Since v1.7.0-rc2~11 (git-svn: persistent memoization, 2010-01-30),
git-svn has maintained some private per-repository caches in
.git/svn/.caches to avoid refetching and recalculating some
mergeinfo-related information with every 'git svn fetch'.
This memoization can cause problems, e.g consider the following case:
SVN repo:
... - a - b - c - m <- trunk
\ /
d - e <- branch1
The Git import of the above repo is at commit 'a' and doesn't know about
the branch1. In case of an 'git svn rebase', only the trunk of the
SVN repo is imported. During the creation of the git commit 'm', git svn
uses the svn:mergeinfo property and tries to find the corresponding git
commit 'e' to create 'm' with 'c' and 'e' as parents. But git svn rebase
only imports the current branch so commit 'e' is not imported.
Therefore git svn fails to create commit 'm' as a merge commit, because one
of its parents is not known to git. The imported history looks like this:
... - a - b - c - m <- trunk
A later 'git svn fetch' to import all branches can't rewrite the commit 'm'
to add 'e' as a parent and to make it a real git merge commit, because it
was already imported.
That's why the imported history misses the merge and looks like this:
... - a - b - c - m <- trunk
\
d - e <- branch1
Right now the only known workaround for importing 'm' as a merge is to
force reimporting 'm' again from SVN, e.g. via
$ git svn reset --revision $(git find-rev $c)
$ git svn fetch
Sadly, this is where the behavior has regressed: git svn reset doesn't
invalidate the old mergeinfo cache, which is no longer valid for the
reimport, which leads to 'm' beeing imprted with only 'c' as parent.
As solution to this problem, this commit invalidates the mergeinfo cache
to force correct recalculation of the parents.
During development of this patch, several ways for invalidating the cache
where considered. One of them is to use Memoize::flush_cache, which will
call the CLEAR method on the underlying Memoize persistency implementation.
Sadly, neither Memoize::Storable nor the newer Memoize::YAML module
introduced in 68f532f4ba could optionally be used implement the
CLEAR method, so this is not an option.
Reseting the internal hash used to store the memoized values has the same
problem, because it calls the non-existing CLEAR method of the
underlying persistency layer, too.
Considering this and taking into account the different implementations
of the memoization modules, where Memoize::Storable is not in our control,
implementing the missing CLEAR method is not an option, at least not if
Memoize::Storable is still used.
Therefore the easiest solution to clear the cache is to delete the files
on disk in 'git svn reset'. Normally, deleting the files behind the back
of the memoization module would be problematic, because the in-memory
representation would still exist and contain wrong data. Fortunately, the
memoization is active in memory only for a small portion of the code.
Invalidating the cache by deleting the files on disk if it isn't active
should be safe.
Signed-off-by: Peter Baumann <waste.manager@gmx.de>
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
dcommit didn't handle errors returned by SVN and coped very
poorly with concurrent commits that appear in SVN repository
while dcommit was running. In both cases it left git repository
in inconsistent state: index (which was reset with `git reset
--mixed' after a successful commit to SVN) no longer matched the
checkouted tree, when the following commit failed or needed to be
rebased. See http://bugs.debian.org/676904 for examples.
This patch fixes the issues by:
- introducing error handler for dcommit. The handler will try
to rebase or reset working tree before returning error to the
end user. dcommit_rebase function was extracted out of cmd_dcommit
to ensure consistency between cmd_dcommit and the error handler.
- calling `git reset --mixed' only once after all patches are
successfully committed to SVN. This ensures index is not touched
for most of the time of dcommit run.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Add test cases for 'git rebase --keep-empty' with and without an
"empty" commit already in upstream. The empty commit that is about to
be rebased should be kept in both cases.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The standard output channel of receive-pack is a structured protocol
channel, and subprocesses must never be allowed to leak anything
into it by writing to their standard output.
Use RUN_COMMAND_STDOUT_TO_STDERR option to run_command_v_opt() just
like we do when running hooks to prevent output from "gc" leaking to
the standard output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When receive-pack triggers 'git gc --auto' and 'git prune' is called to
remove a stale temporary object, 'git prune' prints an informational
message to stdout about the file that it will remove. Since this message
is written to stdout, it is sent back over the transport channel to the git
client which tries to interpret it as part of the pack protocol and then
promptly terminates with a complaint about a protocol error.
Introduce a test which exercises the auto-gc functionality of receive-pack
and demonstrates this breakage.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Scripts such as "git rebase -i" cannot currently cherry-pick commits
which have an empty commit message, as git cherry-pick calls git
commit without the --allow-empty-message option.
Add an --allow-empty-message option to git cherry-pick which is passed
through to git commit, so this behaviour can be overridden.
Signed-off-by: Chris Webb <chris@arachsys.com>
Reviewed-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a file that ends with an incomplete line is expressed as a
complete rewrite with the -B option, git diff incorrectly
appends the incomplete line indicator "\ No newline at end of
file" after such a line, rather than writing it on a line of its
own (the output codepath for normal output without -B does not
have this problem). Add a LF after the incomplete line before
writing the "\ No newline ..." out to fix this.
