE_MSG, SQUASH_MSG, and
rr-cache/MERGE_RR, like reset always has.
I'm not 100% sure I got the merge recursive setup exactly right; the
base for a non-trivial merge in the shell code doesn't seem
theoretically justified to me, but I tried to match it anyway, and the
tests all pass this way.
Other than these items, the results should be identical to the shell
version, so far as I can tell.
[jc: squashed lock-file fix from Dscho in]
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some systems do not fail as expected when fread et al. are called on
a directory stream. Replace fopen on such systems which will fail
when the supplied path is a directory.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can also create branches, in exactly the same way, with checkout -b.
This introduces branch.{c,h} library files for doing porcelain-level
operations on branches (such as creating them with their appropriate
default configuration).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
This makes write_tree_from_memory(), which writes the active cache as
a tree and returns the struct tree for it, available to other code. It
also makes available merge_trees(), which does the internal merge of
two trees with a known base, and merge_recursive(), which does the
recursive internal merge of two commits with a list of common
ancestors.
The first two of these will be used by checkout -m, and the third is
presumably useful in general, although the implementation of checkout
-m which entirely matches the behavior of the shell version does not
use it (since it ignores the difference of ancestry between the old
branch and the new branch).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
qsort in Windows 2000 (and various other C libraries) is a Quicksort
with the usual O(n^2) worst case. Unfortunately, sorting Git trees
seems to get very close to that worst case quite often:
$ /git/gitbad runstatus
# On branch master
qsort, nmemb = 30842
done, 237838087 comparisons.
This patch adds a simplified version of the merge sort that is glibc's
qsort(3). As a merge sort, this needs a temporary array equal in size
to the array that is to be sorted, but has a worst-case performance of
O(n log n).
The complexity that was removed is:
* Doing direct stores for word-size and -aligned data.
* Falling back to quicksort if the allocation required to perform the
merge sort would likely push the machine into swap.
Even with these simplifications, this seems to outperform the Windows
qsort(3) implementation, even in Windows XP (where it is "fixed" and
doesn't trigger O(n^2) complexity on trees).
[jes: moved into compat/qsort.c, as per Johannes Sixt's suggestion]
[bcd: removed gcc-ism, thanks to Edgar Toernig. renamed make variable
per Junio's comment.]
Signed-off-by: Brian Downing <bdowning@lavos.net>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git-help--browse" helper is to launch a browser of the user's choice
to view the HTML version of git documentation for a given command. It
used to take the name of a command, convert it to the path of the
documentation by prefixing the directory name and appending the
".html" suffix, and start the browser on the path.
This updates the division of labor between the caller in help.c and
git-help--browser helper. The helper is now responsible for launching
a browser of the user's choice on given URLs, and it is the caller's
responsibility to tell it the paths to documentation files.
This is in preparation to reuse the logic to choose user's preferred
browser in instaweb.
The helper had a provision for running it without any command name, in
which case it showed the toplevel "git(7)" documentation, but the
caller in help.c never makes such a call. The helper now exits with a
usage message when no path is given.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX.1-2001 has declaration of select(2) in <sys/select.h>, but
in the previous version of SUS, it was declared in <sys/time.h>
(which is already included in git-compat-util.h).
This introduces NO_SYS_SELECT_H macro in the Makefile to be set
on older systems, to skip inclusion of <sys/select.h> that does
not exist on them.
We could check _POSIX_VERSION with 200112L and do this
automatically, but earlier it was reported that the approach
does not work well on some vintage of HP-UX. Other systems may
get _POSIX_VERSION itself wrong. At least for now, this manual
configuration is safer.
Signed-off-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the specfile (export-subst) attribute was introduced, it added a
dependency from archive-{tar|zip}.c to builtin-archive.c. This broke the
support for archive-operations in libgit.a since builtin-archive.o doesn't
belong in libgit.a.
This patch moves the functions required by libgit.a from builtin-archive.c
to the new file archive.c (which becomes part of libgit.a).
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update configure.ac (and config.mak.in) by adding test for unsetenv
(NO_UNSETENV). Add comment about NO_UNSETENV to Makefile header, as
original commit 731043fd adding compat/unsetenv.c didn't do that.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rerere.enabled is _not_ on by default. The command is enabled if rr-cache
exists even when rerere.enabled is missing, and enabled or disabled by
explicitly setting the rerere.enabled variable.
This page should hold every information about the git ways to parse command
lines, and best practices to be used for scripting.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
git-instaweb relied on a pipe in a sed script, but this is not supported
by MacOS X sed when using BREs. git-instaweb relies on a working perl
in any case, and perl re are more consistent between platforms, so
replace sed invocation with an equivalent perl invocation.
Also, fix the documented -b "" to work without giving a spurious 'command
not found' error.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The convention for helper scripts has been
git-$TOOL--$HELPER. Since this is a "browse" helper for the
"help" tool, git-help--browse is a more sensible name.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command was removed from the builtin command list and there was no
way to invoke it, but the code was still there.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/help:
RPM spec: Adjust htmldir
git-help -w: do not require to be in git repository
git.spec.in: remove python_path
Documentation: rename git.texi to user-manual.texi
Add git-browse-help to .gitignore
git-help -i: show info documentation from matching version of git
git-help -i: invoke info with document and node name
Documentation: add gitman.info target
Documentation: describe -w/--web option to "git-help".
Use {web,instaweb,help}.browser config options.
git-help: add -w|--web option to display html man page in a browser.
Documentation: describe -i/--info option to "git-help"
git-help: add -i|--info option to display info page.
DESTDIR is supposed to be overridden on 'make install' after doing
'make'. Have the automatically generated perl/perl.mak not cache the
value of DESTDIR to support that for the perl/ subdirectory also.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/spht:
Use gitattributes to define per-path whitespace rule
core.whitespace: documentation updates.
builtin-apply: teach whitespace_rules
builtin-apply: rename "whitespace" variables and fix styles
core.whitespace: add test for diff whitespace error highlighting
git-diff: complain about >=8 consecutive spaces in initial indent
War on whitespace: first, a bit of retreat.
Conflicts:
cache.h
config.c
diff.c
Now when using "git help -w cmd", we will try to show the HTML man
page "git-cmd.html" in your prefered web browser.
To do that "help.c" code will call a new shell script
"git-browse-help".
This currently works only if the HTML versions of the man page
have been installed in $(htmldir) (typically "/usr/share/doc/git-doc"),
so new target to do that is added to "Documentation/Makefile".
The browser to use can be configured using the "web.browser"
config variable.
We try to open a new tab in an existing web browser, if possible.
The code in "git-browse-help" is heavily stolen from "git-mergetool"
by Theodore Y. Ts'o. Thanks.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepend $(prefix)/share/man to the MANPATH environment variable before
invoking 'man' from help.c:show_man_page(). There may be other git
documentation in the user's MANPATH but the user is asking a specific
instance of git about its own documentation, so we'd better show the
documentation for _that_ instance of git.