Add a couple of tests to confirm that the indicator comment is
generated on its own line in both plain diff and rewrite mode.
Signed-off-by: Adam Butcher <dev.lists@jessamine.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King wrote:
The seq command is GNU-ism, and is missing at least in older BSD
releases and their derivatives, not to mention antique
commercial Unixes.
We already purged it in b3431bc (Don't use seq in tests, not
everyone has it, 2007-05-02), but a few new instances have crept
in. They went unnoticed because they are in scripts that are not
run by default.
Replace them with test_seq that is implemented with a Perl snippet
(proposed by Jeff). This is better than inlining this snippet
everywhere it's needed because it's easier to read and it's easier
to change the implementation (e.g. to C) if we ever decide to remove
Perl from the test suite.
Note that test_seq is not a complete replacement for seq(1). It
just has what we need now, in addition that it makes it possible for
us to do something like "test_seq a m" if we wanted to in the
future.
There are also many places that do `for i in 1 2 3 ...` but I'm not sure
if it's worth converting them to test_seq. That would introduce running
more processes of Perl.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The grep.extendedRegexp configuration setting enables the -E flag on grep
by default but there are no equivalents for the -G, -F and -P flags.
Rather than adding an additional setting for grep.fooRegexp for current
and future pattern matching options, add a grep.patternType setting that
can accept appropriate values for modifying the default grep pattern
matching behavior. The current values are "basic", "extended", "fixed",
"perl" and "default" for setting -G, -E, -F, -P and the default behavior
respectively.
When grep.patternType is set to a value other than "default", the
grep.extendedRegexp setting is ignored. The value of "default" restores
the current default behavior, including the grep.extendedRegexp
behavior.
Signed-off-by: J Smith <dark.panda@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the ad-hoc versions.
This is mostly to normalize the process and ensure the URLs produced
don't have double slashes or anything.
Also provides a place to fix the corner case where a file path
contains a percent sign.
[ew: commit title]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Previously, our URL canonicalization didn't do much of anything.
Now it actually escapes and collapses slashes. This is mostly a cut & paste
of escape_url from git-svn.
This is closer to how SVN 1.7's canonicalization behaves. Doing it with
1.6 lets us chase down some problems caused by more effective canonicalization
without having to deal with all the other 1.7 issues on top of that.
* Remote URLs have to be canonicalized otherwise Git::SVN->find_existing_remote
will think they're different.
* The SVN remote is now written to the git config canonicalized. That
should be ok. Adjust a test to account for that.
[ew: commit title]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Test to check that the migration got rid of the old style git-svn directory.
It wasn't failing, just throwing a message to STDERR.
[ew: commit title]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
SVN 1.7 will truncate "not-a%40{0}" to just "not-a".
Rather than guess what SVN is going to do for each version, make the test use
the branch name that was actually created.
[ew: commit title]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Otherwise you might wind up with things like...
my $path1 = undef;
my $path2 = 'foo';
my $path = $path1 . '/' . $path2;
creating '/foo'. Or this...
my $path1 = 'foo/';
my $path2 = 'bar';
my $path = $path1 . '/' . $path2;
creating 'foo//bar'.
Could have used File::Spec, but I'm shying away from it due to SVN
1.7's pickiness about paths. Felt it would be better to have our own
we can control completely.
[ew: commit title]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The SVN API functions will not accept ../foo but their canonicalization
functions will not collapse it. So we'll have to do it ourselves.
_collapse_dotdot() works better than the existing regex did.
This will be used shortly when canonicalize_path() starts using the
SVN API.
[ew: commit title]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The RFC2047 unquoting, used to parse email addresses in From and Cc
headers, is broken in several ways:
* It erroneously substitutes ' ' for '_' in *the whole* header, even
outside the quoted field. [Noticed by Christoph.]
* It is too liberal in its matching, and happily matches the start
of one quoted chunk against the end of another, or even just
something that looks like such an end. [Noticed by Junio.]
* It fundamentally cannot cope with encodings that are not a
superset of ASCII, nor several (incompatible) encodings in the
same header.
This patch fixes the first two by doing a more careful decoding of
the outer quoting (e.g. "=AB" to represent an octet whose value is
0xAB). Fixing the fundamental issues is left for a future, more
intrusive, patch.
Noticed-by: Christoph Miebach <christoph.miebach@web.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add i18n support for scripted Porcelains, and mark strings in
merge(-recursive), am, and rebase for i18n.
* jx/i18n-1.7.11:
i18n: merge-recursive: mark strings for translation
Remove dead code which contains bad gettext block
i18n: am: mark more strings for translation
rebase: remove obsolete and unused LONG_USAGE which breaks xgettext
i18n: Rewrite gettext messages start with dash
i18n: rebase: mark messages for translation
i18n: New keywords for xgettext extraction from sh
"git commit-tree" learned a more natural "-p <parent> <tree>" order
of arguments long time ago, but recently forgot it by mistake.
* kk/maint-commit-tree:
Revert "git-commit-tree(1): update synopsis"
commit-tree: resurrect command line parsing updates
"git diff --no-ext-diff" did not output anything for a typechange
filepair when GIT_EXTERNAL_DIFF is in effect.
* jv/maint-no-ext-diff:
diff: test precedence of external diff drivers
diff: correctly disable external_diff with --no-ext-diff
When "git submodule add" clones a submodule repository, it can get
confused where to store the resulting submodule repository in the
superproject's .git/ directory when there is a symbolic link in the
path to the current directory.
* jl/maint-1.7.10-recurse-submodules-with-symlink:
submodules: don't stumble over symbolic links when cloning recursively
In 1.7.9 era, we taught "git rebase" about the raw timestamp format
but we did not teach the same trick to "filter-branch", which rolled
a similar logic on its own.
* jc/maint-filter-branch-epoch-date:
t7003: add test to filter a branch with a commit at epoch
date.c: Fix off by one error in object-header date parsing
filter-branch: do not forget the '@' prefix to force git-timestamp
"git grep" stopped spawning an external "grep" long time ago, but a
duplicated test to check internal and external "grep" was left
behind.
* rj/maint-grep-remove-redundant-test:
t7810-*.sh: Remove redundant test
Finishing touches to the new test script.
* dg/submodule-in-dismembered-working-tree:
t7409: make sure submodule is initialized and updated in more detail
The earlier test did not even make sure that the correct commit is
checked out in the submodule directory. Inspect the result in a bit
more detail.
Signed-off-by: Daniel Graña <dangra@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test happened to use "rev-parse --max-count=1 HEAD" consistently
to prepare the expected output and the actual output, so the
comparison between them gave us a correct success/failure because
both output had irrelevant "--max-count=1" in it.
But that is not an excuse to keep it broken. Replace it a more
meaningful construct "rev-parse --verify HEAD".
Noticed by Daniel Graña while working on his submodule tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit bbc09c22 ("grep: rip out support for external grep",
12-01-2010), test number 60 ("grep -C1 hunk mark between files") is
essentially the same as test number 59.
Test 59 was intended to verify the behaviour of git-grep resulting
from multiple invocations of an external grep. As part of the test,
it creates and adds 1024 files to the index, which is now wasted
effort.
Remove test 59, since it is now redundant.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, the final test ('flags and then non flags') fails
intermittently, depending on how much time elapsed between the
invocations of "git commit-tree" when creating the commits which
later have their commit id's compared. For example, if the commits
for childid-3 and childid-4 are created 1 or more seconds apart,
then the commits, which would otherwise be identical, will have
different commit id's.
In order to make the test reproducible, we remove the variability
by setting the author and committer times to a well defined state.
We accomplish this with a single call to 'test_tick' at the start
of the test.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Short of somebody happening to beat the 1 in 2^160 odds of
actually generating content that hashes to the null sha1, we
should never see this value in a tree entry. So let's have
fsck warn if it it seen.
As in the previous commit, we test both blob and submodule
entries to future-proof the test suite against the
implementation depending on connectivity to notice the
error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We should never need to write the null sha1 into an index
entry (short of the 1 in 2^160 chance that somebody actually
has content that hashes to it). If we attempt to do so, it
is much more likely that it is a bug, since we use the null
sha1 as a sentinel value to mean "not valid".
The presence of null sha1s in the index (which can come
from, among other things, "update-index --cacheinfo", or by
reading a corrupted tree) can cause problems for later
readers, because they cannot distinguish the literal null
sha1 from its use a sentinel value. For example, "git
diff-files" on such an entry would make it appear as if it
is stat-dirty, and until recently, the diff code assumed
such an entry meant that we should be diffing a working tree
file rather than a blob.
Ideally, we would stop such entries from entering even our
in-core index. However, we do sometimes legitimately add
entries with null sha1s in order to represent these sentinel
situations; simply forbidding them in add_index_entry breaks
a lot of the existing code. However, we can at least make
sure that our in-core sentinel representation never makes it
to disk.
To be thorough, we will test an attempt to add both a blob
and a submodule entry. In the former case, we might run into
problems anyway because we will be missing the blob object.
But in the latter case, we do not enforce connectivity
across gitlink entries, making this our only point of
enforcement. The current implementation does not care which
type of entry we are seeing, but testing both cases helps
future-proof the test suite in case that changes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff code represents paths using the diff_filespec
struct. This struct has a sha1 to represent the sha1 of the
content at that path, as well as a sha1_valid member which
indicates whether its sha1 field is actually useful. If
sha1_valid is not true, then the filespec represents a
working tree file (e.g., for the no-index case, or for when
the index is not up-to-date).