Signed-off-by: Sergei Organov <osv@javad.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apple ships a newer version of iconv with Leopard (Mac OS X 10.5/Darwin
9). Ensure that OLD_ICONV is not set on any version of Darwin in the
9.x series; this should be good for at least a couple of years, when
Darwin 10 comes out and we can invert the sense of the test to
specifically check for Darwin 7 or 8.
A more sophisticated and robust check is possible for those who use
autoconf, but not everybody does that.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `core.whitespace` configuration variable allows you to define what
`diff` and `apply` should consider whitespace errors for all paths in
the project (See gitlink:git-config[1]). This attribute gives you finer
control per path.
For example, if you have these in the .gitattributes:
frotz whitespace
nitfol -whitespace
xyzzy whitespace=-trailing
all types of whitespace problems known to git are noticed in path 'frotz'
(i.e. diff shows them in diff.whitespace color, and apply warns about
them), no whitespace problem is noticed in path 'nitfol', and the
default types of whitespace problems except "trailing whitespace" are
noticed for path 'xyzzy'. A project with mixed Python and C might want
to have:
*.c whitespace
*.py whitespace=-indent-with-non-tab
in its toplevel .gitattributes file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cygwin still has old definition for the iconv() second
parameter. This patch fixes the last warning on Cygwin.
This has been tested with Cygwin 1.5.24.
Signed-off-by: Pascal Obry <pascal@obry.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kh/commit: (33 commits)
git-commit --allow-empty
git-commit: Allow to amend a merge commit that does not change the tree
quote_path: fix collapsing of relative paths
Make git status usage say git status instead of git commit
Fix --signoff in builtin-commit differently.
git-commit: clean up die messages
Do not generate full commit log message if it is not going to be used
Remove git-status from list of scripts as it is builtin
Fix off-by-one error when truncating the diff out of the commit message.
builtin-commit.c: export GIT_INDEX_FILE for launch_editor as well.
Add a few more tests for git-commit
builtin-commit: Include the diff in the commit message when verbose.
builtin-commit: fix partial-commit support
Fix add_files_to_cache() to take pathspec, not user specified list of files
Export three helper functions from ls-files
builtin-commit: run commit-msg hook with correct message file
builtin-commit: do not color status output shown in the message template
file_exists(): dangling symlinks do exist
Replace "runstatus" with "status" in the tests
t7501-commit: Add test for git commit <file> with dirty index.
...
The install-sh script as shipped with automake requires a space between
the -m switch and its argument. Since this is also the regular way of
doing it with other install implementations this change inserts the
missing space in all makefiles.
Signed-off-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This program dumps (parts of) a git repository in the format that
fast-import understands.
For clarity's sake, it does not use the 'inline' method of specifying
blobs in the commits, but builds the blobs before building the commits.
Since signed tags' signatures will not necessarily be valid (think
transformations after the export, or excluding revisions, changing
the history), there are 4 modes to handle them: abort (default),
ignore, warn and strip. The latter just turns the tags into
unsigned ones.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The categorized list of commands in git(7) and the list of common
commands in "git help" output were maintained separately, which was
insane. This consolidates them to a single command-list.txt file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
8951d7c1f1 (Build in ls-remote) made
peek-remote as a synonym to ls-remote by enhancing the latter, but
at the same time actually _removed_ it, before we officially gave
removal notice. This was bad.
Resurrect it for v1.5.4.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Replace the word 'update-cache' by 'update-index' everywhere
cvsimport: fix usage of cvsimport.module
t7003-filter-branch: Fix test of a failing --msg-filter.
cvsimport: miscellaneous packed-ref fixes
cvsimport: use rev-parse to support packed refs
Add basic cvsimport tests
Now that git-status is builtin on Cygwin this compiles as
git-status.exe. We cannot continue to include git-status
as a Makefile target as it will never be built.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/send-pack: (24 commits)
send-pack: cluster ref status reporting
send-pack: fix "everything up-to-date" message
send-pack: tighten remote error reporting
make "find_ref_by_name" a public function
Fix warning about bitfield in struct ref
send-pack: assign remote errors to each ref
send-pack: check ref->status before updating tracking refs
send-pack: track errors for each ref
git-push: add documentation for the newly added --mirror mode
Add tests for git push'es mirror mode
Update the tracking references only if they were succesfully updated on remote
Add a test checking if send-pack updated local tracking branches correctly
git-push: plumb in --mirror mode
Teach send-pack a mirror mode
send-pack: segfault fix on forced push
Reteach builtin-ls-remote to understand remotes
send-pack: require --verbose to show update of tracking refs
receive-pack: don't mention successful updates
more terse push output
Build in ls-remote
...
* js/mingw-fallouts:
fetch-pack: Prepare for a side-band demultiplexer in a thread.
rehabilitate some t5302 tests on 32-bit off_t machines
Allow ETC_GITCONFIG to be a relative path.
Introduce git_etc_gitconfig() that encapsulates access of ETC_GITCONFIG.
Allow a relative builtin template directory.
Close files opened by lock_file() before unlinking.
builtin run_command: do not exit with -1.
Move #include <sys/select.h> and <sys/ioctl.h> to git-compat-util.h.
Use is_absolute_path() in sha1_file.c.
Skip t3902-quoted.sh if the file system does not support funny names.
t5302-pack-index: Skip tests of 64-bit offsets if necessary.
t7501-commit.sh: Not all seds understand option -i
t5300-pack-object.sh: Split the big verify-pack test into smaller parts.
This makes git commit a builtin and moves git-commit.sh to
contrib/examples. This also removes the git-runstatus
helper, which was mostly just a git-status.sh implementation detail.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Except that this fixes a longstanding corner case bug by
tightening the way underlying diff-index command is run, it is
functionally equivalent to the scripted version.
Signed-off-by: Thomas Harning Jr <harningt@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces git-clean.sh with builtin-clean.c, and moves
git-clean.sh to the examples.
This also introduces a change in behavior when removing directories
explicitly specified as a path. For example currently:
1. When dir has only untracked files, these two behave differently:
$ git clean -n dir
$ git clean -n dir/
the former says "Would not remove dir/", while the latter would say
"Would remove dir/untracked" for all paths under it, but not the
directory itself.
With -d, the former would stop refusing, however since the user
explicitly asked to remove the directory the -d is no longer required.
2. When there are more parameters:
$ git clean -n dir foo
$ git clean -n dir/ foo
both cases refuse to remove dir/ unless -d is specified. Once again
since both cases requested to remove dir the -d is no longer required.
Thanks to Johannes Schindelin for the conversion to using the
parse-options API.
Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is to prepare for gitk i18n effort that makes gitk not a single file
project anymore. We may use subproject to bind git.git and gitk.git more
loosely in the future, but we do not want to require everybody to have
subproject aware git to be able to pull from git.git yet.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Define NO_MKDTEMP for all variants of SunOS; Solaris 10 does not
have mkdtemp() and all the other versions our Makefile knows
about don't have it either.
NO_{SETENV,UNSETENV,C99_FORMAT,STRTOUMAX} definitions cannot be
unified across versions. Beginning with Solaris 10, the C-library
provides unsetenv(), setenv() and strtoumax(). Also 'z'/'t' formats
are supported. However, older versions of Solaris do not support
these.
Signed-off-by: Guido Ostkamp <git@ostkamp.fastmail.fm>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a subsequent patch the path to the system-wide config file will be
computed. This is a preparation for that change. It turns all accesses
of ETC_GITCONFIG into function calls. There is no change in behavior.
As a consequence, config.c is the only file that needs the definition of
ETC_GITCONFIG. Hence, -DETC_GITCONFIG is removed from the CFLAGS and a
special build rule for config.c is introduced. As a side-effect, changing
the defintion of ETC_GITCONFIG (e.g. in config.mak) does not trigger a
complete rebuild anymore.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-clean: honor core.excludesfile
Documentation: Fix man page breakage with DocBook XSL v1.72
git-remote.txt: fix typo
core-tutorial.txt: Fix argument mistake in an example.
replace reference to git-rm with git-reset in git-commit doc
Grammar fixes for gitattributes documentation
Don't allow fast-import tree delta chains to exceed maximum depth
revert/cherry-pick: allow starting from dirty work tree.
t/t3404: fix test for a bogus todo file.
Conflicts:
fast-import.c
* db/remote-builtin:
Reteach builtin-ls-remote to understand remotes
Build in ls-remote
Use built-in send-pack.
Build-in send-pack, with an API for other programs to call.
Build-in peek-remote, using transport infrastructure.
Miscellaneous const changes and utilities
Conflicts:
transport.c
A stale test-parse-options can break t0040 otherwise.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
From version 1.72 it will replace all dots in roff requests with U+2302
("house" character), and add escaping in output for all instances of dot
that are not in roff requests. This caused the ".ft" hack forcing
monospace font in listingblocks to end up as "\&.ft" and being visible
in the resulting man page.
The fix adds a DOCBOOK_XSL_172 build variable that will disable the
hack. To allow this variable to be defined in config.mak it also moves
build variable handling below the inclusion of config.mak.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Start preparing for 1.5.3.6
git-send-email: Change the prompt for the subject of the initial message.
SubmittingPatches: improve the 'Patch:' section of the checklist
instaweb: Minor cleanups and fixes for potential problems
stop t1400 hiding errors in tests
Makefile: add missing dependency on wt-status.h
refresh_index_quietly(): express "optional" nature of index writing better
Fix sed string regex escaping in module_name.
Avoid a few unportable, needlessly nested "...`...".
git-mailsplit: with maildirs not only process cur/, but also new/
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ZLIB_VERNUM isn't defined in some zlib versions, so this patch does a proper
linking test in autoconf to see whether deflateBound exists in zlib. Also,
setting NO_DEFLATE_BOUND will also work for folk not using autoconf.
Signed-off-by: David Symonds <dsymonds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This actually replaces peek-remote with ls-remote, since peek-remote
now handles everything. peek-remote remains an a second name for
ls-remote, although its help message now gives the "ls-remote" name.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The file commit.c got quite large, but it does not have to be: the
code concerning pretty printing is pretty well contained. In fact,
this commit just splits it off into pretty.c, leaving commit.c with
just 672 lines.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also marks some more things as const, as needed.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ph/parseopt: (24 commits)
gc: use parse_options
Fixed a command line option type for builtin-fsck.c
Make builtin-pack-refs.c use parse_options.
Make builtin-name-rev.c use parse_options.
Make builtin-count-objects.c use parse_options.
Make builtin-fsck.c use parse_options.
Update manpages to reflect new short and long option aliases
Make builtin-for-each-ref.c use parse-opts.
Make builtin-symbolic-ref.c use parse_options.
Make builtin-update-ref.c use parse_options
Make builtin-revert.c use parse_options.
Make builtin-describe.c use parse_options
Make builtin-branch.c use parse_options.
Make builtin-mv.c use parse-options
Make builtin-rm.c use parse_options.
Port builtin-add.c to use the new option parser.
parse-options: allow callbacks to take no arguments at all.
parse-options: Allow abbreviated options when unambiguous
Add shortcuts for very often used options.
parse-options: make some arguments optional, add callbacks.
...
Conflicts:
Makefile
builtin-add.c
* lt/rename:
Do the fuzzy rename detection limits with the exact renames removed
Fix ugly magic special case in exact rename detection
Do exact rename detection regardless of rename limits
Do linear-time/space rename logic for exact renames
copy vs rename detection: avoid unnecessary O(n*m) loops
Ref-count the filespecs used by diffcore
Split out "exact content match" phase of rename detection
Add 'diffcore.h' to LIB_H
This has been proposed for a few times without much reaction
from the list. Actually remove it to see who screams.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option parser takes argc, argv, an array of struct option
and a usage string. Each of the struct option elements in the array
describes a valid option, its type and a pointer to the location where the
value is written. The entry point is parse_options(), which scans through
the given argv, and matches each option there against the list of valid
options. During the scan, argv is rewritten to only contain the
non-option command line arguments and the number of these is returned.
Aggregation of single switches is allowed:
-rC0 is the same as -r -C 0 (supposing that -C wants an arg).
Every long option automatically support the option with the same name,
prefixed with 'no-' to unset the switch. It assumes that initial value for
strings are "NULL" and for integers is "0".
Long options are supported either with '=' or without:
--some-option=foo is the same as --some-option foo
Acked-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This implements a smarter rename detector for exact renames, which
rather than doing a pairwise comparison (time O(m*n)) will just hash the
files into a hash-table (size O(n+m)), and only do pairwise comparisons
to renames that have the same hash (time O(n+m) except for unrealistic
hash collissions, which we just cull aggressively).
Admittedly the exact rename case is not nearly as interesting as the
generic case, but it's an important case none-the-less. A similar general
approach should work for the generic case too, but even then you do need
to handle the exact renames/copies separately (to avoid the inevitable
added cost factor that comes from the _size_ of the file), so this is
worth doing.
In the expectation that we will indeed do the same hashing trick for the
general rename case, this code uses a generic hash-table implementation
that can be used for other things too. In fact, we might be able to
consolidate some of our existing hash tables with the new generic code
in hash.[ch].
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diffcore.h header file is included by more than just the internal
diff generation files, and needs to be part of the proper dependencies.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code generating perl/Makefile from Makefile.PL was causing trouble
because it didn't considered NO_PERL_MAKEMAKER and ran makemaker
unconditionally, rewriting perl.mak. Makemaker is FUBAR in ActiveState Perl,
and perl/Makefile has a replacement for it.