The diff_filespec is only used internally, though. At the
interfaces to the diff subsystem, callers feed the sha1
directly, and we create a diff_filespec from it. It's at
that point that we look at the sha1 and decide whether it is
valid or not; callers may pass the null sha1 as a sentinel
value to indicate that it is not.
We should not typically see the null sha1 coming from any
other source (e.g., in the index itself, or from a tree).
However, a corrupt tree might have a null sha1, which would
cause "diff --patch" to accidentally diff the working tree
version of a file instead of treating it as a blob.
This patch extends the edges of the diff interface to accept
a "sha1_valid" flag whenever we accept a sha1, and to use
that flag when creating a filespec. In some cases, this
means passing the flag through several layers, making the
code change larger than would be desirable.
One alternative would be to simply die() upon seeing
corrupted trees with null sha1s. However, this fix more
directly addresses the problem (while bogus sha1s in a tree
are probably a bad thing, it is really the sentinel
confusion sending us down the wrong code path that is what
makes it devastating). And it means that git is more capable
of examining and debugging these corrupted trees. For
example, you can still "diff --raw" such a tree to find out
when the bogus entry was introduced; you just cannot do a
"--patch" diff (just as you could not with any other
corrupted tree, as we do not have any content to diff).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'extract-remaining' of git://git.bogomips.org/git-svn:
Extract Git::SVN::GlobSpec from git-svn.
Move Git::IndexInfo into its own file.
Load all the modules in one place and before running code.
Extract Git::SVN::Migration from git-svn.
Prepare Git::SVN::Migration for extraction from git-svn.
Extract Git::SVN::Log from git-svn.
Prepare Git::SVN::Log for extraction from git-svn.
* git://git.bogomips.org/git-svn:
Move initialization of Git::SVN variables into Git::SVN.
Extract Git::SVN from git-svn into its own .pm file.
Prepare Git::SVN for extraction into its own file.
Extract some utilities from git-svn to allow extracting Git::SVN.
perl: detect new files in MakeMaker builds
The Makefile.PL will now find .pm files itself.
Don't lose Error.pm if $@ gets clobbered.
Quiet warning if Makefile.PL is run with -w and no --localedir
Fix test breakages by a builder who does not have a valid user name
in his /etc/password entry.
* jk/autoident-test:
t7502: test early quit from commit with bad ident
t7502: handle systems where auto-identity is broken
t7502: drop confusing test_might_fail call
t7502: narrow checks for author/committer name in template
t7502: properly quote GIT_EDITOR
t7502: clean up fake_editor tests
In a superproject that has repository outside of its working tree,
"git submodule add" failed to clone a new submodule, as GIT_DIR and
GIT_WORK_TREE environment variables necessary to work in such a
superproject interfered with access to the submodule repository.
* dg/submodule-in-dismembered-working-tree:
git-submodule: work with GIT_DIR/GIT_WORK_TREE
Straight cut & paste. That's the last class.
* Make Git::SVN load it on its own, its the only thing that needs it.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Put them in a new module called Git::SVN::Utils. Yeah, not terribly
original and it will be a dumping ground. But its better than having
them in the main git-svn program. At least they can be documented
and tested.
* fatal() is used by many classes.
* Change the $can_compress lexical into a function.
This should be enough to extract Git::SVN.
Signed-off-by: Michael G. Schwern <schwern@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
UTF8 behaviour of the filesystem (conversion from nfd to nfc) plays a
role in several tests and is tested in several tests. Therefore, move
the test from t0050 into the test lib and use the prerequisite in t0050.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Case insensitivity plays a role in several tests and is tested in several
tests. Therefore, move the test from t003 into the test lib and use the
prerequisite in t0003.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test prerequisite mechanism is a useful way to allow some tests
in a test script to be skipped in environments that do not support
certain features (e.g. it is pointless to attempt checking how well
symbolic links are handled by Git on filesystems that do not support
them). It is OK for commonly used prerequisites to be always tested
during start-up of a test script by having a codeblock that tests a
feature and calls test_set_prereq, but for an uncommon feature,
forcing 90% of scripts to pay the same probing overhead for
prerequisite they do not care about is wasteful.
Introduce a mechanism to probe the prerequiste lazily. Changes are:
- test_lazy_prereq () function, which takes the name of the
prerequisite it probes and the script to probe for it, is
added. This only registers the name of the prerequiste that can
be lazily probed and the script to eval (without running).
- test_have_prereq() function (which is used by test_expect_success
and also can be called directly by test scripts) learns to look
at the list of prerequisites that can be lazily probed, and the
prerequisites that have already been probed that way. When asked
for a prerequiste that can be but haven't been probed, the script
registered with an earlier call to test_lazy_prereq is evaluated
and the prerequisite is set.
- test_run_lazy_prereq_() function is a helper to run the probe
script with the same kind of sandbox as regular tests, helped by
Jeff King.