Besides, a changed Git.pm is *NOT* a reason to rebuild all the perl scripts,
so remove the dependency too.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/fetch-pack: (60 commits)
Define compat version of mkdtemp for systems lacking it
Avoid scary errors about tagged trees/blobs during git-fetch
fetch: if not fetching from default remote, ignore default merge
Support 'push --dry-run' for http transport
Support 'push --dry-run' for rsync transport
Fix 'push --all branch...' error handling
Fix compilation when NO_CURL is defined
Added a test for fetching remote tags when there is not tags.
Fix a crash in ls-remote when refspec expands into nothing
Remove duplicate ref matches in fetch
Restore default verbosity for http fetches.
fetch/push: readd rsync support
Introduce remove_dir_recursively()
bundle transport: fix an alloc_ref() call
Allow abbreviations in the first refspec to be merged
Prevent send-pack from segfaulting when a branch doesn't match
Cleanup unnecessary break in remote.c
Cleanup style nit of 'x == NULL' in remote.c
Fix memory leaks when disconnecting transport instances
Ensure builtin-fetch honors {fetch,transfer}.unpackLimit
...
Solaris 9 doesn't have mkdtemp() so we need to emulate it for the
rsync transport implementation. Since Solaris 9 is lacking this
function we can also reasonably assume it is not available on
Solaris 8 either. The new Makfile definition NO_MKDTEMP can be
set to enable the git compat version.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There's a number of tricky conflicts between master and
this topic right now due to the rewrite of builtin-push.
Junio must have handled these via rerere; I'd rather not
deal with them again so I'm pre-merging master into the
topic. Besides this topic somehow started to depend on
the strbuf series that was in next, but is now in master.
It no longer compiles on its own without the strbuf API.
* master: (184 commits)
Whip post 1.5.3.4 maintenance series into shape.
Minor usage update in setgitperms.perl
manual: use 'URL' instead of 'url'.
manual: add some markup.
manual: Fix example finding commits referencing given content.
Fix wording in push definition.
Fix some typos, punctuation, missing words, minor markup.
manual: Fix or remove em dashes.
Add a --dry-run option to git-push.
Add a --dry-run option to git-send-pack.
Fix in-place editing functions in convert.c
instaweb: support for Ruby's WEBrick server
instaweb: allow for use of auto-generated scripts
Add 'git-p4 commit' as an alias for 'git-p4 submit'
hg-to-git speedup through selectable repack intervals
git-svn: respect Subversion's [auth] section configuration values
gtksourceview2 support for gitview
fix contrib/hooks/post-receive-email hooks.recipients error message
Support cvs via git-shell
rebase -i: use diff plumbing instead of porcelain
...
Conflicts:
Makefile
builtin-push.c
rsh.c
There were a few places which did not cope well without curl. This
fixes all of them. We still need to link against the walker.o part
of the library as some parts of transport.o still call into there
even though we don't have HTTP support enabled.
If compiled with NO_CURL=1 we now get the following useful error
message:
$ git-fetch http://www.example.com/git
error: git was compiled without libcurl support.
fatal: Don't know how to fetch from http://www.example.com/git
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Before this patch the clean target has removed the
configure script that comes with Git tar file.
That made compiling Git for different architectures
inconvenient.
This patch excludes configure from the files to be
deleted by 'make clean' and adds new target 'distclean'
to preserve old functionality.
Signed-off-by: Mathias Megyei <mathias@mnet-mail.de>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The current makefile supports ctags but not cscope. Some people prefer
cscope (I do), so this patch adds a cscope target.
I've also added cscope* to the .gitignore file. For some reason tags
and TAGS weren't in there either so I've added them too.
Signed-off-by: Kristof Provost <Kristof@provost-engineering.be>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
convert-objects was needed to convert from an old-style repository,
which hashed the compressed contents and used a different date format.
Such repositories are presumably no longer common and, if such
conversions are necessary, should be done by writing a frontend for
git-fast-import.
Linus, the original author, is OK with moving it to contrib.
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Do not over-quote the -f envelopesender value.
unexpected Make output (e.g. from --debug) causes build failure
Fixed minor typo in t/t9001-send-email.sh test command line.
Without this, the extra output produced e.g., by "make --debug"
would go into $INSTLIBDIR and then cause the sed command to fail.
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Any changes to transport.h probably will require rebuilding a
number of object files so we should make sure it is included
in our set of headers.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thanks to Johannes Schindelin for review and fixes, and Julian
Phillips for the original C translation.
This changes a few small bits of behavior:
branch.<name>.merge is parsed as if it were the lhs of a fetch
refspec, and does not have to exactly match the actual lhs of a
refspec, so long as it is a valid abbreviation for the same ref.
branch.<name>.merge is no longer ignored if the remote is configured
with a branches/* file. Neither behavior is useful, because there can
only be one ref that gets fetched, but this is more consistant.
Also, fetch prints different information to standard out.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The transport specific stuff was moved into libgit.a, and the
bundle specific stuff will not be left behind.
This is a big code move, with one exception: the function
unbundle() no longer outputs the list of refs. You have to call
list_bundle_refs() yourself for that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves the code to call push backends into a library that can be
extended to make matching fetch and push decisions based on the URL it
gets, and which could be changed to have built-in implementations
instead of calling external programs.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This turns the extern functions to be provided by the backend into a
struct of pointers, renames the functions to be more
namespace-friendly, and updates http-fetch to this interface. It
removes the unused include from http-push.c. It makes git-http-fetch a
builtin (with the implementation a separate file, accessible
directly).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Removes the commit-walkers that are no longer useful, as well as
library code that was only used by ssh-fetch/push.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cr/reset:
Simplify cache API
An additional test for "git-reset -- path"
Make "git reset" a builtin.
Move make_cache_entry() from merge-recursive.c into read-cache.c
Add tests for documented features of "git reset".
This replaces the script "git-reset.sh" with "builtin-reset.c".
A few git commands used in the script are called from the builtin also:
"ls-files" to check for unmerged files, "read-tree" for resetting
the index file in "mixed" and "hard" resets, and "update-index" to
refresh at the end in the "mixed" reset and also for the option that
gets selected paths into the index.
The reset option with paths was implemented by Johannes Schindelin.
Since the option that gets selected paths into the index is not
a "reset" like the others because it does not change the HEAD at all,
now the command is showing a warning when the "--mixed" option
is supplied for that purpose.
The following table shows the behaviour of "git reset" for
the different supported options, where X means "changing"
the HEAD, index or working tree:
reset: --soft --mixed --hard -- <paths>
HEAD X X X -
index - X X X
files - - X -
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/archive:
archive - leakfix for format_subst()
Define NO_MEMMEM on Darwin as it lacks the function
archive: rename attribute specfile to export-subst
archive: specfile syntax change: "$Format:%PLCHLDR$" instead of just "%PLCHLDR" (take 2)
add memmem()
Remove unused function convert_sha1_file()
archive: specfile support (--pretty=format: in archive files)
Export format_commit_message()
memmem() is a nice GNU extension for searching a length limited string
in another one.
This compat version is based on the version found in glibc 2.2 (GPL 2);
I only removed the optimization of checking the first char by hand, and
generally tried to keep the code simple. We can add it back if memcmp
shows up high in a profile, but for now I prefer to keep it (almost
trivially) simple.
Since I don't really know which platforms beside those with a glibc
have their own memmem(), I used a heuristic: if NO_STRCASESTR is set,
then NO_MEMMEM is set, too.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
this is still rough, hence it is disabled by default. You need to compile
with "make THREADED_DELTA_SEARCH=1 ..." at the moment.
Threading is done on different portions of the object list to be
deltified. This is currently done by spliting the list into n parts and
then a thread is spawned for each of them. A better method would consist
of spliting the list into more smaller parts and have the n threads
pick the next part available.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cr/tag:
Teach "git stripspace" the --strip-comments option
Make verify-tag a builtin.
builtin-tag.c: Fix two memory leaks and minor notation changes.
launch_editor(): Heed GIT_EDITOR and core.editor settings
Make git tag a builtin.
These patches use docbook2x in order to create an info version of the
git user manual. No existing Makefile targets (including "all") are
touched, so you need to explicitly say
make info
sudo make install-info
to get git.info created and installed. If the info target directory
does not already contain a "dir" file, no directory entry is created.
This facilitates $(DESTDIR)-based installations. The same could be
achieved with
sudo make INSTALL_INFO=: install-info
explicitly.
perl is used for patching up sub-par file and directory information in
the Texinfo file. It would be cleaner to place the respective info
straight into user-manual.txt or the conversion configurations, but I
find myself unable to find out how to do this with Asciidoc/Texinfo.
Signed-off-by: David Kastrup <dak@gnu.org>
This patch adds convenience functions to work with absolute paths.
The function is_absolute_path() should help the efforts to integrate
the MinGW fork.
Note that make_absolute_path() returns a pointer to a static buffer.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce new makefile variable lib to hold the name of the lib
directory ("lib" by default). Also introduce a switch for configure
to specify this name with --with-lib=ARG. This is useful for systems
that use a different name than "lib" (like "lib64" on some 64 bit
Linux architectures).
Signed-off-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some systems do not provide zlib development headers and libraries in
default search path of the compiler. For these systems we should allow
specifying the location by --with-zlib=PATH or by setting ZLIB_PATH in
the makefile.
Signed-off-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people might prefer to be able to specify the find utility to
use.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces "git-verify-tag.sh" with "builtin-verify-tag.c".
Testing relies on the "git tag -v" tests calling this command.
A temporary file is needed when calling to gpg, because git is
already creating detached signatures (gpg option -b) to sign tags
(instead of leaving gpg to add the signature to the file by itself),
and those signatures need to be supplied in a separate file to be
verified by gpg.
The program uses git_mkstemp to create that temporary file needed by
gpg, instead of the previously used "$GIT_DIR/.tmp-vtag", in order to
allow the command to be used in read-only repositories, and also
prevent other instances of git to read or remove the same file.
Signal SIGPIPE is ignored because the program sometimes was
terminated because that signal when writing the input for gpg.
The command now can receive many tag names to be verified.
Documentation is also updated here to reflect this new behaviour.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces the script "git-tag.sh" with "builtin-tag.c".
The existing test suite for "git tag" guarantees the compatibility
with the features provided by the script version.
There are some minor changes in the behaviour of "git tag" here:
"git tag -v" now can get more than one tag to verify, like "git tag -d" does,
"git tag" with no arguments prints all tags, more like "git branch" does,
and "git tag -n" also prints all tags with annotations (without needing -l).
Tests and documentation were also updated to reflect these changes.
The program is currently calling the script "git verify-tag" for verify.
This can be changed porting it to C and calling its functions directly
from builtin-tag.c.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 334d28ae factored out git.o as an intermediate stage between
git.c and git$X. However:
- It left some no-longer-relevant flags in the rule for git$X.
- It failed to replace git$X with git.o in the list of files that
record GIT_VERSION. This broke incorporation of a changed
GIT_VERSION into git$X because, when GIT_VERSION changes, git.o isn't
remade and git$X is relinked from the git.o that still contains the
old GIT_VERSION.
This patch removes the irrelevant flags and fixes incorporation of a
changed GIT_VERSION into git$X.
Signed-off-by: Matt McCutchen <hashproduct@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I realize that a lot of people use the "git-xyzzy" format, and we have
various historical reasons for it, but I also think that most people have
long since started thinking of the git command as a single command with
various subcommands, and we've long had the documentation talk about it
that way.
Slowly migrating away from the git-xyzzy format would allow us to
eventually no longer install hundreds of binaries (even if most of them
are symlinks or hardlinks) in users $PATH, and the _original_ reasons for
it (implementation issues and bash completion) are really long long gone.
Using "git xyzzy" also has some fundamental advantages, like the ability
to specify things like paging ("git -p xyzzy") and making the whole notion
of aliases act like other git commands (which they already do, but they do
*not* have a "git-xyzzy" form!)
Anyway, while actually removing the "git-xyzzy" things is not practical
right now, we can certainly start slowly to deprecate it internally inside
git itself - in the shell scripts we use, and the test vectors.
This patch adds a "remove-dashes" makefile target, which does that. It
isn't particularly efficient or smart, but it *does* successfully rewrite
a lot of our shell scripts to use the "git xyzzy" form for all built-in
commands.
(For non-builtins, the "git xyzzy" format implies an extra execve(), so
this script leaves those alone).
So apply this patch, and then run
make remove-dashes
make test
git commit -a
to generate a much larger patch that actually starts this transformation.
(The only half-way subtle thing about this is that it also fixes up
git-filter-branch.sh for the new world order by adding quoting around
the use of "git-commit-tree" as an argument. It doesn't need it in that
format, but when changed into "git commit-tree" it is no longer a single
word, and the quoting maintains the old behaviour).
NOTE! This does not yet mean that you can actually stop installing the
"git-xyzzy" binaries for the builtins. There are some remaining places
that want to use the old form, this just removes the most obvious ones
that can easily be done automatically.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ns/stash:
Documentation: quote {non-attributes} for asciidoc
git-stash: don't complain when listing in a repo with no stash
git-stash: fix "can't shift that many" with no arguments
git-stash: fix "no arguments" case in documentation
git-stash: require "save" to be explicit and update documentation
Document git-stash
Add git-stash script
* js/rebase:
Teach rebase -i about --preserve-merges
rebase -i: provide reasonable reflog for the rebased branch
rebase -i: several cleanups
ignore git-rebase--interactive
Teach rebase an interactive mode
Move the pick_author code to git-sh-setup
When my boss has something to show me and I have to update, for some
reason I am always in the middle of doing something else, and git pull
command refuses to work in such a case.
I wrote this little script to save the changes I made, perform the
update, and then come back to where I was, but on top of the updated
commit.
This is how you would use the script:
$ git stash
$ git pull
$ git stash apply
[jc: with a few fixlets from the list]
Signed-off-by: Nanako Shiraishi <nanako3@bluebottle.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't you just hate the fact sometimes, that git-rebase just applies
the patches, without any possibility to edit them, or rearrange them?