Update the codeblock to probe and set SYMLINKS prerequisite using
the new mechanism as an example.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All other shell variables that are used to globally keep track of
states related to prerequisite have "prereq" somewhere in their
names. Be consistent and avoid potential name crashes with other
kinds of satisfaction in the future.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark strings in merge-recursive for translation.
Some tests would start to fail with GETTEXT_POISON turned on after
this update. Use test_i18ncmp and test_i18ngrep where appropriate
to mark strings that should only be checked in the C locale output
to avoid such issues.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettext message in a shell script should not start with '-', one
workaround is adding '--' between gettext and the message, like:
gettext -- "--exec option ..."
But due to a bug in the xgettext extraction, xgettext can not
extract the actual message for this case. Rewriting the message
is a simpler and better solution.
Reported-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit f20f387, "git commit" notices and dies much
earlier when we have a bogus commit identity. That commit
did not add a test because we cannot do so reliably (namely,
we can only trigger the behavior on a system where the
automatically generated identity is bogus). However, now
that we have a prerequisite check for this feature, we can
add a test that will at least run on systems that produce
such a bogus identity.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test t7502.21 checks whether we write the committer name
into COMMIT_EDITMSG when it has been automatically
determined. However, not all systems can produce valid
automatic identities.
Prior to f20f387 (commit: check committer identity more
strictly), this test worked even when we did not have a
valid automatic identity, since it did not run the strict
test until after we had generated the template. That commit
tightened the check to fail early (since we would fail
later, anyway), meaning that systems without a valid GECOS
name or hostname would fail the test.
We cannot just work around this, because it depends on
configuration outside the control of the test script.
Therefore we introduce a new test_prerequisite to run this
test only on systems where automatic ident works at all.
As a result, we can drop the confusing test_must_fail bit
from the test. The intent was that by giving "git commit"
invalid input (namely, nothing to commit), that it would
stop at a predictable point, whether we had a valid identity
or not, from which we could view the contents of
COMMIT_EDITMSG. Since that assumption no longer holds, and
we can only run the test when we have a valid identity,
there is no reason not to let commit run to completion. That
lets us be more robust to other unforeseen failures.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t7502.20, we run "git commit" and check that it warns us
that the author and committer identity are not the same
(this is always the case in the test environment, since we
set up the idents differently).
Instead of actually making a commit, we have a clean index,
so the "git commit" we run will fail. This is marked as
might_fail, which is not really correct; it will always fail
since there is nothing to commit.
However, the only reason not to do a complete commit would
be to see the intermediate state of the COMMIT_EDITMSG file
when the commit is not completed. We don't need to care
about this, though; even a complete commit will leave
COMMIT_EDITMSG for us to view. By doing a real commit and
dropping the might_fail, we are more robust against other
unforeseen failures of "git commit" that might influence our
test result.
It might seem less robust to depend on the fact that "git
commit" leaves COMMIT_EDITMSG in place after a successful
commit. However, that brings this test in line with others
parts of the script, which make the same assumption.
Furthermore, if that ever does change, the right solution is
not to prevent commit from completing, but to set EDITOR to
a script that will record the contents we see. After all,
the point of these tests is to check what the user sees in
their EDITOR, so that would be the most direct test. For
now, though, we can continue to use the "shortcut" that
COMMIT_EDITMSG is left intact.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7502.20 and t7502.21 check that the author and committer
name are mentioned in the commit message template under
certain circumstances. However, they end up checking a much
larger and unnecessary portion of the template. Let's narrow
their checks to the specific lines.
While we're at it, let's give these tests more descriptive
names, so their purposes are more obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the tests tries to ensure that editor is not run due
to an early failure. However, it needs to quote the pathname
of the trash directory used in $GIT_EDITOR, since git will
pass it along to the shell. In other words, the test would
pass whether the code was correct or not, since the unquoted
editor specification would never run.
We never noticed the problem because the code is indeed
correct, so git-commit never even tried to run the editor.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using write_script saves us a few lines of code, and means
we consistently use $SHELL_PATH.
We can also drop the setting of the $pwd variable from
$(pwd). In the first instance, there is no reason to use it
(we can just use $(pwd) directly two lines later, since we
are interpolating the here-document). In the second
instance, it is totally pointless and probably just a
cut-and-paste from the first instance.
Finally, we can use a non-interpolating here document for
the final script, which saves some quoting.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reorders t/test-lib.sh so that we dot-source GIT-BUILD-OPTIONS that
records the shell and Perl the user told us to use with Git a lot
early, so that test-lib.sh script itself can use "$PERL_PATH" in
one of its early operations.
* jc/test-lib-source-build-options-early:
test-lib: reorder and include GIT-BUILD-OPTIONS a lot earlier
Finishing touches to the XDG support (new feature for 1.7.12) and
tests.