With "--interactive", git-rebase now lets you edit the list of patches,
so that you can reorder, edit and delete patches.
Such a list will typically look like this:
pick deadbee The oneline of this commit
pick fa1afe1 The oneline of the next commit
...
By replacing the command "pick" with the command "edit", you can amend
that patch and/or its commit message, and by replacing it with "squash"
you can tell rebase to fold that patch into the patch before that.
It is derived from the script sent to the list in
<Pine.LNX.4.63.0702252156190.22628@wbgn013.biozentrum.uni-wuerzburg.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/filter:
filter-branch: subdirectory filter needs --full-history
filter-branch: Simplify parent computation.
Teach filter-branch about subdirectory filtering
filter-branch: also don't fail in map() if a commit cannot be mapped
filter-branch: Use rev-list arguments to specify revision ranges.
filter-branch: fix behaviour of '-k'
filter-branch: use $(($i+1)) instead of $((i+1))
chmod +x git-filter-branch.sh
filter-branch: prevent filters from reading from stdin
t7003: make test repeatable
Add git-filter-branch
It turns out that the attribute definition we have had for a
long time to hide "^" character from AsciiDoc 7 was not honored
by AsciiDoc 8 even under "-a asciidoc7compatible" mode. There is
a similar breakage with the "compatible" mode with + characters.
The double colon at the end of definition list term needs
to be attached to the term, without a whitespace. After this
minimum fixups, AsciiDoc 8 (I used 8.2.1 on Debian) with
compatibility mode seems to produce reasonably good results.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function converts the value of h_errno (last error of name
resolver library, see netdb.h).
One of systems which supposedly do not have the function is SunOS.
POSIX does not mandate its presence.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All the other directory location variables do not have the trailing
slash.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent git-gui has the ability to determine the location of its library
files relative to the --exec-dir. Its Makefile enables this capability
depending on the install paths that are specified. However, without this
fix there is an extra slash in a path specification, so that the Makefile
does not recognize the equivalence of two paths that it compares.
A side-effect is that all "standard" builds (which do not set $(sharedir)
explicitly) now exploit above mentioned gut-gui feature.
Another side-effect is that an ugly compiled-in double-slash in
$(template_dir) is avoided.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the kernel we have a rule for *.c -> *.s files exactly because
it's nice to be able to easily say "ok, what does that generate".
Here's a patch to add such a rule to git too, in case anybody is
interested. It makes it much simpler to just do
make sha1_file.s
and look at the compiler-generated output that way, rather than having to
fire up gdb on the resulting binary.
(Add -fverbose-asm or something if you want to, it can make the result
even more readable)
[jc: add *.s to .gitignore]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This script is derived from Pasky's cg-admin-rewritehist.
In fact, it _is_ the same script, minimally adapted to work without cogito.
It _should_ be able to perform the same tasks, even if only relying on
core-git programs.
All the work is Pasky's, just the adaption is mine.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Hopefully-signed-off-by: Petr "cogito master" Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use a generic make rule to build all the test programs, rather than
specifically mentioning each one.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* db/remote:
Move refspec pattern matching to match_refs().
Update local tracking refs when pushing
Add handlers for fetch-side configuration of remotes.
Move refspec parser from connect.c and cache.h to remote.{c,h}
Move remote parsing into a library file out of builtin-push.
Those are builtins. Remove them from PROGRAMS variable
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This command can be used to initialize, update and inspect submodules. It
uses a .gitmodules file, readable by git-config, in the top level directory
of the 'superproject' to specify a mapping between submodule paths and
repository url.
Example .gitmodules layout:
[module "git"]
url = git://git.kernel.org/pub/scm/git/git.git
With this entry in .gitmodules (and a commit reference in the index entry for
the path "git"), the command 'git submodule init' will clone the repository
at kernel.org into the directory "git".
Known issues
============
There is currently no way to override the url found in the .gitmodules file,
except by manually creating the subproject repository. The place to fix this
in the script has a rather long comment about a possible plan.
Funny paths will be quoted in the output from git-ls-files, but git-submodule
does not attempt to unquote (or even detect the presence of) such paths.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I believe noone uses git-applymbox, and noone definitely should, since it
is supposed to be completely superseded and everything by its younger
cousin git-am. The only known person in the universe to use it was Linus
and he declared some time ago that he will try to use git-am instead in his
famous dotest script.
The trouble is that git-applymbox existence creates confusing UI. I'm a bit
like a recycled newbie to the git porcelain and *I* was confused by
git-applymbox primitiveness until I've realized a while later that I'm of
course using the wrong command.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The new parser is different from the one in builtin-push in two ways:
the default is to use the current branch's remote, if there is one,
before "origin"; and config is used in preference to remotes.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
HPA noticed that git-rebase fails when changes involve symlinks
in the middle of the hierarchy. Consider:
* The tree state before the patch is applied has arch/x86_64/boot
as a symlink pointing at ../i386/boot/
* The patch tries to remove arch/x86_64/boot symlink, and
create bunch of files there: .gitignore, Makefile, etc.
git-apply tries to be careful while applying patches; it never
touches the working tree until it is convinced that the patch
would apply cleanly. One of the check it does is that when it
knows a path is going to be created by the patch, it runs
lstat() on the path to make sure it does not exist.
This leads to a false alarm. Because we do not touch the
working tree before all the check passes, when we try to make
sure that arch/x86_64/boot/.gitignore does not exist yet, we
haven't removed the arch/x86_64/boot symlink. The lstat() check
ends up seeing arch/i386/boot/.gitignore through the
yet-to-be-removed symlink, and says "Hey, you already have a
file there, but what you fed me is a patch to create a new
file. I am not going to clobber what you have in the working
tree."
We have similar checks to see a file we are going to modify does
exist and match the preimage of the diff, which is done by
directly opening and reading the file.
For a file we are going to delete, we make sure that it does
exist and matches what is going to be removed (a removal patch
records the full preimage, so we check what you have in your
working tree matches it in full -- otherwise we would risk
losing your local changes), which again is done by directly
opening and reading the file.
These checks need to be adjusted so that they are not fooled by
symlinks in the middle.
- To make sure something does not exist, first lstat(). If it
does not exist, it does not, so be happy. If it _does_, we
might be getting fooled by a symlink in the middle, so break
leading paths and see if there are symlinks involved. When
we are checking for a path a/b/c/d, if any of a, a/b, a/b/c
is a symlink, then a/b/c/d does _NOT_ exist, for the purpose
of our test.
This would fix this particular case you saw, and would not
add extra overhead in the usual case.
- To make sure something already exists, first lstat(). If it
does not exist, barf (up to this, we already do). Even if it
does seem to exist, we might be getting fooled by a symlink
in the middle, so make sure leading paths are not symlinks.
This would make the normal codepath much more expensive for
deep trees, which is a bit worrisome.