* mm/config-xdg:
t1306: check that XDG_CONFIG_HOME works
ignore: make sure we have an xdg path before using it
attr: make sure we have an xdg path before using it
test-lib.sh: unset XDG_CONFIG_HOME
The combination of GIT_DIR and GIT_WORK_TREE can be used to manage
files in one directory hierarchy while keeping the repository that
keeps track of them outside the directory hierarchy. For example:
git init --bare /path/to/there
alias dotfiles="GIT_DIR=/path/to/there GIT_WORK_TREE=/path/to/here git"
cd /path/to/here
dotfiles add file
dotfiles commit -a -m "add /path/to/here/file"
...
lets you manage files under /path/to/here/ in the repository located
at /path/to/there.
git-submodule however fails to add submodules, as it is confused by
GIT_DIR and GIT_WORK_TREE environment variables when it tries to
work in the submodule, like so:
dotfiles submodule add http://path.to/submodule
fatal: working tree '/path/to/here' already exists.
Simply unsetting the environment where the command works on the
submodule is sufficient to fix this, as it has set things up so
that GIT_DIR and GIT_WORK_TREE do not even have to point at the
repository and the working tree of the submodule.
Signed-off-by: Daniel Graña <dangra@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark messages in git-rebase.sh for translation. While doing this
Jonathan noticed that the comma usage and sentence structure of the
resolvemsg was not quite right, so correct that and its cousins in
git-am.sh and t/t0201-gettext-fallbacks.sh at the same time.
Some tests would start to fail with GETTEXT_POISON turned on after
this update. Use test_i18ncmp and test_i18ngrep where appropriate
to mark strings that should only be checked in the C locale output
to avoid such issues.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running the http tests with valgrind does not work for two
reasons:
1. Apache complains about following the symbolic link from
git-http-backend to valgrind.sh.
2. Apache does not pass through the GIT_VALGRIND variable
to the backend CGI.
This patch fixes both problems. Unfortunately, there is a
slight hack we need to handle passing environment variables
through Apache. If we just tell it:
PassEnv GIT_VALGRIND
then Apache will complain when GIT_VALGRIND is not set. If
we try:
SetEnv GIT_VALGRIND ${GIT_VALGRIND}
then when GIT_VALGRIND is not set, it will pass through the
literal "${GIT_VALGRIND}". Instead, we now unconditionally
pass through GIT_VALGRIND from lib-httpd.sh into apache,
even if it is empty.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a bug with git rebase -i --root when a fixup or squash line is
applied to the new root. We attempt to amend the commit onto which they
apply with git reset --soft HEAD^ followed by a normal commit. Unlike a
real commit --amend, this sequence will fail against a root commit as it
has no parent.
Fix rebase -i to use commit --amend for fixup and squash instead, and
add a test for the case of a fixup of the root commit.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should override $HOME/.config, but we never actually tested it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e3ebc35 (config: fix several access(NULL) calls, 2012-07-12) was
fixing access(NULL) calls when trying to access $HOME/.config/git/config,
but missed the ones when trying to access $HOME/.config/git/ignore. Fix
and test this.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we don't have a core.attributesfile configured, we fall
back to checking XDG config, which is usually
$HOME/.config/git/attributes.
However, if $HOME is unset, then home_config_paths will return
NULL, and we end up calling fopen(NULL).
Depending on your system, this may or may not cause the
accompanying test to fail (e.g., on Linux and glibc, the
address will go straight to open, which will return EFAULT).
However, valgrind will reliably notice the error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that git respects XDG_CONFIG_HOME for some lookups, we
must be sure to cleanse the test environment. Otherwise, the
user's XDG_CONFIG_HOME could influence the test results.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --no-ext-diff" did not output anything for a typechange
filepair when GIT_EXTERNAL_DIFF is in effect.
* jv/maint-no-ext-diff:
diff: test precedence of external diff drivers
diff: correctly disable external_diff with --no-ext-diff
"commit --amend" used to refuse amending a commit with an empty log
message, with or without "--allow-empty-message".
* cw/amend-commit-without-message:
Allow edit of empty message with commit --amend
"git commit --amend --only --" was meant to allow "Clever" people to
rewrite the commit message without making any change even when they
have already changes for the next commit added to their index, but
it never worked as advertised since it was introduced in 1.3.0 era.
* jk/maint-commit-amend-only-no-paths:
commit: fix "--amend --only" with no pathspec
Even though the index can record pathnames longer than 1<<12 bytes,
in some places we were not comparing them in full, potentially
replacing index entries instead of adding.
* tg/maint-cache-name-compare:
cache_name_compare(): do not truncate while comparing paths
"git show"'s auto-walking behaviour was an unreliable and
unpredictable hack; it now behaves just like "git log" does when it
walks.
* tr/maint-show-walk:
show: fix "range implies walking"
Demonstrate git-show is broken with ranges
"git diff", "git status" and anything that internally uses the
comparison machinery was utterly broken when the difference
involved a file with "-" as its name. This was due to the way "git
diff --no-index" was incorrectly bolted on to the system, making
any comparison that involves a file "-" at the root level
incorrectly read from the standard input.
* jc/refactor-diff-stdin:
diff-index.c: "git diff" has no need to read blob from the standard input
diff-index.c: unify handling of command line paths
diff-index.c: do not pretend paths are pathspecs
We did not have test to make sure "git rebase" without extra options
filters out an empty commit in the original history.
* mz/empty-rebase-test:
add test case for rebase of empty commit
"git fast-export" produced an input stream for fast-import without
properly quoting pathnames when they contain SPs in them.
* js/fast-export-paths-with-spaces:
fast-export: quote paths with spaces
"git checkout --detach", when you are still on an unborn branch,
should be forbidden, but it wasn't.
* cw/no-detaching-an-unborn:
git-checkout: disallow --detach on unborn branch
Some implementations of Perl terminates "lines" with CRLF even when
the script is operating on just a sequence of bytes. Make sure to
use "$PERL_PATH", the version of Perl the user told Git to use, in
our tests to avoid unnecessary breakages in tests.
* vr/use-our-perl-in-tests:
t/README: add a bit more Don'ts
tests: enclose $PERL_PATH in double quotes
t/test-lib.sh: export PERL_PATH for use in scripts
t: Replace 'perl' by $PERL_PATH
* as/t4012-style-updates:
t4012: Use test_must_fail instead of if-else
t4012: use 'printf' instead of 'dd' to generate a binary file
t4012: Re-indent test snippets
t4012: Make --shortstat test more robust
t4012: Break up pipe into serial redirections
t4012: Actually quote the sed script
t4012: Unquote git command fragment in test title
t4012: modernize style for quoting
When "git submodule add" clones a submodule repository, it can get
confused where to store the resulting submodule repository in the
superproject's .git/ directory when there is a symbolic link in the
path to the current directory.
* jl/maint-1.7.10-recurse-submodules-with-symlink:
submodules: don't stumble over symbolic links when cloning recursively
Teaches the object name parser things like a "git describe" output
is always a commit object, "A" in "git log A" must be a committish,
and "A" and "B" in "git log A...B" both must be committish, etc., to
prolong the lifetime of abbreviated object names.
* jc/sha1-name-more: (27 commits)
t1512: match the "other" object names
t1512: ignore whitespaces in wc -l output
rev-parse --disambiguate=<prefix>
rev-parse: A and B in "rev-parse A..B" refer to committish
reset: the command takes committish
commit-tree: the command wants a tree and commits
apply: --build-fake-ancestor expects blobs
sha1_name.c: add support for disambiguating other types
revision.c: the "log" family, except for "show", takes committish
revision.c: allow handle_revision_arg() to take other flags
sha1_name.c: introduce get_sha1_committish()
sha1_name.c: teach lookup context to get_sha1_with_context()
sha1_name.c: many short names can only be committish
sha1_name.c: get_sha1_1() takes lookup flags
sha1_name.c: get_describe_name() by definition groks only commits
sha1_name.c: teach get_short_sha1() a commit-only option
sha1_name.c: allow get_short_sha1() to take other flags
get_sha1(): fix error status regression
sha1_name.c: restructure disambiguation of short names
sha1_name.c: correct misnamed "canonical" and "res"
...
In 1.7.9 era, we taught "git rebase" about the raw timestamp format
but we did not teach the same trick to "filter-branch", which rolled
a similar logic on its own. Because of this, "filter-branch" failed
to rewrite commits with ancient timestamps.
* jc/maint-filter-branch-epoch-date:
t7003: add test to filter a branch with a commit at epoch
date.c: Fix off by one error in object-header date parsing
filter-branch: do not forget the '@' prefix to force git-timestamp
There are three ways to specify an external diff command:
GIT_EXTERNAL_DIFF in the environment, diff.external in the
config, or a "diff" gitattribute. The current order of
precedence is:
1. gitattribute
2. GIT_EXTERNAL_DIFF
3. diff.external
Usually our rule is that environment variables should take
precedence over on-disk config (i.e., option 2 should come
before option 1). However, this situation is trickier than
some, because option 1 is more specific to the individual
file than option 2 (which affects all files), so it might be
preferable. So the current behavior can be seen as
implementing "do the specific thing if we can, but fall back
to this general thing".
This is probably not what we would do if we were writing git
from scratch, but it has been this way for several years,
and is not worth changing. So let's at least document that
this is the way it's supposed to work with a test.
While we're there, let's also make sure that diff.external
(which was not previously tested at all) works by running it
through the same tests as GIT_EXTERNAL_DIFF.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Upon seeing a type-change filepair, "diff --no-ext-diff" does not
show the usual "deletion followed by addition" split patch and does
not run the external diff driver either.