This patch implements the first side of the check "making sure
it does not exist". The latter "making sure it exists" check is
not done yet, so applying the patch in reverse would still
fail, but we have to start from somewhere.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We already export these variables earlier in the Makefile, right
after they were 'declared'. There is no point in doing so again.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* 'master' of git://repo.or.cz/git-gui:
git-gui: Use vi-like keys in merge dialog
git-gui: Include commit id/subject in merge choices
git-gui: Show all possible branches for merge
git-gui: Move merge support into a namespace
git-gui: Allow vi keys to scroll the diff/blame regions
git-gui: Move console procs into their own namespace
git-gui: Refactor into multiple files to save my sanity
git-gui: Track our own embedded values and rebuild when they change
git-gui: Refactor to use our git proc more often
git-gui: Use option database defaults to set the font
git-gui: Cleanup common font handling for font_ui
git-gui: Correct line wrapping for too many branch message
git-gui: Warn users before making an octopus merge
git-gui: Include the subject in the status bar after commit
Also perform an evil merge change to update Git's main Makefile to
pass the proper options down into git-gui now that it depends on
reasonable values for 'sharedir' and 'TCL_PATH'.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I'm finding it difficult to work with a 6,000+ line Tcl script
and not go insane while looking for a particular block of code.
Since most of the program is organized into different units of
functionality and not all users will need all units immediately
on startup we can improve things by splitting procs out into
multiple files and let auto_load handle things for us.
This should help not only to better organize the source, but
it may also improve startup times for some users as the Tcl
parser does not need to read as much script before it can show
the UI. In many cases the user can avoid reading at least half
of git-gui now.
Unfortunately we now need a library directory in our runtime
location. This is currently assumed to be $(sharedir)/git-gui/lib
and its expected that the Makefile invoker will setup some sort of
reasonable sharedir value for us, or let us assume its going to be
$(gitexecdir)/../share.
We now also require a tclsh (in TCL_PATH) to just run the Makefile,
as we use tclsh to generate the tclIndex for our lib directory. I'm
hoping this is not an unncessary burden on end-users who are building
from source.
I haven't really made any functionality changes here, this is just a
huge migration of code from one file to many smaller files. All of
the new changes are to setup the library path and install the library
files.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Include a generalized fixup_pack_header_footer() in this new file.
Needed by git-repack --max-pack-size feature in a later patchset.
[sp: Moved close(pack_fd) to callers, to support index-pack, and
changed name to better indicate it is for packfiles.]
Signed-off-by: Dana L. How <danahow@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Like core-Git we now track the values that we embed into our shell
script wrapper, and we "recompile" that wrapper if they are changed.
This concept was lifted from git.git's Makefile, where a similar
thing was done by Eygene Ryabinkin. Too bad it wasn't just done
here in git-gui from the beginning, as the git.git Makefile support
for GIT-GUI-VARS was really just because git-gui doesn't do it on
its own.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This splits out a few functions to deal with mailmap from
shortlog and makes it a bit more usable from other programs.
Most notably, it does not clobber input e-mail address anymore.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Remove usernames from all commit messages, not just when using svmprops
applymbox & quiltimport: typofix.
Create a sysconfdir variable, and use it for ETC_GITCONFIG
ETC_GITCONFIG defaults to $(prefix)/etc/gitconfig, so if you just set
prefix=/usr, you end up with a git that looks in /usr/etc/gitconfig, rather
than /etc/gitconfig as specified by the FHS. Furthermore, setting
ETC_GITCONFIG does not fix the paths to any future system-wide configuration
files.
Factor out the path to the system-wide configuration directory into a variable
sysconfdir, normally set to $(prefix)/etc, but set to /etc when prefix=/usr .
This fixes the prefix=/usr problem for ETC_GITCONFIG, and allows centralized
configuration of any future system-wide configuration files without requiring
further action from package maintainers or other people building and
installing git.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead of having this code duplicated in multiple places, let's have
a common interface for progress display. If someday someone wishes to
display a cheezy progress bar instead then only one file will have to
be changed.
Note: I left merge-recursive.c out since it has a strange notion of
progress as it apparently increase the expected total number as it goes.
Someone with more intimate knowledge of what that is supposed to mean
might look at converting it to the common progress interface.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'jc/attr': (28 commits)
lockfile: record the primary process.
convert.c: restructure the attribute checking part.
Fix bogus linked-list management for user defined merge drivers.
Simplify calling of CR/LF conversion routines
Document gitattributes(5)
Update 'crlf' attribute semantics.
Documentation: support manual section (5) - file formats.
Simplify code to find recursive merge driver.
Counto-fix in merge-recursive
Fix funny types used in attribute value representation
Allow low-level driver to specify different behaviour during internal merge.
Custom low-level merge driver: change the configuration scheme.
Allow the default low-level merge driver to be configured.
Custom low-level merge driver support.
Add a demonstration/test of customized merge.
Allow specifying specialized merge-backend per path.
merge-recursive: separate out xdl_merge() interface.
Allow more than true/false to attributes.
Document git-check-attr
Change attribute negation marker from '!' to '-'.
...
* np/pack: (27 commits)
document --index-version for index-pack and pack-objects
pack-objects: remove obsolete comments
pack-objects: better check_object() performances
add get_size_from_delta()
pack-objects: make in_pack_header_size a variable of its own
pack-objects: get rid of create_final_object_list()
pack-objects: get rid of reuse_cached_pack
pack-objects: clean up list sorting
pack-objects: rework check_delta_limit usage
pack-objects: equal objects in size should delta against newer objects
pack-objects: optimize preferred base handling a bit
clean up add_object_entry()
tests for various pack index features
use test-genrandom in tests instead of /dev/urandom
simple random data generator for tests
validate reused pack data with CRC when possible
allow forcing index v2 and 64-bit offset treshold
pack-redundant.c: learn about index v2
show-index.c: learn about index v2
sha1_file.c: learn about index version 2
...
Mimick what we do for gitk. Since you do have a source file,
git-gui.sh, which is separate from the target, it should be much
easier in git-gui's Makefile.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This reverts commit e2a1bc67d3.
Junio rightly pointed out this patch doesn't handle the
`make install` target very well:
Junio C Hamano <junkio@cox.net> writes:
> You should never generate new files in the source tree from
> 'install' target. Otherwise, the usual pattern of "make" as
> yourself and then "make install" as root would not work from a
> "root-to-nobody-squashing" NFS mounted source tree to local
> filesystem. You should know better than accepting such a patch.
This allows you to add an arbitrary "decoration" of your choice to any
object. It's a space- and time-efficient way to add information to
arbitrary objects, especially if most objects probably do not have the
decoration.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I lost it by mistake while shuffling the gitattributes series which
originally was on top of the subproject topic onto the master branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds the basic infrastructure to assign attributes to
paths, in a way similar to what the exclusion mechanism does
based on $GIT_DIR/info/exclude and .gitignore files.
An attribute is just a simple string that does not contain any
whitespace. They can be specified in $GIT_DIR/info/attributes
file, and .gitattributes file in each directory.
Each line in these files defines a pattern matching rule.
Similar to the exclusion mechanism, a later match overrides an
earlier match in the same file, and entries from .gitattributes
file in the same directory takes precedence over the ones from
parent directories. Lines in $GIT_DIR/info/attributes file are
used as the lowest precedence default rules.
A line is either a comment (an empty line, or a line that begins
with a '#'), or a rule, which is a whitespace separated list of
tokens. The first token on the line is a shell glob pattern.
The rest are names of attributes, each of which can optionally
be prefixed with '!'. Such a line means "if a path matches this
glob, this attribute is set (or unset -- if the attribute name
is prefixed with '!'). For glob matching, the same "if the
pattern does not have a slash in it, the basename of the path is
matched with fnmatch(3) against the pattern, otherwise, the path
is matched with the pattern with FNM_PATHNAME" rule as the
exclusion mechanism is used.
This does not define what an attribute means. Tying an
attribute to various effects it has on git operation for paths
that have it will be specified separately.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/cherry:
Documentation: --cherry-pick
git-log --cherry-pick A...B
Refactor patch-id filtering out of git-cherry and git-format-patch.
Add %m to '--pretty=format:'
By default we are pretty quiet about the actual commands that
we are running. So we should continue to be quiet about the new
merge-subtree hardlink to merge-recursive. Technically this is not
a builtin, but it is close because subtree is actually builtin to
a non-builtin. So lets just make things easy and call it a builtin.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This implements the patch-id computation and recording library,
patch-ids.c, and rewrites the get_patch_ids() function used in
cherry and format-patch to use it, so that they do not pollute
the object namespace. Earlier code threw non-objects into the
in-core object database, and hoped for not getting bitten by
SHA-1 collisions. While it may be practically Ok, it still was
an ugly hack.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Reliance on /dev/urandom produces test vectors that are, well, random.
This can cause problems impossible to track down when the data is
different from one test invokation to another.
The goal is not to have random data to test, but rather to have a
convenient way to create sets of large files with non compressible and
non deltifiable data in a reproducible way.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This merge strategy largely piggy-backs on git-merge-recursive.
When merging trees A and B, if B corresponds to a subtree of A,
B is first adjusted to match the tree structure of A, instead of
reading the trees at the same level. This adjustment is also
done to the common ancestor tree.
If you are pulling updates from git-gui repository into git.git
repository, the root level of the former corresponds to git-gui/
subdirectory of the latter. The tree object of git-gui's toplevel
is wrapped in a fake tree object, whose sole entry has name 'git-gui'
and records object name of the true tree, before being used by
the 3-way merge code.
If you are merging the other way, only the git-gui/ subtree of
git.git is extracted and merged into git-gui's toplevel.
The detection of corresponding subtree is done by comparing the
pathnames and types in the toplevel of the tree.
Heuristics galore! That's the git way ;-).
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Documentation: tighten dependency for git.{html,txt}
Makefile: iconv() on Darwin has the old interface
t5300-pack-object.sh: portability issue using /usr/bin/stat
t3200-branch.sh: small language nit
usermanual.txt: some capitalization nits
Make builtin-branch.c handle the git config file
rename_ref(): only print a warning when config-file update fails
Distinguish branches by more than case in tests.
Avoid composing too long "References" header.
cvsimport: Improve formating consistency
cvsimport: Reorder options in documentation for better understanding
cvsimport: Improve usage error reporting
cvsimport: Improve documentation of CVSROOT and CVS module determination
cvsimport: sync usage lines with existing options
Conflicts:
Documentation/Makefile
The libiconv on Darwin uses the old iconv() interface (2nd argument is a
const char **, instead of a char **). Add OLD_ICONV to the Darwin
variable definitions to handle this.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Acked-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Fix lseek(2) calls with args 2 and 3 swapped
Honor -p<n> when applying git diffs
Fix dependency of common-cmds.h
Fix renaming branch without config file
DESTDIR support for git/contrib/emacs
gitweb: Fix bug in "blobdiff" view for split (e.g. file to symlink) patches
Document --left-right option to rev-list.
Revert "builtin-archive: use RUN_SETUP"
rename contrib/hooks/post-receieve-email to contrib/hooks/post-receive-email.
rerere: make sorting really stable.
Fix t4200-rerere for white-space from "wc -l"
GNU make does not include environment variables by default
in its namespace. Just pass them in make command line.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Makefile got one external option:
- TCLTK_PATH: the path to the Tcl/Tk interpreter.
Users (or build wrappers) may set this variable to the
location of the wish executable.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
--with-tcltk=/path/to/wish sets the TCLTK_PATH variable that is
used to substitute the location of the wish interpreter in the
Tcl/Tk programs.
New tracking file, GIT-GUI-VARS, was introduced: it tracks the
location of the Tcl/Tk interpreter and activates the GUI tools
rebuild if the interpreter path was changed. The separate tracker
is better than the GIT-CFLAGS: there is no need to rebuild the whole
git if the interpreter path was changed.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
--with-tcltk enables the search of the Tcl/Tk interpreter. If no
interpreter is found then Tcl/Tk dependend parts are disabled.
--without-tcltk unconditionally disables Tcl/Tk dependent parts.
The original behaviour is not changed: bare './configure' just
installs the Tcl/Tk part doing no checks for the interpreter.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Makefile knob named NO_TCLTK was introduced. It prevents the build
and installation of the Tcl/Tk dependent parts.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
WITH_P4IMPORT: enables the installation of the Perforce import
script.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
While running 'make test', the test-chmtime program is created, and should
be cleaned up on 'make clean'.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/fetch:
.gitignore: add git-fetch--tool
builtin-fetch--tool: fix reflog notes.
git-fetch: retire update-local-ref which is not used anymore.
builtin-fetch--tool: make sure not to overstep ls-remote-result buffer.
fetch--tool: fix uninitialized buffer when reading from stdin
builtin-fetch--tool: adjust to updated sha1_object_info().
git-fetch--tool takes flags before the subcommand.
Use stdin reflist passing in git-fetch.sh
Use stdin reflist passing in parse-remote
Allow fetch--tool to read from stdin
git-fetch: rewrite expand_ref_wildcard in C
git-fetch: rewrite another shell loop in C
git-fetch: move more code into C.
git-fetch--tool: start rewriting parts of git-fetch in C.
git-fetch: split fetch_main into fetch_dumb and fetch_native
The git-mergetool program can be used to automatically run an appropriate
merge resolution program to resolve merge conflicts. It will automatically
run one of kdiff3, tkdiff, meld, xxdiff, or emacs emerge programs.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Since git-gui 0.6.4 the credits file is no longer produced.
This file was removed from git-gui due to build issues that
a lot of users and Git developers have reported running into.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This reverts commit 871f4c97ad.
Too many users have complained about the credits generator in
git-gui, so I'm backing the entire thing out. This revert will
finish that series.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