This is because the logic to disable external diff was placed at a
wrong level in the callchain. run_diff_cmd() decides to show the
split patch only when external diff driver is not configured or
specified via GIT_EXTERNAL_DIFF environment, but this is done before
checking if --no-ext-diff was given. To make things worse,
run_diff_cmd() checks --no-ext-diff and disables the output for such
a filepair completely, as the callchain below it (e.g. builtin_diff)
does not want to handle typechange filepairs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
79a9312 (commit-tree: update the command line parsing, 2011-11-09)
updated the command line parser to understand the usual "flags first
and then non-flag arguments" order, in addition to the original and
a bit unusual "tree comes first and then zero or more -p <parent>".
Unfortunately, ba3c69a (commit: teach --gpg-sign option, 2011-10-05)
broke it by mistake. Resurrect it, and protect the feature with a
test from future breakages.
Noticed by Keshav Kini
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the code less bulky and easier to read. Also do not overlook
failures like e.g. git failing because of unexpected signals.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For some reason, 'echo X | dd bs=1k seek=1' creates a file with 2050 bytes
on Windows instead of the expected 1026 bytes, so that a test fails. Since
the actual contents of the file are irrelevant as long as there is at
least one zero byte so that the diff machinery recognizes it as binary,
use printf to generate it.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most one-level indents were 1 HT (horizontal tab) followed by 1 SP.
Remove the SP.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --shortstat test depends on the same scenario as the --stat
test. Use the part of the same expected result for the --stat test
to avoid duplicating it manually.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not hide possible git errors by masking its process
exit status.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The nested quoting is not needed in this cases, thus the previous
version did work just fine. Nevertheless the usage is misleading,
so just achieve nested quoting by using double quotes instead. Lower
the probability of breakage in the future and make the code easier
to read.
NOTE: Just dropping the single quotes around the sed arguments would
have also been possible.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the index can record pathnames longer than 1<<12 bytes,
in some places we were not comparing them in full, potentially
replacing index entries instead of adding.
* tg/maint-cache-name-compare:
cache_name_compare(): do not truncate while comparing paths
"git commit --amend --only --" was meant to allow "Clever" people to
rewrite the commit message without making any change even when they
have already changes for the next commit added to their index, but
it never worked as advertised since it was introduced in 1.3.0 era.
* jk/maint-commit-amend-only-no-paths:
commit: fix "--amend --only" with no pathspec
"commit --amend" used to refuse amending a commit with an empty log
message, with or without "--allow-empty-message".
* cw/amend-commit-without-message:
Allow edit of empty message with commit --amend
"git apply" learned to wiggle the base version and perform three-way
merge when a patch does not exactly apply to the version you have.
* jc/apply-3way:
apply: tests for the --3way option
apply: document --3way option
apply: allow rerere() to work on --3way results
apply: register conflicted stages to the index
apply: --3way with add/add conflict
apply: move verify_index_match() higher
apply: plug the three-way merge logic in
apply: fall back on three-way merge
apply: accept -3/--3way command line option
apply: move "already exists" logic to check_to_create()
apply: move check_to_create_blob() closer to its sole caller
apply: further split load_preimage()
apply: refactor "previous patch" logic
apply: split load_preimage() helper function out
apply: factor out checkout_target() helper function
apply: refactor read_file_or_gitlink()
apply: clear_image() clears things a bit more
apply: a bit more comments on PATH_TO_BE_DELETED
apply: fix an incomplete comment in check_patch()
"git rebase [-i] --root $tip" can now be used to rewrite all the
history down to the root.
* cw/rebase-i-root:
t3404: make test 57 work with dash and others
Add tests for rebase -i --root without --onto
rebase -i: support --root without --onto
Teach "git p4" to notice "Jobs:" in the log message and relay it to
Perforce to trigger its "jobs" support.
# By Pete Wyckoff
* pw/git-p4-jobs:
git p4: notice Jobs lines in git commit messages
git p4 test: refactor marshal_dump
git p4: remove unused P4Submit interactive setting
Due to the way "git diff --no-index" is bolted onto by touching the
low level code that is shared with the rest of the "git diff" code,
even though it has to work in a very different way, any comparison
that involves a file "-" at the root level incorrectly tried to read
from the standard input. This cleans up the no-index codepath
further to remove code that reads from the standard input from the
core side, which is never necessary when git is running its usual
diff operation.
* jc/refactor-diff-stdin:
diff-index.c: "git diff" has no need to read blob from the standard input
diff-index.c: unify handling of command line paths
diff-index.c: do not pretend paths are pathspecs
Teaches git to normalize pathnames read from readdir(3) and all
arguments from the command line into precomposed UTF-8 (assuming
that they come as decomposed UTF-8) to work around issues on Mac OS.
I think there still are other places that need conversion
(e.g. paths that are read from stdin for some commands), but this
should be a good first step in the right direction.
* tb/sanitize-decomposed-utf-8-pathname:
git on Mac OS and precomposed unicode
